Foreign-Trade Zone (FTZ) 283-Jackson, TN, Notification of Proposed Production Activity, MAT Industries, LLC, (Air Compressors), Jackson, TN, 64167-64168 [2014-25636]

Download as PDF Federal Register / Vol. 79, No. 208 / Tuesday, October 28, 2014 / Notices 64167 LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT ASSISTANCE— Continued [10/20/2014 through 10/22/2014] Date accepted for investigation Firm name Firm address Rietech Global, LLC ....................... 3700 Singer Blvd. NE., Suite A, Albuquerque, NM 87109. 10/20/2014 Rio Chan Foods, LLC .................... 2701 Broadway NE., Suite A, Albuquerque, NM 87107. 7501 Dahlia Street, Commerce City, CO 80022. 10246 Reisterstown Road, Owings Mill, PA 21117. 899 N. Centennial Avenue, West Fork, AR 72774. 468 Armour Drive, Atlanta, GA 30324. 10/20/2014 Precise Cast Prototypes & Engineering, Inc. Lion Brothers Company, Inc .......... Olson Companies, Inc. dba A&B Accessories. Shelley Kyle Inc ............................. Any party having a substantial interest in these proceedings may request a public hearing on the matter. A written request for a hearing must be submitted to the Trade Adjustment Assistance for Firms Division, Room 71030, Economic Development Administration, U.S. Department of Commerce, Washington, DC 20230, no later than ten (10) calendar days following publication of this notice. Please follow the requirements set forth in EDA’s regulations at 13 CFR 315.9 for procedures to request a public hearing. The Catalog of Federal Domestic Assistance official number and title for the program under which these petitions are submitted is 11.313, Trade Adjustment Assistance for Firms. Dated: October 22, 2014. Michael DeVillo, Eligibility Examiner. [FR Doc. 2014–25579 Filed 10–27–14; 8:45 am] BILLING CODE 3510–WH–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–45–2014] 10/21/2014 10/21/2014 10/22/2014 10/22/2014 1. The annual volume of foreign microdenier suede upholstery fabric finished with a caustic soda solution that may be admitted to the subzone under nonprivileged foreign status (19 CFR 146.42) is limited to 6.0 million square yards. 2. Southern Motion, Inc., must admit all foreign upholstery fabrics other than microdenier suede upholstery fabrics finished with a caustic soda solution to the subzone under domestic (duty-paid) status (19 CFR 146.43). 3. Southern Motion, Inc., shall submit supplemental annual report data and information for the purpose of monitoring by the FTZ Staff. 4. The authority for Southern Motion, Inc., shall remain in effect for a period of five years from the date of approval by the FTZ Board. asabaliauskas on DSK4SPTVN1PROD with NOTICES Dated: October 20, 2014. Andrew McGilvray, Executive Secretary. On June 20, 2014, the Greater Mississippi Foreign-Trade Zone, Inc., grantee of FTZ 158, submitted a notification of proposed production activity to the Foreign-Trade Zones (FTZ) Board on behalf of Southern Motion, Inc., within Subzone 158G, in Pontotoc and Baldwyn, Mississippi. The notification was processed in accordance with the regulations of the BILLING CODE 3510–DS–P 20:06 Oct 27, 2014 Jkt 235001 The firm manufactures electro-mechanical motion control systems used for search, navigation, and surveillance. The firm manufactures bread, pastry, cakes, and other bakery goods. The firm manufactures aluminum castings to be machined. The firm manufactures embroidered patches and emblems. The firm manufactures custom spa, patio and outdoor kitchen wood accessories. The firm manufactures fragrances and toiletries; the primary manufacturing material is essential oil. FTZ Board (15 CFR part 400), including notice in the Federal Register inviting public comment (79 FR 37281–37282, 7–1–2014). The FTZ Board has determined that no further review of the activity is warranted at this time. The production activity described in the notification is authorized, subject to the FTZ Act and the FTZ Board’s regulations, including Section 400.14, and the following restrictions and conditions: Authorization of Production Activity, Foreign-Trade Subzone 158G, Southern Motion, Inc. (Upholstered Furniture), Pontotoc and Baldwyn, MS VerDate Sep<11>2014 Product(s) [FR Doc. 2014–25642 Filed 10–27–14; 8:45 am] PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–74–2014] Foreign-Trade Zone (FTZ) 283— Jackson, TN, Notification of Proposed Production Activity, MAT Industries, LLC, (Air Compressors), Jackson, TN MAT Industries, LLC (MAT), an operator of FTZ 283, submitted a notification of proposed production activity to the FTZ Board for its facility located in Jackson, Tennessee within FTZ 283. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on October 14, 2014. The MAT facility is located within Site 11 of FTZ 283. The facility is used for the production of air compressors and related tanks. Pursuant to 15 CFR 400.14(b), FTZ authority would be limited to the specific foreign-status components and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt MAT from customs duty payments on the foreign status components used in export production. On its domestic sales, MAT would be able to choose the duty rate during customs entry procedures that applies to air compressors and tanks (free) for the foreign status components noted below. Customs duties also could possibly be deferred or reduced on foreign status production equipment. The components sourced from abroad include: Rubber gaskets; cardboard boxes; paper cards/manuals/labels; cloth bags; plastic tubes; ceramic nozzles; cast iron fittings/washers; zinc E:\FR\FM\28OCN1.SGM 28OCN1 64168 Federal Register / Vol. 79, No. 208 / Tuesday, October 28, 2014 / Notices connectors; brass nut sleeves; copper nuts; nickel fittings; aluminum couplers; engines; air filters; spray guns; pressure switches; body/check valves; regulators; bearing carriers; AC motors; capacitors; thermal overload wire kits; power cords and accessories; pressure gauges; stainless steel reducers/ bushings/plugs/nipples; non-alloy steel weld flanges; cast iron nipples/ bushings/reducers/plugs; copper washers/flywheels; brass fittings/ reducers; compressor parts; barrel screws; hydraulic assemblies; filter regulators and assemblies; valve assemblies; relief valves; pulleys; flywheels; cylinder heads and plates; steel bushings/valves; iron/steel assemblies; inflators; PVC air hoses; plastic clamshells/handles/hubcaps/Vbelts; rubber wheels; sandblasters; carry tanks; nailers; air drills; grinding stone sets; tool display bars; electrical pumps; pistons; impact sockets; chisel sets; ball bearings; crankshafts; sanders; and, pneumatic needle scalers (duty rate ranges from free to 6.5%). Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary at the address below. The closing period for their receipt is December 8, 2014. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the FTZ Board’s Web site, which is accessible via www.trade.gov/ftz. FOR FURTHER INFORMATION CONTACT: Pierre Duy at Pierre.Duy@trade.gov (202) 482–1378. Dated: October 20, 2014. Andrew McGilvray, Executive Secretary. [FR Doc. 2014–25636 Filed 10–27–14; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board asabaliauskas on DSK4SPTVN1PROD with NOTICES [B–75–2014] Foreign-Trade Zone (FTZ) 119— Minneapolis, Minnesota; Notification of Proposed Production Activity; MAT Industries, LLC; (Air Compressors and Pressure Washers); Springfield, Minnesota MAT Industries, LLC (MAT), an operator of FTZ 119, submitted a notification of proposed production VerDate Sep<11>2014 20:06 Oct 27, 2014 Jkt 235001 activity to the FTZ Board for its facility located in Springfield, Minnesota. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on October 14, 2014. The MAT facility is located at 118 West Rock Street, Springfield, Minnesota. A separate application for subzone designation at the MAT facility has been submitted and will be processed under Section 400.25 of the FTZ Board’s regulations. The facility is used for the production of air compressors, air compressor tanks, and pressure washers. Pursuant to 15 CFR 400.14(b), FTZ authority would be limited to the specific foreign-status components and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt MAT from customs duty payments on the foreign status components used in export production. On its domestic sales, MAT would be able to choose the duty rate during customs entry procedures that applies to air compressors, air compressor tanks, and pressure washers (free) for the foreign status components noted below. Customs duties also could possibly be deferred or reduced on foreign status production equipment. The components sourced from abroad include: Rubber gaskets; cardboard boxes; paper cards/manuals/labels; cloth bags; plastic tubes; ceramic nozzles; cast iron fittings/washers; zinc connectors; brass nut sleeves; copper nuts; nickel fittings; aluminum couplers; engines; air filters; spray guns; pressure switches; body/check valves; regulators; bearing carriers; AC motors; capacitors; thermal overload wires; power cords and accessories; pressure gauges; stainless steel reducers/ bushings/plugs/nipples; non-alloy steel weld flanges; cast iron nipples/ bushings/reducers/plugs; copper washers/flywheels; brass fittings/ reducers; compressor parts; barrel screws; hydraulic assemblies; filter regulators and assemblies; valve assemblies; relief valves; pulleys; flywheels; cylinder heads and plates; steel bushings/valves; iron/steel assemblies; inflators; PVC air hoses; plastic clamshells/handles/hubcaps/Vbelts; rubber wheels; sandblasters; carry tanks; nailers; air drills; grinding stone sets; tool display bars; electrical pumps; pistons; impact sockets; chisel sets; ball bearings; crankshafts; sanders; and, pneumatic needle scalers (duty rate ranges from free to 6.5%). PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary at the address below. The closing period for their receipt is December 8, 2014. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the FTZ Board’s Web site, which is accessible via www.trade.gov/ftz. FOR FURTHER INFORMATION CONTACT: Pierre Duy at Pierre.Duy@trade.gov (202) 482–1378. Dated: October 20, 2014. Andrew McGilvray, Executive Secretary. [FR Doc. 2014–25633 Filed 10–27–14; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–76–2014] Foreign-Trade Zone (FTZ) 45— Portland, OR, Proposed Revision to Production Authority, Epson Portland, Inc., Subzone 45F, (Inkjet Cartridges and Bulk Ink), Hillsboro, OR Epson Portland, Inc. (EPI) submitted a notification to the FTZ Board that proposes a revision to existing production authority for EPI’s facility in Hillsboro, Oregon, within Subzone 45F. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on October 20, 2014. EPI already has authority to produce inkjet ink cartridges and bulk ink (with restrictions) within Subzone 45F (Board Order 1406, 70 FR 55106, 9/20/2005; A(32(b)–3–2011, 77 FR 17409, 3/26/ 2012; and Board Order 1945, 79 FR 47615, 8/14/2014). EPI has authority to produce inkjet cartridges from certain non-privileged foreign status (NPF) ink components (Board Order 1945) while it has authority to produce bulk ink from certain privileged foreign (PF) status components (A(32b)–3–2011). EPI’s notification indicates that the bulk ink that it produces (for export) involves some of the same foreign materials and components as its inkjet cartridge production. In the current request, EPI seeks to admit these components to the subzone in NPF status for use in the bulk ink production and to subsequently place the finished bulk ink E:\FR\FM\28OCN1.SGM 28OCN1

Agencies

[Federal Register Volume 79, Number 208 (Tuesday, October 28, 2014)]
[Notices]
[Pages 64167-64168]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-25636]


-----------------------------------------------------------------------

 DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-74-2014]


Foreign-Trade Zone (FTZ) 283--Jackson, TN, Notification of 
Proposed Production Activity, MAT Industries, LLC, (Air Compressors), 
Jackson, TN

    MAT Industries, LLC (MAT), an operator of FTZ 283, submitted a 
notification of proposed production activity to the FTZ Board for its 
facility located in Jackson, Tennessee within FTZ 283. The notification 
conforming to the requirements of the regulations of the FTZ Board (15 
CFR 400.22) was received on October 14, 2014.
    The MAT facility is located within Site 11 of FTZ 283. The facility 
is used for the production of air compressors and related tanks. 
Pursuant to 15 CFR 400.14(b), FTZ authority would be limited to the 
specific foreign-status components and specific finished products 
described in the submitted notification (as described below) and 
subsequently authorized by the FTZ Board.
    Production under FTZ procedures could exempt MAT from customs duty 
payments on the foreign status components used in export production. On 
its domestic sales, MAT would be able to choose the duty rate during 
customs entry procedures that applies to air compressors and tanks 
(free) for the foreign status components noted below. Customs duties 
also could possibly be deferred or reduced on foreign status production 
equipment.
    The components sourced from abroad include: Rubber gaskets; 
cardboard boxes; paper cards/manuals/labels; cloth bags; plastic tubes; 
ceramic nozzles; cast iron fittings/washers; zinc

[[Page 64168]]

connectors; brass nut sleeves; copper nuts; nickel fittings; aluminum 
couplers; engines; air filters; spray guns; pressure switches; body/
check valves; regulators; bearing carriers; AC motors; capacitors; 
thermal overload wire kits; power cords and accessories; pressure 
gauges; stainless steel reducers/bushings/plugs/nipples; non-alloy 
steel weld flanges; cast iron nipples/bushings/reducers/plugs; copper 
washers/flywheels; brass fittings/reducers; compressor parts; barrel 
screws; hydraulic assemblies; filter regulators and assemblies; valve 
assemblies; relief valves; pulleys; flywheels; cylinder heads and 
plates; steel bushings/valves; iron/steel assemblies; inflators; PVC 
air hoses; plastic clamshells/handles/hubcaps/V-belts; rubber wheels; 
sandblasters; carry tanks; nailers; air drills; grinding stone sets; 
tool display bars; electrical pumps; pistons; impact sockets; chisel 
sets; ball bearings; crankshafts; sanders; and, pneumatic needle 
scalers (duty rate ranges from free to 6.5%).
    Public comment is invited from interested parties. Submissions 
shall be addressed to the FTZ Board's Executive Secretary at the 
address below. The closing period for their receipt is December 8, 
2014.
    A copy of the notification will be available for public inspection 
at the Office of the Executive Secretary, Foreign-Trade Zones Board, 
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., 
Washington, DC 20230-0002, and in the ``Reading Room'' section of the 
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.

For Further Information Contact: Pierre Duy at Pierre.Duy@trade.gov 
(202) 482-1378.

    Dated: October 20, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014-25636 Filed 10-27-14; 8:45 am]
BILLING CODE 3510-DS-P