Certain New Chemicals; Receipt and Status Information, 22512-22516 [2015-09204]
Download as PDF
<![CDATA[
asabaliauskas on DSK5VPTVN1PROD with NOTICES
22512
Federal Register / Vol. 80, No. 77 / Wednesday, April 22, 2015 / Notices
Protection Agency, Mail Code 28221T,
1200 Pennsylvania Ave. NW.,
Washington, DC 20460, and (2) OMB via
email to oira_submission@omb.eop.gov.
Address comments to OMB Desk Officer
for EPA.
EPA’s policy is that all comments
received will be included in the public
docket without change including any
personal information provided, unless
the comment includes profanity, threats,
information claimed to be Confidential
Business Information (CBI) or other
information whose disclosure is
restricted by statute.
FOR FURTHER INFORMATION CONTACT:
Patrick Yellin, Monitoring, Assistance,
and Media Programs Division, Office of
Compliance, Mail Code 2227A,
Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington,
DC 20460; telephone number: (202)
564–2970; fax number: (202) 564–0050;
email address: yellin.patrick@epa.gov.
SUPPLEMENTARY INFORMATION:
Supporting documents, which explain
in detail the information that the EPA
will be collecting, are available in the
public docket for this ICR. The docket
can be viewed online at
www.regulations.gov or in person at the
EPA Docket Center, EPA WJC West,
Room 3334, 1301 Constitution Ave.
NW., Washington, DC. The telephone
number for the Docket Center is 202–
566–1744. For additional information
about EPA’s public docket, visit https://
www.epa.gov/dockets.
Abstract: The National Emission
Standards for Hazardous Air Pollutants
(NESHAP) for Natural Gas Transmission
and Storage (40 CFR part 63, subpart
HHH) applies to existing facilities and
new facilities that are major sources of
hazardous air pollutants (HAP) and that
either transport or store natural gas prior
to entering the pipeline to a local
distribution company or to a final end
user (if there is no local distribution
company). New respondents include
those that commenced construction, or
reconstruction after the date of proposal
of the initial rule and of the 2012 rule
amendments. In general, all NESHAP
standards require initial notifications,
performance tests, and periodic reports.
These notifications, reports, and records
are essential in determining compliance,
and are required of all sources subject
to NESHAP standards.
Form Numbers: None.
Respondents/affected entities: Natural
gas transport and storage facilities.
Respondent’s obligation to respond:
Mandatory (40 CFR part 63, subpart
HHH).
Estimated number of respondents: 37
(total).
VerDate Sep<11>2014
18:00 Apr 21, 2015
Jkt 235001
Frequency of response: Initially,
occasionally, and semiannually.
Total estimated burden: 2,000 hours
(per year). Burden is defined at 5 CFR
1320.3(b).
Total estimated cost: $205,000 (per
year), which includes no annualized
capital or operation & maintenance
costs.
Changes in the Estimates: There is a
decrease of 391 hours in the total
estimated respondent burden compared
with the ICR currently approved by
OMB. This is due to a correction in
burden estimates and the consolidation
of 2060–0670 with this ICR, as well as
the rounding of estimates.
Courtney Kerwin,
Acting Director, Collection Strategies
Division.
[FR Doc. 2015–09357 Filed 4–21–15; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2015–0183; FRL–9926–36]
Certain New Chemicals; Receipt and
Status Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA) to
publish in the Federal Register a notice
of receipt of a premanufacture notice
(PMN); an application for a test
marketing exemption (TME), both
pending and/or expired; and a periodic
status report on any new chemicals
under EPA review and the receipt of
notices of commencement (NOC) to
manufacture those chemicals. This
document covers the period from March
1, 2015 to March 31, 2015.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before May 22,
2015.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2015–0183,
and the specific PMN number or TME
number for the chemical related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
SUMMARY:
PO 00000
Frm 00040
Fmt 4703
Sfmt 4703
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at
https://www.epa.gov/dockets/
contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For
technical information contact: Jim
Rahai, Information Management
Division (7407M), Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: Rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the PMNs addressed in this action.
B. What should I consider as I prepare
my comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
E:\FR\FM\22APN1.SGM
22APN1
Federal Register / Vol. 80, No. 77 / Wednesday, April 22, 2015 / Notices
https://www.epa.gov/dockets/
comments.html.
II. What action is the Agency taking?
This document provides receipt and
status reports, which cover the period
from March 1, 2015 to March 31, 2015,
and consists of the PMNs and TMEs
both pending and/or expired, and the
NOCs to manufacture a new chemical
that the Agency has received under
TSCA section 5 during this time period.
III. What is the Agency’s authority for
taking this action?
Section 5 of TSCA requires that EPA
periodical publish in the Federal
Register receipt and status reports,
which cover the following EPA
activities required by provisions of
TSCA section 5.
EPA classifies a chemical substance as
either an ‘‘existing’’ chemical or a
‘‘new’’ chemical. Any chemical
substance that is not on EPA’s TSCA
Inventory is classified as a ‘‘new
chemical,’’ while those that are on the
TSCA Inventory are classified as an
‘‘existing chemical.’’ For more
information about the TSCA Inventory
go to: https://www.epa.gov/opptintr/
newchems/pubs/inventory.htm. Anyone
who plans to manufacture or import a
new chemical substance for a nonexempt commercial purpose is required
by TSCA section 5 to provide EPA with
a PMN, before initiating the activity.
Section 5(h)(1) of TSCA authorizes EPA
to allow persons, upon application, to
manufacture (includes import) or
process a new chemical substance, or a
chemical substance subject to a
significant new use rule (SNUR) issued
under TSCA section 5(a), for ‘‘test
marketing’’ purposes, which is referred
to as a test marketing exemption, or
TME. For more information about the
requirements applicable to a new
chemical go to: https://www.epa.gov/
oppt/newchems.
22513
Under TSCA sections 5(d)(2) and
5(d)(3), EPA is required to publish in
the Federal Register a notice of receipt
of a PMN or an application for a TME
and to publish in the Federal Register
periodic status reports on the new
chemicals under review and the receipt
of NOCs to manufacture those
chemicals.
IV. Receipt and Status Reports
In Table I. of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: The EPA case
number assigned to the PMN, the date
the PMN was received by EPA, the
projected end date for EPA’s review of
the PMN, the submitting manufacturer/
importer, the potential uses identified
by the manufacturer/importer in the
PMN, and the chemical identity.
TABLE I—51 PMNS RECEIVED FROM 03/01/2015 TO 03/31/2015
Received date
Projected notice end date
P–15–
0292.
02/17/2015
P–15–
0322.
Manufacturer
importer
Use
05/18/2015
CBI ........................
03/01/2015
05/30/2015
CBI ........................
(S) Reactive polymer for use in
coatings.
(G) Adhesive ........
P–15–
0323.
03/02/2015
05/31/2015
Allnex USA Inc. ....
P–15–
0324.
P–15–
0325.
03/02/2015
05/31/2015
CBI ........................
03/02/2015
05/31/2015
Firmenich Incorporated.
P–15–
0326.
03/02/2015
05/31/2015
CBI ........................
P–15–
0327.
P–15–
0328.
P–15–
0329.
P–15–
0331.
03/03/2015
06/01/2015
CBI ........................
03/03/2015
06/01/2015
CBI ........................
03/03/2015
06/01/2015
CBI ........................
03/04/2015
06/02/2015
CBI ........................
P–15–
0330.
asabaliauskas on DSK5VPTVN1PROD with NOTICES
Case
No.
03/04/2015
06/02/2015
CBI ........................
P–15–
0332.
P–15–
0333.
P–15–
0336.
03/04/2015
06/02/2015
CBI ........................
03/04/2015
06/02/2015
CBI ........................
03/06/2015
06/04/2015
Nalco Champion,
An Ecolab Company (950119).
P–15–
0337.
03/09/2015
06/07/2015
CBI ........................
VerDate Sep<11>2014
18:00 Apr 21, 2015
Jkt 235001
PO 00000
Frm 00041
Chemical
(S) Main or cobinder in litho ink
formulation.
(G) Additive in oil ..
(G) Acrylic polymer
(G)
Poly[oxy(alkanediyl)],.alpha.,.alpha.’,.alpha.’’-1,2,3propanetriyltris[.omega.(2-hydroxy-3mercaptopropoxy)(G)
Alkanoic
acid,
polymer
with
substituted
carbomonocycle, substituted heteromonocycle, alkyl
ester, alkyl peroxide-initiated
(G) Magnesium alkaryl sulfonate
(G) As part of a
fragrance formula.
(G) Specialty gas,
Foam additive,
Transfer fluid.
(G) Additive ..........
(S) (4E)-Methyl-5-(4-methylphenyl)-4-pentanal
(G) Cement additive.
(S) Additive ...........
(G) Aluminum calcium oxide salt
(S) Ingredient in
cured coating for
led chips.
(S) Ingredient in
cured coating for
led chips.
(G) Site-limited intermediate.
(G) Site-limited intermediate.
(S) Conductive
surface coating
for proppant
used in hydraulic
fracturing.
(G) To be used as
an end cap on a
polyurethane
prepolymer.
(G) Diphenylcyclic siloxane
Fmt 4703
Sfmt 4703
(G) Hydrofluorocarbon
(G) Acryl based copolymer
(S) Urea, N,N′′-1,6-hexanediylbis[N′-[(1S)-1-phenylethyl]-
(G) Diphenylcyclic siloxane
(G) Linear siloxane
(G) Distillation bottoms
(G) Polyethylenaminepolyalkylamide
(G) Amino functional silane
E:\FR\FM\22APN1.SGM
22APN1
22514
Federal Register / Vol. 80, No. 77 / Wednesday, April 22, 2015 / Notices
TABLE I—51 PMNS RECEIVED FROM 03/01/2015 TO 03/31/2015—Continued
Received date
Projected notice end date
P–15–
0338.
P–15–
0339.
Manufacturer
importer
Use
06/07/2015
CBI ........................
03/09/2015
06/07/2015
CBI ........................
(S) Industrial lubricant.
(G) Paint additive
P–15–
0341.
03/11/2015
06/09/2015
H.B. Fuller Company.
P–15–
0342.
03/12/2015
06/10/2015
CBI ........................
P–15–
0344.
P–15–
0345.
P–15–
0346.
P–15–
0348.
03/13/2015
06/11/2015
CBI ........................
03/13/2015
06/11/2015
CBI ........................
03/13/2015
06/11/2015
CBI ........................
03/16/2015
06/14/2015
CBI ........................
P–15–
0349.
03/16/2015
06/14/2015
CBI ........................
P–15–
0352.
03/18/2015
06/16/2015
Carbon3D, Inc. .....
P–15–
0353.
P–15–
0354.
P–15–
0354.
P–15–
0355.
P–15–
0356.
03/19/2015
06/17/2015
CBI ........................
03/19/2015
06/17/2015
CBI ........................
03/19/2015
06/17/2015
CBI ........................
03/20/2015
06/18/2015
CBI ........................
03/20/2015
06/18/2015
CBI ........................
P–15–
0356.
03/20/2015
06/18/2015
CBI ........................
P–15–
0357.
03/20/2015
06/18/2015
CBI ........................
P–15–
0358.
03/22/2015
06/20/2015
CBI ........................
P–15–
0359.
asabaliauskas on DSK5VPTVN1PROD with NOTICES
Case
No.
03/09/2015
03/23/2015
06/21/2015
CBI ........................
P–15–
0361.
03/24/2015
06/22/2015
CBI ........................
P–15–
0362.
P–15–
0363.
P–15–
0364.
03/25/2015
06/23/2015
03/23/2015
03/25/2015
VerDate Sep<11>2014
Chemical
(S) Binder ingredient in grout
formulations.
(G) Adhesive for
electrical industry use.
(G) Lubricant additive.
(G) Additive ..........
(S) Decanedioic acid, 1,10-diisotridecyl ester
(G) Substituted carbomonocycle bis-, polymer with carbon dioxide, haloalkyl heteromonocycle, disubstituted
alkanes, and [(alkylidene)bis(substituted alkylene
carbomonocycle)]bis[heteromonocycle]
(G) Propenoic acid alkyl ester(s), telomer with alkanethiol,
2-methyl-2-propenoic acid and 2-hydroxyethyl 2propenoate
(G) Carboxylated Styrene butadiene Polymer
(G) 2,5-Furandione, polymer with 1-dodecene,alkyl esters
(G) Acryl based copolymer
(G) Adhesive component.
(G) Physicochemical property modifier.
(G) Use in Ultraviolet/Electron
beam (UV/EB)
adhesives and
coatings.
(G) Oligomeric
component of
3D printer resin
formulations.
(G) Lubricant additive.
(G) Lubricant ........
(G) Polyurethane adduct
(G) Perfluoropolyether-block-Polytetrafluoroethylene
CBI ........................
(G) Anti-stick additive.
(S) Industrial Coating crosslinker.
(G) Additive in
polymer formulation for electronics.
(G) Additive in
polymer formulation for electronics.
(G) Raw material
for thermal
paper manufacture.
(S) Acrylic resin
used in the manufacture of inks
and coatings.
(S) A hardener for
epoxy systems
for use in architectural coatings.
(G) Additive, open,
non-dispersive
use.
(G) Printing ink .....
06/21/2015
CBI ........................
(G) Monomer ........
(G) Aliphatic acrylate
06/23/2015
DIC International
(USA) LLC.
(G) Colorant for industrial coatings
and plastics.
(G)
Copper,
[29H,31H-phthalocyaninato(2-).kappa.n29,.kappa.n30,.kappa.n31,.kappa.n32]-, (sp-41)- and metal, [substituted 29h,31h-phthalocyanine.kappa.n29,.kappa.n30,.kappa.n31,lkappa.n32]-
18:00 Apr 21, 2015
Jkt 235001
PO 00000
Frm 00042
Fmt 4703
Sfmt 4703
(G) Salt of a methacrylic acid derivative—acrylic acid copolymer
(G) Carbonic acid, diethyl ester, polymer with 1,6hexanediol,
5-isocyanato-1-(isocyanatomethyl)-1,3,3trimethylcyclohexane 2-hydroxyethyl acrylate-blocked
(G) Urethane oligomer
(G) Chlorinated complex ester
(G) Perfluoropolyether-block-Polytetrafluoroethylene
(S) Hexane, 1,6-diisocyanato-, homopolymer, di-Et malonate-blocked
(S)
Oxirane,
2,2′-[[1-[4-[1-methyl-1-[4-(2oxiranylmethoxy)phenyl]ethyl]phenyl]ethylidene]bis(4,1phenyleneoxymethylene)]bis(S)
2-Propanol,
1,3-bis[4-[1-[4-[1-methyl-1-[4-(2oxiranylmethoxy)phenyl]ethyl]phenyl]-1-[4-(2oxiranylmethoxy)phenyl]ethyl]phenoxy](G) Benzenesulfonamide, phenyl substituted carbonyl
(G) Hexamethylene diisocyanate with caprolactone acrylate
(S) Formaldehyde, polymer with N-(3-aminopropyl)-1,3propanediamine
(G) Alkyl and aralkyl and trimethoxysilylethylene modified
polysiloxane
(G) Polyamid resin
E:\FR\FM\22APN1.SGM
22APN1
22515
Federal Register / Vol. 80, No. 77 / Wednesday, April 22, 2015 / Notices
TABLE I—51 PMNS RECEIVED FROM 03/01/2015 TO 03/31/2015—Continued
Case
No.
Received date
Projected notice end date
Manufacturer
importer
Use
Chemical
P–15–
0365.
03/25/2015
06/23/2015
CBI ........................
(G) Component of
pesticide formulation.
03/26/2015
06/24/2015
CBI ........................
(G) Automotive
coatings.
P–15–
0367.
P–15–
0368.
03/26/2015
06/24/2015
CBI ........................
03/26/2015
06/24/2015
Industrial Speciality
Chemicals.
P–15–
0369.
03/26/2015
06/24/2015
Clean Chemistry ...
P–15–
0369.
03/26/2015
06/24/2015
Clean Chemistry ...
P–15–
0370.
03/27/2015
06/25/2015
CBI ........................
(S) Curing agent
for epoxy resin.
(G) This material
will be used in
conjunction with
current chemistries for wastewater treatment..
(S) Water clarifying
agent, odor control agent,
bleaching agent,
and general oxidant for water
treatment.
(G) Destructive
use in fuel production.
(G) Printing additive.
(G) Alkyl alkenoic acid polymers with alkyl acrylate, alkyl
methacrylate, polyether methacrylate alkyl ethers and
substituted heteromonocycle, compounds with substituted alkyl alkanol
(G)
Alkylmethacrylate,
polymer
with
cycloalkylmethacrylate,
alkenylbenzene,
branched
alkylmethacrylate,
hydroxyalkylmethacrylate,
alkanediolmonomethacrylate, and alkenoic acid, t-butyl
alkaneperoxoic acid ester and alkyl peroxide-initiated
(G)
Cycloalkanediamine,
polymer
with
2,2’[methylenebis(phenyleneoxymethylene)]bis[oxirane]
(G)
Starch
(trialkylammonio)
ether,
halide;
(haloalkyl)trialkylammonium
halide;
alkane
bis(trialkylammonium) halide
P–15–
0366.
P–15–
0372.
P–15–
0373.
03/27/2015
06/25/2015
CBI ........................
(G) Surfactant .......
03/31/2015
06/29/2015
Allnex USA Inc. ....
P–15–
0374.
03/31/2015
06/29/2015
CBI ........................
P–15–
0375.
P–15–
0376.
03/31/2015
06/29/2015
CBI ........................
03/31/2015
06/29/2015
CBI ........................
(S) Coatings for
automobile
headlights,
polycarbonate
glazing, and
films.
(G) Polymer for
optical application.
(G) Lubricant additive.
(G) Oil additive .....
In Table II. of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the TMEs received by EPA
(G) Organic peroxide
(G) Organic peroxide
(G) Alcohols, polymers with dicarboxylic acid, alcohols,
alkenedioic acid, dicarboxylic acids, alkanoic acid
esters
(G) 1,3-Propanediamine, N1-alky,-, carboxymethyl derivs
(G)
Substituted
carbopolycycle,
polymer
with
disubstituted alkane substituted alkyl methacrylateblocked
(G) Methacrylic copolymer with cyclic structure unit
(G) 2,5-Furandione, polymer with 1-dodecene,alkyl esters
(G) Alkenes, reaction products with alkyl carbonate, phenol and sulfur, calcium salts
during this period: The EPA case
number assigned to the TME, the date
the TME was received by EPA, the
projected end date for EPA’s review of
the TME, the submitting manufacturer/
importer, the potential uses identified
by the manufacturer/importer in the
TME, and the chemical identity.
TABLE II—1 TME RECEIVED FROM 03/01/2015 TO 03/31/215
Case No.
asabaliauskas on DSK5VPTVN1PROD with NOTICES
T–15–0008 ....
Received date
Projected notice
end date
03/20/2015
05/04/2015
In Table III. of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
VerDate Sep<11>2014
18:00 Apr 21, 2015
Jkt 235001
Manufacter importer
Use
CBI ............................
(G) Intermediate ....................
CBI) on the NOCs received by EPA
during this period: The EPA case
number assigned to the NOC, the date
PO 00000
Frm 00043
Fmt 4703
Sfmt 4703
Chemical
(G) Alkyl substituted cresol
the NOC was received by EPA, the
projected end date for EPA’s review of
the NOC, and chemical identity.
E:\FR\FM\22APN1.SGM
22APN1
22516
Federal Register / Vol. 80, No. 77 / Wednesday, April 22, 2015 / Notices
TABLE III.—25 NOCS RECEIVED FROM 03/01/2015 TO 03/31/2015
Case No.
Commencement
notice end date
Received date
Chemical
P–14–0792 .................
03/03/2015
02/05/2015
P–14–0718 .................
P–13–0326 .................
03/03/2015
03/13/2015
02/09/2015
02/17/2015
P–13–0332 .................
03/13/2015
02/17/2015
P–13–0522 .................
03/13/2015
02/17/2015
P–13–0831 .................
03/13/2015
02/17/2015
P–14–0686 .................
03/13/2015
02/17/2015
P–14–0685 .................
03/16/2015
02/20/2015
P–15–0102 .................
P–15–0087 .................
P–12–0318 .................
03/03/2015
03/25/2015
03/03/2015
02/23/2015
02/25/2015
02/28/2015
P–13–0305 .................
P–09–0199 .................
P–14–0701 .................
03/10/2015
03/18/2015
03/06/2015
03/03/2015
03/03/2015
03/05/2015
P–15–0075
P–15–0122
P–15–0061
P–14–0452
P–13–0653
P–15–0063
P–14–0559
P–15–0137
.................
.................
.................
.................
.................
.................
.................
.................
03/09/2015
03/17/2015
03/20/2015
03/19/2015
03/17/2015
03/20/2015
03/25/2015
03/27/2015
03/05/2015
03/10/2015
03/10/2015
03/12/2015
03/16/2015
03/16/2015
03/20/2015
03/26/2015
P–14–0007 .................
P–06–0620 .................
03/06/2015
03/06/2015
04/02/2014
11/08/2006
If you are interested in information
that is not included in these tables, you
may contact EPA as described in Unit III
to access additional non-CBI
information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: April 15, 2015.
Chandler Sirmons,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2015–09204 Filed 4–21–15; 8:45 am]
asabaliauskas on DSK5VPTVN1PROD with NOTICES
BILLING CODE 6560–50–P
(G) 1,2,3-Propanetriol, homopolymer, alkanoate and glycerides, alkanoate,
mono-, di-and tri(G) Polyol
(G) Castor oil, dehydrated, polymer with alkyl diamine, dihydroxyalkyl carboxylic acid, aromatic azinetriamine, methylenebis[isocyanatocycloalkane]-,
compounds with trialkylamine
(G) Propenoic acid ester, polymer with N-(dimethyloxoalkyl)alkylamide, alkyl
propenoate and alkyl alkyl propenoate
(G) Alkanedioic acid, polymer with aminoalkanol, alkanediol, alkyl(hydroxyalkyl)alkanediol, 1,x-alkanediol, hydroxy-(hydroxyalkyl)alkanoic
acid, methylenebis[isocyanatocycloalkane] and alkene carboxylic acid, compound with alkylmorpholine
(G) Dicarboxylic acid, polymer with N-(dialkyl-oxoalkyl)-alkennamide,
alkanediol, alkanediol, hydroxy-(hydroxyalkyl)-alkyl carboxylic acid,
isocyanato-(isocyanatoalkyl)-trimethylcycloalkane,
methylenebis[isocyanatocycloalkane] and alkyl alkyl-alkenoate, compounds
with dialkylalkylamine
(G) Alkenoic acid, polymer with alkyl 2-alkenoate, N-(1,1-dialkyl-3-oxoalkyl)-2alkenamide and alkyl 2-alkyl-2-alkenoate
(G) Alkenoic acid, polymer with alkyl 2-alkyl-2-alkenoate, alkyl 2-alkenoate, N(1,1-dialkyl-3-oxoalkyl)-2-alkenamide and alkyl 2-alkyl-2-alkenenoate
(G) Alkali titanosilicate salt
(G) Substituted heteromonocyclic carboxylic acid salt
(G)
Cycloalkylmethamine,
amino
alkyl,
polymer
with
hydroxypoly(oxyalkanediyl), hydroxypoly[oxy(alkyl-1,2-alkanediyl)] and alkyl
bisisocyanatocycloalkane, alc.-blocked
(G) Fluorinated ester
(S) Carbon nanotube, multi-wall*
(G) Functionalized fatty acid, polymer with maleic anhydride, me methacrylate, 4-oxopentanoic acid and styrene, compound with triethylamine.
(G) Siliicone acrylic/methacrylic polymer
(G) Bicycloamine
(G) Imidazolium,polymer with cyclic anhydride and alkenoic acid, alkali salt
(G) Substituted naphthalene polymer glycidyl ether
(G) Fatty acid polymer with aliphatic alcohol and aromatic diacid
(G) Perfluoropolyether modified silane
(S) 1,6,10-Dodecatriene, 7,11-dimethyl-3-methylene-, (6e)-, hydrogenated*
(G) Fatty acids, polymers with substituted carbomonocycle, substituted
heteromonocycle, and alkylamine, substituted alkanoic acid (salts)
(G) Fatty acids, esters with polyol
(S) Fatty acids, C8–10, tetraesters with bis[2,2-bis(hydroxymethyl)butyl]
adipate*
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OECA–2014–0099; FRL–9925–
66–OEI]
Information Collection Request
Submitted to OMB for Review and
Approval; Comment Request; NESHAP
for Ferroalloys Production Area
Sources (Renewal)
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
The Environmental Protection
Agency (EPA) has submitted an
information collection request (ICR),
‘‘NESHAP for Ferroalloys Production
Area Sources (40 CFR part 63, subpart
YYYYYY) (Renewal)’’ (EPA ICR No.
2303.04, OMB Control No. 2060–0625)
to the Office of Management and Budget
(OMB) for review and approval in
SUMMARY:
VerDate Sep<11>2014
18:00 Apr 21, 2015
Jkt 235001
PO 00000
Frm 00044
Fmt 4703
Sfmt 4703
accordance with the Paperwork
Reduction Act (44 U.S.C. 3501 et seq.).
This is a proposed extension of the ICR,
which is currently approved through
April 30, 2015. Public comments were
previously requested via the Federal
Register (79 FR 30117) on May 27, 2014
during a 60-day comment period. This
notice allows for an additional 30 days
for public comments. A fuller
description of the ICR is given below,
including its estimated burden and cost
to the public. An Agency may not
conduct or sponsor and a person is not
required to respond to a collection of
information unless it displays a
currently valid OMB control number.
DATES: Additional comments may be
submitted on or before May 22, 2015.
ADDRESSES: Submit your comments,
referencing Docket ID Number EPA–
HQ–OECA–2014–0099, to (1) EPA
online using www.regulations.gov (our
E:\FR\FM\22APN1.SGM
22APN1
]]>Agencies
[Federal Register Volume 80, Number 77 (Wednesday, April 22, 2015)]
[Notices]
[Pages 22512-22516]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-09204]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2015-0183; FRL-9926-36]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of notices
of commencement (NOC) to manufacture those chemicals. This document
covers the period from March 1, 2015 to March 31, 2015.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before May 22, 2015.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2015-0183, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, Information Management Division (7407M), Office of Pollution
Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number:
(202) 564-8593; email address: Rahai.jim@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the PMNs addressed in this action.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at
[[Page 22513]]
https://www.epa.gov/dockets/comments.html.
II. What action is the Agency taking?
This document provides receipt and status reports, which cover the
period from March 1, 2015 to March 31, 2015, and consists of the PMNs
and TMEs both pending and/or expired, and the NOCs to manufacture a new
chemical that the Agency has received under TSCA section 5 during this
time period.
III. What is the Agency's authority for taking this action?
Section 5 of TSCA requires that EPA periodical publish in the
Federal Register receipt and status reports, which cover the following
EPA activities required by provisions of TSCA section 5.
EPA classifies a chemical substance as either an ``existing''
chemical or a ``new'' chemical. Any chemical substance that is not on
EPA's TSCA Inventory is classified as a ``new chemical,'' while those
that are on the TSCA Inventory are classified as an ``existing
chemical.'' For more information about the TSCA Inventory go to: https://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to
manufacture or import a new chemical substance for a non-exempt
commercial purpose is required by TSCA section 5 to provide EPA with a
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes
EPA to allow persons, upon application, to manufacture (includes
import) or process a new chemical substance, or a chemical substance
subject to a significant new use rule (SNUR) issued under TSCA section
5(a), for ``test marketing'' purposes, which is referred to as a test
marketing exemption, or TME. For more information about the
requirements applicable to a new chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic status
reports on the new chemicals under review and the receipt of NOCs to
manufacture those chemicals.
IV. Receipt and Status Reports
In Table I. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: The EPA case number assigned to the
PMN, the date the PMN was received by EPA, the projected end date for
EPA's review of the PMN, the submitting manufacturer/importer, the
potential uses identified by the manufacturer/importer in the PMN, and
the chemical identity.
Table I--51 PMNs Received From 03/01/2015 to 03/31/2015
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected
Case No. Received date notice end Manufacturer importer Use Chemical
date
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-15-0292.......................... 02/17/2015 05/18/2015 CBI................... (S) Reactive polymer (G) Acrylic polymer
for use in coatings.
P-15-0322.......................... 03/01/2015 05/30/2015 CBI................... (G) Adhesive......... (G)
Poly[oxy(alkanediyl)],.alpha.,.alph
a.',.alpha.''-1,2,3-
propanetriyltris[.omega.- (2-
hydroxy-3-mercaptopropoxy)-
P-15-0323.......................... 03/02/2015 05/31/2015 Allnex USA Inc........ (S) Main or cobinder (G) Alkanoic acid, polymer with
in litho ink substituted carbomonocycle,
formulation. substituted heteromonocycle, alkyl
ester, alkyl peroxide-initiated
P-15-0324.......................... 03/02/2015 05/31/2015 CBI................... (G) Additive in oil.. (G) Magnesium alkaryl sulfonate
P-15-0325.......................... 03/02/2015 05/31/2015 Firmenich Incorporated (G) As part of a (S) (4E)-Methyl-5-(4-methylphenyl)-4-
fragrance formula. pentanal
P-15-0326.......................... 03/02/2015 05/31/2015 CBI................... (G) Specialty gas, (G) Hydrofluorocarbon
Foam additive,
Transfer fluid.
P-15-0327.......................... 03/03/2015 06/01/2015 CBI................... (G) Additive......... (G) Acryl based copolymer
P-15-0328.......................... 03/03/2015 06/01/2015 CBI................... (G) Cement additive.. (G) Aluminum calcium oxide salt
P-15-0329.......................... 03/03/2015 06/01/2015 CBI................... (S) Additive......... (S) Urea, N,N''-1,6-hexanediylbis[N'-
[(1S)-1-phenylethyl]-
P-15-0331.......................... 03/04/2015 06/02/2015 CBI................... (S) Ingredient in (G) Diphenylcyclic siloxane
cured coating for
led chips.
P-15-0330.......................... 03/04/2015 06/02/2015 CBI................... (S) Ingredient in (G) Diphenylcyclic siloxane
cured coating for
led chips.
P-15-0332.......................... 03/04/2015 06/02/2015 CBI................... (G) Site-limited (G) Linear siloxane
intermediate.
P-15-0333.......................... 03/04/2015 06/02/2015 CBI................... (G) Site-limited (G) Distillation bottoms
intermediate.
P-15-0336.......................... 03/06/2015 06/04/2015 Nalco Champion, An (S) Conductive (G) Polyethylenaminepolyalkylamide
Ecolab Company surface coating for
(950119). proppant used in
hydraulic fracturing.
P-15-0337.......................... 03/09/2015 06/07/2015 CBI................... (G) To be used as an (G) Amino functional silane
end cap on a
polyurethane
prepolymer.
[[Page 22514]]
P-15-0338.......................... 03/09/2015 06/07/2015 CBI................... (S) Industrial (S) Decanedioic acid, 1,10-
lubricant. diisotridecyl ester
P-15-0339.......................... 03/09/2015 06/07/2015 CBI................... (G) Paint additive... (G) Substituted carbomonocycle bis-,
polymer with carbon dioxide,
haloalkyl heteromonocycle,
disubstituted alkanes, and
[(alkylidene)bis(substituted
alkylene
carbomonocycle)]bis[heteromonocycle
]
P-15-0341.......................... 03/11/2015 06/09/2015 H.B. Fuller Company... (S) Binder ingredient (G) Propenoic acid alkyl ester(s),
in grout telomer with alkanethiol, 2-methyl-
formulations. 2-propenoic acid and 2-hydroxyethyl
2-propenoate
P-15-0342.......................... 03/12/2015 06/10/2015 CBI................... (G) Adhesive for (G) Carboxylated Styrene butadiene
electrical industry Polymer
use.
P-15-0344.......................... 03/13/2015 06/11/2015 CBI................... (G) Lubricant (G) 2,5-Furandione, polymer with 1-
additive. dodecene,alkyl esters
P-15-0345.......................... 03/13/2015 06/11/2015 CBI................... (G) Additive......... (G) Acryl based copolymer
P-15-0346.......................... 03/13/2015 06/11/2015 CBI................... (G) Adhesive (G) Polyurethane adduct
component.
P-15-0348.......................... 03/16/2015 06/14/2015 CBI................... (G) Physicochemical (G) Salt of a methacrylic acid
property modifier. derivative--acrylic acid copolymer
P-15-0349.......................... 03/16/2015 06/14/2015 CBI................... (G) Use in (G) Carbonic acid, diethyl ester,
Ultraviolet/Electron polymer with 1,6-hexanediol, 5-
beam (UV/EB) isocyanato-1-(isocyanatomethyl)-
adhesives and 1,3,3-trimethylcyclohexane 2-
coatings. hydroxyethyl acrylate-blocked
P-15-0352.......................... 03/18/2015 06/16/2015 Carbon3D, Inc......... (G) Oligomeric (G) Urethane oligomer
component of 3D
printer resin
formulations.
P-15-0353.......................... 03/19/2015 06/17/2015 CBI................... (G) Lubricant (G) Chlorinated complex ester
additive.
P-15-0354.......................... 03/19/2015 06/17/2015 CBI................... (G) Lubricant........ (G) Perfluoropolyether-block-
Polytetrafluoroethylene
P-15-0354.......................... 03/19/2015 06/17/2015 CBI................... (G) Anti-stick (G) Perfluoropolyether-block-
additive. Polytetrafluoroethylene
P-15-0355.......................... 03/20/2015 06/18/2015 CBI................... (S) Industrial (S) Hexane, 1,6-diisocyanato-,
Coating crosslinker. homopolymer, di-Et malonate-blocked
P-15-0356.......................... 03/20/2015 06/18/2015 CBI................... (G) Additive in (S) Oxirane, 2,2'-[[1-[4-[1-methyl-1-
polymer formulation [4-(2-
for electronics. oxiranylmethoxy)phenyl]ethyl]phenyl
]ethylidene]bis(4,1-
phenyleneoxymethylene)]bis-
P-15-0356.......................... 03/20/2015 06/18/2015 CBI................... (G) Additive in (S) 2-Propanol, 1,3-bis[4-[1-[4-[1-
polymer formulation methyl-1-[4-(2-
for electronics. oxiranylmethoxy)phenyl]ethyl]phenyl
]-1-[4-(2-
oxiranylmethoxy)phenyl]ethyl]phenox
y]-
P-15-0357.......................... 03/20/2015 06/18/2015 CBI................... (G) Raw material for (G) Benzenesulfonamide, phenyl
thermal paper substituted carbonyl
manufacture.
P-15-0358.......................... 03/22/2015 06/20/2015 CBI................... (S) Acrylic resin (G) Hexamethylene diisocyanate with
used in the caprolactone acrylate
manufacture of inks
and coatings.
P-15-0359.......................... 03/23/2015 06/21/2015 CBI................... (S) A hardener for (S) Formaldehyde, polymer with N-(3-
epoxy systems for aminopropyl)-1,3-propanediamine
use in architectural
coatings.
P-15-0361.......................... 03/24/2015 06/22/2015 CBI................... (G) Additive, open, (G) Alkyl and aralkyl and
non-dispersive use. trimethoxysilylethylene modified
polysiloxane
P-15-0362.......................... 03/25/2015 06/23/2015 CBI................... (G) Printing ink..... (G) Polyamid resin
P-15-0363.......................... 03/23/2015 06/21/2015 CBI................... (G) Monomer.......... (G) Aliphatic acrylate
P-15-0364.......................... 03/25/2015 06/23/2015 DIC International (G) Colorant for (G) Copper, [29H,31H-
(USA) LLC. industrial coatings phthalocyaninato(2-)-
and plastics. .kappa.n29,.kappa.n30,.kappa.n31,.k
appa.n32]-, (sp-4-1)- and metal,
[substituted 29h,31h-phthalocyanine-
.kappa.n29,.kappa.n30,.kappa.n31,lk
appa.n32]-
[[Page 22515]]
P-15-0365.......................... 03/25/2015 06/23/2015 CBI................... (G) Component of (G) Alkyl alkenoic acid polymers
pesticide with alkyl acrylate, alkyl
formulation. methacrylate, polyether
methacrylate alkyl ethers and
substituted heteromonocycle,
compounds with substituted alkyl
alkanol
P-15-0366.......................... 03/26/2015 06/24/2015 CBI................... (G) Automotive (G) Alkylmethacrylate, polymer with
coatings. cycloalkylmethacrylate,
alkenylbenzene, branched
alkylmethacrylate,
hydroxyalkylmethacrylate,
alkanediolmonomethacrylate, and
alkenoic acid, t-butyl
alkaneperoxoic acid ester and alkyl
peroxide-initiated
P-15-0367.......................... 03/26/2015 06/24/2015 CBI................... (S) Curing agent for (G) Cycloalkanediamine, polymer with
epoxy resin. 2,2'-
[methylenebis(phenyleneoxymethylene
)]bis[oxirane]
P-15-0368.......................... 03/26/2015 06/24/2015 Industrial Speciality (G) This material (G) Starch (trialkylammonio) ether,
Chemicals. will be used in halide; (haloalkyl)trialkylammonium
conjunction with halide; alkane
current chemistries bis(trialkylammonium) halide
for wastewater
treatment..
P-15-0369.......................... 03/26/2015 06/24/2015 Clean Chemistry....... (S) Water clarifying (G) Organic peroxide
agent, odor control
agent, bleaching
agent, and general
oxidant for water
treatment.
P-15-0369.......................... 03/26/2015 06/24/2015 Clean Chemistry....... (G) Destructive use (G) Organic peroxide
in fuel production.
P-15-0370.......................... 03/27/2015 06/25/2015 CBI................... (G) Printing additive (G) Alcohols, polymers with
dicarboxylic acid, alcohols,
alkenedioic acid, dicarboxylic
acids, alkanoic acid esters
P-15-0372.......................... 03/27/2015 06/25/2015 CBI................... (G) Surfactant....... (G) 1,3-Propanediamine, N1-alky,-,
carboxymethyl derivs
P-15-0373.......................... 03/31/2015 06/29/2015 Allnex USA Inc........ (S) Coatings for (G) Substituted carbopolycycle,
automobile polymer with disubstituted alkane
headlights, substituted alkyl methacrylate-
polycarbonate blocked
glazing, and films.
P-15-0374.......................... 03/31/2015 06/29/2015 CBI................... (G) Polymer for (G) Methacrylic copolymer with
optical application. cyclic structure unit
P-15-0375.......................... 03/31/2015 06/29/2015 CBI................... (G) Lubricant (G) 2,5-Furandione, polymer with 1-
additive. dodecene,alkyl esters
P-15-0376.......................... 03/31/2015 06/29/2015 CBI................... (G) Oil additive..... (G) Alkenes, reaction products with
alkyl carbonate, phenol and sulfur,
calcium salts
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received by EPA during this period: The EPA case number assigned to the
TME, the date the TME was received by EPA, the projected end date for
EPA's review of the TME, the submitting manufacturer/importer, the
potential uses identified by the manufacturer/importer in the TME, and
the chemical identity.
Table II--1 TME Received From 03/01/2015 to 03/31/215
----------------------------------------------------------------------------------------------------------------
Projected notice Manufacter
Case No. Received date end date importer Use Chemical
----------------------------------------------------------------------------------------------------------------
T-15-0008......... 03/20/2015 05/04/2015 CBI.............. (G) Intermediate. (G) Alkyl
substituted
cresol
----------------------------------------------------------------------------------------------------------------
In Table III. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
received by EPA during this period: The EPA case number assigned to the
NOC, the date the NOC was received by EPA, the projected end date for
EPA's review of the NOC, and chemical identity.
[[Page 22516]]
Table III.--25 NOCs Received From 03/01/2015 to 03/31/2015
----------------------------------------------------------------------------------------------------------------
Commencement
Case No. Received date notice end date Chemical
----------------------------------------------------------------------------------------------------------------
P-14-0792.............................. 03/03/2015 02/05/2015 (G) 1,2,3-Propanetriol,
homopolymer, alkanoate and
glycerides, alkanoate, mono-, di-
and tri-
P-14-0718.............................. 03/03/2015 02/09/2015 (G) Polyol
P-13-0326.............................. 03/13/2015 02/17/2015 (G) Castor oil, dehydrated,
polymer with alkyl diamine,
dihydroxyalkyl carboxylic acid,
aromatic azinetriamine,
methylenebis[isocyanatocycloalka
ne]-, compounds with
trialkylamine
P-13-0332.............................. 03/13/2015 02/17/2015 (G) Propenoic acid ester, polymer
with N-
(dimethyloxoalkyl)alkylamide,
alkyl propenoate and alkyl alkyl
propenoate
P-13-0522.............................. 03/13/2015 02/17/2015 (G) Alkanedioic acid, polymer
with aminoalkanol, alkanediol,
alkyl-(hydroxyalkyl)alkanediol,
1,x-alkanediol, hydroxy-
(hydroxyalkyl)alkanoic acid,
methylenebis[isocyanatocycloalka
ne] and alkene carboxylic acid,
compound with alkylmorpholine
P-13-0831.............................. 03/13/2015 02/17/2015 (G) Dicarboxylic acid, polymer
with N-(dialkyl-oxoalkyl)-
alkennamide, alkanediol,
alkanediol, hydroxy-
(hydroxyalkyl)-alkyl carboxylic
acid, isocyanato-
(isocyanatoalkyl)-
trimethylcycloalkane,
methylenebis[isocyanatocycloalka
ne] and alkyl alkyl-alkenoate,
compounds with dialkylalkylamine
P-14-0686.............................. 03/13/2015 02/17/2015 (G) Alkenoic acid, polymer with
alkyl 2-alkenoate, N-(1,1-
dialkyl-3-oxoalkyl)-2-alkenamide
and alkyl 2-alkyl-2-alkenoate
P-14-0685.............................. 03/16/2015 02/20/2015 (G) Alkenoic acid, polymer with
alkyl 2-alkyl-2-alkenoate, alkyl
2-alkenoate, N-(1,1-dialkyl-3-
oxoalkyl)-2-alkenamide and alkyl
2-alkyl-2-alkenenoate
P-15-0102.............................. 03/03/2015 02/23/2015 (G) Alkali titanosilicate salt
P-15-0087.............................. 03/25/2015 02/25/2015 (G) Substituted heteromonocyclic
carboxylic acid salt
P-12-0318.............................. 03/03/2015 02/28/2015 (G) Cycloalkylmethamine, amino
alkyl, polymer with
hydroxypoly(oxyalkanediyl),
hydroxypoly[oxy(alkyl-1,2-
alkanediyl)] and alkyl
bisisocyanatocycloalkane, alc.-
blocked
P-13-0305.............................. 03/10/2015 03/03/2015 (G) Fluorinated ester
P-09-0199.............................. 03/18/2015 03/03/2015 (S) Carbon nanotube, multi-wall*
P-14-0701.............................. 03/06/2015 03/05/2015 (G) Functionalized fatty acid,
polymer with maleic anhydride,
me methacrylate, 4-oxopentanoic
acid and styrene, compound with
triethylamine.
P-15-0075.............................. 03/09/2015 03/05/2015 (G) Siliicone acrylic/methacrylic
polymer
P-15-0122.............................. 03/17/2015 03/10/2015 (G) Bicycloamine
P-15-0061.............................. 03/20/2015 03/10/2015 (G) Imidazolium,polymer with
cyclic anhydride and alkenoic
acid, alkali salt
P-14-0452.............................. 03/19/2015 03/12/2015 (G) Substituted naphthalene
polymer glycidyl ether
P-13-0653.............................. 03/17/2015 03/16/2015 (G) Fatty acid polymer with
aliphatic alcohol and aromatic
diacid
P-15-0063.............................. 03/20/2015 03/16/2015 (G) Perfluoropolyether modified
silane
P-14-0559.............................. 03/25/2015 03/20/2015 (S) 1,6,10-Dodecatriene, 7,11-
dimethyl-3-methylene-, (6e)-,
hydrogenated*
P-15-0137.............................. 03/27/2015 03/26/2015 (G) Fatty acids, polymers with
substituted carbomonocycle,
substituted heteromonocycle, and
alkylamine, substituted alkanoic
acid (salts)
P-14-0007.............................. 03/06/2015 04/02/2014 (G) Fatty acids, esters with
polyol
P-06-0620.............................. 03/06/2015 11/08/2006 (S) Fatty acids, C8 10,
tetraesters with bis[2,2-
bis(hydroxymethyl)butyl]
adipate*
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA as described in Unit III to access
additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: April 15, 2015.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2015-09204 Filed 4-21-15; 8:45 am]
BILLING CODE 6560-50-P
