Offender Tracking System Test Method Validation, 51194 [2014-20390]
Download as PDF
51194
Federal Register / Vol. 79, No. 166 / Wednesday, August 27, 2014 / Notices
This meeting will be held at
the Office of Justice Programs, and will
also support participation of Members
via conference call-in.
ADDRESSES:
FOR FURTHER INFORMATION CONTACT:
Gregory Joy, Policy Advisor, Bureau of
Justice Assistance, Office of Justice
Programs, 810 7th Street NW.,
Washington, DC 20531, by telephone at
(202) 514–1369, toll free (866) 859–
2687, or by email at Gregory.Joy@
usdoj.gov.
The
Public Safety Officer Medal of Valor
Review Board carries out those advisory
functions specified in 42 U.S.C. 15202.
Pursuant to 42 U.S.C. 15201, the
President of the United States is
authorized to award the Public Safety
Officer Medal of Valor, the highest
national award for valor by a public
safety officer.
The purpose of this meeting/
conference call is primarily to consider
nominations for the 2013–2014 Medal of
Valor, and make a limited number of
recommendations for submission to the
U.S. Attorney General. Additional
issues of importance to the Board will
also be covered, to include but not
limited to a discussion about a joint
presentation ceremony to recognize and
award the 2011–2012, and 2012–2013,
Medal of Valor to the recipients from
those award years.
This meeting is open to the public at
the Office of Justice Programs. For
security purposes, members of the
public who wish to participate must
register at least seven (7) days in
advance of the meeting/conference call
by contacting Mr. Joy. All interested
participants will be required to meet at
the Bureau of Justice Assistance, Office
of Justice Programs; 810 7th Street NW.,
Washington, DC and will be required to
sign in at the front desk. Note: Photo
identification will be required for
admission. Additional identification
documents may be required.
Access to the meeting will not be
allowed without prior registration.
Anyone requiring special
accommodations should contact Mr. Joy
at least seven (7) days in advance of the
meeting. Please submit any comments
or written statements for consideration
by the Review Board in writing at least
seven (7) days in advance of the meeting
date.
mstockstill on DSK4VPTVN1PROD with NOTICES
SUPPLEMENTARY INFORMATION:
Gregory Joy,
Policy Advisor/Designated Federal Officer,
Bureau of Justice Assistance.
[FR Doc. 2014–20435 Filed 8–26–14; 8:45 am]
BILLING CODE 4410–18–P
VerDate Mar<15>2010
17:44 Aug 26, 2014
Jkt 232001
DEPARTMENT OF JUSTICE
Office of Justice Programs
[OJP (NIJ) Docket No. 1670]
Offender Tracking System Test Method
Validation
AGENCY:
National Institute of Justice,
DOJ.
ACTION:
Notice.
National Institute of Justice
has recently developed draft minimum
performance standards for offender
tracking systems. In order to ensure that
the test methods in the standards are
adequate and properly documented, NIJ
is requesting proposals (including price
quotes) for test method validation efforts
from testing laboratories. Additional
information for these efforts may be
found through the National Law
Enforcement and Corrections
Technology Center’s Web site by
following the link below: https://
www.justnet.org/standards/Offender_
Tracking_Standards.html.
DATES: Please submit proposals no later
than October 14, 2014.
FOR FURTHER INFORMATION CONTACT: Joe
Russo by telephone at (303) 588–6015 or
by email at jrusso@du.edu.
SUMMARY:
William Sabol,
Acting Director, National Institute of Justice.
[FR Doc. 2014–20390 Filed 8–26–14; 8:45 am]
BILLING CODE 4410–18–P
Authority: 44 U.S.C. 3507(a)(1)(D).
DEPARTMENT OF LABOR
Agency Information Collection
Activities; Submission for OMB
Review; Comment Request; Grain
Handling Facilities Standard
Notice.
The Department of Labor
(DOL) is submitting the Occupational
Safety and Health Administration
(OSHA) sponsored information
collection request (ICR) titled, ‘‘Grain
Handling Facilities Standard,’’ to the
Office of Management and Budget
(OMB) for review and approval for
continued use, without change, in
accordance with the Paperwork
Reduction Act of 1995 (PRA), 44 U.S.C.
3501 et seq. Public comments on the
ICR are invited.
DATES: The OMB will consider all
written comments that agency receives
on or before September 26, 2014.
ADDRESSES: A copy of this ICR with
applicable supporting documentation;
SUMMARY:
PO 00000
Frm 00057
Fmt 4703
Sfmt 4703
This ICR
seeks to extend PRA authority for the
Grain Handling Facilities Standard
information collection requirements
codified in regulations 29 CFR
1910.272, which requires an
Occupational Safety and Health Act
(OSH Act) covered employer engaged in
the operation of a grain handling facility
to develop a housekeeping plan, an
emergency action plan, and procedures
for the use of tags and locks. The
Standard also addresses the
circumstances under which an
employer must issue a hot work permit
or a permit authorizing entry into a
grain storage structure. Certification
records are also required after
inspections of the mechanical and safety
control equipment associated with
dryers, grain stream processing
equipment, etc. OSH Act sections
2(b)(9), 6(b)(7), and 8(c) authorize this
information collection. See 29 U.S.C.
651(b)(9), 655(b)(7), 657(c).
This information collection is subject
to the PRA. A Federal agency generally
cannot conduct or sponsor a collection
SUPPLEMENTARY INFORMATION:
Office of the Secretary
ACTION:
including a description of the likely
respondents, proposed frequency of
response, and estimated total burden
may be obtained free of charge from the
RegInfo.gov Web site at https://
www.reginfo.gov/public/do/
PRAViewICR?ref_nbr=201403-1218-003
(this link will only become active on the
day following publication of this notice)
or by contacting Michel Smyth by
telephone at 202–693–4129, TTY 202–
693–8064, (these are not toll-free
numbers) or by email at DOL_PRA_
PUBLIC@dol.gov.
Submit comments about this request
by mail or courier to the Office of
Information and Regulatory Affairs,
Attn: OMB Desk Officer for DOL–OSHA,
Office of Management and Budget,
Room 10235, 725 17th Street NW.,
Washington, DC 20503; by Fax: 202–
395–6881 (this is not a toll-free
number); or by email: OIRA_
submission@omb.eop.gov. Commenters
are encouraged, but not required, to
send a courtesy copy of any comments
by mail or courier to the U.S.
Department of Labor-OASAM, Office of
the Chief Information Officer, Attn:
Departmental Information Compliance
Management Program, Room N1301,
200 Constitution Avenue NW.,
Washington, DC 20210; or by email:
DOL_PRA_PUBLIC@dol.gov.
FOR FURTHER INFORMATION CONTACT:
Contact Michel Smyth by telephone at
202–693–4129, TTY 202–693–8064,
(these are not toll-free numbers) or by
email at DOL_PRA_PUBLIC@dol.gov.
E:\FR\FM\27AUN1.SGM
27AUN1
Agencies
[Federal Register Volume 79, Number 166 (Wednesday, August 27, 2014)]
[Notices]
[Page 51194]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-20390]
-----------------------------------------------------------------------
DEPARTMENT OF JUSTICE
Office of Justice Programs
[OJP (NIJ) Docket No. 1670]
Offender Tracking System Test Method Validation
AGENCY: National Institute of Justice, DOJ.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: National Institute of Justice has recently developed draft
minimum performance standards for offender tracking systems. In order
to ensure that the test methods in the standards are adequate and
properly documented, NIJ is requesting proposals (including price
quotes) for test method validation efforts from testing laboratories.
Additional information for these efforts may be found through the
National Law Enforcement and Corrections Technology Center's Web site
by following the link below: https://www.justnet.org/standards/
OffenderTrackingStandards.html.
DATES: Please submit proposals no later than October 14, 2014.
FOR FURTHER INFORMATION CONTACT: Joe Russo by telephone at (303) 588-
6015 or by email at jrusso@du.edu.
William Sabol,
Acting Director, National Institute of Justice.
[FR Doc. 2014-20390 Filed 8-26-14; 8:45 am]
BILLING CODE 4410-18-P