Foreign-Trade Zone (FTZ) 119-Minneapolis, Minnesota; Notification of Proposed Production Activity; MAT Industries, LLC; (Air Compressors and Pressure Washers); Springfield, Minnesota, 64168 [2014-25633]
Download as PDF
<![CDATA[
64168
Federal Register / Vol. 79, No. 208 / Tuesday, October 28, 2014 / Notices
connectors; brass nut sleeves; copper
nuts; nickel fittings; aluminum
couplers; engines; air filters; spray guns;
pressure switches; body/check valves;
regulators; bearing carriers; AC motors;
capacitors; thermal overload wire kits;
power cords and accessories; pressure
gauges; stainless steel reducers/
bushings/plugs/nipples; non-alloy steel
weld flanges; cast iron nipples/
bushings/reducers/plugs; copper
washers/flywheels; brass fittings/
reducers; compressor parts; barrel
screws; hydraulic assemblies; filter
regulators and assemblies; valve
assemblies; relief valves; pulleys;
flywheels; cylinder heads and plates;
steel bushings/valves; iron/steel
assemblies; inflators; PVC air hoses;
plastic clamshells/handles/hubcaps/Vbelts; rubber wheels; sandblasters; carry
tanks; nailers; air drills; grinding stone
sets; tool display bars; electrical pumps;
pistons; impact sockets; chisel sets; ball
bearings; crankshafts; sanders; and,
pneumatic needle scalers (duty rate
ranges from free to 6.5%).
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is
December 8, 2014.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
FOR FURTHER INFORMATION CONTACT:
Pierre Duy at Pierre.Duy@trade.gov
(202) 482–1378.
Dated: October 20, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014–25636 Filed 10–27–14; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
asabaliauskas on DSK4SPTVN1PROD with NOTICES
[B–75–2014]
Foreign-Trade Zone (FTZ) 119—
Minneapolis, Minnesota; Notification of
Proposed Production Activity; MAT
Industries, LLC; (Air Compressors and
Pressure Washers); Springfield,
Minnesota
MAT Industries, LLC (MAT), an
operator of FTZ 119, submitted a
notification of proposed production
VerDate Sep<11>2014
20:06 Oct 27, 2014
Jkt 235001
activity to the FTZ Board for its facility
located in Springfield, Minnesota. The
notification conforming to the
requirements of the regulations of the
FTZ Board (15 CFR 400.22) was
received on October 14, 2014.
The MAT facility is located at 118
West Rock Street, Springfield,
Minnesota. A separate application for
subzone designation at the MAT facility
has been submitted and will be
processed under Section 400.25 of the
FTZ Board’s regulations. The facility is
used for the production of air
compressors, air compressor tanks, and
pressure washers. Pursuant to 15 CFR
400.14(b), FTZ authority would be
limited to the specific foreign-status
components and specific finished
products described in the submitted
notification (as described below) and
subsequently authorized by the FTZ
Board.
Production under FTZ procedures
could exempt MAT from customs duty
payments on the foreign status
components used in export production.
On its domestic sales, MAT would be
able to choose the duty rate during
customs entry procedures that applies to
air compressors, air compressor tanks,
and pressure washers (free) for the
foreign status components noted below.
Customs duties also could possibly be
deferred or reduced on foreign status
production equipment.
The components sourced from abroad
include: Rubber gaskets; cardboard
boxes; paper cards/manuals/labels;
cloth bags; plastic tubes; ceramic
nozzles; cast iron fittings/washers; zinc
connectors; brass nut sleeves; copper
nuts; nickel fittings; aluminum
couplers; engines; air filters; spray guns;
pressure switches; body/check valves;
regulators; bearing carriers; AC motors;
capacitors; thermal overload wires;
power cords and accessories; pressure
gauges; stainless steel reducers/
bushings/plugs/nipples; non-alloy steel
weld flanges; cast iron nipples/
bushings/reducers/plugs; copper
washers/flywheels; brass fittings/
reducers; compressor parts; barrel
screws; hydraulic assemblies; filter
regulators and assemblies; valve
assemblies; relief valves; pulleys;
flywheels; cylinder heads and plates;
steel bushings/valves; iron/steel
assemblies; inflators; PVC air hoses;
plastic clamshells/handles/hubcaps/Vbelts; rubber wheels; sandblasters; carry
tanks; nailers; air drills; grinding stone
sets; tool display bars; electrical pumps;
pistons; impact sockets; chisel sets; ball
bearings; crankshafts; sanders; and,
pneumatic needle scalers (duty rate
ranges from free to 6.5%).
PO 00000
Frm 00006
Fmt 4703
Sfmt 4703
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is
December 8, 2014.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
FOR FURTHER INFORMATION CONTACT:
Pierre Duy at Pierre.Duy@trade.gov
(202) 482–1378.
Dated: October 20, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014–25633 Filed 10–27–14; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–76–2014]
Foreign-Trade Zone (FTZ) 45—
Portland, OR, Proposed Revision to
Production Authority, Epson Portland,
Inc., Subzone 45F, (Inkjet Cartridges
and Bulk Ink), Hillsboro, OR
Epson Portland, Inc. (EPI) submitted a
notification to the FTZ Board that
proposes a revision to existing
production authority for EPI’s facility in
Hillsboro, Oregon, within Subzone 45F.
The notification conforming to the
requirements of the regulations of the
FTZ Board (15 CFR 400.22) was
received on October 20, 2014.
EPI already has authority to produce
inkjet ink cartridges and bulk ink (with
restrictions) within Subzone 45F (Board
Order 1406, 70 FR 55106, 9/20/2005;
A(32(b)–3–2011, 77 FR 17409, 3/26/
2012; and Board Order 1945, 79 FR
47615, 8/14/2014). EPI has authority to
produce inkjet cartridges from certain
non-privileged foreign status (NPF) ink
components (Board Order 1945) while it
has authority to produce bulk ink from
certain privileged foreign (PF) status
components (A(32b)–3–2011). EPI’s
notification indicates that the bulk ink
that it produces (for export) involves
some of the same foreign materials and
components as its inkjet cartridge
production. In the current request, EPI
seeks to admit these components to the
subzone in NPF status for use in the
bulk ink production and to
subsequently place the finished bulk ink
E:\FR\FM\28OCN1.SGM
28OCN1
]]>Agencies
[Federal Register Volume 79, Number 208 (Tuesday, October 28, 2014)]
[Notices]
[Page 64168]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-25633]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-75-2014]
Foreign-Trade Zone (FTZ) 119--Minneapolis, Minnesota;
Notification of Proposed Production Activity; MAT Industries, LLC; (Air
Compressors and Pressure Washers); Springfield, Minnesota
MAT Industries, LLC (MAT), an operator of FTZ 119, submitted a
notification of proposed production activity to the FTZ Board for its
facility located in Springfield, Minnesota. The notification conforming
to the requirements of the regulations of the FTZ Board (15 CFR 400.22)
was received on October 14, 2014.
The MAT facility is located at 118 West Rock Street, Springfield,
Minnesota. A separate application for subzone designation at the MAT
facility has been submitted and will be processed under Section 400.25
of the FTZ Board's regulations. The facility is used for the production
of air compressors, air compressor tanks, and pressure washers.
Pursuant to 15 CFR 400.14(b), FTZ authority would be limited to the
specific foreign-status components and specific finished products
described in the submitted notification (as described below) and
subsequently authorized by the FTZ Board.
Production under FTZ procedures could exempt MAT from customs duty
payments on the foreign status components used in export production. On
its domestic sales, MAT would be able to choose the duty rate during
customs entry procedures that applies to air compressors, air
compressor tanks, and pressure washers (free) for the foreign status
components noted below. Customs duties also could possibly be deferred
or reduced on foreign status production equipment.
The components sourced from abroad include: Rubber gaskets;
cardboard boxes; paper cards/manuals/labels; cloth bags; plastic tubes;
ceramic nozzles; cast iron fittings/washers; zinc connectors; brass nut
sleeves; copper nuts; nickel fittings; aluminum couplers; engines; air
filters; spray guns; pressure switches; body/check valves; regulators;
bearing carriers; AC motors; capacitors; thermal overload wires; power
cords and accessories; pressure gauges; stainless steel reducers/
bushings/plugs/nipples; non-alloy steel weld flanges; cast iron
nipples/bushings/reducers/plugs; copper washers/flywheels; brass
fittings/reducers; compressor parts; barrel screws; hydraulic
assemblies; filter regulators and assemblies; valve assemblies; relief
valves; pulleys; flywheels; cylinder heads and plates; steel bushings/
valves; iron/steel assemblies; inflators; PVC air hoses; plastic
clamshells/handles/hubcaps/V-belts; rubber wheels; sandblasters; carry
tanks; nailers; air drills; grinding stone sets; tool display bars;
electrical pumps; pistons; impact sockets; chisel sets; ball bearings;
crankshafts; sanders; and, pneumatic needle scalers (duty rate ranges
from free to 6.5%).
Public comment is invited from interested parties. Submissions
shall be addressed to the FTZ Board's Executive Secretary at the
address below. The closing period for their receipt is December 8,
2014.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.
FOR FURTHER INFORMATION CONTACT: Pierre Duy at Pierre.Duy@trade.gov
(202) 482-1378.
Dated: October 20, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014-25633 Filed 10-27-14; 8:45 am]
BILLING CODE 3510-DS-P
