Certain New Chemicals; Receipt and Status Information, 60154-60157 [2014-23772]

Download as PDF 60154 Federal Register / Vol. 79, No. 193 / Monday, October 6, 2014 / Notices amount in contract revisions. Each annual installment pays the amortized portion of the United States’ investment in the Deer Creek hydroelectric facilities with interest and the associated operation, maintenance, and administrative costs. This repayment schedule is not dependent upon the capacity and associated energy made available for sale each year. Thirty days after this notice is published, Western will take further action on the proposed formula rate extension for the Provo River Project, pursuant to the Delegation Order and DOE rate extension procedures at 10 CFR 903.23(a). Dated: September 26, 2014. Mark A. Gabriel, Administrator. [FR Doc. 2014–23773 Filed 10–3–14; 8:45 am] BILLING CODE 6450–01–P ENVIRONMENTAL PROTECTION AGENCY [EPA–HQ–OPPT–2014–0706; FRL–9917–18] Certain New Chemicals; Receipt and Status Information SUPPLEMENTARY INFORMATION: Environmental Protection Agency (EPA). ACTION: Notice. AGENCY: mstockstill on DSK4VPTVN1PROD with NOTICES I. General Information A. Does this action apply to me? EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from August 25, 2014 to September 15, 2014. DATES: Comments identified by the specific PMN number or TME number, must be received on or before November 5, 2014. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA–HQ–OPPT–2014–0706, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods: • Federal eRulemaking Portal: https:// www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. SUMMARY: VerDate Sep<11>2014 17:17 Oct 03, 2014 Jkt 235001 • Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460–0001. • Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at https:// www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at https://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Bernice Mudd, Information Management Division (7407), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460–0001; telephone number: (202) 564–8951; email address: Mudd.Bernice@epa.gov. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554– 1404; email address: TSCA-Hotline@ epa.gov. This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the PMNs addressed in this action. B. What should I consider as I prepare my comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD–ROM that you mail to EPA, mark the outside of the disk or CD–ROM as CBI and then identify electronically within the disk or CD–ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When submitting comments, remember to: PO 00000 Frm 00029 Fmt 4703 Sfmt 4703 i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number). ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number. iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes. iv. Describe any assumptions and provide any technical information and/ or data that you used. v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced. vi. Provide specific examples to illustrate your concerns and suggest alternatives. vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats. viii. Make sure to submit your comments by the comment period deadline identified. II. What action is the Agency taking? This document provides receipt and status reports, which cover the period from August 25, 2014 to September 15, 2014, and consists of the PMNs pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the Agency’s authority for taking this action? Section 5 of TSCA requires that EPA periodical publish in the Federal Register receipt and status reports, which cover the following EPA activities required by provisions of TSCA section 5. EPA classifies a chemical substance as either an ‘‘existing’’ chemical or a ‘‘new’’ chemical. Any chemical substance that is not on EPA’s TSCA Inventory is classified as a ‘‘new chemical,’’ while those that are on the TSCA Inventory are classified as an ‘‘existing chemical.’’ For more information about the TSCA Inventory go to: https://www.epa.gov/opptintr/ newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a nonexempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued E:\FR\FM\06OCN1.SGM 06OCN1 60155 Federal Register / Vol. 79, No. 193 / Monday, October 6, 2014 / Notices under TSCA section 5(a), for ‘‘test marketing’’ purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: https://www.epa.gov/ oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic status reports on the new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports In Table I. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: The EPA case number assigned to the PMN, the date the PMN was received by EPA, the projected end date for EPA’s review of the PMN, the submitting manufacturer/ importer, the potential uses identified by the manufacturer/importer in the PMN, and the chemical identity. TABLE I—37 PMNS RECEIVED FROM 8/25/14 TO 9/15/14 Case No. Received date Projected notice end date Manufacturer /importer Use Chemical (G) Epoxy-amine adduct, neutralized. (G) Aromatic diacid polymer with alkyl diacid, cycloalkyl dimethanol, alkyl diisocyanate, hydroxyalkyl acrylate blocked alkyl diisocyanate homopolymer, dihydroxyalkanoic acid, alkanediol, alkali metal salt, dialkanolamine-andhydroxyalkyl acrylate-and-polyalkyl glycol monoalkyl ether blocked. (G) Fluoroalkene. (G) Depolymerized waste plastics. P–14–0806 ... P–14–0807 ... 8/26/2014 8/26/2014 11/24/2014 11/24/2014 CBI .............. CBI .............. (G) Open, non-dispersive ................... (G) Reactive polymer for waterborne industrial coating & ink applications. P–14–0808 ... P–14–0809 ... 8/26/2014 8/26/2014 11/24/2014 11/24/2014 CBI .............. CBI .............. P–14–0810 ... 8/26/2014 11/24/2014 SEPPIC ....... P–14–0811 ... P–14–0812 ... 8/27/2014 8/27/2014 11/25/2014 11/25/2014 CBI .............. CBI .............. P–14–0813 ... P–14–0814 ... P–14–0822 ... 8/27/2014 8/27/2014 8/27/2014 11/25/2014 11/25/2014 11/25/2014 CBI .............. CBI .............. CBI .............. P–14–0817 ... 8/29/2014 11/27/2014 P–14–0818 ... P–14–0820 ... 8/29/2014 9/2/2014 11/27/2014 12/1/2014 Firmenich Incorporated. CBI .............. Allnex USA Inc. (G) Process intermediate ................... (S) Intermediate for use in the manufacture of polymers. (S) Hydrotrope agent and performance booster. (G) Lubricant additive ......................... (S) Floor coating; general architectural and industrial coatings. (G) Intermediate ................................. (G) Surface modification coating ........ (G) Resin additive designed to be added to existing systems improving overall mechanical properties. (G) As part of a fragrance formula ..... P–14–0821 ... 9/2/2014 12/1/2014 P–14–0823 ... 9/3/2014 12/2/2014 P–14–0824 ... 9/3/2014 P–14–0825 ... P–14–0827 ... (G) Adhesive for cellulosic surfaces .. (S) Industrial coating resin ................. (S) Intermediate for polymer production. 12/2/2014 CBI .............. 9/3/2014 9/3/2014 12/2/2014 12/2/2014 CBI .............. Baze Chemical Company. (G) Rape oil, reaction products with amines. (G) Paint additive ............................... (S) Diluted corrosion inhibitor/organic scale inhibitor intermediate. P–14–0827 ... mstockstill on DSK4VPTVN1PROD with NOTICES Industrial Speciality Chemicals. Allnex USA Inc. 9/3/2014 12/2/2014 Baze Chemical Company. (S) Organic scale inhibitor intermediate for oil field scale inhibition. P–14–0826 ... 9/3/2014 12/2/2014 Rhineland Specialties, Inc. (S) Binder in paints used for marine applications. P–14–0828 ... P–14–0829 ... 9/3/2014 9/4/2014 12/2/2014 12/3/2014 CBI .............. CBI .............. (S) Polymer intermediate ................... (S) Surfactant for use in paints, coatings, inks, waxes, detergents, polishes, adhesives, and lubricants. VerDate Sep<11>2014 17:17 Oct 03, 2014 Jkt 235001 PO 00000 Frm 00030 (S) Industrial Coating Resin ............... Fmt 4703 Sfmt 4703 E:\FR\FM\06OCN1.SGM (S) D-Glucoside, heptyl. (G) Sulfurized hydrocarbon. (G) Isocyanate terminated polyurethane. (G) Perfluoropolyether chlorosilane. (G) Perfluoropolyether methoxysilane. (G) Epoxycyclohexylmethylepoxycyclohexane carboxylate polymer with cyclohexlamine. (S) 3-hexenoic acid, cyclopropylmethyl ester. (G) Cross-linked biopolymer. (G) Formaldehyde, polymer with substituted carbomonocycles, alkyl ether. (G) Glycidyl trimethylammonium bromide. (G) Formaldehyde, polymer with substituted carbomonocycle, alkyl ether. (G) Rape oil, reaction products with alkylamine. (G) Amide wax. (S) Poly[oxy(methyl-1,2ethanediyl)],alpha-(2aminomethylethyl)-omega-(2aminomethylethoxy)-, phosphonomethylated, sodium salts. (S) Poly[oxy(methyl-1,2ethanediyl)],alpha-(2aminomethylethyl)-omega-(2aminomethylethoxy)-, phosphonomethylated, sodium salts. (G) Fatty acids, unsatd., polymers with hydroxy-terminated PH PR organosilica, alkylpolyhydroxide, aryl anhydride, and fatty acid. (G) Formamide, N-ethenyl-, polymer. (S) Pending Letter of Support. 06OCN1 60156 Federal Register / Vol. 79, No. 193 / Monday, October 6, 2014 / Notices TABLE I—37 PMNS RECEIVED FROM 8/25/14 TO 9/15/14—Continued Case No. Received date Projected notice end date Manufacturer /importer Use Chemical (S) 1-propanaminium, N,N,Ntrimethyl-3-[(2-methyl-1-oxo-2-propenyl)amino]-, chloride (1:1), polymer with 2-propenamide and 2-propenoic acid, sodium salt. (G) Fatty acids, polymers with acrylic monomers, bisphenol A, 2ethoxyethanol, epichlorohydrin and styrene, alkyl peroxide-initiated, compounds (cmpds) with triethylamine. (G) Fatty acids, polymers with acrylic monomers, bisphenol A, modified oil, epichlorohydrin and styrene, alkyl peroxide-initiated, cmpds. with triethylamine. (G) Epoxy-amine adduct, neutralized. (G) Polyfunctional carbodiimide. P–14–0830 ... 9/8/2014 12/7/2014 CBI .............. (G) Additve for household cleaners and products. P–14–0831 ... 9/8/2014 12/7/2014 CBI .............. (S) A binder for metal coating ............ P–14–0832 ... 9/8/2014 12/7/2014 CBI .............. (S) A binder resin for metal coating ... P–14–0833 ... P–14–0834 ... 9/8/2014 9/9/2014 12/7/2014 12/8/2014 CBI .............. CBI .............. P–14–0835 ... 9/11/2014 12/10/2014 CBI .............. P–14–0837 ... 9/12/2014 12/11/2014 Henkel Corporation. (G) Open, non-dispersive ................... (G) Component for plastic parts coating. (G) PMN substance is a component OF inkjet ink. (S) Hot melt adhesive and industrial bonding applications. P–14–0836 ... 9/12/2014 12/11/2014 Henkel Corporation. (S) Hot melt adhesive and industrial bonding applications. P–14–0838 ... 9/12/2014 12/11/2014 CBI .............. (G) Component for tire ....................... P–14–0840 ... 9/12/2014 12/11/2014 CBI .............. P–14–0841 ... 9/12/2014 12/11/2014 CBI .............. P–14–0842 ... P–14–0843 ... P–14–0844 ... 9/12/2014 9/15/2014 9/15/2014 12/11/2014 12/14/2014 12/14/2014 CBI .............. CBI .............. CBI .............. (G) Reactive hot melt adhesive for roll coating or spraying application to make panels for construction. (S) Fluorescent brightener for use in paper applications. (G) Polymerization monomer ............. (G) Laundry additive ........................... (G) Heat dissipation ........................... P–14–0845 ... 9/15/2014 12/14/2014 CBI .............. (G) Heat dissipation ........................... In Table II. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs received by EPA during this period: The EPA case number assigned to the NOC, the date (G) Alkyl carboxylic acid lithium salt. (S) Fatty acids, C18-unsaturated (unsat’d.), dimers, polymers with azelaic acid, ethylenediamine, hexamethylenediamine, piperazine, polyoxypropylene diamine and talloil fatty acids. (S) Fatty acids, C18-unsat’d., dimers, polymers with azelaic acid, ethylenediamine, piperazine, polypropylene glycol diamine and tall oil fatty acids*. (G) Modified copolymer of buta-1,3diene and styrene. (G) Silane cure reactive hot melt adhesive. (G) Triazinylaminostilbene. (G) Polycyclic hydrocarbon. (G) Alkoxylated glycerol ester. (G) Organosilane treated boron nitride. (G) Organosilane treated oxide ceramic. the NOC was received by EPA, the projected end date for EPA’s review of the NOC, and chemical identity. TABLE II—29 NOCS RECEIVED FROM 8/25/14 TO 9/15/14 Case no. Received date Commencement notice end date mstockstill on DSK4VPTVN1PROD with NOTICES P–01–0357 ... P–14–0539 ... 8/22/2014 8/22/2014 8/5/2014 8/6/2014 P–14–0540 ... 8/22/2014 8/6/2014 P–14–0052 P–14–0500 P–12–0573 P–14–0270 P–14–0289 8/25/2014 8/25/2014 8/26/2014 8/26/2014 8/26/2014 8/3/2014 8/21/2014 8/8/2014 8/18/2014 8/18/2014 ... ... ... ... ... VerDate Sep<11>2014 17:17 Oct 03, 2014 Jkt 235001 Chemical (G) N,N’ substituted aniline sulfonic acid, compound with 2,2’,2‘‘-nitrilotris [ethanol]. (G) Siloxanes and silicones, di-me, 3-(2-hydroxyethoxy)alkyl group-terminated, polymers with 1,4-alkanediol, di-et carbonate, alkene glycol, 1,6-alkanediol and 1,1-alkylenebis[4isocyanatocycloalkane]. (G) Siloxanes and silicones, di-me, 3-(2-hydroxyethoxy)alkyl group-terminated, polymers with 1,4-alkanediol, di-et carbonate, alkene glycol, 1,6-alkanediol and 1,1-alkylenebis[4isocyanatocycloalkane]. (G) Polymer modified multifunctional silane. (G) Butanedioic acid, compd. with polyalkylpolyaminoamidine. (G) Amine substitued quinoacridine product. (G) Multifunctional novolac type epoxy resin. (G) Multifunctional novolac type epoxy resin. PO 00000 Frm 00031 Fmt 4703 Sfmt 4703 E:\FR\FM\06OCN1.SGM 06OCN1 Federal Register / Vol. 79, No. 193 / Monday, October 6, 2014 / Notices 60157 TABLE II—29 NOCS RECEIVED FROM 8/25/14 TO 9/15/14—Continued Case no. Received date Commencement notice end date J–14–0017 ... P–12–0115 ... P–14–0143 ... 8/26/2014 8/27/2014 8/28/2014 8/19/2014 8/20/2014 8/20/2014 P–13–0907 P–12–0116 P–14–0487 P–14–0336 P–14–0417 P–14–0418 P–13–0919 P–14–0308 P–14–0447 P–14–0448 P–14–0556 P–13–0650 P–14–0547 P–14–0337 ... ... ... ... ... ... ... ... ... ... ... ... ... ... 8/28/2014 8/28/2014 8/29/2014 8/29/2014 9/2/2014 9/2/2014 9/2/2014 9/2/2014 9/4/2014 9/4/2014 9/5/2014 9/8/2014 9/9/2014 9/10/2014 8/25/2014 8/28/2014 8/5/2014 8/20/2014 8/26/2014 8/26/2014 8/30/2014 8/30/2014 8/9/2014 8/9/2014 8/21/2014 9/3/2014 9/5/2014 8/20/2014 P–14–0450 P–14–0504 P–08–0271 P–14–0566 ... ... ... ... 9/10/2014 9/11/2014 9/12/2014 9/15/2014 9/2/2014 9/3/2014 9/4/2014 9/6/2014 If you are interested in information that is not included in these tables, you may contact EPA as described in Unit III. to access additional non-CBI information that may be available. Authority: 15 U.S.C. 2601 et. seq. Dated: September 23, 2014. Chandler Sirmons, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2014–23772 Filed 10–3–14; 8:45 am] BILLING CODE 6560–50–P ENVIRONMENTAL PROTECTION AGENCY [FRL–9917–47–Region–9] Strategic Sciences Removal Site, Sylmar, CA; Notice of Proposed CERCLA Settlement Agreement for Recovery of Response Costs Environmental Protection Agency. ACTION: Notice; request for comment. In accordance with Section 122(i) of the Comprehensive Environmental Response, Compensation and Liability Act of 1980, as amended (CERCLA), 42 U.S.C. 9622(i), notice is hereby given of a proposed administrative settlement with two parties for recovery of response costs concerning the Strategic Sciences Superfund Site in Sylmar, California. The settlement is entered into pursuant mstockstill on DSK4VPTVN1PROD with NOTICES VerDate Sep<11>2014 17:17 Oct 03, 2014 Jkt 235001 (G) Modified microalgae. (G) Alkylbenzene sulfonic acid. (G) Alkanaminium, substituted carbomonocycle alkylamino)carbomonocycle]alkylene]-substituted carbomonocycle, carboxylate salt. (G) Epoxy resin, reaction products with alkanolamines. (G) Alkylbenzene sulfonate sodium salt. (G) Polyalkylaminoalkaryloxy, carboxylic acid, metal salt. (S) Dodecanedioic acid, polymer with 2,2-dimethyl-1,3-propanediol. (G) Aliphatic ether ethyl alcohol. (G) Styrene-methacrylate copolymer. (G) Glycerides, C14-C18, C16-C18 unsaturated, from algal fermentation. (G) Algal biomass from fermentation. (S) Alcohols, C18–22, distillation residues. (S) Alcohols, C12–22, distillation residues. (S) Oils, peach pulp. (G) Epoxy-amine adduct, neutralized. (G) Organometallic, reaction product with zirconium metallocene, silica, and aluminum alkyl. (S) Poly(oxy(methyl-1,2-ethanediyl)], -hydro—hydroxy-, polymer with 1,6-diisocyanatohexane and 1,1’-methylenebis[4-isocyanatocyclohexane], caprolactam- and polyethylene glycol mono-me ether-blocked. (G) Siliconate potassium. (G) Alkylated urethane copolymer. (S) Molybdenum, borate neodecanoate oxo complexes. (G) Disubstituted alkenal. to Section 122(h)(1) of CERCLA, 42 U.S.C. 9622(h)(1), and it requires the settling party to pay $40,000 to the United States Environmental Protection Agency (Agency). The settlement includes a covenant not to sue the settling party pursuant to Sections 106 or 107(a) of CERCLA, 42 U.S.C. 9606 or 9607(a). For thirty (30) days following the date of publication of this Notice in the Federal Register, the Agency will receive written comments relating to the settlement. The Agency will consider all comments received and may modify or withdraw its consent to the settlement if comments received disclose facts or considerations which indicate the proposed settlement is inappropriate, improper, or inadequate. The Agency’s response to any comments received will be available for public inspection at 75 Hawthorne Street, San Francisco, CA 94105. Comments must be submitted on or before November 5, 2014. ADDRESSES: The proposed settlement is available for public inspection at EPA Region IX, 75 Hawthorne Street, San Francisco, California. A copy of the proposed settlement may be obtained from J. Andrew Helmlinger, EPA Region IX, 75 Hawthorne Street, ORC–3, San Francisco, CA 94105, telephone number 415–972–3904. Comments should reference the Strategic Sciences Superfund Site, Sylmar, California, and should be addressed to J. Andrew Helmlinger at the above address. DATES: AGENCY: SUMMARY: Chemical PO 00000 Frm 00032 Fmt 4703 Sfmt 4703 J. Andrew Helmlinger, Assistant Regional Counsel (ORC–3), Office of Regional Counsel, U.S. EPA Region IX, 75 Hawthorne Street, San Francisco, CA 94105; phone: (415) 972–3904; fax: (417) 947–3570; email: helmlinger.andrew@ epa.gov. FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: Respondent to the Proposed Settlement: K&W Properties, Inc. Dated: September 25, 2014. Enrique Manzanilla, Director, Superfund Division, U.S. EPA, Region IX. [FR Doc. 2014–23816 Filed 10–3–14; 8:45 am] BILLING CODE 6560–50–P FEDERAL COMMUNICATIONS COMMISSION [3060–0855] Information Collection Being Submitted for Review and Approval to the Office of Management and Budget Federal Communications Commission. ACTION: Notice and request for comments. AGENCY: As part of its continuing effort to reduce paperwork burdens, and as required by the Paperwork Reduction Act (PRA) of 1995 (44 U.S.C. 3501– 3520), the Federal Communications Commission (FCC or Commission) SUMMARY: E:\FR\FM\06OCN1.SGM 06OCN1

Agencies

ENVIRONMENTAL PROTECTION AGENCY

[Federal Register Volume 79, Number 193 (Monday, October 6, 2014)]
[Notices]
[Pages 60154-60157]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-23772]

=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2014-0706; FRL-9917-18]

Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of notices
of commencement (NOC) to manufacture those chemicals. This document
covers the period from August 25, 2014 to September 15, 2014.

DATES: Comments identified by the specific PMN number or TME number,
must be received on or before November 5, 2014.

ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2014-0706, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.

FOR FURTHER INFORMATION CONTACT: For technical information contact:
Bernice Mudd, Information Management Division (7407), Office of
Pollution Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number:
(202) 564-8951; email address: Mudd.Bernice@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the PMNs addressed in this action.

B. What should I consider as I prepare my comments for EPA?

1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.

II. What action is the Agency taking?

This document provides receipt and status reports, which cover the
period from August 25, 2014 to September 15, 2014, and consists of the
PMNs pending and/or expired, and the NOCs to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period.

III. What is the Agency's authority for taking this action?

Section 5 of TSCA requires that EPA periodical publish in the
Federal Register receipt and status reports, which cover the following
EPA activities required by provisions of TSCA section 5.
EPA classifies a chemical substance as either an ``existing''
chemical or a ``new'' chemical. Any chemical substance that is not on
EPA's TSCA Inventory is classified as a ``new chemical,'' while those
that are on the TSCA Inventory are classified as an ``existing
chemical.'' For more information about the TSCA Inventory go to: https://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to
manufacture or import a new chemical substance for a non-exempt
commercial purpose is required by TSCA section 5 to provide EPA with a
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes
EPA to allow persons, upon application, to manufacture (includes
import) or process a new chemical substance, or a chemical substance
subject to a significant new use rule (SNUR) issued

[[Page 60155]]

under TSCA section 5(a), for ``test marketing'' purposes, which is
referred to as a test marketing exemption, or TME. For more information
about the requirements applicable to a new chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic status
reports on the new chemicals under review and the receipt of NOCs to
manufacture those chemicals.

IV. Receipt and Status Reports

In Table I. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: The EPA case number assigned to the
PMN, the date the PMN was received by EPA, the projected end date for
EPA's review of the PMN, the submitting manufacturer/importer, the
potential uses identified by the manufacturer/importer in the PMN, and
the chemical identity.

Table I--37 PMNs Received From 8/25/14 to 9/15/14
----------------------------------------------------------------------------------------------------------------
Projected
Case No. Received date notice end Manufacturer / Use Chemical
date importer
----------------------------------------------------------------------------------------------------------------
P-14-0806........ 8/26/2014 11/24/2014 CBI.............. (G) Open, non- (G) Epoxy-amine
dispersive. adduct,
neutralized.
P-14-0807........ 8/26/2014 11/24/2014 CBI.............. (G) Reactive polymer (G) Aromatic diacid
for waterborne polymer with alkyl
industrial coating diacid, cycloalkyl
& ink applications. dimethanol, alkyl
diisocyanate,
hydroxyalkyl
acrylate blocked
alkyl diisocyanate
homopolymer,
dihydroxyalkanoic
acid, alkanediol,
alkali metal salt,
dialkanolamine-and-
hydroxyalkyl
acrylate-and-
polyalkyl glycol
monoalkyl ether
blocked.
P-14-0808........ 8/26/2014 11/24/2014 CBI.............. (G) Process (G) Fluoroalkene.
intermediate.
P-14-0809........ 8/26/2014 11/24/2014 CBI.............. (S) Intermediate for (G) Depolymerized
use in the waste plastics.
manufacture of
polymers.
P-14-0810........ 8/26/2014 11/24/2014 SEPPIC........... (S) Hydrotrope agent (S) D-Glucoside,
and performance heptyl.
booster.
P-14-0811........ 8/27/2014 11/25/2014 CBI.............. (G) Lubricant (G) Sulfurized
additive. hydrocarbon.
P-14-0812........ 8/27/2014 11/25/2014 CBI.............. (S) Floor coating; (G) Isocyanate
general terminated
architectural and polyurethane.
industrial coatings.
P-14-0813........ 8/27/2014 11/25/2014 CBI.............. (G) Intermediate.... (G)
Perfluoropolyether
chlorosilane.
P-14-0814........ 8/27/2014 11/25/2014 CBI.............. (G) Surface (G)
modification Perfluoropolyether
coating. methoxysilane.
P-14-0822........ 8/27/2014 11/25/2014 CBI.............. (G) Resin additive (G)
designed to be Epoxycyclohexylmeth
added to existing yl-epoxycyclohexane
systems improving carboxylate polymer
overall mechanical with
properties. cyclohexlamine.
P-14-0817........ 8/29/2014 11/27/2014 Firmenich (G) As part of a (S) 3-hexenoic acid,
Incorporated. fragrance formula. cyclopropylmethyl
ester.
P-14-0818........ 8/29/2014 11/27/2014 CBI.............. (G) Adhesive for (G) Cross-linked
cellulosic surfaces. biopolymer.
P-14-0820........ 9/2/2014 12/1/2014 Allnex USA Inc... (S) Industrial (G) Formaldehyde,
coating resin. polymer with
substituted
carbomonocycles,
alkyl ether.
P-14-0821........ 9/2/2014 12/1/2014 Industrial (S) Intermediate for (G) Glycidyl
Speciality polymer production. trimethylammonium
Chemicals. bromide.
P-14-0823........ 9/3/2014 12/2/2014 Allnex USA Inc... (S) Industrial (G) Formaldehyde,
Coating Resin. polymer with
substituted
carbomonocycle,
alkyl ether.
P-14-0824........ 9/3/2014 12/2/2014 CBI.............. (G) Rape oil, (G) Rape oil,
reaction products reaction products
with amines. with alkylamine.
P-14-0825........ 9/3/2014 12/2/2014 CBI.............. (G) Paint additive.. (G) Amide wax.
P-14-0827........ 9/3/2014 12/2/2014 Baze Chemical (S) Diluted (S) Poly[oxy(methyl-
Company. corrosion inhibitor/ 1,2-
organic scale ethanediyl)],alpha-
inhibitor (2-
intermediate. aminomethylethyl)-
omega-(2-
aminomethylethoxy)-
,
phosphonomethylated
, sodium salts.
P-14-0827........ 9/3/2014 12/2/2014 Baze Chemical (S) Organic scale (S) Poly[oxy(methyl-
Company. inhibitor 1,2-
intermediate for ethanediyl)],alpha-
oil field scale (2-
inhibition. aminomethylethyl)-
omega-(2-
aminomethylethoxy)-
,
phosphonomethylated
, sodium salts.
P-14-0826........ 9/3/2014 12/2/2014 Rhineland (S) Binder in paints (G) Fatty acids,
Specialties, Inc. used for marine unsatd., polymers
applications. with hydroxy-
terminated PH PR
organosilica,
alkylpolyhydroxide,
aryl anhydride, and
fatty acid.
P-14-0828........ 9/3/2014 12/2/2014 CBI.............. (S) Polymer (G) Formamide, N-
intermediate. ethenyl-, polymer.
P-14-0829........ 9/4/2014 12/3/2014 CBI.............. (S) Surfactant for (S) Pending Letter
use in paints, of Support.
coatings, inks,
waxes, detergents,
polishes,
adhesives, and
lubricants.

[[Page 60156]]

P-14-0830........ 9/8/2014 12/7/2014 CBI.............. (G) Additve for (S) 1-propanaminium,
household cleaners N,N,N-trimethyl-3-
and products. [(2-methyl-1-oxo-2-
propenyl)amino]-,
chloride (1:1),
polymer with 2-
propenamide and 2-
propenoic acid,
sodium salt.
P-14-0831........ 9/8/2014 12/7/2014 CBI.............. (S) A binder for (G) Fatty acids,
metal coating. polymers with
acrylic monomers,
bisphenol A, 2-
ethoxyethanol,
epichlorohydrin and
styrene, alkyl
peroxide-initiated,
compounds (cmpds)
with triethylamine.
P-14-0832........ 9/8/2014 12/7/2014 CBI.............. (S) A binder resin (G) Fatty acids,
for metal coating. polymers with
acrylic monomers,
bisphenol A,
modified oil,
epichlorohydrin and
styrene, alkyl
peroxide-initiated,
cmpds. with
triethylamine.
P-14-0833........ 9/8/2014 12/7/2014 CBI.............. (G) Open, non- (G) Epoxy-amine
dispersive. adduct,
neutralized.
P-14-0834........ 9/9/2014 12/8/2014 CBI.............. (G) Component for (G) Polyfunctional
plastic parts carbodiimide.
coating.
P-14-0835........ 9/11/2014 12/10/2014 CBI.............. (G) PMN substance is (G) Alkyl carboxylic
a component OF acid lithium salt.
inkjet ink.
P-14-0837........ 9/12/2014 12/11/2014 Henkel (S) Hot melt (S) Fatty acids, C18-
Corporation. adhesive and unsaturated
industrial bonding (unsat'd.), dimers,
applications. polymers with
azelaic acid,
ethylenediamine,
hexamethylenediamin
e, piperazine,
polyoxypropylene
diamine and tall-
oil fatty acids.
P-14-0836........ 9/12/2014 12/11/2014 Henkel (S) Hot melt (S) Fatty acids, C18-
Corporation. adhesive and unsat'd., dimers,
industrial bonding polymers with
applications. azelaic acid,
ethylenediamine,
piperazine,
polypropylene
glycol diamine and
tall oil fatty
acids*.
P-14-0838........ 9/12/2014 12/11/2014 CBI.............. (G) Component for (G) Modified
tire. copolymer of buta-
1,3-diene and
styrene.
P-14-0840........ 9/12/2014 12/11/2014 CBI.............. (G) Reactive hot (G) Silane cure
melt adhesive for reactive hot melt
roll coating or adhesive.
spraying
application to make
panels for
construction.
P-14-0841........ 9/12/2014 12/11/2014 CBI.............. (S) Fluorescent (G)
brightener for use Triazinylaminostilb
in paper ene.
applications.
P-14-0842........ 9/12/2014 12/11/2014 CBI.............. (G) Polymerization (G) Polycyclic
monomer. hydrocarbon.
P-14-0843........ 9/15/2014 12/14/2014 CBI.............. (G) Laundry additive (G) Alkoxylated
glycerol ester.
P-14-0844........ 9/15/2014 12/14/2014 CBI.............. (G) Heat dissipation (G) Organosilane
treated boron
nitride.
P-14-0845........ 9/15/2014 12/14/2014 CBI.............. (G) Heat dissipation (G) Organosilane
treated oxide
ceramic.
----------------------------------------------------------------------------------------------------------------

In Table II. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
received by EPA during this period: The EPA case number assigned to the
NOC, the date the NOC was received by EPA, the projected end date for
EPA's review of the NOC, and chemical identity.

Table II--29 NOCs Received From 8/25/14 to 9/15/14
------------------------------------------------------------------------
Commencement
Case no. Received date notice end Chemical
date
------------------------------------------------------------------------
P-01-0357........ 8/22/2014 8/5/2014 (G) N,N' substituted
aniline sulfonic
acid, compound with
2,2',2``-nitrilotris
[ethanol].
P-14-0539........ 8/22/2014 8/6/2014 (G) Siloxanes and
silicones, di-me, 3-
(2-
hydroxyethoxy)alkyl
group-terminated,
polymers with 1,4-
alkanediol, di-et
carbonate, alkene
glycol, 1,6-
alkanediol and 1,1-
alkylenebis[4-
isocyanatocycloalkan
e].
P-14-0540........ 8/22/2014 8/6/2014 (G) Siloxanes and
silicones, di-me, 3-
(2-
hydroxyethoxy)alkyl
group-terminated,
polymers with 1,4-
alkanediol, di-et
carbonate, alkene
glycol, 1,6-
alkanediol and 1,1-
alkylenebis[4-
isocyanatocycloalkan
e].
P-14-0052........ 8/25/2014 8/3/2014 (G) Polymer modified
multifunctional
silane.
P-14-0500........ 8/25/2014 8/21/2014 (G) Butanedioic acid,
compd. with
polyalkylpolyaminoam
idine.
P-12-0573........ 8/26/2014 8/8/2014 (G) Amine substitued
quinoacridine
product.
P-14-0270........ 8/26/2014 8/18/2014 (G) Multifunctional
novolac type epoxy
resin.
P-14-0289........ 8/26/2014 8/18/2014 (G) Multifunctional
novolac type epoxy
resin.

[[Page 60157]]

J-14-0017........ 8/26/2014 8/19/2014 (G) Modified
microalgae.
P-12-0115........ 8/27/2014 8/20/2014 (G) Alkylbenzene
sulfonic acid.
P-14-0143........ 8/28/2014 8/20/2014 (G) Alkanaminium,
substituted
carbomonocycle
alkylamino)carbomono
cycle]alkylene]-
substituted
carbomonocycle,
carboxylate salt.
P-13-0907........ 8/28/2014 8/25/2014 (G) Epoxy resin,
reaction products
with alkanolamines.
P-12-0116........ 8/28/2014 8/28/2014 (G) Alkylbenzene
sulfonate sodium
salt.
P-14-0487........ 8/29/2014 8/5/2014 (G)
Polyalkylaminoalkary
loxy, carboxylic
acid, metal salt.
P-14-0336........ 8/29/2014 8/20/2014 (S) Dodecanedioic
acid, polymer with
2,2-dimethyl-1,3-
propanediol.
P-14-0417........ 9/2/2014 8/26/2014 (G) Aliphatic ether
ethyl alcohol.
P-14-0418........ 9/2/2014 8/26/2014 (G) Styrene-
methacrylate
copolymer.
P-13-0919........ 9/2/2014 8/30/2014 (G) Glycerides, C14-
C18, C16-C18
unsaturated, from
algal fermentation.
P-14-0308........ 9/2/2014 8/30/2014 (G) Algal biomass
from fermentation.
P-14-0447........ 9/4/2014 8/9/2014 (S) Alcohols, C18 22,
distillation
residues.
P-14-0448........ 9/4/2014 8/9/2014 (S) Alcohols, C12 22,
distillation
residues.
P-14-0556........ 9/5/2014 8/21/2014 (S) Oils, peach pulp.
P-13-0650........ 9/8/2014 9/3/2014 (G) Epoxy-amine
adduct, neutralized.
P-14-0547........ 9/9/2014 9/5/2014 (G) Organometallic,
reaction product
with zirconium
metallocene, silica,
and aluminum alkyl.
P-14-0337........ 9/10/2014 8/20/2014 (S) Poly(oxy(methyl-
1,2-ethanediyl)], -
hydro--hydroxy-,
polymer with 1,6-
diisocyanatohexane
and 1,1'-
methylenebis[4-
isocyanatocyclohexan
e], caprolactam- and
polyethylene glycol
mono-me ether-
blocked.
P-14-0450........ 9/10/2014 9/2/2014 (G) Siliconate
potassium.
P-14-0504........ 9/11/2014 9/3/2014 (G) Alkylated
urethane copolymer.
P-08-0271........ 9/12/2014 9/4/2014 (S) Molybdenum,
borate neodecanoate
oxo complexes.
P-14-0566........ 9/15/2014 9/6/2014 (G) Disubstituted
alkenal.
------------------------------------------------------------------------

If you are interested in information that is not included in these
tables, you may contact EPA as described in Unit III. to access
additional non-CBI information that may be available.

Authority: 15 U.S.C. 2601 et. seq.

Dated: September 23, 2014.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2014-23772 Filed 10-3-14; 8:45 am]
BILLING CODE 6560-50-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.