Bureau of Industry and Security, 61050 [2014-24082]

Download as PDF 61050 Federal Register / Vol. 79, No. 196 / Thursday, October 9, 2014 / Notices DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–70–2014] mstockstill on DSK4VPTVN1PROD with NOTICES Foreign-Trade Zone 40—Cleveland, Ohio, Application for Reorganization, (Expansion of Service Area) Under Alternative Site Framework An application has been submitted to the Foreign-Trade Zones (FTZ) Board by the Cleveland Cuyahoga County Port Authority, grantee of Foreign-Trade Zone 40, requesting authority to reorganize the zone to expand its service area under the alternative site framework (ASF) adopted by the FTZ Board (15 CFR 400.2(c)). The ASF is an option for grantees for the establishment or reorganization of zones and can permit significantly greater flexibility in the designation of new subzones or ‘‘usage-driven’’ FTZ sites for operators/ users located within a grantee’s ‘‘service area’’ in the context of the FTZ Board’s standard 2,000-acre activation limit for a zone. The application was submitted pursuant to the Foreign-Trade Zones Act, as amended (19 U.S.C. 81a-81u), and the regulations of the FTZ Board (15 CFR part 400). It was formally docketed on October 1, 2014. FTZ 40 was approved by the FTZ Board on September 29, 1978 (Board Order 135, 43 FR 46886, 10/11/1978) and reorganized under the ASF on September 17, 2013 (Board Order 1916, 78 FR 59650, 9/27/2013). The zone currently has a service area that includes Cuyahoga, Geauga and Lorain Counties, Ohio. The applicant is now requesting authority to expand the service area of the zone to include Lake County, Ohio, as described in the application. If approved, the grantee would be able to serve sites throughout the expanded service area based on companies’ needs for FTZ designation. The proposed expanded service area is adjacent to the Cleveland Customs and Border Protection Port of Entry In accordance with the FTZ Board’s regulations, Elizabeth Whiteman of the FTZ Staff is designated examiner to evaluate and analyze the facts and information presented in the application and case record and to report findings and recommendations to the FTZ Board. Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary at the address below. The closing period for their receipt is December 8, 2014. Rebuttal comments in response to material submitted during the foregoing period may be VerDate Sep<11>2014 17:56 Oct 08, 2014 Jkt 235001 submitted during the subsequent 15-day period to December 23, 2014. A copy of the application will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the FTZ Board’s Web site, which is accessible via www.trade.gov/ftz. FOR FURTHER INFORMATION CONTACT: Elizabeth Whiteman at Elizabeth.Whiteman@trade.gov or (202) 482–0473. Dated: October 1, 2014. Andrew McGilvray, Executive Secretary. [FR Doc. 2014–24090 Filed 10–8–14; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on October 28, 2014, 9:30 a.m., in the Herbert C. Hoover Building, Room 3884, 14th Street between Constitution and Pennsylvania Avenues NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration on technical questions that affect the level of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public Session 1. Welcome and Introductions. 2. Remarks from the Bureau of Industry and Security Management. 3. Industry Presentations. 4. New Business. Closed Session 5. Discussion of matters determined to be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). The open session will be accessible via teleconference to 20 participants on a first come, first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@ bis.doc.gov no later than October 21, 2014. A limited number of seats will be available during the public session of the meeting. Reservations are not PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 accepted. To the extent that time permits, members of the public may present oral statements to the Committee. The public may submit written statements at any time before or after the meeting. However, to facilitate distribution of public presentation materials to the Committee members, the Committee suggests that the materials be forwarded before the meeting to Ms. Springer. The Assistant Secretary for Administration, with the concurrence of the General Counsel, formally determined on September 23, 2013 pursuant to Section 10(d) of the Federal Advisory Committee Act, as amended (5 U.S.C. app. 2 § 10(d), that the portion of this meeting dealing with pre-decisional changes to the Commerce Control List and U.S. export control policies shall be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). The remaining portions of the meeting will be open to the public. For more information contact Yvette Springer on (202) 482–2813. Dated: October 3, 2014. Yvette Springer, Committee Liaison Officer. [FR Doc. 2014–24082 Filed 10–8–14; 8:45 am] BILLING CODE P DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical Advisory Committee (MPETAC) will meet on October 29, 2014, 9:00 a.m., Room 3884, in the Herbert C. Hoover Building, 14th Street between Pennsylvania and Constitution Avenues NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration with respect to technical questions that affect the level of export controls applicable to materials processing equipment and related technology. Agenda Open Session: 1. Opening remarks and introductions. 2. Presentation of papers and comments by the Public. 3. Discussions on results from last, and proposals from last Wassenaar meeting. E:\FR\FM\09OCN1.SGM 09OCN1

Agencies

[Federal Register Volume 79, Number 196 (Thursday, October 9, 2014)]
[Notices]
[Page 61050]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-24082]


-----------------------------------------------------------------------

 DEPARTMENT OF COMMERCE


Bureau of Industry and Security

Sensors and Instrumentation Technical Advisory Committee; Notice 
of Partially Closed Meeting

    The Sensors and Instrumentation Technical Advisory Committee 
(SITAC) will meet on October 28, 2014, 9:30 a.m., in the Herbert C. 
Hoover Building, Room 3884, 14th Street between Constitution and 
Pennsylvania Avenues NW., Washington, DC. The Committee advises the 
Office of the Assistant Secretary for Export Administration on 
technical questions that affect the level of export controls applicable 
to sensors and instrumentation equipment and technology.

Agenda

Public Session

    1. Welcome and Introductions.
    2. Remarks from the Bureau of Industry and Security Management.
    3. Industry Presentations.
    4. New Business.

Closed Session

    5. Discussion of matters determined to be exempt from the 
provisions relating to public meetings found in 5 U.S.C. app. 2 
Sec. Sec.  10(a)(1) and 10(a)(3).
    The open session will be accessible via teleconference to 20 
participants on a first come, first serve basis. To join the 
conference, submit inquiries to Ms. Yvette Springer at 
Yvette.Springer@bis.doc.gov no later than October 21, 2014.
    A limited number of seats will be available during the public 
session of the meeting. Reservations are not accepted. To the extent 
that time permits, members of the public may present oral statements to 
the Committee. The public may submit written statements at any time 
before or after the meeting. However, to facilitate distribution of 
public presentation materials to the Committee members, the Committee 
suggests that the materials be forwarded before the meeting to Ms. 
Springer.
    The Assistant Secretary for Administration, with the concurrence of 
the General Counsel, formally determined on September 23, 2013 pursuant 
to Section 10(d) of the Federal Advisory Committee Act, as amended (5 
U.S.C. app. 2 Sec.  10(d), that the portion of this meeting dealing 
with pre-decisional changes to the Commerce Control List and U.S. 
export control policies shall be exempt from the provisions relating to 
public meetings found in 5 U.S.C. app. 2 Sec. Sec.  10(a)(1) and 
10(a)(3). The remaining portions of the meeting will be open to the 
public.
    For more information contact Yvette Springer on (202) 482-2813.

    Dated: October 3, 2014.
Yvette Springer,
Committee Liaison Officer.
[FR Doc. 2014-24082 Filed 10-8-14; 8:45 am]
BILLING CODE P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.