Accreditation and Approval of AmSpec Services, LLC, as a Commercial Gauger and Laboratory, 53205-53206 [2014-21289]
Download as PDF
53205
Federal Register / Vol. 79, No. 173 / Monday, September 8, 2014 / Notices
care management, chronic disease
prevention, and best practices to inform
the Committee’s effort to formulate
appropriate recommendations for the
Secretary and the Congress.
Public Comment: Requests to make
oral comments or provide written
comments to the ACICBL should be sent
to Dr. Joan Weiss, Designated Federal
Official, using the address and phone
number below. Individuals who plan to
participate on the conference call or
webinar should notify Dr. Weiss at least
3 days prior to the meeting. Members of
the public will have the opportunity to
provide comments. Interested parties
should refer to the meeting subject as
the HRSA Advisory Committee on
Interdisciplinary, Community-Based
Linkages.
SUPPLEMENTARY INFORMATION: As this
meeting will be a combined format of
both in-person, webinar and conference
call, members of the public and
interested parties who wish to
participate ‘‘in-person’’ should make an
immediate request by emailing their
first name, last name, and contact email
to the Designated Federal Official for the
committee, Dr. Joan Weiss, using the
address and phone number below.
Space is limited. Due to the fact that this
meeting will be held within a federal
government building and public
entrance to such facilities require prior
planning, access will be granted upon
request only and will be on a first come,
first served basis. The conference call-in
number is 1–877–918–1352 and the
passcode is 4961069. The webinar link
is https://hrsa.connectsolutions.com/
advcmte/.
The logistical challenges of
scheduling this meeting hindered an
earlier publication of this meeting
notice.
FOR FURTHER INFORMATION CONTACT:
Anyone requesting information
regarding the ACICBL should contact
Dr. Joan Weiss, Designated Federal
Official within the Bureau of Health
Workforce, Health Resources and
Services Administration, in one of three
ways: (1) Send a request to the following
address: Dr. Joan Weiss, Designated
Federal Official, Bureau of Health
Workforce, Health Resources and
Services Administration, Parklawn
Building, Room 12C–05, 5600 Fishers
Lane, Rockville, Maryland 20857; (2)
call (301) 443–0430; or (3) send an email
to jweiss@hrsa.gov.
Dated: August 29, 2014.
Jackie Painter,
Acting Director, Division of Policy and
Information Coordination.
[FR Doc. 2014–21279 Filed 9–5–14; 8:45 am]
BILLING CODE 4165–15–P
DEPARTMENT OF HOMELAND
SECURITY
Customs and Border Protection
Accreditation and Approval of AmSpec
Services, LLC, as a Commercial
Gauger and Laboratory
U.S. Customs and Border
Protection, Department of Homeland
Security.
AGENCY:
Effective Date: The accreditation
and approval of AmSpec Services, LLC,
as commercial gauger and laboratory
became effective on June 11, 2014. The
next triennial inspection date will be
scheduled for June 2017.
DATES:
FOR FURTHER INFORMATION CONTACT:
Approved Gauger and Accredited
Laboratories Manager, Laboratories and
Scientific Services Directorate, U.S.
Customs and Border Protection, 1300
Pennsylvania Avenue NW., Suite
1500N, Washington, DC 20229, tel. 202–
344–1060.
Notice is
hereby given pursuant to 19 CFR 151.12
and 19 CFR 151.13, that AmSpec
Services, LLC, 12154–B River Rd., St.
Rose, LA 70087, has been approved to
gauge petroleum and certain petroleum
products and accredited to test
petroleum and certain petroleum
products for customs purposes, in
accordance with the provisions of 19
CFR 151.12 and 19 CFR 151.13. AmSpec
Services, LLC is approved for the
following gauging procedures for
petroleum and certain petroleum
products from the American Petroleum
Institute (API):
SUPPLEMENTARY INFORMATION:
API chapters
Title
Notice of accreditation and
approval of AmSpec Services, LLC, as a
commercial gauger and laboratory.
3 .......................
7 .......................
8 .......................
12 .....................
17 .....................
Tank gauging.
Temperature determination.
Sampling.
Calculations.
Maritime measurement.
Notice is hereby given,
pursuant to CBP regulations, that
AmSpec Services, LLC, has been
approved to gauge petroleum and
certain petroleum products and
accredited to test petroleum and certain
petroleum products for customs
purposes for the next three years as of
June 11, 2014.
AmSpec Services, LLC is accredited
for the following laboratory analysis
procedures and methods for petroleum
and certain petroleum products set forth
by the U.S. Customs and Border
Protection Laboratory Methods (CBPL)
and American Society for Testing and
Materials (ASTM):
ACTION:
SUMMARY:
ASTM
Title
27–03 ...............................................
27–48 ...............................................
ASTM D–4006 ...............................
ASTM D–4052 ...............................
27–13 ...............................................
ASTM D–4294 ...............................
27–04 ...............................................
rmajette on DSK2TPTVN1PROD with NOTICES
CBPL No.
ASTM D–95 ...................................
27–46 ...............................................
27–08 ...............................................
ASTM D–5002 ...............................
ASTM D–86 ...................................
27–11 ...............................................
ASTM D–445 .................................
27–54 ...............................................
ASTM D–1796 ...............................
27–53 ...............................................
ASTM D–2709 ...............................
Standard test method for water in crude oil by distillation.
Standard test method for density and relative density of liquids by
digital density meter.
Standard test method for sulfur in petroleum and petroleum products
by energy-dispersive x-ray fluorescence spectrometry.
Standard test method for water in petroleum products and bituminous
materials by distillation.
Standard test method for density and relative density.
Standard test method for distillation of petroleum products at atmospheric pressure.
Standard test method for kinematic viscosity of transparent and
opaque liquids (and calculations of dynamic viscosity).
Standard test method for water and sediment in fuel oils by the centrifuge method (Laboratory procedure).
Standard test method for water and sediment in middle distillate fuels
by centrifuge.
VerDate Mar<15>2010
15:14 Sep 05, 2014
Jkt 232001
PO 00000
Frm 00044
Fmt 4703
Sfmt 4703
E:\FR\FM\08SEN1.SGM
08SEN1
53206
Federal Register / Vol. 79, No. 173 / Monday, September 8, 2014 / Notices
CBPL No.
ASTM
Title
27–06 ...............................................
ASTM D–473 .................................
27–50 ...............................................
ASTM D–93 ...................................
27–14 ...............................................
ASTM D–2622 ...............................
27–57 ...............................................
ASTM D–7039 ...............................
Standard test method for sediment in crude oils and fuel oils by the
extraction method.
Standard test methods for flash point by Penske-Martens Closed
Cup Tester.
Standard test method for Sulfur in Petroleum Products by Wavelength Dispersive X-Ray Fluorescence Spectrometry.
Standard test method for Sulfur in Gasoline and diesel fuel by
Monochromatic wavelength dispersive X-ray fluorescence spectrometry.
Anyone wishing to employ this entity
to conduct laboratory analyses and
gauger services should request and
receive written assurances from the
entity that it is accredited or approved
by the U.S. Customs and Border
Protection to conduct the specific test or
gauger service requested. Alternatively,
inquiries regarding the specific test or
gauger service this entity is accredited
or approved to perform may be directed
to the U.S. Customs and Border
Protection by calling (202) 344–1060.
The inquiry may also be sent to
CBPGaugersLabs@cbp.dhs.gov. Please
reference the Web site listed below for
a complete listing of CBP approved
gaugers and accredited laboratories.
https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories
DEPARTMENT OF HOMELAND
SECURITY
Dated: September 2, 2014.
Ira S. Reese,
Executive Director, Laboratories and
Scientific Services Directorate.
DATES:
U.S. Customs and Border Protection
Accreditation of Intertek USA, Inc., as
a Commercial Laboratory
U.S. Customs and Border
Protection, Department of Homeland
Security.
AGENCY:
Notice of accreditation of
Intertek USA, Inc., as a commercial
laboratory.
ACTION:
Notice is hereby given,
pursuant to CBP regulations, that
Intertek USA, Inc., has been accredited
to test petroleum and certain petroleum
products for customs purposes for the
next three years as of April 29, 2014.
SUMMARY:
Effective Dates: The
accreditation of Intertek USA, Inc., as
commercial laboratory became effective
on April 29, 2014. The next triennial
inspection date will be scheduled for
April 2017.
[FR Doc. 2014–21289 Filed 9–5–14; 8:45 am]
BILLING CODE 9111–14–P
FOR FURTHER INFORMATION CONTACT:
Approved Gauger and Accredited
Laboratories Manager, Laboratories and
Scientific Services Directorate, U.S.
Customs and Border Protection, 1300
Pennsylvania Avenue NW., Suite
1500N, Washington, DC 20229, tel. 202–
344–1060.
Notice is
hereby given pursuant to 19 CFR 151.12,
that Intertek USA, Inc., 15602
Jacintoport Blvd., Houston, TX 77015,
has been accredited to test petroleum
and certain petroleum products for
customs purposes, in accordance with
the provisions of 19 CFR 151.12.
Intertek USA, Inc. is accredited for the
following laboratory analysis
procedures and methods for petroleum
and certain petroleum products set forth
by the U.S. Customs and Border
Protection Laboratory Methods (CBPL)
and American Society for Testing and
Materials (ASTM):
SUPPLEMENTARY INFORMATION:
ASTM
Title
27–11 ..................................
27–48 ..................................
rmajette on DSK2TPTVN1PROD with NOTICES
CBPL No.
D 445 ...............................
D 4052 .............................
Standard test method of kinematic viscosity of transparent and opaque liquids.
Standard test method for density and relative density of liquids by digital density
meter.
Anyone wishing to employ this entity
to conduct laboratory analyses should
request and receive written assurances
from the entity that it is accredited or
approved by the U.S. Customs and
Border Protection to conduct the
specific test requested. Alternatively,
inquiries regarding the specific test that
this entity is accredited to perform may
be directed to the U.S. Customs and
Border Protection by calling (202) 344–
1060. The inquiry may also be sent to
CBPGaugersLabs@cbp.dhs.gov. Please
reference the Web site listed below for
a complete listing of CBP approved
gaugers and accredited laboratories.
https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories.
VerDate Mar<15>2010
15:14 Sep 05, 2014
Jkt 232001
Dated: September 2, 2014.
Ira S. Reese,
Executive Director, Laboratories and
Scientific Services Directorate.
[FR Doc. 2014–21287 Filed 9–5–14; 8:45 am]
DEPARTMENT OF THE INTERIOR
Bureau of Indian Affairs
[145A2100DD/AAK3000000/A0H501010/
241A00]
BILLING CODE 9111–14–P
PO 00000
Revision of Agency Information
Collection for Indian Child Welfare
Quarterly and Annual Report
Bureau of Indian Affairs,
Interior.
ACTION: Notice of request for comments.
AGENCY:
In compliance with the
Paperwork Reduction Act of 1995, the
Bureau of Indian Affairs (BIA) is seeking
comments on the renewal of Office of
Management and Budget (OMB)
SUMMARY:
Frm 00045
Fmt 4703
Sfmt 4703
E:\FR\FM\08SEN1.SGM
08SEN1
Agencies
[Federal Register Volume 79, Number 173 (Monday, September 8, 2014)]
[Notices]
[Pages 53205-53206]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-21289]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF HOMELAND SECURITY
Customs and Border Protection
Accreditation and Approval of AmSpec Services, LLC, as a
Commercial Gauger and Laboratory
AGENCY: U.S. Customs and Border Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and approval of AmSpec Services, LLC,
as a commercial gauger and laboratory.
-----------------------------------------------------------------------
SUMMARY: Notice is hereby given, pursuant to CBP regulations, that
AmSpec Services, LLC, has been approved to gauge petroleum and certain
petroleum products and accredited to test petroleum and certain
petroleum products for customs purposes for the next three years as of
June 11, 2014.
DATES: Effective Date: The accreditation and approval of AmSpec
Services, LLC, as commercial gauger and laboratory became effective on
June 11, 2014. The next triennial inspection date will be scheduled for
June 2017.
FOR FURTHER INFORMATION CONTACT: Approved Gauger and Accredited
Laboratories Manager, Laboratories and Scientific Services Directorate,
U.S. Customs and Border Protection, 1300 Pennsylvania Avenue NW., Suite
1500N, Washington, DC 20229, tel. 202-344-1060.
SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR
151.12 and 19 CFR 151.13, that AmSpec Services, LLC, 12154-B River Rd.,
St. Rose, LA 70087, has been approved to gauge petroleum and certain
petroleum products and accredited to test petroleum and certain
petroleum products for customs purposes, in accordance with the
provisions of 19 CFR 151.12 and 19 CFR 151.13. AmSpec Services, LLC is
approved for the following gauging procedures for petroleum and certain
petroleum products from the American Petroleum Institute (API):
------------------------------------------------------------------------
API chapters Title
------------------------------------------------------------------------
3................................ Tank gauging.
7................................ Temperature determination.
8................................ Sampling.
12............................... Calculations.
17............................... Maritime measurement.
------------------------------------------------------------------------
AmSpec Services, LLC is accredited for the following laboratory
analysis procedures and methods for petroleum and certain petroleum
products set forth by the U.S. Customs and Border Protection Laboratory
Methods (CBPL) and American Society for Testing and Materials (ASTM):
----------------------------------------------------------------------------------------------------------------
CBPL No. ASTM Title
----------------------------------------------------------------------------------------------------------------
27-03................................... ASTM D-4006................ Standard test method for water in crude
oil by distillation.
27-48................................... ASTM D-4052................ Standard test method for density and
relative density of liquids by digital
density meter.
27-13................................... ASTM D-4294................ Standard test method for sulfur in
petroleum and petroleum products by
energy-dispersive x-ray fluorescence
spectrometry.
27-04................................... ASTM D-95.................. Standard test method for water in
petroleum products and bituminous
materials by distillation.
27-46................................... ASTM D-5002................ Standard test method for density and
relative density.
27-08................................... ASTM D-86.................. Standard test method for distillation of
petroleum products at atmospheric
pressure.
27-11................................... ASTM D-445................. Standard test method for kinematic
viscosity of transparent and opaque
liquids (and calculations of dynamic
viscosity).
27-54................................... ASTM D-1796................ Standard test method for water and
sediment in fuel oils by the centrifuge
method (Laboratory procedure).
27-53................................... ASTM D-2709................ Standard test method for water and
sediment in middle distillate fuels by
centrifuge.
[[Page 53206]]
27-06................................... ASTM D-473................. Standard test method for sediment in
crude oils and fuel oils by the
extraction method.
27-50................................... ASTM D-93.................. Standard test methods for flash point by
Penske-Martens Closed Cup Tester.
27-14................................... ASTM D-2622................ Standard test method for Sulfur in
Petroleum Products by Wavelength
Dispersive X-Ray Fluorescence
Spectrometry.
27-57................................... ASTM D-7039................ Standard test method for Sulfur in
Gasoline and diesel fuel by
Monochromatic wavelength dispersive X-
ray fluorescence spectrometry.
----------------------------------------------------------------------------------------------------------------
Anyone wishing to employ this entity to conduct laboratory analyses
and gauger services should request and receive written assurances from
the entity that it is accredited or approved by the U.S. Customs and
Border Protection to conduct the specific test or gauger service
requested. Alternatively, inquiries regarding the specific test or
gauger service this entity is accredited or approved to perform may be
directed to the U.S. Customs and Border Protection by calling (202)
344-1060. The inquiry may also be sent to CBPGaugersLabs@cbp.dhs.gov.
Please reference the Web site listed below for a complete listing of
CBP approved gaugers and accredited laboratories. https://www.cbp.gov/about/labs-scientific/commercial-gaugers-and-laboratories
Dated: September 2, 2014.
Ira S. Reese,
Executive Director, Laboratories and Scientific Services Directorate.
[FR Doc. 2014-21289 Filed 9-5-14; 8:45 am]
BILLING CODE 9111-14-P