Revisions to the California State Implementation Plan, Placer County Air Pollution Control District and the Ventura County Air Pollution Control District, 16289-16291 [2015-06858]

Agencies

• ENVIRONMENTAL PROTECTION AGENCY

[Federal Register Volume 80, Number 59 (Friday, March 27, 2015)]
[Rules and Regulations]
[Pages 16289-16291]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2015-06858]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 52

[EPA-R09-OAR-2015-0083; FRL-9924-73-Region 9]


Revisions to the California State Implementation Plan, Placer 
County Air Pollution Control District and the Ventura County Air 
Pollution Control District

AGENCY: Environmental Protection Agency (EPA).

ACTION: Direct final rule.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency (EPA) is taking direct 
final action to approve revisions to the Placer County Air Pollution 
Control District (PCAPCD) and Ventura County Air Pollution Control 
District (VCAPCD) portions of the California State Implementation Plan 
(SIP). These revisions concern volatile organic compound (VOC) 
emissions from the surface coating of plastic parts and products, 
metalworking fluids (MWF) and direct-contact lubricants (DCL). We are 
approving local rules that regulate these emission sources under the 
Clean Air Act (CAA or the Act).

DATES: This rule is effective on May 26, 2015 without further notice, 
unless EPA receives adverse comments by April 27, 2015. If we receive 
such comments, we will publish a timely withdrawal in the Federal 
Register to notify the public that this direct final rule will not take 
effect.

ADDRESSES: Submit comments, identified by docket number EPA-R09-OAR-
2015-0083, by one of the following methods:
    1. Federal eRulemaking Portal: www.regulations.gov. Follow the on-
line instructions.
    2. Email: steckel.andrew@epa.gov.
    3. Mail or deliver: Andrew Steckel (Air-4), U.S. Environmental 
Protection Agency Region IX, 75 Hawthorne Street, San Francisco, CA 
94105-3901.
    Instructions: All comments will be included in the public docket 
without change and may be made available online at www.regulations.gov, 
including any personal information provided, unless the comment 
includes Confidential Business Information (CBI) or other information 
whose disclosure is restricted by statute. Information that you 
consider CBI or otherwise protected should be clearly identified as 
such and should not be submitted through www.regulations.gov or email. 
www.regulations.gov is an ``anonymous access'' system, and EPA will not 
know your identity or contact information unless you provide it in the 
body of your comment. If you send email directly to EPA, your email 
address will be automatically captured and included as part of the 
public comment. If EPA cannot read your comment due to technical 
difficulties and cannot contact you for clarification, EPA may not be 
able to consider your comment. Electronic files should avoid the use of 
special characters, any form of encryption, and be free of any defects 
or viruses.
    Docket: Generally, documents in the docket for this action are 
available electronically at www.regulations.gov and in hard copy at EPA 
Region IX, 75 Hawthorne Street, San Francisco, California 94105-3901. 
While all documents in the docket are listed at www.regulations.gov, 
some information may be publicly available only at the hard copy 
location (e.g., copyrighted material, large maps), and some may not be 
publicly available in either location (e.g., CBI). To inspect the hard 
copy materials, please schedule an appointment during normal business 
hours with the contact listed in the FOR FURTHER INFORMATION CONTACT 
section.

FOR FURTHER INFORMATION CONTACT: Arnold Lazarus, EPA Region IX, (415) 
947-3024, lazarus.arnold@epa.gov.

SUPPLEMENTARY INFORMATION: Throughout this document, ``we,'' ``us,'' 
and ``our'' refer to EPA.

Table of Contents

I. The State's Submittal
    A. What rules did the State submit?
    B. Are there other versions of these rules?

[[Page 16290]]

    C. What is the purpose of the submitted rules?
II. EPA's Evaluation and Action
    A. How is EPA evaluating the rules?
    B. Do the rules meet the evaluation criteria?
    C. EPA Recommendations To Further Improve the Rules
    D. Public Comment and Final Action
III. Incorporation by Reference
IV. Statutory and Executive Order Reviews

I. The State's Submittal

A. What rules did the State submit?

    Table 1 lists the rules addressed by this Submittal with the dates 
that they were adopted by the local air agencies and submitted by the 
California Air Resources Board.

                                            Table 1--Submitted Rules
----------------------------------------------------------------------------------------------------------------
           Local agency                Rule number             Rule title             Adopted        Submitted
----------------------------------------------------------------------------------------------------------------
PCAPCD............................  249..............  Surface Coating of                 8/8/13         5/13/14
                                                        Plastic Parts and
                                                        Products.
VCAPCD............................  74.31............  Metalworking Fluids and          11/12/13         5/13/14
                                                        Direct-Contact
                                                        Lubricants.
----------------------------------------------------------------------------------------------------------------

    On July 18, 2014, EPA determined that the submittals for PCAPCD 
Rule 249 and VCAPCD Rule 74.31 met the completeness criteria in 40 CFR 
part 51 Appendix V, which must be met before formal EPA review.

B. Are there other versions of these rules?

    There are no previous versions of PCAPCD Rule 249 or VCAPCD Rule 
74.31 in the SIP.

C. What is the purpose of the submitted rules?

    VOCs help produce ground-level ozone and smog, which harm human 
health and the environment. Section 110(a) of the CAA requires States 
to submit regulations that control VOC emissions. Rule 249 establishes 
VOC content limits and workplace standards for the surface coating of 
plastic parts and products. It also describes related recordkeeping, 
reporting, and monitoring requirements. Rule 74.31 establishes VOC 
content limits and usage for MWF and DCL. Rule 74.31 applies to any 
person who uses MWF and DCL commercially or industrially and to any 
manufacturer or supplier who supplies, sells, or offers for sale either 
MWF or DCL for use at industrial or commercial facilities. Such persons 
must use compliant fluids as specified by rule 74.31. EPA's technical 
support documents (TSDs) have more information about these rules.

II. EPA's Evaluation and Action

A. How is EPA evaluating the rules?

    40 CFR 81.305 describes PCAPCD as regulating an ozone nonattainment 
area classified as Severe and VCAPCD classified as Serious for the 8-
hour ozone National Ambient Air Quality Standard (NAAQS) (2008 
Standard). SIP rules must be enforceable (see CAA section 110(a)(2)), 
must not interfere with applicable requirements concerning attainment 
and reasonable further progress or other CAA requirements (see CAA 
section 110(l)), and must not modify certain SIP control requirements 
in nonattainment areas without ensuring equivalent or greater emissions 
reductions (see CAA section 193).
    Generally, SIP rules must require Reasonably Available Control 
Technology (RACT) for each category of sources covered by a Control 
Techniques Guidelines (CTG) document as well as each VOC major source 
in ozone nonattainment areas classified as moderate or above (see 
sections 182(b)(2) and 182(f)).
    Guidance and policy documents that we use to evaluate 
enforceability, revision/relaxation and rule stringency requirements 
for the applicable criteria pollutants include the following:

1. ``State Implementation Plans; General Preamble for the 
Implementation of Title I of the Clean Air Act Amendments of 1990,'' 
(57 FR 13498, April 16, 1992 and 57 FR 18070, April 28, 1992).
2. ``Issues Relating to VOC Regulation Cutpoints, Deficiencies, and 
Deviations'' (``the Bluebook,'' U.S. EPA, May 25, 1988; revised 
January 11, 1990).
3. ``Guidance Document for Correcting Common VOC & Other Rule 
Deficiencies'' (``the Little Bluebook'', EPA Region 9, August 21, 
2001).
4. ``Control Techniques Guidelines for Miscellaneous Metal and 
Plastic Parts Coatings'' (CTG), September 2008. (EPA 453-R-008-003).

B. Do the rules meet the evaluation criteria?

    We believe these rules are consistent with the relevant policy and 
guidance regarding enforceability, RACT, and SIP relaxations. The VOC 
content limits and usage requirements in Rule 249 are equivalent or 
more stringent to the relevant sections of EPA's 2008 metal parts CTG, 
implement RACT and strengthen the SIP. Rule 74.31 strengthens the SIP 
because the VCAPCD did not have a SIP approved rule regulating MWF and 
DCL and there exists no relevant CTG, but we also believe Rule 74.31 
implements RACT. The TSDs associated with each rule have more 
information on our evaluation.

C. EPA Recommendations To Further Improve the Rules

    The TSDs describe additional rule revisions that we recommend for 
the next time the local agencies modify the rules but are not currently 
the basis for rule disapproval.

D. Public Comment and Final Action

    As authorized in section 110(k)(3) of the Act, EPA is fully 
approving the submitted rules because we believe they fulfill all 
relevant requirements. We do not think anyone will object to this 
approval, so we are finalizing it without proposing it in advance. 
However, in the Proposed Rules section of this Federal Register, we are 
simultaneously proposing approval of the same submitted rules. If we 
receive adverse comments by April 27, 2015, we will publish a timely 
withdrawal in the Federal Register to notify the public that the direct 
final approval will not take effect and we will address the comments in 
a subsequent final action based on the proposal. If we do not receive 
timely adverse comments, the direct final approval will be effective 
without further notice on May 26, 2015. This will incorporate these 
rules into the federally enforceable SIP.
    Please note that if EPA receives adverse comment on an amendment, 
paragraph, or section of this rule and if that provision may be severed 
from the remainder of the rule, EPA may adopt as final those provisions 
of the rule that are not the subject of an adverse comment.

III. Incorporation by Reference

    In this rule, the EPA is finalizing regulatory text that includes 
incorporation by reference. In

[[Page 16291]]

accordance with requirements of 1 CFR 51.5, the EPA is finalizing the 
incorporation by reference of the PCAPCD and VCAPCD rules described in 
the amendments to 40 CFR 52 set forth below. The EPA has made, and will 
continue to make, these documents available electronically through 
www.regulations.gov and in hard copy at the appropriate EPA office (see 
the ADDRESSES section of this preamble for more information).

IV. Statutory and Executive Order Reviews

    Under the Clean Air Act, the Administrator is required to approve a 
SIP submission that complies with the provisions of the Act and 
applicable Federal regulations. 42 U.S.C. 7410(k); 40 CFR 52.02(a). 
Thus, in reviewing SIP submissions, EPA's role is to approve State 
choices, provided that they meet the criteria of the Clean Air Act. 
Accordingly, this action merely approves State law as meeting Federal 
requirements and does not impose additional requirements beyond those 
imposed by State law. For that reason, this action:
     Is not a ``significant regulatory action'' subject to 
review by the Office of Management and Budget under Executive Order 
12866 (58 FR 51735, October 4, 1993);
     Does not impose an information collection burden under the 
provisions of the Paperwork Reduction Act (44 U.S.C. 3501 et seq.);
     Is certified as not having a significant economic impact 
on a substantial number of small entities under the Regulatory 
Flexibility Act (5 U.S.C. 601 et seq.);
     Does not contain any unfunded mandate or significantly or 
uniquely affect small governments, as described in the Unfunded 
Mandates Reform Act of 1995 (Pub. L. 104-4);
     Does not have Federalism implications as specified in 
Executive Order 13132 (64 FR 43255, August 10, 1999);
     Is not an economically significant regulatory action based 
on health or safety risks subject to Executive Order 13045 (62 FR 
19885, April 23, 1997);
     Is not a significant regulatory action subject to 
Executive Order 13211 (66 FR 28355, May 22, 2001);
     Is not subject to requirements of Section 12(d) of the 
National Technology Transfer and Advancement Act of 1995 (15 U.S.C. 272 
note) because application of those requirements would be inconsistent 
with the Clean Air Act; and
     Does not provide EPA with the discretionary authority to 
address disproportionate human health or environmental effects with 
practical, appropriate, and legally permissible methods under Executive 
Order 12898 (59 FR 7629, February 16, 1994).
    The SIP is not approved to apply on any Indian reservation land or 
in any other area where EPA or an Indian tribe has demonstrated that a 
tribe has jurisdiction. In those areas of Indian country, the rule does 
not have tribal implications and will not impose substantial direct 
costs on tribal governments or preempt tribal law as specified by 
Executive Order 13175 (65 FR 67249, November 9, 2000).
    The Congressional Review Act, 5 U.S.C. 801 et seq., as added by the 
Small Business Regulatory Enforcement Fairness Act of 1996, generally 
provides that before a rule may take effect, the agency promulgating 
the rule must submit a rule report, which includes a copy of the rule, 
to each House of the Congress and to the Comptroller General of the 
United States. EPA will submit a report containing this action and 
other required information to the U.S. Senate, the U.S. House of 
Representatives, and the Comptroller General of the United States prior 
to publication of the rule in the Federal Register. A major rule cannot 
take effect until 60 days after it is published in the Federal 
Register. This action is not a ``major rule'' as defined by 5 U.S.C. 
804(2).
    Under section 307(b)(1) of the Clean Air Act, petitions for 
judicial review of this action must be filed in the United States Court 
of Appeals for the appropriate circuit by May 26, 2015. Filing a 
petition for reconsideration by the Administrator of this final rule 
does not affect the finality of this action for the purposes of 
judicial review nor does it extend the time within which a petition for 
judicial review may be filed, and shall not postpone the effectiveness 
of such rule or action. Parties with objections to this direct final 
rule are encouraged to file a comment in response to the parallel 
notice of proposed rulemaking for this action published in the Proposed 
Rules section of today's Federal Register, rather than file an 
immediate petition for judicial review of this direct final rule, so 
that EPA can withdraw this direct final rule and address the comment in 
the proposed rulemaking. This action may not be challenged later in 
proceedings to enforce its requirements (see section 307(b)(2)).

List of Subjects in 40 CFR Part 52

    Environmental protection, Air pollution control, Incorporation by 
reference, Intergovernmental relations, Ozone, Reporting and 
recordkeeping requirements, Volatile organic compounds.

    Dated: February 27, 2015.
Jared Blumenfeld,
Regional Administrator, Region IX.

    Part 52, Chapter I, Title 40 of the Code of Federal Regulations is 
amended as follows:

PART 52--APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS

0
1. The authority citation for Part 52 continues to read as follows:

    Authority: 42 U.S.C. 7401 et seq.

Subpart F--California

0
2. Section 52.220 is amended by adding paragraphs (c)(441)(i)(B)(3) and 
(c)(441)(i)(C)(2) to read as follows:


Sec.  52.220  Identification of plan.

* * * * *
    (c) * * *
    (441) * * *
    (i) * * *
    (B) * * *
    (3) Rule 249, ``Surface Coating of Plastic Parts and Products,'' 
adopted on August 8, 2013.
    (C) * * *
    (2) Metalworking Fluids and Direct-Contact Lubricants,'' adopted on 
November 12, 2013.
* * * * *
[FR Doc. 2015-06858 Filed 3-26-15; 8:45 am]
BILLING CODE 6560-50-P