Approval and Promulgation of Implementation Plans; State of Missouri, Auto Exhaust Emission Controls, 41948 [2014-16701]

Download as PDF 41948 Federal Register / Vol. 79, No. 138 / Friday, July 18, 2014 / Proposed Rules with the Accomplishment Instructions of Boeing Alert Service Bulletin MD80–55A070, Revision 1, dated December 17, 2013. Thereafter, repeat the ETHF inspection at the applicable time specified in paragraph 1.E., ‘‘Compliance,’’ of Boeing Alert Service Bulletin MD80–55A070, Revision 1, dated December 17, 2013. If any cracking is found during any inspection, before further flight, do all applicable corrective actions, in accordance with the Accomplishment Instructions of Boeing Alert Service Bulletin MD80–55A070, Revision 1, dated December 17, 2013. telephone 206–544–5000, extension 2; fax 206–766–5683; Internet https:// www.myboeingfleet.com.You may review copies of the referenced service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425–227–1221. (i) Exception to the Service Information Specifications Where Boeing Alert Service Bulletin MD80–55A070, Revision 1, dated December 17, 2013, specifies a compliance time ‘‘after the original issue date of this service bulletin,’’ this AD requires compliance within the specified compliance time after the effective date of this AD. [FR Doc. 2014–16940 Filed 7–17–14; 8:45 am] (j) Credit for Previous Actions This paragraph provides credit for the actions specified in paragraph (g) of this AD, if those actions were performed before the effective date of this AD using Boeing Alert Service Bulletin MD80–55A070, dated May 22, 2013, which is not incorporated by reference in this AD. mstockstill on DSK4VPTVN1PROD with PROPOSALS (k) Alternative Methods of Compliance (AMOCs) (1) The Manager, Los Angeles Aircraft Certification Office (ACO), FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the ACO, send it to the attention of the person identified in paragraph (l)(1) of this AD. (2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/ certificate holding district office. (3) An AMOC that provides an acceptable level of safety may be used for any repair required by this AD if it is approved by the Boeing Commercial Airplanes Organization Designation Authorization (ODA) that has been authorized by the Manager, Los Angeles ACO to make those findings. For a repair method to be approved, the repair must meet the certification basis of the airplane, and 14 CFR 25.571, Amendment 45, and the approval must specifically refer to this AD. (l) Related Information (1) For more information about this AD, contact George Garrido, Aerospace Engineer, Airframe Branch, ANM–120L, FAA, Los Angeles Aircraft Certification Office, 3960 Paramount Boulevard, Lakewood, CA 90712– 4137; phone: 562–627–5357; fax: 562–627– 5210; email: george.garrido@faa.gov. (2) For service information identified in this AD, contact Boeing Commercial Airplanes, Attention: Data & Services Management, 3855 Lakewood Boulevard, MC D800–0019, Long Beach, CA 90846–0001; VerDate Mar<15>2010 17:04 Jul 17, 2014 Jkt 232001 Issued in Renton, Washington, on July 11, 2014. Michael Kaszycki, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service. BILLING CODE 4910–13–P ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 52 [EPA–R07–OAR–2014–0400; FRL–9913–80– Region–7] Approval and Promulgation of Implementation Plans; State of Missouri, Auto Exhaust Emission Controls Environmental Protection Agency (EPA). ACTION: Proposed rule. AGENCY: The Environmental Protection Agency (EPA) is proposing to take direct final action to approve the State Implementation Plan (SIP) revision submitted by the state of Missouri on January 14, 2014, for the purpose of removing an outdated rule. This action amends the SIP to remove a rule that was originally approved in 1972 but has now been rescinded. This rule refers to exhaust emission control components that are no longer manufactured. Vehicle manufacturers now produce newer technology in exhaust emissions equipment in order to meet more stringent Federal motor vehicle standards. SUMMARY: Comments on this proposed action must be received in writing by August 18, 2014. ADDRESSES: Submit your comments, identified by Docket ID No. EPA–R07– OAR–2014–0400, by mail to Paula Higbee, Environmental Protection Agency, Air Planning and Development Branch, 11201 Renner Boulevard, Lenexa, Kansas 66219. Comments may also be submitted electronically or through hand delivery/courier by following the detailed instructions in the ADDRESSES section of the direct final rule located in the rules section of this Federal Register. FOR FURTHER INFORMATION CONTACT: Paula Higbee, Environmental Protection Agency, Air Planning and Development Branch, 11201 Renner Boulevard, Lenexa, Kansas 66219 at 913–551–7028, or by email at higbee.paula@epa.gov. SUPPLEMENTARY INFORMATION: In the final rules section of the Federal Register, EPA is approving the state’s SIP revision as a direct final rule without prior proposal because the Agency views this as a noncontroversial revision amendment and anticipates no relevant adverse comments to this action. A detailed rationale for the approval is set forth in the direct final rule. If no relevant adverse comments are received in response to this action, no further activity is contemplated in relation to this action. If EPA receives relevant adverse comments, the direct final rule will be withdrawn and all public comments received will be addressed in a subsequent final rule based on this proposed action. EPA will not institute a second comment period on this action. Any parties interested in commenting on this action should do so at this time. Please note that if EPA receives adverse comment on part of this rule and if that part can be severed from the remainder of the rule, EPA may adopt as final those parts of the rule that are not the subject of an adverse comment. For additional information, see the direct final rule which is located in the rules section of this Federal Register. Dated: July 1, 2014. Karl Brooks, Regional Administrator, Region 7. [FR Doc. 2014–16701 Filed 7–17–14; 8:45 am] BILLING CODE 6560–50–P ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 52 [EPA–R06–OAR–2013–0764; FRL–9913–93– Region 6] DATES: PO 00000 Frm 00022 Fmt 4702 Sfmt 4702 Approval and Promulgation of Air Quality Implementation Plans; New Mexico; Grant County Sulfur Dioxide Limited Maintenance Plan Environmental Protection Agency (EPA). ACTION: Proposed rule. AGENCY: The Environmental Protection Agency (EPA) is proposing to approve a limited maintenance plan submitted by the State of New Mexico, dated November 1, 2013, for the Grant County maintenance area for the 1971 sulfur dioxide (SO2) National Ambient Air Quality Standard (NAAQS). New Mexico submitted this limited SUMMARY: E:\FR\FM\18JYP1.SGM 18JYP1

Agencies

[Federal Register Volume 79, Number 138 (Friday, July 18, 2014)]
[Proposed Rules]
[Page 41948]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-16701]


=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 52

[EPA-R07-OAR-2014-0400; FRL-9913-80-Region-7]


Approval and Promulgation of Implementation Plans; State of 
Missouri, Auto Exhaust Emission Controls

AGENCY: Environmental Protection Agency (EPA).

ACTION: Proposed rule.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency (EPA) is proposing to take 
direct final action to approve the State Implementation Plan (SIP) 
revision submitted by the state of Missouri on January 14, 2014, for 
the purpose of removing an outdated rule. This action amends the SIP to 
remove a rule that was originally approved in 1972 but has now been 
rescinded. This rule refers to exhaust emission control components that 
are no longer manufactured. Vehicle manufacturers now produce newer 
technology in exhaust emissions equipment in order to meet more 
stringent Federal motor vehicle standards.

DATES: Comments on this proposed action must be received in writing by 
August 18, 2014.

ADDRESSES: Submit your comments, identified by Docket ID No. EPA-R07-
OAR-2014-0400, by mail to Paula Higbee, Environmental Protection 
Agency, Air Planning and Development Branch, 11201 Renner Boulevard, 
Lenexa, Kansas 66219. Comments may also be submitted electronically or 
through hand delivery/courier by following the detailed instructions in 
the ADDRESSES section of the direct final rule located in the rules 
section of this Federal Register.

FOR FURTHER INFORMATION CONTACT: Paula Higbee, Environmental Protection 
Agency, Air Planning and Development Branch, 11201 Renner Boulevard, 
Lenexa, Kansas 66219 at 913-551-7028, or by email at 
higbee.paula@epa.gov.

SUPPLEMENTARY INFORMATION: In the final rules section of the Federal 
Register, EPA is approving the state's SIP revision as a direct final 
rule without prior proposal because the Agency views this as a 
noncontroversial revision amendment and anticipates no relevant adverse 
comments to this action. A detailed rationale for the approval is set 
forth in the direct final rule. If no relevant adverse comments are 
received in response to this action, no further activity is 
contemplated in relation to this action. If EPA receives relevant 
adverse comments, the direct final rule will be withdrawn and all 
public comments received will be addressed in a subsequent final rule 
based on this proposed action. EPA will not institute a second comment 
period on this action. Any parties interested in commenting on this 
action should do so at this time. Please note that if EPA receives 
adverse comment on part of this rule and if that part can be severed 
from the remainder of the rule, EPA may adopt as final those parts of 
the rule that are not the subject of an adverse comment. For additional 
information, see the direct final rule which is located in the rules 
section of this Federal Register.

    Dated: July 1, 2014.
Karl Brooks,
Regional Administrator, Region 7.
[FR Doc. 2014-16701 Filed 7-17-14; 8:45 am]
BILLING CODE 6560-50-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.