Foreign-Trade Zone 246-Waco, Texas; Application for Subzone; Spenco Medical Corporation; Waco, Texas, 69424 [2014-27676]

Download as PDF 69424 Federal Register / Vol. 79, No. 225 / Friday, November 21, 2014 / Notices Pursuant to the authority delegated to the FTZ Board’s Executive Secretary (15 CFR Sec. 400.36(f)), the application to establish Subzone 83D is approved, subject to the FTZ Act and the Board’s regulations, including Section 400.13, and further subject to FTZ 83’s 2,000acre activation limit. For further information, contact Camille Evans at Camille.Evans@ trade.gov or (202) 482–2350. Dated: November 17, 2014. Andrew McGilvray, Executive Secretary. [FR Doc. 2014–27676 Filed 11–20–14; 8:45 am] BILLING CODE 3510–DS–P Dated: November 17, 2014. Andrew McGilvray, Executive Secretary. DEPARTMENT OF COMMERCE [FR Doc. 2014–27653 Filed 11–20–14; 8:45 am] International Trade Administration BILLING CODE 3510–DS–P [A–570–601] DEPARTMENT OF COMMERCE Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, From the People’s Republic of China: Notice of Preliminary Results of Changed Circumstances Review and Extension of the Final Results Foreign-Trade Zones Board [S–143–2014] mstockstill on DSK4VPTVN1PROD with NOTICES Foreign-Trade Zone 246—Waco, Texas; Application for Subzone; Spenco Medical Corporation; Waco, Texas An application has been submitted to the Foreign-Trade Zones Board (the Board) by the City of Waco, grantee of FTZ 246, requesting subzone status for the facility of Spenco Medical Corporation, located in Waco, Texas. The application was submitted pursuant to the provisions of the Foreign-Trade Zones Act, as amended (19 U.S.C. 81a– 81u), and the regulations of the Board (15 CFR part 400). It was formally docketed on November 17, 2014. The proposed subzone (12.9 acres) is located at 6301 Imperial Drive in Waco. The proposed subzone would be subject to the existing activation limit of FTZ 246. No authorization for production activity has been requested at this time. In accordance with the Board’s regulations, Camille Evans of the FTZ Staff is designated examiner to review the application and make recommendations to the Executive Secretary. Public comment is invited from interested parties. Submissions shall be addressed to the Board’s Executive Secretary at the address below. The closing period for their receipt is December 31, 2014. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to January 15, 2015. A copy of the application will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the Board’s Web site, which is accessible via www.trade.gov/ftz. VerDate Sep<11>2014 18:00 Nov 20, 2014 Jkt 235001 Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: On June 28, 2013, the Department of Commerce (the Department) initiated a changed circumstances review (CCR) of the antidumping duty (AD) order on tapered roller bearings (TRBs) and parts thereof, finished and unfinished, from the People’s Republic of China (PRC) in order to determine whether Shanghai General Bearing Co., Ltd. (SGBC/SKF), a producer/exporter of TRBs in the PRC, is the successor-in-interest to a company revoked from the AD order on TRBs in 1997 (also known as ‘‘SGBC’’). We preliminarily determine that SGBC/SKF is the successor-in-interest to SGBC. Interested parties are invited to comment on these preliminary results. DATES: Effective Date: November 21, 2014. AGENCY: FOR FURTHER INFORMATION CONTACT: Stephen Banea, AD/CVD Operations, Office II, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482–0656. SUPPLEMENTARY INFORMATION: Background On June 15, 1987, the Department published in the Federal Register the AD order on TRBs from the PRC.1 On February 11, 1997, the Department revoked the order on TRBs from the PRC with respect to merchandise produced 1 See Antidumping Duty Order: Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, From the People’s Republic of China, 52 FR 22667 (June 15, 1987). PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 and exported by SGBC, effective as of June 1, 1994.2 Effective August 1, 2012, the majority shareholder of SGBC, the General Bearing Corporation (GBC), merged with AB SKF (SKF) and, as a result of the merger, both GBC and SGBC became part of the SKF Group. On February 13, 2013, SGBC/SKF 3 requested that the Department conduct a CCR pursuant to 19 CFR 351.221(c)(3)(ii) to determine whether it is the successor-in-interest to SGBC as it existed prior to its affiliation with SKF. On June 28, 2013, the Department published in the Federal Register a notice initiating a CCR to address this question.4 Between July 2013 and February 2014, the Department requested additional information from SGBC/SKF, and SGBC/SKF submitted its responses to these requests from August 2013 through March 2014. Between September 2013 and July 2014, we received comments on SGBC/SKF’s submissions from the Timken Company, the petitioner in this proceeding. In December 2013, we also received comments from Stemco LP (Stemco), a U.S. manufacturer and importer of TRBs. Scope of the Order Imports covered by the order are shipments of tapered roller bearings and parts thereof, finished and unfinished, from the People’s Republic of China; flange, take up cartridge, and hanger units incorporating tapered roller bearings; and tapered roller housings (except pillow blocks) incorporating tapered rollers, with or without spindles, whether or not for automotive use. These products are currently classifiable under Harmonized Tariff Schedule of the United States (HTSUS) item numbers 8482.20.00, 8482.91.0050, 8482.99.15, 8482.99.45, 8483.20.40, 8483.20.80, 8483.30.80, 8483.90.20, 8483.90.30, 8483.90.80, 8708.70.6060, 8708.99.2300, 8708.99.4850, 8708.99.6890, 8708.99.8115 and, 8708.99.8180. Although the HTSUS item numbers are provided for convenience and customs purposes, the 2 See Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, From the People’s Republic of China: Final Results of Antidumping Duty Administrative Review and Revocation in Part of Antidumping Duty Order, 62 FR 6189, 6214 (February 11, 1997). 3 Hereinafter, we refer to the post-merger company as SGBC/SKF and the pre-merger entity as SGBC. 4 See Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, From the People’s Republic of China: Initiation of Antidumping Duty Changed Circumstances Review, 78 FR 38943 (June 28, 2013). E:\FR\FM\21NON1.SGM 21NON1

Agencies

[Federal Register Volume 79, Number 225 (Friday, November 21, 2014)]
[Notices]
[Page 69424]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-27676]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[S-143-2014]


Foreign-Trade Zone 246--Waco, Texas; Application for Subzone; 
Spenco Medical Corporation; Waco, Texas

    An application has been submitted to the Foreign-Trade Zones Board 
(the Board) by the City of Waco, grantee of FTZ 246, requesting subzone 
status for the facility of Spenco Medical Corporation, located in Waco, 
Texas. The application was submitted pursuant to the provisions of the 
Foreign-Trade Zones Act, as amended (19 U.S.C. 81a-81u), and the 
regulations of the Board (15 CFR part 400). It was formally docketed on 
November 17, 2014.
    The proposed subzone (12.9 acres) is located at 6301 Imperial Drive 
in Waco. The proposed subzone would be subject to the existing 
activation limit of FTZ 246. No authorization for production activity 
has been requested at this time.
    In accordance with the Board's regulations, Camille Evans of the 
FTZ Staff is designated examiner to review the application and make 
recommendations to the Executive Secretary.
    Public comment is invited from interested parties. Submissions 
shall be addressed to the Board's Executive Secretary at the address 
below. The closing period for their receipt is December 31, 2014. 
Rebuttal comments in response to material submitted during the 
foregoing period may be submitted during the subsequent 15-day period 
to January 15, 2015.
    A copy of the application will be available for public inspection 
at the Office of the Executive Secretary, Foreign-Trade Zones Board, 
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., 
Washington, DC 20230-0002, and in the ``Reading Room'' section of the 
Board's Web site, which is accessible via www.trade.gov/ftz.
    For further information, contact Camille Evans at 
Camille.Evans@trade.gov or (202) 482-2350.

    Dated: November 17, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014-27676 Filed 11-20-14; 8:45 am]
BILLING CODE 3510-DS-P