U.S. Industrial Base Surveys Pursuant to the Defense Production Act of 1950; Correction, 12364 [2015-05324]
Download as PDF
<![CDATA[
12364
Federal Register / Vol. 80, No. 45 / Monday, March 9, 2015 / Proposed Rules
by the Manager, International Branch, ANM–
116, Transport Airplane Directorate, FAA; or
the European Aviation Safety Agency
(EASA); or Airbus’s EASA Design
Organization Approval (DOA). If approved by
the DOA, the approval must include the
DOA-authorized signature.
(i) No Alternative Actions or Intervals
After accomplishing the revision required
by paragraph (g) of this AD, no alternative
actions (e.g., inspections) or intervals may be
used unless the actions or intervals are
approved as an alternative method of
compliance (AMOC) in accordance with the
procedures specified in paragraph (j)(1) of
this AD.
tkelley on DSK3SPTVN1PROD with PROPOSALS
MZ4339390–02X, MZ4306000–02X,
MZ4339390–10X, or MZ4306000–10X as
‘‘March 5, 2010,’’ the calendar compliance
time is April 14, 2011 (18 months after
October 14, 2009 (the effective date of AD
2009–18–20, Amendment 39–16017 (74 FR
46313, September 9, 2009))).
(6) Where Note (6) of ‘‘ATA 27–64–
00 Flight Control—Spoiler Hydraulic
Actuation,’’ of Sub-part 4–2–1, ‘‘Life Limits,’’
of Sub-part 4–2, ‘‘Systems Life Limited
Components,’’ of Airbus A330 ALS Part 4—
Aging Systems Maintenance, Revision 04,
dated August 27, 2013, defines a calendar
date of ‘‘September 5, 2008,’’ as a date for the
determination of accumulated flight cycles
since the aircraft initial entry into service, the
date is October 14, 2009 (the effective date
of AD 2009–18–20, Amendment 39–16017
(74 FR 46313, September 9, 2009)).
(7) Where Note (6) of ‘‘ATA 27–64–00
Flight Control—Spoiler Hydraulic
Actuation,’’ of Sub-part 4–2–1, ‘‘Life Limits,’’
of Sub-part 4–2, ‘‘Systems Life Limited
Components,’’ of Airbus A330 ALS Part 4—
Aging Systems Maintenance, Revision 04,
dated August 27, 2013, defines a calendar
compliance time as ‘‘March 5, 2010,’’ for the
modification of affected servo controls, the
calendar compliance time is April 14, 2011
(18 months after October 14, 2009 (the
effective date of AD 2009–18–20,
Amendment 39–16017 (74 FR 46313,
September 9, 2009))).
[FR Doc. 2015–05031 Filed 3–6–15; 8:45 am]
15 CFR Part 702
AGENCY:
(j) Other FAA AD Provisions
The following provisions also apply to this
AD:
(1) Alternative Methods of Compliance
(AMOCs): The Manager, International
Branch, ANM–116, Transport Airplane
Directorate, FAA, has the authority to
approve AMOCs for this AD, if requested
using the procedures found in 14 CFR 39.19.
In accordance with 14 CFR 39.19, send your
request to your principal inspector or local
Flight Standards District Office, as
appropriate. If sending information directly
to the International Branch, send it to ATTN:
Vladimir Ulyanov, Aerospace Engineer,
International Branch, ANM–116, Transport
Airplane Directorate, FAA, 1601 Lind
Avenue SW., Renton, WA 98057–3356;
telephone 425–227–1138; fax 425–227–1149.
Information may be emailed to: 9-ANM-116ACO-AMOC-REQUESTS@faa.gov. Before
using any approved AMOC, notify your
appropriate principal inspector, or lacking a
principal inspector, the manager of the local
flight standards district office/certificate
holding district office. The AMOC approval
letter must specifically reference this AD.
(2) Contacting the Manufacturer: For any
requirement in this AD to obtain corrective
actions from a manufacturer, the action must
be accomplished using a method approved
[RIN 0694–AG17]
HHS.
VerDate Sep<11>2014
17:26 Mar 06, 2015
Jkt 235001
(k) Related Information
(1) Refer to Mandatory Continuing
Airworthiness Information (MCAI) European
Aviation Safety Agency (EASA) AD 2013–
0268, dated November 7, 2013, for related
information. You may examine the MCAI in
the AD docket on the Internet at https://
www.regulations.gov/
#!documentDetail;D=FAA-2013-0834-0003.
(2) For service information identified in
this AD, contact Airbus SAS, Airworthiness
Office—EAL, 1 Rond Point Maurice Bellonte,
31707 Blagnac Cedex, France; telephone +33
5 61 93 36 96; fax +33 5 61 93 45 80; email
airworthiness.A330–A340@airbus.com;
Internet https://www.airbus.com. You may
view this service information at the FAA,
Transport Airplane Directorate, 1601 Lind
Avenue SW., Renton, WA. For information
on the availability of this material at the
FAA, call 425–227–1221.
Issued in Renton, Washington, on February
20, 2015.
Victor Wicklund,
Acting Manager, Transport Airplane
Directorate, Aircraft Certification Service.
Comments may be
submitted:
• Via the Federal eRulemaking Portal:
https://www.regulations.gov. Search for
this rule using its regulations.gov docket
number: BIS–2015–0010.
• By email directly to
publiccomments@bis.doc.gov. Include
‘‘RIN 0694–AG17’’ in the subject line.
• By mail or delivery to Regulatory
Policy Division, Bureau of Industry and
Security, U.S. Department of Commerce,
Room 2099B, 14th Street and
Pennsylvania Avenue NW., Washington,
DC 20230. Refer to ‘‘RIN 0694–AG17.’’
ADDRESSES:
Dated: March 3, 2015.
Matthew S. Borman,
Deputy Assistant Secretary for Export
Administration.
[FR Doc. 2015–05324 Filed 3–6–15; 8:45 am]
BILLING CODE 3510–33–P
DEPARTMENT OF HEALTH AND
HUMAN SERVICES
Food and Drug Administration
21 CFR Parts 201, 606, and 610
[Docket No. FDA–2007–N–0363]
BILLING CODE 4910–13–P
RIN 0910–AG18
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
U.S. Industrial Base Surveys Pursuant
to the Defense Production Act of 1950;
Correction
Bureau of Industry and
Security, Commerce.
ACTION: Proposed rule; correction.
AGENCY:
This rule corrects the
preamble to a proposed rule published
in the Federal Register of March 3,
2015, regarding U.S. Industrial Base
Surveys by adding the inadvertently
omitted ADDRESSES Caption.
DATES: March 9, 2015.
FOR FURTHER INFORMATION CONTACT:
William Arvin, Bureau of Industry and
Security Regulatory Policy Division,
202–482–2440 or william.arvin@
bis.doc.gov.
SUMMARY:
Correction
In proposed rule FR Doc. 2015–04299,
on page 11350 in the issue of March 3,
2015, in the first column, immediately
following the DATES section, add the
following:
PO 00000
Frm 00013
Fmt 4702
Sfmt 4702
Electronic Distribution of Prescribing
Information for Human Prescription
Drugs, Including Biological Products;
Extension of Comment Period
Food and Drug Administration,
Proposed rule; extension of
comment period.
ACTION:
The Food and Drug
Administration (FDA) is extending the
comment period for the proposed rule
that appeared in the Federal Register of
December 18, 2014. In the proposed
rule, FDA requested comments on its
proposal to amend its labeling
regulations for human prescription
drugs and biological products to require
that the prescribing information
intended for health care professionals
that is on or within the package from
which the product is dispensed be
distributed electronically and not in
paper form, except as provided by the
proposed rule. The Agency is taking this
action in response to a request for an
extension to allow interested persons
additional time to submit comments.
DATES: FDA is extending the comment
period on the proposed rule published
on December 18, 2014 (79 FR 75506).
Submit either electronic or written
comments by May 18, 2015.
SUMMARY:
E:\FR\FM\09MRP1.SGM
09MRP1
]]>Agencies
[Federal Register Volume 80, Number 45 (Monday, March 9, 2015)]
[Proposed Rules]
[Page 12364]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2015-05324]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
15 CFR Part 702
[RIN 0694-AG17]
U.S. Industrial Base Surveys Pursuant to the Defense Production
Act of 1950; Correction
AGENCY: Bureau of Industry and Security, Commerce.
ACTION: Proposed rule; correction.
-----------------------------------------------------------------------
SUMMARY: This rule corrects the preamble to a proposed rule published
in the Federal Register of March 3, 2015, regarding U.S. Industrial
Base Surveys by adding the inadvertently omitted ADDRESSES Caption.
DATES: March 9, 2015.
FOR FURTHER INFORMATION CONTACT: William Arvin, Bureau of Industry and
Security Regulatory Policy Division, 202-482-2440 or
william.arvin@bis.doc.gov.
Correction
In proposed rule FR Doc. 2015-04299, on page 11350 in the issue of
March 3, 2015, in the first column, immediately following the DATES
section, add the following:
ADDRESSES: Comments may be submitted:
Via the Federal eRulemaking Portal: https://www.regulations.gov. Search for this rule using its regulations.gov
docket number: BIS-2015-0010.
By email directly to publiccomments@bis.doc.gov. Include
``RIN 0694-AG17'' in the subject line.
By mail or delivery to Regulatory Policy Division, Bureau
of Industry and Security, U.S. Department of Commerce, Room 2099B, 14th
Street and Pennsylvania Avenue NW., Washington, DC 20230. Refer to
``RIN 0694-AG17.''
Dated: March 3, 2015.
Matthew S. Borman,
Deputy Assistant Secretary for Export Administration.
[FR Doc. 2015-05324 Filed 3-6-15; 8:45 am]
BILLING CODE 3510-33-P
