Hazardous Materials: Miscellaneous Amendments (RRR), 3787-3838 [2015-00265]
Download as PDF
Vol. 80
Friday,
No. 15
January 23, 2015
Part III
Department of Transportation
tkelley on DSK3SPTVN1PROD with PROPOSALS3
Pipeline and Hazardous Materials Safety Administration
49 CFR Parts 107, 171, 172 et al.
Hazardous Materials: Miscellaneous Amendments (RRR); Proposed Rule
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00001
Fmt 4717
Sfmt 4717
E:\FR\FM\23JAP3.SGM
23JAP3
3788
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
DEPARTMENT OF TRANSPORTATION
Pipeline and Hazardous Materials
Safety Administration
49 CFR Parts 107, 171, 172, 173, 175,
176, 177, 178, 179 and 180
[Docket No. PHMSA–2013–0225 (HM–218H)]
RIN 2137–AF04
Hazardous Materials: Miscellaneous
Amendments (RRR)
Pipeline and Hazardous
Materials Safety Administration
(PHMSA), DOT.
ACTION: Notice of Proposed Rulemaking
(NPRM).
AGENCY:
PHMSA proposes to make
miscellaneous amendments to the
Hazardous Materials Regulations to
update and clarify certain regulatory
requirements. These proposed
amendments are designed to promote
safer transportation practices, address
petitions for rulemaking, respond to
National Transportation Safety Board
(NTSB) Safety Recommendations,
facilitate international commerce, make
editorial corrections, and simplify the
regulations. The proposed provisions in
this rulemaking include, but are not
limited to, removing the packing group
(PG) II designation for certain organic
peroxides, self-reactive substances and
explosives, incorporating requirements
for trailers of manifolded acetylene
cylinders, and providing requirements
to allow for shipments of damaged wet
electric batteries. In addition, this
rulemaking proposes to revise the
requirements for the packaging of nitric
acid, testing of pressure relief devices
on cargo tanks, and shipments of black
or smokeless powder for small arms.
DATES: Comments must be received by
March 24, 2015.
ADDRESSES: You may submit comments
by any of the following methods:
SUMMARY:
• Federal Rulemaking Portal: https://
www.regulations.gov. Follow the
instructions for submitting comments.
• Fax: 202–493–2251.
• Mail: Dockets Management System;
U.S. Department of Transportation,
Dockets Operations, M–30, Ground
Floor, Room W12–140, 1200 New Jersey
Avenue SE., Washington, DC 20590–
0001.
• Hand Delivery: To U.S. Department
of Transportation, Dockets Operations,
M–30, Ground Floor, Room W12–140,
1200 New Jersey Avenue SE.,
Washington, DC 20590–0001, between
9:00 a.m. and 5:00 p.m., Monday
through Friday, except Federal holidays.
Instructions: Include the agency name
and docket number PHMSA–2013–0225
(HM–218H) or rule identification
number (RIN 2137–AF04) for this
rulemaking at the beginning of your
comment. Note that all comments
received will be posted without change
to https://www.regulations.gov including
any personal information provided. If
sent by mail, comments must be
submitted in duplicate. Persons wishing
to receive confirmation of receipt of
their comments must include a selfaddressed stamped postcard.
Privacy Act: Anyone is able to search
the electronic form of any written
communications and comments
received into any of our dockets by the
name of the individual submitting the
document (or signing the document, if
submitted on behalf of an association,
business, labor union, etc.). You may
review DOT’s complete Privacy Act
Statement at https://www.dot.gov/
privacy.
Docket: You may view the public
docket through the Internet at https://
www.regulations.gov or in person at the
Docket Operations office at the above
address (See ADDRESSES).
FOR FURTHER INFORMATION CONTACT: Neal
Suchak or Aaron Wiener, Standards and
Rulemaking Division, (202) 366–8553,
Pipeline and Hazardous Materials Safety
Administration, U.S. Department of
Transportation, 1200 New Jersey
Avenue SE., Washington, DC 20590–
0001.
SUPPLEMENTARY INFORMATION:
Contents
I. Background
II. Incorporation by Reference Discussion
Under 1 CFR part 51
III. Petitions for Rulemaking and National
Transportation Safety Board
Recommendations
IV. Section-by-Section Review
V. Regulatory Analyses and Notices
A. Statutory/Legal Authority for the
Rulemaking
B. Executive Order 12866, Executive Order
13563 and DOT Regulatory Policies and
Procedures
C. Executive Order 13132
D. Executive Order 13175
E. Regulatory Flexibility Act, Executive
Order 13272, and DOT Procedures and
Policies
F. Paperwork Reduction Act
G. Regulatory Identifier Number (RIN)
H. Unfunded Mandates Reform Act
I. Environmental Assessment
J. Privacy Act
K. International Trade Analysis
I. Background
The purpose of this NPRM is to
update and clarify the Hazardous
Materials Regulations (HMR; 49 CFR
parts 171–180) based on PHMSA’s own
initiatives. The proposed changes were
identified through an extensive review
of the HMR and letters of interpretation
issued to the public. In addition, this
NPRM proposes regulatory requirements
that respond to seven petitions for
rulemaking and addresses two NTSB
Safety Recommendations. To this end,
PHMSA is proposing to revise, clarify,
and ease certain regulatory
requirements.
A. Petitions for Rulemaking
The following table provides a brief
summary of the petitions addressed in
this NPRM and affected sections. These
petitions are included in the docket for
this proceeding:
Petitioner
Summary
P–1590 ....
P–1591 ....
tkelley on DSK3SPTVN1PROD with PROPOSALS3
Petition
Dangerous Goods Advisory
Council (DGAC).
Air Products and Chemicals, Inc
P–1597 ....
DGAC ........................................
P–1601 ....
United Parcel Service (UPS) .....
P–1604 ....
National Propane Gas Association (NPGA).
Compressed Gas Association
(CGA).
Remove the PG II designation for certain organic peroxides, self-reactive substances and explosives in the § 172.101 Hazardous Materials Table (HMT).
Amend the marking requirements for poisonous by inhalation shipments transported in accordance with the International Maritime Dangerous Goods (IMDG) Code or Transport Canada’s
Transport of Dangerous Goods (TDG) Regulations (§ 171.23).
Require that emergency response telephone numbers be displayed on shipping papers numerically (§ 172.604).
Amend the packaging instructions for certain shipments of nitric acid by requiring intermediate
packaging for glass inner packagings (§ 173.158).
Extend the pressure test and internal visual inspection test period to ten years for certain MC
331 cargo tanks in dedicated propane delivery service (§ 180.407).
Incorporate by reference in § 171.7 CGA Pamphlet G–1.6, Standard for Mobile Acetylene Trailer
Systems, Seventh Edition (§§ 171.7 and 173.301).
P–1605 ....
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00002
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
23JAP3
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
3789
Petition
Petitioner
Summary
P–1609 ....
Truck Trailer Manufacturers Association (TTMA).
Clarify the requirements applicable to the testing of pressure relief devices for cargo tank motor
vehicles (§ 180.407).
B. NTSB Safety Recommendations
The following table provides a brief
summary of the NTSB recommendations
addressed in this NPRM and affected
sections. These recommendations are
included in the docket for this
proceeding:
Recommendation
Summary
H–09–01 ............
Modify 49 CFR § 173.301 to clearly require (1) that cylinders be securely mounted on mobile acetylene trailers and other
trailers with manifolded cylinders to reduce the likelihood of cylinders being ejected during an accident and (2) that the cylinder valves, piping, and fittings be protected from multidirectional impact forces that are likely to occur during highway accidents, including rollovers.
Require fail-safe equipment that ensures that operators of mobile acetylene trailers can perform unloading procedures only
correctly and in sequence.
H–09–02 ............
tkelley on DSK3SPTVN1PROD with PROPOSALS3
C. Amendments Based on PHMSA
Review
In addition to addressing the petitions
for rulemaking and the NTSB
recommendations listed above, this
rulemaking proposes the following
amendments that were identified
through our retrospective review of the
49 CFR. We summarize the changes as
follows:
• Revise § 107.402(d)(2) to replace the
term ‘‘citizen’’ with the term ‘‘resident.’’
• Revise § 107.402(e) to require that a
lighter certification agency submits a
statement that the agency is
independent of and not owned by a
lighter manufacturer, distributor, import
or export company, or proprietorship.
• Revise § 107.402(f) to require
portable tank and multi-element gas
container (MEGC) certification agencies
to submit a statement indicating that the
agency is independent of and not owned
by a portable tank or MEGC
manufacturer, owner, or distributor.
• Revise § 107.807 to require a
cylinder inspection agency to be
independent of and not owned by a
cylinder manufacturer, owner, or
distributor.
• Remove the entry for CGA
Pamphlet C–1.1 in Table 1 to § 171.7.
• Incorporate by reference updated
versions of the American Association of
Railroads (AAR) Manual of Standards
and Recommended Practices, Section
C–III, Specifications for Tank Cars,
Specification M–1002 in § 171.7.
• Revise the § 172.101 table to add
Special Provision B120 to Column (7)
for the entry ‘‘Calcium nitrate,
UN1454.’’
• Revise the entry for ‘‘Propellant,
solid, UN0501’’ to remove vessel
stowage provision 24E from Column
(10B) of the HMT.
• Revise the PG II HMT entry for
‘‘UN2920, Corrosive liquids, flammable,
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
n.o.s.,’’ to for consistency with the UN
Model Regulations, IMDG Code, and the
ICAO TI such that this entry is eligible
for the limited quantity exceptions.
• Revise the PG II HMT entry for
‘‘UN3085, Oxidizing solid, corrosive,
n.o.s.’’ for consistency with the UN
Model Regulations, IMDG Code and the
ICAO TI such that this entry is eligible
for the limited quantity exceptions.
• Revise the HMT entries for
‘‘Trinitrophenol (picric acid), wetted,
with not less than 10 percent water by
mass, UN3364’’ and ‘‘Trinitrophenol,
wetted with not less than 30 percent
water, by mass, UN1344’’ to harmonize
the HMR with the UN Model
Regulations, IMDG Code, and the ICAO
TI to clarify that the 500 gram limit per
package does not apply to UN1344 but
does apply to UN3364.
• Revise Special Provision 136,
assigned to the proper shipping name
‘‘UN3363, Dangerous goods in
machinery or apparatus,’’ in § 172.102
to include reference to Subpart G of Part
173.
• Remove reference to obsolete
Special Provision 18 for the HMT entry
‘‘UN1044, Fire extinguishers’’ and in
§ 180.209(j) and provide correct cross
reference to § 173.309.
• Correct a reference in § 172.201 to
exceptions for the requirement to
provide an emergency response
telephone number on a shipping paper.
• Revise §§ 172.301(f), 172.326(d) and
172.328(e) to include the clarification
that the NOT–ODORIZED or NON–
ODORIZED marking may appear on
packagings used for both unodorized
and odorized liquefied petroleum gas
(LPG), and remove the effective date of
October 1, 2006 or ‘‘after September 30,
2006,’’ if it appears in these paragraphs,
as the effective date has passed.
• Amend § 172.406(d) by clearly
authorizing the use of labels described
in Subpart E with a dotted or solid line
PO 00000
Frm 00003
Fmt 4701
Sfmt 4702
outer border on a surface background of
contrasting color.
• Update a mailing address in
§ 172.407(d)(4)(ii).
• Clarify the marking size
requirements for an intermediate bulk
container (IBC) that is labeled instead of
placarded by replacing the bulk package
marking reference in § 172.514(c) with
the non-bulk marking reference,
specifically, § 172.301(a)(1).
• Revise § 173.4a(a) to clarify that
articles (including aerosols) are not
eligible for excepted quantity
reclassification under § 173.4a, although
some are eligible to be shipped as small
quantities by highway and rail in
§ 173.4.
• Revise § 173.21(e) to prohibit
transportation or offering for
transportation materials in the same
transport vehicle (e.g., a trailer, a rail
car) with another material, that could
cause a dangerous evolution of heat,
flammable or poisonous gases or vapors,
or produce corrosive materials if mixed.
• Clarify that the requirements
provided in paragraph
§ 173.24a(c)(1)(iv) do not apply to
limited quantities packaged in
accordance with § 173.27(f)(2).
• Clarify the quantity limits for mixed
contents packages prepared in
accordance with § 173.27(f)(2).
• Clarify the requirements applicable
to bulk transportation of combustible
liquids by adding new subparagraph
§ 173.150(f)(3)(xi) stating that the
registration requirements in Subpart G
of Part 107 are applicable and revising
§§ 173.150(f)(3)(ix) and 173.150(f)(3)(x)
for punctuation applicable to a listing of
requirements.
• Add a new paragraph (j) in
§ 173.159 to allow shippers to prepare
for transport and offer into
transportation damaged wet electric
storage batteries.
E:\FR\FM\23JAP3.SGM
23JAP3
tkelley on DSK3SPTVN1PROD with PROPOSALS3
3790
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
• Revise § 173.166(e)(6) to add the
words ‘‘or cargo vessel.’’
• Revise §§ 173.170 and 173.171 by
changing the term motor vehicle to
transport vehicle to allow for motor
vehicles comprised of more than one
cargo-carrying body to carry 100 pounds
of black or smokeless powder reclassed
as Division 4.1 in each cargo-carrying
body instead of 100 pounds total in the
motor vehicle.
• Revise § 173.199(a)(4) by removing
the reference to the steel rod impact test
in § 178.609(h).
• Clarify the Packing Method table for
organic peroxide materials in § 173.225.
• Amend the bulk packaging section
reference in Column (8C) of the HMT
from § 173.240 to § 173.216 for the
entries ‘‘Asbestos, NA2212,’’ ‘‘Blue
asbestos (Crocidolite) or Brown asbestos
(amosite, mysorite) UN2212,’’ and
‘‘White asbestos (chrysotile, actinolite,
anthophyllite, tremolite), UN2590.’’ In
addition, we are proposing to revise
paragraph (c)(1) in § 173.216 by
authorizing the use of bulk packages
prescribed in § 173.240.
• Add a new paragraph (d)(5) to
§ 173.304a, a new paragraph (h) to
§ 173.314 and revise § 173.315(b)(1) to
require odorization of liquefied
petroleum gas when contained in
cylinders and rail cars.
• Amend § 173.306(k) to clarify that
aerosols shipped for recycling or
disposal by motor vehicle containing a
limited quantity are afforded the
applicable exceptions provided for
ORM–D materials granted under
§§ 173.306(i) and 173.156(b).
• Create a new paragraph (d) in
§ 175.1 stating that the HMR do not
apply to dedicated air ambulance,
firefighting, or search and rescue
operations.
• Correct § 175.8 by adding the
appropriate 14 CFR, Part 125 citations.
• Clarify exceptions for passengers,
crewmembers, and air operators in
paragraphs (a)(18), (a)(22), and (a)(24) of
§ 175.10 for the carriage of hazardous
materials aboard a passenger aircraft.
• Clarify § 175.75(e)(2) by replacing
the word ‘‘located’’ with ‘‘certificated.’’
• Clarify § 176.30(a)(4) by replacing
the word ‘‘packaging’’ with ‘‘package.’’
• Clarify that the loading restrictions
in § 177.835(c)(1) through (4) are
applicable to § 177.848(e).
• Revise § 178.65(i)(1) to correctly
reference the manufacturer’s report
requirements in § 178.35(g).
• Clarify § 178.337–17(a) to eliminate
confusion of the name plate and
specification plate requirements.
• Correct an editorial error in the
formula in § 178.345–3(c)(1).
• Include provisions consistent with
the non-bulk packaging and IBC
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
approval provisions for Large
Packagings in § 178.955.
• Clarify the requirements for Federal
Railroad Administration (FRA) approval
of tank car designs in § 179.13.
• Revise § 180.401 to replace the term
‘‘person’’ with ‘‘hazmat employee or
hazmat employer’’ to clarify that
Subpart E of Part 180 does not only
apply to persons offering or transporting
hazardous materials.
II. Incorporation by Reference
Discussion Under 1 CFR Part 51
The American Association of
Railroads (AAR) Manual of Standards
and Recommended Practices, Section
C–III, Specifications for Tank Cars,
Specification M–1002 and the
Compressed Gas Association (CGA)
pamphlet G–1.6, Standard for Mobile
Acetylene Trailer Systems, Seventh
Edition (G–1.6, 2011) are available for
interested parties to purchase in either
print or electronic versions through the
parent organization Web sites. The price
charged for these standards to interested
parties helps to cover the cost of
developing, maintaining, hosting, and
accessing these standards. The specific
standards are discussed in greater detail
in the following analysis.
III. Petitions for Rulemaking and
National Transportation Safety Board
Recommendations
A. Amendments to the HMR for Organic
Peroxides, Self-Reactive Substances and
Explosives (P–1590)
In P–1590, DGAC requests that
PHMSA amend the HMR by removing
the PG II designation in Column (5) of
the § 172.101 HMT for all organic
peroxides (Division 5.2), self-reactive
substances (Division 4.1), and
explosives (Class 1). DGAC states that
under both the HMR and international
regulations, organic peroxides, selfreactive substances and explosives are
not assigned a packing group. Despite
the absence of regulatory language for
determining a packing group assignment
for these materials, proper shipping
names for these materials listed in the
HMT are assigned a default PG II. DGAC
asserts that the presence of a PG
assignment for these entries is a
constant source of confusion which
leads to frustration of shipments. DGAC
further indicates that frustration
typically occurs when shipping papers
are inspected by carrier staff and
enforcement personnel along the
transport chain with respect to the
§ 172.202(a)(4) requirement to include
the ‘‘packing group in Roman numerals,
as designated for the hazardous material
in Column (5) of the § 172.101 table.’’
PO 00000
Frm 00004
Fmt 4701
Sfmt 4702
DGAC notes that while § 172.202(a)(4)
also excepts organic peroxides, selfreactive substances and explosives from
the requirement to provide a PG as part
of the required description, a great deal
of confusion is created given that,
irrespective of this exception, PGs are
provided for these materials in the
§ 172.101 HMT. DGAC also states that
the HMR are inconsistent with
international regulations as a PG is not
indicated for these materials in the
hazardous materials tables in the ICAO
TI, IMDG Code, and the UN Model
Regulations. In addition, those
regulations restrict the provision of a PG
in the transport document basic
description to materials where a PG has
been assigned in accordance with
classification requirements. With no PG
indicated for these substances in the
respective lists, it is inappropriate to
provide a PG in the hazardous materials
description on a shipping paper under
international regulations. Consequently,
provision of a PG for domestic
transportation would constitute a
violation of international regulations for
international transportation.
DGAC states that removing the PG for
these materials from the HMT would
impose no additional costs and would
result in a net savings since many
unnecessary delays in hazardous
material shipments would be avoided.
DGAC did not provide a specific figure
for the anticipated net savings.
DGAC also states that the packaging
provisions in Part 173 for these
materials indicate the level of
performance required. Therefore,
although certain packagings must meet
PG II performance levels, they do not
indicate a degree of danger or the
variation to PG I or PG III packagings.
In response to DGAC’s petition,
PHMSA agreed that it merited a
rulemaking change. We recognize that
when the PG does not relate to the
degree of hazard of the material based
on classification criteria but rather is
broadly assigned to an entire group of
materials for purposes of applying
regulatory requirements, there is limited
value in requiring an indication of the
PG on a shipping paper. Therefore
PHMSA is proposing to remove the PG
II designation from Column (5) of the
HMT for organic peroxides (Division
5.2), self-reactive substances (Division
4.1), and explosives (Class 1). PHMSA
seeks comment on the safety
implications of such a change as well as
the net benefit such a change (i.e.,
decrease in the number of frustrated
shipments) would provide.
E:\FR\FM\23JAP3.SGM
23JAP3
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
tkelley on DSK3SPTVN1PROD with PROPOSALS3
B. Marking Requirements for Poison by
Inhalation Materials (P–1591)
In P–1591, Air Products and
Chemicals, Inc., requests that PHMSA
amend the marking requirements for
poison inhalation hazard (PIH) materials
that are shipped in accordance with the
IMDG Code or TDG Regulations.
Specifically, the petitioner requests that
PHMSA modify §§ 171.23(b)(10)(iv)(A)
and 171.23(b)(10)(iv)(B) to remove the
phrase ‘‘regardless of the total quantity
contained in the transport vehicle or
freight container’’ in both paragraphs to
align Part 171, Subpart C requirements
for use of international regulations with
the poisonous hazardous material
marking requirements in § 172.313(c),
which offers exceptions based on
Hazard Zone, quantity, and number of
distinct materials.
Specifically, subpart C of Part 171
specifies requirements for shipments
offered for transportation or transported
in the United States under international
regulations. For PIH material,
subparagraphs (A) and (B) of
§ 171.23(b)(10)(iv) require that ‘‘the
transport vehicle or freight container
must be marked with the identification
numbers for the hazardous material,
regardless of the total quantity
contained in the transport vehicle or
freight container, in the manner
specified in § 172.313(c) of this
subchapter and placarded as required by
subpart F of part 172 of this
subchapter.’’ The petitioner states that
the phrase ‘‘regardless of the total
quantity contained in the transport
vehicle or freight container’’ gives the
appearance that the identification
number marking requirement is
applicable to any quantity. However, the
remainder of the sentence states that the
marking must be ‘‘in the manner
specified in in § 172.313(c) of this
subchapter,’’ which indicates an
entirely different requirement.
Section 172.313(c) specifies marking
requirements for non-bulk packages of
PIH material contained in transport
vehicles or freight containers subject to
certain provisions and limitations.
Section § 172.313(c)(2) states, ‘‘the
transport vehicle or freight container is
loaded at one facility with 1,000 kg
(2,205 pounds) or more aggregate gross
weight of the material in non-bulk
packages marked with the same proper
shipping name and identification
number’’ meaning that unless this
criteria is met, marking the
identification number on the transport
vehicle or freight container is not
required. The petitioner indicates the
inconsistency of §§ 171.23(b)(10)(iv)(A),
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
171.23(b)(10)(iv)(B) and 172.313(c) is a
source of confusion.
The petitioner also identifies a
potential discrepancy when transporting
internationally to or from the United
States in accordance with § 171.23. The
requirement to mark all quantities of
PIH material is more restrictive and
costly than the current marking
requirements for the same materials
when transported domestically under
the HMR in accordance with
§ 172.313(c). The petitioner points out
that under both the IMDG and TDG
there are no additional marking
requirements for transport units
carrying PIH materials in non-bulk
packages similar to the provisions found
in § 172.313(c). Therefore, for quantities
of PIH materials in non-bulk packages
(less than 1,000 kg per UN number) all
three regulations are not aligned.
The petitioner states they have had
numerous shipments of PIH materials
frustrated because of this confusing
requirement, and that the additional
marking causes economic hardship and
transit delays due to additional labor
necessary to apply the extra UN
identification numbers at the port. The
petitioner did not provide a specific cost
figure for these frustrated shipments or
anticipated net savings of a regulatory
change.
In response to Air Products’ petition,
PHMSA agreed that it merited a
rulemaking change. The intent of the
requirements in § 171.23(b)(10)(iv) is to
provide hazard communication for
international shipments of PIH materials
transiting the United States under either
the IMDG Code or TDG equivalent to
those established in the HMR, not to
impose more restrictive requirements.
The removal of the phrase referring to
a ‘‘total quantity’’ will reduce potential
confusion due to differences in
inspection interpretations and will
reduce handling costs and transit time
while maintaining an acceptable level of
hazard communication for PIH
materials. Therefore, PHMSA is
proposing to amend
§§ 171.23(b)(10)(iv)(A) and
171.23(b)(10)(iv)(B) by removing the
phrase ‘‘regardless of the total quantity
contained in the transport vehicle or
freight container’’ from each
subparagraph. PHMSA seeks comment
on the safety implications of such a
change as well as the net benefit such
a change (i.e., decrease in the number of
frustrated shipments) would provide.
C. Emergency Response Telephone
Number (P–1597)
In P–1597, DGAC requests that
PHMSA amend the emergency response
telephone number requirements to
PO 00000
Frm 00005
Fmt 4701
Sfmt 4702
3791
prohibit the use of alphanumeric
telephone numbers and only permit
numeric telephone numbers. Currently,
the HMR do not limit the telephone
numbers to be numeric under
§ 172.604(a). DGAC states that
historically telephone faces associated
integers with letters (e.g., 2ABC), but this
is no longer the case in all instances of
phones. As a result, emergency response
telephone numbers presented
alphanumerically could cause delays in
acquiring emergency response
information as the first responder would
have to first convert letters to numbers.
These delays are undesirable in time
sensitive emergency response situations.
DGAC further points out that PHMSA
issued a letter of interpretation (Ref. No.
04–0032) confirming that alphanumeric
presentation of an emergency response
telephone number was acceptable but
expressed concern in the delays it may
cause.
In response to DGAC’s petition,
PHMSA agreed that it merited a
rulemaking change. We agree that the
continued use of alphanumeric
telephone numbers could cause
unnecessary delays in emergency
response situations, therefore, PHMSA
is proposing to revise § 172.604(a) to
require a numeric format for the
presentation of emergency response
telephone numbers in association with
a shipping paper. Additionally, we
request specific comment on the cost
implications of this proposed revision.
D. Packaging Requirements for Nitric
Acid (P–1601)
In P–1601, the United Parcel Service
(UPS) requests that PHMSA revise the
packaging requirements for ground
shipments of nitric acid. Its petition was
based on four loading and sorting
operation incidents which occurred
over a six-month period. The incidents
did not result in any casualties, but
varying degrees of property damage
were assessed in each situation. UPS
notes that each incident involved the
same packaging configuration—glass
inner packagings within fiberboard
outer packagings. In each case, a breach
of one or more inner packagings caused
leakage, resulting in fumes, followed by
the initiation of a fire involving the
fiberboard outer packaging material.
UPS believes that the packaging
requirements of the HMR applicable to
ground shipments of nitric acid do not
adequately address the hazards present.
As provided in § 173.158, packaging
for ground shipments of nitric acid
prescribe either outer packaging that is
not reactive to contents, or a
combination packaging that includes
non-reactive intermediate packaging
E:\FR\FM\23JAP3.SGM
23JAP3
3792
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
tkelley on DSK3SPTVN1PROD with PROPOSALS3
and absorbent material. However, for
concentrations of less than 90% nitric
acid, the HMR permit the use of glass
inner packagings of less than 2.5 L
placed inside UN Specification 4G, 4C1,
4C2, 4D or 4F outer packagings. This
latter configuration is associated with
the four incidents referenced by UPS in
its petition for rulemaking.
UPS proposes that PHMSA change
§ 173.158(e) to enhance the packaging
requirements applicable to nitric acid in
concentrations less than 90%. Under the
proposal in P–1601, when in wooden or
fiberboard outer packaging, glass inner
packagings used in the configuration
prescribed in § 173.158(e) would be
required to be packed in tightly-closed,
non-reactive intermediate packagings
and cushioned with a non-reactive
absorbent material. UPS feels that the
addition of this intermediate packaging
would properly address the hazards
present in this concentration of nitric
acid and would have prevented the
above incidents from occurring.
The UPS petition identified an
increase in the number of fires caused
by spilled nitric acid reacting with
fiberboard packaging. In this NPRM,
PHMSA is considering a performance
standard for packaging and handling the
product that would prevent breakages
and spills involving nitric acid. Based
on the number of incidents noted in the
petition for rulemaking and the cost
incurred, in response to UPS’s petition,
PHMSA agreed that it merited
consideration of a rulemaking change.
Therefore, PHMSA is proposing to
require in § 173.158(e) that when nitric
acid, in concentrations less than 90%, is
placed in glass inner packagings to be
packaged in wooden or fiberboard outer
packaging, the glass inner packagings
must be packed in tightly-closed, nonreactive intermediate packagings and
cushioned with a non-reactive absorbent
material. PHMSA is seeking comment
on whether or not this proposed
packaging should be applied to other
similar materials as well as cost burdens
from the increase in packaging
requirements.
E. Pressure Test and Internal Visual
Inspection Requirements for MC 331
Cargo Tanks (P–1604)
In P–1604, the National Propane Gas
Association (NPGA) requests PHMSA
modify the pressure test and visual
inspection test requirements applicable
to certain MC 331 specification cargo
tanks in dedicated propane delivery
service, commonly known as bobtails,
found in § 180.407(c) . Currently, the
HMR require periodic pressure testing
and visual inspection every five years to
remain in service. NPGA petitions
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PHMSA to extend the requalification
period for certain MC 331 cargo tanks
from five years to ten years and provides
a technical case for this change.
NPGA states in its petition that the
five-year requalification period for
bobtails is a burden to the propane
industry. It states that these cargo tanks
must be taken out of service for a period
of up to a week and that water is
introduced into the tank during the
requalification process, which can be
detrimental to the tank and product
contained in the tank. Before a tank can
be returned to service, it must be
completely free of any water. NPGA
states that this removal from service
hinders a propane company’s
operations.
In 2001, NPGA conducted a survey to
determine whether companies that
performed the five-year hydrostatic test
requirement had experienced any
failures. None of the 203 survey
respondents reported a hydrotest failure
for tanks of less than 3,500 gallons water
capacity. Based on the results of this
survey, the NPGA sponsored a study by
a non-profit research and development
organization (the Battelle Memorial
Institute) to determine whether a change
to the requalification period would be
technically feasible. Battelle developed
crack growth models to estimate the
time to failure of a tank that has
undergone several pressure cycles. They
also analyzed effects on the MC 331
cargo tank under the delivery service
load conditions to determine the
estimated life of the tank.
Based on the results of this study, the
NPGA and Battelle recommend that
PHMSA modify the requalification
period from five years to ten years for
MC 331 cargo tanks that: (1) Are used
in dedicated propane service; (2) have a
water capacity less than 3,500 gallons;
and (3) are constructed of: nonquenched and tempered (NQT) SA–612
steel and NQT SA–202 or SA–455
steels, provided the materials have fullsize equivalent (FSE) Charpy-V notch
energy test data that demonstrates 75%
shear-area ductility at 32 °F with an
average of three or more samples greater
than 15 ft-lb FSE, and with none less
than 10 ft-lb FSE. A copy of this study
is in the docket for this rulemaking.
After considering the NPGA survey
results, which cite no reported
incidents, and the study commissioned
by the NPGA, PHMSA determined that
the petition merited consideration of a
rulemaking change. NPGA notes there is
a strong safety record amongst its
members regarding this issue and the
cost savings to the industry would be
significant (a specific benefit was not
provided by the NPGA). Therefore,
PO 00000
Frm 00006
Fmt 4701
Sfmt 4702
PHMSA is proposing to revise the
pressure test and internal visual
inspection requirements found in
§ 180.407(c) for certain MC 331
Specification cargo tanks from a fiveyear requalification period to a ten-year
period. PHMSA seeks comment on the
safety implications of such a change as
well as the net benefit such a change
(i.e., decrease in time out of service)
would provide.
F. Mobile Acetylene Trailer Systems (P–
1605) and NTSB Safety
Recommendations H–09–01 and H–09–
02
In P–1605, the CGA requests that
PHMSA amend the HMR to incorporate
a reference to CGA pamphlet G–1.6,
Standard for Mobile Acetylene Trailer
Systems, Seventh Edition (G–1.6, 2011).
This standard provides minimum
requirements necessary for the design,
construction, and operation of mobile
acetylene trailer systems, which consist
of acetylene cylinders mounted and
manifolded for the purposes of charging,
transporting, and discharging acetylene.
It also covers ground-mounted auxiliary
equipment used with mobile acetylene
trailers such as piping, meters,
regulators, flash arrestors, and fire
protection equipment.
This petition coincides with two
NTSB recommendations (H–09–01 and
H–09–02) issued to PHMSA based on
incidents involving mobile acetylene
trailers.1 In response to CGA’s petition
and its appropriateness to addressing
the NTSB recommendations, PHMSA
determined that it warranted
consideration of a rulemaking change.
Further detailed discussion of this issue
can be found in the Section-by-Section
review for § 173.301.
G. Pressure Relief Devices for Cargo
Tanks (P–1609)
In P–1609, the Truck Trailer
Manufacturers Association (TTMA)
requests that PHMSA amend the
§ 180.407 requirements applicable to
pressure relief devices (PRDs).
Specifically, TTMA requests that
PHMSA revise the HMR to more clearly
establish the set pressure of a PRD for
each of the DOT specification cargo tank
motor vehicles. TTMA states that the
wording of §§ 180.407(d)(3) and
180.407(g)(1)(ii), applicable to the
testing requirements for PRDs, creates
issues for persons performing the testing
of a PRD.
TTMA points out two specific issues
with these paragraphs. The first is the
1 https://phmsa.dot.gov/staticfiles/PHMSA/
DownloadableFiles/Files/NTSB%20Files/H_09_1_
2_Original.pdf.
E:\FR\FM\23JAP3.SGM
23JAP3
tkelley on DSK3SPTVN1PROD with PROPOSALS3
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
term ‘‘set-to-discharge.’’ On April 9,
2009 PHMSA published a final rule
(Docket No. PHMSA–2006–25910 (HM–
218E); 74 FR 16135; effective May 11,
2009), where in an attempt to harmonize
with international standards, PHMSA
removed the phrase ‘‘set-to-discharge,’’
and ‘‘start-to-discharge’’ was substituted
in its place. TTMA explains that this is
an issue because the discharge pressure
referenced is used to figure the
minimum pressure at which the PRD
should reseat. By changing the wording
from ‘‘set’’ to ‘‘start,’’ the reseating
pressure changed from a design
requirement, to one based on what a
given vent actually does under test.
Therefore, instead of testing a PRD
knowing its reseating requirements,
testers must perform the test of a given
PRD and calculate the reseating pressure
of that particular PRD and retest from
that pressure. Essentially, testers of
PRDs could test identical products at
different pressures because the reseat
pressure is no longer a fixed design
requirement. This creates
inconsistencies between the reseating
pressures of comparable PRDs
authorized for identical hazardous
materials service. TTMA states that this
compromises safety, instead of
promoting it.
The second issue TTMA points out in
its petition is in regards to the term ‘‘the
required set pressure.’’ This term is
problematic in relation to the
continuing operation of existing cargo
tanks made to older specifications in
§ 180.405(c). As the codes for the older
specifications of cargo tanks are no
longer published, determining ‘‘the
required set pressure’’ is problematic.
This is an issue for current
specifications of cargo tanks as well.
There are pressure allowances during
the retesting of pressure relief devices of
no more than 110% of the required set
pressure (§ 180.407(d)(3)) and the same
10% allowance for DOT 400 series cargo
tanks (§ 178.345–10(d)) creates
confusion for current specification cargo
tanks. TTMA believes this will create an
unsafe condition for tanks, as a PRD is
no longer functioning as designed by the
manufacturer. The PRD may actually
open at higher pressures (near a cargo
tank’s test pressure) as opposed to the
appropriate lower design pressure.
TTMA petitions that PHMSA revise
the HMR for testing of PRDs by
replacing the current requirements
found in §§ 180.407(d)(3) and
180.407(g)(1)(ii) with a reference to a
new paragraph, § 180.407(j) which
would detail the PRD test requirements.
TTMA believes this change will
eliminate confusion for testers by
clarifying the requirements for opening
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
and reseating pressures when beginning
the tests. This will also enhance the
enforcement of these requirements by
creating consistency in the testing
requirements for cargo tank PRDs of the
same design.
PHMSA determined that TTMA’s
petition merited consideration of a
rulemaking change based on the need
for consistent and clear testing
requirements for PRDs on DOT
specification cargo tanks. Therefore,
PHMSA is revising §§ 180.407(d)(3) and
180.407(g)(1) to reference a new section
§ 180.407(j), which will outline the
testing requirements applicable to PRDs.
IV. Section-by-Section Review
Part 107
Section 107.402
This section sets forth the application
requirements for designation as a
certification agency to issue certificates
and certifications for packagings
designed, manufactured, tested, or
maintained in conformance with the
HMR and standards set forth in the UN
Model Regulations. This section also
sets forth the application requirements
for designation as a certification agency
to issue certificates and certifications for
lighters, portable tanks, multi-element
gas containers, and Division 1.4G
consumer fireworks.
PHMSA is proposing to revise
§ 107.402(d)(1)(i) to indicate that a
fireworks certification agency applicant
must be a U.S. resident, or for a nonU.S. resident, must have a designated
U.S. agent representative as specified in
§ 105.40. The criteria for fireworks
certification agencies were added to the
HMR in Docket No. PHMSA–2010–0320
(78 FR 42457) (HM–257). PHMSA
intended for § 107.402(d)(1)(i) to
correspond with the requirements of
§ 105.40, which specifies designated
agents for non-residents; however, the
term ‘‘citizen’’ was inadvertently
substituted for ‘‘resident.’’ PHMSA is
proposing to revise § 107.402(d)(1)(i) by
replacing the term ‘‘citizen’’ with the
term ‘‘resident.’’
PHMSA is also proposing to revise
§ 107.402(e) to require that a lighter
certification agency submit a statement
to the Associate Administrator that the
agency is independent of and not owned
by a lighter manufacturer, distributor,
import or export company, or
proprietorship. Further, we propose to
revise § 107.402(f) to require that a
portable tank and MEGC certification
agency submit a statement to the
Associate Administrator indicating that
the agency is independent of and not
owned by a portable tank or MEGC
manufacturer, owner, or distributor.
PO 00000
Frm 00007
Fmt 4701
Sfmt 4702
3793
This language was included in § 107.402
and pertained to all certification
agencies, but was removed
inadvertently as a result of changes
made to the HMR in Docket No.
PHMSA–2010–0320 (78 FR 42457)
(HM–257).
Section 107.807
This section sets forth the
requirements for authorizing chemical
analyses and tests for non-domestic
manufacturers of DOT specification or
special permit cylinders. To maintain
consistency with requirements of other
independent inspection agencies,
PHMSA is proposing to revise § 107.807
to require that the agency submit a
statement indicating that the inspection
agency is independent of and not owned
by a cylinder manufacturer, owner, or
distributor.
Part 171
Section 171.7
The National Technology Transfer
and Advancement Act of 1995 (15
U.S.C. 272) directs agencies to use
voluntary consensus standards in lieu of
government-unique standards except
where inconsistent with law or
otherwise impractical. Section 171.7
lists all standards incorporated by
reference into the HMR and
informational materials not requiring
incorporation by reference. The
informational materials not requiring
incorporation by reference are noted
throughout the HMR and provide best
practices and additional safety measures
that while not mandatory, may enhance
safety and compliance. Table 1 to
§ 171.7 lists informational materials that
are not incorporated by reference. In a
final rule published on January 28, 2008
(Docket No. 05–21812 (HM–218D); 73
FR 4699, effective October 1, 2008),
PHMSA added in Table 1 (formerly
paragraph (b) of the section) an entry for
the Compressed Gas Association (CGA)
publication, CGA C–1.1, Personnel
Training and Certification Guidelines
for Cylinder Requalification by the
Volumetric Expansion Method.
Following the publication of the final
rule (HM–218D), PHMSA received an
appeal from Hydro-Test Products, Inc.
(PHMSA–2005 21812–0025) asking us
to either remove the reference to CGA
C–1.1 or add examples of other training
materials that may be used. Hydro-Test
noted that referencing only the CGA
publication in the HMR could suggest
that other training materials are not
acceptable. PHMSA added CGA C–1.1
as an example of guidance material that
may be used to assist requalifiers in
creating their cylinder training
E:\FR\FM\23JAP3.SGM
23JAP3
tkelley on DSK3SPTVN1PROD with PROPOSALS3
3794
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
procedures and recordkeeping
requirements. The publication is not a
standalone tool for training persons on
how to perform requalification of
cylinders using the volumetric
expansion test method. To alleviate
confusion for cylinder requalifiers,
PHMSA intended to remove the
reference to CGA C–1.1 in §§ 171.7 and
180.205 in a previous editorial final rule
published on October 1, 2008 (Docket
No. PHMSA–2008–0227 (HM–244A); 73
FR 57001, effective October 1, 2008).
However, PHMSA removed reference to
the document only in § 180.205(g)(6)
and inadvertently failed to remove the
reference in § 171.7. PHMSA is
proposing to amend Table 1 to § 171.7
to remove the entry for CGA C–1.1 to
align the regulatory text with previous
rulemaking actions.
Additionally, § 171.7 incorporates by
reference the American Association of
Railroad’s (AAR’s) Manual of Standards
and Recommended Practices, Section
C–III, Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), October
2000 edition for various tank car design,
manufacture, inspection and testing,
and qualification regulations set forth in
Parts 173, 179, and 180 of the HMR. As
currently incorporated by reference, all
sections refer to the October 2000
edition of this document.
AAR frequently updates the AAR
Specifications for Tank Cars. While the
AAR updates this document, PHMSA
has not received a petition for
rulemaking to revise the HMR to reflect
more current versions of the AAR
Specifications for Tank Cars.
In this proposed rule, we are
proposing to update the incorporation
by reference for this document to
include revisions published by the AAR
in the 2007 edition of the AAR
Specifications for Tank Cars and certain
subsequent amendments. PHMSA is
also proposing to revise § 179.24(a)(2) to
remove the reference to the December
2000 edition of this document and
instead replace it with a generic
reference to the AAR Specifications for
Tank Cars. Additionally, we are
proposing to revise § 180.503 to replace
the reference to the ‘‘AAR Tank Car
Manual’’ with ‘‘AAR Specifications for
Tank Cars’’ for consistency with
references to this document elsewhere
in the HMR. The FRA reviewed the
2007 standard and the subsequent
amendments and determined not to
incorporate the 2007 standard in its
totality. Under this proposed rule, each
chapter and appendix of the AAR
Specifications for Tank Cars will be
listed in § 171.7 with an effective date
to account for the most recent AAR
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
amendments supported by FRA. In
cases where FRA does not support
amendments made to the AAR
Specifications for Tank Cars due to
safety concerns a prior effective date for
that specific chapter or appendix will be
referenced, and in some cases, specific
sections of the chapter or appendix will
be specifically not included. Upon
adoption into the HMR, entities subject
to compliance with the HMR must
comply with the version of the chapters
and appendices referred to in § 171.7
and effective on the date specified
therein. AAR publications such as this
are available through the AAR as a
benefit of membership. We anticipate
that affected entities already have access
to the AAR Specifications for Tank Cars
we are proposing to incorporate. Other
interested parties may purchase these
standards from the AAR for $390.00.
Moving forward, FRA will continue to
evaluate amendments made to the AAR
Specifications for Tank Cars and will
update the effective dates for referenced
chapters or appendices of the tank car
manual, as appropriate, when such
amendments are supported by FRA.
Lastly, as described in Section IIF for
petition for rulemaking P–1605 and
further discussed in the Section-bySection review for § 173.30, PHMSA
proposes to amend the HMR to
incorporate a reference to CGA
pamphlet G–1.6, Standard for Mobile
Acetylene Trailer Systems, Seventh
Edition (G–1.6, 2011). Interested parties
may purchase a copy of this standard
from the CGA starting at $37.00.
Section 171.22
In a May 3, 2007 final rule (Docket
No. PHMSA–2005–23141 (HM–215F);
72 FR 25162), the importer
responsibility requirements were
transitioned from § 171.12(a) to
§ 171.22. When transitioning the
requirement that a person importing a
hazardous material into the United
States must provide the shipper and
forwarding agent with information
required under the HMR, the shipper
notification was inadvertently omitted.
As a result, only the forwarding agent is
presently required to be provided with
information as to the requirements of
the HMR applicable to the particular
shipment. In this NPRM, PHMSA is
proposing to reinstate text in § 171.22(f)
that was inadvertently removed during
the transition by requiring both the
foreign shipper and forwarding agent at
the place of entry to be provided with
the requirements of the HMR applicable
to the particular shipment.
PO 00000
Frm 00008
Fmt 4701
Sfmt 4702
Part 172
Section 172.101
This section contains the HMT and
explanatory text for each of the columns
in the table. In this NPRM, PHMSA is
proposing a number of revisions to the
§ 172.101 HMT, including the special
provisions listed in Column (7) of the
table and specified in § 172.102, to
clarify the regulations and correct
inadvertent errors. Proposed changes to
the § 172.101 HMT will appear as an
‘‘add,’’ ‘‘remove,’’ or ‘‘revise,’’ and
include changes to the following table
entries: ‘‘Calcium nitrate, UN1454,’’
‘‘Corrosive liquids, flammable, n.o.s.,
UN2920,’’ ‘‘Fire extinguishers,
UN1044,’’ ‘‘Oxidizing solid, corrosive,
n.o.s., UN3085,’’ ‘‘Propellant solid,
UN0501,’’ ‘‘Trinitrophenol (picric acid),
wetted, with not less than 10 percent
water by mass, UN3364,’’ and
‘‘Trinitrophenol, wetted with not less
than 30 percent water, by mass,
UN1344.’’
The entry for ‘‘Calcium nitrate,
UN1454’’ is being revised to reflect a
change that was intended to be made
when PHMSA published a final rule on
January 7, 2013 (Docket No. PHMSA–
2012–0027 (HM–215L); 78 FR 987).
Special Provision B120 was
inadvertently not assigned to the entry
for ‘‘Calcium nitrate, UN1454’’ when
several HMT other entries were revised
to include Special Provision B120.
Special Provision B120 indicates that
the material, when offered in
conformance with the applicable
requirements of Part 178 and general
packaging requirements in Part 173,
may be offered for transportation in a
flexible bulk container. PHMSA is
proposing to revise the HMT to add
Special Provision B120 to Column (7)
for the entry ‘‘Calcium nitrate,
UN1454.’’
The entry for ‘‘Corrosive liquids,
flammable, n.o.s., UN2920’’ is being
revised to harmonize the HMR with the
UN Model Regulations, IMDG Code, and
the ICAO TI. The UN Model
Regulations, IMDG Code, and ICAO TI
provide limited quantity exceptions for
the PG II entry. Therefore, PHMSA is
proposing to revise the entry for
‘‘Corrosive liquids, flammable, n.o.s.,
UN2920, PG II’’ to remove the word
‘‘None’’ from Column (8A) of the HMT
and add ‘‘154.’’ This change will be
consistent with similar PG II materials
that are also provided the limited
quantity exception.
The entry for ‘‘Fire extinguishers,
UN1044’’ is being revised to eliminate
reference to a Special Provision 18
which is no longer in the HMR. Special
Provision 18 was removed from
E:\FR\FM\23JAP3.SGM
23JAP3
tkelley on DSK3SPTVN1PROD with PROPOSALS3
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
§ 172.102(c)(1) in a January 7, 2013 final
rule (Docket No. PHMSA–2009–0126
(HM–215K); 78 FR 1101) and combined
into revised § 173.309(a). We did not
make a conforming amendment to
remove Special Provision 18 from this
entry in the HMT, thus, in this NPRM,
we are proposing to revise the entry for
‘‘Fire extinguishers, UN1044’’ by
deleting the special provision.
The entry for ‘‘Oxidizing solid,
corrosive, n.o.s., UN3085’’ is being
revised to harmonize with the UN
Model Regulations, IMDG Code, and the
ICAO TI. The UN Model Regulations,
IMDG Code, and ICAO TI provide
limited quantity exceptions for the PG II
entry. Therefore, PHMSA is proposing
to revise the entry for ‘‘Oxidizing solid,
corrosive, n.o.s., UN3085, PG II’’ to
remove the word ‘‘None’’ from Column
(8A) of the HMT and add ‘‘152.’’
The entry for ‘‘Propellant, solid,
UN0501’ is being revised to eliminate a
reference to a requirement that is no
longer is in the HMR. Column (10B) of
this entry lists vessel stowage provision
24E. Vessel stowage provision 24E was
removed from § 176.84(c)(2) when the
Research and Special Programs
Administration (RSPA), PHMSA’s
predecessor, published a final rule on
June 21, 2001 (Docket No. RSPA–2000–
7702 (HM–215D); 66 FR 33316, effective
October 1, 2001) that revised the table
of provisions applicable to vessel
transportation of Class 1 (explosive)
materials. As this provision is no longer
in the HMR, PHMSA is proposing to
revise the entry for ‘‘Propellant, solid,
UN0501’’ to remove vessel stowage
provision 24E from Column (10B) of the
HMT.
The HMT entries for ‘‘Trinitrophenol
(picric acid), wetted, with not less than
10 percent water by mass, UN3364’’ and
‘‘Trinitrophenol, wetted with not less
than 30 percent water, by mass,
UN1344,’’ are being revised to
harmonize the HMR with the UN Model
Regulations, IMDG Code, and the ICAO
TI. Presently, Special Provision 162 is
applied to UN3364 (not less than 10
percent water) and Special Provision 23
is applied to UN1344 (not less than 30
percent water). Special Provision 162
outlines a provision for transport of the
material as a Division 4.1. The material
must be packed such that at no time
during transport will the percentage of
diluent fall below the percentage that is
stated in the shipping description.
Special Provision 23 is similar in that it
also outlines this provision but includes
an additional condition that quantities
of not more than 500 grams per package
with not less than 10 percent water by
mass may also be classed in Division
4.1, provided a negative test result is
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
obtained when tested in accordance
with test series 6(c) of the UN Manual
of Tests and Criteria.
The special provisions are assigned in
the reverse manner to the trinitrophenol
entries in the UN Model Regulations,
IMDG Code, and the ICAO TI. Special
Provision 23 is applied to UN3364 with
the lower minimum diluent percent of
water while the 500 gram limit per
package for 10% diluent does not apply
to UN1344 with the larger minimum
diluent percentage of water (i.e., 30%).
Thus the special provision was
inadvertently incorrectly assigned in the
HMR. For the entry ‘‘Trinitrophenol
(picric acid), wetted, with not less than
10 percent water by mass, UN3364,’’ we
propose to replace Special Provision
162 in Column (7) of the HMT with
Special Provision 23. Conversely, for the
entry ‘‘Trinitrophenol, wetted, with not
less than 30 percent water, by mass,
UN1344,’’ we propose to replace Special
Provision 23 from Column (7) of the
HMT with Special Provision 162.
Section 172.102
This section outlines special
provisions that are listed in Column (7)
of the § 172.101 HMT. Special Provision
136 is listed for the entry ‘‘Dangerous
Goods in Machinery or Dangerous
Goods in Apparatus, UN3363.’’ PHMSA
received a request for a letter of
interpretation (Ref. No. 12–0037) which
sought confirmation that a material
classified as a Class 2 gas that has
packaging exceptions listed in Column
(8A) of the HMT may be described as
‘‘Dangerous Goods in Apparatus,
UN3363.’’ The requestor pointed out
that the provisions in Special Provision
136 are inconsistent. Special Provision
136 states that except when approved by
the Associate Administrator, machinery
or apparatus may only contain
hazardous materials for which
exceptions are referenced in Column (8)
of the HMT and are provided in Part
173, Subpart D of Subchapter C. Subpart
D of Part 173 contains the definitions,
classification, packing group
assignments and exceptions for
hazardous materials other than Class 1
and Class 7. However, preparation,
packaging and exceptions for Class 2
gases are located in Subpart G of Part
173. This should be indicated in Special
Provision 136 to eliminate confusion
that gases prepared in accordance with
Subpart G of Part 173 would not be
eligible to be described as ‘‘Dangerous
Goods in Apparatus, UN3363.’’ It was
not PHMSA’s intention to exclude Class
2 gases from using this proper shipping
name, therefore, PHMSA is proposing to
revise Special Provision 136 in
PO 00000
Frm 00009
Fmt 4701
Sfmt 4702
3795
§ 172.102 to include reference to subpart
G of part 173.
Section 172.201
This section prescribes the
requirements for the preparation and
retention of shipping papers. Paragraph
(d) of this section states the
requirements for shipping papers to
contain an emergency response
telephone number. This paragraph
states that except as provided in
§ 172.604(c), a shipping paper must
contain an emergency response
telephone number. The reference in this
paragraph to § 172.604(c) is inaccurate.
The requirements in § 172.604
applicable to emergency response
telephone numbers were changed when
PHMSA published a final rule on
October 19, 2009 (Docket No. PHMSA–
2006–26322 (HM–206F); 74 FR 53413,
effective November 18, 2009). This
rulemaking action moved the exceptions
to the requirement to provide an
emergency response telephone number
to a new paragraph (d). PHMSA is
proposing a conforming revision to
§ 172.201(d) to accurately reference the
exception from the emergency response
telephone number requirement found in
§ 172.604(d).
Sections 172.301, 172.326, 172.328, and
172.330
These sections prescribe marking
requirements for non-bulk packagings,
portable tanks, cargo tanks, tank cars
and multi-unit tank car tanks. Each of
these sections contains a paragraph
(§§ 172.301(f), 172.326(d), 172.328(e),
and 172.330(c)) prescribing
requirements for legible marking of
packages containing unodorized LPG
with NON-ODORIZED or NOTODORIZED. PHMSA received a request
for a letter of interpretation (Ref. No.
06–0235) requesting clarification that
the NON-ODORIZED or NOTODORIZED mark may also appear on a
package containing odorized LPG. In the
letter, we noted that PHMSA addressed
this issue in part in a final rule
published by its predecessor agency,
RSPA, on November 4, 2004 (RSPA–03–
15327 (HM–206B); 69 FR 64462,
effective October 1, 2006). Final rule
HM–206B changed the hazard
communication requirements applicable
to certain packages containing
unodorized LPG, including the
requirement to mark with NONODORIZED or NOT-ODORIZED.
Specifically, it also clarified that the
NON-ODORIZED or NOT-ODORIZED
marking may appear on a tank car or
multi-unit tank car tanks used for both
unodorized and odorized LPG. This was
implemented to address the concerns
E:\FR\FM\23JAP3.SGM
23JAP3
3796
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
expressed by a commenter to the rule
about the logistics of tracking,
inspecting, and stenciling tank cars to
ensure proper marking. However, this
clarification was not extended to
cylinders, cargo tanks and portable
tanks containing LPG in that final rule.
We further noted in the response letter
that we intended to revisit this issue in
a future rulemaking to extend this
clarification to other packaging types
that are filled with unodorized or
odorized LPG.
We see no compelling argument not to
extend this allowance further to other
packaging types, thus, PHMSA is
proposing to revise §§ 172.301(f),
172.326(d) and 172.328(e) to include the
clarification that the marking may
appear on these packagings used for
both unodorized and odorized LPG, and
remove the effective date of October 1,
2006 that appears in these paragraphs,
as the effective date has long passed.
PHMSA is also removing the effective
date referenced in paragraph
§ 172.330(c).
tkelley on DSK3SPTVN1PROD with PROPOSALS3
Section 172.406
This section specifies the placement
of labels on a package. Paragraph (d) of
this section prescribes requirements that
labels be printed or affixed to a
background of contrasting color, or must
have a dotted or solid line outer border.
Further, § 172.407(b)(2) provides that
the dotted line border on each label
shown in §§ 172.411 through 172.448 is
not part of the label specification,
except when used as an alternative for
the solid line outer border to meet the
requirements of § 172.406(d). Based on
this language, it appears that labels with
a dotted or solid line outer border are
permitted only if the surface of the
package is not a contrasting color.
In this rulemaking, we are proposing
to amend § 172.406(d) by expressly
authorizing the use of labels described
in Part 172, Subpart E with a dotted or
solid line outer border on a surface
background of contrasting color. There
is no reduction in hazard
communication and this revision will
provide cost savings to shippers by
eliminating the need to acquire and
store two types of labels (one with a
border and the other without)
depending on the surface color of the
package.
Section 172.407
This section contains label
specifications. Paragraph (d) of this
section contains color specifications for
labels including a requirement for color
tolerances according to color charts
referenced in Appendix A to Part 172 of
the HMR. Paragraph (d)(4)(ii) states that
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
the color charts are on display at the
Office of Hazardous Materials Safety,
Office of Hazardous Materials
Standards, Room 8422, Nassif Building,
400 Seventh Street SW., Washington,
DC 20590–0001. This address does not
reflect the current address of the Office.
PHMSA is amending the address in
§ 172.407(d)(4)(ii) to read Standards and
Rulemaking Division, Pipeline and
Hazardous Materials Safety
Administration, U.S. Department of
Transportation, East Building, 1200
New Jersey Avenue SE., Washington,
DC 20590–0001.
Section 172.514
This section prescribes the placarding
requirements and exceptions for a bulk
packaging containing a hazardous
material. In paragraph (c)(4), an
exception is provided for an IBC that is
labeled in accordance with Part 172,
Subpart E instead of placarded. IBCs
that are labeled instead of placarded are
authorized to display the proper
shipping name and UN identification
number in accordance with the bulk
package marking size requirements of
§ 172.302(b)(2) in place of the UN
number on an orange panel, placard or
white square-on-point. Section
172.302(b)(2) requires that for IBCs,
markings have a width of at least 4.0
mm (0.16 inch) and a height of at least
25 mm (one inch). This is inconsistent
with the UN Model Regulations, IMDG
Code, and ICAO TI that all require a
height of 12 mm (0.47 inch). The
international size requirement is
equivalent to the non-bulk marking size
requirement provided in § 172.301(a)(1).
In addition, the reference to the bulk
packaging marking requirements of
§ 172.302(b)(2) in § 172.514(c)(4)
conflicts with § 172.336(d)
identification number marking
requirements which states ‘‘[w]hen a
bulk packaging is labeled instead of
placarded in accordance with
§ 172.514(c) of this subchapter,
identification number markings may be
displayed on the package in accordance
with the marking requirements of
§ 172.301(a)(1) of this subchapter.’’
In this rulemaking, we are proposing
to clarify that the marking size
requirement, for both the proper
shipping name and identification
number, is at least 12 mm (0.47 inch) for
an IBC that is labeled instead of
placarded. PHMSA proposes replacing
the bulk package marking reference in
§ 172.514(c) with the non-bulk marking
reference, specifically, § 172.301(a)(1).
The reduced minimum marking size
will alleviate the existing discrepancy
between § 172.514(c)(4) and
§ 172.336(d) and decrease frustration of
PO 00000
Frm 00010
Fmt 4701
Sfmt 4702
shipments by harmonizing with
international regulations thus ensuring
IBC’s marked in accordance with these
regulations are consistent with the
HMR.
Part 173
Section 173.4a
This section prescribes the
requirements for excepted quantities of
hazardous materials. The excepted
quantities provisions were added to the
HMR when PHMSA published a final
rule on January 14, 2009 (Docket Nos.
PHMSA–2007–0065 (HM–224D) and
PHMSA–2008–0005 (HM–215J); 74 FR
2254, effective February 13, 2009) in an
effort to harmonize with international
standards. Excepted quantities
provisions in § 173.4a are intended to be
consistent with the existing exception in
the ICAO TI. Paragraph (a) reads
‘‘[e]xcepted quantities of materials other
than articles transported in accordance
with this section are not subject to any
additional requirements of this
subchapter except for . . .’’ This
language is unclear as to whether
articles (including aerosols) may use the
excepted quantities provisions. PHMSA
is revising this paragraph to clarify that
articles (including aerosols) are not
eligible for excepted quantity
reclassification under § 173.4a, although
some aerosols are eligible to be shipped
as small quantities by highway and rail
in § 173.4. This will eliminate confusion
as to the status of articles (including
aerosols) in the context of this
exception, while providing consistent
language structure with part 3, chapter
5, section 5.1 of the ICAO TI.
Section 173.21
This section outlines forbidden
materials and packages. Paragraph (e) of
this section forbids transport of a
material in the same packaging, freight
container, or overpack with another
material, that if mixed would likely
cause a dangerous evolution of heat,
flammable or poisonous gases or vapors,
or produce corrosive materials. While
this prohibition prevents incidents from
occurring within a freight container,
overpack or the same container, there is
no prohibition on this type within a
transport vehicle (e.g., a truck with
single trailer). A transport vehicle is
defined in § 171.8 as a cargo-carrying
vehicle such as an automobile, van,
tractor, truck, semitrailer, tank car or
rail car used for the transportation of
cargo by any mode. Each cargo-carrying
body is a separate transport vehicle.
Allowing materials within a single
cargo-carrying body (e.g., a trailer, a rail
car, etc.) that, if mixed, could cause a
E:\FR\FM\23JAP3.SGM
23JAP3
tkelley on DSK3SPTVN1PROD with PROPOSALS3
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
dangerous evolution of heat, flammable
or poisonous gases or vapors, or create
corrosive materials poses a significant
safety risk. This method of
transportation is forbidden within a
freight container, packaging, or
overpack, and while a transport vehicle
is slightly different than a packaging or
overpack, it is similar to a freight
container.
PHMSA received a request for a letter
of interpretation (Ref. No. 13–0111)
describing a potentially dangerous
situation. In the letter, the requestor
described a scenario whereby a
company offers for transportation
‘‘UN1908, Chlorite Solution, Class 8,
Packing Group (PG) II;’’ ‘‘UN1791,
Hypochlorite Solutions, Class 8, PG III;’’
and ‘‘UN1789, Hydrochloric Acid
Solution, Class 8, PG II’’ in separate
intermediate bulk containers (IBCs) in
the same transport vehicle. While there
are no formal segregation requirements
per § 177.848 of the HMR, data
accompanying the letter indicated that
in the event of commingling, these
materials would create chlorine dioxide
gas. ‘‘Chlorine dioxide (not hydrate)’’ is
forbidden for transportation per the
§ 172.101 HMT. Thus, the transportation
of these materials in the same transport
vehicle would create a situation where
the mixing of the materials would
produce a poisonous gas and highly
corrosive material, which happens to
also be forbidden from transport; yet,
under the current construct of § 173.21,
there is no prohibition against this
transport scenario.
The concern is that a single cargocarrying body, such as a trailer or rail
car, does not provide a level of safety
equivalent to if these materials were
intended to be in the same freight
container, yet it is permitted in the
HMR. Additionally, the loading and
unloading requirements for Class 8
materials in § 177.839 or part 174 do not
address the loading of chlorite solutions
and hypochloric acid in the same
transport vehicle.
Prohibiting the transportation or
offering for transportation of materials
in the same transport vehicle (e.g., a
trailer, a rail car) with another material
which is likely to cause a dangerous
evolution of heat, flammable or
poisonous gases or vapors, or produce
corrosive materials upon mixing would
address the safety risk referenced in the
letter of interpretation Ref. No. 13–0111,
for both rail and highway transport.
This change would afford these modes
of transportation the same level of safety
seen in intermodal transportation and
the forbidden materials restrictions for
freight containers. Therefore, PHMSA is
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
3797
proposing to revise § 173.21(e) to
include the term transport vehicle.
must conform to the quantity limitations
provided in § 173.27(f)(3), Table 3.
Section 173.24a
Section 173.24a prescribes additional
general requirements for non-bulk
packages. Paragraph (c)(1)(iv) provides
the quantity limits for mixed contents
packages (when multiple hazardous
materials are packed within the same
package) transported by aircraft. In this
rulemaking, we are proposing to clarify
that the requirements provided in
paragraph (c)(1)(iv) do not apply to
limited quantity materials packaged in
accordance with § 173.27(f)(2). This
change is proposed for clarification
purposes only. Misapplication of
§ 173.24a(c)(1)(iv) would be duplicative
and, in certain cases, would place
unintended restrictions on the net
quantity of hazardous materials per
package.
Section 173.150
This section provides exceptions for
Class 3 (flammable and combustible
liquid) hazardous materials. The
requirements for combustible liquids in
bulk packagings are found in
§§ 173.150(f)(3). Although placarding
under Subpart F of Part 172 is specified
as a requirement in § 173.150(f)(3)(iv),
registration requirements of § 107.601
are not included among the subject
requirements. Given that § 173.150(f)(3)
provides a list of subject requirements
for combustible liquids in bulk
packaging, PHMSA is revising this
section by adding a new subparagraph
§ 173.150(f)(3)(xi) stating that the
registration requirements in Subpart G
of Part 107 are also applicable, for bulk
packagings only. PHMSA is also
revising §§ 173.150(f)(3)(ix) and
173.150(f)(3)(x) for punctuation
applicable to the listing of requirements.
Section 173.27
This section prescribes general
requirements for the transportation of
hazardous material by aircraft.
Paragraph (f)(2) contains the provisions
for limited quantities but does not
expressly address limited quantity
packages of mixed contents. PHMSA
received a request for a letter of
interpretation (Ref. No. 13–0094) to
clarify, for transportation by aircraft, the
applicable section to reference.
Specifically, the requester asked
whether Table 3 in § 173.27(f)(3), or the
general provisions in § 173.24a(c)(1)(iv)
should be used when determining the
maximum net quantity of each inner
and outer packaging for limited quantity
packages of mixed contents. In
response, we stated that as provided in
§ 173.27(f)(2), when a limited quantity
of a hazardous material is packaged in
a combination packaging and is
intended for transportation aboard an
aircraft, the inner and outer packagings
must conform to the quantity limitations
set forth in Table 3. Table 3 provides the
maximum net quantity of each inner
and outer packaging for materials
authorized for transportation as a
limited quantity by aircraft. For mixed
contents of limited quantities by air, the
shipper must comply with the
maximum authorized net quantity of
each outer package (column 4 of 5 in
Table 3) and ensure that the total net
quantity does not exceed the lowest
permitted maximum net quantity per
package as shown by hazard class or
division for the hazardous materials in
the mixed contents package.
In this rulemaking, we are proposing
to revise § 173.27(f)(2)(i) to clarify that
the maximum net quantity for limited
quantity packages of mixed contents
PO 00000
Frm 00011
Fmt 4701
Sfmt 4702
Section 173.159
This section prescribes requirements
applicable to the transportation of
electric storage batteries containing
electrolyte acid or alkaline corrosive
battery fluid (i.e., wet batteries). This
section outlines packaging
requirements, exceptions for highway or
rail transport, and tests which batteries
must be capable of withstanding to be
considered as non-spillable. However,
there are no requirements or
instructions for shippers of damaged or
leaking wet batteries to prepare these
items for transport. PHMSA received a
request for a letter of interpretation (Ref.
No. 06–0031) to clarify whether a
shipper of a damaged wet battery may
utilize the exception from full
regulation provided in § 173.159(e). In
response, we stated that a damaged
battery may be shipped in accordance
with § 173.159(e) provided: (1) It has
been drained of battery fluid to
eliminate the potential for leakage
during transportation; (2) it is repaired
and/or packaged in such a manner that
leakage of battery fluid is not likely to
occur under conditions normally
incident to transportation; or (3) the
damaged or leaking battery is
transported under the provisions of
§ 173.3(c).
PHMSA is proposing to create a new
paragraph (j) in § 173.159 to address the
need for provisions that allow shippers
to prepare for transport and offer into
transportation damaged wet electric
storage batteries. This paragraph will
permit the transportation, by highway or
rail, of damaged wet electric storage
batteries under the conditions outlined
E:\FR\FM\23JAP3.SGM
23JAP3
3798
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
in the letter of interpretation. In
addition to the conditions listed in
paragraph (j), damaged wet electric
storage batteries must also meet all other
applicable requirements of § 173.159.
tkelley on DSK3SPTVN1PROD with PROPOSALS3
Section 173.166
This section prescribes requirements
applicable to the transportation of air
bag inflators, air bag modules, and seatbelt pretensioners. In a final rule
(Docket No. PHMSA–2010–0201 (HM–
254)) published on July 30, 2013 (78 FR
45880), PHMSA revised the
requirements applicable to these
materials. Among the changes made was
the adoption of Special Permit DOT SP–
12332 into the HMR, This special
permit excepted Class 9 air bag inflators,
air bag modules, or seat-belt
pretensioners assigned to UN3268 from
the requirement to provide the EX
number (i.e., the approval number) on
the shipping paper.
Under § 173.166, paragraph (e)(6)
authorizes packaging alternatives for air
bag inflators, air bag modules, and seatbelt pretensioners that have been
removed from, or were intended to be
used in, a motor vehicle; and those
devices meet the requirements for use in
the United States and are being
transported to recycling or waste
disposal facilities. When adopted in
HM–254, a provision in § 173.166 (e)(6)
stated ‘‘for domestic transportation by
highway’’ thereby limiting the use of
this exception to ground transport, yet
DOT SP–12332 specifically permitted
transport by ‘‘cargo vessel’’ as an
authorized mode of transportation. For
greater consistency with the special
permit language adopted in HM–254,
PHMSA is revising paragraph (e)(6) to
add the words ‘‘or cargo vessel.’’
Sections 173.170 and 173.171
These sections prescribe exceptions
for the transportation of black powder
for small arms classed as a Division 1.1
explosive and smokeless powder for
small arms classed as a Division 1.3
explosive. These exceptions permit
these materials to be reclassed as
Division 4.1 flammable solid material
for domestic transportation. In both
sections, the total quantity of black or
smokeless powder for small arms is
limited to 45.4 kg (100 pounds) net mass
in a motor vehicle (other modes are
authorized as well). PHMSA believes
the exception should be updated to
account for modern highway
transportation. Currently, the HMR
defines motor vehicle in § 171.8 to
include a vehicle, machine, tractor,
trailer, or semitrailer, or any
combination thereof. The use of the
term motor vehicle in this exception
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
limits a carrier with multiple trailers to
100 pounds total of black or smokeless
powder, reclassed as Division 4.1.
Carriers who commonly transport
double or triple trailer loads by highway
may find it difficult to ensure that each
trailer contains an amount of black or
smokeless powder, reclassed as Division
4.1 that would keep the total quantity in
all trailers under 100 pounds.
PHMSA believes the term motor
vehicle should be replaced with
transport vehicle in the context of this
exception and we believe doing so will
not decrease the level of safety for the
transport of these materials. The term
transport vehicle is defined in § 171.8 as
a cargo-carrying vehicle such as an
automobile, van, tractor, truck,
semitrailer, tank car or rail car used for
the transportation of cargo by any mode.
Each cargo-carrying body (a trailer, a rail
car, etc.) is a separate transport vehicle.
Changing the term motor vehicle to
transport vehicle would reflect a
consistency in the ability to use
exceptions for black or smokeless
powder with the other modes, such as
rail and vessel, whereby each rail car or
freight container is permitted to have
100 pounds total. Thus, PHMSA
proposes to revise §§ 173.170 and
173.171 to replace the term ‘‘motor
vehicle’’ with ‘‘transport vehicle.’’
Additionally, PHMSA is requesting
specific comment from stakeholders on
this issue and any data they have
relating to noted incidents involving
transporting black or smokeless powder
for small arms reclassed as Division 4.1
by motor vehicle.
Section 173.199
This section prescribes the packaging
requirements for Category B infectious
substances. Paragraph (a)(4) of this
section requires that the packaging be
capable of successfully passing the drop
test in § 178.609(d) and the steel rod
impact test in § 178.609(h) at a drop
height of at least 1.2 meters (3.9 feet).
PHMSA received a request for a letter
of interpretation regarding the test
requirements in § 173.199(a)(4) (Ref. No.
07–0018). The request pointed out that
in the preamble to the final rule
published on June 2, 2006 under Docket
Number PHMSA–2004–16895 (HM–
226A) [71 FR 32244], we state that
Category B packagings must be capable
of passing a drop test, but need not be
capable of passing a puncture or other
performance test. The requester asked if
the regulatory text requiring the steel
rod impact test for this packaging was
an error.
As we clarified in our response,
PHMSA did not intend to require the
steel rod impact test in § 178.609(h) for
PO 00000
Frm 00012
Fmt 4701
Sfmt 4702
a packaging used to transport a Category
B infectious substance. Therefore, in
this rulemaking, we are proposing to
revise the provisions in § 173.199(a)(4)
by removing the reference to the steel
rod impact test in § 178.609(h).
Section 173.216
This section establishes the
transportation requirements for blue,
brown, or white asbestos. Paragraph (c)
of this section provides packaging
requirements for asbestos including
both ‘‘non-bulk’’ and ‘‘bulk’’ packaging
options.
PHMSA received a request for a letter
of interpretation regarding the
applicability of bulk and non-bulk
packaging instructions for asbestos (Ref.
No. 11–0169). The letter expressed
confusion regarding whether § 173.216
should apply to both ‘‘bulk’’ and ‘‘nonbulk’’ packages of asbestos, because as
the requester noted in the letter, in the
§ 172.101 HMT, the entry for
‘‘Asbestos,’’ NA2212 refers to packaging
instructions specified in § 173.216 for
non-bulk packaging requirements, and
§ 173.240 for bulk packaging
requirements. It was also noted in the
letter that some of the packaging options
specified in § 173.216 are considered
bulk packagings.
PHMSA acknowledged that some of
the packaging options provided in
§ 173.216(c) meet the bulk packaging
definition specified in § 171.8 and,
therefore, would be considered a bulk
packaging for transportation purposes.
In this rulemaking, we are proposing to
amend the bulk packaging section
reference in Column (8C) of the HMT
from ‘‘240’’ to ‘‘216’’ for the table entries
associated with the following
identification numbers: NA2212,
UN2212, and UN2590. In addition, we
are proposing to revise paragraph (c)(1)
in § 173.216 by authorizing the use of
bulk packages prescribed in § 173.240.
These proposed amendments will: (1)
Eliminate the confusion pertaining to
bulk packaging specifications contained
in a section referenced in the authorized
non-bulk Column (8B) of HMT; and (2)
allow for the continued use of bulk
packages in § 173.240, while also
providing examples of specific bulk
packagings authorized for asbestos such
as hopper-type rail cars and hopper-type
motor vehicles currently found in
§ 173.216(c)(1).
Section 173.225
This section contains the packaging
requirements and other provisions
applicable to the transportation of
organic peroxides. Paragraph (d) of this
section contains the Packing Method
table, which provides packagings
E:\FR\FM\23JAP3.SGM
23JAP3
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
authorized for organic peroxides and the
maximum quantity permitted in each
package or packaging. The table is
missing information and PHMSA is
proposing to revise the table to add a
reference to note 1 for OP2, which states
that if two values are given, the first
applies to the maximum net mass per
inner packaging and the second to the
maximum net mass of the complete
package. Additionally, PHMSA is
proposing to revise the maximum
quantity for solids and combination
packagings (liquid and solid) for OP4.
This quantity should read as ‘‘5/25’’ kg
instead of only ‘‘5.’’
Section 173.301
tkelley on DSK3SPTVN1PROD with PROPOSALS3
This section applies to general
requirements for shipment of
compressed gases and other hazardous
materials in cylinders, UN pressure
receptacles and spherical pressure
vessels. Paragraph (g) of this section
describes the requirements to manifold
cylinders in transportation. A manifold
system is a single pipe or chamber
connected to a group of cylinders,
which allows for a single point of
loading and unloading.
Incidents investigated by the NTSB
have highlighted potential risks when
transporting manifolded acetylene
trailers.2 These incidents included
overturned vehicles and two unloading
releases. As a result of the impact
caused by ejection of the cylinders from
the vehicle during overturn incidents,
cylinders have shown signs of broken
valves, burst heads, burst walls, as well
as bulging and denting of the walls. The
impact resulting from the ejection of the
cylinders from the vehicle also can
cause the valves to break, which may
ignite the acetylene. The NTSB’s
investigation also concluded that the
unloading sequence is occasionally
done out of order from what is specified
in the standard operating procedures
and this can be a contributing factor to
incidents.
These recent incidents involving
manifolded acetylene trailers have
caused the National Transportation
Safety Board (NTSB) to issue two Safety
Recommendations (H–09–01 and H–09–
02) to PHMSA.3 The NTSB
investigations resulted in the issuance
of the following Safety
Recommendations:
H–09–01: Modify 49 CFR 173.301 to clearly
require (1) that cylinders be securely
mounted on mobile acetylene trailers and
2 https://www.ntsb.gov/doclib/safetystudies/
SIR0901.pdf.
3 https://phmsa.dot.gov/staticfiles/PHMSA/
DownloadableFiles/Files/NTSB%20Files/H_09_1_
2_Original.pdf.
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
other trailers with manifolded cylinders to
reduce the likelihood of cylinders being
ejected during an accident and (2) that the
cylinder valves, piping, and fittings be
protected from multidirectional impact forces
that are likely to occur during highway
accidents, including rollovers.
H–09–02: Require fail-safe equipment that
ensures that operators of mobile acetylene
trailers can perform unloading procedures
only correctly and in sequence.
Given the results of the NTSB
investigations and the associated safety
risks of mobile acetylene trailer
overturns and unloading operations,
PHMSA proposes to incorporate by
reference in § 171.7 of the HMR the CGA
pamphlet G–1.6–2001, Standard for
Mobile Acetylene Trailer Systems (7th
ed.). CGA G–1.6 would serve to address
the NTSB Safety Recommendations
specific to mobile acetylene trailers.
This pamphlet was updated with input
from PHMSA and the industry to
address cylinder securement under
accident conditions, valve protection
from multidirectional impact forces and
unloading fail-safe procedures specific
to mobile acetylene trailers.
Specifically, PHMSA proposes to
incorporate the CGA pamphlet into
§ 171.7, and revise § 173.301(g)(1)(iii) to
indicate that mobile acetylene trailers
must be maintained, operated and
transported in accordance with CGA
Pamphlet G–1.6. In addition, PHMSA
seeks specific comment on the inclusion
of CGA Technical Bulletin (TB) TB–25
to address structural integrity
requirements. PHMSA is also proposing
to revise § 177.840, by adding paragraph
(a)(3) to state that cylinders containing
acetylene and manifolded as part of a
mobile acetylene trailer system must be
transported in accordance with
§ 173.301(g) to ensure that this
requirement is addressed in the carriage
by highway portion of the HMR.
PHMSA seeks comment on the number
of entities affected by this proposal, if
any. Finally, PHMSA seeks comment on
safety implications of such a change as
well as the net benefit such a change
(i.e., decrease in the number of
frustrated shipments) would provide.
Sections 173.304a(d)(5), 173.314(h) and
173.315(b)(1)
Section 173.304a establishes
additional requirements for the
shipment of LPG in specification
cylinders. Section 173.314 establishes
requirements for compressed gases in
tank cars and multi-unit tank cars and
§ 173.315 establishes requirements for
compressed gases in cargo tanks and
portable tanks. PHMSA is aware of
several incidents possibly attributed to
either the under-odorization or odorant
PO 00000
Frm 00013
Fmt 4701
Sfmt 4702
3799
fade of LPG. Most notable of these
incidents is one that happened in
Norfolk, MA on July 30, 2010 where an
explosion occurred at a residential
condominium complex that was under
construction. Emergency responders
from 21 cities/towns deployed
personnel to the accident site. The
accident resulted in seven injuries and
one fatality.
The subsequent investigation raised
questions as to whether there was a
sufficient level of odorant in the LPG
contained in the on-site storage tanks. In
accordance with Federal and State laws
and regulations, LPG intended for use
by non-industrial entities is generally
required to be odorized, or stenched, to
enable the detection of any unintended
release or leak of the gas. LPG is highly
flammable and dangerous to inhale in
large quantities. The added odorant is a
safety precaution that helps warn those
in the area that a release of gas has
occurred. In the Norfolk incident, there
appeared to be no warning, i.e. there
was no noticeable evidence of odorant
that would indicate the on-site LPG
storage tank was leaking prior to the
explosion. PHMSA has consulted with
stakeholders from industry, fire fighter
associations, and other regulatory
agencies in order to better understand
the root cause of incidents like the one
in Norfolk. Although additional
research may be necessary in order to
come to more definitive conclusions,
PHMSA has identified the following
situations in which the risks of underodorization or odorant fade are more
likely to occur:
Injection Process: On December 13,
2012, PHMSA met with representatives
from the National Propane Gas
Association (NPGA) to gain a better
understanding of the LPG odorization
process. During this meeting,
representatives from the NPGA stated
that the most common method for the
odorization of LPG is through an
automated system. However, the NPGA
also noted there are situations where the
odorization process is manually
performed. Preliminary investigations
into the Norfolk, MA incident suggest
that the lack of sufficient odorization
rendered the LPG undetectable when
the on-site storage tank began to leak. In
situations where the injection process is
not fully automated, the potential for
human error may increase the
possibility of under-odorization. We
believe that the insufficient level of
odorant in the LPG contained in the onsite storage tank involved in the
Norfolk, MA incident was likely a major
contributing factor in limiting the ability
of on-site personnel to readily detect the
leak.
E:\FR\FM\23JAP3.SGM
23JAP3
3800
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
tkelley on DSK3SPTVN1PROD with PROPOSALS3
New Tanks or Freshly Cleaned Tanks:
During our meetings with various
stakeholders, several indicated that a
phenomenon known as ‘‘odor fade’’ may
be a problem when new or recently
cleaned tanks are used. New or recently
cleaned tanks may absorb the odorant
into the metal shell of these tanks
leading to an ‘‘odorant fade,’’ and thus
limiting the effectiveness of the
remaining odorant in the LPG.
Odorization Standards: The
odorization of LPG is addressed by
Federal and state laws and regulations,
as well as generally accepted industry
standards and practices. When offered
and transported in commerce, the HMR
specifies that all LPG in cargo and
portable tanks be effectively odorized
using either 1.0 pound of ethyl
mercaptan, 1.0 pound of thiopane, or
1.4 pounds of amyl mercaptan per
10,000 gallons of LPG, in the event of
an unintended release or leak to
indicate the presence of gas. The HMR
do not, however, require LPG to be
odorized if odorization would be
harmful in the use or further processing
of the LPG, or if odorization will serve
no useful purpose as a warning agent in
such use or further processing.
Essentially, this exception applies to
LPG being transported to industrial endusers.
Although the HMR requires
odorization of LPG in cargo tanks and
portable tanks, there are no such
parallel requirements in the HMR for
rail tank car tanks and cylinders.
Therefore, in this NPRM, we are
proposing to add new §§ 173.304a(d)(5)
and 173.314(h) consistent with the
revised text in § 173.315(b)(1) to address
the odorization of LPG in cylinders and
rail tank car tanks, respectively. We are
also proposing to revise § 173.315(b)(1)
to add a performance standard to
address the issues of ‘‘under
odorization’’ and ‘‘odor fade.’’
Section 173.306
This section provides exceptions from
the HMR for compressed gases,
including aerosols, when transported in
limited quantities. In a final rule
published May 14, 2010, under
PHMSA–2009–0289 (HM–233A) [75 FR
27205], PHMSA added a new paragraph
(k) to § 173.306 adopting provisions
from DOT–SP 12842. These provisions
authorized an increase in gross weight
per package for the purpose of
packaging discarded empty, partially
used, and full aerosol containers to be
transported to a recycling or disposal
facility.
PHMSA received a request for a letter
of interpretation (Ref. No. 12–0004)
seeking confirmation that aerosols
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
shipped for disposal or recycling in
compliance with § 173.306(k) are
permitted the same exceptions (i.e., the
marking and labeling requirements of
Part 172 Subparts D and E respectively,
and shipping paper requirements,
unless it is a hazardous waste or
hazardous substance, of 172 Subpart C)
granted under §§ 173.306(i) and
173.156(b) without being reclassified as
an ORM–D material. The requester also
pointed out that under DOT–SP 12842,
aerosols shipped for disposal or
recycling were excepted from the
marking, labeling and shipping paper
requirements, unless they were
considered a hazardous waste or
hazardous substance, without being
reclassified as an ORM–D material.
PHMSA stated that the intention of
HM–233A was to adopt DOT–SP 12842
into the HMR as was designed.
Therefore, in this rulemaking, we
propose to amend § 173.306(k) by
clarifying that aerosols shipped for
recycling or disposal by motor vehicle,
containing a limited quantity under the
specific conditions provided in
§ 173.306(k), are afforded the applicable
exceptions provided for ORM–D
materials granted under §§ 173.306(i)
and 173.156(b). The letter provides that,
consistent with § 173.306(i), packages
containing aerosols meeting the limited
quantity requirements of § 173.306(k)
must be marked in accordance with
§ 172.315(b). In addition, the letter also
clarifies that the language ‘‘INSIDE
CONTAINERS COMPLY WITH
PRESCRIBED REGULATIONS’’ is
required for shipments of aerosols
shipped for disposal or recycling in
compliance with paragraphs (a)(3),
(a)(5), or (b)(1) of § 173.306.
Part 175
Section 175.1
This section describes the purpose,
scope and applicability of Part 175 to air
operations, specifically, the
transportation of hazardous materials in
commerce by air. Exceptions for certain
aircraft operations are listed in
§ 175.9(b). Paragraph (b)(4) of § 175.9
excepts hazardous materials carried and
used during dedicated air ambulance,
firefighting, or search and rescue
operations. To clarify that these
operations are not subject to the HMR
when in compliance with applicable
Federal Aviation Regulations (FAR; 14
CFR) and any additional FAA
requirements, PHMSA proposes to
create a new paragraph (d) in § 175.1
stating that the HMR does not apply to
dedicated air ambulance, firefighting, or
search and rescue operations. This will
eliminate any confusion that these air
PO 00000
Frm 00014
Fmt 4701
Sfmt 4702
operations would otherwise be subject
to requirements in the HMR (e.g.,
passenger notification requirements).
PHMSA also proposes to remove
§ 175.9(b)(4) for consistency.
As with other conditional exceptions
to the HMR, non-compliance with the
FAR could subject operators to
enforcement under the HMR. PHMSA
does not anticipate any adverse safety
consequences with this proposed
revision due to the existing training
requirements in the FAR on the proper
handling and stowage of hazardous
materials carried onboard aircraft.
The FAA and PHMSA recognize that
certain operators do not solely utilize
their aircraft for purposes under
§ 175.9(b)(4). Normal transport
operations (i.e., the transport of either
passengers or cargo not required for
performance of, or associated with, the
specialized emergency function) would
continue to be subject to the HMR.
However, staging operations and other
operations related to dedicated air
ambulance, firefighting, or search and
rescue operations are intended to be
excepted from the HMR when in
compliance with the FAR. We note the
following definitions in FAA Order
8900.1 (Vol. 3, Chapter 14, Section 1, 3–
529(C)):
(1) Firefighting. This term includes the
drop of fire retardants, water, and smoke
jumpers. It also includes the transport of
firefighters and equipment to a fire or to a
base camp from which they would be
dispersed to conduct the firefighting
activities.
(2) Search and Rescue. Search and rescue
is a term of art meaning aircraft operations
that are flown to locate people who cannot
be located from the ground. The term
includes operations where the aircraft is
indispensable to the search, or is the only
feasible means of reaching the victim.
Victims would be considered to be
‘‘associated with’’ the search and rescue
operation. The term ‘‘search and rescue’’
does not include routine medical evacuation
of persons due to traffic accidents and other
similar incidents.
Air ambulance operators are required
by the FAR to utilize either Operational
Specification (OpSpec) A021
((Helicopter Emergency Medical
Services (HEMS) Operations) or A024
(Air Ambulance Operations-Airplane)
and must obtain and adhere to the
appropriate OpSpec to be excepted from
the HMR.
Section 175.8
This section provides exceptions from
certain regulations for air carrier
operator equipment and items of
replacement. Paragraph (b)(1) provides
that oxygen, or any hazardous material
used for the generation of oxygen, for
E:\FR\FM\23JAP3.SGM
23JAP3
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
tkelley on DSK3SPTVN1PROD with PROPOSALS3
medical use by a passenger, which is
furnished by the aircraft operator in
accordance with certain 14 CFR
requirements is not subject to the
requirements of the HMR. The
provisions of 14 CFR, § 125.219, Oxygen
for medical use by passengers, was
inadvertently left out of paragraph
(b)(1). In this rulemaking, we are
proposing to correct the paragraph by
adding the appropriate 14 CFR, Part 125
citation.
Section 175.10
This section provides exceptions for
passengers, crewmembers, and air
operators. Paragraph (a) of this section
lists a number of hazardous materials
that are permitted for carriage by
passengers or crewmembers provided
the requirements of §§ 171.15 and
171.16 and the conditions of this section
are met. PHMSA is proposing revisions
to some of these provisions to promote
clarity.
In paragraph (a)(6), hair curlers
(curling irons) containing a hydrocarbon
gas such as butane and carried in carryon or checked baggage, are excepted
from the requirements of the HMR. Gas
refills for such curlers are not permitted
in carry-on or checked baggage. In this
NPRM, PHMSA proposes to prohibit
such hair curlers in checked baggage.
We believe the risk posed by flammable
gases in an inaccessible compartment on
a passenger-carrying aircraft is obvious.
Flammable gases will burn if mixed
with an appropriate amount of air and
confined burning of a flammable gas can
lead to detonation. As a result, we
remain concerned with the flammability
hazard posed by butane and other
flammable gases and the ability of such
gases to propagate or contribute to a fire
in the cargo compartment of an aircraft.
This concern is particularly relevant to
carriage in checked baggage where
damage to the curling iron and the
subsequent release of a flammable gas
may occur if the baggage is mishandled
or the article itself is compromised.
Because of the risks posed by
flammable gas, a number of safety
requirements apply to cargo shipments
of flammable gas on passenger-carrying
aircraft. Most Division 2.1 flammable
gas substances and articles are generally
forbidden from transportation as cargo
aboard passenger-carrying aircraft and
prohibiting the carriage of butanepowered curling irons in checked
baggage is consistent with this
provision. In the area of aviation safety,
where the high volume of travel and the
catastrophic consequences of failure
lead to a very low tolerance for risk, we
firmly believe the known risks of
flammable gas are sufficient basis for
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
our decision. We solicit public comment
on any impact our proposed action may
impose upon passengers, crew
members, and air operators.
In paragraph (a)(22) of this section,
non-infectious specimens transported in
accordance with § 173.4b(b) (de
minimus quantities) are permitted for
carriage by passengers or crewmembers.
PHMSA is clarifying this exception to
include the phrase ‘‘in preservative
solutions’’ to clarify the intended use of
this exception. Non-infectious
substances would not otherwise be
subject to the HMR if they did not
otherwise meet the definition of any
other hazard classes. This clarification
will signal that the exception refers to
specimens in solutions that may contain
preservatives that are hazardous
materials such as formaldehyde and
alcohol solutions.
Additionally PHMSA is revising
paragraph (a)(24) of this section, which
refers to small cartridges of carbon
dioxide or other suitable gas of Division
2.2. The exception states that small
cartridges fitted into devices with no
more than four small cylinders are
permitted. This is inconsistent with the
ICAO TI, which permits cartridges for
other devices indicating that spares are
permitted. As § 175.10(a)(24) currently
reads, there is no mention of spare
cartridges. The HMR currently permits
up to four small cartridges and
therefore, PHMSA is proposing to revise
this paragraph to state that small
cartridges fitted into or securely packed
with devices with no more than four
small cylinders of carbon dioxide or
other suitable gas in Division 2.2 are
permitted for carriage by passengers or
crewmembers. This change will
harmonize with international standards
to clarify that spares are permitted in
addition to the cartridges already fitted
into the device, provided they are
securely packed with the devices for
intended use.
Section 175.75
This section describes the quantity
limitations and cargo locations for
carriage by aircraft. Paragraph (e)(2)
excepts packages of hazardous materials
transported aboard a cargo aircraft,
when other means of transportation are
impracticable or not available, in
accordance with procedures approved
in writing by the FAA Regional or Field
Security Office in the region where the
operator is located from the
requirements of paragraphs (c) and (d)
of § 175.75. PHMSA is revising this
paragraph by removing the word
‘‘located’’ and adding the word
‘‘certificated’’ in its place. The words
‘‘or Field Security’’ are also removed.
PO 00000
Frm 00015
Fmt 4701
Sfmt 4702
3801
This amendment will ensure operators
interact with the Hazardous Materials
Division Manager (HMDM) who has
already reviewed and recommended for
approval the certificate’s HazMat-related
manual(s) required under 14 CFR 14
CFR 121.135. The HMDM (or designee)
will already have an understanding of
the certificate’s operations and, as
needed, will interact with the local
resources and/or the operator’s
certificate management team to assess
the impracticability or lack of
availability of other cargo operations—
as well as what alternative procedures
should be prescribed.
Part 176
Section 176.30
This section prescribes the
information required on dangerous
cargo manifests for vessel transport.
Paragraph (a)(4) requires ‘‘the number
and description of packages (barrels,
drums, cylinders, boxes, etc.) and gross
weight for each type of packaging.’’ In
this rulemaking, we are proposing to
replace the word ‘‘packaging’’ with
‘‘package’’ as the term ‘‘packaging’’
refers to the means of containment and
not the completed package.
Part 177
Section 177.848
This section addresses segregation
requirements for hazardous materials
transported by motor carrier. PHMSA
received a request for a letter of
interpretation (Ref. No. 09–0268)
requesting clarification whether
‘‘UN0042, Boosters, 1.1D, PG II’’ and
‘‘UN1942, Ammonium nitrate, 5.1, PG
III’’ can be transported in the same
vehicle. The requester noted seemingly
conflicting requirements in §§ 177.835
and 177.848 applicable to the
segregation of ammonium nitrate
fertilizer and explosive materials.
Section 177.848(e) provides
instructions for using the segregation
table in § 177.848(d). Presently, under
§ 177.848(e)(5) assignment of note ‘‘A’’
authorizes ammonium nitrate (UN1942)
and ammonium nitrate fertilizer to be
loaded or stored with Division 1.1
(explosive) or Division 1.5 materials.
However, § 177.835(c) provides that
Division 1.1 or 1.2 (explosive) materials
may not be loaded into or carried on any
vehicle or a combination of vehicles
under certain conditions outlined in
paragraphs (c)(1) through (c)(4). PHMSA
clarified in the letter that a Division 1.1
or 1.2 explosive may not be loaded into
or carried on any vehicle or a
combination of vehicles that does not
conform to §§ 177.835(c)(1) through (4),
regardless of the note ‘‘A’’ exception for
E:\FR\FM\23JAP3.SGM
23JAP3
3802
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
UN1942 in § 177.848(e)(5). In this
rulemaking, we are proposing to clarify
that the loading restrictions in
§ 177.835(c)(1) through (4) are
applicable to § 177.848(e).
Part 178
Section 178.65
This section applies to the
manufacture of DOT Specification 39
non-reusable (non-refillable) cylinders.
Paragraph (i) of this section describes
the required markings for DOT 39
cylinders. The reference to § 178.35(h)
in § 178.65(i)(1) is incorrect, as
§ 178.35(h) was removed under a final
rule published July 20, 2011 (Docket No.
PHMSA–2009–0151 (HM–218F). The
final rule consolidated the inspector’s
report requirements found in § 178.35(g)
into paragraph (c)(4) of that section,
moved the manufacturer’s report
retention requirements into paragraph
(g) and removed paragraph (h). PHMSA
is proposing to revise § 178.65(i)(1) to
correctly reference the manufacturer’s
report requirements in § 178.35(g).
Section 178.337–17
This section prescribes the marking
requirements applicable to MC 331
cargo tank motor vehicles. Paragraph (a)
of this section outlines general
requirements for marking of MC 331
cargo tank motor vehicles. PHMSA
received a request for a letter of
interpretation to clarify the applicability
of these markings in § 178.337–17(a)
(Ref. No. 04–0206). The request pointed
out an incorrect use of the term cargo
tank as it applies to the requirement for
specification plates found in paragraph
(a), which states that:
tkelley on DSK3SPTVN1PROD with PROPOSALS3
‘‘Each cargo tank certified after October 1,
2004 must have a corrosion-resistant metal
name plate (ASME Plate) and specification
plate permanently attached to the cargo tank
by brazing, welding or other suitable means
on the left side near the front, in a place
accessible for inspection.’’
In response, we stated that an MC 331
cargo tank must have a metal name plate
(also referred to as an ASME plate)
permanently attached to the cargo tank.
In addition, an MC 331 cargo tank motor
vehicle certified after October 1, 2004,
must have a specification plate that
includes the information specified in
§ 178.337–17(c). PHMSA is proposing to
clarify § 178.337–17(a) to eliminate
confusion of the name plate and
specification plate requirements.
Section 178.345–3
This section prescribes general
requirements for the structural integrity
of specification cargo tanks. Paragraph
(c)(1) of this section addresses stress in
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
the cargo tank shell resulting from
normal operating loadings. PHMSA
published a final rule on October 2,
2013 (Docket No. PHMSA–2013–0158
(HM–244F); 78 FR 60745; effective
October 1, 2013) intending to correct the
formula presented in paragraph (c)(1)
for the figure ‘‘SS2’’ to read ‘‘SS2.’’ This
correction correctly adjusted the
standard ‘‘2’’ in the term to be a
superscript ‘‘2,’’ but inadvertently
adjusted the second ‘‘S’’ from a
subscript ‘‘S’’ to a standard ‘‘S.’’ This is
incorrect and PHMSA is proposing to
revise this portion of the formula in
§ 178.345–3(c)(1) to read ‘‘SS2.’’
Section 178.955
This section prescribes the design and
testing criteria for Large Packagings.
Presently, if a manufacturer of a Large
Packaging wishes to construct a Large
Packaging that differs from a listed
specification there is no Associate
Administrator approval provision
outlined in the HMR. However, the
HMR allude to the need for an approval
in the Large Packaging marking
requirements in § 178.910(a)(1)(ii). The
HMR has approval provisions in Part
178 for manufacturers of both non-bulk
packagings and IBCs when constructing
packagings that differ from listed
specifications. In this rulemaking, we
are proposing to include provisions
consistent with the non-bulk packaging
and IBC approval provisions for Large
Packagings in § 178.955. Such Large
Packagings must be shown to be equally
effective, and testing methods used
must be equivalent. This change will
resolve the issue with § 178.910(a)(1)(ii)
and would be consistent with the UN
Model Regulations and the IMDG Code,
which provide approval provisions for
non-bulk packagings, IBCs, and Large
Packagings.
Part 179
Section 179.13
This section includes limitations on
rail tank car capacity and gross weight.
With certain exceptions, this section
generally limits the gross weight on rail
of tank cars to 263,000 pounds. This
section has been revised numerous
times over the last several years. In
2009, PHMSA added paragraph (b) to
this section authorizing tank cars
designed to transport poisonous-byinhalation (PIH) materials and built
with certain mandated safety
improvements (tank cars meeting the
specifications of § 173.244(a)(2) or (3) or
§ 173.314(c) or (d)) to have a gross
weight on rail of up to 286,000 pounds
provided any weight increase was not
used to increase product capacity. 74 FR
PO 00000
Frm 00016
Fmt 4701
Sfmt 4702
1770 (Jan. 13, 2009). Subsequently, in
an effort to incorporate several widely
used special permits providing relief
from the gross weight limitations of
§ 179.13, PHMSA revised the section to
provide FRA the authority to approve
the operation of tank cars containing
materials other than PIH materials at
gross weights of up to 286,000 pounds.
75 FR 27205 (May 14, 2010). FRA
published notice of its approvals under
this section on January 25, 2011. 76 FR
4250.
In 2011, noting that the agency’s
stated intent in the 2010 rule was to
incorporate into the HMR existing
special permits related to tank car gross
weight for tank cars carrying both nonPIH materials and PIH materials by
giving FRA authority to approve tank
car weights up to 286,000 pounds for
both types of tank cars, PHMSA
proposed to revise § 179.13 to correct
the omission of PIH material tank cars
from FRA’s approval authority. See 76
FR 51324, 51331. However, when
adopted as a final rule, the regulatory
language did not correct this inadvertent
omission. See 77 FR 37962, 37985 (HM–
218B) (June 25, 2012). Instead, in the
final HM–218B rule, § 179.13 was
revised to provide that tank cars
designed to transport PIH materials and
built with the mandated safety
improvements set forth in
§ 173.244(a)(2) or (3) or § 173.314(c) or
(d)) ‘‘may have a gross weight on rail of
up to 286,000 pounds upon approval by
the Associate Administrator for Railroad
Safety, FRA.’’ As clearly demonstrated
by the 2009 and 2010 rules, it was not
the intent of either PHMSA or FRA to
require FRA approval of tank cars built
to the enhanced standards of
§ 173.244(a)(2) or (3) or § 173.314(c) or
(d) for those cars to operate at a gross
rail load of 286,000 pounds.
Accordingly, in this rule PHMSA is
proposing to revise § 179.13 to correct
this error and (1) make it clear that tank
cars built to the enhanced standards of
§ 173.244(a)(2) or (3) or § 173.314(c) or
(d) do not need FRA approval to operate
at gross rail loads of up to 286,000
pounds; and (2) to provide for FRA
approval of tank cars containing PIH
materials that do not meet the enhanced
standards to operate at gross rail loads
of up to 286,000 pounds.
Part 180
Section 180.209
This section prescribes requalification
requirements for DOT specification
cylinders. Paragraph (j) contains a
reference to an obsolete special
provision. In a January 7, 2013 final rule
(78 FR 1101), we removed and relocated
E:\FR\FM\23JAP3.SGM
23JAP3
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
regulatory text from § 172.102(c)(1)
Special Provision 18 to § 173.309(a),
which prescribes the conditions when
specification cylinders may be
described, offered, and transported in
commerce as fire extinguishers. In
relocating the text, we did not update
this section to reflect the change. In this
rulemaking, we are proposing to correct
this inconsistency by replacing the
reference to § 172.102(c)(1) Special
Provision 18 with § 173.309(a).
Section 180.401
This section provides the
applicability of the requirements of
Subpart E of Part 180. It states that
Subpart E prescribes requirements, in
addition to those contained in Parts 107,
171, 172, 173 and 178 of this
subchapter, applicable to any person
responsible for the continuing
qualification, maintenance or periodic
testing of a cargo tank.
The term ‘‘person,’’ as defined in
§ 171.8, means an individual,
corporation, company, association, firm,
partnership, society, joint stock
company; or a government, Indian tribe,
or authority of a government or tribe
offering a hazardous material for
transportation in commerce or
transporting a hazardous material to
support a commercial enterprise. This
term does not include the United States
Postal Service or, for purposes of 49
U.S.C. 5123 and 5124, a Department,
agency, or instrumentality of the
government.
The intent of § 180.401 is to require a
person involved with continuing
qualification, maintenance or periodic
testing of a cargo tank to comply with
the requirements of Subpart E, even if
they are not offering a hazardous
material for transportation in commerce
or transporting a hazardous material to
support a commercial enterprise. In this
rulemaking, we are proposing to revise
the term ‘‘person’’ to ‘‘hazardous
materials employee or hazardous
materials employer.’’ This will clarify
that Subpart E of Part 180 not only
applies to persons offering hazardous
materials for transportation or
transporting a hazardous material, but
also those involved with qualification,
maintenance or periodic testing.
tkelley on DSK3SPTVN1PROD with PROPOSALS3
V. Regulatory Analyses and Notices
A. Statutory/Legal Authority for This
Rulemaking
This NPRM is published under
authority of Federal hazardous materials
transportation law (Federal hazmat law;
49 U.S.C. 5101 et seq.). Section 5103(b)
of Federal hazardous materials law
authorizes the Secretary of
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
Transportation to prescribe regulations
for the safe transportation, including
security, of hazardous materials in
intrastate, interstate, and foreign
commerce. If adopted as proposed, this
NPRM would make miscellaneous
amendments to the HMR, correct errors
in the § 172.101 HMT and
corresponding special provisions, and
respond to NTSB Safety
Recommendations related to the safe
transportation of manifolded acetylene
cylinders.
Additionally, this NPRM will respond
to petitions for rulemaking related to the
allowable format for emergency
telephone numbers on shipping papers,
relax the pressure test interval for
certain cargo tanks in dedicated propane
service, enhance the safe packaging for
nitric acid, clarify the testing
requirements for specification cargo
tank pressure relief devices, harmonize
the hazard communication requirements
for poisonous by inhalation materials
transported by vessel and eliminate a
potentially confusing packing group
designation for certain organic
peroxides, self-reactive materials and
explosives. These amendments clarify
regulatory requirements and, where
appropriate, decrease the regulatory
burden without compromising the safe
transportation of hazardous materials in
commerce.
B. Executive Order 12866, Executive
Order 13563 and DOT Regulatory
Policies and Procedures
This proposed rule is not considered
a significant regulatory action under
section 3(f) and was not reviewed by the
Office of Management and Budget
(OMB). The proposed rule is not
considered a significant rule under the
Regulatory Policies and Procedures
order issued by the Department of
Transportation [44 FR 11034].
In this notice of proposed rulemaking,
we propose to amend miscellaneous
provisions in the HMR to clarify the
provisions and to relax overly
burdensome requirements. PHMSA
anticipates the proposals contained in
this rule will have economic benefits to
the regulated community. This NPRM is
designed to increase the clarity of the
HMR, thereby increasing voluntary
compliance while reducing compliance
costs.
Executive Order 13563 is
supplemental to and reaffirms the
principles, structures, and definitions
governing regulatory review that were
established in Executive Order 12866
Regulatory Planning and Review of
September 30, 1993. In addition,
Executive Order 13563 specifically
requires agencies to: (1) Involve the
PO 00000
Frm 00017
Fmt 4701
Sfmt 4702
3803
public in the regulatory process; (2)
promote simplification and
harmonization through interagency
coordination; (3) identify and consider
regulatory approaches that reduce
burden and maintain flexibility; (4)
ensure the objectivity of any scientific
or technological information used to
support regulatory action; and (5)
consider how to best promote
retrospective analysis to modify,
streamline, expand, or repeal existing
rules that are outmoded, ineffective,
insufficient, or excessively burdensome.
In this NPRM, PHMSA has involved
the public in the regulatory process in
a variety of ways. Specifically, PHMSA
is addressing issues and errors that were
identified for future rulemaking in
letters of interpretation and through
other correspondence with PHMSA
stakeholders who bring editorial errors
in the HMR to our attention. In addition,
PHMSA has responded to seven
petitions for rulemaking and two NTSB
Safety Recommendations. PHMSA is
asking for public comments based on
the proposals in this NPRM. Upon
receipt of public comment, PHMSA will
address all substantive comments in the
next rulemaking action under this
docket number.
The proposed amendments in the
NPRM promote simplification and
harmonization through interagency
coordination. In this NPRM, PHMSA is
proposing to revise 49 CFR part 175, in
a collaborative effort with the Federal
Aviation Administration (FAA), to
clarify the applicability of the HMR to
certain aircraft operators, clarify
exceptions for passengers and
crewmembers, correct inaccurate
references to the 14 CFR, as well as
make minor editorial corrections
applicable to air operations to improve
overall clarity. There are minimal
additional costs associated with these
proposals, however increased clarity
will result in net benefits. Additionally,
by updating references to the AAR Tank
Car Manual in § 171.7, PHMSA worked
collaboratively with FRA, promoting
interagency coordination.
This NPRM also promotes
harmonization with international
standards, such as the IMDG Code,
Canada’s TDG requirements and the
ICAO TI. These efforts include:
• Harmonizing hazard
communication for poisonous-byinhalation materials with the IMDG
Code and TDG regulations;
• Removing the packing group II
designation for certain organic
peroxides, self-reactive substances and
explosives to be consistent with the UN
Recommendations, IMDG Code and
E:\FR\FM\23JAP3.SGM
23JAP3
tkelley on DSK3SPTVN1PROD with PROPOSALS3
3804
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
ICAO TI and thus, facilitate
international transport;
• Harmonizing entries in the HMT
with the above listed international
standards;
• Revising the passenger exceptions
applicable to small cartridges containing
Division 2.2 gas with the ICAO TI; and
• Harmonizing the excepted
quantities requirements to mirror
language employed in the ICAO TI as
they apply to articles.
These revisions to the § 172.101 HMT
will eliminate errors in the § 172.101
HMT, reduce ambiguity, harmonize the
HMR with international regulations, and
improve clarity. Although these
revisions are minor, they are expected to
produce a safety benefit derived from
the increased clarity and accuracy of the
text in the § 172.101 HMT.
This NPRM permits flexibility in
achieving compliance when
transporting damaged wet electric
storage batteries. This NPRM also
extends the requalification interval for
certain MC 331 cargo tanks in dedicated
propane service from five years to ten
years for a pressure test and internal
visual inspection, therefore, fostering
greater regulatory flexibility without
compromising transportation safety.
PHMSA is also clarifying the regulations
to provide flexibility in the ability to use
the NOT-ODORIZED or NONODORIZED marking on cargo tanks,
cylinders and portable tanks containing
odorized or unodorized LPG.
Additionally, by allowing 100 pounds of
black or smokeless powder for small
arms reclassed as Division 4.1 in each
transport vehicle, instead of each motor
vehicle, the regulated community can
reduce the number of motor vehicles
needed to transport these goods.
Where PHMSA identified potential
costs to stakeholders, specific comment
was requested to clarify such costs. We
request specific comment on potential
cost impacts of the proposals in
§ 172.604 and § 173.158(e).
A majority of the amendments in this
rulemaking are simple clarifications and
do not require significant scientific or
technological information. However,
when necessary in this NPRM, PHMSA
used scientific or technological
information to support its regulatory
action. Specifically, such data was
considered when structuring
alternatives on how to best deal with
issues regarding the testing of pressure
relief devices for cargo tank motor
vehicles and extending the pressure test
and internal visual inspection test
interval from five to ten years for certain
MC 331 cargo tanks in dedicated
propane delivery service. This
information was used in the evaluation
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
of alternative proposals and ultimately
this information determined how best to
promote retrospective analysis to
modify and streamline existing
requirements that are outmoded,
ineffective, insufficient, or excessively
burdensome.
C. Executive Order 13132
This proposed rule was analyzed in
accordance with the principles and
criteria contained in Executive Order
13132 (‘‘Federalism’’). This proposed
rule would preempt state, local and
Indian tribe requirements but does not
propose any regulation that has
substantial direct effects on the states,
the relationship between the national
government and the states, or the
distribution of power and
responsibilities among the various
levels of government. Therefore, the
consultation and funding requirements
of Executive Order 13132 do not apply.
The Federal hazardous material
transportation law, 49 U.S.C. 5125(b)(1),
contains an express preemption
provision (49 U.S.C. 5125(b))
preempting state, local, and Indian tribe
requirements on certain covered
subjects. Covered subjects are:
(i) The designation, description, and
classification of hazardous materials;
(ii) The packing, repacking, handling,
labeling, marking, and placarding of
hazardous materials;
(iii) The preparation, execution, and
use of shipping documents related to
hazardous materials and requirements
related to the number, content, and
placement of those documents;
(iv) The written notification,
recording, and reporting of the
unintentional release in transportation
of hazardous materials; or
(v) The design, manufacture,
fabrication, marking, maintenance,
reconditioning, repair, or testing of a
packaging or container which is
represented, marked, certified, or sold
as qualified for use in the transport of
hazardous materials.
This proposed rule concerns the
classification, packaging, and handling
of hazardous materials, among other
covered subjects. If adopted, this rule
would preempt any state, local, or
Indian tribe requirements concerning
these subjects unless the non-Federal
requirements are ‘‘substantively the
same’’ (see 49 CFR 107.202(d) as the
Federal requirements.)
Federal hazardous materials
transportation law provides at 49 U.S.C.
5125(b)(2) that if PHMSA issues a
regulation concerning any of the
covered subjects, PHMSA must
determine and publish in the Federal
Register the effective date of Federal
PO 00000
Frm 00018
Fmt 4701
Sfmt 4702
preemption. That effective date may not
be earlier than the 90th day following
the date of issuance of the final rule and
not later than two years after the date of
issuance. PHMSA proposes the effective
date of federal preemption be 90 days
from publication of a final rule in this
matter in the Federal Register.
D. Executive Order 13175
This proposed rule has been analyzed
in accordance with the principles and
criteria contained in Executive Order
13175 (‘‘Consultation and Coordination
with Indian Tribal Governments’’).
Because this proposed rule does not
have tribal implications and does not
impose substantial direct compliance
costs on Indian tribal governments, the
funding and consultation requirements
of Executive Order 13175 do not apply,
and a tribal summary impact statement
is not required.
E. Regulatory Flexibility Act, Executive
Order 13272, and DOT Procedures and
Policies
The Regulatory Flexibility Act (5
U.S.C. 601 et seq.) requires an agency to
review regulations to assess their impact
on small entities unless the agency
determines the rule is not expected to
have a significant impact on a
substantial number of small entities.
This proposed rule would clarify
provisions based on PHMSA’s
initiatives and correspondence with the
regulated community. The proposed
changes are generally intended to
provide relief to shippers, carriers, and
packaging manufacturers, including
small entities, by easing overly
burdensome requirements with no
reduction in safety.
Consideration of alternative proposals
for small businesses. The Regulatory
Flexibility Act directs agencies to
establish exceptions and differing
compliance standards for small
businesses, where it is possible to do so
and still meet the objectives of
applicable regulatory statutes. In the
case of hazardous materials
transportation, it is not possible to
establish exceptions or differing
standards and still accomplish our
safety objectives.
The impact of this proposed rule is
not expected to be significant. The
proposed changes are generally
intended to provide relief to shippers,
carriers, and packaging manufactures
and testers, including small entities.
This relief will provide marginal
positive economic benefits to shippers,
carriers, and packaging manufactures
and testers, including small entities.
These benefits are not at a level that can
be considered economically significant;
E:\FR\FM\23JAP3.SGM
23JAP3
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
tkelley on DSK3SPTVN1PROD with PROPOSALS3
therefore, this proposed rule will not
have a significant economic impact on
a substantial number of small entities.
This proposed rule has been
developed in accordance with Executive
Order 13272 (‘‘Proper Consideration of
Small Entities in Agency Rulemaking’’)
and DOT’s procedures and policies to
promote compliance with the
Regulatory Flexibility Act to ensure that
potential impacts of draft rules on small
entities are properly considered.
F. Paperwork Reduction Act
PHMSA currently has an approved
information collection under Office of
Management and Budget (OMB) Control
Number 2137–0557, entitled
‘‘Approvals for Hazardous Materials.’’
This proposed rule does not propose
any changes that would affect the
burden for this or any other information
collection.
Prior to the publication of a final rule
entitled ‘‘Hazardous Materials:
Revisions to Fireworks Regulation’’
under Docket No. PHMSA–2010–0320
(HM–257) published in the Federal
Register on July, 6 2013 [78 FR 42457],
the HMR contained a requirement that
all certification agencies provide a
statement that it would perform its
functions independent of the owners
and manufacturers of the packagings in
its field. The burden for this
requirement was accounted for under
OMB Control Number 2137–0557.
However, the HM–257 final rule
inadvertently removed this language
from the HMR. Therefore, in this NPRM,
PHMSA is proposing to reinsert the
language for certification agencies to
confirm that they are independent and
not owned by a company in its field. For
ease of the reader, this language is being
proposed to be inserted as follows:
• PHMSA is proposing to revise
§ 107.402(f) to require that a portable
tank and MEGC certification agency
submit a statement indicating that the
agency is independent of and not owned
by a portable tank or MEGC
manufacturer, owner, or distributor as
part of the Portable tank and MECG
Certification Agency application.
• PHMSA is proposing to revise
§ 107.402(e) to require that a lighter
certification agency submit a statement
that the agency is independent of and
not owned by a lighter manufacturer,
distributor, import or export company,
or proprietorship as part of the Lighter
Certification Agency application.
• PHMSA is proposing to revise
§ 107.807 to require that person who
seeks to manufacture DOT specification
cylinders and special permit cylinders,
or perform chemical analysis and tests
of those cylinders outside the United
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
States submits a statement, as part of the
application, indicating that the
inspection agency is independent of and
not owned by a cylinder manufacturer,
owner, or distributor.
G. Regulation Identifier Number (RIN)
A regulation identifier number (RIN)
is assigned to each regulatory action
listed in the Unified Agenda of Federal
Regulations. The Regulatory Information
Service Center publishes the Unified
Agenda in April and October of each
year. The RIN number contained in the
heading of this document can be used
to cross-reference this action with the
Unified Agenda.
H. Unfunded Mandates Reform Act
This proposed rule does not impose
unfunded mandates under the
Unfunded Mandates Reform Act of
1995. It does not result in costs of
$141,300,000 or more to either state,
local, or tribal governments, in the
aggregate, or to the private sector, and
is the least burdensome alternative that
achieves the objective of the rule.
I. Environmental Assessment
The National Environmental Policy
Act of 1969, 42 U.S.C. 4321–4375,
requires that federal agencies analyze
proposed actions to determine whether
the action will have a significant impact
on the human environment. The
Council on Environmental Quality
(CEQ) regulations require federal
agencies to conduct an environmental
review considering (1) the need for the
proposed action, (2) alternatives to the
proposed action, (3) probable
environmental impacts of the proposed
action and alternatives, and (4) the
agencies and persons consulted during
the consideration process (40 CFR
1508.9(b)).
This NPRM would amend the
Hazardous Materials Regulations (HMR;
49 CFR parts 171–180) by making
miscellaneous revisions to update and
clarify certain regulatory requirements,
responds to seven petitions for
rulemaking submitted to PHMSA by
various stakeholders, and addresses two
NTSB recommendations. These
amendments are intended to promote
safety, regulatory relief, and clarity. The
proposed changes were identified
through an internal review of the HMR
as well as in response to
communications with various
stakeholders affected by the HMR,
through letters of interpretation and
editorial issues being brought to our
attention. These proposed minor
changes will clarify the HMR and
enhance safety, while offering net
economic benefits.
PO 00000
Frm 00019
Fmt 4701
Sfmt 4702
3805
This action is necessary to: (1) Fulfill
our statutory directive to promote
transportation safety; (2) fulfill our
statutory directive under the
Administrative Procedure Act (APA)
that requires Federal agencies to give
interested persons the right to petition
an agency to issue, amend, or repeal a
rule (5 U.S.C. 553(e)); (3) support
governmental efforts to provide
regulatory relief to the regulated
community; (4) address safety concerns
raised by the NTSB and remove
regulatory ambiguity identified by the
regulated community; and (5) simplify
and clarify the regulations in order to
promote understanding and compliance.
The intended effect of this action is to
enhance the safe transportation of
hazardous materials and, in
conjunction, clarify, simplify and relax
certain regulatory requirements for
carriers, shippers, and other
stakeholders. These regulatory revisions
will offer more efficient and effective
ways of achieving safe and secure
transportation of hazardous materials in
commerce.
Description of Action: Docket No.
PHMSA–2013–0225 (HM–218H), NPRM
Transportation of hazardous materials
in commerce is subject to requirements
in the HMR, issued under authority of
Federal hazardous materials
transportation law, codified at 49 U.S.C.
5001 et seq. To facilitate the safe and
efficient transportation of hazardous
materials in international commerce, the
HMR provide that both domestic and
international shipments of hazardous
materials may be offered for
transportation and transported under
provisions of the international
regulations.
In proposing this rulemaking, PHMSA
is considering the following
alternatives:
Alternative 1: No Action
If PHMSA chose this alternative, it
would not proceed with any rulemaking
on this subject and the current
regulatory standards would remain in
effect. This option would not address
outstanding petitions for rulemaking or
NTSB Safety Recommendations. We
rejected the no action alternative.
Alternative 2: Go Forward With the
Proposed Amendments to the HMR in
This NPRM
This alternative is the current
proposal as it appears in this NPRM,
applying to transportation of hazardous
materials by various modes (highway,
rail, vessel and aircraft). The proposed
amendments encompassed in this
alternative are more fully addressed in
E:\FR\FM\23JAP3.SGM
23JAP3
tkelley on DSK3SPTVN1PROD with PROPOSALS3
3806
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
the preamble and regulatory text
sections. However, they generally
include the following changes to the
HMR, grouped below for ease of
discussion:
Incorporation by Reference and Use of
International Standards:
• Remove the entry for CGA
Publication C–1.1 in Table 1 to § 171.7.
• Incorporate by reference in § 171.7
CGA Publication G–1.6, Standard for
Mobile Acetylene Trailer Systems,
Seventh Edition (responds to petition P–
1605 and two NTSB Safety
Recommendations, H–09–01 and H–09–
02).
• Incorporate by reference in § 171.7
AAR Manual of Standards and
Recommended Practices, Section C–III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars).
• Amend the marking requirements
for poisonous by inhalation shipments
transported in accordance with the
IMDG Code or TDG Regulations
(responds to petition for rulemaking P–
1591).
§ 172.101 Hazardous Materials Table
and § 172.102 Special Provisions:
• Remove the packing group II
designation for certain organic
peroxides, self-reactive substances and
explosives (responds to petition for
rulemaking P–1590).
• Revise the § 172.101 table to add
Special Provision B120 to column 7 for
the entry ‘‘Calcium nitrate, UN1454.’’
• Revise the entry for ‘‘Propellant,
solid, UN0501’’ to remove vessel
stowage provision 24E from column 10B
of the HMT.
• Revise the packing group II HMT
entry for UN 2920, Corrosive liquids,
flammable, n.o.s., to harmonize the
HMR with the UN Model Regulations,
IMDG Code and the ICAO TI by adding
a reference to § 173.154 to column 8A of
the HMT.
• Revise the entry for ‘‘Oxidizing
solid, corrosive, n.o.s., UN 3085, PG II’’
to harmonize the HMR with the UN
Model Regulations, the IMDG Code and
the ICAO TI by adding a reference to
§ 173.152 to column 8A of the HMT.
• Revise the HMT entries for
‘‘Trinitrophenol (picric acid), wetted,
with not less than 10 percent water by
mass, UN 3364’’ and ‘‘Trinitrophenol,
wetted with not less than 30 percent
water, by mass, UN 1344’’ to harmonize
the HMR with the UN Model
Regulations, IMDG Code, and the ICAO
TI to clarify that the 500 gram limit per
package does not apply to UN 1344 but
does apply to UN 3364.
• Revise Special Provision 136, for
Dangerous goods in machinery or
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
apparatus, in § 172.102 to include
reference to subpart G of part 173.
• Remove reference to obsolete
Special Provision 18 for the HMT entry
‘‘UN 1044, Fire extinguishers’’ and in
§ 180.209(j).
Hazard Communication (Marking,
Labeling, Placarding, Emergency
Response):
• Correct a reference in § 172.201 to
exceptions for the requirement to
provide an emergency response
telephone number on a shipping paper.
• Revise §§ 172.301(f), 172.326(d) and
172.328(e) to include the clarification
that the NOT-ODORIZED or NONODORIZED marking may appear on
packagings used for both unodorized
and odorized LPG, and remove the
effective date of October 1, 2006 if it
appears these paragraphs, as the
effective date has passed.
• Amend § 172.406(d) by expressly
authorizing the use of labels described
in subpart E with a dotted or solid line
outer border on a surface background of
contrasting color.
• Amend the address in
§ 172.407(d)(4)(ii) to read Standards and
Rulemaking Division, Pipeline and
Hazardous Materials Safety
Administration, U.S. Department of
Transportation, East Building, 1200
New Jersey Avenue SE., Washington,
DC 20590–0001.
• Clarify the marking size
requirements for an IBC that is labeled
instead of placarded by replacing the
bulk package marking reference in
§ 172.514(c) with the non-bulk marking
reference, § 172.301(a)(1).
• Require that emergency response
telephone numbers be displayed on
shipping papers numerically (responds
to petition for rulemaking P–1597).
Shipper Requirements:
• Revise § 173.4a(a) to clarify that
articles (including aerosols) are not
eligible for excepted quantity
reclassification under § 173.4a, although
some are eligible to be shipped as small
quantities by highway and rail in
§ 173.4.
• Revise § 173.21(e) to include the
prohibition of transporting or offering
for transport materials in the same
transport vehicle (e.g. trailer, rail car)
with another material, the mixing of
which is likely to cause a dangerous
evolution of heat, flammable or
poisonous gases or vapors, or to produce
corrosive materials.
• Clarify that the requirements
provided in paragraph
§ 173.24a(c)(1)(iv) do not apply to
limited quantities packaged in
accordance with § 173.27(f)(2).
PO 00000
Frm 00020
Fmt 4701
Sfmt 4702
• Clarify the quantity limits for mixed
contents packages prepared in
accordance with § 173.27(f)(2).
• Clarify the requirements applicable
to bulk transportation of combustible
liquids by adding § 173.150(f)(3)(xi)
stating that the registration requirements
in subpart G of part 107 is applicable
and revising §§ 173.150(f)(3)(ix) and
173.150(f)(3)(x) for punctuation
applicable to a listing of requirements.
• Require that certain shipments of
nitric acid utilizing glass inner
packagings be contained in intermediate
packaging (responds to petition for
rulemaking P–1601).
• Add a new paragraph (j) in
§ 173.159 to address the need for
provisions that allow shippers to
prepare for transport and offer into
transportation damaged wet electric
storage batteries.
• Revise § 173.166(e)(6) to add the
words ‘‘or cargo vessel.’’
• Revise §§ 173.170 and 173.171 by
changing the term motor vehicle to
transport vehicle to allow for motor
vehicles comprised of more than one
cargo-carrying body to carry 100 pounds
of black or smokeless powder reclassed
as Division 4.1 in each cargo-carrying
body instead of 100 lbs total in the
motor vehicle.
• Revise the provisions in
§ 173.199(a)(4) by removing the
reference to the steel rod impact test in
§ 178.609(h).
• Amend the bulk packaging section
reference in Column (8C) of the HMT
from § 173.240 to § 173.216 for the
entries NA2212, UN2212, and UN2590.
In addition, we are proposing to revise
paragraph (c)(1) in § 173.216 by
authorizing the use of bulk packages
prescribed in § 173.240.
• Amend § 173.306(k) to clarify that
aerosols shipped for recycling or
disposal by motor vehicle containing a
limited quantity are afforded the
applicable exceptions provided for
ORM–D materials granted under
§§ 173.306(i) and 173.156(b).
Modal Requirements (Air, Vessel, and
Highway):
• Create a new paragraph (d) in
§ 175.1, stating that this subchapter does
not apply to dedicated air ambulance,
firefighting, or search and rescue
operations.
• Correct § 175.8 by adding the
appropriate 14 CFR, Part 125 citations.
• Clarifying exceptions for
passengers, crewmembers, and air
operators in paragraphs (a)(18), (a)(22),
and (a)(24) of § 175.10.
• Clarify § 175.75(e)(2) by replacing
the word ‘‘located’’ with ‘‘certificated.’’
• Clarify § 176.30(a)(4) by replacing
the word ‘‘packaging’’ with ‘‘package.’’
E:\FR\FM\23JAP3.SGM
23JAP3
tkelley on DSK3SPTVN1PROD with PROPOSALS3
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
• Clarify that the loading restrictions
in § 177.835(c)(1) through (4) area
applicable to § 177.848(e).
Packaging design and requalification:
• Revise § 178.65(i)(1) to correctly
reference the manufacturer’s report
requirements in § 178.35(g).
• Clarify § 178.337–17(a) to eliminate
confusion of the name plate and
specification plate requirements.
• Correct an inadvertent editorial
error in the formula in § 178.345–3(c)(1).
• Include provisions consistent with
the non-bulk packaging and IBC
approval provisions for Large
Packagings in § 178.955.
• Clarify the applicability to subpart
E in § 180.401 by revising the term
‘‘person’’ to ‘‘hazmat employee or
hazmat employer.’’
• Extend the pressure test and
internal visual inspection test interval to
ten years for certain MC 331 cargo tanks
in dedicated propane delivery service
(responds to petition for rulemaking P–
1604).
• Clarify the requirements applicable
to the testing of pressure relief devices
for cargo tank motor vehicles (responds
to petition for rulemaking P–1609).
Probable Environmental Impacts of
the Alternatives:
Background: Hazardous materials are
substances that may pose a threat to
public safety or the environment during
transportation because of their physical,
chemical, or nuclear properties. The
hazardous materials regulatory system is
a risk management system that is
prevention-oriented and focused on
reducing the probability and quantity of
a hazardous material release. Hazardous
materials are categorized by hazard
analysis and experience into hazard
classes and packing groups. The
regulations require each shipper to
classify a material in accordance with
these hazard classes and packing
groups. The process of classifying a
hazardous material is itself a form of
hazard analysis. Further, the regulations
require the shipper to communicate a
material’s hazards through use of the
hazard class, packing group, and proper
shipping name on the shipping paper
and the use of labels on packages and
placards on transport vehicles. Thus,
the shipping paper, labels, and placards
communicate the most significant
findings of the shipper’s hazard
analysis. A hazardous material is
assigned to one of three packing groups
based upon its degree of hazard, from a
high hazard, Packing Group I to a low
hazard, Packing Group III material. The
quality, damage resistance, and
performance standards of the packaging
in each packing group are appropriate
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
for the hazards of the material
transported.
Under the HMR, hazardous materials
are transported by aircraft, vessel, rail,
and highway. The potential for
environmental damage or contamination
exists when packages of hazardous
materials are involved in accidents or en
route incidents resulting from cargo
shifts, valve failures, package failures,
loading, unloading, collisions, handling
problems, or deliberate sabotage. The
release of hazardous materials can cause
the loss of ecological resources (e.g.
wildlife habitats) and the contamination
of air, aquatic environments, and soil.
Contamination of soil can lead to the
contamination of ground water.
Compliance with the HMR substantially
reduces the possibility of accidental
release of hazardous materials.
When developing potential regulatory
requirements, PHMSA evaluates those
requirements to consider the
environmental impact of each
amendment. Specifically, PHMSA
evaluates the risk of release and
resulting environmental impact, risk to
human safety, including any risk to first
responders, longevity of the packaging,
and potential impact of a proposed
regulation in a defined area. We have
determined that most of the regulatory
changes proposed in this rulemaking are
editorial in nature. As such, these
amendments have no impact on the risk
of release and resulting environmental
impact, human safety, longevity of the
packaging, and none of these
amendments would be carried out in a
defined geographic area. General
possible environmental benefits, and
detriments, are discussed below.
Alternative 1: No Action
If PHMSA were to select the No
Action Alternative, current regulations
would remain in place, and no new
provisions would be added. However,
this option would not address
outstanding petitions for rulemaking,
NTSB Safety Recommendations or
consider amendments based on
PHMSA’s own initiatives intended to
update, clarify, or provide relief from
certain existing regulatory requirements.
Foregone efficiencies in the No Action
Alternative also include freeing up
limited resources to concentrate on
hazardous materials transportation
issues of potentially much greater
environmental impact.
Additionally, the Preferred
Alternative encompasses enhanced and
clarified regulatory requirements, which
would result in increased compliance
and fewer environmental and safety
incidents. Not adopting the proposed
environmental and safety requirements
PO 00000
Frm 00021
Fmt 4701
Sfmt 4702
3807
in the NPRM under the No Action
Alternative would result in a lost
opportunity for reducing environmental
and safety-related incidents.
Greenhouse gas emissions would
remain the same under the No Action
Alternative.
Alternative 2: Go Forward With the
Proposed Amendments to the HMR in
This NPRM
If PHMSA selects the provisions as
proposed in this NPRM, we believe that
safety and environmental risks would be
reduced and that protections to human
health and environmental resources
would be increased.
Enhanced environmental protection
will also be achieved through more
targeted and effective training. This
proposed set of amendments will
eliminate inconsistent hazardous
materials regulations, which hamper
compliance training efforts. By
maintaining consistency between these
international regulations and the HMR,
shippers and carriers are able to train
their hazardous materials employees in
a single set of requirements for
classification, packaging, hazard
communication, handling, and stowage,
thereby minimizing the possibility of
improperly preparing and transporting a
shipment of hazardous materials
because of differences between domestic
and international regulations. This
proposed set of amendments will create
more streamlined hazardous
regulations, resulting in compliance
training efforts which facilitate the
regulated community’s ability to comply
with the HMR. Potential environmental
impacts of each proposed group of
amendments in Alternative 2 (selected
for NPRM) are discussed individually
below.
Incorporation by Reference and Use of
International Standards:
PHMSA believes that this proposed
set of amendments, which will increase
standardization and consistency of
regulations, will result in greater
protection of human health and the
environment. Consistency between US
and international regulations enhances
the safety and environmental protection
of international hazardous materials
transportation through better
understanding of the regulations, an
increased level of industry compliance,
the smooth flow of hazardous materials
from origin to destination, and
consistent emergency response in the
event of a hazardous materials incident.
Incorporation of the CGA Publication G–
1.6, Standard for Mobile Acetylene
Trailer Systems, will mitigate acetylene
release and enhance environmental
protection during overturn incidents
E:\FR\FM\23JAP3.SGM
23JAP3
tkelley on DSK3SPTVN1PROD with PROPOSALS3
3808
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
and unloading. Incorporation of AAR
Manual of Standards and Recommended
Practices, Section C–III, Specifications
for Tank Cars, Specification M–1002
(AAR Specifications for Tank Cars) and
certain subsequent amendments will
update the previously incorporated
2000 edition ensuring increased safety
through compliance with revised tank
car standards.
Current greenhouse gas emissions
would be unaffected under this
proposed set of amendments.
Section 172.101 Hazardous Materials
Table and § 172.102 Special Provisions:
PHMSA believes that this proposed
set of amendments, which will increase
standardization and consistency of
regulations, will result in greater
protection of human health and the
environment. Consistency between U.S.
and international regulations enhances
the safety and environmental protection
of international hazardous materials
transportation through better
understanding of the regulations, an
increased level of industry compliance,
the smooth flow of hazardous materials
from their points of origin to their
points of destination, and consistent
emergency response in the event of a
hazardous materials incident. New and
revised entries to the HMT reflect
emerging technologies, and a need to
better describe or differentiate between
existing entries. These proposed
changes mirror changes in the
Dangerous Goods list of The 18th
Revised Edition of the UN Model
Regulations, the 2013–2014 ICAO TI
and the 37–14 amendments to the IMDG
Code. It is extremely important for the
domestic HMR to mirror the UN Model
Regulations, the ICAO TI, and the IMDG
Code with respect to the entries in the
HMT to ensure consistent naming
conventions across modes and
international borders.
The packing group assignment reflects
a degree of danger associated with a
particular material and identifies
appropriate packaging. However,
assignment of a packing group is not
appropriate in all cases (e.g. explosives,
gases, radioactive material). In such
cases the packing group does not
indicate a degree of danger and the
packaging requirements for those
materials are specified in the
appropriate section in part 173. The
proposed change to eliminate a packing
group designation for materials
classified as explosives and organic
peroxides specifically listed in the HMT
provides a level of consistency, without
diminishing environmental protection
and safety.
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
Current greenhouse gas emissions
would be unaffected under this
proposed set of amendments.
Hazard Communication (Marking,
Labeling, Placarding, Emergency
Response):
PHMSA believes that this proposed
set of amendments, which will provide
for enhanced hazard communication
(hazcom), will result in greater
protection of human health and the
environment. The proposed changes
communicate the nature of various
specialized packaging configurations to
package handlers and emergency
responders. The proposed amendments
would ensure that hazard markings are
visible, universally recognizable, and
that they contain all information needed
by emergency responders, thus resulting
in fewer incidents with impacts to the
environment and safety.
Similar to the above sets of
amendments, PHMSA believes that this
proposed set of amendments, which
will increase standardization and
consistency of regulations, will result in
greater protection of human health and
the environment. Consistency between
U.S. and international regulations
enhances the safety and environmental
protection of international hazardous
materials transportation through better
understanding of the regulations, an
increased level of industry compliance,
the smooth flow of hazardous materials
from their points of origin to their
points of destination, and consistent
emergency response in the event of a
hazardous materials incident.
Current greenhouse gas emissions
would be unaffected under this
proposed set of amendments.
Shipper Requirements:
PHMSA believes that this proposed
amendment, which will revise, clarify
and enhance current regulations, will
result in greater protection of human
health and the environment.
Compliance with the HMR will be
facilitated for shippers and transporters
of hazardous materials through
regulations which are easier to
understand and more streamlined.
Additionally, the revisions include
emphasis being placed in areas
requiring more attention.
Specific to this set of amendments,
improving the packaging requirements
applicable to glass packages of nitric
acid reduces the occurrences of fires
caused by broken inner containers and
enhances human health and
environmental protection. PHMSA
believes that the additional intermediate
packaging required by this particular
amendment will add another layer of
protection in preventing breakage,
leakage and fires. Additionally, this
PO 00000
Frm 00022
Fmt 4701
Sfmt 4702
particular amendment creates a more
streamlined and efficient HMR through
incorporation of a petition for
rulemaking, P–1601. A more
streamlined and efficient HMR allows
both regulators and the regulated
community to target limited resources at
the most pressing hazmat compliance
issues.
Current greenhouse gas emissions
would be unaffected under this
proposed set of amendments.
Modal Requirements (Air, Vessel, and
Highway):
PHMSA believes that this proposed
amendment, which will revise, clarify
and enhance current regulations, will
result in greater protection of human
health and the environment.
Compliance with the HMR will be
facilitated for air, vessel and highway
shippers and transporters of hazardous
materials through regulations which are
easier to understand and more
streamlined. Additionally, the revisions
include emphasis being placed in areas
requiring more attention.
Current greenhouse gas emissions
would be unaffected under this
proposed set of amendments.
Packaging design and requalification:
PHMSA believes that this proposed
amendment, which will revise, clarify
and enhance current regulations, will
result in greater protection of human
health and the environment.
Compliance with the HMR will be
facilitated for shippers and transporters
of hazardous materials through
regulations which are easier to
understand and more streamlined.
Additionally, the revisions include
emphasis being placed in areas
requiring more attention.
Specific to this set of amendments,
decreasing the required frequency for
pressure testing and visual inspection of
certain cargo tanks in dedicated propane
service by extending the requalification
period from five years to ten years will
ease the burden on regulators and the
regulated community. This test, which
requires significant equipment downtime and man-hours to perform, has
been shown to achieve no additional
safety or environmental protection
when performed at a five- versus a tenyear interval. Pressure testing requires a
significant amount of water usage.
Decreasing the testing frequency by half
will result in significant volumes of
water being conserved. Additionally,
this particular amendment creates a
more streamlined and efficient HMR
through incorporation of a petition for
rulemaking, P–1609. A more
streamlined and efficient HMR allows
both regulators and the regulated
community to target limited resources at
E:\FR\FM\23JAP3.SGM
23JAP3
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
the most pressing hazmat compliance
issues.
Current greenhouse gas emissions
would be unaffected under these
amendments.
Agencies Consulted
This NPRM would affect some
PHMSA stakeholders, including
hazardous materials shippers and
carriers by highway, rail, vessel, and
aircraft, as well as package
manufacturers and testers. PHMSA is
seeking comment on the environmental
assessment contained in this NPRM. In
addition, PHMSA specifically
coordinated with the following Federal
Agencies and modal partners:
• Department of Justice
• Environmental Protection Agency
• Health and Human Services
• Occupational Safety and Health
Administration
• Federal Aviation Administration
• Federal Motor Carrier Safety
Administration
• Federal Railroad Administration
• United States Coast Guard
tkelley on DSK3SPTVN1PROD with PROPOSALS3
Conclusion
PHMSA proposes to make
miscellaneous amendments to the HMR
based on comments from the regulated
community, NTSB recommendations,
and PHMSA’s own rulemaking
initiatives. The proposed amendments
are intended to update, clarify, or
provide relief from certain existing
regulatory requirements to promote
safer transportation practices; eliminate
unnecessary regulatory requirements;
facilitate international commerce; and
make these requirements easier to
understand. These proposed
clarifications of regulatory
requirements, if adopted, will foster a
greater level of compliance with the
HMR and thus, diminished levels of
hazardous materials transportation
incidents affecting the health and safety
of the environment. Therefore, the net
environmental impact of this proposal
will be positive.
J. Privacy Act
Anyone is able to search the
electronic form of any written
communications and comments
received into any of our dockets by the
name of the individual submitting the
document (or signing the document, if
submitted on behalf of an association,
business, labor union, etc.). You may
review DOT’s complete Privacy Act
Statement at https://www.dot.gov/
privacy.
K. International Trade Analysis
The Trade Agreements Act of 1979
(Pub. L. 96–39), as amended by the
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
3809
Uruguay Round Agreements Act (Pub.
L. 103–465), prohibits Federal agencies
from establishing any standards or
engaging in related activities that create
unnecessary obstacles to the foreign
commerce of the United States.
Pursuant to these Acts, establishing
standards is not considered an
unnecessary obstacle to the foreign
commerce of the United States, so long
as the standards have a legitimate
domestic objective, such as the
protection of safety, and do not operate
in a manner that excludes imports that
meet this objective. The statute also
requires consideration of international
standards and, where appropriate, that
they be the basis for U.S. standards.
PHMSA notes the purpose is to ensure
the safety of the American public, and
has assessed the effects of this rule to
ensure that it does not exclude imports
that meet this objective. As a result, this
proposed rule is not considered as
creating an unnecessary obstacle to
foreign commerce.
49 CFR Part 177
Hazardous materials transportation,
Loading and unloading, Segregation and
separation.
List of Subjects
PART 107—HAZARDOUS MATERIALS
PROGRAM PROCEDURES
49 CFR Part 107
Administrative practice and
procedure, Hazardous materials
transportation, Penalties, Reporting and
recordkeeping requirements.
49 CFR Part 171
Exports, Hazardous materials
transportation, Hazardous waste,
Imports, Incorporation by reference,
Reporting and recordkeeping
requirements.
49 CFR Part 172
Education, Hazardous materials
transportation, Hazardous waste,
Incorporation by reference, Labeling,
Markings, Packaging and containers,
Reporting and recordkeeping
requirements.
49 CFR Part 173
Hazardous materials transportation,
Incorporation by reference, Packaging
and containers, Radioactive materials,
Reporting and recordkeeping
requirements, Uranium.
49 CFR Part 175
Air carriers, Hazardous materials
transportation, Radioactive materials,
Reporting and recordkeeping
requirements.
49 CFR Part 176
Hazardous materials transportation,
Maritime carriers, Radioactive materials,
Reporting and recordkeeping
requirements.
PO 00000
Frm 00023
Fmt 4701
Sfmt 4702
49 CFR Part 178
Hazardous materials transportation,
Incorporation by reference, Motor
vehicle safety, Packaging and
containers, Reporting and recordkeeping
requirements.
49 CFR Part 179
Hazardous materials transportation,
Railroad safety, Reporting and
recordkeeping requirements.
49 CFR Part 180
Hazardous materials transportation,
Motor carriers, Motor vehicle safety,
Packaging and containers, Railroad
safety, Reporting and recordkeeping
requirements.
In consideration of the foregoing, we
propose to amend 49 CFR Chapter I as
follows:
1. The authority citation for part 107
continues to read as follows:
■
Authority: 49 U.S.C. 5101–5128, 44701;
101 section 4 (28 U.S.C. 2461 note); Pub. L.
104–121 sections 212–213; Pub. L. 104–134
section 31001; 49 CFR 1.81, 1.96 and 1.97.
2. In § 107.402, revise paragraphs
(d)(1)(i), (e), and (f) to read as follows:
■
§ 107.402 Application for designation as a
certification agency.
*
*
*
*
*
(d) * * *
(1) * * *
(i) Be a U.S. resident, or for a non-U.S.
resident, have a designated U.S. agent
representative as specified in § 105.40 of
this subchapter;
*
*
*
*
*
(e) Lighter Certification Agency. Prior
to examining and testing lighters
(UN1057) for compliance with the
requirements of § 173.308 of this
chapter a person must submit an
application to, and be approved by, the
Associate Administrator to act as a
lighter certification agency. In addition
to paragraph (b) of this section, the
application must include the following
information:
(1) The name and address of each
facility where lighters are examined and
tested;
(2) A detailed description of the
applicant’s qualifications and ability to
examine and test lighters and
certification that the requirements
specified by § 173.308 of this chapter
have been met; and
E:\FR\FM\23JAP3.SGM
23JAP3
3810
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
(3) A statement that the agency is
independent of and not owned by a
lighter manufacturer, distributor, import
or export company, or proprietorship.
(f) Portable tank and MEGC
Certification Agencies. Prior to
inspecting portable tanks or multielement gas containers (MEGCs) for
compliance with the requirements of
§ 180.605(k) of this chapter, performing
periodic testing, inspection and repair
of portable tanks specified in § 180.352
of this chapter, and approval of MEGCs
specified in § 178.74 of this chapter, a
person must submit an application to,
and be approved by, the Associate
Administrator to act as a certification
agency. In addition to paragraph (b) of
this section, the application must
provide the following information:
(1) A name and address of each
facility where the portable tank or
MEGC is examined and tested;
(2) A detailed description of the
applicant’s qualifications and ability to
examine and test portable tanks or
MEGCs and certify that the
requirements specified by § 178.273 of
this chapter, specifications for UN
portable tanks, or § 178.74 of this
chapter for the approval of MEGCs have
been met; and
(3) A statement indicating that the
agency is independent of and not owned
by a portable tank or MEGC
manufacturer, owner, or distributor.
■ 3. In § 107.807, revise paragraph (b)(3)
to read as follows:
§ 107.807 Approval of non-domestic
chemical analyses and tests.
*
*
*
*
*
(b) * * *
(3) The name of the independent
inspection agency to be used to certify
the analyses and tests and a statement
indicating that this inspection agency is
independent of and not owned by a
cylinder manufacturer, owner, or
distributor; and
*
*
*
*
*
PART 171—GENERAL INFORMATION,
REGULATIONS, AND DEFINITIONS
4. The authority citation for part 171
continues to read as follows:
tkelley on DSK3SPTVN1PROD with PROPOSALS3
■
Authority: 49 U.S.C. 5101–5128, 44701; 49
CFR 1.81 and 1.97; Pub. L. 101–410 section
4 (28 U.S.C. 2461 note); Pub. L. 104–134
section 31001.
5. In § 171.7:
a. Revise paragraph (k);
b. Redesignate paragraphs (n)(13)
through (21) as (n)(14) through (22) and
add new paragraph (n)(13); and
■ c. In paragraph (dd)(2)(ii), Table 1 to
49 CFR 171.7—Materials Not
Incorporated by Reference, entry for
■
■
■
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
‘‘Compressed Gas Association, Inc.,
4221 Walney Road, 5th Floor, Chantilly,
Virginia 20151’’ and the associated
entry for document ‘‘CGA C–1.1,
Personnel Training and Certification
Guidelines for Cylinder Requalification
By the Volumetric Expansion Method,
2004, First Edition’’ are removed.
The revisions read as follows:
§ 171.7
Reference material.
*
*
*
*
*
(k) Association of American
Railroads, American Railroads Building,
50 F Street NW., Washington, DC 20001:
telephone (877) 999–8824, https://
www.aarpublications.com/.
(1) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Chapter 1,
October 2013; into §§ 179.7, 179.24,
180.503, and 180.517.
(2) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Chapter 2,
April 2010; into §§ 179.7 and 180.503.
(3) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Chapter 3,
October, 2007; into §§ 179.7 and
180.503.
(4) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Chapter 5,
October, 2007; into §§ 179.7, 179.16 and
180.503.
(5) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Chapter 6,
July 2012; into §§ 179.7, 179.400–6, and
180.503.
(6) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Appendix
A, October 2013; into §§ 173.314, 179.7,
179.15, 179.300–15, 179.300–17,
179.400–20, and 180.503.
(7) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Appendix
B, January 2014; into §§ 179.7 and
180.503.
(8) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
PO 00000
Frm 00024
Fmt 4701
Sfmt 4702
Specification M–1002 (AAR
Specifications for Tank Cars), Appendix
C, October 2007; into §§ 179.7, 179.22,
179.220–26, 179.400–25, and 180.503.
(9) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Appendix
D, except for Sections 2.0, 4.1, 4.2, 4.3,
and 4.4, October 2013; into §§ 179.7,
180.503, and 180.509.
(10) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Appendix
E, April 2010; into §§ 173.31, 179.7,
179.20, 179.100–12, 179.100–14,
179.101–1, 179.103–5, 179.200–9, 179–
200–13, 179.200–17, 179.220–14,
179.220–18, and 180.503.
(11) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Appendix
L, October 2013; into §§ 179.7 and
180.503.
(12) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Appendix
M, July 2012; into §§ 179.7, 179.200–7,
179.201–6, 179.220–6, 179.220–7,
179.400–5, 179.400–8, 180.503, and
180.515.
(13) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Appendix
R, October 2007; into §§ 179.6, 179.7,
and 180.503.
(14) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Appendix
T, October 2007; into §§ 179.7 and
180.503.
(15) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Appendix
U, October 2013; into §§ 179.7 and
180.503.
(16) AAR Manual of Standards and
Recommended Practices, Section C—III,
Specifications for Tank Cars,
Specification M–1002 (AAR
Specifications for Tank Cars), Appendix
W, October 2007; into §§ 179.7,
179.100–9, 179.100–10, 179.100–13,
179.100–18, 179.102–1, 179.102–4,
179.102–17, 179.200–10, 179.200–11,
179.200–22, 179.220–10, 179.220–11,
E:\FR\FM\23JAP3.SGM
23JAP3
3811
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
tkelley on DSK3SPTVN1PROD with PROPOSALS3
179.300–9, 179.300–10, 179.400–5,
179.400–11, 179.400–12, 179.400–15,
179.400–18, and 180.503.
(17) AAR Manual of Standards and
Recommended Practices, Section I,
Specially Equipped Freight Car and
Intermodal Equipment, 1988, into
§ 174.55; 174.63.
(18) AAR Specifications for Design,
Fabrication and Construction of Freight
Cars, Volume 1, 1988, into § 179.16.
(19) AAR Standard 286; AAR Manual
of Standards and Recommended
Practices, Section C, Car Construction
Fundamentals and Details, Standard S–
286, Free/Unrestricted Interchange for
286,000 lb Gross Rail Load Cars
(Adopted 2002; Revised: 2003, 2005,
2006), into § 179.13.
*
*
*
*
*
(n) * * *
(13) CGA Pamphlet G–1.6 Standard
for Mobile Acetylene Trailer Systems,
2011, into § 173.301.
(14) CGA Pamphlet G–2.2, Guideline
Method for Determining Minimum of
0.2% Water in Anhydrous Ammonia,
1985, Second Edition, Reaffirmed 1997,
into § 173.315.
(15) CGA Pamphlet G–4.1, Cleaning
Equipment for Oxygen Service, 1985,
into § 178.338–15.
(16) CGA Pamphlet P–20, Standard
for the Classification of Toxic Gas
Mixtures, 1995, into § 173.115.
(17) CGA Pamphlet P–20, Standard
for the Classification of Toxic Gas
Mixtures, 2003, Third Edition, into
§ 173.115.
(18) CGA S–1.1, Pressure Relief
Device Standards—Part 1—Cylinders for
Compressed Gases, (with the exception
of paragraph 9.1.1.1), Twelfth Edition,
2005, into § 173.301, 173.304a 178.75.
(19) CGA Pamphlet S–1.2, Safety
Relief Device Standards Part 2—Cargo
and Portable Tanks for Compressed
Gases, 1980, into § 173.315; 173.318;
178.276; 178.277.
(20) CGA S–7, Method for Selecting
Pressure Relief Devices for Compressed
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
Gas Mixtures in Cylinders, 2005, into
§ 173.301.
(21) CGA Technical Bulletin TB–2,
Guidelines for Inspection and Repair of
MC–330 and MC–331 Cargo Tanks,
1980, into § 180.407; 180.413.
(22) CGA Technical Bulletin TB–25,
Design Considerations for Tube Trailers,
2008 Edition, into § 173.301.
*
*
*
*
*
■ 6. In § 171.22, paragraph (f)(1) is
revised to read as follows:
§ 171.22 Authorization and conditions for
the use of international standards and
regulations.
*
*
*
*
*
(f) Complete information and
certification. (1) Except for shipments
into the United States from Canada
conforming to § 171.12, each person
importing a hazardous material into the
United States must provide the shipper
and the forwarding agent at the place of
entry into the United States timely and
complete written information as to the
requirements of this subchapter
applicable to the particular shipment.
*
*
*
*
*
■ 7. In § 171.23, paragraphs
(b)(10)(iv)(A) and (B) are revised to read
follows:
§ 171.23 Requirements for specific
materials and packagings transported
under the ICAO Technical Instructions,
IMDG Code, Transport Canada TDG
Regulations, or the IAEA Regulations.
*
*
*
*
*
(b) * * *
(10) * * *
(iv) * * *
(A) For a package transported in
accordance with the IMDG Code in a
closed transport vehicle or freight
container, a label or placard conforming
to the IMDG Code specifications for a
‘‘Class 2.3’’ or ‘‘Class 6.1’’ label or
placard may be substituted for the
POISON GAS or POISON INHALATION
HAZARD label or placard, as
appropriate. The transport vehicle or
freight container must be marked with
PO 00000
Frm 00025
Fmt 4701
Sfmt 4702
the identification numbers for the
hazardous material in the manner
specified in § 172.313(c) of this
subchapter and placarded as required by
subpart F of part 172 of this subchapter.
(B) For a package transported in
accordance with the Transport Canada
TDG Regulations in a closed transport
vehicle or freight container, a label or
placard conforming to the TDG
Regulations specifications for a ‘‘Class
2.3’’ or ‘‘Class 6.1’’ label or placard may
be substituted for the POISON GAS or
POISON INHALATION HAZARD label
or placard, as appropriate. The transport
vehicle or freight container must be
marked with the identification numbers
for the hazardous material in the
manner specified in § 172.313(c) of this
subchapter and placarded as required by
subpart F of part 172 of this subchapter.
While in transportation in the United
States, the transport vehicle or freight
container may also be placarded in
accordance with the appropriate TDG
Regulations in addition to being
placarded with the POISON GAS or
POISON INHALATION HAZARD
placards.
*
*
*
*
*
PART 172—HAZARDOUS MATERIALS
TABLE, SPECIAL PROVISIONS,
HAZARDOUS MATERIALS
COMMUNICATIONS, EMERGENCY
RESPONSE INFORMATION, AND
TRAINING REQUIREMENTS
8. The authority citation for part 172
continues to read as follows:
■
Authority: 49 U.S.C. 5101–5128; 44701; 49
CFR 1.81 and 1.97.
9. In § 172.101, the Hazardous
Materials Table is amended by revising
entries under ‘‘[REVISE]’’ in the
appropriate alphabetical sequence to
read as follows:
■
§ 172.101 Purpose and use of hazardous
materials table.
*
E:\FR\FM\23JAP3.SGM
*
*
23JAP3
*
*
Hazardous materials descriptions and
proper shipping names
VerDate Sep<11>2014
(1)
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00026
Ammonium nitrate-fuel oil
mixture containing only
prilled ammonium nitrate
and fuel oil.
D ............
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
Ammunition, illuminating
with or without burster,
expelling charge or propelling charge.
Ammunition, illuminating
with or without burster,
expelling charge or propelling charge.
Ammunition, illuminating
with or without burster,
expelling charge or propelling charge.
Ammunition, incendiary liquid or gel, with burster,
expelling charge or propelling charge.
Ammonium picrate, dry or
wetted with less than 10
percent water, by mass.
Ammonium perchlorate ......
Ammonium nitrate, with
more than 0.2 percent
combustible substances,
including any organic
substance calculated as
carbon, to the exclusion
of any other added substance.
Air bag inflators, or Air bag
modules, or Seat-belt
pretensioners.
I .............
[REVISE].
(2)
Symbols
tkelley on DSK3SPTVN1PROD with PROPOSALS3
*
*
NA0331 ....
*
UN0503 ....
(4)
Identification
Nos.
*
UN0402 ....
*
1.1D ..........
*
UN0004 ....
*
UN0171 ....
UN0254 ....
UN0297 ....
UN0247 ....
*
1.1D ..........
*
UN0222 ....
*
1.5D ..........
*
1.4G ..........
*
(3)
Hazard
class or
division
*
1.1D ..........
*
1.2G ..........
1.3G ..........
23JAP3
1.4G ..........
1.3J ...........
...................
...................
...................
...................
...................
...................
...................
...................
...................
(5)
PG
1.3J ..............
1.4G .............
1.3G .............
*
1.2G .............
*
1.1D .............
*
1.1D .............
*
1.1D .............
*
1.5D .............
*
1.4G .............
*
(6)
Label codes
...................
...................
...................
*
...................
*
...................
*
107 ...........
*
...................
*
...................
*
161, A200
*
(7)
Special
provisions
(§ 172.102)
...................
...................
...................
*
...................
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
Exceptions
(8A)
*
Bulk
(9)
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
(8B)
Non-bulk
None .........
62 .............
62 .............
*
62 .............
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
(8C)
*
Forbidden
Forbidden
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
(9A)
Passenger
aircraft/rail
Forbidden
75 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
(9B)
Cargo aircraft only
Quantity limitations
(see §§ 173.27 and
175.75)
(8)
Packaging (§ 173.***)
§ 172.101—HAZARDOUS MATERIALS TABLE
(10)
05 .............
02 .............
03 .............
03 .............
04 .............
04 .............
04 .............
03 .............
02 .............
(10A)
Location
25, 23E.
25.
25.
25.
25, 5E,
19E.
25, 19E.
25, 19E.
25, 19E.
25.
(10B)
Other
Vessel stowage
3812
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00027
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
G ............
23JAP3
Ammunition, toxic with
burster, expelling charge,
or propelling charge.
Ammunition, tear-producing
with burster, expelling
charge or propelling
charge.
Ammunition, tear-producing
with burster, expelling
charge or propelling
charge.
Ammunition, tear-producing
with burster, expelling
charge or propelling
charge.
Ammunition smoke, white
phosphorus with burster,
expelling charge, or propelling charge.
Ammunition, smoke, white
phosphorus with burster,
expelling charge, or propelling charge.
Ammunition, smoke with or
without burster, expelling
charge or propelling
charge.
Ammunition, smoke with or
without burster, expelling
charge or propelling
charge.
Ammunition, smoke with or
without burster, expelling
charge or propelling
charge.
Ammunition, incendiary,
white phosphorus, with
burster, expelling charge
or propelling charge.
Ammunition, incendiary,
white phosphorus, with
burster, expelling charge
or propelling charge.
Ammunition, incendiary with
or without burster, expelling charge, or propelling
charge.
Ammunition, incendiary with
or without burster, expelling charge, or propelling
charge.
Ammunition, incendiary with
or without burster, expelling charge or propelling
charge.
Ammunition, practice ..........
Ammunition, practice ..........
Ammunition, proof ..............
tkelley on DSK3SPTVN1PROD with PROPOSALS3
*
UN0243 ....
UN0009 ....
1.3H ..........
UN0362 ....
UN0488 ....
UN0363 ....
UN0016 ....
UN0015 ....
*
UN0018 ....
1.4G ..........
UN0019 ....
UN0301 ....
*
UN0020 ....
*
1.2G ..........
UN0303 ....
1.3G ..........
1.2G ..........
UN0246 ....
*
1.2H ..........
1.3H ..........
*
UN0245 ....
1.4G ..........
1.3G ..........
1.4G ..........
UN0300 ....
1.3G ..........
1.4G ..........
UN0010 ....
1.2G ..........
UN0244 ....
*
1.2H ..........
1.3G ..........
1.4G ..........
*
1.2K ..........
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
*
1.2K, 6.1 ......
1.4G, 8, 6.1 ..
1.3G, 8, 6.1 ..
*
1.2G, 8, 6.1 ..
1.4G .............
1.3G .............
1.2G .............
1.3H .............
*
1.2H .............
1.4G .............
1.3G .............
1.4G .............
1.4G .............
1.3G .............
1.2G .............
1.3H .............
*
1.2H .............
*
...................
...................
...................
*
...................
...................
...................
...................
...................
*
...................
...................
...................
...................
...................
...................
...................
...................
*
...................
*
...................
...................
...................
*
...................
...................
...................
...................
...................
*
...................
...................
...................
...................
...................
...................
...................
...................
*
...................
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
*
None .........
62 .............
62 .............
*
62 .............
62 .............
62 .............
62 .............
62 .............
*
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
*
62 .............
*
Forbidden
Forbidden
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
*
Forbidden
Forbidden
75 kg ........
Forbidden
Forbidden
75 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
Forbidden
75 kg ........
75 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
05 .............
02 .............
03 .............
03 .............
02 .............
03 .............
03 .............
05 .............
05 .............
02 .............
03 .............
02 .............
02 .............
03 .............
03 .............
05 .............
05 .............
25, 14E,
15E,
17E.
25, 14E,
15E,
17E.
25, 17E.
25, 17E.
25, 14E,
15E,
17E.
25, 17E.
25, 17E.
25, 14E,
15E,
17E.
25, 14E,
15E,
17E.
25.
25.
25.
25.
25.
25.
25, 14E,
15E,
17E.
25, 14E,
15E,
17E.
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
3813
Hazardous materials descriptions and
proper shipping names
VerDate Sep<11>2014
19:36 Jan 22, 2015
G ............
Jkt 235001
PO 00000
Frm 00028
Articles, explosive, n.o.s .....
Articles, explosive, n.o.s .....
G ............
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
D ............
n.o.s
n.o.s
n.o.s
n.o.s
n.o.s
n.o.s
n.o.s
n.o.s
n.o.s
n.o.s
n.o.s
.....
.....
.....
.....
.....
.....
.....
.....
.....
.....
.....
23JAP3
Barium azide, dry or wetted
with less than 50 percent
water, by mass.
Articles, pyrotechnic for
technical purposes.
Articles, pyrotechnic for
technical purposes.
Articles, pyrotechnic for
technical purposes.
Articles, pyrotechnic for
technical purposes.
Articles, pyrotechnic for
technical purposes.
Asbestos .............................
Articles, pyrophoric .............
explosive,
explosive,
explosive,
explosive,
explosive,
explosive,
explosive,
explosive,
explosive,
explosive,
explosive,
G
G
G
G
G
G
G
G
G
G
G
............
............
............
............
............
............
............
............
............
............
............
Articles,
Articles,
Articles,
Articles,
Articles,
Articles,
Articles,
Articles,
Articles,
Articles,
Articles,
G ............
Articles, explosive, extremely insensitive or Articles, EEI.
Articles, explosive, n.o.s .....
Articles, explosive, n.o.s .....
Articles, explosive, n.o.s .....
Articles, explosive, n.o.s .....
Articles, explosive, n.o.s .....
Articles, explosive, n.o.s .....
............
............
............
............
............
............
Ammunition, toxic with
burster, expelling charge,
or propelling charge.
(1)
G
G
G
G
G
G
(2)
Symbols
tkelley on DSK3SPTVN1PROD with PROPOSALS3
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
..........
....
....
....
....
....
....
....
....
....
....
....
....
....
....
....
....
....
UN0428 ....
*
UN0380 ....
UN0462
UN0463
UN0464
UN0465
UN0466
UN0467
UN0468
UN0469
UN0470
UN0471
UN0472
UN0356 ....
UN0355 ....
UN0349
UN0350
UN0351
UN0352
UN0353
UN0354
*
UN0486 ....
UN0021 ....
(4)
Identification
Nos.
1.4S ..........
*
UN0224 ....
UN0432 ....
1.4G ..........
*
1.1A ..........
UN0431 ....
1.3G ..........
NA2212 ....
UN0430 ....
1.2G ..........
9 ...............
UN0429 ....
1.1G ..........
*
1.2L ..........
1.1C
1.1D
1.1E
1.1F
1.2C
1.2D
1.2E
1.2F
1.3C
1.4E
1.4F
1.3L ..........
1.2L ..........
1.4S
1.4B
1.4C
1.4D
1.4G
1.1L
*
1.6N ..........
1.3K ..........
(3)
Hazard
class or
division
...................
III ..............
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
(5)
PG
.............
.............
..............
..............
.............
.............
..............
..............
.............
..............
..............
*
1.1A, 6.1 ......
9 ...................
1.4S ..............
1.4G .............
1.3G .............
1.2G .............
1.1G .............
*
1.2L ..............
1.1C
1.1D
1.1E
1.1F
1.2C
1.2D
1.2E
1.2F
1.3C
1.4E
1.4F
1.3L ..............
1.2L ..............
1.4S ..............
1.4B ..............
1.4C .............
1.4D .............
1.4G .............
1.1L ..............
*
1.6N .............
1.3K, 6.1 ......
(6)
Label codes
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
*
111, 117 ...
156, IB8,
IP2, IP4.
...................
...................
...................
...................
...................
*
...................
101
101
101
101
101
101
101
101
101
101
101
101 ...........
101 ...........
101
101
101
101
101
101
*
...................
...................
(7)
Special
provisions
(§ 172.102)
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
*
None .........
155 ...........
None .........
None .........
None .........
None .........
None .........
*
None .........
None
None
None
None
None
None
None
None
None
None
None
None .........
None .........
None
None
None
None
None
None
*
None .........
...................
(8A)
Exceptions
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
62 .............
216 ...........
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62
62
62
62
62
62
62
62
62
62
62
62 .............
62 .............
62
62
62
62
62
62
62 .............
62 .............
(8B)
Non-bulk
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
*
None .........
216 ...........
None .........
None .........
None .........
None .........
None .........
*
None .........
None
None
None
None
None
None
None
None
None
None
None
None .........
None .........
None
None
None
None
None
None
*
None .........
None .........
(8C)
*
Forbidden
200 kg ......
25 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
25 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
*
Forbidden
Forbidden
(9A)
Passenger
aircraft/rail
Forbidden
200 kg ......
100 kg ......
75 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
Forbidden
Forbidden
Forbidden
100 kg ......
Forbidden
75 kg ........
75 kg ........
75 kg ........
Forbidden
Forbidden
Forbidden
(9B)
Cargo aircraft only
Quantity limitations
(see §§ 173.27 and
175.75)
Packaging (§ 173.***)
Bulk
(9)
(8)
§ 172.101—HAZARDOUS MATERIALS TABLE—Continued
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
05 .............
A ...............
01 .............
02 .............
03 .............
03 .............
03 .............
05 .............
04
04
04
05
04
04
04
05
04
03
05
05 .............
05 .............
01
05
02
02
02
02
03 .............
05 .............
(10A)
Location
25.
34, 40.
25.
25.
25.
25.
25, 14E,
15E,
17E.
25.
25.
25.
25.
25.
25.
25, 14E,
15E.
25, 14E,
15E.
25, 14E,
15E.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25, 14E,
15E,
17E.
(10B)
Other
Vessel stowage
(10)
3814
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
I .............
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00029
Fmt 4701
Sfmt 4702
*
UN0028 ....
UN0037
UN0038
UN0039
UN0299
*
9 ...............
1.1F
1.1D
1.2G
1.3G
*
UN0033 ....
UN0035 ....
1.1D ..........
UN0400 ....
UN0225
UN0268
UN0042
UN0283
1.1J ...........
1.2J ...........
1.1B
1.2B
1.1D
1.2D
*
UN0043 ....
E:\FR\FM\23JAP3.SGM
*
UN0049 ....
UN0050 ....
UN0326 ....
UN0413 ....
UN0014 ....
UN0327 ....
UN0338 ....
UN0328 ....
*
5.1 ............
*
1.1G ..........
1.3G ..........
1.1C ..........
1.2C ..........
1.4S ..........
1.3C ..........
1.4C ..........
1.2C ..........
Calcium nitrate ...................
Cartridges, flash .................
Cartridges, flash .................
Cartridges for weapons,
blank.
Cartridges for weapons,
blank.
Cartridges for weapons,
blank or Cartridges, small
arms, blank or Cartridges
for tools, blank.
Cartridges for weapons,
blank or Cartridges, small
arms, blank.
Cartridges for weapons,
blank or Cartridges, small
arms, blank.
Cartridges for weapons,
inert projectile.
*
UN1454 ....
*
1.1D ..........
....
....
....
....
UN0399 ....
1.2F ..........
..........
..........
..........
..........
UN0291 ....
1.2D ..........
UN0034 ....
*
1.1F ..........
....
....
....
....
*
UN2212 ....
1.1D ..........
..........
..........
..........
..........
UN0027 ....
*
1.1D ..........
Bursters, explosive .............
Bombs, with bursting
charge.
Bombs, with bursting
charge.
Bombs, with bursting
charge.
Bombs, with bursting
charge.
Bombs with flammable liquid, with bursting charge.
Bombs with flammable liquid, with bursting charge.
Boosters with detonator .....
Boosters with detonator .....
Boosters, without detonator
Boosters, without detonator
Blue asbestos (Crocidolite)
or Brown asbestos
(amosite, mysorite).
Bombs, photo-flash ............
Bombs, photo-flash ............
Bombs, photo-flash ............
Bombs, photo-flash ............
Black powder, compressed
or Gunpowder, compressed or Black powder,
in pellets or Gunpowder,
in pellets.
Black powder or Gunpowder, granular or as a
meal.
tkelley on DSK3SPTVN1PROD with PROPOSALS3
23JAP3
...................
...................
...................
...................
...................
...................
...................
...................
III ..............
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
II ...............
...................
...................
..............
..............
.............
.............
1.2C .............
1.4C .............
1.3C .............
None ............
1.2C .............
*
1.1G .............
1.3G .............
1.1C .............
*
5.1 ................
*
1.1D .............
1.1B
1.2B
1.1D
1.2D
1.2J ..............
1.1J ..............
1.2F ..............
1.2D .............
1.1D .............
*
1.1F ..............
1.1F ..............
1.1D .............
1.2G .............
1.3G .............
*
9 ...................
1.1D .............
*
1.1D .............
...................
...................
...................
...................
...................
*
...................
...................
...................
*
34, B120,
IB8, IP3,
T1, TP33.
*
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
*
...................
*
156, IB8,
IP2, IP4,
T3, TP33.
...................
...................
...................
...................
...................
*
...................
.........
.........
.........
.........
None .........
None .........
None .........
63 .............
None .........
*
None .........
None .........
None .........
*
152 ...........
*
None .........
None
None
None
None
...................
...................
...................
...................
...................
*
...................
...................
...................
...................
...................
*
155 ...........
None .........
*
None .........
.............
.............
.............
.............
.............
.............
.............
.............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
213 ...........
62 .............
62
62
62
62
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62
62
62
62
216 ...........
62 .............
62 .............
.........
.........
.........
.........
62 .............
None .........
None .........
None .........
None .........
*
None .........
None .........
None .........
*
240 ...........
*
None .........
None
None
None
None
None .........
None .........
None .........
62 .............
62 .............
*
None .........
None .........
62 .............
62 .............
62 .............
*
216 ...........
None .........
*
None .........
Forbidden
Forbidden
Forbidden
25 kg ........
Forbidden
*
Forbidden
Forbidden
Forbidden
*
25 kg ........
*
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
*
200 kg ......
Forbidden
*
Forbidden
Forbidden
75 kg ........
Forbidden
100 kg ......
Forbidden
Forbidden
75 kg ........
Forbidden
100 kg ......
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
200 kg ......
Forbidden
Forbidden
.............
.............
.............
.............
.............
.............
.............
.............
04 .............
02 .............
04 .............
01 .............
04 .............
03 .............
03 .............
04 .............
A.
04 .............
05
05
04
04
05 .............
05 .............
05 .............
04 .............
04 .............
05 .............
05
04
03
03
A ...............
04 .............
04 .............
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25, 23E.
25, 23E.
25.
25.
25.
25.
25.
25.
25.
25.
34, 40.
25.
25.
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
3815
Hazard
class or
division
Identification
Nos.
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00030
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
*
UN0055 ....
UN0379 ....
UN0446 ....
UN0447 ....
*
UN0457 ....
UN0458 ....
UN0459 ....
UN0460 ....
UN0048 ....
1.3C
1.4C
1.3C
1.4C
1.4S
1.2C
*
1.3G ..........
1.4G ..........
1.4S ..........
*
1.4S ..........
1.4C ..........
1.4C ..........
1.3C ..........
*
1.1D ..........
1.2D ..........
1.4D ..........
1.4S ..........
1.1D ..........
Cartridges for weapons,
inert projectile or Cartridges, small arms.
Cartridges for weapons,
inert projectile or Cartridges, small arms.
Cartridges for weapons,
inert projectile or Cartridges, small arms.
Cartridges for weapons,
with bursting charge.
Cartridges for weapons,
with bursting charge.
Cartridges for weapons,
with bursting charge.
Cartridges for weapons,
with bursting charge.
Cartridges for weapons,
with bursting charge.
Cartridges for weapons,
with bursting charge.
Cartridges, oil well ..............
Cartridges, oil well ..............
Cartridges, power device ...
Cartridges, power device ...
Cartridges, power device ...
Cartridges, power device ...
Cartridges, signal ...............
Cartridges, signal ...............
Cartridges, signal ...............
23JAP3
Charges, bursting, plastics
bonded.
Charges, bursting, plastics
bonded.
Charges, bursting, plastics
bonded.
Charges, bursting, plastics
bonded.
Charges, demolition ...........
Cases, cartridge, empty
with primer.
Cases, cartridges, empty
with primer.
Cases, combustible, empty,
without primer.
Cases, combustible, empty,
without primer.
*
UN0054 ....
UN0312 ....
UN0405 ....
1.4S ..........
(2)
(1)
UN0339 ....
UN0005 ....
1.3C ..........
UN0321 ....
1.2F ..........
1.2E ..........
UN0348 ....
UN0007 ....
1.1E ..........
UN0277
UN0278
UN0275
UN0276
UN0323
UN0381
....
....
....
....
....
....
1.4E ..........
..........
..........
..........
..........
..........
..........
UN0412 ....
1.4F ..........
UN0006 ....
1.1F ..........
UN0417 ....
1.4C ..........
UN0012 ....
(4)
(3)
Hazardous materials descriptions and
proper shipping names
Symbols
tkelley on DSK3SPTVN1PROD with PROPOSALS3
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
(5)
PG
.............
.............
.............
.............
..............
.............
1.1D .............
1.4S ..............
1.4D .............
1.2D .............
*
1.1D .............
1.3C .............
1.4C .............
1.4C .............
*
1.4S ..............
*
1.3G .............
1.4G .............
1.4S ..............
1.3C
1.4C
1.3C
1.4C
1.4S
1.2C
1.4E ..............
1.4F ..............
1.2E ..............
1.2F ..............
1.1E ..............
1.1F ..............
1.3C .............
1.4C .............
None ............
(6)
Label codes
...................
347 ...........
...................
...................
*
...................
...................
...................
50 .............
*
50 .............
*
...................
...................
...................
...................
...................
...................
110 ...........
110, 347 ...
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
(7)
Special
provisions
(§ 172.102)
None .........
None .........
None .........
None .........
*
None .........
None .........
None .........
None .........
*
63 .............
*
None .........
None .........
None .........
None .........
None .........
None .........
None .........
63 .............
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
63 .............
(8A)
Exceptions
.............
.............
.............
.............
.............
.............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62
62
62
62
62
62
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
(8B)
Non-bulk
.............
.............
.............
.............
.............
.............
62 .............
None .........
None .........
None .........
*
None .........
None .........
None .........
None .........
*
None .........
*
None .........
None .........
None .........
62
62
62
62
62
62
62 .............
None .........
62 .............
None .........
62 .............
None .........
None .........
None .........
None .........
(8C)
Forbidden
25 kg ........
Forbidden
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
*
25 kg ........
*
Forbidden
Forbidden
25 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
25 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
25 kg ........
(9A)
Passenger
aircraft/rail
Forbidden
100 kg ......
75 kg ........
Forbidden
Forbidden
Forbidden
75 kg ........
75 kg ........
100 kg ......
75 kg ........
75 kg ........
100 kg ......
Forbidden
75 kg ........
75 kg ........
75 kg ........
100 kg ......
Forbidden
75 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
100 kg ......
(9B)
Cargo aircraft only
Quantity limitations
(see §§ 173.27 and
175.75)
Packaging (§ 173.***)
Bulk
(9)
(8)
§ 172.101—HAZARDOUS MATERIALS TABLE—Continued
.............
.............
.............
.............
.............
.............
04 .............
01 .............
02 .............
04 .............
04 .............
04 .............
02 .............
02 .............
01 .............
03 .............
02 .............
01 .............
04
02
04
02
01
04
03 .............
05 .............
04 .............
05 .............
04 .............
05 .............
04 .............
02 .............
01 .............
(10A)
Location
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
(10B)
Other
Vessel stowage
(10)
3816
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00031
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
23JAP3
G ............
Cord, detonating, flexible ...
Cord, detonating, flexible ...
Cord detonating or Fuse
detonating metal clad.
Cord, detonating or Fuse,
detonating metal clad.
Cord, detonating, mild effect or Fuse, detonating,
mild effect metal clad.
Contrivances, water-activated, with burster, expelling charge or propelling charge.
Contrivances, water-activated, with burster, expelling charge or propelling charge.
G ............
G ............
G ............
G ............
Components, explosive
train, n.o.s.
Components, explosive
train, n.o.s.
Components, explosive
train, n.o.s.
Components, explosive
train, n.o.s.
G ............
Charges, explosive, commercial without detonator.
Charges, explosive, commercial without detonator.
Charges, explosive, commercial without detonator.
Charges, explosive, commercial without detonator.
Charges, propelling ............
Charges, propelling ............
Charges, propelling ............
Charges, propelling ............
Charges, propelling, for
cannon.
Charges, propelling, for
cannon.
Charges, propelling, for
cannon.
Charges, shaped, flexible,
linear.
Charges, shaped, flexible,
linear.
Charges, shaped, without
detonator.
Charges, shaped, without
detonator.
Charges, shaped, without
detonator.
Charges, shaped, without
detonator.
Charges, supplementary
explosive.
Charges, depth ...................
tkelley on DSK3SPTVN1PROD with PROPOSALS3
UN0444 ....
UN0443 ....
1.2D ..........
1.1C
1.3C
1.2C
1.4C
1.3C
UN0237 ....
UN0288 ....
1.4D ..........
1.1D ..........
UN0059 ....
UN0414 ....
1.2C ..........
UN0441 ....
UN0060 ....
*
UN0382 ....
1.4D ..........
1.4S ..........
1.1D ..........
*
1.2B ..........
UN0249 ....
*
UN0065 ....
UN0289 ....
UN0102 ....
UN0290 ....
UN0104 ....
*
1.1D ..........
1.4D ..........
1.2D ..........
1.1D ..........
1.4D ..........
*
UN0248 ....
*
1.2L ..........
1.3L ..........
UN0461 ....
UN0384 ....
1.1B ..........
1.4S ..........
UN0383 ....
UN0440 ....
1.2D ..........
1.4B ..........
UN0439 ....
1.1D ..........
UN0279 ....
1.1C ..........
....
....
....
....
....
UN0271
UN0272
UN0415
UN0491
UN0242
1.4S ..........
..........
..........
..........
..........
..........
UN0445 ....
1.4D ..........
UN0442 ....
*
UN0056 ....
*
1.1D ..........
1.1D ..........
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
.............
.............
.............
.............
.............
1.4D .............
1.1D .............
*
1.1D .............
1.4D .............
1.2D .............
1.3L ..............
*
1.2L ..............
1.1B ..............
1.4S ..............
1.4B ..............
*
1.2B ..............
1.1D .............
1.4S ..............
1.4D .............
1.2D .............
1.1D .............
1.1D .............
1.4D .............
1.2C .............
1.1C .............
1.1C
1.3C
1.2C
1.4C
1.3C
1.4S ..............
1.4D .............
1.2D .............
*
1.1D .............
1.1D .............
...................
...................
*
102 ...........
...................
...................
...................
*
...................
101 ...........
101 ...........
101 ...........
*
101 ...........
...................
347 ...........
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
347 ...........
...................
...................
*
...................
...................
.........
.........
.........
.........
.........
None .........
None .........
*
63(a) .........
None .........
None .........
None .........
*
None .........
None .........
None .........
None .........
*
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None
None
None
None
None
None .........
None .........
None .........
*
None .........
None .........
.............
.............
.............
.............
.............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62
62
62
62
62
62 .............
62 .............
62 .............
62 .............
62 .............
.........
.........
.........
.........
.........
None .........
None .........
*
None .........
None .........
None .........
None .........
*
None .........
None .........
None .........
None .........
*
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None
None
None
None
None
None .........
None .........
None .........
*
None .........
62 .............
Forbidden
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
*
Forbidden
Forbidden
25 kg ........
Forbidden
*
Forbidden
Forbidden
25 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
25 kg ........
Forbidden
Forbidden
*
Forbidden
Forbidden
75 kg ........
Forbidden
Forbidden
75 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
100 kg ......
75 kg ........
Forbidden
Forbidden
100 kg ......
75 kg ........
Forbidden
Forbidden
Forbidden
75 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
Forbidden
100 kg ......
75 kg ........
Forbidden
Forbidden
Forbidden
.............
.............
.............
.............
.............
02 .............
04 .............
04 .............
02 .............
04 .............
05 .............
05 .............
05 .............
01 .............
05 .............
05 .............
04 .............
01 .............
02 .............
04 .............
04 .............
04 .............
02 .............
04 .............
04 .............
04
04
04
02
04
01 .............
02 .............
04 .............
04 .............
04 .............
25.
25.
25.
25.
25.
25, 14E,
15E,
17E.
25, 14E,
15E,
17E.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
3817
Hazard
class or
division
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00032
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
23JAP3
Detonator assemblies, nonelectric for blasting.
Detonator assemblies, nonelectric, for blasting.
Detonator assemblies, nonelectric, for blasting.
Deflagrating metal salts of
aromatic nitroderivatives,
n.o.s.
Cyclotrimethylenetrinitramine, desensitized or Cyclonite, desensitized or
Hexogen, desensitized or
RDX, desensitized.
Cyclotrimethylenetrinitramine, wetted or Cyclonite,
wetted or Hexogen,
wetted or RDX, wetted
with not less than 15 percent water by mass.
Cyclotetramethylenetetranitramine, desensitized or
Octogen, desensitized or
HMX, desensitized.
Cyclotetramethylenetetranitramine, wetted or HMX,
wetted or Octogen,
wetted with not less than
15 percent water, by
mass.
Cutters, cable, explosive ....
*
UN0070 ....
*
UN2920 ....
UN0066 ....
(4)
Identification
Nos.
*
UN0483 ....
*
UN0132 ....
1.1D ..........
*
UN0360 ....
UN0361 ....
UN0500 ....
*
1.3C ..........
UN0072 ....
*
1.1D ..........
UN0226 ....
*
1.1D ..........
1.1D ..........
*
UN0484 ....
*
1.4S ..........
*
8 ...............
Cord, igniter ........................
Corrosive liquids, flammable, n.o.s.
1.4G ..........
(2)
(1)
G ............
(3)
Hazardous materials descriptions and
proper shipping names
Symbols
tkelley on DSK3SPTVN1PROD with PROPOSALS3
*
1.1B ..........
1.4B ..........
1.4S ..........
...................
...................
...................
...................
...................
...................
...................
...................
...................
II ...............
I ................
...................
(5)
PG
1.4S ..............
1.4B ..............
*
1.1B ..............
*
1.3C .............
1.1D .............
*
1.1D .............
1.1D .............
*
1.1D .............
*
1.4S ..............
8,3 ................
*
8, 3 ...............
1.4G .............
(6)
Label codes
347 ...........
103 ...........
*
...................
*
...................
...................
*
...................
...................
*
...................
*
...................
*
A6, B10,
T14,
TP2,
TP27.
B2, IB2,
T11,
TP2,
TP27.
...................
(7)
Special
provisions
(§ 172.102)
63(f), 63(g)
63(f), 63(g)
*
None .........
*
None .........
None .........
*
None .........
None .........
*
None .........
*
None .........
154 ...........
*
None .........
None .........
(8A)
Exceptions
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
202 ...........
201 ...........
62 .............
(8B)
Non-bulk
None .........
None .........
*
None .........
*
None .........
None .........
*
None .........
None .........
*
None .........
*
62 .............
243 ...........
*
243 ...........
None .........
(8C)
25 kg ........
Forbidden
*
Forbidden
*
Forbidden
Forbidden
*
Forbidden
Forbidden
*
Forbidden
*
25 kg ........
1 L ............
*
0.5 L .........
Forbidden
(9A)
Passenger
aircraft/rail
100 kg ......
75 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
100 kg ......
30 L ..........
2.5 L .........
75 kg ........
(9B)
Cargo aircraft only
Quantity limitations
(see §§ 173.27 and
175.75)
Packaging (§ 173.***)
Bulk
(9)
(8)
§ 172.101—HAZARDOUS MATERIALS TABLE—Continued
01 .............
05 .............
05 .............
04 .............
04 .............
04 .............
04 .............
04 .............
01 .............
C ...............
C ...............
02 .............
(10A)
Location
25.
25.
25.
25, 5E.
25.
25.
25.
25.
25.
25, 40.
25, 40.
25.
(10B)
Other
Vessel stowage
(10)
3818
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00033
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
23JAP3
Explosive, blasting, type B
Explosive, blasting, type B
or Agent blasting, Type B.
Explosive, blasting, type C
Explosive, blasting, type D
Explosive, blasting, type A
Dipicryl sulfide, dry or
wetted with less than 10
percent water, by mass.
Dinitrosobenzene ................
Dinitroresorcinol, dry or
wetted with less than 15
percent water, by mass.
Dinitrophenolates alkali
metals, dry or wetted with
less than 15 percent
water, by mass.
Dinitrophenol, dry or wetted
with less than 15 percent
water, by mass.
Dinitroglycoluril or Dingu ....
Diethyleneglycol dinitrate,
desensitized with not less
than 25 percent non-volatile water-insoluble
phlegmatizer, by mass.
Diazodinitrophenol, wetted
with not less than 40 percent water or mixture of
alcohol and water, by
mass.
Detonators, electric, for
blasting.
Detonators, electric, for
blasting.
Detonators, electric for
blasting.
Detonators for ammunition
Detonators for ammunition
Detonators for ammunition
Detonators for ammunition
Detonators, non-electric, for
blasting.
Detonators, non-electric, for
blasting.
Detonators, non-electric, for
blasting.
tkelley on DSK3SPTVN1PROD with PROPOSALS3
UN0030 ....
UN0073
UN0364
UN0365
UN0366
UN0029
1.4S ..........
1.1B
1.2B
1.4B
1.4S
1.1B
*
UN0074 ....
*
1.1A ..........
*
UN0077 ....
*
UN0076 ....
*
UN0489 ....
UN0082 ....
UN0331 ....
UN0083 ....
UN0084 ....
1.1D ..........
1.1D ..........
*
UN0081 ....
*
1.1D ..........
1.1D ..........
1.5D ..........
UN0401 ....
*
*
1.1D ..........
*
UN0406 ....
*
1.1D ..........
*
1.3C ..........
*
UN0078 ....
*
1.3C ..........
*
1.1D ..........
*
1.1D ..........
*
UN0075 ....
UN0455 ....
1.4S ..........
*
1.1D ..........
UN0267 ....
1.4B ..........
....
....
....
....
....
UN0456 ....
1.4B ..........
..........
..........
..........
..........
..........
UN0255 ....
1.1B ..........
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
..............
..............
..............
..............
..............
1.1D .............
1.1D .............
1.1D .............
1.5D .............
*
1.1D .............
*
1.1D .............
*
1.3C .............
*
1.1D .............
*
1.3C, 6.1 ......
*
1.1D, 6.1 ......
*
1.1D .............
*
1.1D .............
*
1.1A ..............
1.4S ..............
1.4B ..............
1.1B
1.2B
1.4B
1.4S
1.1B
1.4S ..............
1.4B ..............
1.1B ..............
...................
123 ...........
...................
...................
105, 106 ...
*
...................
*
...................
*
...................
*
...................
*
...................
*
...................
*
...................
*
...................
*
111, 117 ...
347 ...........
103 ...........
...................
...................
103 ...........
347 ...........
...................
347 ...........
103 ...........
63(f), 63(g)
.........
.........
.........
.........
.........
None .........
None .........
None .........
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
63(f), 63(g)
63(f), 63(g)
None
None
None
None
None
63(f), 63(g)
63(f), 63(g)
62 .............
.............
.............
.............
.............
.............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62
62
62
62
62
62 .............
62 .............
None .........
.........
.........
.........
.........
.........
None .........
None .........
None .........
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
None .........
None .........
None
None
None
None
None
None .........
None .........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
25 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
25 kg ........
Forbidden
25 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
100 kg ......
75 kg ........
Forbidden
Forbidden
75 kg ........
100 kg ......
Forbidden
100 kg ......
75 kg ........
.............
.............
.............
.............
.............
04 .............
04 .............
04 .............
03 .............
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
05 .............
01 .............
05 .............
05
05
05
01
05
01 .............
05 .............
05 .............
25, 22E.
25.
25, 19E,
21E.
25, 19E.
25, 19E.
25.
25.
25, 5E.
25, 5E.
25, 5E.
25.
25, 21E.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
3819
Hazard
class or
division
VerDate Sep<11>2014
19:36 Jan 22, 2015
Explosive, blasting, type E
Explosive, blasting, type E
or Agent blasting, Type E.
Jkt 235001
PO 00000
Frm 00034
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
23JAP3
Fuzes, detonating ...............
Fuzes, detonating ...............
Fuzes, detonating ...............
Fuzes, detonating ...............
Fuzes, detonating, with protective features.
Fuse, igniter tubular metal
clad.
Fuse, non-detonating instantaneous or
quickmatch.
Fuse, safety ........................
Fracturing devices, explosive, without detonators
for oil wells.
*
UN0103 ....
UN0106
UN0107
UN0257
UN0367
UN0408
*
....
....
....
....
....
1.4S ..........
..........
..........
..........
..........
..........
UN0105 ....
1.3G ..........
*
1.1B
1.2B
1.4B
1.4S
1.1D
UN0101 ....
*
1.4G ..........
*
UN0099 ....
....
....
....
....
....
*
1.1D ..........
*
....
....
....
....
....
*
UN0094 ....
UN0305 ....
UN0093
UN0403
UN0404
UN0420
UN0421
*
*
1.1G ..........
1.3G ..........
..........
..........
..........
..........
..........
UN0333
UN0334
UN0335
UN0336
UN0337
Flash powder ......................
Flash powder ......................
*
1.3G
1.4G
1.4S
1.1G
1.2G
..........
..........
..........
..........
..........
*
UN0092 ....
UN0418 ....
UN0419 ....
.......................
.......................
.......................
.......................
.......................
*
1.1G
1.2G
1.3G
1.4G
1.4S
*
1.3G ..........
1.1G ..........
1.2G ..........
aerial
aerial
aerial
aerial
aerial
............................
............................
............................
............................
............................
*
UN1044 ....
UN0241 ....
UN0332 ....
(4)
Identification
Nos.
Flares, surface ....................
Flares, surface ....................
Flares, surface ....................
Flares,
Flares,
Flares,
Flares,
Flares,
Fireworks
Fireworks
Fireworks
Fireworks
Fireworks
*
2.2 ............
1.1D ..........
1.5D ..........
(2)
(1)
Fire extinguishers containing compressed or
liquefied gas.
(3)
Hazardous materials descriptions and
proper shipping names
Symbols
tkelley on DSK3SPTVN1PROD with PROPOSALS3
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
(5)
PG
*
1.1B
1.2B
1.4B
1.4S
1.1D
..............
..............
..............
..............
.............
1.4S ..............
1.3G .............
*
1.4G .............
*
1.1D .............
*
1.1G .............
1.3G .............
*
1.3G .............
1.1G .............
1.2G .............
*
1.3G .............
1.4G .............
1.4S ..............
1.1G .............
1.2G .............
*
1.1G .............
1.2G .............
1.3G .............
1.4G .............
1.4S ..............
*
2.2 ................
1.1D .............
1.5D .............
(6)
Label codes
*
...........
...........
...........
...........
...........
*
...................
...................
116 ...........
116 ...........
...................
...................
...................
*
...................
*
...................
*
...................
...................
*
...................
...................
...................
*
...................
...................
...................
...................
...................
108
108
108
108
108
*
110 ...........
...................
105, 106 ...
(7)
Special
provisions
(§ 172.102)
*
.........
.........
.........
.........
.........
*
.........
.........
.........
.........
.........
None
None
None
None
None
*
.........
.........
.........
.........
.........
None .........
None .........
*
None .........
*
None .........
*
None .........
None .........
*
None .........
None .........
None .........
None
None
None
None
None
None
None
None
None
None
*
309 ...........
None .........
None .........
(8A)
Exceptions
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
62
62
62
62
62
.............
.............
.............
.............
.............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62
62
62
62
62
62
62
62
62
62
309 ...........
62 .............
62 .............
(8B)
Non-bulk
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
*
None
None
None
None
None
.........
.........
.........
.........
.........
None .........
None .........
*
None .........
*
62 .............
*
None .........
None .........
*
None .........
None .........
None .........
*
None
None
None
None
None
*
None
None
None
None
None
*
None .........
None .........
None .........
(8C)
*
Forbidden
Forbidden
Forbidden
25 kg ........
Forbidden
25 kg ........
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
Forbidden
*
Forbidden
Forbidden
Forbidden
*
Forbidden
Forbidden
25 kg ........
Forbidden
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
25 kg ........
*
75 kg ........
Forbidden
Forbidden
(9A)
Passenger
aircraft/rail
Forbidden
Forbidden
75 kg ........
100 kg ......
Forbidden
100 kg ......
Forbidden
75 kg ........
Forbidden
Forbidden
Forbidden
75 kg ........
Forbidden
Forbidden
75 kg ........
75 kg ........
100 kg ......
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
100 kg ......
150 kg ......
Forbidden
Forbidden
(9B)
Cargo aircraft only
Quantity limitations
(see §§ 173.27 and
175.75)
Packaging (§ 173.***)
Bulk
(9)
(8)
§ 172.101—HAZARDOUS MATERIALS TABLE—Continued
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
05
05
05
01
04
.............
.............
.............
.............
.............
01 .............
03 .............
02 .............
04 .............
03 .............
03 .............
03 .............
03 .............
03 .............
03
02
01
03
03
03
03
03
02
01
A.
04 .............
03 .............
(10A)
Location
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25, 19E.
25, 19E.
(10B)
Other
Vessel stowage
(10)
3820
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00035
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
UN0409 ....
*
UN0284 ....
UN0285 ....
UN0292 ....
1.3G ..........
1.4G ..........
1.4S ..........
*
1.1D ..........
1.2D ..........
1.1F ..........
UN0293 ....
UN0316 ....
UN0317 ....
UN0368 ....
1.4D ..........
UN0372 ....
1.3G ..........
1.2G ..........
UN0452 ....
UN0318 ....
*
1.4S ..........
*
UN0079 ....
*
UN0392 ....
*
1.1D ..........
*
UN0114 ....
*
1.1A ..........
*
1.1A ..........
*
UN0113 ....
1.4G ..........
*
UN0110 ....
1.2F ..........
UN0410 ....
1.2D ..........
23JAP3
................................
................................
................................
................................
................................
*
....
....
....
....
....
*
1.1G
1.2G
1.3G
1.4G
1.4S
Igniters
Igniters
Igniters
Igniters
Igniters
UN0121
UN0314
UN0315
UN0325
UN0454
*
1.1D ..........
Hexotonal ...........................
..........
..........
..........
..........
..........
*
UN0393 ....
*
1.1D ..........
Hexolite, or Hexotol dry or
wetted with less than 15
percent water, by mass.
*
UN0118 ....
*
1.1D ..........
Hexanitrostilbene ................
Hexanitrodiphenylamine or
Dipicrylamine or Hexyl.
Guanyl
nitrosaminoguanyltetrazene, wetted or Tetrazene,
wetted with not less than
30 percent water or mixture of alcohol and water,
by mass.
Guanyl
nitrosaminoguanylidene
hydrazine, wetted with
not less than 30 percent
water, by mass.
Grenades, practice, hand or
rifle.
Grenades, practice, hand or
rifle.
Grenades, practice, hand or
rifle.
Grenades practice, hand or
rifle.
Grenades, hand or rifle,
with bursting charge.
Grenades, hand or rifle,
with bursting charge.
Grenades, hand or rifle,
with bursting charge.
Grenades, hand or rifle,
with bursting charge.
Fuzes, detonating, with protective features.
Fuzes, detonating, with protective features.
Fuzes, igniting ....................
Fuzes, igniting ....................
Fuzes, igniting ....................
tkelley on DSK3SPTVN1PROD with PROPOSALS3
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
*
1.1G .............
1.2G .............
1.3G .............
1.4G .............
1.4S ..............
*
1.1D .............
*
1.1D .............
*
1.1D .............
*
1.1D .............
*
1.1A ..............
*
1.1A ..............
1.4G .............
1.2G .............
1.3G .............
*
1.4S ..............
1.2F ..............
1.1F ..............
1.2D .............
*
1.1D .............
1.3G .............
1.4G .............
1.4S ..............
1.4D .............
1.2D .............
...................
*
...................
...................
...................
...................
...................
*
...................
*
...................
*
...................
*
...................
*
111, 117 ...
*
111, 117 ...
...................
...................
...................
*
...................
...................
...................
...................
*
...................
...................
...................
...................
116 ...........
None .........
None
None
None
None
None
*
.........
.........
.........
.........
.........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
...................
...................
...................
*
...................
...................
...................
...................
*
...................
None .........
None .........
None .........
None .........
62 .............
62
62
62
62
62
.............
.............
.............
.............
.............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
None .........
*
None
None
None
None
None
.........
.........
.........
.........
.........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
None .........
None .........
None .........
*
None .........
None .........
None .........
None .........
*
None .........
None .........
None .........
None .........
None .........
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
25 kg ........
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
*
25 kg ........
Forbidden
Forbidden
Forbidden
*
Forbidden
Forbidden
Forbidden
25 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
100 kg ......
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
Forbidden
Forbidden
100 kg ......
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
100 kg ......
75 kg ........
04 .............
03
03
03
02
01
.............
.............
.............
.............
.............
04 .............
04 .............
04 .............
04 .............
05 .............
05 .............
02 .............
03 .............
03 .............
01 .............
05 .............
05 .............
04 .............
04 .............
03 .............
02 .............
01 .............
02 .............
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
3821
Hazardous materials descriptions and
proper shipping names
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
D ............
Frm 00036
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
23JAP3
Mines with bursting charge
Mines with bursting charge
Mercury fulminate, wetted
with not less than 20 percent water, or mixture of
alcohol and water, by
mass.
5-Mercaptotetrazol-1-acetic
acid.
Mannitol hexanitrate,
wetted or Nitromannite,
wetted with not less than
40 percent water, or mixture of alcohol and water,
by mass.
Lighters, fuse ......................
Lead styphnate, wetted or
Lead trinitroresorcinate,
wetted with not less than
20 percent water or mixture of alcohol and water,
by mass.
Lead azide, wetted with not
less than 20 percent
water or mixture of alcohol and water, by mass.
Jet perforating guns,
charged oil well, with detonator.
Jet perforating guns,
charged oil well, with detonator.
Jet perforating guns,
charged, oil well, without
detonator.
Jet perforating guns,
charged oil well, without
detonator.
(1)
D ............
(2)
Symbols
tkelley on DSK3SPTVN1PROD with PROPOSALS3
UN0494 ....
*
UN0131 ....
*
UN0130 ....
*
UN0448 ....
*
1.1D ..........
*
UN0135 ....
*
UN0136 ....
UN0137 ....
*
1.4C ..........
*
UN0133 ....
*
1.4S ..........
*
1.1A ..........
*
UN0129 ....
1.1D ..........
*
1.1A ..........
UN0124 ....
1.4D ..........
NA0494 ....
*
NA0124 ....
*
1.1D ..........
1.4D ..........
(4)
Identification
Nos.
(3)
Hazard
class or
division
*
1.1A ..........
*
1.1F ..........
1.1D ..........
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
(5)
PG
*
1.1F ..............
1.1D .............
*
1.1A ..............
*
1.4C .............
*
1.1D .............
*
1.4S ..............
*
1.1A ..............
*
1.1A ..............
1.1D .............
1.4D .............
1.4D .............
*
1.1D .............
(6)
Label codes
*
...................
...................
*
111, 117 ...
*
...................
*
121 ...........
*
...................
*
111, 117 ...
*
111, 117 ...
55 .............
55, 114 .....
55, 56 .......
*
55, 56 .......
(7)
Special
provisions
(§ 172.102)
*
...................
...................
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
None .........
None .........
None .........
*
None .........
(8A)
Exceptions
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
(8B)
Non-bulk
*
None .........
62 .............
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
None .........
None .........
None .........
*
None .........
(8C)
*
Forbidden
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
25 kg ........
*
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
*
Forbidden
(9A)
Passenger
aircraft/rail
Forbidden
Forbidden
Forbidden
75 kg ........
Forbidden
100 kg ......
Forbidden
Forbidden
Forbidden
300 kg ......
Forbidden
Forbidden
(9B)
Cargo aircraft only
Quantity limitations
(see §§ 173.27 and
175.75)
Packaging (§ 173.***)
Bulk
(9)
(8)
§ 172.101—HAZARDOUS MATERIALS TABLE—Continued
05 .............
04 .............
05 .............
02 .............
04 .............
01 .............
05 .............
05 .............
04 .............
02 .............
02 .............
04 .............
(10A)
Location
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
(10B)
Other
Vessel stowage
(10)
3822
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
D ............
D ............
VerDate Sep<11>2014
UN0138 ....
UN0294 ....
*
UN0147 ....
*
1.4C ..........
1.4S ..........
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00037
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
23JAP3
Nitrotriazolone or NTO .......
Nitrostarch, dry or wetted
with less than 20 percent
water, by mass.
Nitroguanidine or Picrite,
dry or wetted with less
than 20 percent water, by
mass.
Nitroglycerin, solution in alcohol, with more than 1
percent but not more
than 10 percent nitroglycerin.
Nitroglycerin, desensitized
with not less than 40 percent non-volatile water insoluble phlegmatizer, by
mass.
Nitrocellulose, unmodified
or plasticized with less
than 18 percent plasticizing substance, by
mass.
Nitrocellulose, wetted with
not less than 25 percent
alcohol, by mass.
Nitrocellulose, plasticized
with not less than 18 percent plasticizing substance, by mass.
UN0342 ....
*
UN0341 ....
*
1.1D ..........
*
UN0282 ....
*
UN0144 ....
*
1.1D ..........
*
UN0146 ....
*
UN0490 ....
*
1.1D ..........
*
UN0143 ....
1.3C ..........
*
1.1D ..........
*
UN0343 ....
*
1.1D ..........
*
1.3C ..........
*
UN0340 ....
*
1.1D ..........
5-Nitrobenzotriazol .............
Nitrocellulose, dry or wetted
with less than 25 percent
water (or alcohol), by
mass.
*
UN0385 ....
*
1.1D ..........
*
NA0276 ....
NA0323 ....
1.2D ..........
1.2F ..........
Nitro urea ............................
Model rocket motor ............
Model rocket motor ............
Mines with bursting charge
Mines with bursting charge
tkelley on DSK3SPTVN1PROD with PROPOSALS3
*
1.1D ..........
*
1.1D ..........
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
*
1.1D .............
*
1.1D .............
*
1.1D .............
*
1.1D .............
*
1.1D, 6.1 ......
1.3C .............
*
1.1D .............
*
1.3C .............
*
1.1D .............
*
1.1D .............
*
1.1D .............
*
1.4C .............
1.4S ..............
1.2D .............
1.2F ..............
*
...................
*
...................
*
...................
*
...................
*
125 ...........
...................
*
...................
*
...................
*
...................
*
...................
*
...................
*
51 .............
51 .............
...................
...................
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
None .........
...................
...................
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
*
None .........
None .........
62 .............
None .........
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
25 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
100 kg ......
Forbidden
Forbidden
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
02 .............
01 .............
04 .............
05 .............
25.
25.
25.
25, 21E.
25, 21E.
25.
25, 27E.
25.
25, 27E.
25.
25.
25.
25.
25.
25.
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
3823
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00038
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
23JAP3
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
Symbols
Organic peroxide type B,
liquid.
Organic peroxide type B,
liquid, temperature controlled.
Organic peroxide type B,
solid.
Organic peroxide type B,
solid, temperature controlled.
Organic peroxide type C,
liquid.
Organic peroxide type C,
liquid, temperature controlled.
Organic peroxide type C,
solid.
Organic peroxide type C,
solid, temperature controlled.
Organic peroxide type D,
liquid.
Organic peroxide type D,
liquid, temperature controlled.
Organic peroxide type D,
solid.
Organic peroxide type D,
solid, temperature controlled.
Organic peroxide type E,
liquid.
Organic peroxide type E,
liquid, temperature controlled.
Organic peroxide type E,
solid.
Organic peroxide type E,
solid, temperature controlled.
Organic peroxide type F,
liquid.
Organic peroxide type F,
liquid, temperature controlled.
Organic peroxide type F,
solid.
Octolite or Octol, dry or
wetted with less than 15
percent water, by mass.
Hazardous materials descriptions and
proper shipping names
tkelley on DSK3SPTVN1PROD with PROPOSALS3
Identification
Nos.
UN3119 ....
UN3110 ....
5.2 ............
UN3109 ....
UN3118 ....
UN3108 ....
UN3117 ....
UN3107 ....
UN3116 ....
UN3106 ....
UN3115 ....
UN3105 ....
UN3114 ....
UN3104 ....
UN3113 ....
UN3103 ....
UN3112 ....
UN3102 ....
UN3111 ....
5.2 ............
5.2 ............
5.2 ............
5.2 ............
5.2 ............
5.2 ............
5.2 ............
5.2 ............
5.2 ............
5.2 ............
5.2 ............
5.2 ............
5.2 ............
5.2 ............
5.2 ............
5.2 ............
5.2 ............
*
UN3101 ....
*
1.1D ..........
*
5.2 ............
*
UN0266 ....
Hazard
class or
division
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
PG
5.2 ................
5.2 ................
5.2 ................
5.2 ................
5.2 ................
5.2 ................
5.2 ................
5.2 ................
5.2 ................
5.2 ................
5.2 ................
5.2 ................
5.2 ................
5.2 ................
5.2 ................
5.2, 1 ............
5.2, 1 ............
5.2, 1 ............
*
5.2, 1 ............
*
1.1D .............
Label codes
TP33 .........
IP5 ............
IP5 ............
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
53 .............
53 .............
53 .............
*
53 .............
*
...................
Special
provisions
(§ 172.102)
Bulk
(9)
152 ...........
None .........
152 ...........
None .........
152 ...........
None .........
152 ...........
None .........
152 ...........
None .........
152 ...........
None .........
152 ...........
None .........
152 ...........
None .........
152 ...........
None .........
*
152 ...........
*
None .........
Exceptions
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
225 ...........
62 .............
Non-bulk
225 ...........
225 ...........
225 ...........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
*
None .........
*
None .........
10 kg ........
Forbidden
10 L ..........
Forbidden
10 kg ........
Forbidden
10 L ..........
Forbidden
5 kg ..........
Forbidden
5 L ............
Forbidden
5 kg ..........
Forbidden
5 L ............
Forbidden
Forbidden
Forbidden
*
Forbidden
*
Forbidden
Passenger
aircraft/rail
25 kg ........
Forbidden
25 L ..........
Forbidden
25 kg ........
Forbidden
25 L ..........
Forbidden
10 kg ........
Forbidden
10 L ..........
Forbidden
10 kg ........
Forbidden
10 L ..........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Cargo aircraft only
Quantity limitations
(see §§ 173.27 and
175.75)
(8)
Packaging (§ 173.***)
§ 172.101—HAZARDOUS MATERIALS TABLE—Continued
(10)
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
04 .............
Location
12, 40, 52,
53.
12, 40, 52,
53.
2, 40, 52,
53.
12, 40, 52,
53.
2, 40, 52,
53.
12, 40, 52,
53.
2, 40, 52,
53.
12, 40, 52,
53.
2, 40, 52,
53.
12, 40, 52,
53.
2, 40, 52,
53.
12, 40, 52,
53.
2, 40, 52,
53.
12, 40, 52,
53.
2, 40, 52,
53.
12, 40, 52,
53.
2, 40, 52,
53.
12, 40, 52,
53.
2, 40, 52,
53.
25.
Other
Vessel stowage
3824
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
Organic peroxide type F,
solid, temperature controlled.
VerDate Sep<11>2014
19:36 Jan 22, 2015
G ............
Jkt 235001
PO 00000
Frm 00039
UN3120 ....
*
UN0433 ....
*
UN0151 ....
UN0150 ....
UN0159 ....
*
1.1C ..........
*
1.1D ..........
1.1D ..........
*
UN0411 ....
*
5.1 ............
*
1.1D ..........
*
UN3085 ....
5.2 ............
1.3C ..........
*
UN0160 ....
UN0161 ....
UN0509 ....
E:\FR\FM\23JAP3.SGM
*
UN0044 ....
UN0377 ....
UN0378 ....
*
UN0319 ....
UN0320 ....
UN0376 ....
*
UN0345 ....
UN0424 ....
*
1.1C ..........
1.3C ..........
1.4C ..........
Sfmt 4702
*
1.4S ..........
1.1B ..........
1.4B ..........
*
1.3G ..........
1.4G ..........
1.4S ..........
*
1.4S ..........
1.3G ..........
Powder, smokeless ............
Powder, smokeless ............
Powder, smokeless ............
Powder cake, wetted or
Powder paste, wetted
with not less than 17 percent alcohol by mass.
Powder cake, wetted or
Powder paste, wetted
with not less than 25 percent water, by mass.
Fmt 4701
Pentolite, dry or wetted with
less than 15 percent
water, by mass.
Pentaerythrite tetranitrate or
Pentaerythritol tetranitrate
or PETN, with not less
than 7 percent wax by
mass.
Pentaerythrite tetranitrate,
wetted or Pentaerythritol
tetranitrate, wetted, or
PETN, wetted with not
less than 25 percent
water, by mass, or
Pentaerythrite
tetranitrate, or Pentaerythritol tetranitrate or
PETN, desensitized with
not less than 15 percent
phlegmatizer by mass.
Oxidizing solid, corrosive,
n.o.s.
G ............
tkelley on DSK3SPTVN1PROD with PROPOSALS3
Primers, cap type ...............
Primers, cap type ...............
Primers, cap type ...............
Primers, tubular ..................
Primers, tubular ..................
Primers, tubular ..................
Projectiles, inert with tracer
Projectiles, inert, with tracer
5.1, 8 ............
*
5.1, 8 ............
5.2 ................
23JAP3
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
*
1.4S ..............
1.3G .............
*
1.3G .............
1.4G .............
None ............
*
None ............
1.1B ..............
1.4B ..............
*
1.1C .............
1.3C .............
1.4C .............
1.3C .............
*
1.1C .............
*
1.1D .............
1.1D .............
*
1.1D .............
III ..............
...................
5.1, 8 ............
II ...............
I ................
...................
*
...................
...................
*
...................
...................
...................
*
...................
...................
...................
*
...................
...................
...................
...................
*
...................
*
...................
121 ...........
*
120 ...........
62, IB6,
IP2, T3,
TP33.
62, IB8,
IP3, T1,
TP33.
*
62 .............
TP33 .........
*
...................
...................
*
None .........
None .........
None .........
*
None .........
None .........
None .........
*
None .........
None .........
None .........
None .........
*
None .........
*
None .........
None .........
*
None .........
152 ...........
152 ...........
*
None .........
None .........
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
213 ...........
212 ...........
211 ...........
225 ...........
*
62 .............
62 .............
*
None .........
None .........
None .........
*
None .........
None .........
None .........
*
None .........
None .........
None .........
None .........
*
None .........
*
None .........
None .........
*
None .........
240 ...........
242 ...........
*
242 ...........
225 ...........
*
25 kg ........
Forbidden
*
Forbidden
Forbidden
25 kg ........
*
25 kg ........
Forbidden
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
*
Forbidden
*
Forbidden
Forbidden
*
Forbidden
25 kg ........
5 kg ..........
*
1 kg ..........
Forbidden
100 kg ......
Forbidden
Forbidden
75 kg ........
100 kg ......
100 kg ......
Forbidden
75 kg ........
Forbidden
Forbidden
75 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
100 kg ......
25 kg ........
15 kg ........
Forbidden
01 .............
03 .............
03 .............
02 .............
01 .............
01 .............
05 .............
05 .............
04 .............
04 .............
02 .............
04 .............
04 .............
04 .............
04 .............
04 .............
B ...............
B ...............
D ...............
D ...............
25.
25.
25.
25.
25.
25.
25.
25.
25, 26E.
25, 26E.
25.
25.
25.
25.
25.
25.
13, 56, 58,
106, 138.
13, 34, 56,
58, 106,
138.
13, 34, 56,
58, 106,
138.
2, 52, 53.
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
3825
Symbols
Identification
Nos.
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00040
Fmt 4701
Sfmt 4702
liquid .................
liquid .................
solid ..................
solid ..................
solid ..................
E:\FR\FM\23JAP3.SGM
UN0434 ....
UN0344 ....
1.2F ..........
1.4D ..........
*
UN0391 ....
*
UN0173 ....
*
1.1D ..........
....
....
....
....
....
UN0324 ....
1.2D ..........
*
UN0169 ....
1.1D ..........
UN0495
UN0497
UN0498
UN0499
UN0501
UN0168 ....
1.1F ..........
..........
..........
..........
..........
..........
UN0167 ....
1.4G ..........
*
1.3C
1.1C
1.1C
1.3C
1.4C
UN0435 ....
1.2G ..........
UN0427 ....
1.4F ..........
23JAP3
....
....
....
....
....
Rocket
Rocket
Rocket
Rocket
Rocket
*
*
1.3C ..........
1.1C ..........
1.2C ..........
1.2J ...........
1.3J ...........
Rivets, explosive ................
UN0186
UN0280
UN0281
UN0395
UN0396
*
1.4S ..........
Release devices, explosive
motors ....................
motors ....................
motors ....................
motors, liquid fueled
motors, liquid fueled
*
UN0174 ....
*
1.4S ..........
RDX and HMX mixtures,
wetted with not less than
15 percent water by
mass or RDX and HMX
mixtures, desensitized
with not less than 10 percent phlegmatizer by
mass.
Propellant,
Propellant,
Propellant,
Propellant,
Propellant,
1.4D ..........
UN0426 ....
UN0347 ....
1.4G ..........
1.2D ..........
Projectiles, inert, with tracer
Projectiles, with burster or
expelling charge.
Projectiles, with burster or
expelling charge.
Projectiles, with burster or
expelling charge.
Projectiles, with burster or
expelling charge.
Projectiles, with burster or
expelling charge.
Projectiles, with burster or
expelling charge.
Projectiles, with bursting
charge.
Projectiles, with bursting
charge.
Projectiles, with bursting
charge.
Projectiles, with bursting
charge.
Projectiles, with bursting
charge.
1.2F ..........
UN0425 ....
UN0346 ....
Hazard
class or
division
Hazardous materials descriptions and
proper shipping names
tkelley on DSK3SPTVN1PROD with PROPOSALS3
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
PG
.............
.............
.............
.............
.............
*
1.3C
1.1C
1.2C
1.2J
1.3J
.............
.............
.............
..............
..............
*
1.4S ..............
*
1.4S ..............
*
1.1D .............
*
1.3C
1.1C
1.1C
1.3C
1.4C
1.4D .............
1.2F ..............
1.2D .............
1.1D .............
1.1F ..............
1.4G .............
1.2G .............
1.4F ..............
1.2F ..............
1.4D .............
1.4G .............
1.2D .............
Label codes
109
109
109
109
109
*
...........
...........
...........
...........
...........
*
...................
*
...................
*
...................
*
37 .............
37 .............
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
Special
provisions
(§ 172.102)
None
None
None
None
None
*
.........
.........
.........
.........
.........
*
None .........
*
None .........
*
None .........
*
.........
.........
.........
.........
.........
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
Exceptions
None
None
None
None
None
Bulk
(9)
.............
.............
.............
.............
.............
62
62
62
62
62
.............
.............
.............
.............
.............
62 .............
62 .............
62 .............
62
62
62
62
62
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
Non-bulk
.........
.........
.........
.........
.........
*
62 .............
62 .............
62 .............
None .........
None .........
*
62 .............
*
62 .............
*
None .........
*
None
None
None
None
None
62 .............
None .........
62 .............
62 .............
None .........
62 .............
62 .............
None .........
None .........
62 .............
62 .............
62 .............
*
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
*
25 kg ........
*
25 kg ........
*
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Passenger
aircraft/rail
220 kg ......
Forbidden
Forbidden
Forbidden
Forbidden
100 kg ......
100 kg ......
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
Forbidden
Forbidden
Forbidden
75 kg ........
75 kg ........
Forbidden
Cargo aircraft only
Quantity limitations
(see §§ 173.27 and
175.75)
(8)
Packaging (§ 173.***)
§ 172.101—HAZARDOUS MATERIALS TABLE—Continued
(10)
.............
.............
.............
.............
.............
04
04
04
05
05
.............
.............
.............
.............
.............
01 .............
01 .............
04 .............
04
04
04
04
02
02 .............
05 .............
04 .............
04 .............
05 .............
02 .............
03 .............
05 .............
05 .............
02 .............
02 .............
04 .............
Location
25.
25.
25.
25, 23E.
25, 23E.
25.
25.
25.
25.
25.
25, 26E.
25, 26E.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
25.
Other
Vessel stowage
3826
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00041
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
23JAP3
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
Signal devices, hand ..........
Signal devices, hand ..........
Self-reactive liquid type B ..
Self-reactive liquid type B,
temperature controlled.
Self-reactive liquid type C ..
Self-reactive liquid type C,
temperature controlled.
Self-reactive liquid type D ..
Self-reactive liquid type D,
temperature controlled.
Self-reactive liquid type E ..
Self-reactive liquid type E,
temperature controlled.
Self-reactive liquid type F ...
Self-reactive liquid type F,
temperature controlled.
Self-reactive solid type B ...
Self-reactive solid type B,
temperature controlled.
Self-reactive solid type C ...
Self-reactive solid type C,
temperature controlled.
Self-reactive solid type D ...
Self-reactive solid type D,
temperature controlled.
Self-reactive solid type E ...
Self-reactive solid type E,
temperature controlled.
Self-reactive solid type F ....
Self-reactive solid type F,
temperature controlled.
Rocket motors with
hypergolic liquids with or
without an expelling
charge.
Rocket motors with
hypergolic liquids with or
without an expelling
charge.
Rockets, line-throwing ........
Rockets, line-throwing ........
Rockets, line-throwing ........
Rockets, liquid fueled with
bursting charge.
Rockets, liquid fueled with
bursting charge.
Rockets, with bursting
charge.
Rockets, with bursting
charge.
Rockets, with bursting
charge.
Rockets, with bursting
charge.
Rockets, with expelling
charge.
Rockets, with expelling
charge.
Rockets, with expelling
charge.
Rockets, with inert head .....
tkelley on DSK3SPTVN1PROD with PROPOSALS3
UN0250 ....
UN0180 ....
UN0295 ....
UN0436 ....
1.2E ..........
1.2F ..........
1.2C ..........
UN0437 ....
UN0182 ....
1.1E ..........
UN0183 ....
1.4C ..........
UN3230 ....
UN3240 ....
*
UN0191 ....
UN0373 ....
*
1.4G ..........
1.4S ..........
UN3228 ....
UN3238 ....
UN3226 ....
UN3236 ....
UN3224 ....
UN3234 ....
UN3222 ....
UN3232 ....
UN3229 ....
UN3239 ....
UN3227 ....
UN3237 ....
UN3225 ....
UN3235 ....
4.1 ............
4.1 ............
4.1 ............
4.1 ............
4.1 ............
4.1 ............
4.1 ............
4.1 ............
4.1 ............
4.1 ............
4.1 ............
4.1 ............
4.1 ............
4.1 ............
4.1 ............
4.1 ............
UN3223 ....
UN3233 ....
*
4.1 ............
4.1 ............
4.1 ............
4.1 ............
*
UN3221 ....
UN3231 ....
1.3C ..........
UN0438 ....
1.3C ..........
UN0181 ....
1.1F ..........
UN0398 ....
1.2J ...........
....
....
....
....
UN0238
UN0240
UN0453
UN0397
1.2L ..........
1.2G ..........
1.3G ..........
1.4G ..........
1.1J ...........
UN0322 ....
1.3L ..........
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
*
1.4G .............
1.4S ..............
4.1 ................
4.1 ................
4.1 ................
4.1 ................
4.1 ................
4.1 ................
4.1 ................
4.1 ................
4.1 ................
4.1 ................
4.1 ................
4.1 ................
4.1 ................
4.1 ................
4.1 ................
4.1 ................
4.1 ................
4.1 ................
*
4.1 ................
4.1 ................
1.3C .............
1.4C .............
1.3C .............
1.2C .............
1.2F ..............
1.2E ..............
1.1E ..............
1.1F ..............
1.2J ..............
1.2G .............
1.3G .............
1.4G .............
1.1J ..............
1.2L ..............
1.3L ..............
*
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
53 .............
53 .............
...................
...................
...................
...................
...................
...................
...................
...................
*
53 .............
53 .............
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
109 ...........
109 ...........
.........
.........
.........
.........
*
None .........
None .........
151 ...........
None .........
151 ...........
None .........
151 ...........
None .........
None .........
None .........
151 ...........
None .........
151 ...........
None .........
151 ...........
None .........
151 ...........
None .........
151 ...........
None .........
*
151 ...........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None
None
None
None
None .........
None .........
.............
.............
.............
.............
62 .............
62 .............
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
224 ...........
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62
62
62
62
62 .............
62 .............
.........
.........
.........
.........
*
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
*
None .........
None .........
62 .............
62 .............
62 .............
62 .............
None .........
62 .............
62 .............
None .........
None .........
None
None
None
None
None .........
None .........
*
Forbidden
25 kg ........
10 kg ........
Forbidden
10 kg ........
Forbidden
5 kg ..........
Forbidden
5 kg ..........
Forbidden
Forbidden
Forbidden
10 L ..........
Forbidden
10 L ..........
Forbidden
5 L ............
Forbidden
5 L ............
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
100 kg ......
25 kg ........
Forbidden
25 kg ........
Forbidden
10 kg ........
Forbidden
10 kg ........
Forbidden
Forbidden
Forbidden
25 L ..........
Forbidden
25 L ..........
Forbidden
10 L ..........
Forbidden
10 L ..........
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
75 kg ........
Forbidden
Forbidden
Forbidden
.............
.............
.............
.............
02 .............
01 .............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
D ...............
04 .............
02 .............
04 .............
04 .............
05 .............
04 .............
04 .............
05 .............
05 .............
03
03
02
05
05 .............
05 .............
25.
25.
52, 53.
2, 52, 53.
52, 53.
2, 52, 53.
52, 53.
2, 52, 53.
52, 53.
2, 52, 53.
52, 53.
2, 52, 53.
52, 53.
2, 52, 53.
52, 53.
2, 52, 53.
52, 53.
2, 52, 53.
52, 53.
2, 52, 53.
52, 53.
2, 52, 53.
25.
25.
25.
25.
25.
25.
25.
25.
25, 23E.
25.
25.
25.
25, 23E.
25, 14E,
15E.
25, 14E,
15E.
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
3827
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00042
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
23JAP3
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
G ............
Symbols
Identification
Nos.
smoke
smoke
smoke
smoke
...................
...................
...................
...................
*
UN0357 ....
1.1D ..........
1.2D ..........
*
1.1L ..........
devices, explo-
devices, explo-
Substances,
n.o.s.
Substances,
n.o.s.
Substances,
n.o.s.
Substances,
n.o.s.
Substances,
n.o.s.
Substances,
n.o.s.
Substances,
n.o.s.
Substances,
n.o.s.
Substances,
n.o.s.
explosive,
explosive,
explosive,
explosive,
explosive,
explosive,
explosive,
explosive,
explosive,
1.3G ..........
1.3C ..........
1.1G ..........
1.1D ..........
1.1C ..........
1.1A ..........
1.3L ..........
1.2L ..........
UN0375 ....
1.1F ..........
devices, explo-
UN0478 ....
UN0477 ....
UN0476 ....
UN0475 ....
UN0474 ....
UN0473 ....
UN0359 ....
UN0358 ....
UN0374 ....
UN0296 ....
*
UN0204 ....
*
1.2F ..........
devices, explo-
Sodium picramate, dry or
wetted with less than 20
percent water, by mass.
Sounding
sive.
Sounding
sive.
Sounding
sive.
Sounding
sive.
*
UN0234 ....
....
....
....
....
*
UN0235 ....
*
1.3C ..........
*
*
1.3C ..........
Sodium dinitro-o-cresolate,
dry or wetted with less
than 15 percent water, by
mass.
Signals,
Signals,
Signals,
Signals,
UN0196
UN0197
UN0313
UN0487
1.4S ..........
..........
..........
..........
..........
UN0193 ....
*
1.1G ..........
*
1.1G
1.4G
1.2G
1.3G
*
UN0192 ....
1.1G ..........
1.3G ..........
Signals, distress, ship ........
Signals, distress, ship ........
Signals, railway track, explosive.
Signals, railway track, explosive.
UN0194 ....
UN0195 ....
Hazard
class or
division
Hazardous materials descriptions and
proper shipping names
tkelley on DSK3SPTVN1PROD with PROPOSALS3
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
PG
.............
.............
.............
.............
1.3G .............
1.3C .............
1.1G .............
1.1D .............
1.1C .............
1.1A ..............
1.3L ..............
1.2L ..............
*
1.1L ..............
1.2D .............
1.1D .............
1.1F ..............
*
1.2F ..............
*
1.3C .............
*
1.3C .............
*
1.1G
1.4G
1.2G
1.3G
1.4S ..............
*
1.1G .............
1.1G .............
1.3G .............
Label codes
101 ...........
101 ...........
101 ...........
101 ...........
101 ...........
101, 111 ...
101 ...........
101 ...........
*
101 ...........
...................
...................
...................
*
...................
*
...................
*
...................
*
...................
...................
...................
...................
...................
*
...................
...................
...................
Special
provisions
(§ 172.102)
*
.........
.........
.........
.........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
*
None .........
None .........
None .........
None .........
*
None .........
*
None .........
*
None .........
None
None
None
None
None .........
*
None .........
None .........
None .........
Exceptions
.............
.............
.............
.............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62
62
62
62
62 .............
62 .............
62 .............
62 .............
Non-bulk
.........
.........
.........
.........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
None .........
*
None .........
62 .............
62 .............
62 .............
*
62 .............
*
None .........
*
None .........
*
None
None
None
None
None .........
*
None .........
None .........
None .........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
Forbidden
Forbidden
Forbidden
25 kg ........
*
Forbidden
Forbidden
Forbidden
Passenger
aircraft/rail
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
Forbidden
Forbidden
100 kg ......
Forbidden
Forbidden
75 kg ........
Cargo aircraft only
Quantity limitations
(see §§ 173.27 and
175.75)
Packaging (§ 173.***)
Bulk
(9)
(8)
§ 172.101—HAZARDOUS MATERIALS TABLE—Continued
.............
.............
.............
.............
03 .............
04 .............
03 .............
04 .............
04 .............
05 .............
05 .............
05 .............
05 .............
04 .............
04 .............
05 .............
05 .............
04 .............
04 .............
03
02
03
03
01 .............
03 .............
03 .............
03 .............
Location
25.
25.
25.
25.
25.
25, 14E,
15E.
25, 14E,
15E.
25, 14E,
15E.
25.
25.
25.
25.
25.
25, 5E.
25, 5E.
25.
25.
25.
25.
25.
25.
25.
25.
Other
Vessel stowage
(10)
3828
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
VerDate Sep<11>2014
19:36 Jan 22, 2015
D ............
G ............
G ............
G ............
G ............
G ............
Jkt 235001
PO 00000
UN0482 ....
UN0485 ....
UN0481 ....
UN0480 ....
UN0479 ....
*
UN0407 ....
*
1.1D ..........
UN0449 ....
*
1.3J ...........
1.1J ...........
UN0329 ....
*
UN0450 ....
*
1.4C ..........
*
UN0207 ....
1.5D ..........
1.4G ..........
1.4S ..........
1.4D ..........
1.4C ..........
Frm 00043
Fmt 4701
UN0451 ....
*
NA0337 ....
UN0212 ....
UN0306 ....
*
UN0216 ....
*
UN0153 ....
UN0213 ....
*
UN0214 ....
1.1F ..........
1.1D ..........
*
1.4S ..........
1.3G ..........
1.4G ..........
*
1.1D ..........
*
1.1D ..........
1.1D ..........
*
1.1D ..........
Trinitro-m-cresol .................
Trinitroaniline or Picramide
Trinitroanisole .....................
Sfmt 4702
E:\FR\FM\23JAP3.SGM
*
UN0386 ....
UN0215 ....
23JAP3
*
UN0387 ....
*
UN0217 ....
UN0218 ....
*
1.1D ..........
*
1.1D ..........
*
1.1D ..........
1.1D ..........
Trinitrofluorenone ...............
Trinitronaphthalene .............
Trinitrophenetole .................
Trinitrochlorobenzene or
Picryl chloride.
Trinitrobenzenesulfonic acid
Trinitrobenzoic acid, dry or
wetted with less than 30
percent water, by mass.
*
UN0155 ....
*
1.1D ..........
1.1D ..........
Trinitrobenzene, dry or
wetted with less than 30
percent water, by mass.
Toy Caps ............................
Tracers for ammunition ......
Tracers for ammunition ......
UN0330 ....
1.1E ..........
Torpedoes, liquid fueled,
with inert head.
Torpedoes, liquid fueled,
with or without bursting
charge.
Torpedoes with bursting
charge.
Torpedoes with bursting
charge.
Torpedoes with bursting
charge.
Tetrazol-1-acetic acid .........
Tetranitroaniline ..................
Substances, explosive,
n.o.s.
Substances, explosive,
n.o.s.
Substances, explosive,
n.o.s.
Substances, explosive,
n.o.s.
Substances, explosive, very
insensitive, n.o.s or Substances, EVI, n.o.s.
tkelley on DSK3SPTVN1PROD with PROPOSALS3
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
*
1.1D .............
1.1D .............
*
1.1D .............
*
1.1D .............
*
1.1D .............
1.1D .............
*
1.1D .............
*
1.1D .............
1.1D .............
*
1.1D .............
*
1.4S ..............
1.3G .............
1.4G .............
1.1D .............
1.1F ..............
1.1E ..............
1.1J ..............
*
1.3J ..............
*
1.4C .............
*
1.1D .............
1.5D .............
1.4G .............
1.4S ..............
1.4D .............
1.4C .............
*
...................
...................
*
...................
*
...................
*
...................
...................
*
...................
*
...................
...................
*
...................
*
...................
...................
...................
...................
...................
...................
...................
*
...................
*
...................
*
...................
101 ...........
101 ...........
101 ...........
101 ...........
101 ...........
*
None .........
None .........
*
None .........
*
None .........
*
None .........
None .........
*
None .........
*
None .........
None .........
*
None .........
*
None .........
None .........
None .........
...................
...................
...................
...................
*
...................
*
None .........
*
None .........
None .........
None .........
None .........
None .........
None .........
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
*
None .........
None .........
*
None .........
*
None .........
*
None .........
None .........
*
None .........
*
None .........
None .........
*
None .........
*
None .........
None .........
None .........
62 .............
None .........
62 .............
None .........
*
None .........
*
None .........
*
None .........
None .........
None .........
None .........
None .........
None .........
*
Forbidden
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
Forbidden
*
Forbidden
*
Forbidden
Forbidden
*
Forbidden
*
25 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
*
Forbidden
*
Forbidden
*
Forbidden
Forbidden
Forbidden
25 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
100 kg ......
Forbidden
75 kg ........
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
Forbidden
Forbidden
75 kg ........
75 kg ........
75 kg ........
75 kg ........
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
01 .............
03 .............
02 .............
04 .............
05 .............
04 .............
05 .............
05 .............
02 .............
04 .............
03 .............
02 .............
01 .............
02 .............
02 .............
25.
25.
25.
25.
25, 5E.
25.
25.
25.
25.
25, 5E.
25.
25.
25.
25.
25.
25.
25, 23E.
25, 23E.
25.
25.
25.
25.
25.
25.
25.
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
3829
Symbols
Hazard
class or
division
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00044
Fmt 4701
Sfmt 4702
E:\FR\FM\23JAP3.SGM
23JAP3
Tritonal ................................
Trinitrotoluene and
Trinitrobenzene mixtures
or TNT and
trinitrobenzene mixtures
or TNT and
hexanitrostilbene mixtures or Trinitrotoluene
and hexanitrostilnene
mixtures.
Trinitrotoluene mixtures
containing
Trinitrobenzene and
Hexanitrostilbene or TNT
mixtures containing
trinitrobenzene and
hexanitrostilbene.
Trinitrotoluene or TNT, dry
or wetted with less than
30 percent water, by
mass.
Trinitrophenylmethylnitramine or Tetryl.
Trinitroresorcinol or
Styphnic acid, dry or
wetted with less than 20
percent water, or mixture
of alcohol and water, by
mass.
Trinitroresorcinol, wetted or
Styphnic acid, wetted
with not less than 20 percent water, or mixture of
alcohol and water by
mass.
UN3364 ....
UN0154 ....
Trinitrophenol (picric acid),
wetted, with not less than
10 percent water by
mass.
Trinitrophenol or Picric acid,
dry or wetted with less
than 30 percent water, by
mass.
Trinitrophenol, wetted with
not less than 30 percent
water, by mass.
Identification
Nos.
UN0219 ....
*
1.1D ..........
1.1D ..........
UN0389 ....
*
UN0388 ....
UN0209 ....
*
UN0390 ....
1.1D ..........
*
1.1D ..........
UN0394 ....
*
UN0208 ....
4.1 ............
1.1D ..........
UN1344 ....
1.1D ..........
4.1 ............
Hazardous materials descriptions and
proper shipping names
tkelley on DSK3SPTVN1PROD with PROPOSALS3
1.1D ..........
*
1.1D ..........
...................
...................
...................
...................
...................
...................
...................
I ................
...................
I ................
PG
*
1.1D .............
1.1D .............
1.1D .............
*
1.1D .............
1.1D .............
1.1D .............
*
1.1D .............
4.1 ................
1.1D .............
4.1 ................
Label codes
Exceptions
None .........
*
...................
...................
...................
*
...................
...................
...................
*
...................
*
None .........
None .........
None .........
*
None .........
None .........
None .........
*
None .........
162, A8,
None .........
A19, N41.
...................
23, A8,
None .........
A19,
N41, N84.
Special
provisions
(§ 172.102)
Bulk
(9)
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
211 ...........
62 .............
211 ...........
Non-bulk
*
None .........
None .........
None .........
*
None .........
None .........
None .........
*
None .........
None .........
None .........
None .........
*
Forbidden
Forbidden
Forbidden
*
Forbidden
Forbidden
Forbidden
*
Forbidden
1 kg ..........
Forbidden
0.5 kg .......
Passenger
aircraft/rail
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
15 kg ........
Forbidden
0.5 kg .......
Cargo aircraft only
Quantity limitations
(see §§ 173.27 and
175.75)
(8)
Packaging (§ 173.***)
§ 172.101—HAZARDOUS MATERIALS TABLE—Continued
(10)
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
04 .............
E ...............
04 .............
E ...............
Location
25.
25.
25.
25.
25, 5E.
25, 5E.
25.
28, 36.
25, 5E.
36.
Other
Vessel stowage
3830
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
VerDate Sep<11>2014
I .............
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00045
Zirconium picramate, dry or
wetted with less than 20
percent water, by mass.
White asbestos (chrysotile,
actinolite, anthophyllite,
tremolite).
Warheads, rocket with
burster or expelling
charge.
Warheads, rocket with
burster or expelling
charge.
Warheads, rocket with
bursting charge.
Warheads, rocket with
bursting charge.
Warheads, rocket with
bursting charge.
Warheads, torpedo with
bursting charge.
Urea nitrate, dry or wetted
with less than 20 percent
water, by mass.
tkelley on DSK3SPTVN1PROD with PROPOSALS3
*
UN0220 ....
UN0286 ....
1.4F ..........
1.1D ..........
UN0287 ....
UN0371 ....
*
1.4D ..........
Fmt 4701
*
UN2590 ....
*
UN0236 ....
1.1D ..........
*
9 ...............
*
1.3C ..........
*
UN0221 ....
1.1F ..........
*
UN0369 ....
1.2D ..........
*
UN0370 ....
*
1.1D ..........
...................
III ..............
...................
...................
...................
...................
...................
...................
...................
*
*
1.3C .............
*
9 ...................
1.1D .............
1.1F ..............
1.2D .............
1.1D .............
1.4F ..............
*
1.4D .............
*
1.1D .............
*
*
...................
*
156, IB8,
IP2, IP3,
T1, TP33.
...................
...................
...................
...................
...................
*
...................
*
119 ...........
*
*
None .........
*
155 ...........
None .........
None .........
None .........
None .........
None .........
*
None .........
*
None .........
62 .............
216 ...........
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
62 .............
*
*
None .........
*
216 ...........
62 .............
None .........
62 .............
62 .............
None .........
*
62 .............
*
None .........
*
*
Forbidden
*
200 kg ......
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
*
Forbidden
*
Forbidden
Forbidden
200 kg ......
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
75 kg ........
Forbidden
04 .............
A ...............
04 .............
05 .............
04 .............
04 .............
05 .............
02 .............
04 .............
25, 5E.
34, 40.
25.
25.
25.
25.
25.
25.
25.
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
Sfmt 4702
E:\FR\FM\23JAP3.SGM
23JAP3
3831
3832
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
*
*
*
*
*
10. In § 172.102, in paragraph (c)(1)
Special Provision 136 is revised to read
as follows:
■
§ 172.102
Special provisions.
*
*
*
*
(c) * * *
(1) * * *
136 This entry only applies to
machinery and apparatus containing
hazardous materials as an integral
element of the machinery or apparatus.
It may not be used to describe
machinery or apparatus for which a
proper shipping name exists in the
§ 172.101 Table. Except when approved
by the Associate Administrator,
machinery or apparatus may only
contain hazardous materials for which
exceptions are referenced in Column (8)
of the § 172.101 Table and are provided
in part 173, subparts D and G, of this
subchapter. Hazardous materials
shipped under this entry are excepted
from the labeling requirements of this
subchapter unless offered for
transportation or transported by aircraft
and are not subject to the placarding
requirements of part 172, subpart F, of
this subchapter. Orientation markings as
described in § 172.312(a)(2) are required
when liquid hazardous materials may
escape due to incorrect orientation. The
machinery or apparatus, if unpackaged,
or the packaging in which it is
contained shall be marked ‘‘Dangerous
goods in machinery’’ or ‘‘Dangerous
goods in apparatus,’’ as appropriate,
with the identification number UN3363.
For transportation by aircraft,
machinery or apparatus may not contain
any material forbidden for
transportation by passenger or cargo
aircraft. The Associate Administrator
may except from the requirements of
this subchapter equipment, machinery
and apparatus provided:
a. It is shown that it does not pose a
significant risk in transportation;
b. The quantities of hazardous
materials do not exceed those specified
in § 173.4a of this subchapter; and
c. The equipment, machinery or
apparatus conforms with § 173.222 of
this subchapter.
*
*
*
*
*
■ 11. In § 172.201, paragraph (d) is
revised to read as follows:
tkelley on DSK3SPTVN1PROD with PROPOSALS3
*
§ 172.201 Preparation and retention of
shipping papers.
*
*
*
*
*
(d) Emergency response telephone
number. Except as provided in
§ 172.604(d), a shipping paper must
contain an emergency response
telephone number and, if utilizing an
emergency response information
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
telephone number service provider,
identify the person (by name or contract
number) who has a contractual
agreement with the service provider, as
prescribed in subpart G of this part.
*
*
*
*
*
■ 12. In § 172.301, paragraph (f) is
revised to read as follows:
§ 172.301 General marking requirements
for non-bulk packagings.
*
*
*
*
*
(f) NON-ODORIZED marking on
cylinders containing LPG. No person
may offer for transportation or transport
a specification cylinder, except a
Specification 2P or 2Q container or a
Specification 39 cylinder, containing
unodorized liquefied petroleum gas
(LPG) unless it is legibly marked NONODORIZED or NOT ODORIZED in
letters not less than 6.3 mm (0.25
inches) in height near the marked
proper shipping name required by
paragraph (a) of this section. The NONODORIZED or NOT ODORIZED marking
may appear on a cylinder used for both
unodorized and odorized LPG.
■ 13. In 173.326, paragraph (d) is
revised to read as follows:
§ 172.326
Portable tanks.
*
*
*
*
*
(d) NON-ODORIZED marking on
portable containing LPG. No person may
offer for transportation or transport a
portable tank containing unodorized
liquefied petroleum gas (LPG) as
authorized in § 173.315(b)(1) unless it is
legibly marked NON-ODORIZED or
NOT ODORIZED on two opposing sides
near the marked proper shipping name
required by paragraph (a) of this section,
or near the placards. The NONODORIZED or NOT ODORIZED marking
may appear on a portable tank used for
both unodorized and odorized LPG.
■ 14. In 173.328, paragraph (e) is revised
to read as follows:
§ 172.328
Cargo tanks.
*
*
*
*
*
(e) NON-ODORIZED marking on
cargo tanks containing LPG. No person
may offer for transportation or transport
a cargo tank containing unodorized
liquefied petroleum gas (LPG) as
authorized in § 173.315(b)(1) unless it is
legibly marked NON-ODORIZED or
NOT ODORIZED on two opposing sides
near the marked proper shipping name
as specified in paragraph (b)(1) of this
section, or near the placards. The NONODORIZED or NOT ODORIZED marking
may appear on a cargo tank used for
both unodorized and odorized LPG.
■ 15. In 173.330, paragraph (c) is revised
to read as follows:
PO 00000
Frm 00046
Fmt 4701
Sfmt 4702
§ 172.330
tanks.
Tank cars and multi-unit tank car
*
*
*
*
*
(c) No person may offer for
transportation or transport a tank car or
multi-unit tank car tank containing
unodorized liquefied petroleum gas
(LPG) unless it is legibly marked NONODORIZED or NOT ODORIZED on two
opposing sides near the marked proper
shipping name required by paragraphs
(a)(1) and (a)(2) of this section, or near
the placards. The NON-ODORIZED or
NOT ODORIZED marking may appear
on a tank car or multi-unit tank car tank
used for both unodorized and odorized
LPG.
■ 16. In § 172.406, paragraph (d) is
revised to read as follows:
§ 172.406
Placement of labels.
*
*
*
*
*
(d) Contrast with background. Each
label must be printed on or affixed to a
background color contrasting to the
color specification of the label as
required by § 172.407(d)(1) of this part,
or must have a dotted or solid line outer
border, to enhance the visibility of the
label. However, labels created with a
dotted or solid line outer border need
not be limited to only backgrounds of
non-contrasting color.
*
*
*
*
*
■ 17. In § 172.407, paragraph (d)(4)(ii) is
revised to read as follows:
§ 172.407
Label specifications.
*
*
*
*
*
(d) * * *
(4) * * *
(ii) Color charts conforming to
appendix A to this part are on display
at the Standards and Rulemaking
Division, Pipeline and Hazardous
Materials Safety Administration, U.S.
Department of Transportation, East
Building, 1200 New Jersey Avenue SE.,
Washington, DC 20590–0001.
*
*
*
*
*
■ 18. In § 172.514, paragraph (c)(4) is
revised to read as follows:
§ 172.514
Bulk Packagings.
*
*
*
*
*
(c) * * *
(4) For an IBC labeled in accordance
with subpart E of this part, instead of
being placarded, the IBC may display
the proper shipping name and UN
identification number markings in
accordance with the size requirements
of § 172.301(a)(1) in place of the UN
number on an orange panel, placard or
white square-on-point configuration as
prescribed in § 172.336(b); and
*
*
*
*
*
■ 19. In 172.604, paragraph (a) is revised
to read as follows:
E:\FR\FM\23JAP3.SGM
23JAP3
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
§ 172.604
number.
Emergency response telephone
(a) A person who offers a hazardous
material for transportation must provide
a numeric emergency response
telephone number, including the area
code, for use in an emergency involving
the hazardous material. For telephone
numbers outside the United States, the
international access code or the ‘‘+’’
(plus) sign, country code, and city code,
as appropriate, that are needed to
complete the call must be included. The
telephone number must be—
*
*
*
*
*
PART 173—SHIPPERS—GENERAL
REQUIREMENTS FOR SHIPMENTS
AND PACKAGINGS
20. The authority citation for part 173
continues to read as follows:
■
Authority: 49 U.S.C. 5101–5128, 44701; 49
CFR 1.81 and 1.97.
21. In § 173.4a, paragraph (a)
introductory text is revised to read as
follows:
■
§ 173.4a
Excepted quantities.
(a) Excepted quantities of materials,
other than articles, are not subject to
requirements of this subchapter except
for:
*
*
*
*
*
■ 22. In § 173.21, paragraph (e) is
revised to read as follows:
§ 173.21 Forbidden materials and
packages.
*
*
*
*
*
(e) A material in the same packaging,
freight container, overpack, or transport
vehicle with another material, the
mixing of which is likely to cause a
dangerous evolution of heat, produce
flammable or poisonous gases or vapors,
or produce corrosive materials.
*
*
*
*
*
■ 23. In § 173.24a, paragraph (c)(1)(iv) is
revised to read as follows:
§ 173.24a Additional general requirements
for non-bulk packagings and packages.
tkelley on DSK3SPTVN1PROD with PROPOSALS3
*
*
*
*
*
(c) * * *
(1) * * *
(iv) For transportation by aircraft, the
total net quantity does not exceed the
lowest permitted maximum net quantity
per package as shown in Column (9a) or
(9b), as appropriate, of the § 172.101
Table. The permitted maximum net
quantity must be calculated in
kilograms if a package contains both a
liquid and a solid. These requirements
do not apply to limited quantity
hazardous materials packaged in
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
accordance with § 173.27(f)(2) of this
part.
*
*
*
*
*
■ 24. In § 173.27, paragraph (f)(2)(i) is
revised to read as follows:
§ 173.27 General requirements for
transportation by aircraft.
*
*
*
*
*
(f) * * *
(2) * * *
(i) Unless otherwise specified in this
part, or in subpart C of part 171 of this
subchapter, when a limited quantity of
hazardous material packaged in a
combination packaging is intended for
transportation aboard an aircraft, the
inner and outer packagings must
conform to the quantity limitations set
forth in Table 3 of this paragraph.
Materials and articles must be
authorized for transportation aboard a
passenger-carrying aircraft (see Column
(9A) of the § 172.101 Hazardous
Materials Table of this subchapter). Not
all unauthorized materials or articles
may be indicated in this table. For
mixed content packages of limited
quantity material, the total net quantity
must not exceed the lowest permitted
maximum net quantity (for each of the
hazard classes or divisions represented
in the package) per outer package set
forth in Table 3 of this paragraph. The
permitted maximum net quantity must
be calculated in kilograms for a package
that contains both a solid and a liquid.
Unless otherwise excepted, packages
must be marked and labeled in
accordance with this section and any
additional requirements in subparts D
and E, respectively, of part 172 of this
subchapter. Materials or articles not
authorized as limited quantity by
aircraft are:
*
*
*
*
*
■ 25. In § 173.150, paragraphs (f)(3)(ix)
and (x) are revised and paragraph
(f)(3)(xi) is added as follows:
3833
(e) Nitric acid of less than 90 percent
concentration, when offered for
transportation or transported by rail,
highway, or water may be packaged in
4A, 4B, or 4N metal boxes, 4G
fiberboard boxes or 4C1, 4C2, 4D or 4F
wooden boxes with inside glass
packagings of not over 2.5 L (0.66
gallon) capacity each. When placed in
wooden or fiberboard outer packagings,
the glass inner packagings must be
packed in tightly-closed, non-reactive
intermediate packagings, cushioned
with a non-reactive absorbent material.
*
*
*
*
*
■ 27. In § 173.159, paragraph (j) is
added as follows:
§ 173.159
Batteries, wet.
*
*
*
*
*
(j) Damaged electric storage batteries
incapable of retaining battery fluid
inside the outer casing during
transportation may be transported by
highway or rail provided the batteries
are transported in non-bulk packaging,
meet the requirements of paragraph (a)
of this section, and are prepared for
transport under one or more of the
following conditions:
(1) Drain the battery of fluid to
eliminate the potential for leakage
during transportation;
(2) Individually pack the battery in a
leakproof intermediate package with
sufficient non-reactive absorbent
material capable of absorbing the release
of any electrolyte;
(3) Place the intermediate packaging
in a leakproof outer packaging that
conforms to the general packaging
requirements of subpart B of this part;
or,
(4) Pack the battery in a salvage
packaging in accordance with the
provisions of § 173.3(c) of this part.
■ 28. In § 173.166, paragraph (e)(6)
introductory text is revised to read as
follows:
§ 173.150 Exceptions for Class 3
(flammable and combustible liquids).
*
§ 173.166 Air bag inflators, air bag
modules and seat-belt pretensioners.
*
*
*
*
*
(f) * * *
(3) * * *
(ix) The training requirements of
subpart H of part 172 of this subchapter;
(x) Emergency response information
requirements of subpart G of part 172;
and
(xi) For bulk packagings only,
registration requirements of subpart G of
part 107 of this subchapter.
*
*
*
*
*
■ 26. In 173.158, paragraph (e) is revised
to read as follows:
§ 173.158
Nitric acid.
*
*
PO 00000
*
Frm 00047
*
Fmt 4701
*
Sfmt 4702
*
*
*
*
(e) * * *
(6) Devices from or for a motor
vehicle. When removed from or having
been intended to be used in a motor
vehicle, a serviceable air bag inflator, air
bag module, or seat-belt pretensioner of
Class 9 (UN3268) that was
manufactured as required for use in the
United States and is to be offered for
domestic transportation by highway or
cargo vessel to a recycling or waste
disposal facility may be offered for
transportation and transported in the
following authorized packaging:
*
*
*
*
*
E:\FR\FM\23JAP3.SGM
23JAP3
3834
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
§ 173.199 Category B infectious
substances.
29. In § 173.170, paragraph (b) is
revised to read as follows:
■
§ 173.170
Black powder for small arms.
*
*
*
*
*
(b) The total quantity of black powder
in one transport vehicle or freight
container may not exceed 45.4 kg (100
pounds) net mass. No more than four
freight containers may be on board one
cargo vessel;
*
*
*
*
*
■ 30. In § 173.171, paragraph (b)(1) is
revised to read as follows:
§ 173.171
arms.
Smokeless powder for small
*
*
*
*
*
(b) * * *
(1) One transport vehicle or cargoonly aircraft; or
*
*
*
*
*
■ 31. In § 173.199, paragraph (a)(4) is
revised to read as follows:
(a) * * *
(4) The completed package must be
designed, constructed, maintained,
filled, its contents limited, and closed so
that under conditions normally
encountered in transportation,
including removal from a pallet or
overpack for subsequent handling, there
will be no release of hazardous material
into the environment. Package
effectiveness must not be substantially
reduced for minimum and maximum
temperatures, changes in humidity and
pressure, and shocks, loadings and
vibrations normally encountered during
transportation. The packaging must be
capable of successfully passing the drop
test in § 178.609(d) of this subchapter at
a drop height of at least 1.2 meters (3.9
feet). Following the drop test, there
must be no leakage from the primary
receptacle, which must remain
protected by absorbent material, when
required, in the secondary packaging. At
least one surface of the outer packaging
must have a minimum dimension of 100
mm by 100 mm (3.9 inches).
*
*
*
*
*
■ 32. In § 173.216, paragraph (c)(1) is
revised to read as follows:
§ 173.216
Asbestos, blue, brown or white.
*
*
*
*
*
(c) * * *
(1) Rigid, leaktight packagings,, such
as metal, plastic or fiber drums, portable
tanks, hopper-type rail cars, hoppertype motor vehicles or additional bulk
packagings authorized in § 173.240;
*
*
*
*
*
■ 33. In § 173.225, the table in
paragraph (d)(4) is revised to read as
follows:
§ 173.225 Packaging requirements and
other provisions for organic peroxides.
*
*
*
*
*
(d) * * *
(4) The maximum quantity per
packaging or package for Packing
Methods OP1–OP8 must be as follows:
MAXIMUM QUANTITY PER PACKAGING/PACKAGE
[For packing methods OP1 to OP8]
Packing method
Maximum quantity
OP2 1
OP1
Solids and combination packagings (liquid and
solid) (kg) ......................................................
Liquids (L) ........................................................
0.5
0.5
OP4 1
OP3
0.5/10
................
5
5
OP5
5/25
................
OP6
25
30
OP7
50
60
OP8
50
60
2 400
3 225
1 If two values are given, the first applies to the maximum net mass per inner packaging and the second to the maximum net mass of the complete package.
2 60 kg for jerricans/200 kg for boxes and, for solids, 400 kg in combination packagings with outer packagings comprising boxes (4C1, 4C2,
4D, 4F, 4G, 4H1, and 4H2) and with inner packagings of plastics or fiber with a maximum net mass of 25 kg.
3 60 L for jerricans.
*
*
*
*
*
34. In § 173.301, paragraph (g)(1)(iii)
is revised to read as follows:
■
§ 173.301 General requirements for
shipment of compressed gases and other
hazardous materials in cylinders, UN
pressure receptacles and spherical
pressure vessels.
tkelley on DSK3SPTVN1PROD with PROPOSALS3
*
*
*
*
*
(g) * * *
(1) * * *
(iii) Acetylene as authorized by
§ 173.303. Mobile acetylene trailers
must be maintained, operated and
transported in accordance with CGA
Pamphlet G–1.6 (IBR, see § 171.7 of this
subchapter).
*
*
*
*
*
■ 35. In § 173.304a, paragraph (d)(5) is
added as follows:
§ 173.304a Additional requirements for
shipment of liquefied compressed gases in
specification cylinders.
*
*
*
VerDate Sep<11>2014
*
*
19:36 Jan 22, 2015
Jkt 235001
(d) * * *
(5) Odorization. (i) All liquefied
petroleum gas must be odorized as
required in this paragraph to indicate
positively, by a distinctive odor, the
presence of gas down to a concentration
in air of not over one-fifth the lower
limit of combustibility; however,
odorization is not required if it is
harmful in the use or further processing
of the liquefied petroleum gas or if it
will serve no useful purpose as a
warning agent in such use or further
processing.
(A) The lower limits of combustibility
of the more commonly used liquefied
petroleum gases are: Propane, 2.15
percent; butane, 1.55 percent. These
figures represent volumetric percentages
of gas-air mixtures in each case.
(B) The use of 1.0 pound of ethyl
mercaptan, 1.0 pound of thiophane, or
1.4 pounds of amyl mercaptan per
10,000 gallons of liquefied petroleum
gas is considered sufficient to meet the
PO 00000
Frm 00048
Fmt 4701
Sfmt 4702
requirements of this paragraph. Use of
another odorant is not prohibited so
long as there is enough to meet the
requirements of this paragraph.
(ii) Except as provided in paragraph
(d)(5)(i), the offeror must ensure that
enough odorant will remain in the
cylinder during the course of
transportation. The shipper must have
procedures in place to:
(A) Ensure quantitative testing
methods are used to measure the
amount of odorant in the liquefied
petroleum gas;
(B) Ensure that, when the odorization
of liquefied petroleum gas is manually
injected, the required amount of odorant
is added;
(C) Ensure that, when odorization of
liquefied petroleum gas is automatically
injected, equipment calibration checks
are conducted to ensure the required
amount of odorant is consistently
added;
E:\FR\FM\23JAP3.SGM
23JAP3
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
(D) Ensure quality control measures
are in place to make sure that persons
who receive cylinders that have been
subjected to any condition that could
lead to corrosion of the cylinder or
receive new or recently cleaned
cylinders are notified of this
information and that a person filling
these packagings implement quality
control measures to ensure that
potential odorant fade is addressed;
(E) Inspect a cylinder for signs of
oxidation or corrosion;
(F) Take corrective action needed to
ensure enough odorant remains in the
cylinder during the course of
transportation, such as increasing the
amount of odorant added to the
liquefied petroleum gas; and
(G) Address odorant fade.
*
*
*
*
*
■ 36. In § 173.306, paragraph (k) is
revised to read as follows
§ 173.306 Limited quantities of
compressed gases.
tkelley on DSK3SPTVN1PROD with PROPOSALS3
*
*
*
*
*
(k) Aerosols for recycling or disposal.
Aerosols, as defined in § 171.8 of this
subchapter, containing a limited
quantity which conforms to the
provisions of paragraph (a)(3), (a)(5),
(b)(1), (b)(2), or (b)(3) of this section are
excepted from the labeling requirements
of subpart E of part 172 this subchapter,
the specification packaging
requirements of this subchapter when
packaged according to this paragraph,
the shipping paper requirements of
subpart C of part 172 of this subchapter
(unless the material meets the definition
of a hazardous substance or hazardous
waste), and the 30 kg (66 pounds) gross
weight limitation, when transported by
motor vehicle for purposes of recycling
or disposal under the following
conditions:
(1) The strong outer packaging and its
contents must not exceed a gross weight
of 500 kg (1,100 pounds);
(2) Each aerosol container must be
secured with a cap to protect the valve
stem or the valve stem must be
removed;
(3) Each completed packages must be
marked in accordance with § 172.315(a);
(4) If the package contains aerosols
conforming to the provisions of
paragraph (a)(3), (a)(5), or (b)(1), it must
also be marked ‘‘INSIDE CONTAINERS
COMPLY WITH PRESCRIBED
REGULATIONS’’; and
(5) The packaging must be offered for
transportation or transported by—
(i) Private or contract motor carrier; or
(ii) Common carrier in a motor vehicle
under exclusive use for such service.
*
*
*
*
*
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
37. In § 173.314, revise paragraph (h)
as follows:
■
§ 173.314 Compressed gases in tank cars
and multi-unit tank cars.
*
*
*
*
*
(h) Special requirements for liquefied
petroleum gas (odorization). (1) All
liquefied petroleum gas must be
odorized as required in this paragraph
to indicate positively, by a distinctive
odor, the presence of gas down to a
concentration in air of not over one-fifth
the lower limit of combustibility;
however, odorization is not required if
it is harmful in the use or further
processing of the liquefied petroleum
gas or if it will serve no useful purpose
as a warning agent in such use or further
processing.
(i) The lower limits of combustibility
of the more commonly used liquefied
petroleum gases are: propane, 2.15
percent; butane, 1.55 percent. These
figures represent volumetric percentages
of gas-air mixtures in each case.
(ii) The use of 1.0 pound of ethyl
mercaptan, 1.0 pound of thiophane, or
1.4 pounds of amyl mercaptan per
10,000 gallons of liquefied petroleum
gas is considered sufficient to meet the
requirements of this paragraph. Use of
another odorant is not prohibited so
long as there is enough to meet the
requirements of this paragraph.
(2) Except as provided in paragraph
(h)(1)(i), the shipper must ensure that
enough odorant will remain in the tank
car during the course of transportation.
The shipper must have procedures in
place to:
(i) Ensure quantitative testing
methods are used to measure the
amount of odorant in the liquefied
petroleum gas;
(ii) Ensure that, when the odorization
of liquefied petroleum gas is manually
injected, the require amount of odorant
is added;
(iii) Ensure that, when odorization of
liquefied petroleum gas is automatically
injected, equipment calibration checks
are conducted to ensure the required
amount of odorant is consistently
added;
(iv) Ensure quality control measures
are in place to mark sure that persons
who receive tank cars that have been
subjected to any condition that could
lead to corrosion of the tank car or
receive new or recently cleaned tank
cars are notified of this information and
that a person filling these packagings
implement quality control measures to
so that potential odorant fade is
addressed;
(v) Inspect a tank car for signs of
oxidation or corrosion;
PO 00000
Frm 00049
Fmt 4701
Sfmt 4702
3835
(vi) Take corrective action needed to
ensure enough odorization remains in
the tank car during the course of
transportation, such as increasing the
amount of odorant added to the
liquefied petroleum gas; and
(vii) Address odorant fade.
*
*
*
*
*
■ 38. In § 173.315, paragraph (b) is
revised to read as follows:
§ 173.315 Compressed gases in cargo
tanks and portable tanks.
*
*
*
*
*
(b) * * *
(1) Odorization. All liquefied
petroleum gas must be odorized as
required in this paragraph to indicate
positively, by a distinctive odor, the
presence of gas down to a concentration
in air of not over one-fifth the lower
limit of combustibility; however,
odorization is not required if it is
harmful in the use or further processing
of the liquefied petroleum gas or if it
will serve no useful purpose as a
warning agent in such use or further
processing.
(i) The lower limits of combustibility
of the more commonly used liquefied
petroleum gases are: propane, 2.15
percent; butane, 1.55 percent. These
figures represent volumetric percentages
of gas-air mixtures in each case.
(ii) The use of 1.0 pound of ethyl
mercaptan, 1.0 pound of thiophane, or
1.4 pounds of amyl mercaptan per
10,000 gallons of liquefied petroleum
gas is considered sufficient to meet the
requirements of this paragraph. Use of
any other odorant is not prohibited so
long as there is enough to meet the
requirements of this paragraph.
(2) Except as provided in paragraph
(b)(1)(i), the shipper must ensure that
enough odorant will remain in the cargo
tank or portable tank during the course
of transportation. The shipper must
have procedures in place to:
(i) Ensure quantitative testing
methods are used to measure the
amount of odorant in the liquefied
petroleum gas;
(ii) Ensure that, when the odorization
of liquefied petroleum gas is manually
injected, the required amount of odorant
is being added;
(iii) Ensure that, when odorization of
liquefied petroleum gas is automatically
injected, equipment calibration checks
are conducted to ensure the required
amount of odorant is consistently
added;
(iv) Ensure that quality control
measures are in place to make sure that
persons who receive cargo tanks or
portable tanks that have been subjected
to any condition that could lead to
corrosion of the packaging or receive
E:\FR\FM\23JAP3.SGM
23JAP3
3836
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
new or recently cleaned cargo tanks or
portable tanks are notified of this
information and that a person filling
these packagings implement quality
control measures to ensure that
potential odorant fade is addressed;
(v) Inspect a cargo tank or portable
tank for signs of oxidation or corrosion;
(vi) Take corrective action needed to
ensure enough odorant remains in the
cargo tank or portable tank during the
course of transportation, such as
increasing the amount of odorant added
to the liquefied petroleum gas; and
(vii) Address odorant fade.
*
*
*
*
*
PART 175—CARRIAGE BY AIR
39. The authority citation for part 175
is revised to read as follows:
■
Authority: 49 U.S.C. 5101–5128; 49 CFR
1.81 and 1.97.
40. In § 175.1, paragraph (d) is added
to read as follows:
■
§ 175.1
Purpose, scope and applicability.
*
*
*
*
*
(d) The requirements of this
subchapter does not apply to
transportation of hazardous material in
support of dedicated air ambulance,
firefighting, or search and rescue
operations performed in compliance
with the operator requirements under
federal air regulations, the 14 CFR.
*
*
*
*
*
■ 41. In § 175.8, paragraph (b)(1) is
revised to read as follows:
§ 175.8 Exceptions for operator equipment
and items of replacement.
tkelley on DSK3SPTVN1PROD with PROPOSALS3
*
*
*
*
*
(b) * * *
(1) Oxygen, or any hazardous material
used for the generation of oxygen, for
medical use by a passenger, which is
furnished by the aircraft operator in
accordance with 14 CFR 121.574,
125.219, or 135.91. For the purposes of
this paragraph, an aircraft operator that
does not hold a certificate under 14 CFR
parts 121, 125, or 135 may apply this
exception in conformance with 14 CFR
121.574, 125.219, or 135.91 in the same
manner as required for a certificate
holder. See § 175.501 of this part for
additional requirements applicable to
the stowage of oxygen.
*
*
*
*
*
§ 175.9
[Amended]
42. In § 175.9, remove and reserve
paragraph (b)(4).
■ 43. In § 175.10, paragraphs (a)(6),
(a)(22) and (a)(24) are revised to read as
follows:
■
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
§ 175.10 Exceptions for passengers,
crewmembers, and air operators.
(a) * * *
(6) Hair curlers (curling irons)
containing a hydrocarbon gas such as
butane, no more than one per person, in
carry-on baggage only. The safety cover
must be securely fitted over the heating
element. Gas refills for such curlers are
not permitted in carry-on or checked
baggage.
*
*
*
*
*
(22) Non-infectious specimens in
preservative solutions transported in
accordance with § 173.4b(b).
*
*
*
*
*
(24) Small cartridges fitted into or
securely packed with devices with no
more than four small cylinders of
carbon dioxide or other suitable gas in
Division 2.2. The water capacity of each
cartridge must not exceed 50 mL
(equivalent to a 28 g carbon dioxide
cartridge), with the approval of the
operator.
*
*
*
*
*
■ 44. In § 175.75, in paragraph (e)(2) is
revised to read as follows:
§ 175.75 Quantity limitations and cargo
location.
*
*
*
*
*
(e) * * *
(2) Packages of hazardous materials
transported aboard a cargo aircraft,
when other means of transportation are
impracticable or not available, in
accordance with procedures approved
in writing by the FAA Regional Office
in the region where the operator is
certificated.
*
*
*
*
*
48. In § 177.840, paragraph (a)(3) is
added to read as follows:
■
§ 177.840
Class 2 (gases) materials.
*
*
*
*
*
(a) * * *
(3) Cylinders for acetylene. Cylinders
containing acetylene and manifolded as
part of a mobile acetylene trailer system
must be transported in accordance with
§ 173.301(g).
*
*
*
*
*
■ 49. In § 177.848, revise paragraph
(e)(5) to read as follows:
§ 177.848 Segregation of hazardous
materials.
*
*
*
*
*
(e) * * *
(5) The note ‘‘A’’ in the second
column of the table means that,
notwithstanding the requirements of the
letter ‘‘X’’, ammonium nitrate (UN1942)
and ammonium nitrate fertilizer may be
loaded or stored with Division 1.1
(explosive) or Division 1.5 materials,
unless otherwise prohibited by
§ 177.835(c).
*
*
*
*
*
PART 178—SPECIFICATIONS FOR
PACKAGINGS
50. The authority citation for part 178
is revised to read as follows:
■
Authority: 49 U.S.C. 5101–5128; 49 CFR
1.81 and 1.97.
51. In § 178.65, paragraph (i)(1) is
revised to read as follows:
■
§ 178.65 Specification 39 non-reusable
(non-refillable) cylinders.
46. In § 176.30, paragraph (a)(4) is
revised to read as follows:
*
*
*
*
(i) * * *
(1) The markings required by this
section must be durable and waterproof.
The requirements of § 178.35(g) do not
apply to this section.
*
*
*
*
*
■ 52. In § 178.337–17, paragraph (a) is
revised to read as follows:
§ 176.30
§ 178.337–17
PART 176—CARRIAGE BY VESSEL
45. The authority citation for part 176
is revised to read as follows:
■
Authority: 49 U.S.C. 5101–5128; 49 CFR
1.81 and 1.97.
■
Dangerous cargo manifest.
(a) * * *
(4) The number and description of
packages (barrels, drums, cylinders,
boxes, etc.) and gross weight for each
type of package;
*
*
*
*
*
PART 177—CARRIAGE BY PUBLIC
HIGHWAY
47. The authority citation for part 177
is revised to read as follows:
■
Authority: 49 U.S.C. 5101–5128; 49 CFR
1.81 and 1.97.
*
PO 00000
*
*
Frm 00050
*
Fmt 4701
*
Sfmt 4702
*
Marking.
(a) General. Each cargo tank certified
after October 1, 2004 must have a
corrosion-resistant metal name plate
(ASME Plate); and each cargo tank
motor vehicle certified after October 1,
2004 must have a specification plate,
permanently attached to the cargo tank
by brazing, welding, or other suitable
means on the left side near the front, in
a place accessible for inspection. If the
specification plate is attached directly to
the cargo tank wall by welding, it must
be welded to the tank before the cargo
tank is postweld heat treated.
*
*
*
*
*
E:\FR\FM\23JAP3.SGM
23JAP3
3837
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
53. In § 178.345–3, revise paragraph
(c)(1) introductory text to read as
follows:
56. In § 179.13, paragraph (b) is
revised to read as follows:
■
§ 178.345–3
■
§ 179.13 Tank car capacity and gross
weight limitation.
Structural integrity.
*
*
*
*
*
(c) * * *
(1) Normal operating loadings. The
following procedure addresses stress in
the cargo tank shell resulting from
normal operating loadings. The effective
stress (the maximum principal stress at
any point) must be determined by the
following formula:
S = 0.5(Sy + Sx) ± [0.25(Sy¥Sx)2 + SS2]0.5
Where:
*
*
*
*
*
54. In § 178.955, paragraph (h) is
redesignated as paragraph (i), paragraph
(i) is redesignated as paragraph (j) and
a new paragraph (h) is added to read as
follows:
■
§ 178.955
General requirements.
*
*
*
*
*
(h) Approval of equivalent
packagings. A Large Packaging differing
from standards in subpart P of this part,
or tested using methods other than those
specified in this subpart, may be used
if approved by the Associate
Administrator. The Large Packagings
and testing methods must be shown to
have an equivalent level of safety.
*
*
*
*
*
PART 179—SPECIFICATIONS FOR
TANK CARS
55. The authority citation for part 179
is revised to read as follows:
■
Authority: 49 U.S.C. 5101–5128; 49 CFR
1.81 and 1.97.
PART 180—CONTINUING
QUALIFICATION AND MAINTENANCE
OF PACKAGINGS
*
*
*
*
(b) Tank cars containing poisonousby-inhalation material meeting the
applicable authorized tank car
specifications listed in § 173.244(a)(2) or
(3) or § 173.314(c) or (d) may have a
gross weight on rail of up to 286,000
pounds (129,727 kg). Tank cars
containing poisonous-by-inhalation
material not meeting the specifications
listed in § 173.244(a)(2) or (3) or
§ 173.314(c) or (d) may be loaded to a
gross weight on rail of up to 286,000
pounds (129,727 kg) only upon approval
of the Associate Administrator for
Safety, Federal Railroad Administration
(FRA). Any increase in weight above
263,000 pounds may not be used to
increase the quantity of the contents of
the tank car.
■ 57. In § 179.24, paragraph (a)(2)
introductory text is revised to read as
follows:
§ 179.24
58. The authority citation for part 180
is revised to read as follows:
■
*
Stamping.
*
*
*
*
*
(a) * * *
(2) Each plate must be stamped,
embossed, or otherwise marked by an
equally durable method in letters 3⁄16
inch high with the following
information (parenthetical abbreviations
may be used, and the AAR form
reference is to the applicable provisions
of the AAR Specifications for Tank Cars
(IBR, see § 171.7 of this subchapter)):
*
*
*
*
*
Authority: 49 U.S.C. 5101–5128; 49 CFR
1.81 and 1.97.
59. In § 180.209, paragraph (j) is
revised to read as follows:
■
§ 180.209 Requirements for requalification
of specification cylinders.
*
*
*
*
*
(j) Cylinder used as a fire
extinguisher. Only a DOT specification
cylinder used as a fire extinguisher and
meeting the requirements of § 173.309(a)
of this subchapter may be requalified in
accordance with this paragraph (j).
*
*
*
*
*
■ 60. Section 180.401 is revised to read
as follows:
§ 180.401
Applicability.
This subpart prescribes requirements,
in addition to those contained in parts
107, 171, 172, 173 and 178 of this
subchapter, applicable to any person,
hazmat employer or hazmat employee
responsible for the continuing
qualification, maintenance or periodic
testing of a cargo tank.
*
*
*
*
*
■ 61. In § 180.407, the table and notes in
paragraph (c) and paragraphs (d)(3) and
(g)(1)(ii) are revised; and paragraph (j) is
added to read as follows:
§ 180.407 Requirements for test and
inspection of specification cargo tanks.
*
*
*
(c) * * *
*
*
COMPLIANCE DATES—INSPECTIONS AND TEST UNDER § 180.407(C)
Date by which first
test must be completed (see Note 1)
Test or inspection (cargo tank specification, configuration, and service)
Interval period after
first test
External Visual Inspection:
tkelley on DSK3SPTVN1PROD with PROPOSALS3
*
*
*
*
*
Internal Visual Inspection:
All insulated cargo tanks, except MC 330, MC 331, MC 338 (see Note 4) ....................................
All cargo tanks transporting lading corrosive to the tank ................................................................
MC 331 cargo tanks less than 3,500 gallons water capacity in dedicated propane service constructed of nonquenched and tempered NQT SA–612 steel (see Note 5).
All other cargo tanks, except MC 338 .............................................................................................
Lining Inspection:
*
Leakage Test:
*
*
*
19:36 Jan 22, 2015
Jkt 235001
PO 00000
Frm 00051
Fmt 4701
Sfmt 4702
*
September 1, 1991
September 1, 1991
TBD ........................
1 year.
1 year.
10 years.
September 1, 1995
5 years.
*
*
*
*
*
*
Pressure Test:
(Hydrostatic or pneumatic) (See Notes 2 and 3).
All cargo tanks which are insulated with no manhole or insulated and lined, except MC 338 ......
All cargo tanks designed to be loaded by vacuum with full opening rear heads ...........................
MC 330 and MC 331 cargo tanks in chlorine service .....................................................................
VerDate Sep<11>2014
*
*
*
*
*
September 1, 1991
September 1, 1992
September 1, 1992
E:\FR\FM\23JAP3.SGM
23JAP3
1 year.
2 years.
2 years.
3838
Federal Register / Vol. 80, No. 15 / Friday, January 23, 2015 / Proposed Rules
COMPLIANCE DATES—INSPECTIONS AND TEST UNDER § 180.407(C)—Continued
Date by which first
test must be completed (see Note 1)
Test or inspection (cargo tank specification, configuration, and service)
MC 331 cargo tanks less than 3,500 gallons water capacity in dedicated propane service constructed of nonquenched and tempered NQT SA–612 steel (See Note 5).
All other cargo tanks ........................................................................................................................
Thickness Test:
*
*
*
*
Interval period after
first test
TBD ........................
10 years.
September 1, 1995
5 years.
*
*
*
Note 1: If a cargo tank is subject to an applicable inspection or test requirement under the regulations in effect on December 30, 1990, and
the due date (as specified by a requirement in effect on December 30, 1990) for completing the required inspection or test occurs before the
compliance date listed in table I, the earlier date applies.
Note 2: Pressure testing is not required for MC 330 or MC 331 cargo tanks in dedicated sodium metal service.
Note 3: Pressure testing is not required for uninsulated lined cargo tanks, with a design pressure MAWP 15 psig or less, which receive an external visual inspection and lining inspection at least once each year.
Note 4: Insulated cargo tanks equipped with manholes or inspection openings may perform either an internal visual inspection in conjunction
with the external visual inspection or a hydrostatic or pneumatic pressure-test of the cargo tank.
Note 5: A 10-year inspection interval period also applies to cargo tanks constructed of NQT SA–202 or NQT SA–455 steels provided the materials have full-size equivalent (FSE) Charpy vee notch (CVN) energy test data that demonstrated 75% shear-area ductility at 32 °F with an average of 3 or more samples >15 ft-lb FSE with no sample <10 ft-lb FSE.
tkelley on DSK3SPTVN1PROD with PROPOSALS3
*
*
*
*
*
(d) * * *
(3) All reclosing pressure relief valves
must be externally inspected for any
corrosion or damage which might
prevent safe operation. All reclosing
pressure relief valves on cargo tanks
carrying lading corrosive to the valve
must be removed from the cargo tank for
inspection and testing. Each reclosing
pressure relief valve required to be
removed and tested must be tested
according to the requirements set forth
in paragraph (j) of this section.
*
*
*
*
*
(g) * * *
(1) * * *
(ii) All self-closing pressure relief
valves, including emergency relief vents
and normal vents, must be removed
from the cargo tank for inspection and
testing according to the requirements set
forth in paragraph (j) of this section.
*
*
*
*
*
(j) Pressure Vent Bench Test. When
required by this section, pressure relief
valves must be tested for proper
function as follows:
(1) Each self-closing pressure relief
valve must open and reseat to a
leaktight condition at the pressures
prescribed for the applicable cargo tank
specification or at the following
pressures:
(i) For MC 306 cargo tanks:
(A) With MC 306 reclosing pressure
relief valves: Must open at not less than
3psi and not more than 4.4 psi and must
reseat to a leak tight-condition at no less
than 2.7 psi.
(B) With reclosing pressure relief
valves modified as provided in
VerDate Sep<11>2014
19:36 Jan 22, 2015
Jkt 235001
§ 180.405(c) of this part to conform with
DOT 406 specifications: According to
the pressures set forth for a DOT 406
cargo tank in § 178.346–3 of this
subchapter.
(ii) For MC 307 cargo tanks:
(A) With MC 307 reclosing pressure
relief valves: Must open at not less than
the cargo tank MAWP and not more
than 110% of the cargo tank MAWP and
must reseat to a leak tight-condition at
no less than 90% of the cargo tank
MAWP.
(B) With reclosing pressure relief
valves modified as provided in
§ 180.405(c) of this part to conform with
DOT 407 specifications: According to
the pressures set forth for a DOT 407
cargo tank in § 178.347–4 of this
subchapter.
(iii) For MC 312 cargo tanks:
(A) With MC 312 reclosing pressure
relief valves: Must open at not less than
the cargo tank MAWP and not more
than 110% of the cargo tank MAWP and
must reseat to a leak tight-condition at
no less than 90% of the cargo tank
MAWP.
(B) With reclosing pressure relief
valves modified as provided in
§ 180.405(c) of this part to conform with
DOT 412 specifications: According to
the pressures set forth for a DOT 412
cargo tank in § 178.348–4 of this
subchapter.
(iv) For MC 330 or MC 331 cargo
tanks: Must open at not less than the
required set pressure and not more than
110% of the required set pressure and
must reseat to a leak-tight condition at
no less than 90% of the required set
pressure.
PO 00000
Frm 00052
Fmt 4701
Sfmt 9990
(v) For DOT 400-series cargo tanks:
According to the pressures set forth for
the applicable cargo tank specification
in §§ 178.346–3, 178.347–4, and
178.348–4, respectively, of this
subchapter.
(vi) For cargo tanks not specified in
this paragraph: Must open at not less
than the required set pressure and not
more than 110% of the required set
pressure and must reseat to a leak-tight
condition at no less than 90% of the
required set pressure or the pressure
prescribed for the applicable cargo tank
specification.
(2) Normal vents (1 psig vents) must
be tested according to the testing criteria
established by the valve manufacturer.
(3) Self-closing pressure relief devices
not tested or failing the tests in this
paragraph (j)(1) must be repaired or
replaced.
§ 180.503
[Amended]
62. In section 180.503, under the
definition of Qualification, ‘‘AAR Tank
Car Manual’’ is removed and ‘‘AAR
Specifications for Tank Cars’’ is added
in its place.
*
*
*
*
*
■
Issued in Washington, DC, on January 7,
2015 under authority delegated in 49 CFR
Part 1.97.
Magdy El-Sibaie,
Associate Administrator for Hazardous
Materials Safety, Pipeline and Hazardous
Materials Safety Administration.
[FR Doc. 2015–00265 Filed 1–22–15; 8:45 am]
BILLING CODE 4910–60–P
E:\FR\FM\23JAP3.SGM
23JAP3
Agencies
[Federal Register Volume 80, Number 15 (Friday, January 23, 2015)]
[Proposed Rules]
[Pages 3787-3838]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2015-00265]
[[Page 3787]]
Vol. 80
Friday,
No. 15
January 23, 2015
Part III
Department of Transportation
-----------------------------------------------------------------------
Pipeline and Hazardous Materials Safety Administration
-----------------------------------------------------------------------
49 CFR Parts 107, 171, 172 et al.
Hazardous Materials: Miscellaneous Amendments (RRR); Proposed Rule
Federal Register / Vol. 80 , No. 15 / Friday, January 23, 2015 /
Proposed Rules
[[Page 3788]]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Pipeline and Hazardous Materials Safety Administration
49 CFR Parts 107, 171, 172, 173, 175, 176, 177, 178, 179 and 180
[Docket No. PHMSA-2013-0225 (HM-218H)]
RIN 2137-AF04
Hazardous Materials: Miscellaneous Amendments (RRR)
AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA),
DOT.
ACTION: Notice of Proposed Rulemaking (NPRM).
-----------------------------------------------------------------------
SUMMARY: PHMSA proposes to make miscellaneous amendments to the
Hazardous Materials Regulations to update and clarify certain
regulatory requirements. These proposed amendments are designed to
promote safer transportation practices, address petitions for
rulemaking, respond to National Transportation Safety Board (NTSB)
Safety Recommendations, facilitate international commerce, make
editorial corrections, and simplify the regulations. The proposed
provisions in this rulemaking include, but are not limited to, removing
the packing group (PG) II designation for certain organic peroxides,
self-reactive substances and explosives, incorporating requirements for
trailers of manifolded acetylene cylinders, and providing requirements
to allow for shipments of damaged wet electric batteries. In addition,
this rulemaking proposes to revise the requirements for the packaging
of nitric acid, testing of pressure relief devices on cargo tanks, and
shipments of black or smokeless powder for small arms.
DATES: Comments must be received by March 24, 2015.
ADDRESSES: You may submit comments by any of the following methods:
Federal Rulemaking Portal: https://www.regulations.gov.
Follow the instructions for submitting comments.
Fax: 202-493-2251.
Mail: Dockets Management System; U.S. Department of
Transportation, Dockets Operations, M-30, Ground Floor, Room W12-140,
1200 New Jersey Avenue SE., Washington, DC 20590-0001.
Hand Delivery: To U.S. Department of Transportation,
Dockets Operations, M-30, Ground Floor, Room W12-140, 1200 New Jersey
Avenue SE., Washington, DC 20590-0001, between 9:00 a.m. and 5:00 p.m.,
Monday through Friday, except Federal holidays.
Instructions: Include the agency name and docket number PHMSA-2013-
0225 (HM-218H) or rule identification number (RIN 2137-AF04) for this
rulemaking at the beginning of your comment. Note that all comments
received will be posted without change to https://www.regulations.gov
including any personal information provided. If sent by mail, comments
must be submitted in duplicate. Persons wishing to receive confirmation
of receipt of their comments must include a self-addressed stamped
postcard.
Privacy Act: Anyone is able to search the electronic form of any
written communications and comments received into any of our dockets by
the name of the individual submitting the document (or signing the
document, if submitted on behalf of an association, business, labor
union, etc.). You may review DOT's complete Privacy Act Statement at
https://www.dot.gov/privacy.
Docket: You may view the public docket through the Internet at
https://www.regulations.gov or in person at the Docket Operations office
at the above address (See ADDRESSES).
FOR FURTHER INFORMATION CONTACT: Neal Suchak or Aaron Wiener, Standards
and Rulemaking Division, (202) 366-8553, Pipeline and Hazardous
Materials Safety Administration, U.S. Department of Transportation,
1200 New Jersey Avenue SE., Washington, DC 20590-0001.
SUPPLEMENTARY INFORMATION:
Contents
I. Background
II. Incorporation by Reference Discussion Under 1 CFR part 51
III. Petitions for Rulemaking and National Transportation Safety
Board Recommendations
IV. Section-by-Section Review
V. Regulatory Analyses and Notices
A. Statutory/Legal Authority for the Rulemaking
B. Executive Order 12866, Executive Order 13563 and DOT
Regulatory Policies and Procedures
C. Executive Order 13132
D. Executive Order 13175
E. Regulatory Flexibility Act, Executive Order 13272, and DOT
Procedures and Policies
F. Paperwork Reduction Act
G. Regulatory Identifier Number (RIN)
H. Unfunded Mandates Reform Act
I. Environmental Assessment
J. Privacy Act
K. International Trade Analysis
I. Background
The purpose of this NPRM is to update and clarify the Hazardous
Materials Regulations (HMR; 49 CFR parts 171-180) based on PHMSA's own
initiatives. The proposed changes were identified through an extensive
review of the HMR and letters of interpretation issued to the public.
In addition, this NPRM proposes regulatory requirements that respond to
seven petitions for rulemaking and addresses two NTSB Safety
Recommendations. To this end, PHMSA is proposing to revise, clarify,
and ease certain regulatory requirements.
A. Petitions for Rulemaking
The following table provides a brief summary of the petitions
addressed in this NPRM and affected sections. These petitions are
included in the docket for this proceeding:
------------------------------------------------------------------------
Petition Petitioner Summary
------------------------------------------------------------------------
P-1590.......... Dangerous Goods Remove the PG II designation for
Advisory Council certain organic peroxides, self-
(DGAC). reactive substances and
explosives in the Sec. 172.101
Hazardous Materials Table (HMT).
P-1591.......... Air Products and Amend the marking requirements
Chemicals, Inc. for poisonous by inhalation
shipments transported in
accordance with the
International Maritime Dangerous
Goods (IMDG) Code or Transport
Canada's Transport of Dangerous
Goods (TDG) Regulations (Sec.
171.23).
P-1597.......... DGAC............... Require that emergency response
telephone numbers be displayed
on shipping papers numerically
(Sec. 172.604).
P-1601.......... United Parcel Amend the packaging instructions
Service (UPS). for certain shipments of nitric
acid by requiring intermediate
packaging for glass inner
packagings (Sec. 173.158).
P-1604.......... National Propane Extend the pressure test and
Gas Association internal visual inspection test
(NPGA). period to ten years for certain
MC 331 cargo tanks in dedicated
propane delivery service (Sec.
180.407).
P-1605.......... Compressed Gas Incorporate by reference in Sec.
Association (CGA). 171.7 CGA Pamphlet G-1.6,
Standard for Mobile Acetylene
Trailer Systems, Seventh Edition
(Sec. Sec. 171.7 and
173.301).
[[Page 3789]]
P-1609.......... Truck Trailer Clarify the requirements
Manufacturers applicable to the testing of
Association (TTMA). pressure relief devices for
cargo tank motor vehicles (Sec.
180.407).
------------------------------------------------------------------------
B. NTSB Safety Recommendations
The following table provides a brief summary of the NTSB
recommendations addressed in this NPRM and affected sections. These
recommendations are included in the docket for this proceeding:
------------------------------------------------------------------------
Recommendation Summary
------------------------------------------------------------------------
H-09-01....................... Modify 49 CFR Sec. 173.301 to clearly
require (1) that cylinders be securely
mounted on mobile acetylene trailers
and other trailers with manifolded
cylinders to reduce the likelihood of
cylinders being ejected during an
accident and (2) that the cylinder
valves, piping, and fittings be
protected from multidirectional impact
forces that are likely to occur during
highway accidents, including rollovers.
H-09-02....................... Require fail-safe equipment that ensures
that operators of mobile acetylene
trailers can perform unloading
procedures only correctly and in
sequence.
------------------------------------------------------------------------
C. Amendments Based on PHMSA Review
In addition to addressing the petitions for rulemaking and the NTSB
recommendations listed above, this rulemaking proposes the following
amendments that were identified through our retrospective review of the
49 CFR. We summarize the changes as follows:
Revise Sec. 107.402(d)(2) to replace the term ``citizen''
with the term ``resident.''
Revise Sec. 107.402(e) to require that a lighter
certification agency submits a statement that the agency is independent
of and not owned by a lighter manufacturer, distributor, import or
export company, or proprietorship.
Revise Sec. 107.402(f) to require portable tank and
multi-element gas container (MEGC) certification agencies to submit a
statement indicating that the agency is independent of and not owned by
a portable tank or MEGC manufacturer, owner, or distributor.
Revise Sec. 107.807 to require a cylinder inspection
agency to be independent of and not owned by a cylinder manufacturer,
owner, or distributor.
Remove the entry for CGA Pamphlet C-1.1 in Table 1 to
Sec. 171.7.
Incorporate by reference updated versions of the American
Association of Railroads (AAR) Manual of Standards and Recommended
Practices, Section C-III, Specifications for Tank Cars, Specification
M-1002 in Sec. 171.7.
Revise the Sec. 172.101 table to add Special Provision
B120 to Column (7) for the entry ``Calcium nitrate, UN1454.''
Revise the entry for ``Propellant, solid, UN0501'' to
remove vessel stowage provision 24E from Column (10B) of the HMT.
Revise the PG II HMT entry for ``UN2920, Corrosive
liquids, flammable, n.o.s.,'' to for consistency with the UN Model
Regulations, IMDG Code, and the ICAO TI such that this entry is
eligible for the limited quantity exceptions.
Revise the PG II HMT entry for ``UN3085, Oxidizing solid,
corrosive, n.o.s.'' for consistency with the UN Model Regulations, IMDG
Code and the ICAO TI such that this entry is eligible for the limited
quantity exceptions.
Revise the HMT entries for ``Trinitrophenol (picric acid),
wetted, with not less than 10 percent water by mass, UN3364'' and
``Trinitrophenol, wetted with not less than 30 percent water, by mass,
UN1344'' to harmonize the HMR with the UN Model Regulations, IMDG Code,
and the ICAO TI to clarify that the 500 gram limit per package does not
apply to UN1344 but does apply to UN3364.
Revise Special Provision 136, assigned to the proper
shipping name ``UN3363, Dangerous goods in machinery or apparatus,'' in
Sec. 172.102 to include reference to Subpart G of Part 173.
Remove reference to obsolete Special Provision 18 for the
HMT entry ``UN1044, Fire extinguishers'' and in Sec. 180.209(j) and
provide correct cross reference to Sec. 173.309.
Correct a reference in Sec. 172.201 to exceptions for the
requirement to provide an emergency response telephone number on a
shipping paper.
Revise Sec. Sec. 172.301(f), 172.326(d) and 172.328(e) to
include the clarification that the NOT-ODORIZED or NON-ODORIZED marking
may appear on packagings used for both unodorized and odorized
liquefied petroleum gas (LPG), and remove the effective date of October
1, 2006 or ``after September 30, 2006,'' if it appears in these
paragraphs, as the effective date has passed.
Amend Sec. 172.406(d) by clearly authorizing the use of
labels described in Subpart E with a dotted or solid line outer border
on a surface background of contrasting color.
Update a mailing address in Sec. 172.407(d)(4)(ii).
Clarify the marking size requirements for an intermediate
bulk container (IBC) that is labeled instead of placarded by replacing
the bulk package marking reference in Sec. 172.514(c) with the non-
bulk marking reference, specifically, Sec. 172.301(a)(1).
Revise Sec. 173.4a(a) to clarify that articles (including
aerosols) are not eligible for excepted quantity reclassification under
Sec. 173.4a, although some are eligible to be shipped as small
quantities by highway and rail in Sec. 173.4.
Revise Sec. 173.21(e) to prohibit transportation or
offering for transportation materials in the same transport vehicle
(e.g., a trailer, a rail car) with another material, that could cause a
dangerous evolution of heat, flammable or poisonous gases or vapors, or
produce corrosive materials if mixed.
Clarify that the requirements provided in paragraph Sec.
173.24a(c)(1)(iv) do not apply to limited quantities packaged in
accordance with Sec. 173.27(f)(2).
Clarify the quantity limits for mixed contents packages
prepared in accordance with Sec. 173.27(f)(2).
Clarify the requirements applicable to bulk transportation
of combustible liquids by adding new subparagraph Sec.
173.150(f)(3)(xi) stating that the registration requirements in Subpart
G of Part 107 are applicable and revising Sec. Sec. 173.150(f)(3)(ix)
and 173.150(f)(3)(x) for punctuation applicable to a listing of
requirements.
Add a new paragraph (j) in Sec. 173.159 to allow shippers
to prepare for transport and offer into transportation damaged wet
electric storage batteries.
[[Page 3790]]
Revise Sec. 173.166(e)(6) to add the words ``or cargo
vessel.''
Revise Sec. Sec. 173.170 and 173.171 by changing the term
motor vehicle to transport vehicle to allow for motor vehicles
comprised of more than one cargo-carrying body to carry 100 pounds of
black or smokeless powder reclassed as Division 4.1 in each cargo-
carrying body instead of 100 pounds total in the motor vehicle.
Revise Sec. 173.199(a)(4) by removing the reference to
the steel rod impact test in Sec. 178.609(h).
Clarify the Packing Method table for organic peroxide
materials in Sec. 173.225.
Amend the bulk packaging section reference in Column (8C)
of the HMT from Sec. 173.240 to Sec. 173.216 for the entries
``Asbestos, NA2212,'' ``Blue asbestos (Crocidolite) or Brown asbestos
(amosite, mysorite) UN2212,'' and ``White asbestos (chrysotile,
actinolite, anthophyllite, tremolite), UN2590.'' In addition, we are
proposing to revise paragraph (c)(1) in Sec. 173.216 by authorizing
the use of bulk packages prescribed in Sec. 173.240.
Add a new paragraph (d)(5) to Sec. 173.304a, a new
paragraph (h) to Sec. 173.314 and revise Sec. 173.315(b)(1) to
require odorization of liquefied petroleum gas when contained in
cylinders and rail cars.
Amend Sec. 173.306(k) to clarify that aerosols shipped
for recycling or disposal by motor vehicle containing a limited
quantity are afforded the applicable exceptions provided for ORM-D
materials granted under Sec. Sec. 173.306(i) and 173.156(b).
Create a new paragraph (d) in Sec. 175.1 stating that the
HMR do not apply to dedicated air ambulance, firefighting, or search
and rescue operations.
Correct Sec. 175.8 by adding the appropriate 14 CFR, Part
125 citations.
Clarify exceptions for passengers, crewmembers, and air
operators in paragraphs (a)(18), (a)(22), and (a)(24) of Sec. 175.10
for the carriage of hazardous materials aboard a passenger aircraft.
Clarify Sec. 175.75(e)(2) by replacing the word
``located'' with ``certificated.''
Clarify Sec. 176.30(a)(4) by replacing the word
``packaging'' with ``package.''
Clarify that the loading restrictions in Sec.
177.835(c)(1) through (4) are applicable to Sec. 177.848(e).
Revise Sec. 178.65(i)(1) to correctly reference the
manufacturer's report requirements in Sec. 178.35(g).
Clarify Sec. 178.337-17(a) to eliminate confusion of the
name plate and specification plate requirements.
Correct an editorial error in the formula in Sec.
178.345-3(c)(1).
Include provisions consistent with the non-bulk packaging
and IBC approval provisions for Large Packagings in Sec. 178.955.
Clarify the requirements for Federal Railroad
Administration (FRA) approval of tank car designs in Sec. 179.13.
Revise Sec. 180.401 to replace the term ``person'' with
``hazmat employee or hazmat employer'' to clarify that Subpart E of
Part 180 does not only apply to persons offering or transporting
hazardous materials.
II. Incorporation by Reference Discussion Under 1 CFR Part 51
The American Association of Railroads (AAR) Manual of Standards and
Recommended Practices, Section C-III, Specifications for Tank Cars,
Specification M-1002 and the Compressed Gas Association (CGA) pamphlet
G-1.6, Standard for Mobile Acetylene Trailer Systems, Seventh Edition
(G-1.6, 2011) are available for interested parties to purchase in
either print or electronic versions through the parent organization Web
sites. The price charged for these standards to interested parties
helps to cover the cost of developing, maintaining, hosting, and
accessing these standards. The specific standards are discussed in
greater detail in the following analysis.
III. Petitions for Rulemaking and National Transportation Safety Board
Recommendations
A. Amendments to the HMR for Organic Peroxides, Self-Reactive
Substances and Explosives (P-1590)
In P-1590, DGAC requests that PHMSA amend the HMR by removing the
PG II designation in Column (5) of the Sec. 172.101 HMT for all
organic peroxides (Division 5.2), self-reactive substances (Division
4.1), and explosives (Class 1). DGAC states that under both the HMR and
international regulations, organic peroxides, self-reactive substances
and explosives are not assigned a packing group. Despite the absence of
regulatory language for determining a packing group assignment for
these materials, proper shipping names for these materials listed in
the HMT are assigned a default PG II. DGAC asserts that the presence of
a PG assignment for these entries is a constant source of confusion
which leads to frustration of shipments. DGAC further indicates that
frustration typically occurs when shipping papers are inspected by
carrier staff and enforcement personnel along the transport chain with
respect to the Sec. 172.202(a)(4) requirement to include the ``packing
group in Roman numerals, as designated for the hazardous material in
Column (5) of the Sec. 172.101 table.''
DGAC notes that while Sec. 172.202(a)(4) also excepts organic
peroxides, self-reactive substances and explosives from the requirement
to provide a PG as part of the required description, a great deal of
confusion is created given that, irrespective of this exception, PGs
are provided for these materials in the Sec. 172.101 HMT. DGAC also
states that the HMR are inconsistent with international regulations as
a PG is not indicated for these materials in the hazardous materials
tables in the ICAO TI, IMDG Code, and the UN Model Regulations. In
addition, those regulations restrict the provision of a PG in the
transport document basic description to materials where a PG has been
assigned in accordance with classification requirements. With no PG
indicated for these substances in the respective lists, it is
inappropriate to provide a PG in the hazardous materials description on
a shipping paper under international regulations. Consequently,
provision of a PG for domestic transportation would constitute a
violation of international regulations for international
transportation.
DGAC states that removing the PG for these materials from the HMT
would impose no additional costs and would result in a net savings
since many unnecessary delays in hazardous material shipments would be
avoided. DGAC did not provide a specific figure for the anticipated net
savings.
DGAC also states that the packaging provisions in Part 173 for
these materials indicate the level of performance required. Therefore,
although certain packagings must meet PG II performance levels, they do
not indicate a degree of danger or the variation to PG I or PG III
packagings.
In response to DGAC's petition, PHMSA agreed that it merited a
rulemaking change. We recognize that when the PG does not relate to the
degree of hazard of the material based on classification criteria but
rather is broadly assigned to an entire group of materials for purposes
of applying regulatory requirements, there is limited value in
requiring an indication of the PG on a shipping paper. Therefore PHMSA
is proposing to remove the PG II designation from Column (5) of the HMT
for organic peroxides (Division 5.2), self-reactive substances
(Division 4.1), and explosives (Class 1). PHMSA seeks comment on the
safety implications of such a change as well as the net benefit such a
change (i.e., decrease in the number of frustrated shipments) would
provide.
[[Page 3791]]
B. Marking Requirements for Poison by Inhalation Materials (P-1591)
In P-1591, Air Products and Chemicals, Inc., requests that PHMSA
amend the marking requirements for poison inhalation hazard (PIH)
materials that are shipped in accordance with the IMDG Code or TDG
Regulations. Specifically, the petitioner requests that PHMSA modify
Sec. Sec. 171.23(b)(10)(iv)(A) and 171.23(b)(10)(iv)(B) to remove the
phrase ``regardless of the total quantity contained in the transport
vehicle or freight container'' in both paragraphs to align Part 171,
Subpart C requirements for use of international regulations with the
poisonous hazardous material marking requirements in Sec. 172.313(c),
which offers exceptions based on Hazard Zone, quantity, and number of
distinct materials.
Specifically, subpart C of Part 171 specifies requirements for
shipments offered for transportation or transported in the United
States under international regulations. For PIH material, subparagraphs
(A) and (B) of Sec. 171.23(b)(10)(iv) require that ``the transport
vehicle or freight container must be marked with the identification
numbers for the hazardous material, regardless of the total quantity
contained in the transport vehicle or freight container, in the manner
specified in Sec. 172.313(c) of this subchapter and placarded as
required by subpart F of part 172 of this subchapter.'' The petitioner
states that the phrase ``regardless of the total quantity contained in
the transport vehicle or freight container'' gives the appearance that
the identification number marking requirement is applicable to any
quantity. However, the remainder of the sentence states that the
marking must be ``in the manner specified in in Sec. 172.313(c) of
this subchapter,'' which indicates an entirely different requirement.
Section 172.313(c) specifies marking requirements for non-bulk
packages of PIH material contained in transport vehicles or freight
containers subject to certain provisions and limitations. Section Sec.
172.313(c)(2) states, ``the transport vehicle or freight container is
loaded at one facility with 1,000 kg (2,205 pounds) or more aggregate
gross weight of the material in non-bulk packages marked with the same
proper shipping name and identification number'' meaning that unless
this criteria is met, marking the identification number on the
transport vehicle or freight container is not required. The petitioner
indicates the inconsistency of Sec. Sec. 171.23(b)(10)(iv)(A),
171.23(b)(10)(iv)(B) and 172.313(c) is a source of confusion.
The petitioner also identifies a potential discrepancy when
transporting internationally to or from the United States in accordance
with Sec. 171.23. The requirement to mark all quantities of PIH
material is more restrictive and costly than the current marking
requirements for the same materials when transported domestically under
the HMR in accordance with Sec. 172.313(c). The petitioner points out
that under both the IMDG and TDG there are no additional marking
requirements for transport units carrying PIH materials in non-bulk
packages similar to the provisions found in Sec. 172.313(c).
Therefore, for quantities of PIH materials in non-bulk packages (less
than 1,000 kg per UN number) all three regulations are not aligned.
The petitioner states they have had numerous shipments of PIH
materials frustrated because of this confusing requirement, and that
the additional marking causes economic hardship and transit delays due
to additional labor necessary to apply the extra UN identification
numbers at the port. The petitioner did not provide a specific cost
figure for these frustrated shipments or anticipated net savings of a
regulatory change.
In response to Air Products' petition, PHMSA agreed that it merited
a rulemaking change. The intent of the requirements in Sec.
171.23(b)(10)(iv) is to provide hazard communication for international
shipments of PIH materials transiting the United States under either
the IMDG Code or TDG equivalent to those established in the HMR, not to
impose more restrictive requirements. The removal of the phrase
referring to a ``total quantity'' will reduce potential confusion due
to differences in inspection interpretations and will reduce handling
costs and transit time while maintaining an acceptable level of hazard
communication for PIH materials. Therefore, PHMSA is proposing to amend
Sec. Sec. 171.23(b)(10)(iv)(A) and 171.23(b)(10)(iv)(B) by removing
the phrase ``regardless of the total quantity contained in the
transport vehicle or freight container'' from each subparagraph. PHMSA
seeks comment on the safety implications of such a change as well as
the net benefit such a change (i.e., decrease in the number of
frustrated shipments) would provide.
C. Emergency Response Telephone Number (P-1597)
In P-1597, DGAC requests that PHMSA amend the emergency response
telephone number requirements to prohibit the use of alphanumeric
telephone numbers and only permit numeric telephone numbers. Currently,
the HMR do not limit the telephone numbers to be numeric under Sec.
172.604(a). DGAC states that historically telephone faces associated
integers with letters (e.g., 2\ABC\), but this is no longer the case in
all instances of phones. As a result, emergency response telephone
numbers presented alphanumerically could cause delays in acquiring
emergency response information as the first responder would have to
first convert letters to numbers. These delays are undesirable in time
sensitive emergency response situations.
DGAC further points out that PHMSA issued a letter of
interpretation (Ref. No. 04-0032) confirming that alphanumeric
presentation of an emergency response telephone number was acceptable
but expressed concern in the delays it may cause.
In response to DGAC's petition, PHMSA agreed that it merited a
rulemaking change. We agree that the continued use of alphanumeric
telephone numbers could cause unnecessary delays in emergency response
situations, therefore, PHMSA is proposing to revise Sec. 172.604(a) to
require a numeric format for the presentation of emergency response
telephone numbers in association with a shipping paper. Additionally,
we request specific comment on the cost implications of this proposed
revision.
D. Packaging Requirements for Nitric Acid (P-1601)
In P-1601, the United Parcel Service (UPS) requests that PHMSA
revise the packaging requirements for ground shipments of nitric acid.
Its petition was based on four loading and sorting operation incidents
which occurred over a six-month period. The incidents did not result in
any casualties, but varying degrees of property damage were assessed in
each situation. UPS notes that each incident involved the same
packaging configuration--glass inner packagings within fiberboard outer
packagings. In each case, a breach of one or more inner packagings
caused leakage, resulting in fumes, followed by the initiation of a
fire involving the fiberboard outer packaging material. UPS believes
that the packaging requirements of the HMR applicable to ground
shipments of nitric acid do not adequately address the hazards present.
As provided in Sec. 173.158, packaging for ground shipments of
nitric acid prescribe either outer packaging that is not reactive to
contents, or a combination packaging that includes non-reactive
intermediate packaging
[[Page 3792]]
and absorbent material. However, for concentrations of less than 90%
nitric acid, the HMR permit the use of glass inner packagings of less
than 2.5 L placed inside UN Specification 4G, 4C1, 4C2, 4D or 4F outer
packagings. This latter configuration is associated with the four
incidents referenced by UPS in its petition for rulemaking.
UPS proposes that PHMSA change Sec. 173.158(e) to enhance the
packaging requirements applicable to nitric acid in concentrations less
than 90%. Under the proposal in P-1601, when in wooden or fiberboard
outer packaging, glass inner packagings used in the configuration
prescribed in Sec. 173.158(e) would be required to be packed in
tightly-closed, non-reactive intermediate packagings and cushioned with
a non-reactive absorbent material. UPS feels that the addition of this
intermediate packaging would properly address the hazards present in
this concentration of nitric acid and would have prevented the above
incidents from occurring.
The UPS petition identified an increase in the number of fires
caused by spilled nitric acid reacting with fiberboard packaging. In
this NPRM, PHMSA is considering a performance standard for packaging
and handling the product that would prevent breakages and spills
involving nitric acid. Based on the number of incidents noted in the
petition for rulemaking and the cost incurred, in response to UPS's
petition, PHMSA agreed that it merited consideration of a rulemaking
change. Therefore, PHMSA is proposing to require in Sec. 173.158(e)
that when nitric acid, in concentrations less than 90%, is placed in
glass inner packagings to be packaged in wooden or fiberboard outer
packaging, the glass inner packagings must be packed in tightly-closed,
non-reactive intermediate packagings and cushioned with a non-reactive
absorbent material. PHMSA is seeking comment on whether or not this
proposed packaging should be applied to other similar materials as well
as cost burdens from the increase in packaging requirements.
E. Pressure Test and Internal Visual Inspection Requirements for MC 331
Cargo Tanks (P-1604)
In P-1604, the National Propane Gas Association (NPGA) requests
PHMSA modify the pressure test and visual inspection test requirements
applicable to certain MC 331 specification cargo tanks in dedicated
propane delivery service, commonly known as bobtails, found in Sec.
180.407(c) . Currently, the HMR require periodic pressure testing and
visual inspection every five years to remain in service. NPGA petitions
PHMSA to extend the requalification period for certain MC 331 cargo
tanks from five years to ten years and provides a technical case for
this change.
NPGA states in its petition that the five-year requalification
period for bobtails is a burden to the propane industry. It states that
these cargo tanks must be taken out of service for a period of up to a
week and that water is introduced into the tank during the
requalification process, which can be detrimental to the tank and
product contained in the tank. Before a tank can be returned to
service, it must be completely free of any water. NPGA states that this
removal from service hinders a propane company's operations.
In 2001, NPGA conducted a survey to determine whether companies
that performed the five-year hydrostatic test requirement had
experienced any failures. None of the 203 survey respondents reported a
hydrotest failure for tanks of less than 3,500 gallons water capacity.
Based on the results of this survey, the NPGA sponsored a study by a
non-profit research and development organization (the Battelle Memorial
Institute) to determine whether a change to the requalification period
would be technically feasible. Battelle developed crack growth models
to estimate the time to failure of a tank that has undergone several
pressure cycles. They also analyzed effects on the MC 331 cargo tank
under the delivery service load conditions to determine the estimated
life of the tank.
Based on the results of this study, the NPGA and Battelle recommend
that PHMSA modify the requalification period from five years to ten
years for MC 331 cargo tanks that: (1) Are used in dedicated propane
service; (2) have a water capacity less than 3,500 gallons; and (3) are
constructed of: non-quenched and tempered (NQT) SA-612 steel and NQT
SA-202 or SA-455 steels, provided the materials have full-size
equivalent (FSE) Charpy-V notch energy test data that demonstrates 75%
shear-area ductility at 32[emsp14][deg]F with an average of three or
more samples greater than 15 ft-lb FSE, and with none less than 10 ft-
lb FSE. A copy of this study is in the docket for this rulemaking.
After considering the NPGA survey results, which cite no reported
incidents, and the study commissioned by the NPGA, PHMSA determined
that the petition merited consideration of a rulemaking change. NPGA
notes there is a strong safety record amongst its members regarding
this issue and the cost savings to the industry would be significant (a
specific benefit was not provided by the NPGA). Therefore, PHMSA is
proposing to revise the pressure test and internal visual inspection
requirements found in Sec. 180.407(c) for certain MC 331 Specification
cargo tanks from a five-year requalification period to a ten-year
period. PHMSA seeks comment on the safety implications of such a change
as well as the net benefit such a change (i.e., decrease in time out of
service) would provide.
F. Mobile Acetylene Trailer Systems (P-1605) and NTSB Safety
Recommendations H-09-01 and H-09-02
In P-1605, the CGA requests that PHMSA amend the HMR to incorporate
a reference to CGA pamphlet G-1.6, Standard for Mobile Acetylene
Trailer Systems, Seventh Edition (G-1.6, 2011). This standard provides
minimum requirements necessary for the design, construction, and
operation of mobile acetylene trailer systems, which consist of
acetylene cylinders mounted and manifolded for the purposes of
charging, transporting, and discharging acetylene. It also covers
ground-mounted auxiliary equipment used with mobile acetylene trailers
such as piping, meters, regulators, flash arrestors, and fire
protection equipment.
This petition coincides with two NTSB recommendations (H-09-01 and
H-09-02) issued to PHMSA based on incidents involving mobile acetylene
trailers.\1\ In response to CGA's petition and its appropriateness to
addressing the NTSB recommendations, PHMSA determined that it warranted
consideration of a rulemaking change. Further detailed discussion of
this issue can be found in the Section-by-Section review for Sec.
173.301.
---------------------------------------------------------------------------
\1\ https://phmsa.dot.gov/staticfiles/PHMSA/DownloadableFiles/Files/NTSB%20Files/H_09_1_2_Original.pdf.
---------------------------------------------------------------------------
G. Pressure Relief Devices for Cargo Tanks (P-1609)
In P-1609, the Truck Trailer Manufacturers Association (TTMA)
requests that PHMSA amend the Sec. 180.407 requirements applicable to
pressure relief devices (PRDs). Specifically, TTMA requests that PHMSA
revise the HMR to more clearly establish the set pressure of a PRD for
each of the DOT specification cargo tank motor vehicles. TTMA states
that the wording of Sec. Sec. 180.407(d)(3) and 180.407(g)(1)(ii),
applicable to the testing requirements for PRDs, creates issues for
persons performing the testing of a PRD.
TTMA points out two specific issues with these paragraphs. The
first is the
[[Page 3793]]
term ``set-to-discharge.'' On April 9, 2009 PHMSA published a final
rule (Docket No. PHMSA-2006-25910 (HM-218E); 74 FR 16135; effective May
11, 2009), where in an attempt to harmonize with international
standards, PHMSA removed the phrase ``set-to-discharge,'' and ``start-
to-discharge'' was substituted in its place. TTMA explains that this is
an issue because the discharge pressure referenced is used to figure
the minimum pressure at which the PRD should reseat. By changing the
wording from ``set'' to ``start,'' the reseating pressure changed from
a design requirement, to one based on what a given vent actually does
under test. Therefore, instead of testing a PRD knowing its reseating
requirements, testers must perform the test of a given PRD and
calculate the reseating pressure of that particular PRD and retest from
that pressure. Essentially, testers of PRDs could test identical
products at different pressures because the reseat pressure is no
longer a fixed design requirement. This creates inconsistencies between
the reseating pressures of comparable PRDs authorized for identical
hazardous materials service. TTMA states that this compromises safety,
instead of promoting it.
The second issue TTMA points out in its petition is in regards to
the term ``the required set pressure.'' This term is problematic in
relation to the continuing operation of existing cargo tanks made to
older specifications in Sec. 180.405(c). As the codes for the older
specifications of cargo tanks are no longer published, determining
``the required set pressure'' is problematic. This is an issue for
current specifications of cargo tanks as well. There are pressure
allowances during the retesting of pressure relief devices of no more
than 110% of the required set pressure (Sec. 180.407(d)(3)) and the
same 10% allowance for DOT 400 series cargo tanks (Sec. 178.345-10(d))
creates confusion for current specification cargo tanks. TTMA believes
this will create an unsafe condition for tanks, as a PRD is no longer
functioning as designed by the manufacturer. The PRD may actually open
at higher pressures (near a cargo tank's test pressure) as opposed to
the appropriate lower design pressure.
TTMA petitions that PHMSA revise the HMR for testing of PRDs by
replacing the current requirements found in Sec. Sec. 180.407(d)(3)
and 180.407(g)(1)(ii) with a reference to a new paragraph, Sec.
180.407(j) which would detail the PRD test requirements. TTMA believes
this change will eliminate confusion for testers by clarifying the
requirements for opening and reseating pressures when beginning the
tests. This will also enhance the enforcement of these requirements by
creating consistency in the testing requirements for cargo tank PRDs of
the same design.
PHMSA determined that TTMA's petition merited consideration of a
rulemaking change based on the need for consistent and clear testing
requirements for PRDs on DOT specification cargo tanks. Therefore,
PHMSA is revising Sec. Sec. 180.407(d)(3) and 180.407(g)(1) to
reference a new section Sec. 180.407(j), which will outline the
testing requirements applicable to PRDs.
IV. Section-by-Section Review
Part 107
Section 107.402
This section sets forth the application requirements for
designation as a certification agency to issue certificates and
certifications for packagings designed, manufactured, tested, or
maintained in conformance with the HMR and standards set forth in the
UN Model Regulations. This section also sets forth the application
requirements for designation as a certification agency to issue
certificates and certifications for lighters, portable tanks, multi-
element gas containers, and Division 1.4G consumer fireworks.
PHMSA is proposing to revise Sec. 107.402(d)(1)(i) to indicate
that a fireworks certification agency applicant must be a U.S.
resident, or for a non-U.S. resident, must have a designated U.S. agent
representative as specified in Sec. 105.40. The criteria for fireworks
certification agencies were added to the HMR in Docket No. PHMSA-2010-
0320 (78 FR 42457) (HM-257). PHMSA intended for Sec. 107.402(d)(1)(i)
to correspond with the requirements of Sec. 105.40, which specifies
designated agents for non-residents; however, the term ``citizen'' was
inadvertently substituted for ``resident.'' PHMSA is proposing to
revise Sec. 107.402(d)(1)(i) by replacing the term ``citizen'' with
the term ``resident.''
PHMSA is also proposing to revise Sec. 107.402(e) to require that
a lighter certification agency submit a statement to the Associate
Administrator that the agency is independent of and not owned by a
lighter manufacturer, distributor, import or export company, or
proprietorship. Further, we propose to revise Sec. 107.402(f) to
require that a portable tank and MEGC certification agency submit a
statement to the Associate Administrator indicating that the agency is
independent of and not owned by a portable tank or MEGC manufacturer,
owner, or distributor. This language was included in Sec. 107.402 and
pertained to all certification agencies, but was removed inadvertently
as a result of changes made to the HMR in Docket No. PHMSA-2010-0320
(78 FR 42457) (HM-257).
Section 107.807
This section sets forth the requirements for authorizing chemical
analyses and tests for non-domestic manufacturers of DOT specification
or special permit cylinders. To maintain consistency with requirements
of other independent inspection agencies, PHMSA is proposing to revise
Sec. 107.807 to require that the agency submit a statement indicating
that the inspection agency is independent of and not owned by a
cylinder manufacturer, owner, or distributor.
Part 171
Section 171.7
The National Technology Transfer and Advancement Act of 1995 (15
U.S.C. 272) directs agencies to use voluntary consensus standards in
lieu of government-unique standards except where inconsistent with law
or otherwise impractical. Section 171.7 lists all standards
incorporated by reference into the HMR and informational materials not
requiring incorporation by reference. The informational materials not
requiring incorporation by reference are noted throughout the HMR and
provide best practices and additional safety measures that while not
mandatory, may enhance safety and compliance. Table 1 to Sec. 171.7
lists informational materials that are not incorporated by reference.
In a final rule published on January 28, 2008 (Docket No. 05-21812 (HM-
218D); 73 FR 4699, effective October 1, 2008), PHMSA added in Table 1
(formerly paragraph (b) of the section) an entry for the Compressed Gas
Association (CGA) publication, CGA C-1.1, Personnel Training and
Certification Guidelines for Cylinder Requalification by the Volumetric
Expansion Method. Following the publication of the final rule (HM-
218D), PHMSA received an appeal from Hydro-Test Products, Inc. (PHMSA-
2005 21812-0025) asking us to either remove the reference to CGA C-1.1
or add examples of other training materials that may be used. Hydro-
Test noted that referencing only the CGA publication in the HMR could
suggest that other training materials are not acceptable. PHMSA added
CGA C-1.1 as an example of guidance material that may be used to assist
requalifiers in creating their cylinder training
[[Page 3794]]
procedures and recordkeeping requirements. The publication is not a
standalone tool for training persons on how to perform requalification
of cylinders using the volumetric expansion test method. To alleviate
confusion for cylinder requalifiers, PHMSA intended to remove the
reference to CGA C-1.1 in Sec. Sec. 171.7 and 180.205 in a previous
editorial final rule published on October 1, 2008 (Docket No. PHMSA-
2008-0227 (HM-244A); 73 FR 57001, effective October 1, 2008). However,
PHMSA removed reference to the document only in Sec. 180.205(g)(6) and
inadvertently failed to remove the reference in Sec. 171.7. PHMSA is
proposing to amend Table 1 to Sec. 171.7 to remove the entry for CGA
C-1.1 to align the regulatory text with previous rulemaking actions.
Additionally, Sec. 171.7 incorporates by reference the American
Association of Railroad's (AAR's) Manual of Standards and Recommended
Practices, Section C-III, Specifications for Tank Cars, Specification
M-1002 (AAR Specifications for Tank Cars), October 2000 edition for
various tank car design, manufacture, inspection and testing, and
qualification regulations set forth in Parts 173, 179, and 180 of the
HMR. As currently incorporated by reference, all sections refer to the
October 2000 edition of this document.
AAR frequently updates the AAR Specifications for Tank Cars. While
the AAR updates this document, PHMSA has not received a petition for
rulemaking to revise the HMR to reflect more current versions of the
AAR Specifications for Tank Cars.
In this proposed rule, we are proposing to update the incorporation
by reference for this document to include revisions published by the
AAR in the 2007 edition of the AAR Specifications for Tank Cars and
certain subsequent amendments. PHMSA is also proposing to revise Sec.
179.24(a)(2) to remove the reference to the December 2000 edition of
this document and instead replace it with a generic reference to the
AAR Specifications for Tank Cars. Additionally, we are proposing to
revise Sec. 180.503 to replace the reference to the ``AAR Tank Car
Manual'' with ``AAR Specifications for Tank Cars'' for consistency with
references to this document elsewhere in the HMR. The FRA reviewed the
2007 standard and the subsequent amendments and determined not to
incorporate the 2007 standard in its totality. Under this proposed
rule, each chapter and appendix of the AAR Specifications for Tank Cars
will be listed in Sec. 171.7 with an effective date to account for the
most recent AAR amendments supported by FRA. In cases where FRA does
not support amendments made to the AAR Specifications for Tank Cars due
to safety concerns a prior effective date for that specific chapter or
appendix will be referenced, and in some cases, specific sections of
the chapter or appendix will be specifically not included. Upon
adoption into the HMR, entities subject to compliance with the HMR must
comply with the version of the chapters and appendices referred to in
Sec. 171.7 and effective on the date specified therein. AAR
publications such as this are available through the AAR as a benefit of
membership. We anticipate that affected entities already have access to
the AAR Specifications for Tank Cars we are proposing to incorporate.
Other interested parties may purchase these standards from the AAR for
$390.00. Moving forward, FRA will continue to evaluate amendments made
to the AAR Specifications for Tank Cars and will update the effective
dates for referenced chapters or appendices of the tank car manual, as
appropriate, when such amendments are supported by FRA.
Lastly, as described in Section IIF for petition for rulemaking P-
1605 and further discussed in the Section-by-Section review for Sec.
173.30, PHMSA proposes to amend the HMR to incorporate a reference to
CGA pamphlet G-1.6, Standard for Mobile Acetylene Trailer Systems,
Seventh Edition (G-1.6, 2011). Interested parties may purchase a copy
of this standard from the CGA starting at $37.00.
Section 171.22
In a May 3, 2007 final rule (Docket No. PHMSA-2005-23141 (HM-215F);
72 FR 25162), the importer responsibility requirements were
transitioned from Sec. 171.12(a) to Sec. 171.22. When transitioning
the requirement that a person importing a hazardous material into the
United States must provide the shipper and forwarding agent with
information required under the HMR, the shipper notification was
inadvertently omitted. As a result, only the forwarding agent is
presently required to be provided with information as to the
requirements of the HMR applicable to the particular shipment. In this
NPRM, PHMSA is proposing to reinstate text in Sec. 171.22(f) that was
inadvertently removed during the transition by requiring both the
foreign shipper and forwarding agent at the place of entry to be
provided with the requirements of the HMR applicable to the particular
shipment.
Part 172
Section 172.101
This section contains the HMT and explanatory text for each of the
columns in the table. In this NPRM, PHMSA is proposing a number of
revisions to the Sec. 172.101 HMT, including the special provisions
listed in Column (7) of the table and specified in Sec. 172.102, to
clarify the regulations and correct inadvertent errors. Proposed
changes to the Sec. 172.101 HMT will appear as an ``add,'' ``remove,''
or ``revise,'' and include changes to the following table entries:
``Calcium nitrate, UN1454,'' ``Corrosive liquids, flammable, n.o.s.,
UN2920,'' ``Fire extinguishers, UN1044,'' ``Oxidizing solid, corrosive,
n.o.s., UN3085,'' ``Propellant solid, UN0501,'' ``Trinitrophenol
(picric acid), wetted, with not less than 10 percent water by mass,
UN3364,'' and ``Trinitrophenol, wetted with not less than 30 percent
water, by mass, UN1344.''
The entry for ``Calcium nitrate, UN1454'' is being revised to
reflect a change that was intended to be made when PHMSA published a
final rule on January 7, 2013 (Docket No. PHMSA-2012-0027 (HM-215L); 78
FR 987). Special Provision B120 was inadvertently not assigned to the
entry for ``Calcium nitrate, UN1454'' when several HMT other entries
were revised to include Special Provision B120. Special Provision B120
indicates that the material, when offered in conformance with the
applicable requirements of Part 178 and general packaging requirements
in Part 173, may be offered for transportation in a flexible bulk
container. PHMSA is proposing to revise the HMT to add Special
Provision B120 to Column (7) for the entry ``Calcium nitrate, UN1454.''
The entry for ``Corrosive liquids, flammable, n.o.s., UN2920'' is
being revised to harmonize the HMR with the UN Model Regulations, IMDG
Code, and the ICAO TI. The UN Model Regulations, IMDG Code, and ICAO TI
provide limited quantity exceptions for the PG II entry. Therefore,
PHMSA is proposing to revise the entry for ``Corrosive liquids,
flammable, n.o.s., UN2920, PG II'' to remove the word ``None'' from
Column (8A) of the HMT and add ``154.'' This change will be consistent
with similar PG II materials that are also provided the limited
quantity exception.
The entry for ``Fire extinguishers, UN1044'' is being revised to
eliminate reference to a Special Provision 18 which is no longer in the
HMR. Special Provision 18 was removed from
[[Page 3795]]
Sec. 172.102(c)(1) in a January 7, 2013 final rule (Docket No. PHMSA-
2009-0126 (HM-215K); 78 FR 1101) and combined into revised Sec.
173.309(a). We did not make a conforming amendment to remove Special
Provision 18 from this entry in the HMT, thus, in this NPRM, we are
proposing to revise the entry for ``Fire extinguishers, UN1044'' by
deleting the special provision.
The entry for ``Oxidizing solid, corrosive, n.o.s., UN3085'' is
being revised to harmonize with the UN Model Regulations, IMDG Code,
and the ICAO TI. The UN Model Regulations, IMDG Code, and ICAO TI
provide limited quantity exceptions for the PG II entry. Therefore,
PHMSA is proposing to revise the entry for ``Oxidizing solid,
corrosive, n.o.s., UN3085, PG II'' to remove the word ``None'' from
Column (8A) of the HMT and add ``152.''
The entry for ``Propellant, solid, UN0501' is being revised to
eliminate a reference to a requirement that is no longer is in the HMR.
Column (10B) of this entry lists vessel stowage provision 24E. Vessel
stowage provision 24E was removed from Sec. 176.84(c)(2) when the
Research and Special Programs Administration (RSPA), PHMSA's
predecessor, published a final rule on June 21, 2001 (Docket No. RSPA-
2000-7702 (HM-215D); 66 FR 33316, effective October 1, 2001) that
revised the table of provisions applicable to vessel transportation of
Class 1 (explosive) materials. As this provision is no longer in the
HMR, PHMSA is proposing to revise the entry for ``Propellant, solid,
UN0501'' to remove vessel stowage provision 24E from Column (10B) of
the HMT.
The HMT entries for ``Trinitrophenol (picric acid), wetted, with
not less than 10 percent water by mass, UN3364'' and ``Trinitrophenol,
wetted with not less than 30 percent water, by mass, UN1344,'' are
being revised to harmonize the HMR with the UN Model Regulations, IMDG
Code, and the ICAO TI. Presently, Special Provision 162 is applied to
UN3364 (not less than 10 percent water) and Special Provision 23 is
applied to UN1344 (not less than 30 percent water). Special Provision
162 outlines a provision for transport of the material as a Division
4.1. The material must be packed such that at no time during transport
will the percentage of diluent fall below the percentage that is stated
in the shipping description. Special Provision 23 is similar in that it
also outlines this provision but includes an additional condition that
quantities of not more than 500 grams per package with not less than 10
percent water by mass may also be classed in Division 4.1, provided a
negative test result is obtained when tested in accordance with test
series 6(c) of the UN Manual of Tests and Criteria.
The special provisions are assigned in the reverse manner to the
trinitrophenol entries in the UN Model Regulations, IMDG Code, and the
ICAO TI. Special Provision 23 is applied to UN3364 with the lower
minimum diluent percent of water while the 500 gram limit per package
for 10% diluent does not apply to UN1344 with the larger minimum
diluent percentage of water (i.e., 30%). Thus the special provision was
inadvertently incorrectly assigned in the HMR. For the entry
``Trinitrophenol (picric acid), wetted, with not less than 10 percent
water by mass, UN3364,'' we propose to replace Special Provision 162 in
Column (7) of the HMT with Special Provision 23. Conversely, for the
entry ``Trinitrophenol, wetted, with not less than 30 percent water, by
mass, UN1344,'' we propose to replace Special Provision 23 from Column
(7) of the HMT with Special Provision 162.
Section 172.102
This section outlines special provisions that are listed in Column
(7) of the Sec. 172.101 HMT. Special Provision 136 is listed for the
entry ``Dangerous Goods in Machinery or Dangerous Goods in Apparatus,
UN3363.'' PHMSA received a request for a letter of interpretation (Ref.
No. 12-0037) which sought confirmation that a material classified as a
Class 2 gas that has packaging exceptions listed in Column (8A) of the
HMT may be described as ``Dangerous Goods in Apparatus, UN3363.'' The
requestor pointed out that the provisions in Special Provision 136 are
inconsistent. Special Provision 136 states that except when approved by
the Associate Administrator, machinery or apparatus may only contain
hazardous materials for which exceptions are referenced in Column (8)
of the HMT and are provided in Part 173, Subpart D of Subchapter C.
Subpart D of Part 173 contains the definitions, classification, packing
group assignments and exceptions for hazardous materials other than
Class 1 and Class 7. However, preparation, packaging and exceptions for
Class 2 gases are located in Subpart G of Part 173. This should be
indicated in Special Provision 136 to eliminate confusion that gases
prepared in accordance with Subpart G of Part 173 would not be eligible
to be described as ``Dangerous Goods in Apparatus, UN3363.'' It was not
PHMSA's intention to exclude Class 2 gases from using this proper
shipping name, therefore, PHMSA is proposing to revise Special
Provision 136 in Sec. 172.102 to include reference to subpart G of
part 173.
Section 172.201
This section prescribes the requirements for the preparation and
retention of shipping papers. Paragraph (d) of this section states the
requirements for shipping papers to contain an emergency response
telephone number. This paragraph states that except as provided in
Sec. 172.604(c), a shipping paper must contain an emergency response
telephone number. The reference in this paragraph to Sec. 172.604(c)
is inaccurate. The requirements in Sec. 172.604 applicable to
emergency response telephone numbers were changed when PHMSA published
a final rule on October 19, 2009 (Docket No. PHMSA-2006-26322 (HM-
206F); 74 FR 53413, effective November 18, 2009). This rulemaking
action moved the exceptions to the requirement to provide an emergency
response telephone number to a new paragraph (d). PHMSA is proposing a
conforming revision to Sec. 172.201(d) to accurately reference the
exception from the emergency response telephone number requirement
found in Sec. 172.604(d).
Sections 172.301, 172.326, 172.328, and 172.330
These sections prescribe marking requirements for non-bulk
packagings, portable tanks, cargo tanks, tank cars and multi-unit tank
car tanks. Each of these sections contains a paragraph (Sec. Sec.
172.301(f), 172.326(d), 172.328(e), and 172.330(c)) prescribing
requirements for legible marking of packages containing unodorized LPG
with NON-ODORIZED or NOT-ODORIZED. PHMSA received a request for a
letter of interpretation (Ref. No. 06-0235) requesting clarification
that the NON-ODORIZED or NOT-ODORIZED mark may also appear on a package
containing odorized LPG. In the letter, we noted that PHMSA addressed
this issue in part in a final rule published by its predecessor agency,
RSPA, on November 4, 2004 (RSPA-03-15327 (HM-206B); 69 FR 64462,
effective October 1, 2006). Final rule HM-206B changed the hazard
communication requirements applicable to certain packages containing
unodorized LPG, including the requirement to mark with NON-ODORIZED or
NOT-ODORIZED. Specifically, it also clarified that the NON-ODORIZED or
NOT-ODORIZED marking may appear on a tank car or multi-unit tank car
tanks used for both unodorized and odorized LPG. This was implemented
to address the concerns
[[Page 3796]]
expressed by a commenter to the rule about the logistics of tracking,
inspecting, and stenciling tank cars to ensure proper marking. However,
this clarification was not extended to cylinders, cargo tanks and
portable tanks containing LPG in that final rule. We further noted in
the response letter that we intended to revisit this issue in a future
rulemaking to extend this clarification to other packaging types that
are filled with unodorized or odorized LPG.
We see no compelling argument not to extend this allowance further
to other packaging types, thus, PHMSA is proposing to revise Sec. Sec.
172.301(f), 172.326(d) and 172.328(e) to include the clarification that
the marking may appear on these packagings used for both unodorized and
odorized LPG, and remove the effective date of October 1, 2006 that
appears in these paragraphs, as the effective date has long passed.
PHMSA is also removing the effective date referenced in paragraph Sec.
172.330(c).
Section 172.406
This section specifies the placement of labels on a package.
Paragraph (d) of this section prescribes requirements that labels be
printed or affixed to a background of contrasting color, or must have a
dotted or solid line outer border. Further, Sec. 172.407(b)(2)
provides that the dotted line border on each label shown in Sec. Sec.
172.411 through 172.448 is not part of the label specification, except
when used as an alternative for the solid line outer border to meet the
requirements of Sec. 172.406(d). Based on this language, it appears
that labels with a dotted or solid line outer border are permitted only
if the surface of the package is not a contrasting color.
In this rulemaking, we are proposing to amend Sec. 172.406(d) by
expressly authorizing the use of labels described in Part 172, Subpart
E with a dotted or solid line outer border on a surface background of
contrasting color. There is no reduction in hazard communication and
this revision will provide cost savings to shippers by eliminating the
need to acquire and store two types of labels (one with a border and
the other without) depending on the surface color of the package.
Section 172.407
This section contains label specifications. Paragraph (d) of this
section contains color specifications for labels including a
requirement for color tolerances according to color charts referenced
in Appendix A to Part 172 of the HMR. Paragraph (d)(4)(ii) states that
the color charts are on display at the Office of Hazardous Materials
Safety, Office of Hazardous Materials Standards, Room 8422, Nassif
Building, 400 Seventh Street SW., Washington, DC 20590-0001. This
address does not reflect the current address of the Office. PHMSA is
amending the address in Sec. 172.407(d)(4)(ii) to read Standards and
Rulemaking Division, Pipeline and Hazardous Materials Safety
Administration, U.S. Department of Transportation, East Building, 1200
New Jersey Avenue SE., Washington, DC 20590-0001.
Section 172.514
This section prescribes the placarding requirements and exceptions
for a bulk packaging containing a hazardous material. In paragraph
(c)(4), an exception is provided for an IBC that is labeled in
accordance with Part 172, Subpart E instead of placarded. IBCs that are
labeled instead of placarded are authorized to display the proper
shipping name and UN identification number in accordance with the bulk
package marking size requirements of Sec. 172.302(b)(2) in place of
the UN number on an orange panel, placard or white square-on-point.
Section 172.302(b)(2) requires that for IBCs, markings have a width of
at least 4.0 mm (0.16 inch) and a height of at least 25 mm (one inch).
This is inconsistent with the UN Model Regulations, IMDG Code, and ICAO
TI that all require a height of 12 mm (0.47 inch). The international
size requirement is equivalent to the non-bulk marking size requirement
provided in Sec. 172.301(a)(1). In addition, the reference to the bulk
packaging marking requirements of Sec. 172.302(b)(2) in Sec.
172.514(c)(4) conflicts with Sec. 172.336(d) identification number
marking requirements which states ``[w]hen a bulk packaging is labeled
instead of placarded in accordance with Sec. 172.514(c) of this
subchapter, identification number markings may be displayed on the
package in accordance with the marking requirements of Sec.
172.301(a)(1) of this subchapter.''
In this rulemaking, we are proposing to clarify that the marking
size requirement, for both the proper shipping name and identification
number, is at least 12 mm (0.47 inch) for an IBC that is labeled
instead of placarded. PHMSA proposes replacing the bulk package marking
reference in Sec. 172.514(c) with the non-bulk marking reference,
specifically, Sec. 172.301(a)(1). The reduced minimum marking size
will alleviate the existing discrepancy between Sec. 172.514(c)(4) and
Sec. 172.336(d) and decrease frustration of shipments by harmonizing
with international regulations thus ensuring IBC's marked in accordance
with these regulations are consistent with the HMR.
Part 173
Section 173.4a
This section prescribes the requirements for excepted quantities of
hazardous materials. The excepted quantities provisions were added to
the HMR when PHMSA published a final rule on January 14, 2009 (Docket
Nos. PHMSA-2007-0065 (HM-224D) and PHMSA-2008-0005 (HM-215J); 74 FR
2254, effective February 13, 2009) in an effort to harmonize with
international standards. Excepted quantities provisions in Sec. 173.4a
are intended to be consistent with the existing exception in the ICAO
TI. Paragraph (a) reads ``[e]xcepted quantities of materials other than
articles transported in accordance with this section are not subject to
any additional requirements of this subchapter except for . . .'' This
language is unclear as to whether articles (including aerosols) may use
the excepted quantities provisions. PHMSA is revising this paragraph to
clarify that articles (including aerosols) are not eligible for
excepted quantity reclassification under Sec. 173.4a, although some
aerosols are eligible to be shipped as small quantities by highway and
rail in Sec. 173.4. This will eliminate confusion as to the status of
articles (including aerosols) in the context of this exception, while
providing consistent language structure with part 3, chapter 5, section
5.1 of the ICAO TI.
Section 173.21
This section outlines forbidden materials and packages. Paragraph
(e) of this section forbids transport of a material in the same
packaging, freight container, or overpack with another material, that
if mixed would likely cause a dangerous evolution of heat, flammable or
poisonous gases or vapors, or produce corrosive materials. While this
prohibition prevents incidents from occurring within a freight
container, overpack or the same container, there is no prohibition on
this type within a transport vehicle (e.g., a truck with single
trailer). A transport vehicle is defined in Sec. 171.8 as a cargo-
carrying vehicle such as an automobile, van, tractor, truck,
semitrailer, tank car or rail car used for the transportation of cargo
by any mode. Each cargo-carrying body is a separate transport vehicle.
Allowing materials within a single cargo-carrying body (e.g., a
trailer, a rail car, etc.) that, if mixed, could cause a
[[Page 3797]]
dangerous evolution of heat, flammable or poisonous gases or vapors, or
create corrosive materials poses a significant safety risk. This method
of transportation is forbidden within a freight container, packaging,
or overpack, and while a transport vehicle is slightly different than a
packaging or overpack, it is similar to a freight container.
PHMSA received a request for a letter of interpretation (Ref. No.
13-0111) describing a potentially dangerous situation. In the letter,
the requestor described a scenario whereby a company offers for
transportation ``UN1908, Chlorite Solution, Class 8, Packing Group (PG)
II;'' ``UN1791, Hypochlorite Solutions, Class 8, PG III;'' and
``UN1789, Hydrochloric Acid Solution, Class 8, PG II'' in separate
intermediate bulk containers (IBCs) in the same transport vehicle.
While there are no formal segregation requirements per Sec. 177.848 of
the HMR, data accompanying the letter indicated that in the event of
commingling, these materials would create chlorine dioxide gas.
``Chlorine dioxide (not hydrate)'' is forbidden for transportation per
the Sec. 172.101 HMT. Thus, the transportation of these materials in
the same transport vehicle would create a situation where the mixing of
the materials would produce a poisonous gas and highly corrosive
material, which happens to also be forbidden from transport; yet, under
the current construct of Sec. 173.21, there is no prohibition against
this transport scenario.
The concern is that a single cargo-carrying body, such as a trailer
or rail car, does not provide a level of safety equivalent to if these
materials were intended to be in the same freight container, yet it is
permitted in the HMR. Additionally, the loading and unloading
requirements for Class 8 materials in Sec. 177.839 or part 174 do not
address the loading of chlorite solutions and hypochloric acid in the
same transport vehicle.
Prohibiting the transportation or offering for transportation of
materials in the same transport vehicle (e.g., a trailer, a rail car)
with another material which is likely to cause a dangerous evolution of
heat, flammable or poisonous gases or vapors, or produce corrosive
materials upon mixing would address the safety risk referenced in the
letter of interpretation Ref. No. 13-0111, for both rail and highway
transport. This change would afford these modes of transportation the
same level of safety seen in intermodal transportation and the
forbidden materials restrictions for freight containers. Therefore,
PHMSA is proposing to revise Sec. 173.21(e) to include the term
transport vehicle.
Section 173.24a
Section 173.24a prescribes additional general requirements for non-
bulk packages. Paragraph (c)(1)(iv) provides the quantity limits for
mixed contents packages (when multiple hazardous materials are packed
within the same package) transported by aircraft. In this rulemaking,
we are proposing to clarify that the requirements provided in paragraph
(c)(1)(iv) do not apply to limited quantity materials packaged in
accordance with Sec. 173.27(f)(2). This change is proposed for
clarification purposes only. Misapplication of Sec. 173.24a(c)(1)(iv)
would be duplicative and, in certain cases, would place unintended
restrictions on the net quantity of hazardous materials per package.
Section 173.27
This section prescribes general requirements for the transportation
of hazardous material by aircraft. Paragraph (f)(2) contains the
provisions for limited quantities but does not expressly address
limited quantity packages of mixed contents. PHMSA received a request
for a letter of interpretation (Ref. No. 13-0094) to clarify, for
transportation by aircraft, the applicable section to reference.
Specifically, the requester asked whether Table 3 in Sec.
173.27(f)(3), or the general provisions in Sec. 173.24a(c)(1)(iv)
should be used when determining the maximum net quantity of each inner
and outer packaging for limited quantity packages of mixed contents. In
response, we stated that as provided in Sec. 173.27(f)(2), when a
limited quantity of a hazardous material is packaged in a combination
packaging and is intended for transportation aboard an aircraft, the
inner and outer packagings must conform to the quantity limitations set
forth in Table 3. Table 3 provides the maximum net quantity of each
inner and outer packaging for materials authorized for transportation
as a limited quantity by aircraft. For mixed contents of limited
quantities by air, the shipper must comply with the maximum authorized
net quantity of each outer package (column 4 of 5 in Table 3) and
ensure that the total net quantity does not exceed the lowest permitted
maximum net quantity per package as shown by hazard class or division
for the hazardous materials in the mixed contents package.
In this rulemaking, we are proposing to revise Sec.
173.27(f)(2)(i) to clarify that the maximum net quantity for limited
quantity packages of mixed contents must conform to the quantity
limitations provided in Sec. 173.27(f)(3), Table 3.
Section 173.150
This section provides exceptions for Class 3 (flammable and
combustible liquid) hazardous materials. The requirements for
combustible liquids in bulk packagings are found in Sec. Sec.
173.150(f)(3). Although placarding under Subpart F of Part 172 is
specified as a requirement in Sec. 173.150(f)(3)(iv), registration
requirements of Sec. 107.601 are not included among the subject
requirements. Given that Sec. 173.150(f)(3) provides a list of subject
requirements for combustible liquids in bulk packaging, PHMSA is
revising this section by adding a new subparagraph Sec.
173.150(f)(3)(xi) stating that the registration requirements in Subpart
G of Part 107 are also applicable, for bulk packagings only. PHMSA is
also revising Sec. Sec. 173.150(f)(3)(ix) and 173.150(f)(3)(x) for
punctuation applicable to the listing of requirements.
Section 173.159
This section prescribes requirements applicable to the
transportation of electric storage batteries containing electrolyte
acid or alkaline corrosive battery fluid (i.e., wet batteries). This
section outlines packaging requirements, exceptions for highway or rail
transport, and tests which batteries must be capable of withstanding to
be considered as non-spillable. However, there are no requirements or
instructions for shippers of damaged or leaking wet batteries to
prepare these items for transport. PHMSA received a request for a
letter of interpretation (Ref. No. 06-0031) to clarify whether a
shipper of a damaged wet battery may utilize the exception from full
regulation provided in Sec. 173.159(e). In response, we stated that a
damaged battery may be shipped in accordance with Sec. 173.159(e)
provided: (1) It has been drained of battery fluid to eliminate the
potential for leakage during transportation; (2) it is repaired and/or
packaged in such a manner that leakage of battery fluid is not likely
to occur under conditions normally incident to transportation; or (3)
the damaged or leaking battery is transported under the provisions of
Sec. 173.3(c).
PHMSA is proposing to create a new paragraph (j) in Sec. 173.159
to address the need for provisions that allow shippers to prepare for
transport and offer into transportation damaged wet electric storage
batteries. This paragraph will permit the transportation, by highway or
rail, of damaged wet electric storage batteries under the conditions
outlined
[[Page 3798]]
in the letter of interpretation. In addition to the conditions listed
in paragraph (j), damaged wet electric storage batteries must also meet
all other applicable requirements of Sec. 173.159.
Section 173.166
This section prescribes requirements applicable to the
transportation of air bag inflators, air bag modules, and seat-belt
pretensioners. In a final rule (Docket No. PHMSA-2010-0201 (HM-254))
published on July 30, 2013 (78 FR 45880), PHMSA revised the
requirements applicable to these materials. Among the changes made was
the adoption of Special Permit DOT SP-12332 into the HMR, This special
permit excepted Class 9 air bag inflators, air bag modules, or seat-
belt pretensioners assigned to UN3268 from the requirement to provide
the EX number (i.e., the approval number) on the shipping paper.
Under Sec. 173.166, paragraph (e)(6) authorizes packaging
alternatives for air bag inflators, air bag modules, and seat-belt
pretensioners that have been removed from, or were intended to be used
in, a motor vehicle; and those devices meet the requirements for use in
the United States and are being transported to recycling or waste
disposal facilities. When adopted in HM-254, a provision in Sec.
173.166 (e)(6) stated ``for domestic transportation by highway''
thereby limiting the use of this exception to ground transport, yet DOT
SP-12332 specifically permitted transport by ``cargo vessel'' as an
authorized mode of transportation. For greater consistency with the
special permit language adopted in HM-254, PHMSA is revising paragraph
(e)(6) to add the words ``or cargo vessel.''
Sections 173.170 and 173.171
These sections prescribe exceptions for the transportation of black
powder for small arms classed as a Division 1.1 explosive and smokeless
powder for small arms classed as a Division 1.3 explosive. These
exceptions permit these materials to be reclassed as Division 4.1
flammable solid material for domestic transportation. In both sections,
the total quantity of black or smokeless powder for small arms is
limited to 45.4 kg (100 pounds) net mass in a motor vehicle (other
modes are authorized as well). PHMSA believes the exception should be
updated to account for modern highway transportation. Currently, the
HMR defines motor vehicle in Sec. 171.8 to include a vehicle, machine,
tractor, trailer, or semitrailer, or any combination thereof. The use
of the term motor vehicle in this exception limits a carrier with
multiple trailers to 100 pounds total of black or smokeless powder,
reclassed as Division 4.1. Carriers who commonly transport double or
triple trailer loads by highway may find it difficult to ensure that
each trailer contains an amount of black or smokeless powder, reclassed
as Division 4.1 that would keep the total quantity in all trailers
under 100 pounds.
PHMSA believes the term motor vehicle should be replaced with
transport vehicle in the context of this exception and we believe doing
so will not decrease the level of safety for the transport of these
materials. The term transport vehicle is defined in Sec. 171.8 as a
cargo-carrying vehicle such as an automobile, van, tractor, truck,
semitrailer, tank car or rail car used for the transportation of cargo
by any mode. Each cargo-carrying body (a trailer, a rail car, etc.) is
a separate transport vehicle. Changing the term motor vehicle to
transport vehicle would reflect a consistency in the ability to use
exceptions for black or smokeless powder with the other modes, such as
rail and vessel, whereby each rail car or freight container is
permitted to have 100 pounds total. Thus, PHMSA proposes to revise
Sec. Sec. 173.170 and 173.171 to replace the term ``motor vehicle''
with ``transport vehicle.'' Additionally, PHMSA is requesting specific
comment from stakeholders on this issue and any data they have relating
to noted incidents involving transporting black or smokeless powder for
small arms reclassed as Division 4.1 by motor vehicle.
Section 173.199
This section prescribes the packaging requirements for Category B
infectious substances. Paragraph (a)(4) of this section requires that
the packaging be capable of successfully passing the drop test in Sec.
178.609(d) and the steel rod impact test in Sec. 178.609(h) at a drop
height of at least 1.2 meters (3.9 feet).
PHMSA received a request for a letter of interpretation regarding
the test requirements in Sec. 173.199(a)(4) (Ref. No. 07-0018). The
request pointed out that in the preamble to the final rule published on
June 2, 2006 under Docket Number PHMSA-2004-16895 (HM-226A) [71 FR
32244], we state that Category B packagings must be capable of passing
a drop test, but need not be capable of passing a puncture or other
performance test. The requester asked if the regulatory text requiring
the steel rod impact test for this packaging was an error.
As we clarified in our response, PHMSA did not intend to require
the steel rod impact test in Sec. 178.609(h) for a packaging used to
transport a Category B infectious substance. Therefore, in this
rulemaking, we are proposing to revise the provisions in Sec.
173.199(a)(4) by removing the reference to the steel rod impact test in
Sec. 178.609(h).
Section 173.216
This section establishes the transportation requirements for blue,
brown, or white asbestos. Paragraph (c) of this section provides
packaging requirements for asbestos including both ``non-bulk'' and
``bulk'' packaging options.
PHMSA received a request for a letter of interpretation regarding
the applicability of bulk and non-bulk packaging instructions for
asbestos (Ref. No. 11-0169). The letter expressed confusion regarding
whether Sec. 173.216 should apply to both ``bulk'' and ``non-bulk''
packages of asbestos, because as the requester noted in the letter, in
the Sec. 172.101 HMT, the entry for ``Asbestos,'' NA2212 refers to
packaging instructions specified in Sec. 173.216 for non-bulk
packaging requirements, and Sec. 173.240 for bulk packaging
requirements. It was also noted in the letter that some of the
packaging options specified in Sec. 173.216 are considered bulk
packagings.
PHMSA acknowledged that some of the packaging options provided in
Sec. 173.216(c) meet the bulk packaging definition specified in Sec.
171.8 and, therefore, would be considered a bulk packaging for
transportation purposes. In this rulemaking, we are proposing to amend
the bulk packaging section reference in Column (8C) of the HMT from
``240'' to ``216'' for the table entries associated with the following
identification numbers: NA2212, UN2212, and UN2590. In addition, we are
proposing to revise paragraph (c)(1) in Sec. 173.216 by authorizing
the use of bulk packages prescribed in Sec. 173.240. These proposed
amendments will: (1) Eliminate the confusion pertaining to bulk
packaging specifications contained in a section referenced in the
authorized non-bulk Column (8B) of HMT; and (2) allow for the continued
use of bulk packages in Sec. 173.240, while also providing examples of
specific bulk packagings authorized for asbestos such as hopper-type
rail cars and hopper-type motor vehicles currently found in Sec.
173.216(c)(1).
Section 173.225
This section contains the packaging requirements and other
provisions applicable to the transportation of organic peroxides.
Paragraph (d) of this section contains the Packing Method table, which
provides packagings
[[Page 3799]]
authorized for organic peroxides and the maximum quantity permitted in
each package or packaging. The table is missing information and PHMSA
is proposing to revise the table to add a reference to note 1 for OP2,
which states that if two values are given, the first applies to the
maximum net mass per inner packaging and the second to the maximum net
mass of the complete package. Additionally, PHMSA is proposing to
revise the maximum quantity for solids and combination packagings
(liquid and solid) for OP4. This quantity should read as ``5/25'' kg
instead of only ``5.''
Section 173.301
This section applies to general requirements for shipment of
compressed gases and other hazardous materials in cylinders, UN
pressure receptacles and spherical pressure vessels. Paragraph (g) of
this section describes the requirements to manifold cylinders in
transportation. A manifold system is a single pipe or chamber connected
to a group of cylinders, which allows for a single point of loading and
unloading.
Incidents investigated by the NTSB have highlighted potential risks
when transporting manifolded acetylene trailers.\2\ These incidents
included overturned vehicles and two unloading releases. As a result of
the impact caused by ejection of the cylinders from the vehicle during
overturn incidents, cylinders have shown signs of broken valves, burst
heads, burst walls, as well as bulging and denting of the walls. The
impact resulting from the ejection of the cylinders from the vehicle
also can cause the valves to break, which may ignite the acetylene. The
NTSB's investigation also concluded that the unloading sequence is
occasionally done out of order from what is specified in the standard
operating procedures and this can be a contributing factor to
incidents.
---------------------------------------------------------------------------
\2\ https://www.ntsb.gov/doclib/safetystudies/SIR0901.pdf.
---------------------------------------------------------------------------
These recent incidents involving manifolded acetylene trailers have
caused the National Transportation Safety Board (NTSB) to issue two
Safety Recommendations (H-09-01 and H-09-02) to PHMSA.\3\ The NTSB
investigations resulted in the issuance of the following Safety
Recommendations:
\3\ https://phmsa.dot.gov/staticfiles/PHMSA/DownloadableFiles/Files/NTSB%20Files/H_09_1_2_Original.pdf.
---------------------------------------------------------------------------
H-09-01: Modify 49 CFR 173.301 to clearly require (1) that
cylinders be securely mounted on mobile acetylene trailers and other
trailers with manifolded cylinders to reduce the likelihood of
cylinders being ejected during an accident and (2) that the cylinder
valves, piping, and fittings be protected from multidirectional
impact forces that are likely to occur during highway accidents,
including rollovers.
H-09-02: Require fail-safe equipment that ensures that operators
of mobile acetylene trailers can perform unloading procedures only
correctly and in sequence.
Given the results of the NTSB investigations and the associated
safety risks of mobile acetylene trailer overturns and unloading
operations, PHMSA proposes to incorporate by reference in Sec. 171.7
of the HMR the CGA pamphlet G-1.6-2001, Standard for Mobile Acetylene
Trailer Systems (7th ed.). CGA G-1.6 would serve to address the NTSB
Safety Recommendations specific to mobile acetylene trailers. This
pamphlet was updated with input from PHMSA and the industry to address
cylinder securement under accident conditions, valve protection from
multidirectional impact forces and unloading fail-safe procedures
specific to mobile acetylene trailers.
Specifically, PHMSA proposes to incorporate the CGA pamphlet into
Sec. 171.7, and revise Sec. 173.301(g)(1)(iii) to indicate that
mobile acetylene trailers must be maintained, operated and transported
in accordance with CGA Pamphlet G-1.6. In addition, PHMSA seeks
specific comment on the inclusion of CGA Technical Bulletin (TB) TB-25
to address structural integrity requirements. PHMSA is also proposing
to revise Sec. 177.840, by adding paragraph (a)(3) to state that
cylinders containing acetylene and manifolded as part of a mobile
acetylene trailer system must be transported in accordance with Sec.
173.301(g) to ensure that this requirement is addressed in the carriage
by highway portion of the HMR. PHMSA seeks comment on the number of
entities affected by this proposal, if any. Finally, PHMSA seeks
comment on safety implications of such a change as well as the net
benefit such a change (i.e., decrease in the number of frustrated
shipments) would provide.
Sections 173.304a(d)(5), 173.314(h) and 173.315(b)(1)
Section 173.304a establishes additional requirements for the
shipment of LPG in specification cylinders. Section 173.314 establishes
requirements for compressed gases in tank cars and multi-unit tank cars
and Sec. 173.315 establishes requirements for compressed gases in
cargo tanks and portable tanks. PHMSA is aware of several incidents
possibly attributed to either the under-odorization or odorant fade of
LPG. Most notable of these incidents is one that happened in Norfolk,
MA on July 30, 2010 where an explosion occurred at a residential
condominium complex that was under construction. Emergency responders
from 21 cities/towns deployed personnel to the accident site. The
accident resulted in seven injuries and one fatality.
The subsequent investigation raised questions as to whether there
was a sufficient level of odorant in the LPG contained in the on-site
storage tanks. In accordance with Federal and State laws and
regulations, LPG intended for use by non-industrial entities is
generally required to be odorized, or stenched, to enable the detection
of any unintended release or leak of the gas. LPG is highly flammable
and dangerous to inhale in large quantities. The added odorant is a
safety precaution that helps warn those in the area that a release of
gas has occurred. In the Norfolk incident, there appeared to be no
warning, i.e. there was no noticeable evidence of odorant that would
indicate the on-site LPG storage tank was leaking prior to the
explosion. PHMSA has consulted with stakeholders from industry, fire
fighter associations, and other regulatory agencies in order to better
understand the root cause of incidents like the one in Norfolk.
Although additional research may be necessary in order to come to more
definitive conclusions, PHMSA has identified the following situations
in which the risks of under-odorization or odorant fade are more likely
to occur:
Injection Process: On December 13, 2012, PHMSA met with
representatives from the National Propane Gas Association (NPGA) to
gain a better understanding of the LPG odorization process. During this
meeting, representatives from the NPGA stated that the most common
method for the odorization of LPG is through an automated system.
However, the NPGA also noted there are situations where the odorization
process is manually performed. Preliminary investigations into the
Norfolk, MA incident suggest that the lack of sufficient odorization
rendered the LPG undetectable when the on-site storage tank began to
leak. In situations where the injection process is not fully automated,
the potential for human error may increase the possibility of under-
odorization. We believe that the insufficient level of odorant in the
LPG contained in the on-site storage tank involved in the Norfolk, MA
incident was likely a major contributing factor in limiting the ability
of on-site personnel to readily detect the leak.
[[Page 3800]]
New Tanks or Freshly Cleaned Tanks: During our meetings with
various stakeholders, several indicated that a phenomenon known as
``odor fade'' may be a problem when new or recently cleaned tanks are
used. New or recently cleaned tanks may absorb the odorant into the
metal shell of these tanks leading to an ``odorant fade,'' and thus
limiting the effectiveness of the remaining odorant in the LPG.
Odorization Standards: The odorization of LPG is addressed by
Federal and state laws and regulations, as well as generally accepted
industry standards and practices. When offered and transported in
commerce, the HMR specifies that all LPG in cargo and portable tanks be
effectively odorized using either 1.0 pound of ethyl mercaptan, 1.0
pound of thiopane, or 1.4 pounds of amyl mercaptan per 10,000 gallons
of LPG, in the event of an unintended release or leak to indicate the
presence of gas. The HMR do not, however, require LPG to be odorized if
odorization would be harmful in the use or further processing of the
LPG, or if odorization will serve no useful purpose as a warning agent
in such use or further processing. Essentially, this exception applies
to LPG being transported to industrial end-users.
Although the HMR requires odorization of LPG in cargo tanks and
portable tanks, there are no such parallel requirements in the HMR for
rail tank car tanks and cylinders. Therefore, in this NPRM, we are
proposing to add new Sec. Sec. 173.304a(d)(5) and 173.314(h)
consistent with the revised text in Sec. 173.315(b)(1) to address the
odorization of LPG in cylinders and rail tank car tanks, respectively.
We are also proposing to revise Sec. 173.315(b)(1) to add a
performance standard to address the issues of ``under odorization'' and
``odor fade.''
Section 173.306
This section provides exceptions from the HMR for compressed gases,
including aerosols, when transported in limited quantities. In a final
rule published May 14, 2010, under PHMSA-2009-0289 (HM-233A) [75 FR
27205], PHMSA added a new paragraph (k) to Sec. 173.306 adopting
provisions from DOT-SP 12842. These provisions authorized an increase
in gross weight per package for the purpose of packaging discarded
empty, partially used, and full aerosol containers to be transported to
a recycling or disposal facility.
PHMSA received a request for a letter of interpretation (Ref. No.
12-0004) seeking confirmation that aerosols shipped for disposal or
recycling in compliance with Sec. 173.306(k) are permitted the same
exceptions (i.e., the marking and labeling requirements of Part 172
Subparts D and E respectively, and shipping paper requirements, unless
it is a hazardous waste or hazardous substance, of 172 Subpart C)
granted under Sec. Sec. 173.306(i) and 173.156(b) without being
reclassified as an ORM-D material. The requester also pointed out that
under DOT-SP 12842, aerosols shipped for disposal or recycling were
excepted from the marking, labeling and shipping paper requirements,
unless they were considered a hazardous waste or hazardous substance,
without being reclassified as an ORM-D material.
PHMSA stated that the intention of HM-233A was to adopt DOT-SP
12842 into the HMR as was designed. Therefore, in this rulemaking, we
propose to amend Sec. 173.306(k) by clarifying that aerosols shipped
for recycling or disposal by motor vehicle, containing a limited
quantity under the specific conditions provided in Sec. 173.306(k),
are afforded the applicable exceptions provided for ORM-D materials
granted under Sec. Sec. 173.306(i) and 173.156(b). The letter provides
that, consistent with Sec. 173.306(i), packages containing aerosols
meeting the limited quantity requirements of Sec. 173.306(k) must be
marked in accordance with Sec. 172.315(b). In addition, the letter
also clarifies that the language ``INSIDE CONTAINERS COMPLY WITH
PRESCRIBED REGULATIONS'' is required for shipments of aerosols shipped
for disposal or recycling in compliance with paragraphs (a)(3), (a)(5),
or (b)(1) of Sec. 173.306.
Part 175
Section 175.1
This section describes the purpose, scope and applicability of Part
175 to air operations, specifically, the transportation of hazardous
materials in commerce by air. Exceptions for certain aircraft
operations are listed in Sec. 175.9(b). Paragraph (b)(4) of Sec.
175.9 excepts hazardous materials carried and used during dedicated air
ambulance, firefighting, or search and rescue operations. To clarify
that these operations are not subject to the HMR when in compliance
with applicable Federal Aviation Regulations (FAR; 14 CFR) and any
additional FAA requirements, PHMSA proposes to create a new paragraph
(d) in Sec. 175.1 stating that the HMR does not apply to dedicated air
ambulance, firefighting, or search and rescue operations. This will
eliminate any confusion that these air operations would otherwise be
subject to requirements in the HMR (e.g., passenger notification
requirements). PHMSA also proposes to remove Sec. 175.9(b)(4) for
consistency.
As with other conditional exceptions to the HMR, non-compliance
with the FAR could subject operators to enforcement under the HMR.
PHMSA does not anticipate any adverse safety consequences with this
proposed revision due to the existing training requirements in the FAR
on the proper handling and stowage of hazardous materials carried
onboard aircraft.
The FAA and PHMSA recognize that certain operators do not solely
utilize their aircraft for purposes under Sec. 175.9(b)(4). Normal
transport operations (i.e., the transport of either passengers or cargo
not required for performance of, or associated with, the specialized
emergency function) would continue to be subject to the HMR. However,
staging operations and other operations related to dedicated air
ambulance, firefighting, or search and rescue operations are intended
to be excepted from the HMR when in compliance with the FAR. We note
the following definitions in FAA Order 8900.1 (Vol. 3, Chapter 14,
Section 1, 3-529(C)):
(1) Firefighting. This term includes the drop of fire
retardants, water, and smoke jumpers. It also includes the transport
of firefighters and equipment to a fire or to a base camp from which
they would be dispersed to conduct the firefighting activities.
(2) Search and Rescue. Search and rescue is a term of art
meaning aircraft operations that are flown to locate people who
cannot be located from the ground. The term includes operations
where the aircraft is indispensable to the search, or is the only
feasible means of reaching the victim. Victims would be considered
to be ``associated with'' the search and rescue operation. The term
``search and rescue'' does not include routine medical evacuation of
persons due to traffic accidents and other similar incidents.
Air ambulance operators are required by the FAR to utilize either
Operational Specification (OpSpec) A021 ((Helicopter Emergency Medical
Services (HEMS) Operations) or A024 (Air Ambulance Operations-Airplane)
and must obtain and adhere to the appropriate OpSpec to be excepted
from the HMR.
Section 175.8
This section provides exceptions from certain regulations for air
carrier operator equipment and items of replacement. Paragraph (b)(1)
provides that oxygen, or any hazardous material used for the generation
of oxygen, for
[[Page 3801]]
medical use by a passenger, which is furnished by the aircraft operator
in accordance with certain 14 CFR requirements is not subject to the
requirements of the HMR. The provisions of 14 CFR, Sec. 125.219,
Oxygen for medical use by passengers, was inadvertently left out of
paragraph (b)(1). In this rulemaking, we are proposing to correct the
paragraph by adding the appropriate 14 CFR, Part 125 citation.
Section 175.10
This section provides exceptions for passengers, crewmembers, and
air operators. Paragraph (a) of this section lists a number of
hazardous materials that are permitted for carriage by passengers or
crewmembers provided the requirements of Sec. Sec. 171.15 and 171.16
and the conditions of this section are met. PHMSA is proposing
revisions to some of these provisions to promote clarity.
In paragraph (a)(6), hair curlers (curling irons) containing a
hydrocarbon gas such as butane and carried in carry-on or checked
baggage, are excepted from the requirements of the HMR. Gas refills for
such curlers are not permitted in carry-on or checked baggage. In this
NPRM, PHMSA proposes to prohibit such hair curlers in checked baggage.
We believe the risk posed by flammable gases in an inaccessible
compartment on a passenger-carrying aircraft is obvious. Flammable
gases will burn if mixed with an appropriate amount of air and confined
burning of a flammable gas can lead to detonation. As a result, we
remain concerned with the flammability hazard posed by butane and other
flammable gases and the ability of such gases to propagate or
contribute to a fire in the cargo compartment of an aircraft. This
concern is particularly relevant to carriage in checked baggage where
damage to the curling iron and the subsequent release of a flammable
gas may occur if the baggage is mishandled or the article itself is
compromised.
Because of the risks posed by flammable gas, a number of safety
requirements apply to cargo shipments of flammable gas on passenger-
carrying aircraft. Most Division 2.1 flammable gas substances and
articles are generally forbidden from transportation as cargo aboard
passenger-carrying aircraft and prohibiting the carriage of butane-
powered curling irons in checked baggage is consistent with this
provision. In the area of aviation safety, where the high volume of
travel and the catastrophic consequences of failure lead to a very low
tolerance for risk, we firmly believe the known risks of flammable gas
are sufficient basis for our decision. We solicit public comment on any
impact our proposed action may impose upon passengers, crew members,
and air operators.
In paragraph (a)(22) of this section, non-infectious specimens
transported in accordance with Sec. 173.4b(b) (de minimus quantities)
are permitted for carriage by passengers or crewmembers. PHMSA is
clarifying this exception to include the phrase ``in preservative
solutions'' to clarify the intended use of this exception. Non-
infectious substances would not otherwise be subject to the HMR if they
did not otherwise meet the definition of any other hazard classes. This
clarification will signal that the exception refers to specimens in
solutions that may contain preservatives that are hazardous materials
such as formaldehyde and alcohol solutions.
Additionally PHMSA is revising paragraph (a)(24) of this section,
which refers to small cartridges of carbon dioxide or other suitable
gas of Division 2.2. The exception states that small cartridges fitted
into devices with no more than four small cylinders are permitted. This
is inconsistent with the ICAO TI, which permits cartridges for other
devices indicating that spares are permitted. As Sec. 175.10(a)(24)
currently reads, there is no mention of spare cartridges. The HMR
currently permits up to four small cartridges and therefore, PHMSA is
proposing to revise this paragraph to state that small cartridges
fitted into or securely packed with devices with no more than four
small cylinders of carbon dioxide or other suitable gas in Division 2.2
are permitted for carriage by passengers or crewmembers. This change
will harmonize with international standards to clarify that spares are
permitted in addition to the cartridges already fitted into the device,
provided they are securely packed with the devices for intended use.
Section 175.75
This section describes the quantity limitations and cargo locations
for carriage by aircraft. Paragraph (e)(2) excepts packages of
hazardous materials transported aboard a cargo aircraft, when other
means of transportation are impracticable or not available, in
accordance with procedures approved in writing by the FAA Regional or
Field Security Office in the region where the operator is located from
the requirements of paragraphs (c) and (d) of Sec. 175.75. PHMSA is
revising this paragraph by removing the word ``located'' and adding the
word ``certificated'' in its place. The words ``or Field Security'' are
also removed. This amendment will ensure operators interact with the
Hazardous Materials Division Manager (HMDM) who has already reviewed
and recommended for approval the certificate's HazMat-related manual(s)
required under 14 CFR 14 CFR 121.135. The HMDM (or designee) will
already have an understanding of the certificate's operations and, as
needed, will interact with the local resources and/or the operator's
certificate management team to assess the impracticability or lack of
availability of other cargo operations--as well as what alternative
procedures should be prescribed.
Part 176
Section 176.30
This section prescribes the information required on dangerous cargo
manifests for vessel transport. Paragraph (a)(4) requires ``the number
and description of packages (barrels, drums, cylinders, boxes, etc.)
and gross weight for each type of packaging.'' In this rulemaking, we
are proposing to replace the word ``packaging'' with ``package'' as the
term ``packaging'' refers to the means of containment and not the
completed package.
Part 177
Section 177.848
This section addresses segregation requirements for hazardous
materials transported by motor carrier. PHMSA received a request for a
letter of interpretation (Ref. No. 09-0268) requesting clarification
whether ``UN0042, Boosters, 1.1D, PG II'' and ``UN1942, Ammonium
nitrate, 5.1, PG III'' can be transported in the same vehicle. The
requester noted seemingly conflicting requirements in Sec. Sec.
177.835 and 177.848 applicable to the segregation of ammonium nitrate
fertilizer and explosive materials.
Section 177.848(e) provides instructions for using the segregation
table in Sec. 177.848(d). Presently, under Sec. 177.848(e)(5)
assignment of note ``A'' authorizes ammonium nitrate (UN1942) and
ammonium nitrate fertilizer to be loaded or stored with Division 1.1
(explosive) or Division 1.5 materials. However, Sec. 177.835(c)
provides that Division 1.1 or 1.2 (explosive) materials may not be
loaded into or carried on any vehicle or a combination of vehicles
under certain conditions outlined in paragraphs (c)(1) through (c)(4).
PHMSA clarified in the letter that a Division 1.1 or 1.2 explosive may
not be loaded into or carried on any vehicle or a combination of
vehicles that does not conform to Sec. Sec. 177.835(c)(1) through (4),
regardless of the note ``A'' exception for
[[Page 3802]]
UN1942 in Sec. 177.848(e)(5). In this rulemaking, we are proposing to
clarify that the loading restrictions in Sec. 177.835(c)(1) through
(4) are applicable to Sec. 177.848(e).
Part 178
Section 178.65
This section applies to the manufacture of DOT Specification 39
non-reusable (non-refillable) cylinders. Paragraph (i) of this section
describes the required markings for DOT 39 cylinders. The reference to
Sec. 178.35(h) in Sec. 178.65(i)(1) is incorrect, as Sec. 178.35(h)
was removed under a final rule published July 20, 2011 (Docket No.
PHMSA-2009-0151 (HM-218F). The final rule consolidated the inspector's
report requirements found in Sec. 178.35(g) into paragraph (c)(4) of
that section, moved the manufacturer's report retention requirements
into paragraph (g) and removed paragraph (h). PHMSA is proposing to
revise Sec. 178.65(i)(1) to correctly reference the manufacturer's
report requirements in Sec. 178.35(g).
Section 178.337-17
This section prescribes the marking requirements applicable to MC
331 cargo tank motor vehicles. Paragraph (a) of this section outlines
general requirements for marking of MC 331 cargo tank motor vehicles.
PHMSA received a request for a letter of interpretation to clarify the
applicability of these markings in Sec. 178.337-17(a) (Ref. No. 04-
0206). The request pointed out an incorrect use of the term cargo tank
as it applies to the requirement for specification plates found in
paragraph (a), which states that:
``Each cargo tank certified after October 1, 2004 must have a
corrosion-resistant metal name plate (ASME Plate) and specification
plate permanently attached to the cargo tank by brazing, welding or
other suitable means on the left side near the front, in a place
accessible for inspection.''
In response, we stated that an MC 331 cargo tank must have a metal
name plate (also referred to as an ASME plate) permanently attached to
the cargo tank. In addition, an MC 331 cargo tank motor vehicle
certified after October 1, 2004, must have a specification plate that
includes the information specified in Sec. 178.337-17(c). PHMSA is
proposing to clarify Sec. 178.337-17(a) to eliminate confusion of the
name plate and specification plate requirements.
Section 178.345-3
This section prescribes general requirements for the structural
integrity of specification cargo tanks. Paragraph (c)(1) of this
section addresses stress in the cargo tank shell resulting from normal
operating loadings. PHMSA published a final rule on October 2, 2013
(Docket No. PHMSA-2013-0158 (HM-244F); 78 FR 60745; effective October
1, 2013) intending to correct the formula presented in paragraph (c)(1)
for the figure ``SS2'' to read ``SS\2\.'' This correction
correctly adjusted the standard ``2'' in the term to be a superscript
``\2\,'' but inadvertently adjusted the second ``S'' from a subscript
``S'' to a standard ``S.'' This is incorrect and PHMSA is
proposing to revise this portion of the formula in Sec. 178.345-
3(c)(1) to read ``SS\2\.''
Section 178.955
This section prescribes the design and testing criteria for Large
Packagings. Presently, if a manufacturer of a Large Packaging wishes to
construct a Large Packaging that differs from a listed specification
there is no Associate Administrator approval provision outlined in the
HMR. However, the HMR allude to the need for an approval in the Large
Packaging marking requirements in Sec. 178.910(a)(1)(ii). The HMR has
approval provisions in Part 178 for manufacturers of both non-bulk
packagings and IBCs when constructing packagings that differ from
listed specifications. In this rulemaking, we are proposing to include
provisions consistent with the non-bulk packaging and IBC approval
provisions for Large Packagings in Sec. 178.955. Such Large Packagings
must be shown to be equally effective, and testing methods used must be
equivalent. This change will resolve the issue with Sec.
178.910(a)(1)(ii) and would be consistent with the UN Model Regulations
and the IMDG Code, which provide approval provisions for non-bulk
packagings, IBCs, and Large Packagings.
Part 179
Section 179.13
This section includes limitations on rail tank car capacity and
gross weight. With certain exceptions, this section generally limits
the gross weight on rail of tank cars to 263,000 pounds. This section
has been revised numerous times over the last several years. In 2009,
PHMSA added paragraph (b) to this section authorizing tank cars
designed to transport poisonous-by-inhalation (PIH) materials and built
with certain mandated safety improvements (tank cars meeting the
specifications of Sec. 173.244(a)(2) or (3) or Sec. 173.314(c) or
(d)) to have a gross weight on rail of up to 286,000 pounds provided
any weight increase was not used to increase product capacity. 74 FR
1770 (Jan. 13, 2009). Subsequently, in an effort to incorporate several
widely used special permits providing relief from the gross weight
limitations of Sec. 179.13, PHMSA revised the section to provide FRA
the authority to approve the operation of tank cars containing
materials other than PIH materials at gross weights of up to 286,000
pounds. 75 FR 27205 (May 14, 2010). FRA published notice of its
approvals under this section on January 25, 2011. 76 FR 4250.
In 2011, noting that the agency's stated intent in the 2010 rule
was to incorporate into the HMR existing special permits related to
tank car gross weight for tank cars carrying both non-PIH materials and
PIH materials by giving FRA authority to approve tank car weights up to
286,000 pounds for both types of tank cars, PHMSA proposed to revise
Sec. 179.13 to correct the omission of PIH material tank cars from
FRA's approval authority. See 76 FR 51324, 51331. However, when adopted
as a final rule, the regulatory language did not correct this
inadvertent omission. See 77 FR 37962, 37985 (HM-218B) (June 25, 2012).
Instead, in the final HM-218B rule, Sec. 179.13 was revised to provide
that tank cars designed to transport PIH materials and built with the
mandated safety improvements set forth in Sec. 173.244(a)(2) or (3) or
Sec. 173.314(c) or (d)) ``may have a gross weight on rail of up to
286,000 pounds upon approval by the Associate Administrator for
Railroad Safety, FRA.'' As clearly demonstrated by the 2009 and 2010
rules, it was not the intent of either PHMSA or FRA to require FRA
approval of tank cars built to the enhanced standards of Sec.
173.244(a)(2) or (3) or Sec. 173.314(c) or (d) for those cars to
operate at a gross rail load of 286,000 pounds. Accordingly, in this
rule PHMSA is proposing to revise Sec. 179.13 to correct this error
and (1) make it clear that tank cars built to the enhanced standards of
Sec. 173.244(a)(2) or (3) or Sec. 173.314(c) or (d) do not need FRA
approval to operate at gross rail loads of up to 286,000 pounds; and
(2) to provide for FRA approval of tank cars containing PIH materials
that do not meet the enhanced standards to operate at gross rail loads
of up to 286,000 pounds.
Part 180
Section 180.209
This section prescribes requalification requirements for DOT
specification cylinders. Paragraph (j) contains a reference to an
obsolete special provision. In a January 7, 2013 final rule (78 FR
1101), we removed and relocated
[[Page 3803]]
regulatory text from Sec. 172.102(c)(1) Special Provision 18 to Sec.
173.309(a), which prescribes the conditions when specification
cylinders may be described, offered, and transported in commerce as
fire extinguishers. In relocating the text, we did not update this
section to reflect the change. In this rulemaking, we are proposing to
correct this inconsistency by replacing the reference to Sec.
172.102(c)(1) Special Provision 18 with Sec. 173.309(a).
Section 180.401
This section provides the applicability of the requirements of
Subpart E of Part 180. It states that Subpart E prescribes
requirements, in addition to those contained in Parts 107, 171, 172,
173 and 178 of this subchapter, applicable to any person responsible
for the continuing qualification, maintenance or periodic testing of a
cargo tank.
The term ``person,'' as defined in Sec. 171.8, means an
individual, corporation, company, association, firm, partnership,
society, joint stock company; or a government, Indian tribe, or
authority of a government or tribe offering a hazardous material for
transportation in commerce or transporting a hazardous material to
support a commercial enterprise. This term does not include the United
States Postal Service or, for purposes of 49 U.S.C. 5123 and 5124, a
Department, agency, or instrumentality of the government.
The intent of Sec. 180.401 is to require a person involved with
continuing qualification, maintenance or periodic testing of a cargo
tank to comply with the requirements of Subpart E, even if they are not
offering a hazardous material for transportation in commerce or
transporting a hazardous material to support a commercial enterprise.
In this rulemaking, we are proposing to revise the term ``person'' to
``hazardous materials employee or hazardous materials employer.'' This
will clarify that Subpart E of Part 180 not only applies to persons
offering hazardous materials for transportation or transporting a
hazardous material, but also those involved with qualification,
maintenance or periodic testing.
V. Regulatory Analyses and Notices
A. Statutory/Legal Authority for This Rulemaking
This NPRM is published under authority of Federal hazardous
materials transportation law (Federal hazmat law; 49 U.S.C. 5101 et
seq.). Section 5103(b) of Federal hazardous materials law authorizes
the Secretary of Transportation to prescribe regulations for the safe
transportation, including security, of hazardous materials in
intrastate, interstate, and foreign commerce. If adopted as proposed,
this NPRM would make miscellaneous amendments to the HMR, correct
errors in the Sec. 172.101 HMT and corresponding special provisions,
and respond to NTSB Safety Recommendations related to the safe
transportation of manifolded acetylene cylinders.
Additionally, this NPRM will respond to petitions for rulemaking
related to the allowable format for emergency telephone numbers on
shipping papers, relax the pressure test interval for certain cargo
tanks in dedicated propane service, enhance the safe packaging for
nitric acid, clarify the testing requirements for specification cargo
tank pressure relief devices, harmonize the hazard communication
requirements for poisonous by inhalation materials transported by
vessel and eliminate a potentially confusing packing group designation
for certain organic peroxides, self-reactive materials and explosives.
These amendments clarify regulatory requirements and, where
appropriate, decrease the regulatory burden without compromising the
safe transportation of hazardous materials in commerce.
B. Executive Order 12866, Executive Order 13563 and DOT Regulatory
Policies and Procedures
This proposed rule is not considered a significant regulatory
action under section 3(f) and was not reviewed by the Office of
Management and Budget (OMB). The proposed rule is not considered a
significant rule under the Regulatory Policies and Procedures order
issued by the Department of Transportation [44 FR 11034].
In this notice of proposed rulemaking, we propose to amend
miscellaneous provisions in the HMR to clarify the provisions and to
relax overly burdensome requirements. PHMSA anticipates the proposals
contained in this rule will have economic benefits to the regulated
community. This NPRM is designed to increase the clarity of the HMR,
thereby increasing voluntary compliance while reducing compliance
costs.
Executive Order 13563 is supplemental to and reaffirms the
principles, structures, and definitions governing regulatory review
that were established in Executive Order 12866 Regulatory Planning and
Review of September 30, 1993. In addition, Executive Order 13563
specifically requires agencies to: (1) Involve the public in the
regulatory process; (2) promote simplification and harmonization
through interagency coordination; (3) identify and consider regulatory
approaches that reduce burden and maintain flexibility; (4) ensure the
objectivity of any scientific or technological information used to
support regulatory action; and (5) consider how to best promote
retrospective analysis to modify, streamline, expand, or repeal
existing rules that are outmoded, ineffective, insufficient, or
excessively burdensome.
In this NPRM, PHMSA has involved the public in the regulatory
process in a variety of ways. Specifically, PHMSA is addressing issues
and errors that were identified for future rulemaking in letters of
interpretation and through other correspondence with PHMSA stakeholders
who bring editorial errors in the HMR to our attention. In addition,
PHMSA has responded to seven petitions for rulemaking and two NTSB
Safety Recommendations. PHMSA is asking for public comments based on
the proposals in this NPRM. Upon receipt of public comment, PHMSA will
address all substantive comments in the next rulemaking action under
this docket number.
The proposed amendments in the NPRM promote simplification and
harmonization through interagency coordination. In this NPRM, PHMSA is
proposing to revise 49 CFR part 175, in a collaborative effort with the
Federal Aviation Administration (FAA), to clarify the applicability of
the HMR to certain aircraft operators, clarify exceptions for
passengers and crewmembers, correct inaccurate references to the 14
CFR, as well as make minor editorial corrections applicable to air
operations to improve overall clarity. There are minimal additional
costs associated with these proposals, however increased clarity will
result in net benefits. Additionally, by updating references to the AAR
Tank Car Manual in Sec. 171.7, PHMSA worked collaboratively with FRA,
promoting interagency coordination.
This NPRM also promotes harmonization with international standards,
such as the IMDG Code, Canada's TDG requirements and the ICAO TI. These
efforts include:
Harmonizing hazard communication for poisonous-by-
inhalation materials with the IMDG Code and TDG regulations;
Removing the packing group II designation for certain
organic peroxides, self-reactive substances and explosives to be
consistent with the UN Recommendations, IMDG Code and
[[Page 3804]]
ICAO TI and thus, facilitate international transport;
Harmonizing entries in the HMT with the above listed
international standards;
Revising the passenger exceptions applicable to small
cartridges containing Division 2.2 gas with the ICAO TI; and
Harmonizing the excepted quantities requirements to mirror
language employed in the ICAO TI as they apply to articles.
These revisions to the Sec. 172.101 HMT will eliminate errors in
the Sec. 172.101 HMT, reduce ambiguity, harmonize the HMR with
international regulations, and improve clarity. Although these
revisions are minor, they are expected to produce a safety benefit
derived from the increased clarity and accuracy of the text in the
Sec. 172.101 HMT.
This NPRM permits flexibility in achieving compliance when
transporting damaged wet electric storage batteries. This NPRM also
extends the requalification interval for certain MC 331 cargo tanks in
dedicated propane service from five years to ten years for a pressure
test and internal visual inspection, therefore, fostering greater
regulatory flexibility without compromising transportation safety.
PHMSA is also clarifying the regulations to provide flexibility in the
ability to use the NOT-ODORIZED or NON-ODORIZED marking on cargo tanks,
cylinders and portable tanks containing odorized or unodorized LPG.
Additionally, by allowing 100 pounds of black or smokeless powder for
small arms reclassed as Division 4.1 in each transport vehicle, instead
of each motor vehicle, the regulated community can reduce the number of
motor vehicles needed to transport these goods.
Where PHMSA identified potential costs to stakeholders, specific
comment was requested to clarify such costs. We request specific
comment on potential cost impacts of the proposals in Sec. 172.604 and
Sec. 173.158(e).
A majority of the amendments in this rulemaking are simple
clarifications and do not require significant scientific or
technological information. However, when necessary in this NPRM, PHMSA
used scientific or technological information to support its regulatory
action. Specifically, such data was considered when structuring
alternatives on how to best deal with issues regarding the testing of
pressure relief devices for cargo tank motor vehicles and extending the
pressure test and internal visual inspection test interval from five to
ten years for certain MC 331 cargo tanks in dedicated propane delivery
service. This information was used in the evaluation of alternative
proposals and ultimately this information determined how best to
promote retrospective analysis to modify and streamline existing
requirements that are outmoded, ineffective, insufficient, or
excessively burdensome.
C. Executive Order 13132
This proposed rule was analyzed in accordance with the principles
and criteria contained in Executive Order 13132 (``Federalism''). This
proposed rule would preempt state, local and Indian tribe requirements
but does not propose any regulation that has substantial direct effects
on the states, the relationship between the national government and the
states, or the distribution of power and responsibilities among the
various levels of government. Therefore, the consultation and funding
requirements of Executive Order 13132 do not apply.
The Federal hazardous material transportation law, 49 U.S.C.
5125(b)(1), contains an express preemption provision (49 U.S.C.
5125(b)) preempting state, local, and Indian tribe requirements on
certain covered subjects. Covered subjects are:
(i) The designation, description, and classification of hazardous
materials;
(ii) The packing, repacking, handling, labeling, marking, and
placarding of hazardous materials;
(iii) The preparation, execution, and use of shipping documents
related to hazardous materials and requirements related to the number,
content, and placement of those documents;
(iv) The written notification, recording, and reporting of the
unintentional release in transportation of hazardous materials; or
(v) The design, manufacture, fabrication, marking, maintenance,
reconditioning, repair, or testing of a packaging or container which is
represented, marked, certified, or sold as qualified for use in the
transport of hazardous materials.
This proposed rule concerns the classification, packaging, and
handling of hazardous materials, among other covered subjects. If
adopted, this rule would preempt any state, local, or Indian tribe
requirements concerning these subjects unless the non-Federal
requirements are ``substantively the same'' (see 49 CFR 107.202(d) as
the Federal requirements.)
Federal hazardous materials transportation law provides at 49
U.S.C. 5125(b)(2) that if PHMSA issues a regulation concerning any of
the covered subjects, PHMSA must determine and publish in the Federal
Register the effective date of Federal preemption. That effective date
may not be earlier than the 90th day following the date of issuance of
the final rule and not later than two years after the date of issuance.
PHMSA proposes the effective date of federal preemption be 90 days from
publication of a final rule in this matter in the Federal Register.
D. Executive Order 13175
This proposed rule has been analyzed in accordance with the
principles and criteria contained in Executive Order 13175
(``Consultation and Coordination with Indian Tribal Governments'').
Because this proposed rule does not have tribal implications and does
not impose substantial direct compliance costs on Indian tribal
governments, the funding and consultation requirements of Executive
Order 13175 do not apply, and a tribal summary impact statement is not
required.
E. Regulatory Flexibility Act, Executive Order 13272, and DOT
Procedures and Policies
The Regulatory Flexibility Act (5 U.S.C. 601 et seq.) requires an
agency to review regulations to assess their impact on small entities
unless the agency determines the rule is not expected to have a
significant impact on a substantial number of small entities. This
proposed rule would clarify provisions based on PHMSA's initiatives and
correspondence with the regulated community. The proposed changes are
generally intended to provide relief to shippers, carriers, and
packaging manufacturers, including small entities, by easing overly
burdensome requirements with no reduction in safety.
Consideration of alternative proposals for small businesses. The
Regulatory Flexibility Act directs agencies to establish exceptions and
differing compliance standards for small businesses, where it is
possible to do so and still meet the objectives of applicable
regulatory statutes. In the case of hazardous materials transportation,
it is not possible to establish exceptions or differing standards and
still accomplish our safety objectives.
The impact of this proposed rule is not expected to be significant.
The proposed changes are generally intended to provide relief to
shippers, carriers, and packaging manufactures and testers, including
small entities. This relief will provide marginal positive economic
benefits to shippers, carriers, and packaging manufactures and testers,
including small entities. These benefits are not at a level that can be
considered economically significant;
[[Page 3805]]
therefore, this proposed rule will not have a significant economic
impact on a substantial number of small entities.
This proposed rule has been developed in accordance with Executive
Order 13272 (``Proper Consideration of Small Entities in Agency
Rulemaking'') and DOT's procedures and policies to promote compliance
with the Regulatory Flexibility Act to ensure that potential impacts of
draft rules on small entities are properly considered.
F. Paperwork Reduction Act
PHMSA currently has an approved information collection under Office
of Management and Budget (OMB) Control Number 2137-0557, entitled
``Approvals for Hazardous Materials.'' This proposed rule does not
propose any changes that would affect the burden for this or any other
information collection.
Prior to the publication of a final rule entitled ``Hazardous
Materials: Revisions to Fireworks Regulation'' under Docket No. PHMSA-
2010-0320 (HM-257) published in the Federal Register on July, 6 2013
[78 FR 42457], the HMR contained a requirement that all certification
agencies provide a statement that it would perform its functions
independent of the owners and manufacturers of the packagings in its
field. The burden for this requirement was accounted for under OMB
Control Number 2137-0557. However, the HM-257 final rule inadvertently
removed this language from the HMR. Therefore, in this NPRM, PHMSA is
proposing to reinsert the language for certification agencies to
confirm that they are independent and not owned by a company in its
field. For ease of the reader, this language is being proposed to be
inserted as follows:
PHMSA is proposing to revise Sec. 107.402(f) to require
that a portable tank and MEGC certification agency submit a statement
indicating that the agency is independent of and not owned by a
portable tank or MEGC manufacturer, owner, or distributor as part of
the Portable tank and MECG Certification Agency application.
PHMSA is proposing to revise Sec. 107.402(e) to require
that a lighter certification agency submit a statement that the agency
is independent of and not owned by a lighter manufacturer, distributor,
import or export company, or proprietorship as part of the Lighter
Certification Agency application.
PHMSA is proposing to revise Sec. 107.807 to require that
person who seeks to manufacture DOT specification cylinders and special
permit cylinders, or perform chemical analysis and tests of those
cylinders outside the United States submits a statement, as part of the
application, indicating that the inspection agency is independent of
and not owned by a cylinder manufacturer, owner, or distributor.
G. Regulation Identifier Number (RIN)
A regulation identifier number (RIN) is assigned to each regulatory
action listed in the Unified Agenda of Federal Regulations. The
Regulatory Information Service Center publishes the Unified Agenda in
April and October of each year. The RIN number contained in the heading
of this document can be used to cross-reference this action with the
Unified Agenda.
H. Unfunded Mandates Reform Act
This proposed rule does not impose unfunded mandates under the
Unfunded Mandates Reform Act of 1995. It does not result in costs of
$141,300,000 or more to either state, local, or tribal governments, in
the aggregate, or to the private sector, and is the least burdensome
alternative that achieves the objective of the rule.
I. Environmental Assessment
The National Environmental Policy Act of 1969, 42 U.S.C. 4321-4375,
requires that federal agencies analyze proposed actions to determine
whether the action will have a significant impact on the human
environment. The Council on Environmental Quality (CEQ) regulations
require federal agencies to conduct an environmental review considering
(1) the need for the proposed action, (2) alternatives to the proposed
action, (3) probable environmental impacts of the proposed action and
alternatives, and (4) the agencies and persons consulted during the
consideration process (40 CFR 1508.9(b)).
This NPRM would amend the Hazardous Materials Regulations (HMR; 49
CFR parts 171-180) by making miscellaneous revisions to update and
clarify certain regulatory requirements, responds to seven petitions
for rulemaking submitted to PHMSA by various stakeholders, and
addresses two NTSB recommendations. These amendments are intended to
promote safety, regulatory relief, and clarity. The proposed changes
were identified through an internal review of the HMR as well as in
response to communications with various stakeholders affected by the
HMR, through letters of interpretation and editorial issues being
brought to our attention. These proposed minor changes will clarify the
HMR and enhance safety, while offering net economic benefits.
This action is necessary to: (1) Fulfill our statutory directive to
promote transportation safety; (2) fulfill our statutory directive
under the Administrative Procedure Act (APA) that requires Federal
agencies to give interested persons the right to petition an agency to
issue, amend, or repeal a rule (5 U.S.C. 553(e)); (3) support
governmental efforts to provide regulatory relief to the regulated
community; (4) address safety concerns raised by the NTSB and remove
regulatory ambiguity identified by the regulated community; and (5)
simplify and clarify the regulations in order to promote understanding
and compliance.
The intended effect of this action is to enhance the safe
transportation of hazardous materials and, in conjunction, clarify,
simplify and relax certain regulatory requirements for carriers,
shippers, and other stakeholders. These regulatory revisions will offer
more efficient and effective ways of achieving safe and secure
transportation of hazardous materials in commerce.
Description of Action: Docket No. PHMSA-2013-0225 (HM-218H), NPRM
Transportation of hazardous materials in commerce is subject to
requirements in the HMR, issued under authority of Federal hazardous
materials transportation law, codified at 49 U.S.C. 5001 et seq. To
facilitate the safe and efficient transportation of hazardous materials
in international commerce, the HMR provide that both domestic and
international shipments of hazardous materials may be offered for
transportation and transported under provisions of the international
regulations.
In proposing this rulemaking, PHMSA is considering the following
alternatives:
Alternative 1: No Action
If PHMSA chose this alternative, it would not proceed with any
rulemaking on this subject and the current regulatory standards would
remain in effect. This option would not address outstanding petitions
for rulemaking or NTSB Safety Recommendations. We rejected the no
action alternative.
Alternative 2: Go Forward With the Proposed Amendments to the HMR in
This NPRM
This alternative is the current proposal as it appears in this
NPRM, applying to transportation of hazardous materials by various
modes (highway, rail, vessel and aircraft). The proposed amendments
encompassed in this alternative are more fully addressed in
[[Page 3806]]
the preamble and regulatory text sections. However, they generally
include the following changes to the HMR, grouped below for ease of
discussion:
Incorporation by Reference and Use of International Standards:
Remove the entry for CGA Publication C-1.1 in Table 1 to
Sec. 171.7.
Incorporate by reference in Sec. 171.7 CGA Publication G-
1.6, Standard for Mobile Acetylene Trailer Systems, Seventh Edition
(responds to petition P-1605 and two NTSB Safety Recommendations, H-09-
01 and H-09-02).
Incorporate by reference in Sec. 171.7 AAR Manual of
Standards and Recommended Practices, Section C-III, Specifications for
Tank Cars, Specification M-1002 (AAR Specifications for Tank Cars).
Amend the marking requirements for poisonous by inhalation
shipments transported in accordance with the IMDG Code or TDG
Regulations (responds to petition for rulemaking P-1591).
Sec. 172.101 Hazardous Materials Table and Sec. 172.102 Special
Provisions:
Remove the packing group II designation for certain
organic peroxides, self-reactive substances and explosives (responds to
petition for rulemaking P-1590).
Revise the Sec. 172.101 table to add Special Provision
B120 to column 7 for the entry ``Calcium nitrate, UN1454.''
Revise the entry for ``Propellant, solid, UN0501'' to
remove vessel stowage provision 24E from column 10B of the HMT.
Revise the packing group II HMT entry for UN 2920,
Corrosive liquids, flammable, n.o.s., to harmonize the HMR with the UN
Model Regulations, IMDG Code and the ICAO TI by adding a reference to
Sec. 173.154 to column 8A of the HMT.
Revise the entry for ``Oxidizing solid, corrosive, n.o.s.,
UN 3085, PG II'' to harmonize the HMR with the UN Model Regulations,
the IMDG Code and the ICAO TI by adding a reference to Sec. 173.152 to
column 8A of the HMT.
Revise the HMT entries for ``Trinitrophenol (picric acid),
wetted, with not less than 10 percent water by mass, UN 3364'' and
``Trinitrophenol, wetted with not less than 30 percent water, by mass,
UN 1344'' to harmonize the HMR with the UN Model Regulations, IMDG
Code, and the ICAO TI to clarify that the 500 gram limit per package
does not apply to UN 1344 but does apply to UN 3364.
Revise Special Provision 136, for Dangerous goods in
machinery or apparatus, in Sec. 172.102 to include reference to
subpart G of part 173.
Remove reference to obsolete Special Provision 18 for the
HMT entry ``UN 1044, Fire extinguishers'' and in Sec. 180.209(j).
Hazard Communication (Marking, Labeling, Placarding, Emergency
Response):
Correct a reference in Sec. 172.201 to exceptions for the
requirement to provide an emergency response telephone number on a
shipping paper.
Revise Sec. Sec. 172.301(f), 172.326(d) and 172.328(e) to
include the clarification that the NOT-ODORIZED or NON-ODORIZED marking
may appear on packagings used for both unodorized and odorized LPG, and
remove the effective date of October 1, 2006 if it appears these
paragraphs, as the effective date has passed.
Amend Sec. 172.406(d) by expressly authorizing the use of
labels described in subpart E with a dotted or solid line outer border
on a surface background of contrasting color.
Amend the address in Sec. 172.407(d)(4)(ii) to read
Standards and Rulemaking Division, Pipeline and Hazardous Materials
Safety Administration, U.S. Department of Transportation, East
Building, 1200 New Jersey Avenue SE., Washington, DC 20590-0001.
Clarify the marking size requirements for an IBC that is
labeled instead of placarded by replacing the bulk package marking
reference in Sec. 172.514(c) with the non-bulk marking reference,
Sec. 172.301(a)(1).
Require that emergency response telephone numbers be
displayed on shipping papers numerically (responds to petition for
rulemaking P-1597).
Shipper Requirements:
Revise Sec. 173.4a(a) to clarify that articles (including
aerosols) are not eligible for excepted quantity reclassification under
Sec. 173.4a, although some are eligible to be shipped as small
quantities by highway and rail in Sec. 173.4.
Revise Sec. 173.21(e) to include the prohibition of
transporting or offering for transport materials in the same transport
vehicle (e.g. trailer, rail car) with another material, the mixing of
which is likely to cause a dangerous evolution of heat, flammable or
poisonous gases or vapors, or to produce corrosive materials.
Clarify that the requirements provided in paragraph Sec.
173.24a(c)(1)(iv) do not apply to limited quantities packaged in
accordance with Sec. 173.27(f)(2).
Clarify the quantity limits for mixed contents packages
prepared in accordance with Sec. 173.27(f)(2).
Clarify the requirements applicable to bulk transportation
of combustible liquids by adding Sec. 173.150(f)(3)(xi) stating that
the registration requirements in subpart G of part 107 is applicable
and revising Sec. Sec. 173.150(f)(3)(ix) and 173.150(f)(3)(x) for
punctuation applicable to a listing of requirements.
Require that certain shipments of nitric acid utilizing
glass inner packagings be contained in intermediate packaging (responds
to petition for rulemaking P-1601).
Add a new paragraph (j) in Sec. 173.159 to address the
need for provisions that allow shippers to prepare for transport and
offer into transportation damaged wet electric storage batteries.
Revise Sec. 173.166(e)(6) to add the words ``or cargo
vessel.''
Revise Sec. Sec. 173.170 and 173.171 by changing the term
motor vehicle to transport vehicle to allow for motor vehicles
comprised of more than one cargo-carrying body to carry 100 pounds of
black or smokeless powder reclassed as Division 4.1 in each cargo-
carrying body instead of 100 lbs total in the motor vehicle.
Revise the provisions in Sec. 173.199(a)(4) by removing
the reference to the steel rod impact test in Sec. 178.609(h).
Amend the bulk packaging section reference in Column (8C)
of the HMT from Sec. 173.240 to Sec. 173.216 for the entries NA2212,
UN2212, and UN2590. In addition, we are proposing to revise paragraph
(c)(1) in Sec. 173.216 by authorizing the use of bulk packages
prescribed in Sec. 173.240.
Amend Sec. 173.306(k) to clarify that aerosols shipped
for recycling or disposal by motor vehicle containing a limited
quantity are afforded the applicable exceptions provided for ORM-D
materials granted under Sec. Sec. 173.306(i) and 173.156(b).
Modal Requirements (Air, Vessel, and Highway):
Create a new paragraph (d) in Sec. 175.1, stating that
this subchapter does not apply to dedicated air ambulance,
firefighting, or search and rescue operations.
Correct Sec. 175.8 by adding the appropriate 14 CFR, Part
125 citations.
Clarifying exceptions for passengers, crewmembers, and air
operators in paragraphs (a)(18), (a)(22), and (a)(24) of Sec. 175.10.
Clarify Sec. 175.75(e)(2) by replacing the word
``located'' with ``certificated.''
Clarify Sec. 176.30(a)(4) by replacing the word
``packaging'' with ``package.''
[[Page 3807]]
Clarify that the loading restrictions in Sec.
177.835(c)(1) through (4) area applicable to Sec. 177.848(e).
Packaging design and requalification:
Revise Sec. 178.65(i)(1) to correctly reference the
manufacturer's report requirements in Sec. 178.35(g).
Clarify Sec. 178.337-17(a) to eliminate confusion of the
name plate and specification plate requirements.
Correct an inadvertent editorial error in the formula in
Sec. 178.345-3(c)(1).
Include provisions consistent with the non-bulk packaging
and IBC approval provisions for Large Packagings in Sec. 178.955.
Clarify the applicability to subpart E in Sec. 180.401 by
revising the term ``person'' to ``hazmat employee or hazmat employer.''
Extend the pressure test and internal visual inspection
test interval to ten years for certain MC 331 cargo tanks in dedicated
propane delivery service (responds to petition for rulemaking P-1604).
Clarify the requirements applicable to the testing of
pressure relief devices for cargo tank motor vehicles (responds to
petition for rulemaking P-1609).
Probable Environmental Impacts of the Alternatives:
Background: Hazardous materials are substances that may pose a
threat to public safety or the environment during transportation
because of their physical, chemical, or nuclear properties. The
hazardous materials regulatory system is a risk management system that
is prevention-oriented and focused on reducing the probability and
quantity of a hazardous material release. Hazardous materials are
categorized by hazard analysis and experience into hazard classes and
packing groups. The regulations require each shipper to classify a
material in accordance with these hazard classes and packing groups.
The process of classifying a hazardous material is itself a form of
hazard analysis. Further, the regulations require the shipper to
communicate a material's hazards through use of the hazard class,
packing group, and proper shipping name on the shipping paper and the
use of labels on packages and placards on transport vehicles. Thus, the
shipping paper, labels, and placards communicate the most significant
findings of the shipper's hazard analysis. A hazardous material is
assigned to one of three packing groups based upon its degree of
hazard, from a high hazard, Packing Group I to a low hazard, Packing
Group III material. The quality, damage resistance, and performance
standards of the packaging in each packing group are appropriate for
the hazards of the material transported.
Under the HMR, hazardous materials are transported by aircraft,
vessel, rail, and highway. The potential for environmental damage or
contamination exists when packages of hazardous materials are involved
in accidents or en route incidents resulting from cargo shifts, valve
failures, package failures, loading, unloading, collisions, handling
problems, or deliberate sabotage. The release of hazardous materials
can cause the loss of ecological resources (e.g. wildlife habitats) and
the contamination of air, aquatic environments, and soil. Contamination
of soil can lead to the contamination of ground water. Compliance with
the HMR substantially reduces the possibility of accidental release of
hazardous materials.
When developing potential regulatory requirements, PHMSA evaluates
those requirements to consider the environmental impact of each
amendment. Specifically, PHMSA evaluates the risk of release and
resulting environmental impact, risk to human safety, including any
risk to first responders, longevity of the packaging, and potential
impact of a proposed regulation in a defined area. We have determined
that most of the regulatory changes proposed in this rulemaking are
editorial in nature. As such, these amendments have no impact on the
risk of release and resulting environmental impact, human safety,
longevity of the packaging, and none of these amendments would be
carried out in a defined geographic area. General possible
environmental benefits, and detriments, are discussed below.
Alternative 1: No Action
If PHMSA were to select the No Action Alternative, current
regulations would remain in place, and no new provisions would be
added. However, this option would not address outstanding petitions for
rulemaking, NTSB Safety Recommendations or consider amendments based on
PHMSA's own initiatives intended to update, clarify, or provide relief
from certain existing regulatory requirements. Foregone efficiencies in
the No Action Alternative also include freeing up limited resources to
concentrate on hazardous materials transportation issues of potentially
much greater environmental impact.
Additionally, the Preferred Alternative encompasses enhanced and
clarified regulatory requirements, which would result in increased
compliance and fewer environmental and safety incidents. Not adopting
the proposed environmental and safety requirements in the NPRM under
the No Action Alternative would result in a lost opportunity for
reducing environmental and safety-related incidents.
Greenhouse gas emissions would remain the same under the No Action
Alternative.
Alternative 2: Go Forward With the Proposed Amendments to the HMR in
This NPRM
If PHMSA selects the provisions as proposed in this NPRM, we
believe that safety and environmental risks would be reduced and that
protections to human health and environmental resources would be
increased.
Enhanced environmental protection will also be achieved through
more targeted and effective training. This proposed set of amendments
will eliminate inconsistent hazardous materials regulations, which
hamper compliance training efforts. By maintaining consistency between
these international regulations and the HMR, shippers and carriers are
able to train their hazardous materials employees in a single set of
requirements for classification, packaging, hazard communication,
handling, and stowage, thereby minimizing the possibility of improperly
preparing and transporting a shipment of hazardous materials because of
differences between domestic and international regulations. This
proposed set of amendments will create more streamlined hazardous
regulations, resulting in compliance training efforts which facilitate
the regulated community's ability to comply with the HMR. Potential
environmental impacts of each proposed group of amendments in
Alternative 2 (selected for NPRM) are discussed individually below.
Incorporation by Reference and Use of International Standards:
PHMSA believes that this proposed set of amendments, which will
increase standardization and consistency of regulations, will result in
greater protection of human health and the environment. Consistency
between US and international regulations enhances the safety and
environmental protection of international hazardous materials
transportation through better understanding of the regulations, an
increased level of industry compliance, the smooth flow of hazardous
materials from origin to destination, and consistent emergency response
in the event of a hazardous materials incident. Incorporation of the
CGA Publication G-1.6, Standard for Mobile Acetylene Trailer Systems,
will mitigate acetylene release and enhance environmental protection
during overturn incidents
[[Page 3808]]
and unloading. Incorporation of AAR Manual of Standards and Recommended
Practices, Section C-III, Specifications for Tank Cars, Specification
M-1002 (AAR Specifications for Tank Cars) and certain subsequent
amendments will update the previously incorporated 2000 edition
ensuring increased safety through compliance with revised tank car
standards.
Current greenhouse gas emissions would be unaffected under this
proposed set of amendments.
Section 172.101 Hazardous Materials Table and Sec. 172.102 Special
Provisions:
PHMSA believes that this proposed set of amendments, which will
increase standardization and consistency of regulations, will result in
greater protection of human health and the environment. Consistency
between U.S. and international regulations enhances the safety and
environmental protection of international hazardous materials
transportation through better understanding of the regulations, an
increased level of industry compliance, the smooth flow of hazardous
materials from their points of origin to their points of destination,
and consistent emergency response in the event of a hazardous materials
incident. New and revised entries to the HMT reflect emerging
technologies, and a need to better describe or differentiate between
existing entries. These proposed changes mirror changes in the
Dangerous Goods list of The 18th Revised Edition of the UN Model
Regulations, the 2013-2014 ICAO TI and the 37-14 amendments to the IMDG
Code. It is extremely important for the domestic HMR to mirror the UN
Model Regulations, the ICAO TI, and the IMDG Code with respect to the
entries in the HMT to ensure consistent naming conventions across modes
and international borders.
The packing group assignment reflects a degree of danger associated
with a particular material and identifies appropriate packaging.
However, assignment of a packing group is not appropriate in all cases
(e.g. explosives, gases, radioactive material). In such cases the
packing group does not indicate a degree of danger and the packaging
requirements for those materials are specified in the appropriate
section in part 173. The proposed change to eliminate a packing group
designation for materials classified as explosives and organic
peroxides specifically listed in the HMT provides a level of
consistency, without diminishing environmental protection and safety.
Current greenhouse gas emissions would be unaffected under this
proposed set of amendments.
Hazard Communication (Marking, Labeling, Placarding, Emergency
Response):
PHMSA believes that this proposed set of amendments, which will
provide for enhanced hazard communication (hazcom), will result in
greater protection of human health and the environment. The proposed
changes communicate the nature of various specialized packaging
configurations to package handlers and emergency responders. The
proposed amendments would ensure that hazard markings are visible,
universally recognizable, and that they contain all information needed
by emergency responders, thus resulting in fewer incidents with impacts
to the environment and safety.
Similar to the above sets of amendments, PHMSA believes that this
proposed set of amendments, which will increase standardization and
consistency of regulations, will result in greater protection of human
health and the environment. Consistency between U.S. and international
regulations enhances the safety and environmental protection of
international hazardous materials transportation through better
understanding of the regulations, an increased level of industry
compliance, the smooth flow of hazardous materials from their points of
origin to their points of destination, and consistent emergency
response in the event of a hazardous materials incident.
Current greenhouse gas emissions would be unaffected under this
proposed set of amendments.
Shipper Requirements:
PHMSA believes that this proposed amendment, which will revise,
clarify and enhance current regulations, will result in greater
protection of human health and the environment. Compliance with the HMR
will be facilitated for shippers and transporters of hazardous
materials through regulations which are easier to understand and more
streamlined. Additionally, the revisions include emphasis being placed
in areas requiring more attention.
Specific to this set of amendments, improving the packaging
requirements applicable to glass packages of nitric acid reduces the
occurrences of fires caused by broken inner containers and enhances
human health and environmental protection. PHMSA believes that the
additional intermediate packaging required by this particular amendment
will add another layer of protection in preventing breakage, leakage
and fires. Additionally, this particular amendment creates a more
streamlined and efficient HMR through incorporation of a petition for
rulemaking, P-1601. A more streamlined and efficient HMR allows both
regulators and the regulated community to target limited resources at
the most pressing hazmat compliance issues.
Current greenhouse gas emissions would be unaffected under this
proposed set of amendments.
Modal Requirements (Air, Vessel, and Highway):
PHMSA believes that this proposed amendment, which will revise,
clarify and enhance current regulations, will result in greater
protection of human health and the environment. Compliance with the HMR
will be facilitated for air, vessel and highway shippers and
transporters of hazardous materials through regulations which are
easier to understand and more streamlined. Additionally, the revisions
include emphasis being placed in areas requiring more attention.
Current greenhouse gas emissions would be unaffected under this
proposed set of amendments.
Packaging design and requalification:
PHMSA believes that this proposed amendment, which will revise,
clarify and enhance current regulations, will result in greater
protection of human health and the environment. Compliance with the HMR
will be facilitated for shippers and transporters of hazardous
materials through regulations which are easier to understand and more
streamlined. Additionally, the revisions include emphasis being placed
in areas requiring more attention.
Specific to this set of amendments, decreasing the required
frequency for pressure testing and visual inspection of certain cargo
tanks in dedicated propane service by extending the requalification
period from five years to ten years will ease the burden on regulators
and the regulated community. This test, which requires significant
equipment down-time and man-hours to perform, has been shown to achieve
no additional safety or environmental protection when performed at a
five- versus a ten-year interval. Pressure testing requires a
significant amount of water usage. Decreasing the testing frequency by
half will result in significant volumes of water being conserved.
Additionally, this particular amendment creates a more streamlined and
efficient HMR through incorporation of a petition for rulemaking, P-
1609. A more streamlined and efficient HMR allows both regulators and
the regulated community to target limited resources at
[[Page 3809]]
the most pressing hazmat compliance issues.
Current greenhouse gas emissions would be unaffected under these
amendments.
Agencies Consulted
This NPRM would affect some PHMSA stakeholders, including hazardous
materials shippers and carriers by highway, rail, vessel, and aircraft,
as well as package manufacturers and testers. PHMSA is seeking comment
on the environmental assessment contained in this NPRM. In addition,
PHMSA specifically coordinated with the following Federal Agencies and
modal partners:
Department of Justice
Environmental Protection Agency
Health and Human Services
Occupational Safety and Health Administration
Federal Aviation Administration
Federal Motor Carrier Safety Administration
Federal Railroad Administration
United States Coast Guard
Conclusion
PHMSA proposes to make miscellaneous amendments to the HMR based on
comments from the regulated community, NTSB recommendations, and
PHMSA's own rulemaking initiatives. The proposed amendments are
intended to update, clarify, or provide relief from certain existing
regulatory requirements to promote safer transportation practices;
eliminate unnecessary regulatory requirements; facilitate international
commerce; and make these requirements easier to understand. These
proposed clarifications of regulatory requirements, if adopted, will
foster a greater level of compliance with the HMR and thus, diminished
levels of hazardous materials transportation incidents affecting the
health and safety of the environment. Therefore, the net environmental
impact of this proposal will be positive.
J. Privacy Act
Anyone is able to search the electronic form of any written
communications and comments received into any of our dockets by the
name of the individual submitting the document (or signing the
document, if submitted on behalf of an association, business, labor
union, etc.). You may review DOT's complete Privacy Act Statement at
https://www.dot.gov/privacy.
K. International Trade Analysis
The Trade Agreements Act of 1979 (Pub. L. 96-39), as amended by the
Uruguay Round Agreements Act (Pub. L. 103-465), prohibits Federal
agencies from establishing any standards or engaging in related
activities that create unnecessary obstacles to the foreign commerce of
the United States. Pursuant to these Acts, establishing standards is
not considered an unnecessary obstacle to the foreign commerce of the
United States, so long as the standards have a legitimate domestic
objective, such as the protection of safety, and do not operate in a
manner that excludes imports that meet this objective. The statute also
requires consideration of international standards and, where
appropriate, that they be the basis for U.S. standards. PHMSA notes the
purpose is to ensure the safety of the American public, and has
assessed the effects of this rule to ensure that it does not exclude
imports that meet this objective. As a result, this proposed rule is
not considered as creating an unnecessary obstacle to foreign commerce.
List of Subjects
49 CFR Part 107
Administrative practice and procedure, Hazardous materials
transportation, Penalties, Reporting and recordkeeping requirements.
49 CFR Part 171
Exports, Hazardous materials transportation, Hazardous waste,
Imports, Incorporation by reference, Reporting and recordkeeping
requirements.
49 CFR Part 172
Education, Hazardous materials transportation, Hazardous waste,
Incorporation by reference, Labeling, Markings, Packaging and
containers, Reporting and recordkeeping requirements.
49 CFR Part 173
Hazardous materials transportation, Incorporation by reference,
Packaging and containers, Radioactive materials, Reporting and
recordkeeping requirements, Uranium.
49 CFR Part 175
Air carriers, Hazardous materials transportation, Radioactive
materials, Reporting and recordkeeping requirements.
49 CFR Part 176
Hazardous materials transportation, Maritime carriers, Radioactive
materials, Reporting and recordkeeping requirements.
49 CFR Part 177
Hazardous materials transportation, Loading and unloading,
Segregation and separation.
49 CFR Part 178
Hazardous materials transportation, Incorporation by reference,
Motor vehicle safety, Packaging and containers, Reporting and
recordkeeping requirements.
49 CFR Part 179
Hazardous materials transportation, Railroad safety, Reporting and
recordkeeping requirements.
49 CFR Part 180
Hazardous materials transportation, Motor carriers, Motor vehicle
safety, Packaging and containers, Railroad safety, Reporting and
recordkeeping requirements.
In consideration of the foregoing, we propose to amend 49 CFR
Chapter I as follows:
PART 107--HAZARDOUS MATERIALS PROGRAM PROCEDURES
0
1. The authority citation for part 107 continues to read as follows:
Authority: 49 U.S.C. 5101-5128, 44701; 101 section 4 (28 U.S.C.
2461 note); Pub. L. 104-121 sections 212-213; Pub. L. 104-134
section 31001; 49 CFR 1.81, 1.96 and 1.97.
0
2. In Sec. 107.402, revise paragraphs (d)(1)(i), (e), and (f) to read
as follows:
Sec. 107.402 Application for designation as a certification agency.
* * * * *
(d) * * *
(1) * * *
(i) Be a U.S. resident, or for a non-U.S. resident, have a
designated U.S. agent representative as specified in Sec. 105.40 of
this subchapter;
* * * * *
(e) Lighter Certification Agency. Prior to examining and testing
lighters (UN1057) for compliance with the requirements of Sec. 173.308
of this chapter a person must submit an application to, and be approved
by, the Associate Administrator to act as a lighter certification
agency. In addition to paragraph (b) of this section, the application
must include the following information:
(1) The name and address of each facility where lighters are
examined and tested;
(2) A detailed description of the applicant's qualifications and
ability to examine and test lighters and certification that the
requirements specified by Sec. 173.308 of this chapter have been met;
and
[[Page 3810]]
(3) A statement that the agency is independent of and not owned by
a lighter manufacturer, distributor, import or export company, or
proprietorship.
(f) Portable tank and MEGC Certification Agencies. Prior to
inspecting portable tanks or multi-element gas containers (MEGCs) for
compliance with the requirements of Sec. 180.605(k) of this chapter,
performing periodic testing, inspection and repair of portable tanks
specified in Sec. 180.352 of this chapter, and approval of MEGCs
specified in Sec. 178.74 of this chapter, a person must submit an
application to, and be approved by, the Associate Administrator to act
as a certification agency. In addition to paragraph (b) of this
section, the application must provide the following information:
(1) A name and address of each facility where the portable tank or
MEGC is examined and tested;
(2) A detailed description of the applicant's qualifications and
ability to examine and test portable tanks or MEGCs and certify that
the requirements specified by Sec. 178.273 of this chapter,
specifications for UN portable tanks, or Sec. 178.74 of this chapter
for the approval of MEGCs have been met; and
(3) A statement indicating that the agency is independent of and
not owned by a portable tank or MEGC manufacturer, owner, or
distributor.
0
3. In Sec. 107.807, revise paragraph (b)(3) to read as follows:
Sec. 107.807 Approval of non-domestic chemical analyses and tests.
* * * * *
(b) * * *
(3) The name of the independent inspection agency to be used to
certify the analyses and tests and a statement indicating that this
inspection agency is independent of and not owned by a cylinder
manufacturer, owner, or distributor; and
* * * * *
PART 171--GENERAL INFORMATION, REGULATIONS, AND DEFINITIONS
0
4. The authority citation for part 171 continues to read as follows:
Authority: 49 U.S.C. 5101-5128, 44701; 49 CFR 1.81 and 1.97;
Pub. L. 101-410 section 4 (28 U.S.C. 2461 note); Pub. L. 104-134
section 31001.
0
5. In Sec. 171.7:
0
a. Revise paragraph (k);
0
b. Redesignate paragraphs (n)(13) through (21) as (n)(14) through (22)
and add new paragraph (n)(13); and
0
c. In paragraph (dd)(2)(ii), Table 1 to 49 CFR 171.7--Materials Not
Incorporated by Reference, entry for ``Compressed Gas Association,
Inc., 4221 Walney Road, 5th Floor, Chantilly, Virginia 20151'' and the
associated entry for document ``CGA C-1.1, Personnel Training and
Certification Guidelines for Cylinder Requalification By the Volumetric
Expansion Method, 2004, First Edition'' are removed.
The revisions read as follows:
Sec. 171.7 Reference material.
* * * * *
(k) Association of American Railroads, American Railroads Building,
50 F Street NW., Washington, DC 20001: telephone (877) 999-8824,
https://www.aarpublications.com/.
(1) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Chapter 1, October 2013; into Sec. Sec.
179.7, 179.24, 180.503, and 180.517.
(2) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Chapter 2, April 2010; into Sec. Sec.
179.7 and 180.503.
(3) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Chapter 3, October, 2007; into
Sec. Sec. 179.7 and 180.503.
(4) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Chapter 5, October, 2007; into
Sec. Sec. 179.7, 179.16 and 180.503.
(5) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Chapter 6, July 2012; into Sec. Sec.
179.7, 179.400-6, and 180.503.
(6) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Appendix A, October 2013; into
Sec. Sec. 173.314, 179.7, 179.15, 179.300-15, 179.300-17, 179.400-20,
and 180.503.
(7) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Appendix B, January 2014; into
Sec. Sec. 179.7 and 180.503.
(8) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Appendix C, October 2007; into
Sec. Sec. 179.7, 179.22, 179.220-26, 179.400-25, and 180.503.
(9) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Appendix D, except for Sections 2.0,
4.1, 4.2, 4.3, and 4.4, October 2013; into Sec. Sec. 179.7, 180.503,
and 180.509.
(10) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Appendix E, April 2010; into Sec. Sec.
173.31, 179.7, 179.20, 179.100-12, 179.100-14, 179.101-1, 179.103-5,
179.200-9, 179-200-13, 179.200-17, 179.220-14, 179.220-18, and 180.503.
(11) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Appendix L, October 2013; into
Sec. Sec. 179.7 and 180.503.
(12) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Appendix M, July 2012; into Sec. Sec.
179.7, 179.200-7, 179.201-6, 179.220-6, 179.220-7, 179.400-5, 179.400-
8, 180.503, and 180.515.
(13) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Appendix R, October 2007; into
Sec. Sec. 179.6, 179.7, and 180.503.
(14) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Appendix T, October 2007; into
Sec. Sec. 179.7 and 180.503.
(15) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Appendix U, October 2013; into
Sec. Sec. 179.7 and 180.503.
(16) AAR Manual of Standards and Recommended Practices, Section C--
III, Specifications for Tank Cars, Specification M-1002 (AAR
Specifications for Tank Cars), Appendix W, October 2007; into
Sec. Sec. 179.7, 179.100-9, 179.100-10, 179.100-13, 179.100-18,
179.102-1, 179.102-4, 179.102-17, 179.200-10, 179.200-11, 179.200-22,
179.220-10, 179.220-11,
[[Page 3811]]
179.300-9, 179.300-10, 179.400-5, 179.400-11, 179.400-12, 179.400-15,
179.400-18, and 180.503.
(17) AAR Manual of Standards and Recommended Practices, Section I,
Specially Equipped Freight Car and Intermodal Equipment, 1988, into
Sec. 174.55; 174.63.
(18) AAR Specifications for Design, Fabrication and Construction of
Freight Cars, Volume 1, 1988, into Sec. 179.16.
(19) AAR Standard 286; AAR Manual of Standards and Recommended
Practices, Section C, Car Construction Fundamentals and Details,
Standard S-286, Free/Unrestricted Interchange for 286,000 lb Gross Rail
Load Cars (Adopted 2002; Revised: 2003, 2005, 2006), into Sec. 179.13.
* * * * *
(n) * * *
(13) CGA Pamphlet G-1.6 Standard for Mobile Acetylene Trailer
Systems, 2011, into Sec. 173.301.
(14) CGA Pamphlet G-2.2, Guideline Method for Determining Minimum
of 0.2% Water in Anhydrous Ammonia, 1985, Second Edition, Reaffirmed
1997, into Sec. 173.315.
(15) CGA Pamphlet G-4.1, Cleaning Equipment for Oxygen Service,
1985, into Sec. 178.338-15.
(16) CGA Pamphlet P-20, Standard for the Classification of Toxic
Gas Mixtures, 1995, into Sec. 173.115.
(17) CGA Pamphlet P-20, Standard for the Classification of Toxic
Gas Mixtures, 2003, Third Edition, into Sec. 173.115.
(18) CGA S-1.1, Pressure Relief Device Standards--Part 1--Cylinders
for Compressed Gases, (with the exception of paragraph 9.1.1.1),
Twelfth Edition, 2005, into Sec. 173.301, 173.304a 178.75.
(19) CGA Pamphlet S-1.2, Safety Relief Device Standards Part 2--
Cargo and Portable Tanks for Compressed Gases, 1980, into Sec.
173.315; 173.318; 178.276; 178.277.
(20) CGA S-7, Method for Selecting Pressure Relief Devices for
Compressed Gas Mixtures in Cylinders, 2005, into Sec. 173.301.
(21) CGA Technical Bulletin TB-2, Guidelines for Inspection and
Repair of MC-330 and MC-331 Cargo Tanks, 1980, into Sec. 180.407;
180.413.
(22) CGA Technical Bulletin TB-25, Design Considerations for Tube
Trailers, 2008 Edition, into Sec. 173.301.
* * * * *
0
6. In Sec. 171.22, paragraph (f)(1) is revised to read as follows:
Sec. 171.22 Authorization and conditions for the use of international
standards and regulations.
* * * * *
(f) Complete information and certification. (1) Except for
shipments into the United States from Canada conforming to Sec.
171.12, each person importing a hazardous material into the United
States must provide the shipper and the forwarding agent at the place
of entry into the United States timely and complete written information
as to the requirements of this subchapter applicable to the particular
shipment.
* * * * *
0
7. In Sec. 171.23, paragraphs (b)(10)(iv)(A) and (B) are revised to
read follows:
Sec. 171.23 Requirements for specific materials and packagings
transported under the ICAO Technical Instructions, IMDG Code, Transport
Canada TDG Regulations, or the IAEA Regulations.
* * * * *
(b) * * *
(10) * * *
(iv) * * *
(A) For a package transported in accordance with the IMDG Code in a
closed transport vehicle or freight container, a label or placard
conforming to the IMDG Code specifications for a ``Class 2.3'' or
``Class 6.1'' label or placard may be substituted for the POISON GAS or
POISON INHALATION HAZARD label or placard, as appropriate. The
transport vehicle or freight container must be marked with the
identification numbers for the hazardous material in the manner
specified in Sec. 172.313(c) of this subchapter and placarded as
required by subpart F of part 172 of this subchapter.
(B) For a package transported in accordance with the Transport
Canada TDG Regulations in a closed transport vehicle or freight
container, a label or placard conforming to the TDG Regulations
specifications for a ``Class 2.3'' or ``Class 6.1'' label or placard
may be substituted for the POISON GAS or POISON INHALATION HAZARD label
or placard, as appropriate. The transport vehicle or freight container
must be marked with the identification numbers for the hazardous
material in the manner specified in Sec. 172.313(c) of this subchapter
and placarded as required by subpart F of part 172 of this subchapter.
While in transportation in the United States, the transport vehicle or
freight container may also be placarded in accordance with the
appropriate TDG Regulations in addition to being placarded with the
POISON GAS or POISON INHALATION HAZARD placards.
* * * * *
PART 172--HAZARDOUS MATERIALS TABLE, SPECIAL PROVISIONS, HAZARDOUS
MATERIALS COMMUNICATIONS, EMERGENCY RESPONSE INFORMATION, AND
TRAINING REQUIREMENTS
0
8. The authority citation for part 172 continues to read as follows:
Authority: 49 U.S.C. 5101-5128; 44701; 49 CFR 1.81 and 1.97.
0
9. In Sec. 172.101, the Hazardous Materials Table is amended by
revising entries under ``[REVISE]'' in the appropriate alphabetical
sequence to read as follows:
Sec. 172.101 Purpose and use of hazardous materials table.
* * * * *
[[Page 3812]]
Sec. 172.101--Hazardous Materials Table
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
(8) (9) (10)
Hazardous ---------------------------------------------------------------------------------------------------------------
materials Special Packaging (Sec. 173.***) Quantity limitations (see Sec. Vessel stowage
Symbols descriptions and Hazard class or Identification PG Label codes provisions ------------------------------------------------ Sec. 173.27 and 175.75) -------------------------------
proper shipping division Nos. (Sec. --------------------------------
names 172.102) Exceptions Non-bulk Bulk Passenger Cargo aircraft Location Other
aircraft/rail only
(1) (2)............... (3)............ (4).............. (5)........... (6).............. (7)........... (8A).......... (8B).......... (8C).......... (9A).......... (9B).......... (10A)......... (10B)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* * * * * * *
[REVISE]..........
* * * * * * *
I............ Air bag inflators, 1.4G........... UN0503........... .............. 1.4G............. 161, A200..... None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
or Air bag
modules, or Seat-
belt
pretensioners.
* * * * * * *
D............ Ammonium nitrate- 1.5D........... NA0331........... .............. 1.5D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25, 19E.
fuel oil mixture
containing only
prilled ammonium
nitrate and fuel
oil.
* * * * * * *
Ammonium nitrate, 1.1D........... UN0222........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 19E.
with more than
0.2 percent
combustible
substances,
including any
organic substance
calculated as
carbon, to the
exclusion of any
other added
substance.
* * * * * * *
Ammonium 1.1D........... UN0402........... .............. 1.1D............. 107........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 19E.
perchlorate.
* * * * * * *
Ammonium picrate, 1.1D........... UN0004........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E, 19E.
dry or wetted
with less than 10
percent water, by
mass.
* * * * * * *
Ammunition, 1.2G........... UN0171........... .............. 1.2G............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25.
illuminating with
or without
burster,
expelling charge
or propelling
charge.
Ammunition, 1.3G........... UN0254........... .............. 1.3G............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25.
illuminating with
or without
burster,
expelling charge
or propelling
charge.
Ammunition, 1.4G........... UN0297........... .............. 1.4G............. .............. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25.
illuminating with
or without
burster,
expelling charge
or propelling
charge.
Ammunition, 1.3J........... UN0247........... .............. 1.3J............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 23E.
incendiary liquid
or gel, with
burster,
expelling charge
or propelling
charge.
[[Page 3813]]
* * * * * * *
Ammunition, 1.2H........... UN0243........... .............. 1.2H............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 05............ 25, 14E, 15E,
incendiary, white 17E.
phosphorus, with
burster,
expelling charge
or propelling
charge.
Ammunition, 1.3H........... UN0244........... .............. 1.3H............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 05............ 25, 14E, 15E,
incendiary, white 17E.
phosphorus, with
burster,
expelling charge
or propelling
charge.
Ammunition, 1.2G........... UN0009........... .............. 1.2G............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25.
incendiary with
or without
burster,
expelling charge,
or propelling
charge.
Ammunition, 1.3G........... UN0010........... .............. 1.3G............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25.
incendiary with
or without
burster,
expelling charge,
or propelling
charge.
Ammunition, 1.4G........... UN0300........... .............. 1.4G............. .............. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25.
incendiary with
or without
burster,
expelling charge
or propelling
charge.
Ammunition, 1.4G........... UN0362........... .............. 1.4G............. .............. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25.
practice.
Ammunition, 1.3G........... UN0488........... .............. 1.3G............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25.
practice.
Ammunition, proof. 1.4G........... UN0363........... .............. 1.4G............. .............. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25.
* * * * * * *
Ammunition smoke, 1.2H........... UN0245........... .............. 1.2H............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 05............ 25, 14E, 15E,
white phosphorus 17E.
with burster,
expelling charge,
or propelling
charge.
Ammunition, smoke, 1.3H........... UN0246........... .............. 1.3H............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 05............ 25, 14E, 15E,
white phosphorus 17E.
with burster,
expelling charge,
or propelling
charge.
Ammunition, smoke 1.2G........... UN0015........... .............. 1.2G............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25, 17E.
with or without
burster,
expelling charge
or propelling
charge.
Ammunition, smoke 1.3G........... UN0016........... .............. 1.3G............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25, 17E.
with or without
burster,
expelling charge
or propelling
charge.
Ammunition, smoke 1.4G........... UN0303........... .............. 1.4G............. .............. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25, 14E, 15E,
with or without 17E.
burster,
expelling charge
or propelling
charge.
* * * * * * *
Ammunition, tear- 1.2G........... UN0018........... .............. 1.2G, 8, 6.1..... .............. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25, 17E.
producing with
burster,
expelling charge
or propelling
charge.
Ammunition, tear- 1.3G........... UN0019........... .............. 1.3G, 8, 6.1..... .............. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25, 17E.
producing with
burster,
expelling charge
or propelling
charge.
Ammunition, tear- 1.4G........... UN0301........... .............. 1.4G, 8, 6.1..... .............. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25, 14E, 15E,
producing with 17E.
burster,
expelling charge
or propelling
charge.
* * * * * * *
G............ Ammunition, toxic 1.2K........... UN0020........... .............. 1.2K, 6.1........ .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E,
with burster, 17E.
expelling charge,
or propelling
charge.
[[Page 3814]]
G............ Ammunition, toxic 1.3K........... UN0021........... .............. 1.3K, 6.1........ .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E,
with burster, 17E.
expelling charge,
or propelling
charge.
* * * * * * *
Articles, 1.6N........... UN0486........... .............. 1.6N............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
explosive,
extremely
insensitive or
Articles, EEI.
G............ Articles, 1.4S........... UN0349........... .............. 1.4S............. 101........... None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
explosive, n.o.s.
G............ Articles, 1.4B........... UN0350........... .............. 1.4B............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
explosive, n.o.s.
G............ Articles, 1.4C........... UN0351........... .............. 1.4C............. 101........... None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
explosive, n.o.s.
G............ Articles, 1.4D........... UN0352........... .............. 1.4D............. 101........... None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
explosive, n.o.s.
G............ Articles, 1.4G........... UN0353........... .............. 1.4G............. 101........... None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
explosive, n.o.s.
G............ Articles, 1.1L........... UN0354........... .............. 1.1L............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 02............ 25, 14E, 15E.
explosive, n.o.s.
G............ Articles, 1.2L........... UN0355........... .............. 1.2L............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E.
explosive, n.o.s.
G............ Articles, 1.3L........... UN0356........... .............. 1.3L............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E.
explosive, n.o.s.
G............ Articles, 1.1C........... UN0462........... .............. 1.1C............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
explosive, n.o.s.
G............ Articles, 1.1D........... UN0463........... .............. 1.1D............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
explosive, n.o.s.
G............ Articles, 1.1E........... UN0464........... .............. 1.1E............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
explosive, n.o.s.
G............ Articles, 1.1F........... UN0465........... .............. 1.1F............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
explosive, n.o.s.
G............ Articles, 1.2C........... UN0466........... .............. 1.2C............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
explosive, n.o.s.
G............ Articles, 1.2D........... UN0467........... .............. 1.2D............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
explosive, n.o.s.
G............ Articles, 1.2E........... UN0468........... .............. 1.2E............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
explosive, n.o.s.
G............ Articles, 1.2F........... UN0469........... .............. 1.2F............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
explosive, n.o.s.
G............ Articles, 1.3C........... UN0470........... .............. 1.3C............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
explosive, n.o.s.
G............ Articles, 1.4E........... UN0471........... .............. 1.4E............. 101........... None.......... 62............ None.......... Forbidden..... 75 kg......... 03............ 25.
explosive, n.o.s.
G............ Articles, 1.4F........... UN0472........... .............. 1.4F............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
explosive, n.o.s.
* * * * * * *
Articles, 1.2L........... UN0380........... .............. 1.2L............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E,
pyrophoric. 17E.
Articles, 1.1G........... UN0428........... .............. 1.1G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
pyrotechnic for
technical
purposes.
Articles, 1.2G........... UN0429........... .............. 1.2G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
pyrotechnic for
technical
purposes.
Articles, 1.3G........... UN0430........... .............. 1.3G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
pyrotechnic for
technical
purposes.
Articles, 1.4G........... UN0431........... .............. 1.4G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
pyrotechnic for
technical
purposes.
Articles, 1.4S........... UN0432........... .............. 1.4S............. .............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
pyrotechnic for
technical
purposes.
D............ Asbestos.......... 9.............. NA2212........... III........... 9................ 156, IB8, IP2, 155........... 216........... 216........... 200 kg........ 200 kg........ A............. 34, 40.
IP4.
* * * * * * *
Barium azide, dry 1.1A........... UN0224........... .............. 1.1A, 6.1........ 111, 117...... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
or wetted with
less than 50
percent water, by
mass.
[[Page 3815]]
* * * * * * *
Black powder, 1.1D........... UN0028........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
compressed or
Gunpowder,
compressed or
Black powder, in
pellets or
Gunpowder, in
pellets.
Black powder or 1.1D........... UN0027........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
Gunpowder,
granular or as a
meal.
* * * * * * *
I............ Blue asbestos 9.............. UN2212........... II............ 9................ 156, IB8, IP2, 155........... 216........... 216........... 200 kg........ 200 kg........ A............. 34, 40.
(Crocidolite) or IP4, T3, TP33.
Brown asbestos
(amosite,
mysorite).
Bombs, photo-flash 1.1F........... UN0037........... .............. 1.1F............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
Bombs, photo-flash 1.1D........... UN0038........... .............. 1.1D............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
Bombs, photo-flash 1.2G........... UN0039........... .............. 1.2G............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25.
Bombs, photo-flash 1.3G........... UN0299........... .............. 1.3G............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25.
* * * * * * *
Bombs, with 1.1F........... UN0033........... .............. 1.1F............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
bursting charge.
Bombs, with 1.1D........... UN0034........... .............. 1.1D............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
bursting charge.
Bombs, with 1.2D........... UN0035........... .............. 1.2D............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
bursting charge.
Bombs, with 1.2F........... UN0291........... .............. 1.2F............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
bursting charge.
Bombs with 1.1J........... UN0399........... .............. 1.1J............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 23E.
flammable liquid,
with bursting
charge.
Bombs with 1.2J........... UN0400........... .............. 1.2J............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 23E.
flammable liquid,
with bursting
charge.
Boosters with 1.1B........... UN0225........... .............. 1.1B............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
detonator.
Boosters with 1.2B........... UN0268........... .............. 1.2B............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
detonator.
Boosters, without 1.1D........... UN0042........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
detonator.
Boosters, without 1.2D........... UN0283........... .............. 1.2D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
detonator.
* * * * * * *
Bursters, 1.1D........... UN0043........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
explosive.
* * * * * * *
Calcium nitrate... 5.1............ UN1454........... III........... 5.1.............. 34, B120, IB8, 152........... 213........... 240........... 25 kg......... 100 kg........ A.............
IP3, T1, TP33.
* * * * * * *
Cartridges, flash. 1.1G........... UN0049........... .............. 1.1G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
Cartridges, flash. 1.3G........... UN0050........... .............. 1.3G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 03............ 25.
Cartridges for 1.1C........... UN0326........... .............. 1.1C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
weapons, blank.
Cartridges for 1.2C........... UN0413........... .............. 1.2C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
weapons, blank.
Cartridges for 1.4S........... UN0014........... .............. None............. .............. 63............ 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
weapons, blank or
Cartridges, small
arms, blank or
Cartridges for
tools, blank.
Cartridges for 1.3C........... UN0327........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
weapons, blank or
Cartridges, small
arms, blank.
Cartridges for 1.4C........... UN0338........... .............. 1.4C............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
weapons, blank or
Cartridges, small
arms, blank.
Cartridges for 1.2C........... UN0328........... .............. 1.2C............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
weapons, inert
projectile.
[[Page 3816]]
Cartridges for 1.4S........... UN0012........... .............. None............. .............. 63............ 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
weapons, inert
projectile or
Cartridges, small
arms.
Cartridges for 1.4C........... UN0339........... .............. 1.4C............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
weapons, inert
projectile or
Cartridges, small
arms.
Cartridges for 1.3C........... UN0417........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
weapons, inert
projectile or
Cartridges, small
arms.
Cartridges for 1.1F........... UN0005........... .............. 1.1F............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
weapons, with
bursting charge.
Cartridges for 1.1E........... UN0006........... .............. 1.1E............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
weapons, with
bursting charge.
Cartridges for 1.2F........... UN0007........... .............. 1.2F............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
weapons, with
bursting charge.
Cartridges for 1.2E........... UN0321........... .............. 1.2E............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
weapons, with
bursting charge.
Cartridges for 1.4F........... UN0348........... .............. 1.4F............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
weapons, with
bursting charge.
Cartridges for 1.4E........... UN0412........... .............. 1.4E............. .............. None.......... 62............ 62............ Forbidden..... 75 kg......... 03............ 25.
weapons, with
bursting charge.
Cartridges, oil 1.3C........... UN0277........... .............. 1.3C............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
well.
Cartridges, oil 1.4C........... UN0278........... .............. 1.4C............. .............. None.......... 62............ 62............ Forbidden..... 75 kg......... 02............ 25.
well.
Cartridges, power 1.3C........... UN0275........... .............. 1.3C............. .............. None.......... 62............ 62............ Forbidden..... 75 kg......... 04............ 25.
device.
Cartridges, power 1.4C........... UN0276........... .............. 1.4C............. 110........... None.......... 62............ 62............ Forbidden..... 75 kg......... 02............ 25.
device.
Cartridges, power 1.4S........... UN0323........... .............. 1.4S............. 110, 347...... 63............ 62............ 62............ 25 kg......... 100 kg........ 01............ 25.
device.
Cartridges, power 1.2C........... UN0381........... .............. 1.2C............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
device.
* * * * * * *
Cartridges, signal 1.3G........... UN0054........... .............. 1.3G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 03............ 25.
Cartridges, signal 1.4G........... UN0312........... .............. 1.4G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
Cartridges, signal 1.4S........... UN0405........... .............. 1.4S............. .............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
* * * * * * *
Cases, cartridge, 1.4S........... UN0055........... .............. 1.4S............. 50............ 63............ 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
empty with primer.
Cases, cartridges, 1.4C........... UN0379........... .............. 1.4C............. 50............ None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
empty with primer.
Cases, 1.4C........... UN0446........... .............. 1.4C............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
combustible,
empty, without
primer.
Cases, 1.3C........... UN0447........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
combustible,
empty, without
primer.
* * * * * * *
Charges, bursting, 1.1D........... UN0457........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
plastics bonded.
Charges, bursting, 1.2D........... UN0458........... .............. 1.2D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
plastics bonded.
Charges, bursting, 1.4D........... UN0459........... .............. 1.4D............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
plastics bonded.
Charges, bursting, 1.4S........... UN0460........... .............. 1.4S............. 347........... None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
plastics bonded.
Charges, 1.1D........... UN0048........... .............. 1.1D............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
demolition.
[[Page 3817]]
Charges, depth.... 1.1D........... UN0056........... .............. 1.1D............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
* * * * * * *
Charges, 1.1D........... UN0442........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
explosive,
commercial
without detonator.
Charges, 1.2D........... UN0443........... .............. 1.2D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
explosive,
commercial
without detonator.
Charges, 1.4D........... UN0444........... .............. 1.4D............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
explosive,
commercial
without detonator.
Charges, 1.4S........... UN0445........... .............. 1.4S............. 347........... None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
explosive,
commercial
without detonator.
Charges, 1.1C........... UN0271........... .............. 1.1C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
propelling.
Charges, 1.3C........... UN0272........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
propelling.
Charges, 1.2C........... UN0415........... .............. 1.2C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
propelling.
Charges, 1.4C........... UN0491........... .............. 1.4C............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
propelling.
Charges, 1.3C........... UN0242........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
propelling, for
cannon.
Charges, 1.1C........... UN0279........... .............. 1.1C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
propelling, for
cannon.
Charges, 1.2C........... UN0414........... .............. 1.2C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
propelling, for
cannon.
Charges, shaped, 1.4D........... UN0237........... .............. 1.4D............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
flexible, linear.
Charges, shaped, 1.1D........... UN0288........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
flexible, linear.
Charges, shaped, 1.1D........... UN0059........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
without detonator.
Charges, shaped, 1.2D........... UN0439........... .............. 1.2D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
without detonator.
Charges, shaped, 1.4D........... UN0440........... .............. 1.4D............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
without detonator.
Charges, shaped, 1.4S........... UN0441........... .............. 1.4S............. 347........... None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
without detonator.
Charges, 1.1D........... UN0060........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
supplementary
explosive.
* * * * * * *
G............ Components, 1.2B........... UN0382........... .............. 1.2B............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
explosive train,
n.o.s.
G............ Components, 1.4B........... UN0383........... .............. 1.4B............. 101........... None.......... 62............ None.......... Forbidden..... 75 kg......... 05............ 25.
explosive train,
n.o.s.
G............ Components, 1.4S........... UN0384........... .............. 1.4S............. 101........... None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
explosive train,
n.o.s.
G............ Components, 1.1B........... UN0461........... .............. 1.1B............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
explosive train,
n.o.s.
* * * * * * *
G............ Contrivances, 1.2L........... UN0248........... .............. 1.2L............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E,
water-activated, 17E.
with burster,
expelling charge
or propelling
charge.
G............ Contrivances, 1.3L........... UN0249........... .............. 1.3L............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E,
water-activated, 17E.
with burster,
expelling charge
or propelling
charge.
* * * * * * *
Cord, detonating, 1.1D........... UN0065........... .............. 1.1D............. 102........... 63(a)......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
flexible.
Cord, detonating, 1.4D........... UN0289........... .............. 1.4D............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
flexible.
Cord detonating or 1.2D........... UN0102........... .............. 1.2D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
Fuse detonating
metal clad.
Cord, detonating 1.1D........... UN0290........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
or Fuse,
detonating metal
clad.
Cord, detonating, 1.4D........... UN0104........... .............. 1.4D............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
mild effect or
Fuse, detonating,
mild effect metal
clad.
[[Page 3818]]
Cord, igniter..... 1.4G........... UN0066........... .............. 1.4G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
* * * * * * *
G............ Corrosive liquids, 8.............. UN2920........... I............. 8, 3............. A6, B10, T14, None.......... 201........... 243........... 0.5 L......... 2.5 L......... C............. 25, 40.
flammable, n.o.s. TP2, TP27.
II............ 8,3.............. B2, IB2, T11, 154........... 202........... 243........... 1 L........... 30 L.......... C............. 25, 40.
TP2, TP27.
* * * * * * *
Cutters, cable, 1.4S........... UN0070........... .............. 1.4S............. .............. None.......... 62............ 62............ 25 kg......... 100 kg........ 01............ 25.
explosive.
* * * * * * *
Cyclotetramethylen 1.1D........... UN0484........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
etetranitramine,
desensitized or
Octogen,
desensitized or
HMX, desensitized.
Cyclotetramethylen 1.1D........... UN0226........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
etetranitramine,
wetted or HMX,
wetted or
Octogen, wetted
with not less
than 15 percent
water, by mass.
* * * * * * *
Cyclotrimethylenet 1.1D........... UN0483........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
rinitramine,
desensitized or
Cyclonite,
desensitized or
Hexogen,
desensitized or
RDX, desensitized.
Cyclotrimethylenet 1.1D........... UN0072........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
rinitramine,
wetted or
Cyclonite, wetted
or Hexogen,
wetted or RDX,
wetted with not
less than 15
percent water by
mass.
* * * * * * *
Deflagrating metal 1.3C........... UN0132........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E.
salts of aromatic
nitroderivatives,
n.o.s.
* * * * * * *
Detonator 1.1B........... UN0360........... .............. 1.1B............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
assemblies, non-
electric for
blasting.
Detonator 1.4B........... UN0361........... .............. 1.4B............. 103........... 63(f), 63(g).. 62............ None.......... Forbidden..... 75 kg......... 05............ 25.
assemblies, non-
electric, for
blasting.
Detonator 1.4S........... UN0500........... .............. 1.4S............. 347........... 63(f), 63(g).. 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
assemblies, non-
electric, for
blasting.
[[Page 3819]]
Detonators, 1.1B........... UN0030........... .............. 1.1B............. .............. 63(f), 63(g).. 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
electric, for
blasting.
Detonators, 1.4B........... UN0255........... .............. 1.4B............. 103........... 63(f), 63(g).. 62............ None.......... Forbidden..... 75 kg......... 05............ 25.
electric, for
blasting.
Detonators, 1.4S........... UN0456........... .............. 1.4S............. 347........... 63(f), 63(g).. 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
electric for
blasting.
Detonators for 1.1B........... UN0073........... .............. 1.1B............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
ammunition.
Detonators for 1.2B........... UN0364........... .............. 1.2B............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
ammunition.
Detonators for 1.4B........... UN0365........... .............. 1.4B............. 103........... None.......... 62............ None.......... Forbidden..... 75 kg......... 05............ 25.
ammunition.
Detonators for 1.4S........... UN0366........... .............. 1.4S............. 347........... None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
ammunition.
Detonators, non- 1.1B........... UN0029........... .............. 1.1B............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
electric, for
blasting.
Detonators, non- 1.4B........... UN0267........... .............. 1.4B............. 103........... 63(f), 63(g).. 62............ None.......... Forbidden..... 75 kg......... 05............ 25.
electric, for
blasting.
Detonators, non- 1.4S........... UN0455........... .............. 1.4S............. 347........... 63(f), 63(g).. 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
electric, for
blasting.
* * * * * * *
Diazodinitrophenol 1.1A........... UN0074........... .............. 1.1A............. 111, 117...... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
, wetted with not
less than 40
percent water or
mixture of
alcohol and
water, by mass.
* * * * * * *
Diethyleneglycol 1.1D........... UN0075........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 21E.
dinitrate,
desensitized with
not less than 25
percent non-
volatile water-
insoluble
phlegmatizer, by
mass.
* * * * * * *
Dinitroglycoluril 1.1D........... UN0489........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
or Dingu.
* * * * * * *
Dinitrophenol, dry 1.1D........... UN0076........... .............. 1.1D, 6.1........ .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E.
or wetted with
less than 15
percent water, by
mass.
* * * * * * *
Dinitrophenolates 1.3C........... UN0077........... .............. 1.3C, 6.1........ .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E.
alkali metals,
dry or wetted
with less than 15
percent water, by
mass.
* * * * * * *
Dinitroresorcinol, 1.1D........... UN0078........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E.
dry or wetted
with less than 15
percent water, by
mass.
* * * * * * *
Dinitrosobenzene.. 1.3C........... UN0406........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
* * * * * * *
Dipicryl sulfide, 1.1D........... UN0401........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
dry or wetted
with less than 10
percent water, by
mass.
* * * * * * *
Explosive, 1.1D........... UN0081........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 19E, 21E.
blasting, type A.
Explosive, 1.1D........... UN0082........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 19E.
blasting, type B.
Explosive, 1.5D........... UN0331........... .............. 1.5D............. 105, 106...... None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25, 19E.
blasting, type B
or Agent
blasting, Type B.
Explosive, 1.1D........... UN0083........... .............. 1.1D............. 123........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 22E.
blasting, type C.
Explosive, 1.1D........... UN0084........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
blasting, type D.
[[Page 3820]]
Explosive, 1.1D........... UN0241........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 19E.
blasting, type E.
Explosive, 1.5D........... UN0332........... .............. 1.5D............. 105, 106...... None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25, 19E.
blasting, type E
or Agent
blasting, Type E.
* * * * * * *
Fire extinguishers 2.2............ UN1044........... .............. 2.2.............. 110........... 309........... 309........... None.......... 75 kg......... 150 kg........ A.............
containing
compressed or
liquefied gas.
* * * * * * *
Fireworks......... 1.1G........... UN0333........... .............. 1.1G............. 108........... None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
Fireworks......... 1.2G........... UN0334........... .............. 1.2G............. 108........... None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
Fireworks......... 1.3G........... UN0335........... .............. 1.3G............. 108........... None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
Fireworks......... 1.4G........... UN0336........... .............. 1.4G............. 108........... None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
Fireworks......... 1.4S........... UN0337........... .............. 1.4S............. 108........... None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
* * * * * * *
Flares, aerial.... 1.3G........... UN0093........... .............. 1.3G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 03............ 25.
Flares, aerial.... 1.4G........... UN0403........... .............. 1.4G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
Flares, aerial.... 1.4S........... UN0404........... .............. 1.4S............. .............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
Flares, aerial.... 1.1G........... UN0420........... .............. 1.1G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
Flares, aerial.... 1.2G........... UN0421........... .............. 1.2G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
* * * * * * *
Flares, surface... 1.3G........... UN0092........... .............. 1.3G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 03............ 25.
Flares, surface... 1.1G........... UN0418........... .............. 1.1G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
Flares, surface... 1.2G........... UN0419........... .............. 1.2G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
* * * * * * *
Flash powder...... 1.1G........... UN0094........... .............. 1.1G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
Flash powder...... 1.3G........... UN0305........... .............. 1.3G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
* * * * * * *
Fracturing 1.1D........... UN0099........... .............. 1.1D............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
devices,
explosive,
without
detonators for
oil wells.
* * * * * * *
Fuse, igniter 1.4G........... UN0103........... .............. 1.4G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
tubular metal
clad.
Fuse, non- 1.3G........... UN0101........... .............. 1.3G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
detonating
instantaneous or
quickmatch.
Fuse, safety...... 1.4S........... UN0105........... .............. 1.4S............. .............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
* * * * * * *
Fuzes, detonating. 1.1B........... UN0106........... .............. 1.1B............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
Fuzes, detonating. 1.2B........... UN0107........... .............. 1.2B............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
Fuzes, detonating. 1.4B........... UN0257........... .............. 1.4B............. 116........... None.......... 62............ None.......... Forbidden..... 75 kg......... 05............ 25.
Fuzes, detonating. 1.4S........... UN0367........... .............. 1.4S............. 116........... None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
Fuzes, detonating, 1.1D........... UN0408........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
with protective
features.
[[Page 3821]]
Fuzes, detonating, 1.2D........... UN0409........... .............. 1.2D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
with protective
features.
Fuzes, detonating, 1.4D........... UN0410........... .............. 1.4D............. 116........... None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
with protective
features.
Fuzes, igniting... 1.3G........... UN0316........... .............. 1.3G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
Fuzes, igniting... 1.4G........... UN0317........... .............. 1.4G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
Fuzes, igniting... 1.4S........... UN0368........... .............. 1.4S............. .............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
* * * * * * *
Grenades, hand or 1.1D........... UN0284........... .............. 1.1D............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
rifle, with
bursting charge.
Grenades, hand or 1.2D........... UN0285........... .............. 1.2D............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
rifle, with
bursting charge.
Grenades, hand or 1.1F........... UN0292........... .............. 1.1F............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
rifle, with
bursting charge.
Grenades, hand or 1.2F........... UN0293........... .............. 1.2F............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
rifle, with
bursting charge.
* * * * * * *
Grenades, 1.4S........... UN0110........... .............. 1.4S............. .............. .............. 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
practice, hand or
rifle.
Grenades, 1.3G........... UN0318........... .............. 1.3G............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
practice, hand or
rifle.
Grenades, 1.2G........... UN0372........... .............. 1.2G............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
practice, hand or
rifle.
Grenades practice, 1.4G........... UN0452........... .............. 1.4G............. .............. .............. 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
hand or rifle.
* * * * * * *
Guanyl 1.1A........... UN0113........... .............. 1.1A............. 111, 117...... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
nitrosaminoguanyl
idene hydrazine,
wetted with not
less than 30
percent water, by
mass.
* * * * * * *
Guanyl 1.1A........... UN0114........... .............. 1.1A............. 111, 117...... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
nitrosaminoguanyl
tetrazene, wetted
or Tetrazene,
wetted with not
less than 30
percent water or
mixture of
alcohol and
water, by mass.
* * * * * * *
Hexanitrodiphenyla 1.1D........... UN0079........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
mine or
Dipicrylamine or
Hexyl.
* * * * * * *
Hexanitrostilbene. 1.1D........... UN0392........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
* * * * * * *
Hexolite, or 1.1D........... UN0118........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
Hexotol dry or
wetted with less
than 15 percent
water, by mass.
* * * * * * *
Hexotonal......... 1.1D........... UN0393........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
* * * * * * *
Igniters.......... 1.1G........... UN0121........... .............. 1.1G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
Igniters.......... 1.2G........... UN0314........... .............. 1.2G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
Igniters.......... 1.3G........... UN0315........... .............. 1.3G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
Igniters.......... 1.4G........... UN0325........... .............. 1.4G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
Igniters.......... 1.4S........... UN0454........... .............. 1.4S............. .............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
[[Page 3822]]
* * * * * * *
D............ Jet perforating 1.1D........... NA0124........... .............. 1.1D............. 55, 56........ None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
guns, charged oil
well, with
detonator.
D............ Jet perforating 1.4D........... NA0494........... .............. 1.4D............. 55, 56........ None.......... 62............ None.......... Forbidden..... Forbidden..... 02............ 25.
guns, charged oil
well, with
detonator.
Jet perforating 1.4D........... UN0494........... .............. 1.4D............. 55, 114....... None.......... 62............ None.......... Forbidden..... 300 kg........ 02............ 25.
guns, charged,
oil well, without
detonator.
Jet perforating 1.1D........... UN0124........... .............. 1.1D............. 55............ None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
guns, charged oil
well, without
detonator.
* * * * * * *
Lead azide, wetted 1.1A........... UN0129........... .............. 1.1A............. 111, 117...... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
with not less
than 20 percent
water or mixture
of alcohol and
water, by mass.
* * * * * * *
Lead styphnate, 1.1A........... UN0130........... .............. 1.1A............. 111, 117...... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
wetted or Lead
trinitroresorcina
te, wetted with
not less than 20
percent water or
mixture of
alcohol and
water, by mass.
* * * * * * *
Lighters, fuse.... 1.4S........... UN0131........... .............. 1.4S............. .............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
* * * * * * *
Mannitol 1.1D........... UN0133........... .............. 1.1D............. 121........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
hexanitrate,
wetted or
Nitromannite,
wetted with not
less than 40
percent water, or
mixture of
alcohol and
water, by mass.
* * * * * * *
5-Mercaptotetrazol- 1.4C........... UN0448........... .............. 1.4C............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
1-acetic acid.
* * * * * * *
Mercury fulminate, 1.1A........... UN0135........... .............. 1.1A............. 111, 117...... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
wetted with not
less than 20
percent water, or
mixture of
alcohol and
water, by mass.
* * * * * * *
Mines with 1.1F........... UN0136........... .............. 1.1F............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
bursting charge.
Mines with 1.1D........... UN0137........... .............. 1.1D............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
bursting charge.
[[Page 3823]]
Mines with 1.2D........... UN0138........... .............. 1.2D............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
bursting charge.
Mines with 1.2F........... UN0294........... .............. 1.2F............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
bursting charge.
* * * * * * *
D............ Model rocket motor 1.4C........... NA0276........... .............. 1.4C............. 51............ None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
D............ Model rocket motor 1.4S........... NA0323........... .............. 1.4S............. 51............ None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
* * * * * * *
Nitro urea........ 1.1D........... UN0147........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
* * * * * * *
5- 1.1D........... UN0385........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
Nitrobenzotriazol.
* * * * * * *
Nitrocellulose, 1.1D........... UN0340........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 27E.
dry or wetted
with less than 25
percent water (or
alcohol), by mass.
* * * * * * *
Nitrocellulose, 1.3C........... UN0343........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
plasticized with
not less than 18
percent
plasticizing
substance, by
mass.
* * * * * * *
Nitrocellulose, 1.1D........... UN0341........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 27E.
unmodified or
plasticized with
less than 18
percent
plasticizing
substance, by
mass.
Nitrocellulose, 1.3C........... UN0342........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
wetted with not
less than 25
percent alcohol,
by mass.
* * * * * * *
Nitroglycerin, 1.1D........... UN0143........... .............. 1.1D, 6.1........ 125........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 21E.
desensitized with
not less than 40
percent non-
volatile water
insoluble
phlegmatizer, by
mass.
* * * * * * *
Nitroglycerin, 1.1D........... UN0144........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 21E.
solution in
alcohol, with
more than 1
percent but not
more than 10
percent
nitroglycerin.
* * * * * * *
Nitroguanidine or 1.1D........... UN0282........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
Picrite, dry or
wetted with less
than 20 percent
water, by mass.
* * * * * * *
Nitrostarch, dry 1.1D........... UN0146........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
or wetted with
less than 20
percent water, by
mass.
* * * * * * *
Nitrotriazolone or 1.1D........... UN0490........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
NTO.
[[Page 3824]]
* * * * * * *
Octolite or Octol, 1.1D........... UN0266........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
dry or wetted
with less than 15
percent water, by
mass.
* * * * * * *
G............ Organic peroxide 5.2............ UN3101........... .............. 5.2, 1........... 53............ 152........... 225........... None.......... Forbidden..... Forbidden..... D............. 12, 40, 52,
type B, liquid. 53.
G............ Organic peroxide 5.2............ UN3111........... .............. 5.2, 1........... 53............ None.......... 225........... None.......... Forbidden..... Forbidden..... D............. 2, 40, 52, 53.
type B, liquid,
temperature
controlled.
G............ Organic peroxide 5.2............ UN3102........... .............. 5.2, 1........... 53............ 152........... 225........... None.......... Forbidden..... Forbidden..... D............. 12, 40, 52,
type B, solid. 53.
G............ Organic peroxide 5.2............ UN3112........... .............. 5.2, 1........... 53............ None.......... 225........... None.......... Forbidden..... Forbidden..... D............. 2, 40, 52, 53.
type B, solid,
temperature
controlled.
G............ Organic peroxide 5.2............ UN3103........... .............. 5.2.............. .............. 152........... 225........... None.......... 5 L........... 10 L.......... D............. 12, 40, 52,
type C, liquid. 53.
G............ Organic peroxide 5.2............ UN3113........... .............. 5.2.............. .............. None.......... 225........... None.......... Forbidden..... Forbidden..... D............. 2, 40, 52, 53.
type C, liquid,
temperature
controlled.
G............ Organic peroxide 5.2............ UN3104........... .............. 5.2.............. .............. 152........... 225........... None.......... 5 kg.......... 10 kg......... D............. 12, 40, 52,
type C, solid. 53.
G............ Organic peroxide 5.2............ UN3114........... .............. 5.2.............. .............. None.......... 225........... None.......... Forbidden..... Forbidden..... D............. 2, 40, 52, 53.
type C, solid,
temperature
controlled.
G............ Organic peroxide 5.2............ UN3105........... .............. 5.2.............. .............. 152........... 225........... None.......... 5 L........... 10 L.......... D............. 12, 40, 52,
type D, liquid. 53.
G............ Organic peroxide 5.2............ UN3115........... .............. 5.2.............. .............. None.......... 225........... None.......... Forbidden..... Forbidden..... D............. 2, 40, 52, 53.
type D, liquid,
temperature
controlled.
G............ Organic peroxide 5.2............ UN3106........... .............. 5.2.............. .............. 152........... 225........... None.......... 5 kg.......... 10 kg......... D............. 12, 40, 52,
type D, solid. 53.
G............ Organic peroxide 5.2............ UN3116........... .............. 5.2.............. .............. None.......... 225........... None.......... Forbidden..... Forbidden..... D............. 2, 40, 52, 53.
type D, solid,
temperature
controlled.
G............ Organic peroxide 5.2............ UN3107........... .............. 5.2.............. .............. 152........... 225........... None.......... 10 L.......... 25 L.......... D............. 12, 40, 52,
type E, liquid. 53.
G............ Organic peroxide 5.2............ UN3117........... .............. 5.2.............. .............. None.......... 225........... None.......... Forbidden..... Forbidden..... D............. 2, 40, 52, 53.
type E, liquid,
temperature
controlled.
G............ Organic peroxide 5.2............ UN3108........... .............. 5.2.............. .............. 152........... 225........... None.......... 10 kg......... 25 kg......... D............. 12, 40, 52,
type E, solid. 53.
G............ Organic peroxide 5.2............ UN3118........... .............. 5.2.............. .............. None.......... 225........... None.......... Forbidden..... Forbidden..... D............. 2, 40, 52, 53.
type E, solid,
temperature
controlled.
G............ Organic peroxide 5.2............ UN3109........... .............. 5.2.............. IP5........... 152........... 225........... 225........... 10 L.......... 25 L.......... D............. 12, 40, 52,
type F, liquid. 53.
G............ Organic peroxide 5.2............ UN3119........... .............. 5.2.............. IP5........... None.......... 225........... 225........... Forbidden..... Forbidden..... D............. 2, 40, 52, 53.
type F, liquid,
temperature
controlled.
G............ Organic peroxide 5.2............ UN3110........... .............. 5.2.............. TP33.......... 152........... 225........... 225........... 10 kg......... 25 kg......... D............. 12, 40, 52,
type F, solid. 53.
[[Page 3825]]
G............ Organic peroxide 5.2............ UN3120........... .............. 5.2.............. TP33.......... None.......... 225........... 225........... Forbidden..... Forbidden..... D............. 2, 52, 53.
type F, solid,
temperature
controlled.
* * * * * * *
G............ Oxidizing solid, 5.1............ UN3085........... I............. 5.1, 8........... 62............ None.......... 211........... 242........... 1 kg.......... 15 kg......... D............. 13, 56, 58,
corrosive, n.o.s. 106, 138.
II............ 5.1, 8........... 62, IB6, IP2, 152........... 212........... 242........... 5 kg.......... 25 kg......... B............. 13, 34, 56,
T3, TP33. 58, 106, 138.
III........... 5.1, 8........... 62, IB8, IP3, 152........... 213........... 240........... 25 kg......... 100 kg........ B............. 13, 34, 56,
T1, TP33. 58, 106, 138.
* * * * * * *
Pentaerythrite 1.1D........... UN0411........... .............. 1.1D............. 120........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
tetranitrate or
Pentaerythritol
tetranitrate or
PETN, with not
less than 7
percent wax by
mass.
Pentaerythrite 1.1D........... UN0150........... .............. 1.1D............. 121........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
tetranitrate,
wetted or
Pentaerythritol
tetranitrate,
wetted, or PETN,
wetted with not
less than 25
percent water, by
mass, or
Pentaerythrite
tetranitrate, or
Pentaerythritol
tetranitrate or
PETN,
desensitized with
not less than 15
percent
phlegmatizer by
mass.
* * * * * * *
Pentolite, dry or 1.1D........... UN0151........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
wetted with less
than 15 percent
water, by mass.
* * * * * * *
Powder cake, 1.1C........... UN0433........... .............. 1.1C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
wetted or Powder
paste, wetted
with not less
than 17 percent
alcohol by mass.
Powder cake, 1.3C........... UN0159........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
wetted or Powder
paste, wetted
with not less
than 25 percent
water, by mass.
* * * * * * *
Powder, smokeless. 1.1C........... UN0160........... .............. 1.1C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 26E.
Powder, smokeless. 1.3C........... UN0161........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 26E.
Powder, smokeless. 1.4C........... UN0509........... .............. 1.4C............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
* * * * * * *
Primers, cap type. 1.4S........... UN0044........... .............. None............. .............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
Primers, cap type. 1.1B........... UN0377........... .............. 1.1B............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
Primers, cap type. 1.4B........... UN0378........... .............. 1.4B............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 05............ 25.
* * * * * * *
Primers, tubular.. 1.3G........... UN0319........... .............. 1.3G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
Primers, tubular.. 1.4G........... UN0320........... .............. 1.4G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
Primers, tubular.. 1.4S........... UN0376........... .............. None............. .............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
* * * * * * *
Projectiles, inert 1.4S........... UN0345........... .............. 1.4S............. .............. .............. 62............ 62............ 25 kg......... 100 kg........ 01............ 25.
with tracer.
Projectiles, 1.3G........... UN0424........... .............. 1.3G............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25.
inert, with
tracer.
[[Page 3826]]
Projectiles, 1.4G........... UN0425........... .............. 1.4G............. .............. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25.
inert, with
tracer.
Projectiles, with 1.2D........... UN0346........... .............. 1.2D............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
burster or
expelling charge.
Projectiles, with 1.4D........... UN0347........... .............. 1.4D............. .............. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25.
burster or
expelling charge.
Projectiles, with 1.2F........... UN0426........... .............. 1.2F............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
burster or
expelling charge.
Projectiles, with 1.4F........... UN0427........... .............. 1.4F............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
burster or
expelling charge.
Projectiles, with 1.2G........... UN0434........... .............. 1.2G............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25.
burster or
expelling charge.
Projectiles, with 1.4G........... UN0435........... .............. 1.4G............. .............. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25.
burster or
expelling charge.
Projectiles, with 1.1F........... UN0167........... .............. 1.1F............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
bursting charge.
Projectiles, with 1.1D........... UN0168........... .............. 1.1D............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
bursting charge.
Projectiles, with 1.2D........... UN0169........... .............. 1.2D............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
bursting charge.
Projectiles, with 1.2F........... UN0324........... .............. 1.2F............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
bursting charge.
Projectiles, with 1.4D........... UN0344........... .............. 1.4D............. .............. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25.
bursting charge.
* * * * * * *
Propellant, liquid 1.3C........... UN0495........... .............. 1.3C............. 37............ None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
Propellant, liquid 1.1C........... UN0497........... .............. 1.1C............. 37............ None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
Propellant, solid. 1.1C........... UN0498........... .............. 1.1C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 26E.
Propellant, solid. 1.3C........... UN0499........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 26E.
Propellant, solid. 1.4C........... UN0501........... .............. 1.4C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 02............ 25.
* * * * * * *
RDX and HMX 1.1D........... UN0391........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
mixtures, wetted
with not less
than 15 percent
water by mass or
RDX and HMX
mixtures,
desensitized with
not less than 10
percent
phlegmatizer by
mass.
* * * * * * *
Release devices, 1.4S........... UN0173........... .............. 1.4S............. .............. None.......... 62............ 62............ 25 kg......... 100 kg........ 01............ 25.
explosive.
* * * * * * *
Rivets, explosive. 1.4S........... UN0174........... .............. 1.4S............. .............. None.......... 62............ 62............ 25 kg......... 100 kg........ 01............ 25.
* * * * * * *
Rocket motors..... 1.3C........... UN0186........... .............. 1.3C............. 109........... None.......... 62............ 62............ Forbidden..... 220 kg........ 04............ 25.
Rocket motors..... 1.1C........... UN0280........... .............. 1.1C............. 109........... None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
Rocket motors..... 1.2C........... UN0281........... .............. 1.2C............. 109........... None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
Rocket motors, 1.2J........... UN0395........... .............. 1.2J............. 109........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 23E.
liquid fueled.
Rocket motors, 1.3J........... UN0396........... .............. 1.3J............. 109........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 23E.
liquid fueled.
[[Page 3827]]
Rocket motors with 1.3L........... UN0250........... .............. 1.3L............. 109........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E.
hypergolic
liquids with or
without an
expelling charge.
Rocket motors with 1.2L........... UN0322........... .............. 1.2L............. 109........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E.
hypergolic
liquids with or
without an
expelling charge.
Rockets, line- 1.2G........... UN0238........... .............. 1.2G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
throwing.
Rockets, line- 1.3G........... UN0240........... .............. 1.3G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 03............ 25.
throwing.
Rockets, line- 1.4G........... UN0453........... .............. 1.4G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
throwing.
Rockets, liquid 1.1J........... UN0397........... .............. 1.1J............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 23E.
fueled with
bursting charge.
Rockets, liquid 1.2J........... UN0398........... .............. 1.2J............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 23E.
fueled with
bursting charge.
Rockets, with 1.1F........... UN0180........... .............. 1.1F............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
bursting charge.
Rockets, with 1.1E........... UN0181........... .............. 1.1E............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
bursting charge.
Rockets, with 1.2E........... UN0182........... .............. 1.2E............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
bursting charge.
Rockets, with 1.2F........... UN0295........... .............. 1.2F............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
bursting charge.
Rockets, with 1.2C........... UN0436........... .............. 1.2C............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
expelling charge.
Rockets, with 1.3C........... UN0437........... .............. 1.3C............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
expelling charge.
Rockets, with 1.4C........... UN0438........... .............. 1.4C............. .............. None.......... 62............ 62............ Forbidden..... 75 kg......... 02............ 25.
expelling charge.
Rockets, with 1.3C........... UN0183........... .............. 1.3C............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
inert head.
* * * * * * *
G............ Self-reactive 4.1............ UN3221........... .............. 4.1.............. 53............ 151........... 224........... None.......... Forbidden..... Forbidden..... D............. 52, 53.
liquid type B.
G............ Self-reactive 4.1............ UN3231........... .............. 4.1.............. 53............ None.......... 224........... None.......... Forbidden..... Forbidden..... D............. 2, 52, 53.
liquid type B,
temperature
controlled.
G............ Self-reactive 4.1............ UN3223........... .............. 4.1.............. .............. 151........... 224........... None.......... 5 L........... 10 L.......... D............. 52, 53.
liquid type C.
G............ Self-reactive 4.1............ UN3233........... .............. 4.1.............. .............. None.......... 224........... None.......... Forbidden..... Forbidden..... D............. 2, 52, 53.
liquid type C,
temperature
controlled.
G............ Self-reactive 4.1............ UN3225........... .............. 4.1.............. .............. 151........... 224........... None.......... 5 L........... 10 L.......... D............. 52, 53.
liquid type D.
G............ Self-reactive 4.1............ UN3235........... .............. 4.1.............. .............. None.......... 224........... None.......... Forbidden..... Forbidden..... D............. 2, 52, 53.
liquid type D,
temperature
controlled.
G............ Self-reactive 4.1............ UN3227........... .............. 4.1.............. .............. 151........... 224........... None.......... 10 L.......... 25 L.......... D............. 52, 53.
liquid type E.
G............ Self-reactive 4.1............ UN3237........... .............. 4.1.............. .............. None.......... 224........... None.......... Forbidden..... Forbidden..... D............. 2, 52, 53.
liquid type E,
temperature
controlled.
G............ Self-reactive 4.1............ UN3229........... .............. 4.1.............. .............. 151........... 224........... None.......... 10 L.......... 25 L.......... D............. 52, 53.
liquid type F.
G............ Self-reactive 4.1............ UN3239........... .............. 4.1.............. .............. None.......... 224........... None.......... Forbidden..... Forbidden..... D............. 2, 52, 53.
liquid type F,
temperature
controlled.
G............ Self-reactive 4.1............ UN3222........... .............. 4.1.............. 53............ 151........... 224........... None.......... Forbidden..... Forbidden..... D............. 52, 53.
solid type B.
G............ Self-reactive 4.1............ UN3232........... .............. 4.1.............. 53............ None.......... 224........... None.......... Forbidden..... Forbidden..... D............. 2, 52, 53.
solid type B,
temperature
controlled.
G............ Self-reactive 4.1............ UN3224........... .............. 4.1.............. .............. None.......... 224........... None.......... 5 kg.......... 10 kg......... D............. 52, 53.
solid type C.
G............ Self-reactive 4.1............ UN3234........... .............. 4.1.............. .............. None.......... 224........... None.......... Forbidden..... Forbidden..... D............. 2, 52, 53.
solid type C,
temperature
controlled.
G............ Self-reactive 4.1............ UN3226........... .............. 4.1.............. .............. 151........... 224........... None.......... 5 kg.......... 10 kg......... D............. 52, 53.
solid type D.
G............ Self-reactive 4.1............ UN3236........... .............. 4.1.............. .............. None.......... 224........... None.......... Forbidden..... Forbidden..... D............. 2, 52, 53.
solid type D,
temperature
controlled.
G............ Self-reactive 4.1............ UN3228........... .............. 4.1.............. .............. 151........... 224........... None.......... 10 kg......... 25 kg......... D............. 52, 53.
solid type E.
G............ Self-reactive 4.1............ UN3238........... .............. 4.1.............. .............. None.......... 224........... None.......... Forbidden..... Forbidden..... D............. 2, 52, 53.
solid type E,
temperature
controlled.
G............ Self-reactive 4.1............ UN3230........... .............. 4.1.............. .............. 151........... 224........... None.......... 10 kg......... 25 kg......... D............. 52, 53.
solid type F.
G............ Self-reactive 4.1............ UN3240........... .............. 4.1.............. .............. None.......... 224........... None.......... Forbidden..... Forbidden..... D............. 2, 52, 53.
solid type F,
temperature
controlled.
* * * * * * *
Signal devices, 1.4G........... UN0191........... .............. 1.4G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
hand.
Signal devices, 1.4S........... UN0373........... .............. 1.4S............. .............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
hand.
[[Page 3828]]
Signals, distress, 1.1G........... UN0194........... .............. 1.1G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
ship.
Signals, distress, 1.3G........... UN0195........... .............. 1.3G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 03............ 25.
ship.
* * * * * * *
Signals, railway 1.1G........... UN0192........... .............. 1.1G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
track, explosive.
Signals, railway 1.4S........... UN0193........... .............. 1.4S............. .............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
track, explosive.
* * * * * * *
Signals, smoke.... 1.1G........... UN0196........... .............. 1.1G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
Signals, smoke.... 1.4G........... UN0197........... .............. 1.4G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
Signals, smoke.... 1.2G........... UN0313........... .............. 1.2G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
Signals, smoke.... 1.3G........... UN0487........... .............. 1.3G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
* * * * * * *
Sodium dinitro-o- 1.3C........... UN0234........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E.
cresolate, dry or
wetted with less
than 15 percent
water, by mass.
* * * * * * *
Sodium picramate, 1.3C........... UN0235........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E.
dry or wetted
with less than 20
percent water, by
mass.
* * * * * * *
Sounding devices, 1.2F........... UN0204........... .............. 1.2F............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 05............ 25.
explosive.
Sounding devices, 1.1F........... UN0296........... .............. 1.1F............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 05............ 25.
explosive.
Sounding devices, 1.1D........... UN0374........... .............. 1.1D............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
explosive.
Sounding devices, 1.2D........... UN0375........... .............. 1.2D............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
explosive.
* * * * * * *
G............ Substances, 1.1L........... UN0357........... .............. 1.1L............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E.
explosive, n.o.s.
G............ Substances, 1.2L........... UN0358........... .............. 1.2L............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E.
explosive, n.o.s.
G............ Substances, 1.3L........... UN0359........... .............. 1.3L............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E.
explosive, n.o.s.
G............ Substances, 1.1A........... UN0473........... .............. 1.1A............. 101, 111...... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
explosive, n.o.s.
G............ Substances, 1.1C........... UN0474........... .............. 1.1C............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
explosive, n.o.s.
G............ Substances, 1.1D........... UN0475........... .............. 1.1D............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
explosive, n.o.s.
G............ Substances, 1.1G........... UN0476........... .............. 1.1G............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
explosive, n.o.s.
G............ Substances, 1.3C........... UN0477........... .............. 1.3C............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
explosive, n.o.s.
G............ Substances, 1.3G........... UN0478........... .............. 1.3G............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
explosive, n.o.s.
[[Page 3829]]
G............ Substances, 1.4C........... UN0479........... .............. 1.4C............. 101........... None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
explosive, n.o.s.
G............ Substances, 1.4D........... UN0480........... .............. 1.4D............. 101........... None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
explosive, n.o.s.
G............ Substances, 1.4S........... UN0481........... .............. 1.4S............. 101........... None.......... 62............ None.......... 25 kg......... 75 kg......... 01............ 25.
explosive, n.o.s.
G............ Substances, 1.4G........... UN0485........... .............. 1.4G............. 101........... None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
explosive, n.o.s.
G............ Substances, 1.5D........... UN0482........... .............. 1.5D............. 101........... None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
explosive, very
insensitive,
n.o.s or
Substances, EVI,
n.o.s.
* * * * * * *
Tetranitroaniline. 1.1D........... UN0207........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
* * * * * * *
Tetrazol-1-acetic 1.4C........... UN0407........... .............. 1.4C............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
acid.
* * * * * * *
Torpedoes, liquid 1.3J........... UN0450........... .............. 1.3J............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 23E.
fueled, with
inert head.
Torpedoes, liquid 1.1J........... UN0449........... .............. 1.1J............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 23E.
fueled, with or
without bursting
charge.
Torpedoes with 1.1E........... UN0329........... .............. 1.1E............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
bursting charge.
Torpedoes with 1.1F........... UN0330........... .............. 1.1F............. .............. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
bursting charge.
Torpedoes with 1.1D........... UN0451........... .............. 1.1D............. .............. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
bursting charge.
* * * * * * *
D............ Toy Caps.......... 1.4S........... NA0337........... .............. 1.4S............. .............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25.
Tracers for 1.3G........... UN0212........... .............. 1.3G............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25.
ammunition.
Tracers for 1.4G........... UN0306........... .............. 1.4G............. .............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25.
ammunition.
* * * * * * *
Trinitro-m-cresol. 1.1D........... UN0216........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E.
* * * * * * *
Trinitroaniline or 1.1D........... UN0153........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
Picramide.
Trinitroanisole... 1.1D........... UN0213........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
* * * * * * *
Trinitrobenzene, 1.1D........... UN0214........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
dry or wetted
with less than 30
percent water, by
mass.
* * * * * * *
Trinitrobenzenesul 1.1D........... UN0386........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E.
fonic acid.
Trinitrobenzoic 1.1D........... UN0215........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
acid, dry or
wetted with less
than 30 percent
water, by mass.
* * * * * * *
Trinitrochlorobenz 1.1D........... UN0155........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
ene or Picryl
chloride.
* * * * * * *
Trinitrofluorenone 1.1D........... UN0387........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
* * * * * * *
Trinitronaphthalen 1.1D........... UN0217........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
e.
Trinitrophenetole. 1.1D........... UN0218........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
[[Page 3830]]
Trinitrophenol 4.1............ UN3364........... I............. 4.1.............. 23, A8, A19, None.......... 211........... None.......... 0.5 kg........ 0.5 kg........ E............. 36.
(picric acid), N41, N84.
wetted, with not
less than 10
percent water by
mass.
Trinitrophenol or 1.1D........... UN0154........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E.
Picric acid, dry
or wetted with
less than 30
percent water, by
mass.
Trinitrophenol, 4.1............ UN1344........... I............. 4.1.............. 162, A8, A19, None.......... 211........... None.......... 1 kg.......... 15 kg......... E............. 28, 36.
wetted with not N41.
less than 30
percent water, by
mass.
* * * * * * *
Trinitrophenylmeth 1.1D........... UN0208........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
ylnitramine or
Tetryl.
Trinitroresorcinol 1.1D........... UN0219........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E.
or Styphnic acid,
dry or wetted
with less than 20
percent water, or
mixture of
alcohol and
water, by mass.
Trinitroresorcinol 1.1D........... UN0394........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E.
, wetted or
Styphnic acid,
wetted with not
less than 20
percent water, or
mixture of
alcohol and water
by mass.
* * * * * * *
Trinitrotoluene 1.1D........... UN0388........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
and
Trinitrobenzene
mixtures or TNT
and
trinitrobenzene
mixtures or TNT
and
hexanitrostilbene
mixtures or
Trinitrotoluene
and
hexanitrostilnene
mixtures.
Trinitrotoluene 1.1D........... UN0389........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
mixtures
containing
Trinitrobenzene
and
Hexanitrostilbene
or TNT mixtures
containing
trinitrobenzene
and
hexanitrostilbene.
Trinitrotoluene or 1.1D........... UN0209........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
TNT, dry or
wetted with less
than 30 percent
water, by mass.
* * * * * * *
Tritonal.......... 1.1D........... UN0390........... .............. 1.1D............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
[[Page 3831]]
* * * * * * *
Urea nitrate, dry 1.1D........... UN0220........... .............. 1.1D............. 119........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25.
or wetted with
less than 20
percent water, by
mass.
* * * * * * *
Warheads, rocket 1.4D........... UN0370........... .............. 1.4D............. .............. None.......... 62............ 62............ Forbidden..... 75 kg......... 02............ 25.
with burster or
expelling charge.
Warheads, rocket 1.4F........... UN0371........... .............. 1.4F............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
with burster or
expelling charge.
Warheads, rocket 1.1D........... UN0286........... .............. 1.1D............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
with bursting
charge.
Warheads, rocket 1.2D........... UN0287........... .............. 1.2D............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
with bursting
charge.
Warheads, rocket 1.1F........... UN0369........... .............. 1.1F............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25.
with bursting
charge.
Warheads, torpedo 1.1D........... UN0221........... .............. 1.1D............. .............. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25.
with bursting
charge.
* * * * * * *
I............ White asbestos 9.............. UN2590........... III........... 9................ 156, IB8, IP2, 155........... 216........... 216........... 200 kg........ 200 kg........ A............. 34, 40.
(chrysotile, IP3, T1, TP33.
actinolite,
anthophyllite,
tremolite).
* * * * * * *
Zirconium 1.3C........... UN0236........... .............. 1.3C............. .............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E.
picramate, dry or
wetted with less
than 20 percent
water, by mass.
* * * * * * *
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[[Page 3832]]
* * * * *
0
10. In Sec. 172.102, in paragraph (c)(1) Special Provision 136 is
revised to read as follows:
Sec. 172.102 Special provisions.
* * * * *
(c) * * *
(1) * * *
136 This entry only applies to machinery and apparatus containing
hazardous materials as an integral element of the machinery or
apparatus. It may not be used to describe machinery or apparatus for
which a proper shipping name exists in the Sec. 172.101 Table. Except
when approved by the Associate Administrator, machinery or apparatus
may only contain hazardous materials for which exceptions are
referenced in Column (8) of the Sec. 172.101 Table and are provided in
part 173, subparts D and G, of this subchapter. Hazardous materials
shipped under this entry are excepted from the labeling requirements of
this subchapter unless offered for transportation or transported by
aircraft and are not subject to the placarding requirements of part
172, subpart F, of this subchapter. Orientation markings as described
in Sec. 172.312(a)(2) are required when liquid hazardous materials may
escape due to incorrect orientation. The machinery or apparatus, if
unpackaged, or the packaging in which it is contained shall be marked
``Dangerous goods in machinery'' or ``Dangerous goods in apparatus,''
as appropriate, with the identification number UN3363. For
transportation by aircraft, machinery or apparatus may not contain any
material forbidden for transportation by passenger or cargo aircraft.
The Associate Administrator may except from the requirements of this
subchapter equipment, machinery and apparatus provided:
a. It is shown that it does not pose a significant risk in
transportation;
b. The quantities of hazardous materials do not exceed those
specified in Sec. 173.4a of this subchapter; and
c. The equipment, machinery or apparatus conforms with Sec.
173.222 of this subchapter.
* * * * *
0
11. In Sec. 172.201, paragraph (d) is revised to read as follows:
Sec. 172.201 Preparation and retention of shipping papers.
* * * * *
(d) Emergency response telephone number. Except as provided in
Sec. 172.604(d), a shipping paper must contain an emergency response
telephone number and, if utilizing an emergency response information
telephone number service provider, identify the person (by name or
contract number) who has a contractual agreement with the service
provider, as prescribed in subpart G of this part.
* * * * *
0
12. In Sec. 172.301, paragraph (f) is revised to read as follows:
Sec. 172.301 General marking requirements for non-bulk packagings.
* * * * *
(f) NON-ODORIZED marking on cylinders containing LPG. No person may
offer for transportation or transport a specification cylinder, except
a Specification 2P or 2Q container or a Specification 39 cylinder,
containing unodorized liquefied petroleum gas (LPG) unless it is
legibly marked NON-ODORIZED or NOT ODORIZED in letters not less than
6.3 mm (0.25 inches) in height near the marked proper shipping name
required by paragraph (a) of this section. The NON-ODORIZED or NOT
ODORIZED marking may appear on a cylinder used for both unodorized and
odorized LPG.
0
13. In 173.326, paragraph (d) is revised to read as follows:
Sec. 172.326 Portable tanks.
* * * * *
(d) NON-ODORIZED marking on portable containing LPG. No person may
offer for transportation or transport a portable tank containing
unodorized liquefied petroleum gas (LPG) as authorized in Sec.
173.315(b)(1) unless it is legibly marked NON-ODORIZED or NOT ODORIZED
on two opposing sides near the marked proper shipping name required by
paragraph (a) of this section, or near the placards. The NON-ODORIZED
or NOT ODORIZED marking may appear on a portable tank used for both
unodorized and odorized LPG.
0
14. In 173.328, paragraph (e) is revised to read as follows:
Sec. 172.328 Cargo tanks.
* * * * *
(e) NON-ODORIZED marking on cargo tanks containing LPG. No person
may offer for transportation or transport a cargo tank containing
unodorized liquefied petroleum gas (LPG) as authorized in Sec.
173.315(b)(1) unless it is legibly marked NON-ODORIZED or NOT ODORIZED
on two opposing sides near the marked proper shipping name as specified
in paragraph (b)(1) of this section, or near the placards. The NON-
ODORIZED or NOT ODORIZED marking may appear on a cargo tank used for
both unodorized and odorized LPG.
0
15. In 173.330, paragraph (c) is revised to read as follows:
Sec. 172.330 Tank cars and multi-unit tank car tanks.
* * * * *
(c) No person may offer for transportation or transport a tank car
or multi-unit tank car tank containing unodorized liquefied petroleum
gas (LPG) unless it is legibly marked NON-ODORIZED or NOT ODORIZED on
two opposing sides near the marked proper shipping name required by
paragraphs (a)(1) and (a)(2) of this section, or near the placards. The
NON-ODORIZED or NOT ODORIZED marking may appear on a tank car or multi-
unit tank car tank used for both unodorized and odorized LPG.
0
16. In Sec. 172.406, paragraph (d) is revised to read as follows:
Sec. 172.406 Placement of labels.
* * * * *
(d) Contrast with background. Each label must be printed on or
affixed to a background color contrasting to the color specification of
the label as required by Sec. 172.407(d)(1) of this part, or must have
a dotted or solid line outer border, to enhance the visibility of the
label. However, labels created with a dotted or solid line outer border
need not be limited to only backgrounds of non-contrasting color.
* * * * *
0
17. In Sec. 172.407, paragraph (d)(4)(ii) is revised to read as
follows:
Sec. 172.407 Label specifications.
* * * * *
(d) * * *
(4) * * *
(ii) Color charts conforming to appendix A to this part are on
display at the Standards and Rulemaking Division, Pipeline and
Hazardous Materials Safety Administration, U.S. Department of
Transportation, East Building, 1200 New Jersey Avenue SE., Washington,
DC 20590-0001.
* * * * *
0
18. In Sec. 172.514, paragraph (c)(4) is revised to read as follows:
Sec. 172.514 Bulk Packagings.
* * * * *
(c) * * *
(4) For an IBC labeled in accordance with subpart E of this part,
instead of being placarded, the IBC may display the proper shipping
name and UN identification number markings in accordance with the size
requirements of Sec. 172.301(a)(1) in place of the UN number on an
orange panel, placard or white square-on-point configuration as
prescribed in Sec. 172.336(b); and
* * * * *
0
19. In 172.604, paragraph (a) is revised to read as follows:
[[Page 3833]]
Sec. 172.604 Emergency response telephone number.
(a) A person who offers a hazardous material for transportation
must provide a numeric emergency response telephone number, including
the area code, for use in an emergency involving the hazardous
material. For telephone numbers outside the United States, the
international access code or the ``+'' (plus) sign, country code, and
city code, as appropriate, that are needed to complete the call must be
included. The telephone number must be--
* * * * *
PART 173--SHIPPERS--GENERAL REQUIREMENTS FOR SHIPMENTS AND
PACKAGINGS
0
20. The authority citation for part 173 continues to read as follows:
Authority: 49 U.S.C. 5101-5128, 44701; 49 CFR 1.81 and 1.97.
0
21. In Sec. 173.4a, paragraph (a) introductory text is revised to read
as follows:
Sec. 173.4a Excepted quantities.
(a) Excepted quantities of materials, other than articles, are not
subject to requirements of this subchapter except for:
* * * * *
0
22. In Sec. 173.21, paragraph (e) is revised to read as follows:
Sec. 173.21 Forbidden materials and packages.
* * * * *
(e) A material in the same packaging, freight container, overpack,
or transport vehicle with another material, the mixing of which is
likely to cause a dangerous evolution of heat, produce flammable or
poisonous gases or vapors, or produce corrosive materials.
* * * * *
0
23. In Sec. 173.24a, paragraph (c)(1)(iv) is revised to read as
follows:
Sec. 173.24a Additional general requirements for non-bulk packagings
and packages.
* * * * *
(c) * * *
(1) * * *
(iv) For transportation by aircraft, the total net quantity does
not exceed the lowest permitted maximum net quantity per package as
shown in Column (9a) or (9b), as appropriate, of the Sec. 172.101
Table. The permitted maximum net quantity must be calculated in
kilograms if a package contains both a liquid and a solid. These
requirements do not apply to limited quantity hazardous materials
packaged in accordance with Sec. 173.27(f)(2) of this part.
* * * * *
0
24. In Sec. 173.27, paragraph (f)(2)(i) is revised to read as follows:
Sec. 173.27 General requirements for transportation by aircraft.
* * * * *
(f) * * *
(2) * * *
(i) Unless otherwise specified in this part, or in subpart C of
part 171 of this subchapter, when a limited quantity of hazardous
material packaged in a combination packaging is intended for
transportation aboard an aircraft, the inner and outer packagings must
conform to the quantity limitations set forth in Table 3 of this
paragraph. Materials and articles must be authorized for transportation
aboard a passenger-carrying aircraft (see Column (9A) of the Sec.
172.101 Hazardous Materials Table of this subchapter). Not all
unauthorized materials or articles may be indicated in this table. For
mixed content packages of limited quantity material, the total net
quantity must not exceed the lowest permitted maximum net quantity (for
each of the hazard classes or divisions represented in the package) per
outer package set forth in Table 3 of this paragraph. The permitted
maximum net quantity must be calculated in kilograms for a package that
contains both a solid and a liquid. Unless otherwise excepted, packages
must be marked and labeled in accordance with this section and any
additional requirements in subparts D and E, respectively, of part 172
of this subchapter. Materials or articles not authorized as limited
quantity by aircraft are:
* * * * *
0
25. In Sec. 173.150, paragraphs (f)(3)(ix) and (x) are revised and
paragraph (f)(3)(xi) is added as follows:
Sec. 173.150 Exceptions for Class 3 (flammable and combustible
liquids).
* * * * *
(f) * * *
(3) * * *
(ix) The training requirements of subpart H of part 172 of this
subchapter;
(x) Emergency response information requirements of subpart G of
part 172; and
(xi) For bulk packagings only, registration requirements of subpart
G of part 107 of this subchapter.
* * * * *
0
26. In 173.158, paragraph (e) is revised to read as follows:
Sec. 173.158 Nitric acid.
* * * * *
(e) Nitric acid of less than 90 percent concentration, when offered
for transportation or transported by rail, highway, or water may be
packaged in 4A, 4B, or 4N metal boxes, 4G fiberboard boxes or 4C1, 4C2,
4D or 4F wooden boxes with inside glass packagings of not over 2.5 L
(0.66 gallon) capacity each. When placed in wooden or fiberboard outer
packagings, the glass inner packagings must be packed in tightly-
closed, non-reactive intermediate packagings, cushioned with a non-
reactive absorbent material.
* * * * *
0
27. In Sec. 173.159, paragraph (j) is added as follows:
Sec. 173.159 Batteries, wet.
* * * * *
(j) Damaged electric storage batteries incapable of retaining
battery fluid inside the outer casing during transportation may be
transported by highway or rail provided the batteries are transported
in non-bulk packaging, meet the requirements of paragraph (a) of this
section, and are prepared for transport under one or more of the
following conditions:
(1) Drain the battery of fluid to eliminate the potential for
leakage during transportation;
(2) Individually pack the battery in a leakproof intermediate
package with sufficient non-reactive absorbent material capable of
absorbing the release of any electrolyte;
(3) Place the intermediate packaging in a leakproof outer packaging
that conforms to the general packaging requirements of subpart B of
this part; or,
(4) Pack the battery in a salvage packaging in accordance with the
provisions of Sec. 173.3(c) of this part.
0
28. In Sec. 173.166, paragraph (e)(6) introductory text is revised to
read as follows:
Sec. 173.166 Air bag inflators, air bag modules and seat-belt
pretensioners.
* * * * *
(e) * * *
(6) Devices from or for a motor vehicle. When removed from or
having been intended to be used in a motor vehicle, a serviceable air
bag inflator, air bag module, or seat-belt pretensioner of Class 9
(UN3268) that was manufactured as required for use in the United States
and is to be offered for domestic transportation by highway or cargo
vessel to a recycling or waste disposal facility may be offered for
transportation and transported in the following authorized packaging:
* * * * *
[[Page 3834]]
0
29. In Sec. 173.170, paragraph (b) is revised to read as follows:
Sec. 173.170 Black powder for small arms.
* * * * *
(b) The total quantity of black powder in one transport vehicle or
freight container may not exceed 45.4 kg (100 pounds) net mass. No more
than four freight containers may be on board one cargo vessel;
* * * * *
0
30. In Sec. 173.171, paragraph (b)(1) is revised to read as follows:
Sec. 173.171 Smokeless powder for small arms.
* * * * *
(b) * * *
(1) One transport vehicle or cargo-only aircraft; or
* * * * *
0
31. In Sec. 173.199, paragraph (a)(4) is revised to read as follows:
Sec. 173.199 Category B infectious substances.
(a) * * *
(4) The completed package must be designed, constructed,
maintained, filled, its contents limited, and closed so that under
conditions normally encountered in transportation, including removal
from a pallet or overpack for subsequent handling, there will be no
release of hazardous material into the environment. Package
effectiveness must not be substantially reduced for minimum and maximum
temperatures, changes in humidity and pressure, and shocks, loadings
and vibrations normally encountered during transportation. The
packaging must be capable of successfully passing the drop test in
Sec. 178.609(d) of this subchapter at a drop height of at least 1.2
meters (3.9 feet). Following the drop test, there must be no leakage
from the primary receptacle, which must remain protected by absorbent
material, when required, in the secondary packaging. At least one
surface of the outer packaging must have a minimum dimension of 100 mm
by 100 mm (3.9 inches).
* * * * *
0
32. In Sec. 173.216, paragraph (c)(1) is revised to read as follows:
Sec. 173.216 Asbestos, blue, brown or white.
* * * * *
(c) * * *
(1) Rigid, leaktight packagings,, such as metal, plastic or fiber
drums, portable tanks, hopper-type rail cars, hopper-type motor
vehicles or additional bulk packagings authorized in Sec. 173.240;
* * * * *
0
33. In Sec. 173.225, the table in paragraph (d)(4) is revised to read
as follows:
Sec. 173.225 Packaging requirements and other provisions for organic
peroxides.
* * * * *
(d) * * *
(4) The maximum quantity per packaging or package for Packing
Methods OP1-OP8 must be as follows:
Maximum Quantity per Packaging/Package
[For packing methods OP1 to OP8]
--------------------------------------------------------------------------------------------------------------------------------------------------------
Packing method
Maximum quantity ---------------------------------------------------------------------------------------
OP1 OP2 \1\ OP3 OP4 \1\ OP5 OP6 OP7 OP8
--------------------------------------------------------------------------------------------------------------------------------------------------------
Solids and combination packagings (liquid and solid) (kg)....... 0.5 0.5/10 5 5/25 25 50 50 \2\ 400
Liquids (L)..................................................... 0.5 ......... 5 ......... 30 60 60 \3\ 225
--------------------------------------------------------------------------------------------------------------------------------------------------------
\1\ If two values are given, the first applies to the maximum net mass per inner packaging and the second to the maximum net mass of the complete
package.
\2\ 60 kg for jerricans/200 kg for boxes and, for solids, 400 kg in combination packagings with outer packagings comprising boxes (4C1, 4C2, 4D, 4F, 4G,
4H1, and 4H2) and with inner packagings of plastics or fiber with a maximum net mass of 25 kg.
\3\ 60 L for jerricans.
* * * * *
0
34. In Sec. 173.301, paragraph (g)(1)(iii) is revised to read as
follows:
Sec. 173.301 General requirements for shipment of compressed gases
and other hazardous materials in cylinders, UN pressure receptacles and
spherical pressure vessels.
* * * * *
(g) * * *
(1) * * *
(iii) Acetylene as authorized by Sec. 173.303. Mobile acetylene
trailers must be maintained, operated and transported in accordance
with CGA Pamphlet G-1.6 (IBR, see Sec. 171.7 of this subchapter).
* * * * *
0
35. In Sec. 173.304a, paragraph (d)(5) is added as follows:
Sec. 173.304a Additional requirements for shipment of liquefied
compressed gases in specification cylinders.
* * * * *
(d) * * *
(5) Odorization. (i) All liquefied petroleum gas must be odorized
as required in this paragraph to indicate positively, by a distinctive
odor, the presence of gas down to a concentration in air of not over
one-fifth the lower limit of combustibility; however, odorization is
not required if it is harmful in the use or further processing of the
liquefied petroleum gas or if it will serve no useful purpose as a
warning agent in such use or further processing.
(A) The lower limits of combustibility of the more commonly used
liquefied petroleum gases are: Propane, 2.15 percent; butane, 1.55
percent. These figures represent volumetric percentages of gas-air
mixtures in each case.
(B) The use of 1.0 pound of ethyl mercaptan, 1.0 pound of
thiophane, or 1.4 pounds of amyl mercaptan per 10,000 gallons of
liquefied petroleum gas is considered sufficient to meet the
requirements of this paragraph. Use of another odorant is not
prohibited so long as there is enough to meet the requirements of this
paragraph.
(ii) Except as provided in paragraph (d)(5)(i), the offeror must
ensure that enough odorant will remain in the cylinder during the
course of transportation. The shipper must have procedures in place to:
(A) Ensure quantitative testing methods are used to measure the
amount of odorant in the liquefied petroleum gas;
(B) Ensure that, when the odorization of liquefied petroleum gas is
manually injected, the required amount of odorant is added;
(C) Ensure that, when odorization of liquefied petroleum gas is
automatically injected, equipment calibration checks are conducted to
ensure the required amount of odorant is consistently added;
[[Page 3835]]
(D) Ensure quality control measures are in place to make sure that
persons who receive cylinders that have been subjected to any condition
that could lead to corrosion of the cylinder or receive new or recently
cleaned cylinders are notified of this information and that a person
filling these packagings implement quality control measures to ensure
that potential odorant fade is addressed;
(E) Inspect a cylinder for signs of oxidation or corrosion;
(F) Take corrective action needed to ensure enough odorant remains
in the cylinder during the course of transportation, such as increasing
the amount of odorant added to the liquefied petroleum gas; and
(G) Address odorant fade.
* * * * *
0
36. In Sec. 173.306, paragraph (k) is revised to read as follows
Sec. 173.306 Limited quantities of compressed gases.
* * * * *
(k) Aerosols for recycling or disposal. Aerosols, as defined in
Sec. 171.8 of this subchapter, containing a limited quantity which
conforms to the provisions of paragraph (a)(3), (a)(5), (b)(1), (b)(2),
or (b)(3) of this section are excepted from the labeling requirements
of subpart E of part 172 this subchapter, the specification packaging
requirements of this subchapter when packaged according to this
paragraph, the shipping paper requirements of subpart C of part 172 of
this subchapter (unless the material meets the definition of a
hazardous substance or hazardous waste), and the 30 kg (66 pounds)
gross weight limitation, when transported by motor vehicle for purposes
of recycling or disposal under the following conditions:
(1) The strong outer packaging and its contents must not exceed a
gross weight of 500 kg (1,100 pounds);
(2) Each aerosol container must be secured with a cap to protect
the valve stem or the valve stem must be removed;
(3) Each completed packages must be marked in accordance with Sec.
172.315(a);
(4) If the package contains aerosols conforming to the provisions
of paragraph (a)(3), (a)(5), or (b)(1), it must also be marked ``INSIDE
CONTAINERS COMPLY WITH PRESCRIBED REGULATIONS''; and
(5) The packaging must be offered for transportation or transported
by--
(i) Private or contract motor carrier; or
(ii) Common carrier in a motor vehicle under exclusive use for such
service.
* * * * *
0
37. In Sec. 173.314, revise paragraph (h) as follows:
Sec. 173.314 Compressed gases in tank cars and multi-unit tank cars.
* * * * *
(h) Special requirements for liquefied petroleum gas (odorization).
(1) All liquefied petroleum gas must be odorized as required in this
paragraph to indicate positively, by a distinctive odor, the presence
of gas down to a concentration in air of not over one-fifth the lower
limit of combustibility; however, odorization is not required if it is
harmful in the use or further processing of the liquefied petroleum gas
or if it will serve no useful purpose as a warning agent in such use or
further processing.
(i) The lower limits of combustibility of the more commonly used
liquefied petroleum gases are: propane, 2.15 percent; butane, 1.55
percent. These figures represent volumetric percentages of gas-air
mixtures in each case.
(ii) The use of 1.0 pound of ethyl mercaptan, 1.0 pound of
thiophane, or 1.4 pounds of amyl mercaptan per 10,000 gallons of
liquefied petroleum gas is considered sufficient to meet the
requirements of this paragraph. Use of another odorant is not
prohibited so long as there is enough to meet the requirements of this
paragraph.
(2) Except as provided in paragraph (h)(1)(i), the shipper must
ensure that enough odorant will remain in the tank car during the
course of transportation. The shipper must have procedures in place to:
(i) Ensure quantitative testing methods are used to measure the
amount of odorant in the liquefied petroleum gas;
(ii) Ensure that, when the odorization of liquefied petroleum gas
is manually injected, the require amount of odorant is added;
(iii) Ensure that, when odorization of liquefied petroleum gas is
automatically injected, equipment calibration checks are conducted to
ensure the required amount of odorant is consistently added;
(iv) Ensure quality control measures are in place to mark sure that
persons who receive tank cars that have been subjected to any condition
that could lead to corrosion of the tank car or receive new or recently
cleaned tank cars are notified of this information and that a person
filling these packagings implement quality control measures to so that
potential odorant fade is addressed;
(v) Inspect a tank car for signs of oxidation or corrosion;
(vi) Take corrective action needed to ensure enough odorization
remains in the tank car during the course of transportation, such as
increasing the amount of odorant added to the liquefied petroleum gas;
and
(vii) Address odorant fade.
* * * * *
0
38. In Sec. 173.315, paragraph (b) is revised to read as follows:
Sec. 173.315 Compressed gases in cargo tanks and portable tanks.
* * * * *
(b) * * *
(1) Odorization. All liquefied petroleum gas must be odorized as
required in this paragraph to indicate positively, by a distinctive
odor, the presence of gas down to a concentration in air of not over
one-fifth the lower limit of combustibility; however, odorization is
not required if it is harmful in the use or further processing of the
liquefied petroleum gas or if it will serve no useful purpose as a
warning agent in such use or further processing.
(i) The lower limits of combustibility of the more commonly used
liquefied petroleum gases are: propane, 2.15 percent; butane, 1.55
percent. These figures represent volumetric percentages of gas-air
mixtures in each case.
(ii) The use of 1.0 pound of ethyl mercaptan, 1.0 pound of
thiophane, or 1.4 pounds of amyl mercaptan per 10,000 gallons of
liquefied petroleum gas is considered sufficient to meet the
requirements of this paragraph. Use of any other odorant is not
prohibited so long as there is enough to meet the requirements of this
paragraph.
(2) Except as provided in paragraph (b)(1)(i), the shipper must
ensure that enough odorant will remain in the cargo tank or portable
tank during the course of transportation. The shipper must have
procedures in place to:
(i) Ensure quantitative testing methods are used to measure the
amount of odorant in the liquefied petroleum gas;
(ii) Ensure that, when the odorization of liquefied petroleum gas
is manually injected, the required amount of odorant is being added;
(iii) Ensure that, when odorization of liquefied petroleum gas is
automatically injected, equipment calibration checks are conducted to
ensure the required amount of odorant is consistently added;
(iv) Ensure that quality control measures are in place to make sure
that persons who receive cargo tanks or portable tanks that have been
subjected to any condition that could lead to corrosion of the
packaging or receive
[[Page 3836]]
new or recently cleaned cargo tanks or portable tanks are notified of
this information and that a person filling these packagings implement
quality control measures to ensure that potential odorant fade is
addressed;
(v) Inspect a cargo tank or portable tank for signs of oxidation or
corrosion;
(vi) Take corrective action needed to ensure enough odorant remains
in the cargo tank or portable tank during the course of transportation,
such as increasing the amount of odorant added to the liquefied
petroleum gas; and
(vii) Address odorant fade.
* * * * *
PART 175--CARRIAGE BY AIR
0
39. The authority citation for part 175 is revised to read as follows:
Authority: 49 U.S.C. 5101-5128; 49 CFR 1.81 and 1.97.
0
40. In Sec. 175.1, paragraph (d) is added to read as follows:
Sec. 175.1 Purpose, scope and applicability.
* * * * *
(d) The requirements of this subchapter does not apply to
transportation of hazardous material in support of dedicated air
ambulance, firefighting, or search and rescue operations performed in
compliance with the operator requirements under federal air
regulations, the 14 CFR.
* * * * *
0
41. In Sec. 175.8, paragraph (b)(1) is revised to read as follows:
Sec. 175.8 Exceptions for operator equipment and items of
replacement.
* * * * *
(b) * * *
(1) Oxygen, or any hazardous material used for the generation of
oxygen, for medical use by a passenger, which is furnished by the
aircraft operator in accordance with 14 CFR 121.574, 125.219, or
135.91. For the purposes of this paragraph, an aircraft operator that
does not hold a certificate under 14 CFR parts 121, 125, or 135 may
apply this exception in conformance with 14 CFR 121.574, 125.219, or
135.91 in the same manner as required for a certificate holder. See
Sec. 175.501 of this part for additional requirements applicable to
the stowage of oxygen.
* * * * *
Sec. 175.9 [Amended]
0
42. In Sec. 175.9, remove and reserve paragraph (b)(4).
0
43. In Sec. 175.10, paragraphs (a)(6), (a)(22) and (a)(24) are revised
to read as follows:
Sec. 175.10 Exceptions for passengers, crewmembers, and air
operators.
(a) * * *
(6) Hair curlers (curling irons) containing a hydrocarbon gas such
as butane, no more than one per person, in carry-on baggage only. The
safety cover must be securely fitted over the heating element. Gas
refills for such curlers are not permitted in carry-on or checked
baggage.
* * * * *
(22) Non-infectious specimens in preservative solutions transported
in accordance with Sec. 173.4b(b).
* * * * *
(24) Small cartridges fitted into or securely packed with devices
with no more than four small cylinders of carbon dioxide or other
suitable gas in Division 2.2. The water capacity of each cartridge must
not exceed 50 mL (equivalent to a 28 g carbon dioxide cartridge), with
the approval of the operator.
* * * * *
0
44. In Sec. 175.75, in paragraph (e)(2) is revised to read as follows:
Sec. 175.75 Quantity limitations and cargo location.
* * * * *
(e) * * *
(2) Packages of hazardous materials transported aboard a cargo
aircraft, when other means of transportation are impracticable or not
available, in accordance with procedures approved in writing by the FAA
Regional Office in the region where the operator is certificated.
* * * * *
PART 176--CARRIAGE BY VESSEL
0
45. The authority citation for part 176 is revised to read as follows:
Authority: 49 U.S.C. 5101-5128; 49 CFR 1.81 and 1.97.
0
46. In Sec. 176.30, paragraph (a)(4) is revised to read as follows:
Sec. 176.30 Dangerous cargo manifest.
(a) * * *
(4) The number and description of packages (barrels, drums,
cylinders, boxes, etc.) and gross weight for each type of package;
* * * * *
PART 177--CARRIAGE BY PUBLIC HIGHWAY
0
47. The authority citation for part 177 is revised to read as follows:
Authority: 49 U.S.C. 5101-5128; 49 CFR 1.81 and 1.97.
* * * * *
0
48. In Sec. 177.840, paragraph (a)(3) is added to read as follows:
Sec. 177.840 Class 2 (gases) materials.
* * * * *
(a) * * *
(3) Cylinders for acetylene. Cylinders containing acetylene and
manifolded as part of a mobile acetylene trailer system must be
transported in accordance with Sec. 173.301(g).
* * * * *
0
49. In Sec. 177.848, revise paragraph (e)(5) to read as follows:
Sec. 177.848 Segregation of hazardous materials.
* * * * *
(e) * * *
(5) The note ``A'' in the second column of the table means that,
notwithstanding the requirements of the letter ``X'', ammonium nitrate
(UN1942) and ammonium nitrate fertilizer may be loaded or stored with
Division 1.1 (explosive) or Division 1.5 materials, unless otherwise
prohibited by Sec. 177.835(c).
* * * * *
PART 178--SPECIFICATIONS FOR PACKAGINGS
0
50. The authority citation for part 178 is revised to read as follows:
Authority: 49 U.S.C. 5101-5128; 49 CFR 1.81 and 1.97.
0
51. In Sec. 178.65, paragraph (i)(1) is revised to read as follows:
Sec. 178.65 Specification 39 non-reusable (non-refillable) cylinders.
* * * * *
(i) * * *
(1) The markings required by this section must be durable and
waterproof. The requirements of Sec. 178.35(g) do not apply to this
section.
* * * * *
0
52. In Sec. 178.337-17, paragraph (a) is revised to read as follows:
Sec. 178.337-17 Marking.
(a) General. Each cargo tank certified after October 1, 2004 must
have a corrosion-resistant metal name plate (ASME Plate); and each
cargo tank motor vehicle certified after October 1, 2004 must have a
specification plate, permanently attached to the cargo tank by brazing,
welding, or other suitable means on the left side near the front, in a
place accessible for inspection. If the specification plate is attached
directly to the cargo tank wall by welding, it must be welded to the
tank before the cargo tank is postweld heat treated.
* * * * *
[[Page 3837]]
0
53. In Sec. 178.345-3, revise paragraph (c)(1) introductory text to
read as follows:
Sec. 178.345-3 Structural integrity.
* * * * *
(c) * * *
(1) Normal operating loadings. The following procedure addresses
stress in the cargo tank shell resulting from normal operating
loadings. The effective stress (the maximum principal stress at any
point) must be determined by the following formula:
S = 0.5(Sy + Sx)
[0.25(Sy-Sx)\2\ + SS\2\]\0.5\
Where:
* * * * *
0
54. In Sec. 178.955, paragraph (h) is redesignated as paragraph (i),
paragraph (i) is redesignated as paragraph (j) and a new paragraph (h)
is added to read as follows:
Sec. 178.955 General requirements.
* * * * *
(h) Approval of equivalent packagings. A Large Packaging differing
from standards in subpart P of this part, or tested using methods other
than those specified in this subpart, may be used if approved by the
Associate Administrator. The Large Packagings and testing methods must
be shown to have an equivalent level of safety.
* * * * *
PART 179--SPECIFICATIONS FOR TANK CARS
0
55. The authority citation for part 179 is revised to read as follows:
Authority: 49 U.S.C. 5101-5128; 49 CFR 1.81 and 1.97.
0
56. In Sec. 179.13, paragraph (b) is revised to read as follows:
Sec. 179.13 Tank car capacity and gross weight limitation.
* * * * *
(b) Tank cars containing poisonous-by-inhalation material meeting
the applicable authorized tank car specifications listed in Sec.
173.244(a)(2) or (3) or Sec. 173.314(c) or (d) may have a gross weight
on rail of up to 286,000 pounds (129,727 kg). Tank cars containing
poisonous-by-inhalation material not meeting the specifications listed
in Sec. 173.244(a)(2) or (3) or Sec. 173.314(c) or (d) may be loaded
to a gross weight on rail of up to 286,000 pounds (129,727 kg) only
upon approval of the Associate Administrator for Safety, Federal
Railroad Administration (FRA). Any increase in weight above 263,000
pounds may not be used to increase the quantity of the contents of the
tank car.
0
57. In Sec. 179.24, paragraph (a)(2) introductory text is revised to
read as follows:
Sec. 179.24 Stamping.
* * * * *
(a) * * *
(2) Each plate must be stamped, embossed, or otherwise marked by an
equally durable method in letters \3/16\ inch high with the following
information (parenthetical abbreviations may be used, and the AAR form
reference is to the applicable provisions of the AAR Specifications for
Tank Cars (IBR, see Sec. 171.7 of this subchapter)):
* * * * *
PART 180--CONTINUING QUALIFICATION AND MAINTENANCE OF PACKAGINGS
0
58. The authority citation for part 180 is revised to read as follows:
Authority: 49 U.S.C. 5101-5128; 49 CFR 1.81 and 1.97.
0
59. In Sec. 180.209, paragraph (j) is revised to read as follows:
Sec. 180.209 Requirements for requalification of specification
cylinders.
* * * * *
(j) Cylinder used as a fire extinguisher. Only a DOT specification
cylinder used as a fire extinguisher and meeting the requirements of
Sec. 173.309(a) of this subchapter may be requalified in accordance
with this paragraph (j).
* * * * *
0
60. Section 180.401 is revised to read as follows:
Sec. 180.401 Applicability.
This subpart prescribes requirements, in addition to those
contained in parts 107, 171, 172, 173 and 178 of this subchapter,
applicable to any person, hazmat employer or hazmat employee
responsible for the continuing qualification, maintenance or periodic
testing of a cargo tank.
* * * * *
0
61. In Sec. 180.407, the table and notes in paragraph (c) and
paragraphs (d)(3) and (g)(1)(ii) are revised; and paragraph (j) is
added to read as follows:
Sec. 180.407 Requirements for test and inspection of specification
cargo tanks.
* * * * *
(c) * * *
Compliance Dates--Inspections and Test Under Sec. 180.407(c)
----------------------------------------------------------------------------------------------------------------
Test or inspection (cargo tank
specification, configuration, and Date by which first test must be Interval period after first test
service) completed (see Note 1)
----------------------------------------------------------------------------------------------------------------
External Visual Inspection:
* * * * * * *
Internal Visual Inspection:
All insulated cargo tanks, except September 1, 1991.................. 1 year.
MC 330, MC 331, MC 338 (see Note
4).
All cargo tanks transporting lading September 1, 1991.................. 1 year.
corrosive to the tank.
MC 331 cargo tanks less than 3,500 TBD................................ 10 years.
gallons water capacity in
dedicated propane service
constructed of nonquenched and
tempered NQT SA-612 steel (see
Note 5).
All other cargo tanks, except MC September 1, 1995.................. 5 years.
338.
Lining Inspection:
* * * * * * *
Leakage Test:
* * * * * * *
Pressure Test:
(Hydrostatic or pneumatic) (See
Notes 2 and 3).
All cargo tanks which are insulated September 1, 1991.................. 1 year.
with no manhole or insulated and
lined, except MC 338.
All cargo tanks designed to be September 1, 1992.................. 2 years.
loaded by vacuum with full opening
rear heads.
MC 330 and MC 331 cargo tanks in September 1, 1992.................. 2 years.
chlorine service.
[[Page 3838]]
MC 331 cargo tanks less than 3,500 TBD................................ 10 years.
gallons water capacity in
dedicated propane service
constructed of nonquenched and
tempered NQT SA-612 steel (See
Note 5).
All other cargo tanks.............. September 1, 1995.................. 5 years.
Thickness Test:
* * * * * * *
----------------------------------------------------------------------------------------------------------------
Note 1: If a cargo tank is subject to an applicable inspection or test requirement under the regulations in
effect on December 30, 1990, and the due date (as specified by a requirement in effect on December 30, 1990)
for completing the required inspection or test occurs before the compliance date listed in table I, the
earlier date applies.
Note 2: Pressure testing is not required for MC 330 or MC 331 cargo tanks in dedicated sodium metal service.
Note 3: Pressure testing is not required for uninsulated lined cargo tanks, with a design pressure MAWP 15 psig
or less, which receive an external visual inspection and lining inspection at least once each year.
Note 4: Insulated cargo tanks equipped with manholes or inspection openings may perform either an internal
visual inspection in conjunction with the external visual inspection or a hydrostatic or pneumatic pressure-
test of the cargo tank.
Note 5: A 10-year inspection interval period also applies to cargo tanks constructed of NQT SA-202 or NQT SA-455
steels provided the materials have full-size equivalent (FSE) Charpy vee notch (CVN) energy test data that
demonstrated 75% shear-area ductility at 32[emsp14][deg]F with an average of 3 or more samples >15 ft-lb FSE
with no sample <10 ft-lb FSE.
* * * * *
(d) * * *
(3) All reclosing pressure relief valves must be externally
inspected for any corrosion or damage which might prevent safe
operation. All reclosing pressure relief valves on cargo tanks carrying
lading corrosive to the valve must be removed from the cargo tank for
inspection and testing. Each reclosing pressure relief valve required
to be removed and tested must be tested according to the requirements
set forth in paragraph (j) of this section.
* * * * *
(g) * * *
(1) * * *
(ii) All self-closing pressure relief valves, including emergency
relief vents and normal vents, must be removed from the cargo tank for
inspection and testing according to the requirements set forth in
paragraph (j) of this section.
* * * * *
(j) Pressure Vent Bench Test. When required by this section,
pressure relief valves must be tested for proper function as follows:
(1) Each self-closing pressure relief valve must open and reseat to
a leaktight condition at the pressures prescribed for the applicable
cargo tank specification or at the following pressures:
(i) For MC 306 cargo tanks:
(A) With MC 306 reclosing pressure relief valves: Must open at not
less than 3psi and not more than 4.4 psi and must reseat to a leak
tight-condition at no less than 2.7 psi.
(B) With reclosing pressure relief valves modified as provided in
Sec. 180.405(c) of this part to conform with DOT 406 specifications:
According to the pressures set forth for a DOT 406 cargo tank in Sec.
178.346-3 of this subchapter.
(ii) For MC 307 cargo tanks:
(A) With MC 307 reclosing pressure relief valves: Must open at not
less than the cargo tank MAWP and not more than 110% of the cargo tank
MAWP and must reseat to a leak tight-condition at no less than 90% of
the cargo tank MAWP.
(B) With reclosing pressure relief valves modified as provided in
Sec. 180.405(c) of this part to conform with DOT 407 specifications:
According to the pressures set forth for a DOT 407 cargo tank in Sec.
178.347-4 of this subchapter.
(iii) For MC 312 cargo tanks:
(A) With MC 312 reclosing pressure relief valves: Must open at not
less than the cargo tank MAWP and not more than 110% of the cargo tank
MAWP and must reseat to a leak tight-condition at no less than 90% of
the cargo tank MAWP.
(B) With reclosing pressure relief valves modified as provided in
Sec. 180.405(c) of this part to conform with DOT 412 specifications:
According to the pressures set forth for a DOT 412 cargo tank in Sec.
178.348-4 of this subchapter.
(iv) For MC 330 or MC 331 cargo tanks: Must open at not less than
the required set pressure and not more than 110% of the required set
pressure and must reseat to a leak-tight condition at no less than 90%
of the required set pressure.
(v) For DOT 400-series cargo tanks: According to the pressures set
forth for the applicable cargo tank specification in Sec. Sec.
178.346-3, 178.347-4, and 178.348-4, respectively, of this subchapter.
(vi) For cargo tanks not specified in this paragraph: Must open at
not less than the required set pressure and not more than 110% of the
required set pressure and must reseat to a leak-tight condition at no
less than 90% of the required set pressure or the pressure prescribed
for the applicable cargo tank specification.
(2) Normal vents (1 psig vents) must be tested according to the
testing criteria established by the valve manufacturer.
(3) Self-closing pressure relief devices not tested or failing the
tests in this paragraph (j)(1) must be repaired or replaced.
Sec. 180.503 [Amended]
0
62. In section 180.503, under the definition of Qualification, ``AAR
Tank Car Manual'' is removed and ``AAR Specifications for Tank Cars''
is added in its place.
* * * * *
Issued in Washington, DC, on January 7, 2015 under authority
delegated in 49 CFR Part 1.97.
Magdy El-Sibaie,
Associate Administrator for Hazardous Materials Safety, Pipeline and
Hazardous Materials Safety Administration.
[FR Doc. 2015-00265 Filed 1-22-15; 8:45 am]
BILLING CODE 4910-60-P