Foreign-Trade Zone 119-Minneapolis, Minnesota; Authorization of Production Activity; MAT Industries, LLC (Air Compressors and Pressure Washers); Springfield, Minnesota, 9693 [2015-03774]

Download as PDF Federal Register / Vol. 80, No. 36 / Tuesday, February 24, 2015 / Notices respondents, including the use of automated, electronic, mechanical, or other technological collection techniques or other forms of information technology. All comments received in response to this notice, including names and addresses when provided, will be a matter of public record. Comments will be summarized and included in the submission request toward Office of Management and Budget approval. Dated: February 13, 2015. Leslie A.C. Weldon, Deputy Chief, National Forest System. [FR Doc. 2015–03649 Filed 2–23–15; 8:45 am] a notification of proposed production activity to the Foreign-Trade Zones (FTZ) Board for its facility in Springfield, Minnesota. The notification was processed in accordance with the regulations of the FTZ Board (15 CFR part 400), including notice in the Federal Register inviting public comment (79 FR 64168, 10–28– 2014). The FTZ Board has determined that no further review of the activity is warranted at this time. The production activity described in the notification is authorized, subject to the FTZ Act and the FTZ Board’s regulations, including Section 400.14. Dated: February 18, 2015. Andrew McGilvray, Executive Secretary. BILLING CODE 3411–15–P DEPARTMENT OF COMMERCE [FR Doc. 2015–03774 Filed 2–23–15; 8:45 am] Foreign-Trade Zones Board BILLING CODE 3510–DS–P [B–74–2014] DEPARTMENT OF COMMERCE Foreign-Trade Zone 283—Jackson, Tennessee; Authorization of Production Activity MAT Industries, LLC (Air Compressors), Jackson, Tennessee Foreign-Trade Zones Board [B–10–2015] On October 14, 2014, MAT Industries, LLC, operator of FTZ 283—Site 11, submitted a notification of proposed production activity to the Foreign-Trade Zones (FTZ) Board for its facility in Jackson, Tennessee. The notification was processed in accordance with the regulations of the FTZ Board (15 CFR part 400), including notice in the Federal Register inviting public comment (79 FR 64167–64168, 10–28–2014). The FTZ Board has determined that no further review of the activity is warranted at this time. The production activity described in the notification is authorized, subject to the FTZ Act and the FTZ Board’s regulations, including Section 400.14. Dated: February 18, 2015. Andrew McGilvray, Executive Secretary. [FR Doc. 2015–03754 Filed 2–23–15; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board tkelley on DSK3SPTVN1PROD with NOTICES [B–75–2014] Foreign-Trade Zone 119—Minneapolis, Minnesota; Authorization of Production Activity; MAT Industries, LLC (Air Compressors and Pressure Washers); Springfield, Minnesota On October 14, 2014, MAT Industries, LLC, an operator of FTZ 119, submitted VerDate Sep<11>2014 17:31 Feb 23, 2015 Jkt 235001 Foreign-Trade Zone (FTZ) 245— Decatur, Illinois; Notification of Proposed Production Activity; Thyssenkrupp Presta Danville, LLC; (Camshafts); Danville, Illinois The Economic Development Corporation of Decatur & Macon County, grantee of FTZ 245, submitted a notification of proposed production activity to the FTZ Board on behalf of Thyssenkrupp Presta Danville, LLC (Thyssenkrupp Presta), located in Danville, Illinois. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on February 18, 2015. A separate application for subzone designation at the Thyssenkrupp Presta facility was submitted and will be processed under Section 400.31 of the Board’s regulations. The facility is used for the production of camshafts for the automotive industry. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status materials and components and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Thyssenkrupp Presta from customs duty payments on the foreign status components used in export production. On its domestic sales, Thyssenkrupp Presta would be able to choose the duty rates during customs entry procedures that apply to PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 9693 camshafts for use with spark-ignition internal combustion piston engines (duty rate 2.5%) for the foreign status inputs noted below. Customs duties also could possibly be deferred or reduced on foreign status production equipment. The components and materials sourced from abroad include: Welded, cold-drawn steel tubes; camlobes; nosepieces; sensor rings; sprockets; thrust rings; cap plugs; thrust washers; end plugs; and, end caps (duty rate ranges from duty-free to 2.8%). Public comment is invited from interested parties. Submissions shall be addressed to the Board’s Executive Secretary at the address below. The closing period for their receipt is April 6, 2015. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the Board’s Web site, which is accessible via www.trade.gov/ftz. For further information, contact Elizabeth Whiteman at Elizabeth.Whiteman@trade.gov or (202) 482–0473. Dated: February 18, 2015. Andrew McGilvray, Executive Secretary. [FR Doc. 2015–03771 Filed 2–23–15; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–9–2015] Foreign-Trade Zone (FTZ) 134— Chattanooga, Tennessee; Notification of Proposed Production Activity; Volkswagen Group of America Chattanooga Operations, LLC; (Motor Vehicles); Chattanooga, Tennessee The Chattanooga Chamber Foundation, grantee of FTZ 134, submitted a notification of proposed production activity to the FTZ Board on behalf of Volkswagen Group of America Chattanooga Operations, LLC (VGACO), located in Chattanooga, Tennessee. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on January 23, 2015. VGACO already has authority to produce passenger sedans, sport utility vehicles, and minivans within Site 3 of FTZ 134. The current request would add certain foreign-status materials and E:\FR\FM\24FEN1.SGM 24FEN1

Agencies

[Federal Register Volume 80, Number 36 (Tuesday, February 24, 2015)]
[Notices]
[Page 9693]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2015-03774]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-75-2014]


Foreign-Trade Zone 119--Minneapolis, Minnesota; Authorization of 
Production Activity; MAT Industries, LLC (Air Compressors and Pressure 
Washers); Springfield, Minnesota

    On October 14, 2014, MAT Industries, LLC, an operator of FTZ 119, 
submitted a notification of proposed production activity to the 
Foreign-Trade Zones (FTZ) Board for its facility in Springfield, 
Minnesota.
    The notification was processed in accordance with the regulations 
of the FTZ Board (15 CFR part 400), including notice in the Federal 
Register inviting public comment (79 FR 64168, 10-28-2014). The FTZ 
Board has determined that no further review of the activity is 
warranted at this time. The production activity described in the 
notification is authorized, subject to the FTZ Act and the FTZ Board's 
regulations, including Section 400.14.

    Dated: February 18, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2015-03774 Filed 2-23-15; 8:45 am]
BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.