March 27, 2015 – Federal Register Recent Federal Regulation Documents

Results 151 - 153 of 153
Airworthiness Directives; Dassault Aviation Airplanes
Document Number: 2015-06615
Type: Rule
Date: 2015-03-27
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2011-13-07 for all Dassault Aviation Model FALCON 7X airplanes. AD 2011-13-07 requires revising the airplane flight manual (AFM) to include a procedure to power off a radio-altimeter or revert to the correct radio-altimeter output. This new AD requires revising the AFM to include a simpler procedure to revert to the correct radio-altimeter output. This AD was prompted by an analysis which showed that AFM procedures could be simplified. We are issuing this AD to ensure that the flightcrew has procedures in the event of a radio-altimeter lock-up, which inhibits the display of warnings along with certain abnormal conditions, during the switch into landing mode during altitude cruise. If not corrected, this could result in the flightcrew being unaware of possible system failures that require immediate action by the flightcrew, leading to possible loss of control of the airplane.
Airworthiness Directives; Airbus Airplanes
Document Number: 2015-06583
Type: Rule
Date: 2015-03-27
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Airbus Model A300 and A310 series airplanes, and certain Model A300 B4- 600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). This AD was prompted by a review of certain repairs, which revealed that the structural integrity of the airplane could be negatively affected if those repairs are not re-worked. This AD requires an inspection to identify certain repairs, and corrective action if necessary. We are issuing this AD to detect and correct certain repairs on the floor cross beams flange. If those repairs are not reworked, the structural integrity of the airplane could be negatively affected.
Creating Economic Opportunities for Low- and Very Low-Income Persons and Eligible Businesses Through Strengthened “Section 3” Requirements
Document Number: 2015-06544
Type: Proposed Rule
Date: 2015-03-27
Agency: Department of Housing and Urban Development
Section 3 of the Housing and Urban Development Act of 1968, as amended by the Housing and Community Development Act of 1992 (Section 3), contributes to the establishment of stronger, more sustainable communities by ensuring that employment and other economic opportunities generated by Federal financial assistance for housing and community development programs are, to the greatest extent feasible, directed toward low- and very low-income persons, particularly those who are recipients of government assistance for housing. HUD is statutorily charged with the authority and responsibility to implement and enforce Section 3. HUD's regulations implementing the requirements of Section 3 have not been updated since 1994. This proposed rule would update HUD's Section 3 regulations to address new programs established since 1994 that are subject to the Section 3 requirements and promote compliance with the requirements of Section 3 by recipients of Section 3 covered financial assistance, while also recognizing barriers to compliance that may exist, and strengthening HUD's oversight of Section 3.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.