Providing Regulatory Submissions in Electronic Format-Certain Human Pharmaceutical Product Applications and Related Submissions Using the Electronic Common Technical Document Specifications; Guidance for Industry; Availability, 26057-26058 [2015-10539]
Download as PDF
Federal Register / Vol. 80, No. 87 / Wednesday, May 6, 2015 / Notices
DEPARTMENT OF HEALTH AND
HUMAN SERVICES
Food and Drug Administration
[Docket No. FDA–2014–N–1006]
Providing Regulatory Submissions in
Electronic Format—Certain Human
Pharmaceutical Product Applications
and Related Submissions Using the
Electronic Common Technical
Document Specifications; Guidance
for Industry; Availability
AGENCY:
Food and Drug Administration,
HHS.
ACTION:
Notice.
The Food and Drug
Administration (FDA) is announcing the
availability of a guidance for industry
entitled ‘‘Providing Regulatory
Submissions in Electronic Format—
Certain Human Pharmaceutical Product
Applications and Related Submissions
Using the Electronic Common Technical
Document Specifications.’’ The
guidance is being issued in accordance
with the Food and Drug Administration
Safety and Innovation Act (FDASIA),
which amended the Federal Food, Drug,
and Cosmetic Act (the FD&C Act) to
require that certain submissions under
the FD&C Act and Public Health Service
Act (PHS Act) be submitted in
electronic format, beginning no earlier
than 24 months after issuance of final
guidance on that topic. The guidance
outlines Electronic Common Technical
Document (eCTD) specification
requirements for submissions to new
drug applications (NDAs), abbreviated
new drug applications (ANDAs), certain
biologics license applications (BLAs),
and certain investigational new drug
applications (INDs).
DATES: Submit either electronic or
written comments on Agency guidances
at any time.
ADDRESSES: Submit written requests for
single copies of the documents to the
Division of Drug Information, Center for
Drug Evaluation and Research (CDER),
Food and Drug Administration, 10903
New Hampshire Ave., Bldg. 51, Rm.
2201, Silver Spring, MD 20993–0002; or
the Office of Communication, Outreach
and Development, Center for Biologics
Evaluation and Research (CBER), Food
and Drug Administration, 10903 New
Hampshire Avenue, Bldg. 71, Rm. 3128,
Silver Spring, MD 20993–0002. Send
one self-addressed adhesive label to
assist that office in processing your
requests. See the SUPPLEMENTARY
INFORMATION section for electronic
access to the documents.
Submit electronic comments on the
guidance to https://www.regulations.gov.
tkelley on DSK3SPTVN1PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
18:43 May 05, 2015
Jkt 235001
Submit written comments to the
Division of Dockets Management (HFA–
305), Food and Drug Administration,
5630 Fishers Lane, Rm. 1061, Rockville,
MD 20852.
FOR FURTHER INFORMATION CONTACT:
Virginia Hussong, Center for Drug
Evaluation and Research, Food and
Drug Administration, 10903 New
Hampshire Ave., Bldg. 22, Rm. 1132,
Silver Spring, MD 20993, email:
virginia.hussong@fda.hhs.gov; or
Stephen Ripley, Center for Biologics
Evaluation and Research, Food and
Drug Administration, Bldg. 71, Rm.
7301, Silver Spring, MD 20993, 240–
402–7911.
SUPPLEMENTARY INFORMATION:
I. Background
FDASIA (Pub. L. 112–144), signed by
the President on July 9, 2012, amended
the FD&C Act to add section 745A (21
U.S.C. 379k–1), entitled ‘‘Electronic
Format for Submissions.’’ Section
745A(a)(1) of the FD&C Act requires that
submissions under section 505(b), (i), or
(j) of the FD&C Act (21 U.S.C. 355(b), (i),
or (j)) and submissions under sections
351(a) or (k) of the PHS Act (42 U.S.C.
262(a) or (k)) be submitted to FDA in
electronic format no earlier than 24
months after FDA issues final guidance
on that topic.
In accordance with section 745A(a)(1)
of the FD&C Act, FDA is issuing this
guidance, announcing its determination
that submission types identified in this
guidance must be submitted
electronically (except for submissions
that are exempted) in the format
specified in this guidance.
This guidance (and the technical
specification documents it incorporates
by reference) describes how
submissions under section 745A(a) of
the FD&C Act must be organized and
submitted in electronic format using
eCTD specifications listed in the FDA
Data Standards Catalog (https://
www.fda.gov/forindustry/
datastandards/studydatastandards/
default.htm). For more information
concerning how the FDA interprets
section 745A(a), see the guidance for
industry ‘‘Providing Regulatory
Submissions in Electronic Format—
Submissions Under Section745A(a) of
the Federal Food, Drug, and Cosmetic
Act’’ (available at https://www.fda.gov/
drugs/guidancecompliance
regulatoryinformation/guidances/
default.htm). The eCTD is an
International Conference on
Harmonization (ICH) format based on
specifications developed by ICH and its
member parties. FDA’s CDER and CBER
have been receiving submissions in the
PO 00000
Frm 00063
Fmt 4703
Sfmt 4703
26057
eCTD format since 2003, and eCTD has
been the recommended format for
electronic submissions to CDER and
CBER since January 1, 2008. The
majority of new electronic submissions
are now received in eCTD format.
This guidance finalizes and replaces
the previous 2013 draft guidance on
eCTD specifications. This supersedes
the guidance for industry entitled
‘‘Providing Regulatory Submissions in
Electronic Format—Human
Pharmaceutical Product Applications
and Related Submissions Using the
eCTD Specifications’’ that was issued in
June 2008. This guidance is applicable
to all submissions within the scope of
section 745A(a) of the FD&C Act, i.e.,
NDAs, ANDAs, certain BLAs, and
certain INDs and all subsequent
submissions, including amendments,
supplements, and reports, to these
submission types. This guidance is not
applicable to submissions for blood and
blood components, including Source
Plasma.
In the Federal Register of July 25,
2014 (79 FR 43494), FDA announced the
availability of the revised draft guidance
entitled ‘‘Providing Regulatory
Submissions in Electronic Format—
Certain Human Pharmaceutical Product
Applications and Related Submissions
Using the Electronic Common Technical
Document Specifications.’’ The
comment period on the revised draft
guidance ended on September 23, 2014.
We reviewed all comments received on
the draft guidance and revised several
sections of the guidance. The updates
include:
Section I: Clarified that in addition to
this guidance and existing technical
specifications, more detailed technical
instructions will be issued in the form
of a technical conformance guide.
Section III.A: (1) Clarified which INDs
and BLAs are addressed in this
guidance. Specifically, a footnote was
added to clarify the meaning of
‘‘certain’’ in the context of BLAs and
INDs and states that the guidance is not
applicable to INDs for devices that are
regulated by CBER as biological
products under Section 351 of the PHS
Act and to INDs that are
noncommercial. Further, the guidance is
not applicable to those devices that are
regulated by CBER as biological
products under Section 351 of the PHS
Act. Examples are provided in this
regard. (2) Clarified that FDA considers
master files to be submissions to an
NDA, ANDA, BLA, or IND, and
therefore to fall within the scope of
requirements set forth in section
745A(a). These include new drug master
files (DMFs) (21 CFR 314.420), new
biological product files (BPFs) (21 CFR
E:\FR\FM\06MYN1.SGM
06MYN1
26058
Federal Register / Vol. 80, No. 87 / Wednesday, May 6, 2015 / Notices
tkelley on DSK3SPTVN1PROD with NOTICES
601.51), and any amendments to or
annual reports on previously submitted
DMFs or BPFs. This guidance also
applies to submissions for drug/device
combination products filed pursuant to
section 505 of the FD&C Act or
subsection (a) or (k) of section 351 of the
PHS Act.
Section Technical Specification
Documents Incorporated by Reference:
Provides a list of documents
incorporated by reference into this
guidance and provides a complete
listing of technical supportive files on
the FDA eCTD Web page at https://
www.fda.gov/Drugs/
DevelopmentApprovalProcess/
FormsSubmissionRequirements/
ElectronicSubmissions/ucm153574.htm.
We also received a comment
concerning the implementation timeline
for the Portable Document Format (PDF)
technical specification. As discussed in
the guidance for industry ‘‘Providing
Regulatory Submissions in Electronic
Format—Submissions Under Section
745A(a) of the Federal Food, Drug, and
Cosmetic Act,’’ certain technical
specifications are required no earlier
than 2 years after the final guidance is
published.
This guidance implements the
electronic submission requirements of
section 745A(a) of the FD&C Act by
specifying the format for electronic
submissions. All submissions submitted
24 months after the publication of this
guidance must use the appropriate FDAsupported eCTD specifications for NDA,
ANDA, and certain BLA submissions.
Certain IND submissions must use the
FDA-supported eCTD specifications for
electronic submissions submitted 36
months after publication of this
guidance.
In section 745A(a) of the FD&C Act,
Congress granted explicit authorization
to FDA to implement the statutory
electronic submission requirements by
specifying the format for such
submissions in guidance. Because this
guidance provides such requirements
under section 745A(a) of the FD&C Act,
indicated by the use of the words must
or required, it is not subject to the usual
restrictions in FDA’s good guidance
practice regulations, such as the
requirement that guidances not establish
legally enforceable responsibilities. See
21 CFR 10.115(d).
II. Paperwork Reduction Act of 1995
This guidance refers to previously
approved collections of information that
are subject to review by the Office of
Management and Budget (OMB) under
the Paperwork Reduction Act of 1995
(44 U.S.C. 3501–3520). The guidance
pertains to sponsors and applicants
VerDate Sep<11>2014
18:43 May 05, 2015
Jkt 235001
making regulatory submissions to FDA
in electronic format for NDAs, ANDAs,
BLAs, INDs, master files, and
advertising and promotional labeling.
The information collection discussed in
the guidance is contained in our IND
regulations (21 CFR part 312) and
approved under OMB control number
0910–0014, our NDA regulations
(including ANDAs) (21 CFR part 314)
and approved under OMB control
number 0910–0001, and our BLA
regulations (21 CFR part 601) and
approved under OMB control number
0910–0338.
Sponsors and applicants have been
submitting NDAs, ANDAs, BLAs, INDs,
and master files electronically since
2003, and the majority of these
submissions are already received in
electronic format. Under section
745A(a) of the FD&C Act, sponsors and
applicants are required to file most of
these submissions electronically. These
requirements will be phased in over 2and 3-year periods after the issuance of
this guidance.
For some sponsors and applicants,
there may be new costs, including
capital costs or operating and
maintenance costs, which would result
from the requirements under FDASIA
and this guidance, because some
sponsors and applicants may have to
upgrade eCTD specifications and/or
change their method of submitting
information to FDA. FDA estimates that,
for some sponsors and applicants, the
costs may be as follows:
• eCTD Publishing Software: $25,000
to $150,000
• Publishing Operations Support:
$50,000 to $1 million
• Training: $5,000 to $50,000
III. Comments
Interested persons may submit either
electronic comments to https://
www.regulations.gov or written
comments regarding this document to
the Division of Dockets Management
(see ADDRESSES). It is only necessary to
send one set of comments. Identify
comments with the docket number
found in brackets in the heading of this
document. Received comments may be
seen in the Division of Dockets
Management between 9 a.m. and 4 p.m.,
Monday through Friday, and will be
posted to the docket at https://
www.regulations.gov.
IV. Electronic Access
Persons with access to the Internet
may obtain the document at https://
www.fda.gov/Drugs/Guidance
ComplianceRegulatoryInformation/
Guidances/default.htm, https://
www.fda.gov/BiologicsBloodVaccines/
PO 00000
Frm 00064
Fmt 4703
Sfmt 4703
GuidanceCompliance
RegulatoryInformation/Guidances/
default.htm, or https://
www.regulations.gov.
Dated: April 30, 2015.
Leslie Kux,
Associate Commissioner for Policy.
[FR Doc. 2015–10539 Filed 5–5–15; 8:45 am]
BILLING CODE 4164–01–P
DEPARTMENT OF HEALTH AND
HUMAN SERVICES
Food and Drug Administration
[Docket No. FDA–2015–D–1245]
Waiver of In Vivo Bioavailability and
Bioequivalence Studies for ImmediateRelease Solid Oral Dosage Forms
Based on a Biopharmaceutics
Classification System; Draft Guidance
for Industry; Availability
AGENCY:
Food and Drug Administration,
HHS.
ACTION:
Notice.
The Food and Drug
Administration (FDA) is announcing the
availability of a draft guidance for
industry entitled ‘‘Waiver of In Vivo
Bioavailability and Bioequivalence
Studies for Immediate-Release Solid
Oral Dosage Forms Based on a
Biopharmaceutics Classification
System.’’ This guidance provides
recommendations for sponsors of
investigational new drug applications
(INDs), and applicants that submit new
drug applications, abbreviated new drug
applications (ANDAs), and supplements
to these applications for immediaterelease (IR) solid oral dosage forms, and
who wish to request a waiver of in vivo
bioavailability (BA) and/or
bioequivalence (BE) studies.
DATES: Although you can comment on
any guidance at any time (see 21 CFR
10.115(g)(5)), to ensure that the Agency
considers your comment on this draft
guidance before it begins work on the
final version of the guidance, submit
either electronic or written comments
on the draft guidance by July 6, 2015.
ADDRESSES: Submit written requests for
single copies of the draft guidance to the
Division of Drug Information, Center for
Drug Evaluation and Research, Food
and Drug Administration, 10001 New
Hampshire Ave., Hillandale Building,
4th Floor, Silver Spring, MD 20993–
0002. Send one self-addressed adhesive
label to assist that office in processing
your requests. See the SUPPLEMENTARY
INFORMATION section for electronic
access to the draft guidance document.
SUMMARY:
E:\FR\FM\06MYN1.SGM
06MYN1
Agencies
[Federal Register Volume 80, Number 87 (Wednesday, May 6, 2015)]
[Notices]
[Pages 26057-26058]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-10539]
[[Page 26057]]
-----------------------------------------------------------------------
DEPARTMENT OF HEALTH AND HUMAN SERVICES
Food and Drug Administration
[Docket No. FDA-2014-N-1006]
Providing Regulatory Submissions in Electronic Format--Certain
Human Pharmaceutical Product Applications and Related Submissions Using
the Electronic Common Technical Document Specifications; Guidance for
Industry; Availability
AGENCY: Food and Drug Administration, HHS.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: The Food and Drug Administration (FDA) is announcing the
availability of a guidance for industry entitled ``Providing Regulatory
Submissions in Electronic Format--Certain Human Pharmaceutical Product
Applications and Related Submissions Using the Electronic Common
Technical Document Specifications.'' The guidance is being issued in
accordance with the Food and Drug Administration Safety and Innovation
Act (FDASIA), which amended the Federal Food, Drug, and Cosmetic Act
(the FD&C Act) to require that certain submissions under the FD&C Act
and Public Health Service Act (PHS Act) be submitted in electronic
format, beginning no earlier than 24 months after issuance of final
guidance on that topic. The guidance outlines Electronic Common
Technical Document (eCTD) specification requirements for submissions to
new drug applications (NDAs), abbreviated new drug applications
(ANDAs), certain biologics license applications (BLAs), and certain
investigational new drug applications (INDs).
DATES: Submit either electronic or written comments on Agency guidances
at any time.
ADDRESSES: Submit written requests for single copies of the documents
to the Division of Drug Information, Center for Drug Evaluation and
Research (CDER), Food and Drug Administration, 10903 New Hampshire
Ave., Bldg. 51, Rm. 2201, Silver Spring, MD 20993-0002; or the Office
of Communication, Outreach and Development, Center for Biologics
Evaluation and Research (CBER), Food and Drug Administration, 10903 New
Hampshire Avenue, Bldg. 71, Rm. 3128, Silver Spring, MD 20993-0002.
Send one self-addressed adhesive label to assist that office in
processing your requests. See the SUPPLEMENTARY INFORMATION section for
electronic access to the documents.
Submit electronic comments on the guidance to https://www.regulations.gov. Submit written comments to the Division of Dockets
Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane,
Rm. 1061, Rockville, MD 20852.
FOR FURTHER INFORMATION CONTACT: Virginia Hussong, Center for Drug
Evaluation and Research, Food and Drug Administration, 10903 New
Hampshire Ave., Bldg. 22, Rm. 1132, Silver Spring, MD 20993, email:
virginia.hussong@fda.hhs.gov; or Stephen Ripley, Center for Biologics
Evaluation and Research, Food and Drug Administration, Bldg. 71, Rm.
7301, Silver Spring, MD 20993, 240-402-7911.
SUPPLEMENTARY INFORMATION:
I. Background
FDASIA (Pub. L. 112-144), signed by the President on July 9, 2012,
amended the FD&C Act to add section 745A (21 U.S.C. 379k-1), entitled
``Electronic Format for Submissions.'' Section 745A(a)(1) of the FD&C
Act requires that submissions under section 505(b), (i), or (j) of the
FD&C Act (21 U.S.C. 355(b), (i), or (j)) and submissions under sections
351(a) or (k) of the PHS Act (42 U.S.C. 262(a) or (k)) be submitted to
FDA in electronic format no earlier than 24 months after FDA issues
final guidance on that topic.
In accordance with section 745A(a)(1) of the FD&C Act, FDA is
issuing this guidance, announcing its determination that submission
types identified in this guidance must be submitted electronically
(except for submissions that are exempted) in the format specified in
this guidance.
This guidance (and the technical specification documents it
incorporates by reference) describes how submissions under section
745A(a) of the FD&C Act must be organized and submitted in electronic
format using eCTD specifications listed in the FDA Data Standards
Catalog (https://www.fda.gov/forindustry/datastandards/studydatastandards/default.htm). For more information concerning how
the FDA interprets section 745A(a), see the guidance for industry
``Providing Regulatory Submissions in Electronic Format--Submissions
Under Section745A(a) of the Federal Food, Drug, and Cosmetic Act''
(available at https://www.fda.gov/drugs/guidancecomplianceregulatoryinformation/guidances/default.htm). The
eCTD is an International Conference on Harmonization (ICH) format based
on specifications developed by ICH and its member parties. FDA's CDER
and CBER have been receiving submissions in the eCTD format since 2003,
and eCTD has been the recommended format for electronic submissions to
CDER and CBER since January 1, 2008. The majority of new electronic
submissions are now received in eCTD format.
This guidance finalizes and replaces the previous 2013 draft
guidance on eCTD specifications. This supersedes the guidance for
industry entitled ``Providing Regulatory Submissions in Electronic
Format--Human Pharmaceutical Product Applications and Related
Submissions Using the eCTD Specifications'' that was issued in June
2008. This guidance is applicable to all submissions within the scope
of section 745A(a) of the FD&C Act, i.e., NDAs, ANDAs, certain BLAs,
and certain INDs and all subsequent submissions, including amendments,
supplements, and reports, to these submission types. This guidance is
not applicable to submissions for blood and blood components, including
Source Plasma.
In the Federal Register of July 25, 2014 (79 FR 43494), FDA
announced the availability of the revised draft guidance entitled
``Providing Regulatory Submissions in Electronic Format--Certain Human
Pharmaceutical Product Applications and Related Submissions Using the
Electronic Common Technical Document Specifications.'' The comment
period on the revised draft guidance ended on September 23, 2014. We
reviewed all comments received on the draft guidance and revised
several sections of the guidance. The updates include:
Section I: Clarified that in addition to this guidance and existing
technical specifications, more detailed technical instructions will be
issued in the form of a technical conformance guide.
Section III.A: (1) Clarified which INDs and BLAs are addressed in
this guidance. Specifically, a footnote was added to clarify the
meaning of ``certain'' in the context of BLAs and INDs and states that
the guidance is not applicable to INDs for devices that are regulated
by CBER as biological products under Section 351 of the PHS Act and to
INDs that are noncommercial. Further, the guidance is not applicable to
those devices that are regulated by CBER as biological products under
Section 351 of the PHS Act. Examples are provided in this regard. (2)
Clarified that FDA considers master files to be submissions to an NDA,
ANDA, BLA, or IND, and therefore to fall within the scope of
requirements set forth in section 745A(a). These include new drug
master files (DMFs) (21 CFR 314.420), new biological product files
(BPFs) (21 CFR
[[Page 26058]]
601.51), and any amendments to or annual reports on previously
submitted DMFs or BPFs. This guidance also applies to submissions for
drug/device combination products filed pursuant to section 505 of the
FD&C Act or subsection (a) or (k) of section 351 of the PHS Act.
Section Technical Specification Documents Incorporated by
Reference: Provides a list of documents incorporated by reference into
this guidance and provides a complete listing of technical supportive
files on the FDA eCTD Web page at https://www.fda.gov/Drugs/DevelopmentApprovalProcess/FormsSubmissionRequirements/ElectronicSubmissions/ucm153574.htm.
We also received a comment concerning the implementation timeline
for the Portable Document Format (PDF) technical specification. As
discussed in the guidance for industry ``Providing Regulatory
Submissions in Electronic Format--Submissions Under Section 745A(a) of
the Federal Food, Drug, and Cosmetic Act,'' certain technical
specifications are required no earlier than 2 years after the final
guidance is published.
This guidance implements the electronic submission requirements of
section 745A(a) of the FD&C Act by specifying the format for electronic
submissions. All submissions submitted 24 months after the publication
of this guidance must use the appropriate FDA-supported eCTD
specifications for NDA, ANDA, and certain BLA submissions. Certain IND
submissions must use the FDA-supported eCTD specifications for
electronic submissions submitted 36 months after publication of this
guidance.
In section 745A(a) of the FD&C Act, Congress granted explicit
authorization to FDA to implement the statutory electronic submission
requirements by specifying the format for such submissions in guidance.
Because this guidance provides such requirements under section 745A(a)
of the FD&C Act, indicated by the use of the words must or required, it
is not subject to the usual restrictions in FDA's good guidance
practice regulations, such as the requirement that guidances not
establish legally enforceable responsibilities. See 21 CFR 10.115(d).
II. Paperwork Reduction Act of 1995
This guidance refers to previously approved collections of
information that are subject to review by the Office of Management and
Budget (OMB) under the Paperwork Reduction Act of 1995 (44 U.S.C. 3501-
3520). The guidance pertains to sponsors and applicants making
regulatory submissions to FDA in electronic format for NDAs, ANDAs,
BLAs, INDs, master files, and advertising and promotional labeling. The
information collection discussed in the guidance is contained in our
IND regulations (21 CFR part 312) and approved under OMB control number
0910-0014, our NDA regulations (including ANDAs) (21 CFR part 314) and
approved under OMB control number 0910-0001, and our BLA regulations
(21 CFR part 601) and approved under OMB control number 0910-0338.
Sponsors and applicants have been submitting NDAs, ANDAs, BLAs,
INDs, and master files electronically since 2003, and the majority of
these submissions are already received in electronic format. Under
section 745A(a) of the FD&C Act, sponsors and applicants are required
to file most of these submissions electronically. These requirements
will be phased in over 2- and 3-year periods after the issuance of this
guidance.
For some sponsors and applicants, there may be new costs, including
capital costs or operating and maintenance costs, which would result
from the requirements under FDASIA and this guidance, because some
sponsors and applicants may have to upgrade eCTD specifications and/or
change their method of submitting information to FDA. FDA estimates
that, for some sponsors and applicants, the costs may be as follows:
eCTD Publishing Software: $25,000 to $150,000
Publishing Operations Support: $50,000 to $1 million
Training: $5,000 to $50,000
III. Comments
Interested persons may submit either electronic comments to https://www.regulations.gov or written comments regarding this document to the
Division of Dockets Management (see ADDRESSES). It is only necessary to
send one set of comments. Identify comments with the docket number
found in brackets in the heading of this document. Received comments
may be seen in the Division of Dockets Management between 9 a.m. and 4
p.m., Monday through Friday, and will be posted to the docket at https://www.regulations.gov.
IV. Electronic Access
Persons with access to the Internet may obtain the document at
https://www.fda.gov/Drugs/GuidanceComplianceRegulatoryInformation/
Guidances/default.htm, https://www.fda.gov/BiologicsBloodVaccines/GuidanceComplianceRegulatoryInformation/Guidances/default.htm, or
https://www.regulations.gov.
Dated: April 30, 2015.
Leslie Kux,
Associate Commissioner for Policy.
[FR Doc. 2015-10539 Filed 5-5-15; 8:45 am]
BILLING CODE 4164-01-P