Accreditation and Approval of Inspectorate America Corporation as a Commercial Gauger and Laboratory, 1653-1654 [2015-00361]

Download as PDF 1653 Federal Register / Vol. 80, No. 8 / Tuesday, January 13, 2015 / Notices Act of 1995 (Pub. L. 104–13; 44 U.S.C. 3507). The comments should address: (a) Whether the collection of information is necessary for the proper performance of the functions of the agency, including whether the information shall have practical utility; (b) the accuracy of the agency’s estimates of the burden of the collection of information; (c) ways to enhance the quality, utility, and clarity of the information to be collected; (d) ways to minimize the burden, including the use of automated collection techniques or the use of other forms of information technology; and (e) the annual costs to respondents or record keepers from the collection of information (total capital/ startup costs and operations and maintenance costs). The comments that are submitted will be summarized and included in the CBP request for OMB approval. All comments will become a matter of public record. In this document, CBP is soliciting comments concerning the following information collection: Title: General Declaration (Outward/ Inward) Agriculture, Customs, Immigration, and Public Health. OMB Number: 1651–0002. Form Number: Form 7507. Abstract: CBP Form 7507, General Declaration (Outward/Inward) Agriculture, Customs, Immigration, and Public Health, must be filed for all aircraft entering under the provisions of 19 CFR 122.41. This form is used to document clearance by the arriving aircraft at the required inspectional facilities and inspections by appropriate regulatory agency staffs. CBP Form 7507 collects information about the flight routing, the numbers of passengers embarking and disembarking, a declaration of health for the persons on board, details about disinfecting and sanitizing treatments during the flight, and a declaration attesting to the accuracy and completeness and truthfulness of all other documents that make up the manifest. CBP Form 7507 is authorized by 19 U.S.C. 1431, 1433, and 1644a; 39 U.S.C. 602(b) and provided for by 19 CFR 122.43, 122.48, 122.54, 122.73, and 122.144. This form is accessible at: https://www.cbp.gov/sites/default/files/ documents/CBP%20Form%207507.pdf. Action: CBP proposes to extend the expiration date of this information collection with no change to the burden hours or to CBP Forms 7507. Type of Review: Extension (without change). Affected Public: Businesses. Estimated Number of Respondents: 500. Estimated Number of Total Annual Responses: 1,000,000. Estimated Time per Response: 5 minutes. Estimated Annual Burden Hours: 83,000. Dated: January 7, 2015. Tracey Denning, Agency Clearance Officer, U.S. Customs and Border Protection. [FR Doc. 2015–00303 Filed 1–12–15; 8:45 am] BILLING CODE 9111–14–P DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection Accreditation and Approval of Inspectorate America Corporation as a Commercial Gauger and Laboratory U.S. Customs and Border Protection, Department of Homeland Security. ACTION: Notice of accreditation and approval of Inspectorate America Corporation, as a commercial gauger and laboratory. AGENCY: Notice is hereby given, pursuant to CBP regulations, that Inspectorate America Corporation has been approved to gauge petroleum and certain petroleum products and accredited to test petroleum and certain SUMMARY: petroleum products for customs purposes for the next three years as of June 24, 2014. Effective: The accreditation and approval of Inspectorate America Corporation, as commercial gauger and laboratory became effective on June 24, 2014. The next triennial inspection date will be scheduled for June 2017. DATES: FOR FURTHER INFORMATION CONTACT: Approved Gauger and Accredited Laboratories Manager, Laboratories and Scientific Services Directorate, U.S. Customs and Border Protection, 1331 Pennsylvania Avenue NW., Suite 1500N, Washington, DC 20229, tel. 202– 344–1060. Notice is hereby given pursuant to 19 CFR 151.12 and 19 CFR 151.13, that Inspectorate America Corporation, 16025–C Jacintoport Blvd., Houston, TX 77015, has been approved to gauge petroleum and certain petroleum products and accredited to test petroleum and certain petroleum products for customs purposes, in accordance with the provisions of 19 CFR 151.12 and 19 CFR 151.13. Inspectorate America Corporation is approved for the following gauging procedures for petroleum and certain petroleum products per the American Petroleum Institute (API) Measurement Standards: SUPPLEMENTARY INFORMATION: API chapters 3 ................. 7 ................. 8 ................. 12 ............... 17 ............... Title Tank gauging. Temperature determination. Sampling. Calculations. Maritime measurement. Inspectorate America Corporation is accredited for the following laboratory analysis procedures and methods for petroleum and certain petroleum products set forth by the U.S. Customs and Border Protection Laboratory Methods (CBPL) and American Society for Testing and Materials (ASTM): ASTM Title 27–01 ............................ ASTM D 287 ........................ 27–03 ............................ 27–04 ............................ asabaliauskas on DSK5VPTVN1PROD with NOTICES CBPL No. ASTM D 4006 ...................... ASTM D 95 .......................... 27–06 ............................ ASTM D 473 ........................ 27–11 ............................ ASTM D 445 ........................ 27–13 ............................ ASTM D 4294 ...................... 27–48 ............................ ASTM D 4052 ...................... 27–50 ............................ ASTM D 93 .......................... Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method). Standard Test Method for Water in Crude Oil by Distillation. Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation. Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method. Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Velocity). Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry. Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter. Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. VerDate Sep<11>2014 17:10 Jan 12, 2015 Jkt 235001 PO 00000 Frm 00034 Fmt 4703 Sfmt 4703 E:\FR\FM\13JAN1.SGM 13JAN1 1654 Federal Register / Vol. 80, No. 8 / Tuesday, January 13, 2015 / Notices CBPL No. ASTM Title 27–54 ............................ ASTM D 1796 ...................... Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure). Anyone wishing to employ this entity to conduct laboratory analyses and gauger services should request and receive written assurances from the entity that it is accredited or approved by the U.S. Customs and Border Protection to conduct the specific test or gauger service requested. Alternatively, inquiries regarding the specific test or gauger service this entity is accredited or approved to perform may be directed to the U.S. Customs and Border Protection by calling (202) 344–1060. The inquiry may also be sent to cbp.labhq@dhs.gov. Please reference the Web site listed below for a complete listing of CBP approved gaugers and accredited laboratories. https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories. Dated: January 5, 2015. Ira S. Reese, Executive Director, Laboratories and Scientific Services Directorate. [FR Doc. 2015–00361 Filed 1–12–15; 8:45 am] BILLING CODE 9111–14–P DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection Approval of International Marine Consultants as a Commercial Gauger U.S. Customs and Border Protection, Department of Homeland Security. ACTION: Notice of approval of International Marine Consultants as a commercial gauger. AGENCY: Notice is hereby given, pursuant to CBP regulations, that International Marine Consultants, has been approved to gauge petroleum and certain petroleum products for customs purposes for the next three years as of September 19, 2014. DATES: Effective: The approval of International Marine Consultants, as commercial gauger became effective on September 19, 2014. The next triennial inspection date will be scheduled for September 2017. FOR FURTHER INFORMATION CONTACT: Approved Gauger and Accredited Laboratories Manager, Laboratories and Scientific Services Directorate, U.S. Customs and Border Protection, 1300 Pennsylvania Avenue NW., Suite asabaliauskas on DSK5VPTVN1PROD with NOTICES SUMMARY: VerDate Sep<11>2014 17:10 Jan 12, 2015 Jkt 235001 1500N, Washington, DC 20229, tel. 202– 344–1060. Notice is hereby given pursuant to 19 CFR 151.13, that International Marine Consultants, #429 Padre Rufo St., San Juan, PR 00917, has been approved to gauge petroleum and certain petroleum products for customs purposes, in accordance with the provisions of 19 CFR 151.13. International Marine Consultants is approved for the following gauging procedures for petroleum and certain petroleum products from the American Petroleum Institute (API): SUPPLEMENTARY INFORMATION: API chapters 3 ................. 7 ................. 12 ............... 17 ............... Title Tank gauging. Temperature determination. Calculations. Maritime measurement. Anyone wishing to employ this entity to conduct gauger services should request and receive written assurances from the entity that it is approved by the U.S. Customs and Border Protection to conduct the specific gauger service requested. Alternatively, inquiries regarding the specific gauger service this entity is approved to perform may be directed to the U.S. Customs and Border Protection by calling (202) 344–1060. The inquiry may also be sent to CBPGaugersLabs@cbp.dhs.gov. Please reference the Web site listed below for a complete listing of CBP approved gaugers and accredited laboratories. https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories. Dated: January 5, 2015. Ira S. Reese, Executive Director, Laboratories and Scientific Services Directorate. [FR Doc. 2015–00363 Filed 1–12–15; 8:45 am] BILLING CODE 9111–14–P DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection Approval of Inspectorate America Corporation as a Commercial Gauger U.S. Customs and Border Protection, Department of Homeland Security. AGENCY: PO 00000 Frm 00035 Fmt 4703 Sfmt 4703 Notice of approval of Inspectorate America Corporation, as a commercial gauger. ACTION: Notice is hereby given, pursuant to CBP regulations, that Inspectorate America Corporation has been approved to gauge petroleum and certain petroleum products for customs purposes for the next three years as of July 29, 2014. DATES: Effective: The approval of Inspectorate America Corporation, as commercial gauger became effective on July 29, 2014. The next triennial inspection date will be scheduled for July 2017. FOR FURTHER INFORMATION CONTACT: Approved Gauger and Accredited Laboratories Manager, Laboratories and Scientific Services Directorate, U.S. Customs and Border Protection, 1331 Pennsylvania Avenue NW., Suite 1500N, Washington, DC 20229, tel. 202– 344–1060. SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR 151.13, that Inspectorate America Corporation, 11346 Pennywood Ave., Baton Rouge, LA 70809, has been approved to gauge petroleum and certain petroleum products for customs purposes, in accordance with the provisions of 19 CFR 151.13. Inspectorate America Corporation is approved for the following gauging procedures for petroleum and certain petroleum products per the American Petroleum Institute (API) Measurement Standards: SUMMARY: API chapters 3 ................. 7 ................. 8 ................. 11 ............... 12 ............... 17 ............... Title Tank gauging. Temperature determination. Sampling. Physical property. Calculations. Maritime measurement. Anyone wishing to employ this entity to conduct gauger services should request and receive written assurances from the entity that it is approved by the U.S. Customs and Border Protection to conduct the specific gauger service requested. Alternatively, inquiries regarding the specific gauger service this entity is approved to perform may be directed to the U.S. Customs and Border Protection by calling (202) 344–1060. The inquiry may also be sent to cbp.labhq@dhs.gov. Please reference the Web site listed below for a complete E:\FR\FM\13JAN1.SGM 13JAN1

Agencies

[Federal Register Volume 80, Number 8 (Tuesday, January 13, 2015)]
[Notices]
[Pages 1653-1654]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2015-00361]


-----------------------------------------------------------------------

DEPARTMENT OF HOMELAND SECURITY

U.S. Customs and Border Protection


Accreditation and Approval of Inspectorate America Corporation as 
a Commercial Gauger and Laboratory

AGENCY: U.S. Customs and Border Protection, Department of Homeland 
Security.

ACTION: Notice of accreditation and approval of Inspectorate America 
Corporation, as a commercial gauger and laboratory.

-----------------------------------------------------------------------

SUMMARY: Notice is hereby given, pursuant to CBP regulations, that 
Inspectorate America Corporation has been approved to gauge petroleum 
and certain petroleum products and accredited to test petroleum and 
certain petroleum products for customs purposes for the next three 
years as of June 24, 2014.

DATES: Effective: The accreditation and approval of Inspectorate 
America Corporation, as commercial gauger and laboratory became 
effective on June 24, 2014. The next triennial inspection date will be 
scheduled for June 2017.

FOR FURTHER INFORMATION CONTACT: Approved Gauger and Accredited 
Laboratories Manager, Laboratories and Scientific Services Directorate, 
U.S. Customs and Border Protection, 1331 Pennsylvania Avenue NW., Suite 
1500N, Washington, DC 20229, tel. 202-344-1060.

SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR 
151.12 and 19 CFR 151.13, that Inspectorate America Corporation, 16025-
C Jacintoport Blvd., Houston, TX 77015, has been approved to gauge 
petroleum and certain petroleum products and accredited to test 
petroleum and certain petroleum products for customs purposes, in 
accordance with the provisions of 19 CFR 151.12 and 19 CFR 151.13. 
Inspectorate America Corporation is approved for the following gauging 
procedures for petroleum and certain petroleum products per the 
American Petroleum Institute (API) Measurement Standards:

------------------------------------------------------------------------
              API chapters                            Title
------------------------------------------------------------------------
3......................................  Tank gauging.
7......................................  Temperature determination.
8......................................  Sampling.
12.....................................  Calculations.
17.....................................  Maritime measurement.
------------------------------------------------------------------------

    Inspectorate America Corporation is accredited for the following 
laboratory analysis procedures and methods for petroleum and certain 
petroleum products set forth by the U.S. Customs and Border Protection 
Laboratory Methods (CBPL) and American Society for Testing and 
Materials (ASTM):

----------------------------------------------------------------------------------------------------------------
                CBPL No.                              ASTM                               Title
----------------------------------------------------------------------------------------------------------------
27-01...................................  ASTM D 287.................  Standard Test Method for API Gravity of
                                                                        Crude Petroleum and Petroleum Products
                                                                        (Hydrometer Method).
27-03...................................  ASTM D 4006................  Standard Test Method for Water in Crude
                                                                        Oil by Distillation.
27-04...................................  ASTM D 95..................  Standard Test Method for Water in
                                                                        Petroleum Products and Bituminous
                                                                        Materials by Distillation.
27-06...................................  ASTM D 473.................  Standard Test Method for Sediment in
                                                                        Crude Oils and Fuel Oils by the
                                                                        Extraction Method.
27-11...................................  ASTM D 445.................  Standard Test Method for Kinematic
                                                                        Viscosity of Transparent and Opaque
                                                                        Liquids (the Calculation of Dynamic
                                                                        Velocity).
27-13...................................  ASTM D 4294................  Standard Test Method for Sulfur in
                                                                        Petroleum and Petroleum Products by
                                                                        Energy-Dispersive X-Ray Fluorescence
                                                                        Spectrometry.
27-48...................................  ASTM D 4052................  Standard Test Method for Density and
                                                                        Relative Density of Liquids by Digital
                                                                        Density Meter.
27-50...................................  ASTM D 93..................  Standard Test Methods for Flash Point by
                                                                        Pensky-Martens Closed Cup Tester.

[[Page 1654]]

 
27-54...................................  ASTM D 1796................  Standard Test Method for Water and
                                                                        Sediment in Fuel Oils by the Centrifuge
                                                                        Method (Laboratory Procedure).
----------------------------------------------------------------------------------------------------------------

    Anyone wishing to employ this entity to conduct laboratory analyses 
and gauger services should request and receive written assurances from 
the entity that it is accredited or approved by the U.S. Customs and 
Border Protection to conduct the specific test or gauger service 
requested. Alternatively, inquiries regarding the specific test or 
gauger service this entity is accredited or approved to perform may be 
directed to the U.S. Customs and Border Protection by calling (202) 
344-1060. The inquiry may also be sent to cbp.labhq@dhs.gov. Please 
reference the Web site listed below for a complete listing of CBP 
approved gaugers and accredited laboratories.
    https://www.cbp.gov/about/labs-scientific/commercial-gaugers-and-laboratories.

    Dated: January 5, 2015.
Ira S. Reese,
Executive Director, Laboratories and Scientific Services Directorate.
[FR Doc. 2015-00361 Filed 1-12-15; 8:45 am]
BILLING CODE 9111-14-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.