Energy Conservation Program: Test Procedure for Pumps; Correction, 22939 [2015-09566]
Download as PDF
<![CDATA[
Federal Register / Vol. 80, No. 79 / Friday, April 24, 2015 / Proposed Rules
On April 1, 2015, the U.S.
Department of Energy (DOE) published
in the Federal Register a notice of
proposed rulemaking and public
meeting for Energy Conservation
Program: Test Procedure for Pumps.
This document corrects terms in four
equations.
SUMMARY:
DEPARTMENT OF ENERGY
10 CFR Parts 429 and 431
[Docket No. EERE–2013–BT–TP–0055]
RIN 1905–AD50
Energy Conservation Program: Test
Procedure for Pumps; Correction
Office of Energy Efficiency and
Renewable Energy, Department of
Energy.
ACTION: Notice of proposed rulemaking
and public meeting; correction.
AGENCY:
Appendix A to Subpart Y of Part 431—
Uniform Test Method for the
Measurement of Energy Consumption of
Pumps. [Corrected]
2. On page 17645: The equation in
section II.B.1.1.1 is corrected by
DATES:
April 24, 2015.
FOR FURTHER INFORMATION CONTACT:
Ashley Armstrong, U.S. Department of
Energy, Office of Energy Efficiency and
Renewable Energy, Building
Technologies Office, EE–5B, 1000
removing ‘‘13.46’’ and adding in its
place ‘‘17.80’’. The corrected equation
reads as follows:
hpump,STD = ¥0.85 * In(Q100%)2 ¥ 0.38 *
In(NS) * In(Q100%) ¥ 11.48 * In(NS)2
+ 17.80 * In(Q100%) + 179.80 *
In(NS) ¥ (C ¥ 555.6)
[Docket No. FAA–2015–0831; Directorate
Identifier 2014–NM–061–AD]
BILLING CODE 6450–01–P
Federal Aviation Administration
14 CFR Part 39
RIN 2120–AA64
tkelley on DSK3SPTVN1PROD with PROPOSALS
3. On page 17646: The equation in
section III.D.1.2.1 is corrected by
removing ‘‘MotorH’’ and adding in its
place ‘‘MotorHP’’. The corrected
equation reads as follows:
Airworthiness Directives; Airbus
Airplanes
Federal Aviation
Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking
(NPRM).
AGENCY:
VerDate Sep<11>2014
17:05 Apr 23, 2015
Jkt 235001
PO 00000
Frm 00013
Fmt 4702
Sfmt 4702
We propose to adopt a new
airworthiness directive (AD) for all
Airbus Model A318, A319, A320, and
A321 series airplanes. This proposed
AD was prompted by a report of a
rupture of a main landing gear (MLG)
sliding tube axle. This proposed AD
would require an inspection to identify
the part number and serial number of
the MLG sliding tubes installed on the
airplane; and an inspection of the axle
on certain MLG sliding tubes for burned
areas, and replacement of the sliding
tube if necessary. We are proposing this
AD to detect and correct cracks in the
axle and (partial) detachment of the axle
and wheel from the sliding tube, which
could result in failure of an MLG.
SUMMARY:
E:\FR\FM\24APP1.SGM
24APP1
EP24AP15.002</GPH>
[FR Doc. 2015–09566 Filed 4–23–15; 8:45 am]
In the Federal Register published on
April 1, 2015, in FR Doc. 2015–06945,
make the following corrections:
1. On page 17604: Equation (6) is
corrected by removing ‘‘13.46’’ and
adding in its place ‘‘17.80’’. The
corrected equation reads as follows:
EP24AP15.001</GPH>
DEPARTMENT OF TRANSPORTATION
Corrections
adding in its place ‘‘MotorHP’’. The
corrected equation reads as follows:
Issued in Washington, DC, on April 20,
2015.
Kathleen B. Hogan,
Deputy Assistant Secretary for Energy
Efficiency, Energy Efficiency and Renewable
Energy.
Independence Avenue SW.,
Washington, DC 20585–0121.
Telephone: (202) 586–6590. Email:
ashley.armstrong@ee.doe.gov.
EP24AP15.017</GPH>
4. On page 17648: The equation in
section V.D.1.2.1 is corrected by
removing ‘‘MotorHPMotorH’’ and
22939
]]>Agencies
[Federal Register Volume 80, Number 79 (Friday, April 24, 2015)]
[Proposed Rules]
[Page 22939]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-09566]
[[Page 22939]]
-----------------------------------------------------------------------
DEPARTMENT OF ENERGY
10 CFR Parts 429 and 431
[Docket No. EERE-2013-BT-TP-0055]
RIN 1905-AD50
Energy Conservation Program: Test Procedure for Pumps; Correction
AGENCY: Office of Energy Efficiency and Renewable Energy, Department of
Energy.
ACTION: Notice of proposed rulemaking and public meeting; correction.
-----------------------------------------------------------------------
SUMMARY: On April 1, 2015, the U.S. Department of Energy (DOE)
published in the Federal Register a notice of proposed rulemaking and
public meeting for Energy Conservation Program: Test Procedure for
Pumps. This document corrects terms in four equations.
DATES: April 24, 2015.
FOR FURTHER INFORMATION CONTACT: Ashley Armstrong, U.S. Department of
Energy, Office of Energy Efficiency and Renewable Energy, Building
Technologies Office, EE-5B, 1000 Independence Avenue SW., Washington,
DC 20585-0121. Telephone: (202) 586-6590. Email:
ashley.armstrong@ee.doe.gov.
Corrections
In the Federal Register published on April 1, 2015, in FR Doc.
2015-06945, make the following corrections:
1. On page 17604: Equation (6) is corrected by removing ``13.46''
and adding in its place ``17.80''. The corrected equation reads as
follows:
[GRAPHIC] [TIFF OMITTED] TP24AP15.017
Appendix A to Subpart Y of Part 431--Uniform Test Method for the
Measurement of Energy Consumption of Pumps. [Corrected]
2. On page 17645: The equation in section II.B.1.1.1 is corrected
by removing ``13.46'' and adding in its place ``17.80''. The corrected
equation reads as follows:
[eta]pump,STD = -0.85 *
In(Q100[percnt])2 - 0.38 * In(NS) *
In(Q100[percnt]) - 11.48 * In(NS)2 +
17.80 * In(Q100[percnt]) + 179.80 * In(NS) - (C -
555.6)
3. On page 17646: The equation in section III.D.1.2.1 is corrected
by removing ``MotorH'' and adding in its place ``MotorHP''. The
corrected equation reads as follows:
[GRAPHIC] [TIFF OMITTED] TP24AP15.001
4. On page 17648: The equation in section V.D.1.2.1 is corrected by
removing ``MotorHPMotorH'' and adding in its place ``MotorHP''. The
corrected equation reads as follows:
[GRAPHIC] [TIFF OMITTED] TP24AP15.002
Issued in Washington, DC, on April 20, 2015.
Kathleen B. Hogan,
Deputy Assistant Secretary for Energy Efficiency, Energy Efficiency and
Renewable Energy.
[FR Doc. 2015-09566 Filed 4-23-15; 8:45 am]
BILLING CODE 6450-01-P
