Export Trade Certificate of Review, 77457-77458 [2014-30211]

Download as PDF 77457 Federal Register / Vol. 79, No. 247 / Wednesday, December 24, 2014 / Notices —Alloy hot-rolled steel products in which at least one of the chemical elements exceeds those listed above (including e.g., ASTM specifications A543, A387, A514, A517, and A506). —SAE/AISI grades of series 2300 and higher. —USS Abrasion-resistant steels (USS AR 400, USS AR 500). —Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications: —Ball bearing steels, as defined in the HTSUS. —Tool steels, as defined in the HTSUS. —Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 1.50 percent. —ASTM specifications A710 and A736. C Mn P S Si Cr Cu Ni 0.10–0.14% 0.90% Max 0.025% Max 0.005% Max 0.30–0.50% 0.50–0.70% 0.20–0.40% 0.20% Max Width = 44.80 inches maximum; Thickness = 0.063–0.198 inches; Yield Strength = 50,000 ksi minimum; Tensile Strength = 70,000–88,000 psi. —Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications: C Mn P S Si Cr Cu Ni Mo 0.10–0.16% 0.70–0.90% 0.025% Max 0.006% Max 0.30–0.50% 0.50–0.70% 0.25% Max 0.20% Max 0.21% Max Width = 44.80 inches maximum; Thickness = 0.350 inches maximum; Yield Strength = 80,000 ksi minimum; Tensile Strength = 105,000 psi Aim. —Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications: C Mn P S Si Cr Cu Ni V(wt.) Cb 0.10–0.14% 1.30–1.80% 0.025% Max 0.005% Max 0.30–0.50% 0.50–0.70% 0.20–0.40% 0.20% Max 0.10 Max 0.08% Max Width = 44.80 inches maximum; Thickness = 0.350 inches maximum; Yield Strength = 80,000 ksi minimum; Tensile Strength = 105,000 psi Aim. —Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications: C Mn P S Si Cr Cu Ni Nb Ca Al 0.15% Max 1.40% Max 0.025% Max 0.010% Max 0.50% Max 1.00% Max 0.50% Max 0.20% Max 0.005% Min Treated 0.01–0.07% mstockstill on DSK4VPTVN1PROD with NOTICES Width = 39.37 inches; Thickness = 0.181 inches maximum; Yield Strength = 70,000 psi minimum for thicknesses ≤0.148 inches and 65,000 psi minimum for thicknesses >0.148 inches; Tensile Strength = 80,000 psi minimum. —Hot-rolled dual phase steel, phasehardened, primarily with a ferriticmartensitic microstructure, contains 0.9 percent up to and including 1.5 percent silicon by weight, further characterized by either (i) tensile strength between 540 N/mm2 and 640 N/mm2 and an elongation percentage ≥26 percent for thicknesses of 2 mm and above, or (ii) a tensile strength between 590 N/mm2 and 690 N/mm2 and an elongation percentage ≥25 percent for thicknesses of 2mm and above. —Hot-rolled bearing quality steel, SAE grade 1050, in coils, with an inclusion rating of 1.0 maximum per ASTM E 45, Method A, with excellent surface quality and chemistry restrictions as follows: 0.012 percent maximum phosphorus, 0.015 percent maximum sulfur, and 0.20 percent maximum residuals including 0.15 percent maximum chromium. —Grade ASTM A570–50 hot-rolled steel sheet in coils or cut lengths, width of 74 inches (nominal, within ASTM tolerances), thickness of 11 gauge (0.119 inches nominal), mill edge and skin passed, with a minimum copper content of 0.20 percent. The covered merchandise is classified in the Harmonized Tariff Schedule of the United States (‘‘HTSUS’’) at subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, VerDate Sep<11>2014 16:34 Dec 23, 2014 Jkt 235001 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7208.40.60.30, 7208.40.60.60, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7211.19.75.30, 7211.19.75.60, 7211.19.75.90, 7212.40.10.00, 7212.40.50.00, 7212.50.00.00. Certain hot-rolled flat-rolled carbon-quality steel covered include: Vacuum degassed, fully stabilized; high strength low alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers: 7225.11.00.00, 7225.19.00.00, 7225.30.30.50, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7226.11.90.30, 7226.11.90.60, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, 7226.99.00.00 and 7226.99.0180. Although the HTSUS subheadings are provided for convenience and Customs purposes, the written description of the covered merchandise is dispositive. [FR Doc. 2014–30234 Filed 12–23–14; 8:45 am] BILLING CODE 3510–DS–P PO 00000 Frm 00017 Fmt 4703 Sfmt 4703 DEPARTMENT OF COMMERCE International Trade Administration [Application No. 14–00003] Export Trade Certificate of Review Notice of Application for an Export Trade Certificate of Review for Wayne Jones dba Imani Resource Service Application No. 14–00003. ACTION: The Office of Trade and Economic Analysis (‘‘OTEA’’) of the International Trade Administration, Department of Commerce, has received an application for an Export Trade Certificate of Review (‘‘Certificate’’). This notice summarizes the proposed application and requests comments relevant to whether the Certificate should be issued. FOR FURTHER INFORMATION CONTACT: Joseph Flynn, Director, Office of Trade and Economic Analysis, International Trade Administration, (202) 482–5131 (this is not a toll-free number) or email at etca@trade.gov. SUMMARY: E:\FR\FM\24DEN1.SGM 24DEN1 77458 Federal Register / Vol. 79, No. 247 / Wednesday, December 24, 2014 / Notices Title III of the Export Trading Company Act of 1982 (15 U.S.C. 4001–21) authorizes the Secretary of Commerce to issue Export Trade Certificates of Review. An Export Trade Certificate of Review protects the holder and the members identified in the Certificate from State and Federal government antitrust actions and from private treble damage antitrust actions for the export conduct specified in the Certificate and carried out in compliance with its terms and conditions. Section 302(b)(1) of the Export Trading Company Act of 1982 and 15 CFR 325.6(a) require the Secretary to publish a notice in the Federal Register identifying the applicant and summarizing its proposed export conduct. Request For Public Comments: Interested parties may submit written comments relevant to the determination whether an amended Certificate should be issued. If the comments include any privileged or confidential business information, it must be clearly marked and a nonconfidential version of the comments (identified as such) should be included. Any comments not marked as privileged or confidential business information will be deemed to be nonconfidential. An original and five (5) copies, plus two (2) copies of the nonconfidential version, should be submitted no later than 20 days after the date of this notice to: Export Trading Company Affairs, International Trade Administration, U.S. Department of Commerce, Room 7025–X, Washington, DC 20230. Information submitted by any person is exempt from disclosure under the Freedom of Information Act (5 U.S.C. 552). However, nonconfidential versions of the comments will be made available to the applicant if necessary for determining whether or not to issue the Certificate. Comments should refer to this application as ‘‘Export Trade Certificate of Review, application number 14–00003.’’ A summary of the current application follows. Export Trade Summary of the Application Applicant: Wayne Jones dba Imani Resource Service, 115 Plaza Dr. #605, Kerrville, TX 78028 Application No.: 14–00003 Date Deemed Submitted: December 10, 2014 Summary: Wayne Jones dba Imani Resource Service (‘‘WJIR’’) seeks a Certificate of Review to engage in the Export Trade Activities and Methods of Operation described below in the following Export Trade and Export Markets The Export Markets include all parts of the world except the United States (the fifty states of the United States, the District of Columbia, the Commonwealth of Puerto Rico, the Virgin Islands, American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the Trust Territory of the Pacific Islands). mstockstill on DSK4VPTVN1PROD with NOTICES SUPPLEMENTARY INFORMATION: VerDate Sep<11>2014 16:34 Dec 23, 2014 Jkt 235001 Products: All Products. Services: All services related to the export of Products. Technology Rights: All intellectual property rights associated with Products or Services, including, but not limited to: Patents, trademarks, services marks, trade names, copyrights, neighboring (related) rights, trade secrets, knowhow, and confidential databases and computer programs. Export Trade Facilitation Services (as They Relate to the Export of Products): Export Trade Facilitation Services, including but not limited to: Consulting and trade strategy, arranging and coordinating delivery of Products to the port of export; arranging for inland and/ or ocean transportation; allocating Products to vessel; arranging for storage space at port; arranging for warehousing, stevedoring, wharfage, handling, inspection, fumigation, and freight forwarding; insurance and financing; documentation and services related to compliance with customs’ requirements; sales and marketing; export brokerage; foreign marketing and analysis; foreign market development; overseas advertising and promotion; Products-related research and design based upon foreign buyer and consumer preferences; inspection and quality control; shipping and export management; export licensing; provisions of overseas sales and distribution facilities and overseas sales staff; legal; accounting and tax assistance; development and application of management information systems; trade show exhibitions; professional services in the area of government relations and assistance with federal and state export assistance programs (e.g., Export Enhancement and Market Promotion programs, invoicing (billing) foreign buyers; collecting (letters of credit and other financial instruments) payment for Products; and arranging for payment of applicable commissions and fees. Export Markets Export Trade Activities and Methods of Operations To engage in Export Trade in the Export Markets, WJIR may provide and/ PO 00000 Frm 00018 Fmt 4703 Sfmt 4703 or arrange for the provision of Export Trade Facilitation Services. Dated: December 18, 2014. Joseph Flynn, Director, Office of Trade and Economic Analysis, International Trade Administration. [FR Doc. 2014–30211 Filed 12–23–14; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Renewable Energy and Energy Efficiency Advisory Committee: Open Meeting by Teleconference International Trade Administration, Commerce. ACTION: Notice of an open meeting by teleconference. AGENCY: The Renewable Energy and Energy Efficiency Advisory Committee (RE&EEAC) will hold a meeting by teleconference on Tuesday, January 13, 2015. The meeting is open to the public and the call-in information will be provided upon request. DATES: January 13, 2015, from 1 p.m. to 2 p.m. Eastern Standard Time (EST). Members of the public wishing to participate in the teleconference must notify Andrew Bennett at the contact information below by 5 p.m. EST on Friday, January 9, 2015, in order to preregister for access to the teleconference line and to receive relevant information in advance of the meeting. FOR ALL FURTHER INFORMATION CONTACT: Including Teleconference Access: Andrew Bennett, Office of Energy and Environmental Industries (OEEI), International Trade Administration, U.S. Department of Commerce at (202) 482–5235; email: Andrew.Bennett@ trade.gov. SUMMARY: SUPPLEMENTARY INFORMATION: Background: The Secretary of Commerce established the RE&EEAC pursuant to his discretionary authority and in accordance with the Federal Advisory Committee Act (5 U.S.C. App.) on July 14, 2010. The RE&EEAC was rechartered on June 12, 2014. The RE&EEAC provides the Secretary of Commerce with consensus advice from the private sector on the development and administration of programs and policies to enhance the international competitiveness of the U.S. renewable energy and energy efficiency industries. During the January 13th teleconference meeting of the RE&EEAC, committee members will discuss priority issues identified in advance by the interim Sub-Committee for E:\FR\FM\24DEN1.SGM 24DEN1

Agencies

[Federal Register Volume 79, Number 247 (Wednesday, December 24, 2014)]
[Notices]
[Pages 77457-77458]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-30211]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[Application No. 14-00003]


Export Trade Certificate of Review

ACTION: Notice of Application for an Export Trade Certificate of Review 
for Wayne Jones dba Imani Resource Service Application No. 14-00003.

-----------------------------------------------------------------------

SUMMARY: The Office of Trade and Economic Analysis (``OTEA'') of the 
International Trade Administration, Department of Commerce, has 
received an application for an Export Trade Certificate of Review 
(``Certificate''). This notice summarizes the proposed application and 
requests comments relevant to whether the Certificate should be issued.

FOR FURTHER INFORMATION CONTACT: Joseph Flynn, Director, Office of 
Trade and Economic Analysis, International Trade Administration, (202) 
482-5131 (this is not a toll-free number) or email at etca@trade.gov.

[[Page 77458]]


SUPPLEMENTARY INFORMATION: Title III of the Export Trading Company Act 
of 1982 (15 U.S.C. 4001-21) authorizes the Secretary of Commerce to 
issue Export Trade Certificates of Review. An Export Trade Certificate 
of Review protects the holder and the members identified in the 
Certificate from State and Federal government antitrust actions and 
from private treble damage antitrust actions for the export conduct 
specified in the Certificate and carried out in compliance with its 
terms and conditions. Section 302(b)(1) of the Export Trading Company 
Act of 1982 and 15 CFR 325.6(a) require the Secretary to publish a 
notice in the Federal Register identifying the applicant and 
summarizing its proposed export conduct.
    Request For Public Comments: Interested parties may submit written 
comments relevant to the determination whether an amended Certificate 
should be issued. If the comments include any privileged or 
confidential business information, it must be clearly marked and a 
nonconfidential version of the comments (identified as such) should be 
included. Any comments not marked as privileged or confidential 
business information will be deemed to be nonconfidential.
    An original and five (5) copies, plus two (2) copies of the 
nonconfidential version, should be submitted no later than 20 days 
after the date of this notice to: Export Trading Company Affairs, 
International Trade Administration, U.S. Department of Commerce, Room 
7025-X, Washington, DC 20230.
    Information submitted by any person is exempt from disclosure under 
the Freedom of Information Act (5 U.S.C. 552). However, nonconfidential 
versions of the comments will be made available to the applicant if 
necessary for determining whether or not to issue the Certificate. 
Comments should refer to this application as ``Export Trade Certificate 
of Review, application number 14-00003.''
    A summary of the current application follows.

Summary of the Application

Applicant: Wayne Jones dba Imani Resource Service, 115 Plaza Dr. #605, 
Kerrville, TX 78028
Application No.: 14-00003
Date Deemed Submitted: December 10, 2014
Summary: Wayne Jones dba Imani Resource Service (``WJIR'') seeks a 
Certificate of Review to engage in the Export Trade Activities and 
Methods of Operation described below in the following Export Trade and 
Export Markets

Export Trade

    Products: All Products.
    Services: All services related to the export of Products.
    Technology Rights: All intellectual property rights associated with 
Products or Services, including, but not limited to: Patents, 
trademarks, services marks, trade names, copyrights, neighboring 
(related) rights, trade secrets, know-how, and confidential databases 
and computer programs.
    Export Trade Facilitation Services (as They Relate to the Export of 
Products): Export Trade Facilitation Services, including but not 
limited to: Consulting and trade strategy, arranging and coordinating 
delivery of Products to the port of export; arranging for inland and/or 
ocean transportation; allocating Products to vessel; arranging for 
storage space at port; arranging for warehousing, stevedoring, 
wharfage, handling, inspection, fumigation, and freight forwarding; 
insurance and financing; documentation and services related to 
compliance with customs' requirements; sales and marketing; export 
brokerage; foreign marketing and analysis; foreign market development; 
overseas advertising and promotion; Products-related research and 
design based upon foreign buyer and consumer preferences; inspection 
and quality control; shipping and export management; export licensing; 
provisions of overseas sales and distribution facilities and overseas 
sales staff; legal; accounting and tax assistance; development and 
application of management information systems; trade show exhibitions; 
professional services in the area of government relations and 
assistance with federal and state export assistance programs (e.g., 
Export Enhancement and Market Promotion programs, invoicing (billing) 
foreign buyers; collecting (letters of credit and other financial 
instruments) payment for Products; and arranging for payment of 
applicable commissions and fees.

Export Markets

    The Export Markets include all parts of the world except the United 
States (the fifty states of the United States, the District of 
Columbia, the Commonwealth of Puerto Rico, the Virgin Islands, American 
Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the 
Trust Territory of the Pacific Islands).

Export Trade Activities and Methods of Operations

    To engage in Export Trade in the Export Markets, WJIR may provide 
and/or arrange for the provision of Export Trade Facilitation Services.

    Dated: December 18, 2014.
Joseph Flynn,
Director, Office of Trade and Economic Analysis, International Trade 
Administration.
[FR Doc. 2014-30211 Filed 12-23-14; 8:45 am]
BILLING CODE 3510-DS-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.