Accreditation and Approval of Intertek USA, Inc., as a Commercial Gauger and Laboratory, 19676-19677 [2015-08188]
Download as PDF
<![CDATA[
19676
Federal Register / Vol. 80, No. 70 / Monday, April 13, 2015 / Notices
(PBHCI) Program. Specifically,
SAMHSA is requesting approval to only
collect information on grantee quarterly
reports.
The purpose of the PBHCI grant
program is to improve the overall
wellness and physical health status of
people with serious mental illnesses
(SMI), including individuals with cooccurring substance use disorders, by
supporting communities to coordinate
and integrate primary care services into
publicly-funded community mental
health and other community-based
behavioral health settings. The
program’s goal is to improve the
physical health status of adults with
serious mental illnesses (and those with
co-occurring substance use disorders)
who have or are at risk for co-occurring
primary care conditions and chronic
diseases. The program’s objective is to
support the triple aim of improving the
health of those with SMI; enhancing the
client’s experience of care (including
quality, access, and reliability); and
reducing/controlling the per capita cost
of care.
New questions added to the quarterly
report will include information on the
selected evidence based practices (EBPs)
for nutrition and tobacco cessation
(including the number of participants
and their outcomes), identifying the
selected blood pressure treatment
protocol (one of four recommended by
the Centers for Disease Control and
Prevention), and updating the chart on
the identified sub-population(s) on
physical health indicators in the
disparities impact statement section of
the quarterly report.
This information collection is needed
to provide SAMHSA with sufficient
information to monitor grantee
performance and to assess whether
integrated primary care services
produce improvements in the physical
health of the SMI population receiving
services from community-based
behavioral health agencies.
Collection of the information
included in this request is authorized by
Section 505 of the Public Health Service
Act (42 U.S.C. 290aa–4)—Data
Collection. Authorization for the PBHCI
program is provided under Section 5604
of H.R. 3590, the Affordable Care Act
(ACA), which authorizes SAMHSA to
provide awards for the co-location of
primary and specialty care in
community-based mental health
settings.
The table below reflects the
annualized hourly burden.
Instrument
Number of
respondents
Responses
per
respondent
Total
responses
Hours per
response per
respondent
Total hour
burden
Grantee Quarterly Report ....................................................
172
4
688
2
1376
Send comments to Summer King,
SAMHSA Reports Clearance Officer,
Room 2–1057, One Choke Cherry Road,
Rockville, MD 20857 OR email her a
copy at summer.king@samhsa.hhs.gov.
Written comments should be received
by June 12, 2015.
Summer King,
Statistician.
[FR Doc. 2015–08358 Filed 4–10–15; 8:45 am]
BILLING CODE 4162–20–P
DEPARTMENT OF HOMELAND
SECURITY
U.S. Customs and Border Protection
Accreditation and Approval of Intertek
USA, Inc., as a Commercial Gauger
and Laboratory
U.S. Customs and Border
Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and
approval of Intertek USA, Inc., as a
commercial gauger and laboratory.
mstockstill on DSK4VPTVN1PROD with NOTICES
AGENCY:
CBPL No.
27–08
27–48
27–58
27–50
27–07
............................
............................
............................
............................
............................
VerDate Sep<11>2014
Notice is hereby given,
pursuant to CBP regulations, that
Intertek USA, Inc., has been approved to
gauge petroleum and certain petroleum
products and accredited to test
petroleum and certain petroleum
products for customs purposes for the
next three years as of September 10,
2014.
DATES: Effective Dates: The
accreditation and approval of Intertek
USA, Inc., as commercial gauger and
laboratory became effective on
September 10, 2014. The next triennial
inspection date will be scheduled for
September 2017.
FOR FURTHER INFORMATION CONTACT:
Approved Gauger and Accredited
Laboratories Manager, Laboratories and
Scientific Services Directorate, U.S.
Customs and Border Protection, 1300
Pennsylvania Avenue NW, Suite 1500N,
Washington, DC 20229, tel. 202–344–
1060.
SUPPLEMENTARY INFORMATION: Notice is
hereby given pursuant to 19 CFR 151.12
and 19 CFR 151.13, that Intertek USA,
Inc., 1000 Port Carteret Dr., Building C,
Carteret, NJ 07008, has been approved to
SUMMARY:
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
18:43 Apr 10, 2015
API
Chapters
1 ...............
3 ...............
7 ...............
8 ...............
12 .............
17 .............
Title
Vocabulary.
Tank gauging.
Temperature determination.
Sampling.
Calculations.
Maritime measurement.
Intertek USA, Inc., is accredited for
the following laboratory analysis
procedures and methods for petroleum
and certain petroleum products set forth
by the U.S. Customs and Border
Protection Laboratory Methods (CBPL)
and American Society for Testing and
Materials (ASTM):
Title
D–86 ................
D–4052 ............
D–5191 ............
D–93 ................
D–4807 ............
Jkt 235001
gauge petroleum and certain petroleum
products and accredited to test
petroleum and certain petroleum
products for customs purposes, in
accordance with the provisions of 19
CFR 151.12 and 19 CFR 151.13. Intertek
USA, Inc., is approved for the following
gauging procedures for petroleum and
certain petroleum products from the
American Petroleum Institute (API):
PO 00000
Standard
Standard
Standard
Standard
Standard
Frm 00047
test method for distillation of petroleum products at atmospheric pressure.
test method for density and relative density of liquids by digital density meter.
test method for vapor pressure of petroleum products (mini-method).
test methods for flash point by Penske-Martens Closed Cup Tester.
Test Method for Sediment in Crude Oil by Membrane Filtration.
Fmt 4703
Sfmt 4703
E:\FR\FM\13APN1.SGM
13APN1
19677
Federal Register / Vol. 80, No. 70 / Monday, April 13, 2015 / Notices
CBPL No.
ASTM
Title
27–11 ............................
ASTM D–445 ..............
Pending .........................
ASTM D–3606 ............
Pending .........................
ASTM D–5599 ............
Pending .........................
ASTM D–5769 ............
27–53 ............................
27–01 ............................
ASTM D–2709 ............
ASTM D–287 ..............
27–06 ............................
27–13 ............................
ASTM D–473 ..............
ASTM D–4294 ............
27–04 ............................
ASTM D–95 ................
27–46 ............................
ASTM D–5002 ............
Standard test method for kinematic viscosity of transparent and opaque liquids (and calculations of dynamic viscosity).
Standard Test Method for Determination of Benzene and Toluene in Finished Motor and
Aviation Gasoline by Gas Chromatography.
Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection.
Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas
Chromatography/Mass Spectrometry.
Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge.
Standard test method for API gravity of crude petroleum and petroleum products (hydrometer method).
Standard test method for sediment in crude oils and fuel oils by the extraction method.
Standard test method for sulfur in petroleum and petroleum products by energy-dispersive xray fluorescence spectrometry.
Standard test method for water in petroleum products and bituminous materials by distillation.
Standard test method for density and relative density of crude oils by digital density analyzer.
Anyone wishing to employ this entity
to conduct laboratory analyses and
gauger services should request and
receive written assurances from the
entity that it is accredited or approved
by the U.S. Customs and Border
Protection to conduct the specific test or
gauger service requested. Alternatively,
inquiries regarding the specific test or
gauger service this entity is accredited
or approved to perform may be directed
to the U.S. Customs and Border
Protection by calling (202) 344–1060.
The inquiry may also be sent to
CBPGaugersLabs@cbp.dhs.gov. Please
reference the Web site listed below for
a complete listing of CBP approved
gaugers and accredited laboratories
https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories.
Dated: April 2, 2015.
Ira S. Reese,
Executive Director, Laboratories and
Scientific Services Directorate.
[FR Doc. 2015–08188 Filed 4–10–15; 8:45 am]
BILLING CODE 9111–14–P
DEPARTMENT OF HOMELAND
SECURITY
U.S. Customs and Border Protection
Accreditation and Approval of Saybolt,
LP, as a Commercial Gauger and
Laboratory
U.S. Customs and Border
Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and
approval of Saybolt, LP, as a commercial
gauger and laboratory.
AGENCY:
Notice is hereby given,
pursuant to CBP regulations, that
Saybolt, LP, has been approved to gauge
petroleum and certain petroleum
products and accredited to test
petroleum and certain petroleum
products for customs purposes for the
next three years as of August 7, 2014.
DATES: Effective Dates: The
accreditation and approval of Saybolt,
LP, as commercial gauger and laboratory
became effective on August 7, 2014. The
next triennial inspection date will be
scheduled for August 2017.
FOR FURTHER INFORMATION CONTACT:
Approved Gauger and Accredited
Laboratories Manager, Laboratories and
Scientific Services Directorate, U.S.
Customs and Border Protection, 1300
Pennsylvania Avenue NW, Suite 1500N,
SUMMARY:
Washington, DC 20229, tel. 202–344–
1060.
Notice is
hereby given pursuant to 19 CFR 151.12
and 19 CFR 151.13, that Saybolt, LP,
2321 Burnett Blvd., Wilmington, NC
28401, has been approved to gauge
petroleum and certain petroleum
products and accredited to test
petroleum and certain petroleum
products for customs purposes, in
accordance with the provisions of 19
CFR 151.12 and 19 CFR 151.13. Saybolt,
LP is approved for the following gauging
procedures for petroleum and certain
petroleum products from the American
Petroleum Institute (API):
SUPPLEMENTARY INFORMATION:
API
Chapters
3 ...............
7 ...............
8 ...............
9 ...............
12 .............
17 .............
Title
Tank gauging.
Temperature determination.
Sampling.
Density Determination.
Calculations.
Maritime measurement.
Saybolt, LP is accredited for the
following laboratory analysis
procedures and methods for petroleum
and certain petroleum products set forth
by the U.S. Customs and Border
Protection Laboratory Methods (CBPL)
and American Society for Testing and
Materials (ASTM):
ASTM
Title
27–02 ............................
mstockstill on DSK4VPTVN1PROD with NOTICES
CBPL No.
D 1298 ........................
27–06 ............................
27–08 ............................
27–11 ............................
D 473 ..........................
D 86 ............................
D 445 ..........................
27–13 ............................
D 4294 ........................
27–48 ............................
D 4052 ........................
Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of
Crude Petroleum and Liquid Petroleum Products by Hydrometer Method.
Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method.
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure.
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Velocity).
Standard test method for sulfur in petroleum and petroleum products by energy-dispersive xray fluorescence spectrometry.
Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter.
VerDate Sep<11>2014
18:43 Apr 10, 2015
Jkt 235001
PO 00000
Frm 00048
Fmt 4703
Sfmt 4703
E:\FR\FM\13APN1.SGM
13APN1
]]>Agencies
[Federal Register Volume 80, Number 70 (Monday, April 13, 2015)]
[Notices]
[Pages 19676-19677]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2015-08188]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF HOMELAND SECURITY
U.S. Customs and Border Protection
Accreditation and Approval of Intertek USA, Inc., as a Commercial
Gauger and Laboratory
AGENCY: U.S. Customs and Border Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and approval of Intertek USA, Inc., as
a commercial gauger and laboratory.
-----------------------------------------------------------------------
SUMMARY: Notice is hereby given, pursuant to CBP regulations, that
Intertek USA, Inc., has been approved to gauge petroleum and certain
petroleum products and accredited to test petroleum and certain
petroleum products for customs purposes for the next three years as of
September 10, 2014.
DATES: Effective Dates: The accreditation and approval of Intertek USA,
Inc., as commercial gauger and laboratory became effective on September
10, 2014. The next triennial inspection date will be scheduled for
September 2017.
FOR FURTHER INFORMATION CONTACT: Approved Gauger and Accredited
Laboratories Manager, Laboratories and Scientific Services Directorate,
U.S. Customs and Border Protection, 1300 Pennsylvania Avenue NW, Suite
1500N, Washington, DC 20229, tel. 202-344-1060.
SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR
151.12 and 19 CFR 151.13, that Intertek USA, Inc., 1000 Port Carteret
Dr., Building C, Carteret, NJ 07008, has been approved to gauge
petroleum and certain petroleum products and accredited to test
petroleum and certain petroleum products for customs purposes, in
accordance with the provisions of 19 CFR 151.12 and 19 CFR 151.13.
Intertek USA, Inc., is approved for the following gauging procedures
for petroleum and certain petroleum products from the American
Petroleum Institute (API):
------------------------------------------------------------------------
API Chapters Title
------------------------------------------------------------------------
1................................. Vocabulary.
3................................. Tank gauging.
7................................. Temperature determination.
8................................. Sampling.
12................................ Calculations.
17................................ Maritime measurement.
------------------------------------------------------------------------
Intertek USA, Inc., is accredited for the following laboratory
analysis procedures and methods for petroleum and certain petroleum
products set forth by the U.S. Customs and Border Protection Laboratory
Methods (CBPL) and American Society for Testing and Materials (ASTM):
----------------------------------------------------------------------------------------------------------------
CBPL No. ASTM Title
----------------------------------------------------------------------------------------------------------------
27-08................................ ASTM D-86.............. Standard test method for distillation of
petroleum products at atmospheric pressure.
27-48................................ ASTM D-4052............ Standard test method for density and relative
density of liquids by digital density meter.
27-58................................ ASTM D-5191............ Standard test method for vapor pressure of
petroleum products (mini-method).
27-50................................ ASTM D-93.............. Standard test methods for flash point by Penske-
Martens Closed Cup Tester.
27-07................................ ASTM D-4807............ Standard Test Method for Sediment in Crude Oil
by Membrane Filtration.
[[Page 19677]]
27-11................................ ASTM D-445............. Standard test method for kinematic viscosity of
transparent and opaque liquids (and
calculations of dynamic viscosity).
Pending.............................. ASTM D-3606............ Standard Test Method for Determination of
Benzene and Toluene in Finished Motor and
Aviation Gasoline by Gas Chromatography.
Pending.............................. ASTM D-5599............ Standard Test Method for Determination of
Oxygenates in Gasoline by Gas Chromatography
and Oxygen Selective Flame Ionization
Detection.
Pending.............................. ASTM D-5769............ Determination of Benzene, Toluene, and Total
Aromatics in Finished Gasolines by Gas
Chromatography/Mass Spectrometry.
27-53................................ ASTM D-2709............ Standard Test Method for Water and Sediment in
Middle Distillate Fuels by Centrifuge.
27-01................................ ASTM D-287............. Standard test method for API gravity of crude
petroleum and petroleum products (hydrometer
method).
27-06................................ ASTM D-473............. Standard test method for sediment in crude oils
and fuel oils by the extraction method.
27-13................................ ASTM D-4294............ Standard test method for sulfur in petroleum and
petroleum products by energy-dispersive x-ray
fluorescence spectrometry.
27-04................................ ASTM D-95.............. Standard test method for water in petroleum
products and bituminous materials by
distillation.
27-46................................ ASTM D-5002............ Standard test method for density and relative
density of crude oils by digital density
analyzer.
----------------------------------------------------------------------------------------------------------------
Anyone wishing to employ this entity to conduct laboratory analyses
and gauger services should request and receive written assurances from
the entity that it is accredited or approved by the U.S. Customs and
Border Protection to conduct the specific test or gauger service
requested. Alternatively, inquiries regarding the specific test or
gauger service this entity is accredited or approved to perform may be
directed to the U.S. Customs and Border Protection by calling (202)
344-1060. The inquiry may also be sent to CBPGaugersLabs@cbp.dhs.gov.
Please reference the Web site listed below for a complete listing of
CBP approved gaugers and accredited laboratories https://www.cbp.gov/about/labs-scientific/commercial-gaugers-and-laboratories.
Dated: April 2, 2015.
Ira S. Reese,
Executive Director, Laboratories and Scientific Services Directorate.
[FR Doc. 2015-08188 Filed 4-10-15; 8:45 am]
BILLING CODE 9111-14-P
