Certain New Chemicals; Receipt and Status Information, 38288-38302 [2014-15760]
Download as PDF
38288
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
EA in the Commission’s public record
for this proceeding or the issuance of a
Notice of Schedule for Environmental
Review will serve to notify federal and
state agencies of the timing for the
completion of all necessary reviews, and
the subsequent need to complete all
federal authorizations within 90 days of
the date of issuance of the Commission
staff’s FEIS or EA.
Persons who wish to comment only
on the environmental review of this
project should submit an original and
two copies of their comments to the
Secretary of the Commission.
Environmental commenters will be
placed on the Commission’s
environmental mailing list, will receive
copies of the environmental documents,
and will be notified of meetings
associated with the Commission’s
environmental review process.
Environmental commenters will not be
required to serve copies of filed
documents on all other parties.
However, the non-party commenter will
not receive copies of all documents filed
by other parties or issued by the
Commission (except for the mailing of
environmental documents issued by the
Commission) and will not have the right
to seek court review of the
Commission’s final order.
The Commission strongly encourages
electronic filings of comments, protests
and interventions in lieu of paper using
the ‘‘eFiling’’ link at https://
www.ferc.gov. Persons unable to file
electronically should submit an original
and 5 copies of the protest or
intervention to the Federal Energy
Regulatory Commission, 888 First Street
NE., Washington, DC 20426.
Dated: June 27, 2014.
Kimberly D. Bose,
Secretary.
[FR Doc. 2014–15699 Filed 7–3–14; 8:45 am]
BILLING CODE 6717–01–P
DEPARTMENT OF ENERGY
Federal Energy Regulatory
Commission
[Docket No. CP14–502–000]
mstockstill on DSK4VPTVN1PROD with NOTICES
Columbia Gas Transmission, LLC;
Notice of Request Under Blanket
Authorization
Take notice that on June 17, 2014,
Columbia Gas Transmission, LLC
(Columbia), 5151 San Felipe, Suite
2500, Houston, TX 77056, filed a prior
notice application pursuant to section
7(b) of the Natural Gas Act (NGA) and
sections 157.205 and 157.216 of the
Federal Energy Regulatory
VerDate Mar<15>2010
15:59 Jul 03, 2014
Jkt 232001
Commission’s (Commission) regulations
under the NGA, and Columbia’s blanket
certificate issued in Docket No. CP83–
76–000, for authorization to abandon by
removal four compressor units and
various appurtenant facilities and
structures at Huff Creek Compressor
Station situated in Wyoming County,
West Virginia, all as more fully set forth
in the application, which is open to the
public for inspection. The filing may
also be viewed on the Web at https://
www.ferc.gov using the ‘‘eLibrary’’ link.
Enter the docket number excluding the
last three digits in the docket number
field to access the document. For
assistance, contact FERC at
FERCOnlineSupport@ferc.gov or call
toll-free, (866) 208–3676 or TTY, (202)
502–8659.
Any questions regarding this
application should be directed to
Fredric J. George, Senior Counsel,
Columbia Gas Transmission, LLC, P.O.
Box 1273, Charleston, West Virginia
25325–1273, or phone (304) 357–2359
or fax (304) 357–3206 or by email
fgeorge@nisource.com.
Any person or the Commission’s staff
may, within 60 days after issuance of
the instant notice by the Commission,
file pursuant to Rule 214 of the
Commission’s Procedural Rules (18 CFR
385.214) a motion to intervene or notice
of intervention and pursuant to Section
157.205 of the regulations under the
NGA (18 CFR 157.205), a protest to the
request. If no protest is filed within the
time allowed therefore, the proposed
activity shall be deemed to be
authorized effective the day after the
time allowed for filing a protest. If a
protest is filed and not withdrawn
within 30 days after the allowed time
for filing a protest, the instant request
shall be treated as an application for
authorization pursuant to section 7 of
the NGA.
Pursuant to section 157.9 of the
Commission’s rules, 18 CFR 157.9,
within 90 days of this Notice the
Commission staff will either: Complete
its environmental assessment (EA) and
place it into the Commission’s public
record (eLibrary) for this proceeding, or
issue a Notice of Schedule for
Environmental Review. If a Notice of
Schedule for Environmental Review is
issued, it will indicate, among other
milestones, the anticipated date for the
Commission staff’s issuance of the final
environmental impact statement (FEIS)
or EA for this proposal. The filing of the
EA in the Commission’s public record
for this proceeding or the issuance of a
Notice of Schedule for Environmental
Review will serve to notify federal and
state agencies of the timing for the
completion of all necessary reviews, and
PO 00000
Frm 00013
Fmt 4703
Sfmt 4703
the subsequent need to complete all
federal authorizations within 90 days of
the date of issuance of the Commission
staff’s FEIS or EA.
Persons who wish to comment only
on the environmental review of this
project should submit an original and
two copies of their comments to the
Secretary of the Commission.
Environmental commenters will be
placed on the Commission’s
environmental mailing list, will receive
copies of the environmental documents,
and will be notified of meetings
associated with the Commission’s
environmental review process.
Environmental commenters will not be
required to serve copies of filed
documents on all other parties.
However, the non-party commenter will
not receive copies of all documents filed
by other parties or issued by the
Commission (except for the mailing of
environmental documents issued by the
Commission) and will not have the right
to seek court review of the
Commission’s final order.
The Commission strongly encourages
electronic filings of comments, protests
and interventions in lieu of paper using
the ‘‘eFiling’’ link at https://
www.ferc.gov. Persons unable to file
electronically should submit an original
and 5 copies of the protest or
intervention to the Federal Energy
Regulatory Commission, 888 First Street
NE., Washington, DC 20426.
Dated: June 27, 2014.
Kimberly D. Bose,
Secretary.
[FR Doc. 2014–15698 Filed 7–3–14; 8:45 am]
BILLING CODE 6717–01–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2014–0381; FRL–9911–22]
Certain New Chemicals; Receipt and
Status Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA) to
publish in the Federal Register a notice
of receipt of a premanufacture notice
(PMN); an application for a test
marketing exemption (TME), both
pending and/or expired; and a periodic
status report on any new chemicals
under EPA review and the receipt of
notices of commencement (NOC) to
manufacture those chemicals. This
document covers the period from May
23, 2013 to September 30, 2013.
SUMMARY:
E:\FR\FM\07JYN1.SGM
07JYN1
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
38289
B. What should I consider as I prepare
my comments for EPA?
under TSCA section 5 during this time
period.
III. What is the Agency’s authority for
taking this action?
I. General Information
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket ID
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions. The Agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at
your estimate in sufficient detail to
allow for it to be reproduced.
vi. Provide specific examples to
illustrate your concerns and suggest
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
A. Does this action apply to me?
II. What action is the Agency taking?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the PMNs addressed in this action.
This document provides receipt and
status reports, which cover the period
from May 23, 2013 to September 30,
2013, and consists of the PMNs and
TMEs both pending and/or expired, and
the NOCs to manufacture a new
chemical that the Agency has received
Comments identified by the
specific PMN number or TME number,
must be received on or before August 6,
2014.
DATES:
Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2014–0381,
and the specific PMN number or TME
number for the chemical related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at
https://www.epa.gov/dockets.
ADDRESSES:
For
technical information contact: Bernice
Mudd, Information Management
Division (7407M), Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001;
telephone number: (202) 564–8951;
email address: mudd.bernice@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
FOR FURTHER INFORMATION CONTACT:
mstockstill on DSK4VPTVN1PROD with NOTICES
SUPPLEMENTARY INFORMATION:
VerDate Mar<15>2010
15:59 Jul 03, 2014
Jkt 232001
PO 00000
Frm 00014
Fmt 4703
Sfmt 4703
Section 5 of TSCA requires that EPA
periodical publish in the Federal
Register receipt and status reports,
which cover the following EPA
activities required by provisions of
TSCA section 5.
EPA classifies a chemical substance as
either an ‘‘existing’’ chemical or a
‘‘new’’ chemical. Any chemical
substance that is not on EPA’s TSCA
Inventory is classified as a ‘‘new
chemical,’’ while those that are on the
TSCA Inventory are classified as an
‘‘existing chemical.’’ For more
information about the TSCA Inventory
go to: https://www.epa.gov/opptintr/
newchems/pubs/inventory.htm. Anyone
who plans to manufacture or import a
new chemical substance for a nonexempt commercial purpose is required
by TSCA section 5 to provide EPA with
a PMN, before initiating the activity.
Section 5(h)(1) of TSCA authorizes EPA
to allow persons, upon application, to
manufacture (includes import) or
process a new chemical substance, or a
chemical substance subject to a
significant new use rule (SNUR) issued
under TSCA section 5(a), for ‘‘test
marketing’’ purposes, which is referred
to as a test marketing exemption, or
TME. For more information about the
requirements applicable to a new
chemical go to: https://www.epa.gov/
oppt/newchems.
Under TSCA sections 5(d)(2) and
5(d)(3), EPA is required to publish in
the Federal Register a notice of receipt
of a PMN or an application for a TME
and to publish in the Federal Register
periodic status reports on the new
chemicals under review and the receipt
of NOCs to manufacture those
chemicals.
IV. Receipt and Status Reports
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: The EPA case
number assigned to the PMN, the date
the PMN was received by EPA, the
projected end date for EPA’s review of
the PMN, the submitting manufacturer/
importer, the potential uses identified
by the manufacturer/importer in the
PMN, and the chemical identity.
E:\FR\FM\07JYN1.SGM
07JYN1
38290
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
TABLE I—249 PMNS RECEIVED FROM 5/23/13 TO 9/30/13
Received date
Projected notice end date
Manufacturer/
Importer
Use
P–13–0467 ........
05/22/2013
08/20/2013
CBI ........................
05/23/2013
08/21/2013
Henkel Corporation
P–13–0494 ........
05/30/2013
08/28/2013
CBI ........................
(G) Curing Agent For Thermoset Resins.
(S) Site Limited Chemical Intermediate
To Cureable Monomer.
(G) Cleaning Fluid ................................
P–13–0468 ........
P–13–0495 ........
05/30/2013
08/28/2013
Wacker Chemicals
Corporation.
P–13–0496 ........
P–13–0497 ........
05/31/2013
05/31/2013
08/29/2013
08/29/2013
CBI ........................
Henkel Corporation
P–13–0498 ........
06/05/2013
09/03/2013
Henkel Corporation
(S) Hot melt Adhesives Used In Panel
Lamination And Other Assemblies.
P–13–0514 ........
06/04/2013
09/02/2013
Alberdingk Boley
Inc.
(S) Coatings For Wood And Plastic ....
P–13–0515 ........
06/04/2013
09/02/2013
Alberdingk Boley
Inc.
(S) Coatings For Wood And Plastic ....
P–13–0516 ........
06/04/2013
09/02/2013
Alberdingk Boley
Inc.
(S) Coatings For Wood And Plastic ....
P–13–0517 ........
06/04/2013
09/02/2013
CBI ........................
P–13–0518 ........
06/04/2013
09/02/2013
Alberdingk Boley
Inc.
(G) Processing Aid For Fuel Ethanol
Production.
(S) Polymer For Plastic Coatings ........
P–13–0519 ........
06/04/2013
09/02/2013
Alberdingk Boley
Inc.
(S) Polymer For Plastic Coatings ........
P–13–0520 ........
06/04/2013
09/02/2013
Alberdingk Boley
Inc.
(S) Coatings For Wood, Metal And
Plastic.
P–13–0521 ........
06/04/2013
09/02/2013
Alberdingk Boley
Inc.
(S) Coatings For Wood, Metal And
Plastic.
P–13–0522 ........
06/04/2013
09/02/2013
Alberdingk Boley
Inc.
(S) Coatings For Wood And Plastic ....
P–13–0554 ........
P–13–0555 ........
06/05/2013
06/05/2013
09/03/2013
09/03/2013
(G) Protective Treatment .....................
(G) Artificial Textile Production ............
P–13–0556 ........
06/07/2013
09/05/2013
3M Company ........
DIC International
(USA) LLC.
CBI ........................
P–13–0557 ........
06/06/2013
09/04/2013
CBI ........................
mstockstill on DSK4VPTVN1PROD with NOTICES
Case No.
VerDate Mar<15>2010
15:59 Jul 03, 2014
Jkt 232001
PO 00000
Frm 00015
(G) The Substance Is A Filler Used In
Fire Resistant Silicone Rubber
Blends.
(G) Additive For Paper .........................
(S) A Polymerizable Component Of
Adhesive And Sealant Formulations.
(G) Ingredient In Fragrances For Dispersive Use.
(S) Epoxy Curing Agent .......................
Fmt 4703
Sfmt 4703
Chemical
(G) Substituted Polysiloxane.
(S) Oxirane,[(1-Propenyloxy)Methyl]-(9ci).
(S) 1,3-Dioxolane-4-Methanol, 2-methyl-2-(2Methylpropyl)-.
(G) Metal Hydroxide, Treated With Alkenyl
Alkoxy Silane.
(G) Amophoteric Polyacrylamine.
(S)
2-Propenoic
Acid,
Butyl
Ester,
Homopolymer,
[(1-Oxo-2-Propen-1-Yl)Oxy]Terminated.
(S) Hexanedioic Acid, Polymer With 1,4Butanediol, 1,6-Hexanediol, Alpha-HydroOmega-Hydroxypoly[Oxy(Methyl-1,2Ethanediyl)],
1,1’-Methylenebis[4Isocyanatobenze] And 2-Oxepanone, 3–9
trimethoxysilyl)-1-Propanethiol-Blocked.
(G)
Alkyl
Carboxylic
Acid,
Hydroxy(Hydroxyalkyl)
Polymer
With
Methylenebis[Isocyanatocycloalkane],
Ditetrahydroxyalkane, Pentaacrylate-Blocked,
Compounds With Alkylmorpholine.
(G)
Alkyl
Carboxylic
Acid,
Hydroxy(Hydroxyalkyl),
Polymer
With
Diisocyanatoalkane,
Alkyldiamine
And
Methylenebis[Isocyanatocycloalkane],
Tetrahydroxyalkane Triacrylate-Blocked, Compounds With Trialkylamine.
(G)
Alkanedioic
Acid,
Polymer
With
(Haloalkyl)Oxirane,
(Hydroxyalkyl)-Alkyldiol,
(Alkylethylidene)Bis[Hydroxybenzene]
And
Oxirane-Alkenoate Polymer With Hydroxy(Hydroxyalkyl)-Alkanoic Acid And Isocyanato(Isocyanatoalkyl)-Cycloalkane,
Compound
With N,N-Dialkylalkylamine.
(S) 6-Phytase.
(G)
Alkanedioic
Acid,
Polymer
With
Diisocyanatoakane, Dimethyl-Alkyldiol, Hydroxy (Hydroxyalkyl)-Alkane Carboxylic Acid,
Methylenebis[Isocyanatoalkane] And Lactone
Compound. With Diethy Alkylamine.
(G) Unsatuated Fatty Acids, Dimers, Di-Me
Esters, Hydrogenated, Polymers With Alkyl
Dioic Acid, Diisocyanatocycloalkane, Hydroxy
(Hydroxymethyl)
Alkylcarboxylic
Acid,
Methylenebis[Isocyanatocycloalkane],
Alkyl
Glycol And Lactone Compound. With
Trialkylamine.
(G) Aromatic Dicarboxylic Acid, Polymer With
Cycloalkanemethanol,
Alkanediamine,
Alkanedioic Acid, Hydroxy-2-(Hydroxyalkyl)-2Alkylcarboxylic
Acid,
Methylenebis[Isocyanatocycloalkane]
And
(Methylethylidene)Bis)Phenyleneoxy)]Bis[Alkanol], Compound
With Dialkylamino Ethanol.
(G) Aromatic Dicarboxylic Acid, Polymer With
Alkanediamine, Alkane Dioic Acid, Alkanediol,
Hydroxy-2-(Hydroxymethyl)-2-Alkyl Carboxylic
Acid, Methylenebis [Isocyanatocycloalkane]
And
[(Alkylethylidene)
Bis(Phenyleneoxy)]Bis[Alkanol],
Compound
With Dialkylethanamine.
(G)
Alkanedioic
Acid,
Polymer
With
Aminoalkanol,
Alkanediol,
Alkyl(Hydroxyalkyl)Alkanediol, 1,X-Alkanediol, Hydroxy-(Hydroxyalkyl)Alkanoic
Acid,
Methylenebis[Isocyanatocycloalkane]
And
Alkene Carboxylic Acid, Compound. With
Alkylmorpholine.
(G) Fluorochemical Urethane.
(G) Polycarbonate Type Polyurethane Resin.
(G) Cycloalkene, Acetic Acid Alkylester.
(G) Tall Oil Fatty Acid, Compound With Cyclic
Amine.
E:\FR\FM\07JYN1.SGM
07JYN1
38291
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
TABLE I—249 PMNS RECEIVED FROM 5/23/13 TO 9/30/13—Continued
Received date
Projected notice end date
Manufacturer/
Importer
Use
Chemical
P–13–0558 ........
06/07/2013
09/05/2013
CBI ........................
(G) Humidity Barrier .............................
06/10/2013
09/08/2013
Reichhold Inc ........
(S) Wood Sealer; Concrete Sealer ......
P–13–0560 ........
06/10/2013
09/08/2013
(G) Solvent ...........................................
P–13–0563 ........
06/10/2013
09/08/2013
P–13–0564 ........
06/10/2013
09/08/2013
Eastman Chemicals Co.
The Dow Chemical
Company.
Henkel Corporation
P–13–0566 ........
05/30/2013
08/28/2013
CBI ........................
(S) Additive ..........................................
P–13–0567 ........
P–13–0568 ........
05/30/2013
06/07/2013
08/28/2013
09/05/2013
CBI ........................
CBI ........................
(G) Additive ..........................................
(G) Down Well Additive .......................
P–13–0569 ........
05/31/2013
08/29/2013
International Flavors & Fragrances Inc.
P–13–0570 ........
05/31/2013
08/29/2013
Gharda Chemicals
Limited.
P–13–0571 ........
05/31/2013
08/29/2013
Gharda Chemicals
Limited.
P–13–0572 ........
05/31/2013
08/29/2013
Gharda Chemicals
Limited.
P–13–0573 ........
06/12/2013
09/10/2013
Technolgies Zyvex
P–13–0574 ........
P–13–0575 ........
05/31/2013
06/13/2013
08/29/2013
09/11/2013
Canon USA Inc .....
CBI ........................
P–13–0594 ........
06/14/2013
09/12/2013
CBI ........................
(S) Fragrance Ingredient For Use In
Fragrances For Soaps, Detergents,
Cleaners And Other Household
Products.
(G) Manufacture Of Mechanical Parts,
Insulation, Valves, Heat Exchange
Parts, Oil Drilling, Aircraft Parts.
Manufacture Of Mechanical Parts, Insulation, Valves, Heat Exchange
Parts, Oil Drilling, Aircraft Parts.
(G) Manufacture Of Mechanical Parts,
Insulation, Valves, Heat Exchange
Parts, Oil Drilling, Aircraft Parts.
(G) Coating Attached To Carbon
Nanotubes.
(G) Component For Toner Use ...........
(S) Flame Retardant Additive For Use
In Plastics.
(G) Surfactant ......................................
(G) Alkylene Imine Homopolymer, Alkyl Derivatives.
(G) Amine Salt Of Vegetable Oil, Polymer With
Cycloaliphatic Glycol, Hydroxy Substituted
Carboxylic Acid, Aliphatic Diisocyanate And
Tetra Hydroxy Alkane.
(G) Aliphatic Ester Of A Modified Carboxylic
Acid.
(G) Polyalkylene Glycol, Alpha Isocyanate,
Omega Silane.
(S) Benzene, 1,4-Bis(1-Chloro-1-Methylethyl)-,
Reaction Products With Polyisobutylene,
Diallyl Terminated.
(S) Urea, N,N ″-1,6-Hexanediylbis[N’-[(1s)-1Phenylethyl]-.
(G) Ester Wax.
(G) Benzenesulfonic Acid, Dimethyl-, Alkyl Derivatives, Sodium Salt.
(S) 5h-Cyclopenta[H]Quinazoline, 6,6a,7,8,9,9aHexahydro-7,7,8,9,9-Pentamethyl-.
P–13–0559 ........
P–13–0595 ........
06/14/2013
09/12/2013
CBI ........................
(G) Surfactant ......................................
P–13–0615 ........
P–13–0616 ........
06/02/2013
05/30/2013
08/31/2013
08/28/2013
CBI ........................
CBI ........................
(G) Renewable Chemical Intermediate
(G) Cleaning Fluid ................................
P–13–0617 ........
06/06/2013
09/04/2013
CBI ........................
(G) Adhesive ........................................
P–13–0618 ........
06/06/2013
09/04/2013
CBI ........................
(G) Adhesive ........................................
P–13–0619 ........
06/06/2013
09/04/2013
CBI ........................
(G) Adhesive ........................................
P–13–0620 ........
06/13/2013
09/11/2013
CBI ........................
(G) Industrial Liquid Coatings ..............
P–13–0621 ........
06/13/2013
09/11/2013
CBI ........................
(G) Component Of Foam .....................
P–13–0622 ........
06/17/2013
09/15/2013
Gelest ....................
P–13–0624 ........
06/17/2013
09/15/2013
P–13–0625 ........
06/07/2013
09/05/2013
Halliburton Energy
Services Inc.
CBI ........................
P–13–0626 ........
06/19/2013
09/17/2013
CBI ........................
(S) Polymerized Into A Rubber Formulation; Research.
(S) Filter Cake Breaker For Oil/Gas
Wells.
(G) Reaction Modifier For Molding
Compounds.
(G) Dispersing Agent ...........................
mstockstill on DSK4VPTVN1PROD with NOTICES
Case No.
VerDate Mar<15>2010
15:59 Jul 03, 2014
Jkt 232001
PO 00000
Frm 00016
(G) Chemical Intermediate For Polyurethane Polymer.
(S) Site Limited Intermediate To
Functionalized Polymers.
Fmt 4703
Sfmt 4703
(G)
Poly(Oxy-1,4-Phenylenecarbonyl-1,4Phenylenecarbonyl-1,4-Phenylene.
(G)
Poly(Oxy-1,4-Phenylenecarbonyl-1,4Phenylenecarbonyl-1,4-Phenylene.
(G)
Poly
Polybenzimidazole.
(2,5-Benzimidazole),
(G) Polymer Of Terepthalic Acid And Ethyl Benzene With Mutiwalled Carbon Nanotube.
(G) Diester.
(G) Phosphonic Acid.
(G) Alkyl Oxirane, Polymer With Alkyl Oxirane
Sulfate Alkylethers, Alkali Salts.
(G) Alkyl Oxirane, Polymer With Alkyl Oxirane
Sulfate Alkylethers, Alkali Salts.
(G) Alkyl Alkanoate.
(S) 1,3-Dioxolane-4-Methanol, 2-methyl-2-(2Methylpropyl)-.
(G) Aromatic dicarboxylic Acid Polymer With
Alkanediol, Alkyl Alkyl-2-Alkenoate, 1,4-Dialkyl
Aromatic dicarboxylate, Alkanedioc Acid,
Alkanedioc Acid. Alkanediol, Alpha-HydroOmega-Hydroxypoly[Oxy(Alkyll-Alkanediyl)],
Hydroxyalkyl 2-Alkyl-2-Alkenoate, Aromatic
Diisocyanate, Alkyl 2-Alkyl-2-Alkenoate And 2Alkyl-2-Alkenoic Acid.
(G) Alkanedioic Acid, Polymer With Alkyl 2Alkyl-2-Alkenoate,
Alkanedioic
Acid,
Alkanediol,
Alpha-Hydro-OmegaHydroxypoly[Oxy(Alkyl-1
2-Alkanediyl)],
Hydroxyalkyl 2-Alkyl-2-Alkenoate, Aromatic
Diisocyanate, Alkyl 2-Alkyl-2-Alkenoate And 2Alkyl-2-Alkenoic Acid.
(G) Alkanedioic Acid, Polymer With Alkyl AlkylAlkenoate, Alkanedioic Acid, Alkanediol,
Alpha-Hydro-Omega-Hydroxypoly[Oxy(Alkyl1,2-Alkanediyl)], Aromatic Diisocyanate, Alkyl
Alkyl-Alkeneoate And Alkyl-Alkenoic Acid.
(G) Polymer Of Aliphatic Acids, Aliphatic Diols,
Aliphatic Polyols, Oligomeric Silsesquioxane,
And Aromatic Acids.
(G) Fatty Acid Polymer With Aliphatic Alcohol
And Aromatic Diacid.
(S) 1-Propanamine, 3-(Diethoxymethylsilyl)-N,NDimethyl-.
(S) Ethanol, 2,2’-Oxybis-,1,1′-Diformate.
(G) Metal Amine Salt.
(G) Alkenylic Acid, Alkyl Ester, Polymer With
Alkylaminoalkyl Alkenamide And Alkenyl Benzene, Ester With Alkyl Ethylene Glycol, Compound. With Chloro-Chloroalkyl Benzene.
E:\FR\FM\07JYN1.SGM
07JYN1
38292
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
TABLE I—249 PMNS RECEIVED FROM 5/23/13 TO 9/30/13—Continued
Received date
Projected notice end date
Manufacturer/
Importer
Use
Chemical
P–13–0628 ........
06/19/2013
09/17/2013
CBI ........................
(G) Pigment Dispersant .......................
05/30/2013
08/28/2013
Estron Chemical ...
(G) Industrial non-VOC Ultra Violet
(UV) cure Coatings.
P–13–0630 ........
06/20/2013
09/18/2013
CBI ........................
P–13–0633 ........
06/24/2013
09/22/2013
CBI ........................
(S) A Polymerizable Component In
Novel Adhesive/Sealant Formulations.
(G) Polyurethane Resin For Coating
Agent.
(G) Caprolactam, Polymer With Caprolactone,
Hydrogenphosphate, Phenylalkyl, Ester With
Alkyl Polyethylene Glycol.
(S) 2-Propenoic Acid, 2-Methyl-,Methyl Ester,
Polymer
With
Butyl
2-Propenoate,
Ethenylbenzene And 2-Oxiranylmethyl 2Methyl-2-Propenoate,
2-Propenoate,
1,1Dimethylpropyl
2-EthylhexaneperoxoateInitiated*.
(G) Silyl Modified Polymer.
P–13–0629 ........
P–13–0646
P–13–0647
P–13–0648
P–13–0649
P–13–0650
P–13–0651
........
........
........
........
........
........
06/24/2013
06/24/2013
06/24/2013
06/24/2013
06/24/2013
06/25/2013
09/22/2013
09/22/2013
09/22/2013
09/22/2013
09/22/2013
09/23/2013
CBI
CBI
CBI
CBI
CBI
CBI
P–13–0652 ........
06/25/2013
09/23/2013
Coatex Inc .............
P–13–0653 ........
06/25/2013
09/23/2013
CBI ........................
P–13–0654 ........
06/26/2013
09/24/2013
P–13–0655 ........
06/27/2013
09/25/2013
Hampford Research Inc.
Henkel Corporation
P–13–0656 ........
06/27/2013
09/25/2013
CBI ........................
P–13–0657 ........
06/26/2013
09/24/2013
Firmenich Inc ........
P–13–0658 ........
06/28/2013
09/26/2013
CBI ........................
P–13–0659 ........
06/28/2013
09/26/2013
Huntsman Corporation.
P–13–0667 ........
06/28/2013
09/26/2013
Henkel Corporation
P–13–0668 ........
06/28/2013
09/26/2013
CBI ........................
(G) Additive, Open, Non-Dispersive ....
P–13–0670 ........
07/01/2013
09/29/2013
CBI ........................
(G) Antioxidant .....................................
P–13–0671 ........
07/01/2013
09/29/2013
CBI ........................
(G) Antioxidant; (G) Additive For Rubber Goods To Improve Properties.
P–13–0672 ........
07/01/2013
09/29/2013
Shin Etsu Silicones
Of America.
(S) Law Material Of Amino-Modefied
Silicone.
P–13–0673 ........
07/01/2013
09/29/2013
CBI ........................
(S) Electrolyte For Energy Applications
P–13–0674 ........
P–13–0676 ........
07/02/2013
07/03/2013
09/30/2013
10/01/2013
CBI ........................
CBI ........................
(G) Open, Non-Dispersive ...................
(G) Polyurethane Resin For Coating
Agent.
P–13–0677 ........
07/03/2013
10/01/2013
CBI ........................
(G) Polyurethane Resin For Coating
Agent.
P–13–0678 ........
07/02/2013
09/30/2013
CBI ........................
P–13–0679 ........
07/02/2013
09/30/2013
CBI ........................
(G) Water And Oil Repellent For Plastic And Inorganic Substrates.
(G) Paper Treatment ............................
mstockstill on DSK4VPTVN1PROD with NOTICES
Case No.
VerDate Mar<15>2010
15:59 Jul 03, 2014
Jkt 232001
PO 00000
........................
........................
........................
........................
........................
........................
Frm 00017
(G) Tile Treatment ...............................
(G) Textile Treatment ...........................
(G) Tile Treatment ...............................
(G) Textile Treatment ...........................
(G) Open, Non-Dispersive ...................
(S) Water Borne Industrial Coatings
Like Metal Coatings; (S) Coatings
For Wood.
(G) Reactant Which Is Part Of A Polymer, Used As A Coating Additive
(Destructive Use).
(G) Component In Foam Insulation .....
(G) UV Curable Coating ......................
(S) Adhesives Used For Panel Bonding And Other Adhesive Assembly
applications.
(G) Process Aid For Composite Manufacturing..
(S) Aroma For Use In Fragrance Mixtures, Which In Turn Are Used In
Perfumes.
(G) Metallic Phosphate For Battery
Electrodes.
(S) Foam Stabilizer For Detergents In
Household And Industrial Multi-Surface Cleaners; (S) Foam Stabilizer
For Personal Care Products.
(S) A Polymerizable Component Of
Adhesive And Sealnt Formulations.
Fmt 4703
Sfmt 4703
(G) Siloxanes And Silicones, Di-Alkyl, 3-(2-Substituted) Alkyl Group-Terminated, Polymers
With 1,4-Alkanediol, Alkyl Diisocyanate, DiAlkyl
Carbonate,
2-Substituted
Heteromonocycle, 1,6-Alkanediol, Hydrazine,
3-Substituted-2-(Substituted)-2-Alkylpropanoic
Acid
And
Trialkyl
Carbomonocycle
Diisocyanate, Compounds. With Trialkylamine.
(G) Fluoroalkyl Acrylate Copolymer.
(G) Fluoroalkyl Acrylate Copolymer.
(G) Fluoroalkyl Acrylate Copolymer.
(G) Fluoroalkyl Acrylate Copolymer.
(G) Epoxy-Amine Adduct, Neutralized.
(G) Hexamethylenediisocyanate Homopolymer,
Alkoxy-Terminated.
(G) Cyclohexanol,
Derivs.
4-(C10–14-Branched
Alkyl)
(G) Fatty Acid Polymer With Aliphatic Alcohol
And Aromatic Diacid.
(G) Polyether Urethane Acrylate Oligomer.
(G)
Acrylic
Prepolymer.
Modified
Polyether-Polyester
(G) Phosphoric Acid, Mixed Alkyl Alcohol Esters,
Trialkanol Ammonium Salts.
(S) 2,6-Octandienal, 3,6,7-Trimethyl-.
(G) Lithium Metal Phosphate.
(S) Amides, Coco, N-(Hydroxyethyl)-N-Methyl.
(S) 2-Propenoic Acid, Butyl Ester, Polymer With
Ethyl
2-Propenoate
And
2Methoxyethylpropenoate, Reaction Products
With Acrylic Acid.
(S) Siloxanes And Silicones, Di-Me, Stearyl
Group-Terminated.
(G)
Alkyl-[4-(Carbomonocycle-substituted)Carbomonocycle]-(DialkylHydroxycarbomonocycle)Alkane Derivative.
(G)
Alkyl-[4-(Carbomonocycle-substituted)Carbomonocycle]-(DialkylHydroxycarbomonocycle)Alkane Derivative.
(S)
Siloxanes
And
Silicones,
3-[(2Aminoethyl)Amino]Propyl Methyl, HydroxyTerminated.
(S)
Pyrrolidinium,
1-Butyl-1-Methyl-,
Tetrakis(Cyano-Kc)Borate(1-) (1:1).
(G) Polycarbamoylsulfonate.
(G) 1,3-Dioxolan-2-One, Polymer With 5-Substituted-1,3,3Trialkylmonocarbocyclemethanamine,
1,4Alkanediol, 1,2-Alkanediol, 1,1′-Alkylenebis[4Substituted monocarbocycle] And 2-Alkyl-1,3Alkanediol.
(G) 1,3-Dioxolan-2-One, Polymer With 1,4Alkanediol, 1,2-Alkanediol, 1,1′-Alkylenebis[4Substituted monocarbocycle] And 2-Alkyl-1,3Alkanediol.
(G) Fluoroalkyl Methacrylate Copolymer.
(G) Fluoroalkyl Acrylate Copolymer.
E:\FR\FM\07JYN1.SGM
07JYN1
38293
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
TABLE I—249 PMNS RECEIVED FROM 5/23/13 TO 9/30/13—Continued
Received date
Projected notice end date
Manufacturer/
Importer
Use
P–13–0680 ........
P–13–0681 ........
P–13–0687 ........
07/03/2013
07/03/2013
07/08/2013
10/01/2013
10/01/2013
10/06/2013
10/08/2013
CBI ........................
CBI ........................
Compass Chemical
International LLC.
Henkel Corporation
(G) Renewable Chemical Intermediate
(G) For Use In External Can Coatings
(G) Oil And Gas Production; Industrial
Water Treatment.
(S) Isolated Intermediate To Function
Polyisobutylene Polymers.
P–13–0688 ........
07/10/2013
P–13–0689 ........
07/10/2013
10/08/2013
CBI ........................
P–13–0690 ........
07/11/2013
10/09/2013
P–13–0706 ........
07/11/2013
10/09/2013
JJI Technologies,
LLC.
Nano-C, Inc ...........
P–13–0707 ........
07/11/2013
10/09/2013
Nano-C, Inc ...........
P–13–0708
P–13–0709
P–13–0710
P–13–0711
P–13–0712
P–13–0713
P–13–0714
07/12/2013
07/12/2013
07/12/2013
07/12/2013
07/12/2013
07/12/2013
07/15/2013
10/10/2013
10/10/2013
10/10/2013
10/10/2013
10/10/2013
10/10/2013
10/13/2013
CBI
CBI
CBI
CBI
CBI
CBI
CBI
(G) Material For Fiber, Monofilament,
Sheet, Film; Molding Material For
Agriculture, Food Package, Const.
(S) Flame Retardant For Industrial
Plastics.
(S) Additive For Fibers In Fabrics; (S)
Additive For Fibers In Structural And
Electrical uses; Additive For Transparency And Conductivity Additive In
Lubricants And Grease; Additive To
Improve The Strength And Durability
Of Materials; Catalyst Support In
Fuel Cells; Coating Additive To Improve Corrosion Resistance Use As
A Nanoporous Network; (S) Use As
A Semi-Conductor, Conductive, Or
Resistive Element; Use As An
Electromechanical Switch, Use In
Film Laminates To Improve Conductivity, Use In Film Laminates To Improve Structural, Electrical, Or Electrochemical Properties; (S) Use With
Materials To Improve Mechanical
Properties Or Electrical Conductivities(S) Additive For Fibers In Fabrics; (S) Additive For Fibers In Structural And Electrical uses; (S) Additive For Transparency And Conductivity; (S) Additive In Lubricants And
Grease; (S) Additive To Improve
material Strength; (S) Catalyst Support In Fuel Cells; (S) Coating Additive for Improve Corrosion Resistance; (S) Use As A Nanoporous
Network; (S) Use As A Semi-Conductor, Conductive, Or Resistive; (S)
Use As An Electromechanical
Switch; (S) Use In Film Laminates
To Improve Structural, Electrical, Or
Electrochemical Properties Of Composite; (S) Use In Separation Of
Chemicals; (S) Use With Materials
for Mechanical Properties.
(S) Additive For Fibers In Fabrics; (S)
Additive For Fibers In Structural And
Electrical uses; (S) Additive For
Transparency And Conductivity; (S)
Additive In Lubricants And Grease;
(S) Additive To Improve material
Strength; (S) Catalyst Support In
Fuel Cells; (S) Coating Additive for
Improve Corrosion Resistance; (S)
Use As A Nanoporous Network; (S)
Use As A Semi-Conductor, Conductive, Or Resistive; (S) Use As An
Electromechanical Switch; (S) Use
In Film Laminates To Improve Structural, Electrical, Or Electrochemical
Properties Of Composite; (S) Use In
Separation Of Chemicals; (S) Use
With Materials for Mechanical Properties.
(G) Lubricant Additive ..........................
(G) Lubricant Additive ..........................
(G) Lubricant Additive ..........................
(G) Lubricant Additive ..........................
(G) Lubricant Additive ..........................
(G) Lubricant Additive ..........................
(G) Destructive And Contained Use ....
mstockstill on DSK4VPTVN1PROD with NOTICES
Case No.
........
........
........
........
........
........
........
VerDate Mar<15>2010
15:59 Jul 03, 2014
Jkt 232001
PO 00000
........................
........................
........................
........................
........................
........................
........................
Frm 00018
Fmt 4703
Sfmt 4703
Chemical
(G) Alkyl Alkenoate.
(G) Phosphate Ester.
(G) Aminophosphonate Salt.
(S) Benzene, 1,4-Bis(1-Chloro-1-Methylethyl) -,
Reaction Products With Polyisobutylene,
Bis(3-Hydroxypropyl)-Terminated.
(G) Alkanedioic Acid, Polymer With Butanedioic
Acid,
Alkanediol
And
2-Substituted
Alkanedioic Acid.
(G) Aluminum Phosphate.
(G) Single-Walled Carbon Nanotubes.
(G) Single-Walled Carbon Nanotubes.
(G)
(G)
(G)
(G)
(G)
(G)
(G)
E:\FR\FM\07JYN1.SGM
Zinc Dialkyldithiocarbamate.
Zinc Dialkyldithiocarbamate.
Zinc Dialkyldithiocarbamate.
Zinc Dialkyldithiocarbamate.
Zinc Dialkyldithiocarbamate.
Zinc Dialkyldithiocarbamate.
Carbopolycycle Bis(Amine Monocycle).
07JYN1
38294
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
TABLE I—249 PMNS RECEIVED FROM 5/23/13 TO 9/30/13—Continued
Received date
Projected notice end date
Manufacturer/
Importer
Use
P–13–0715 ........
07/11/2013
10/09/2013
CBI ........................
07/11/2013
10/09/2013
CBI ........................
P–13–0717 ........
07/15/2013
10/13/2013
CBI ........................
(S) Additive For Fibers In Fabrics; (S)
Additive For Fibers In Structural And
Electrical uses; (S) Additive For
Transparency And Conductivity; (S)
Additive In Lubricants And Grease;
(S) Additive To Improve material
Strength; (S) Catalyst Support In
Fuel Cells; (S) Coating Additive for
Improve Corrosion Resistance; (S)
Use As A Nanoporous Network; (S)
Use As A Semi-Conductor, Conductive, Or Resistive; (S) Use As An
Electromechanical Switch; (S) Use
In Film Laminates To Improve Structural, Electrical, Or Electrochemical
Properties Of Composite; (S) Use In
Separation Of Chemicals; (S) Use
With Materials for Mechanical Properties.
(S) Additive For Fibers In Fabrics; (S)
Additive For Fibers In Structural And
Electrical uses; (S) Additive For
Transparency And Conductivity; (S)
Additive In Lubricants And Grease;
(S) Additive To Improve material
Strength; (S) Catalyst Support In
Fuel Cells; (S) Coating Additive for
Improve Corrosion Resistance; (S)
Use As A Nanoporous Network; (S)
Use As A Semi-Conductor, Conductive, Or Resistive; (S) Use As An
Electromechanical Switch; (S) Use
In Film Laminates To Improve Structural, Electrical, Or Electrochemical
Properties Of Composite; (S) Use In
Separation Of Chemicals; (S) Use
With Materials for Mechanical Properties.
(G) Destructive And Contained Use ....
P–13–0716 ........
P–13–0718 ........
07/11/2013
10/09/2013
Nano-C, Inc ...........
P–13–0719 ........
07/11/2013
10/09/2013
Nano-C, Inc ...........
mstockstill on DSK4VPTVN1PROD with NOTICES
Case No.
VerDate Mar<15>2010
15:59 Jul 03, 2014
Jkt 232001
PO 00000
Frm 00019
Additive For Fibers In Fabrics; (S) Additive For Fibers In Structural And
Electrical uses; Additive For Transparency And Conductivity Additive In
Lubricants And Grease; Additive To
Improve The Strength And Durability
Of Materials; Catalyst Support In
Fuel Cells; Coating Additive To Improve Corrosion Resistance Use As
A Nanoporous Network; (S) Use As
A Semi-Conductor, Conductive, Or
Resistive Element; Use As An
Electromechanical Switch, Use In
Film Laminates To Improve Conductivity, Use In Film Laminates To Improve Structural, Electrical, Or Electrochemical Properties.
..............................................................
Fmt 4703
Sfmt 4703
Chemical
(G) Single-Walled Carbon Nanotubes.
(G) Single-Walled Carbon Nanotubes.
(G) Carbopolycycle Bis(Substituted
Monocycle.
(G) Single-Walled Carbon Nanotubes.
(G) Single-Walled Carbon Nanotubes.
E:\FR\FM\07JYN1.SGM
07JYN1
Amine
38295
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
TABLE I—249 PMNS RECEIVED FROM 5/23/13 TO 9/30/13—Continued
Received date
Projected notice end date
Manufacturer/
Importer
Use
P–13–0720 ........
07/11/2013
10/09/2013
Nano-C, Inc ...........
07/11/2013
10/09/2013
Nano-C, Inc ...........
P–13–0722 ........
P–13–0724 ........
P–13–0725 ........
07/12/2013
07/17/2013
07/16/2013
10/10/2013
10/15/2013
10/14/2013
CBI ........................
CBI ........................
Allnex USA Inc ......
(S) Additive For Fibers In Fabrics; (S)
Additive For Fibers In Structural And
Electrical Applications; (S) Additive
For Transparency And Conductivity
In Electronic Devices; (S) Additive In
Lubricants And Grease To Improve
Wear Resistance; (S) Additive To
Improve The Strength And Durability
Of Materials And Batteries; (S) Catalyst Support For Use In Fuel Cells;
(S) Coating Additive To Improve
Corrosion Resistance Of Metals; (S)
Use As A Nanoporous Network In
Gas Diffusion Layers; (S) Use As A
Semi-Conductor, Conductive, Or Resistive Element In Electronic Circuitry And Devices; (S) Use As An
Electromechanical Switch In Electronic Circuitry And Devices; (S) Use
In Film Laminates To Improve Conductivity In Batteries, Capacitors,
And Fuel Cells; (S) Use In Film
Laminates To Improve Structural,
Electrical, Or Electrochemical Properties Of Composite; (S) Use In
Separation Of Chemicals; (S) Use
With Materials To Improve Mechanical Properties Or Electrical Conductivities.
(S) Additive For Fibers In Fabrics; (S)
Additive For Fibers In Structural And
Electrical Applications; (S) Additive
For Transparency And Conductivity
In Electronic Devices; (S) Additive In
Lubricants And Grease To Improve
Wear Resistance; (S) Additive To
Improve The Strength And Durability
Of Materials And Batteries; (S) Catalyst Support For Use In Fuel Cells;
(S) Coating Additive To Improve
Corrosion Resistance Of Metals; (S)
Use As A Nanoporous Network In
Gas Diffusion Layers; (S) Use As A
Semi-Conductor, Conductive, Or Resistive Element In Electronic Circuitry And Devices; (S) Use As An
Electromechanical Switch In Electronic Circuitry And Devices; (S) Use
In Film Laminates To Improve Conductivity In Batteries, Capacitors,
And Fuel Cells; (S) Use In Film
Laminates To Improve Structural,
Electrical, Or Electrochemical Properties Of Composite; (S) Use In
Separation Of Chemicals; (S) Use
With Materials To Improve Mechanical Properties Or Electrical Conductivities.
(G) Polymer Additive ............................
(G) Coating Component .......................
(S) Coating Resin For Substrate Protection And Aesthetics.
P–13–0721 ........
P–13–0726 ........
07/16/2013
10/14/2013
Genagain Technologies, LLC.
(S) Additive To Diesel Fuel ..................
P–13–0747 ........
P–13–0748 ........
07/18/2013
07/18/2013
10/16/2013
10/16/2013
CBI ........................
Zyvex Technolgies
P–13–0751 ........
07/18/2013
10/16/2013
CBI ........................
(G) Antioxidant/Stabilizer For Plastic ...
(G) Coating Attached To Carbon
Nanotubes.
(G) Polymeric Colorant ........................
mstockstill on DSK4VPTVN1PROD with NOTICES
Case No.
VerDate Mar<15>2010
15:59 Jul 03, 2014
Jkt 232001
PO 00000
Frm 00020
Fmt 4703
Sfmt 4703
Chemical
(G) Single-Walled Carbon Nanotubes.
(G) Single-Walled Carbon Nanotubes.
(G) Quaternary Alkyl Ammonium Sulfonimide.
(G) Polyurethane Prepolymer.
(G) Alkanedioc Acid, Polymer With Substituted
Oxirane
Polymer
With
Substituted
Carbomonocyle, Di-Substituted Alkane, Substituted
Alkanoic
Acid,
Substituted
Cycloalkane And Substituted Alkoxylated
Glycerol.
(S) Waste Plastics, Pyrolyzed, Depolymd., AcidFree, C6–21 Fraction. Definition: A Complex
Combination Of Hydrocarbons Obtained By
The Distillation Of A Waste Plastics Feed
Under Vacuum Usingwiped-Film Evaporation.
Is Consists Predominately Of C6 To C21
Branched And Linear Hydrocarbons, And
ˆ
ˆ
Boils In The range Of 50 A°C To 320 A°C
ˆ
ˆ
(122 A°F To 608 A°F).
(G) Mixed Alkyl Phenyl Phosphite.
(G) Polymer Of Terepthalic Acid And Ethyl Benzene With Mutiwalled Carbon Nanotube.
(G) Polyether Substituted Polymeric Colorant.
E:\FR\FM\07JYN1.SGM
07JYN1
38296
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
TABLE I—249 PMNS RECEIVED FROM 5/23/13 TO 9/30/13—Continued
Received date
Projected notice end date
Manufacturer/
Importer
Use
Chemical
P–13–0752 ........
07/19/2013
10/17/2013
Allnex USA Inc ......
07/23/2013
07/24/2013
07/25/2013
10/21/2013
10/22/2013
10/23/2013
(G) Substituted Polyethylene Glycol Monomethy
Ether.
(G) Alkylphenol.
(G) Hydrocarbon Feedstock.
(G) Substituted Picolinic Acid.
P–13–0768 ........
07/25/2013
10/23/2013
CBI ........................
CBI ........................
The Dow Chemical
Company.
CBI ........................
(S) Isolated Intermediate For Manufacture Of A Coating Resin.
(S) Intermediate Reaction Product ......
(G) Hydrocarbon Feedstock ................
(G) Chemical Intermediate ...................
P–13–0754 ........
P–13–0766 ........
P–13–0767 ........
(G) The new substance is intended for
use as a binder for industrial waterborne coating applications.
P–13–0769 ........
P–13–0770 ........
07/25/2013
07/26/2013
10/23/2013
10/24/2013
CBI ........................
CBI ........................
(G) Phenol, (Alkylidene)Bis-, Polymer With
(Chloroalkyl)Oxirane,
Alkenoate,
Bis(Hydroxyalkyl)Alkanoic
Acid,
Hydroxyalkylacrylate, Alkyl Polyalkyleneglycol,
Benzenedicarboxylic Acid, Polymer With
Alkanedioic Acid And Alkanediol, Alkanediol,
Alkane,
Diisocyanato-,
Homopolymer,
Isocyanatoalkyltrialkylcycloalkyl
Isocyanate
And Alkylene Diisocyanate.
(G) Calcium Salt Of Aldehyde Resins.
(G) Latex Polymer.
P–13–0771 ........
P–13–0772 ........
07/26/2013
07/31/2013
10/24/2013
10/29/2013
CBI ........................
Huntsman ..............
P–13–0773 ........
P–13–0774 ........
07/31/2013
07/31/2013
10/29/2013
10/29/2013
CBI ........................
CBI ........................
P–13–0775 ........
07/31/2013
10/29/2013
CBI ........................
P–13–0779 ........
07/31/2013
10/29/2013
CBI ........................
P–13–0780 ........
08/01/2013
10/30/2013
CBI ........................
P–13–0781 ........
08/01/2013
10/30/2013
Henkel Corporation
P–13–0782 ........
08/01/2013
10/30/2013
CBI ........................
P–13–0786 ........
08/01/2013
10/30/2013
CBI ........................
P–13–0787 ........
08/01/2013
10/30/2013
Syngenta Crop
Protection LLC.
P–13–0788 ........
08/02/2013
10/31/2013
Allnex USA Inc ......
(G) Oil And Water Repellent And Release Agent.
(S) Site Limited Intermediate To
Cureable Monomers.
(G) Reactive Prepolymer For Polyurethane Dispersions, Adhesives,
Sealants And Elastomers.
(S) Pigment For Automotive Coatings
To Be Used In Automotive Oem And
Refinish.
(G) Imported And Site Limited Raw
Material, Used In The Manufacture
Of An EPA FIFRA Registerred
Pesticid.
(G) Resin For Inks ...............................
P–13–0789 ........
08/02/2013
10/31/2013
Allnex USA Inc ......
(G) Resin For Inks ...............................
P–13–0793 ........
08/02/2013
10/31/2013
CBI ........................
P–13–0794 ........
08/02/2013
10/31/2013
CBI ........................
P–13–0796 ........
08/05/2013
11/03/2013
CBI ........................
P–13–0797 ........
08/05/2013
11/03/2013
CBI ........................
P–13–0798 ........
08/05/2013
11/03/2013
CBI ........................
P–13–0799 ........
08/05/2013
11/03/2013
CBI ........................
P–13–0800 ........
08/05/2013
11/03/2013
CBI ........................
P–13–0803 ........
08/04/2013
11/02/2013
CBI ........................
(S) Thin Film For Electronic Device
Applications.
(G) Additive, Open, Non-Dispersive
Use.
(G) Additive For Polymer Manufacturing.
(G) Additive For Polymer Manufacturing.
(G) Additive For Polymer Manufacturing.
(G) Additive For Polymer Manufacturing.
(G) Additive For Polymer Manufacturing.
(G) Assembly Adhesive .......................
mstockstill on DSK4VPTVN1PROD with NOTICES
Case No.
VerDate Mar<15>2010
15:59 Jul 03, 2014
Jkt 232001
PO 00000
Frm 00021
(G) Printing Inks ...................................
(G) Adhesive For Electrical Industry
Use.
(G) Colorant For Polyolefins ................
(G) Curing Agent ..................................
(S) Herbicide Intermediate ...................
(S) Pour Point Depressant For Use In
Oil. Dispersant For Use In Oil.
(G) Used In The Manufacture Of An
Article.
(G) Assembly Adhesive .......................
Fmt 4703
Sfmt 4703
(G) Anthraquinone Polyamide.
(G) Fatty Acids, C16–18 And C18-Unsatuated,
Polymers With Ethyleneamine, Alkoxylated
Derivs.
(S) 4-Pyrimidianamine, 2,5 Dimethoxy.
(G) Acrylic Polymer.
(G) Polyamic Acid.
(G) Isocyanic Acid, Polymethylenepolyphenylene
Ester, Polymer With Substituted Bisphenol
And Substituted Diepoxide.
(G) Fluorinated Acrylic Copolymer.
(S) 4-Phenoxybutyl Bromide.
(G) Polyester Polyol.
(G) Substituted Alkylsilanes, Reaction Products
With Aluminum, Metal Oxide, Silica And Tin
Oxide (Sno2).
(S) Benzenamine, 2-Ethyl-N-[(1s)-2-Methoxy-1Methylethyl]-6-Methyl-.
(G) Substituted Alkanediol, Polymer With
Heteromonocycles,
Substituted
Carbomonocycle Alkenoate, Reaction Products With Dialkylamine.
(G) Substituted Alkanediol, Polymer With
Heteromonocycles,
Substituted
Carbomonocycle Alkenoate, Reaction Products With Dialkylamine.
(G) Functionalized Carbon Nanotubes.
(G)
Poly(Alkylmethacrylate-CoDimethylaminoethylmethacrylate).
(G) Dicarbomonocycle-Substituted Carbomono
cycledicarboxamide.
(G) Dicarbomonocycle-Substituted Carbomono
cycledicarboxamide.
(G) Dicarboheterocycle-Substituted Carbomono
cycledicarboxamide.
(G) Dicarbomonocycle-Substituted Carbomono
cycledicarboxamide.
(G) Tricarbomonocycle-Substituted Carbomono
cycletricarboxamide.
(G),(G) Polymer With Aromatic Diacids, Alkylene
Diacid,
Substituted
Alkylene
Diol,
Unsubstituted
Alkylene
Diol
And
Polymethylenepolyphenylene
Isocyanate
Isocyanic Acid, Polymethylenepolyphenylene
Ester, Polymer With Substituted Bisphenol
And Substituted Diepoxide Isocyanic Acid,
Polymethylenepolyphenylene Ester, Polymer
With Unsubstituted Alkylene Diol, Substituted
Alkylene Diol And Cyclic Alkylene Ester.
E:\FR\FM\07JYN1.SGM
07JYN1
38297
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
TABLE I—249 PMNS RECEIVED FROM 5/23/13 TO 9/30/13—Continued
Received date
Projected notice end date
Manufacturer/
Importer
P–13–0804 ........
08/05/2013
11/03/2013
P–13–0805 ........
08/06/2013
P–13–0806 ........
Use
Chemical
Kaneka North
America LLC.
(G) Surface Active Agent .....................
11/04/2013
CBI ........................
08/07/2013
11/05/2013
Mane USA ............
08/06/2013
08/06/2013
11/04/2013
11/04/2013
P–13–0809 ........
08/06/2013
11/04/2013
CBI ........................
Hampford Research, Inc.
CBI ........................
(G) Used as a Receptive Coating In
Ink-Jet Printing.
(S) Refreshing Agent in Cosmetic
Products.
(G) Lubricant Additive ..........................
(G) UV Curable Coating ......................
(S) A Cyclic Oligopeptide Produced By The Fermentation Of Carbon And Nitrogen Sources
(Such As Soybean Meal, Glucose,Maltose)
Using Bacillus Subtillis. The Product Is The
Sodium Salt Of The Polypeptide. The Individual Residues Include:L-Glutamic Acid, DLeucine, L-Leucine, L-Valine, L-Aspartic Acid,
L-Isoleucine And .Beta.-Hydroxy C12–17
Branchedalkanoic Acids.
(G) Polu(Urethane Urea).
P–13–0807 ........
P–13–0808 ........
P–13–0810 ........
08/07/2013
11/05/2013
CBI ........................
(S) Acrylic Resin Used In UV Curable
Inks And Coatings.
(G) Inhibitor For Oil Field Applications
P–13–0811 ........
08/07/2013
11/05/2013
CBI ........................
(G) Inhibitor For Oil Field Applications
P–13–0812 ........
08/07/2013
11/05/2013
CBI ........................
(G) Inhibitor For Oil Field Applications
P–13–0813 ........
08/07/2013
11/05/2013
CBI ........................
(G) Inhibitor For Oil Field Applications
P–13–0814 ........
08/07/2013
11/05/2013
CBI ........................
(G) Inhibitor For Oil Field Applications
P–13–0815 ........
08/07/2013
11/05/2013
CBI ........................
(G) Inhibitor For Oil Field Applications
P–13–0816 ........
08/07/2013
11/05/2013
CBI ........................
(G) Inhibitor For Oil Field Applications
P–13–0817 ........
08/07/2013
11/05/2013
CBI ........................
(G) Inhibitor For Oil Field Applications
P–13–0818 ........
08/07/2013
11/05/2013
CBI ........................
(G) Inhibitor For Oil Field Applications
P–13–0819 ........
08/07/2013
11/05/2013
CBI ........................
(G) Inhibitor For Oil Field Applications
P–13–0820 ........
08/07/2013
11/05/2013
CBI ........................
(G) Inhibitor For Oil Field Applications
P–13–0821 ........
08/07/2013
11/05/2013
CBI ........................
(G) Inhibitor For Oil Field Applications
P–13–0822 ........
08/07/2013
11/05/2013
CBI ........................
P–13–0823 ........
P–13–0824 ........
08/08/2013
08/08/2013
11/06/2013
11/06/2013
CBI ........................
CBI ........................
(G) Additive, Open, Non-Dispersive
Use.
(G) Rubber Products ............................
(G) Molding Material For Film, Sheet,
Plates, Interior, Cases.
P–13–0825 ........
P–13–0826 ........
08/09/2013
08/09/2013
11/07/2013
11/07/2013
CBI ........................
CBI ........................
P–13–0827 ........
P–13–0830 ........
08/12/2013
08/12/2013
11/10/2013
11/10/2013
CBI ........................
Alberdingk Boley
Inc.
P–13–0831 ........
mstockstill on DSK4VPTVN1PROD with NOTICES
Case No.
08/12/2013
11/10/2013
Alberdingk Boley
Inc.
(S) Wood Coatings ..............................
P–13–0832 ........
08/12/2013
11/10/2013
Alberdingk Boley
Inc.
(S) Wood Coatings ..............................
VerDate Mar<15>2010
15:59 Jul 03, 2014
Jkt 232001
PO 00000
Frm 00022
(G) Coating Material ............................
(S) Thermoplastic Urethanes For
Recreation, Industrial, Oil, Gas, And
Mining Applications.
(G) Lubricating Oil Additive ..................
(S) Wood Coatings ..............................
Fmt 4703
Sfmt 4703
(S) Butanedioic Acid, 1-[ (1r, 2s, 5r)-5-Methyl-2(1-Methylethyl) Cyclohexyl ] Ester.
(G) Calcium Alkyl Salicylate.
(G) Polyether Urethane Acrylate Oligomer.
(G) Melamine Acrylate.
(G) Cycloalkylamino Oleylalkyl Alkylamide Acid
Salt.
(G) Cycloalkylamino Oleylalkyl Alkylamide Acid
Salt.
(G) Cycloalkylamino Oleylalkyl Alkylamide Acid
Salt.
(G) Cycloalkylamino Oleylalkyl Alkylamide Acid
Salt.
(G) Cycloalkylamino Oleylalkyl Alkylamide Acid
Salt.
(G) Cycloalkylamino Oleylalkyl Alkylamide Acid
Salt.
(G) Cycloalkylamino Cocoalkyl Alkylamide Acid
Salt.
(G) Cycloalkylamino Cocoalkyl Alkylamide Acid
Salt.
(G) Cycloalkylamino Cocoalkyl Alkylamide Acid
Salt.
(G) Cycloalkylamino Cocoalkyl Alkylamide Acid
Salt.
(G) Cycloalkylamino Cocoalkyl Alkylamide Acid
Salt.
(G) Cycloalkylamino Cocoalkyl Alkylamide Acid
Salt.
(G) Polyether Modified Acrylic Ester Polymer
With Dimethylamino Groups.
(G) Fluoroelastomer.
(G) D-Glucitol, 1,4:3,6-Dianhydro-, Polymer With
1,4-Cycloalkanedimethanol And Diphenyl Carbonate.
(G) Polyurethane.
(S) 2-Oxepanone, Polymer With 1,4-Butanediol,
1,4-Disocyanatobenzene And 2,2-Dimethyl1,3-Propanediol.
(G) Alkyl Borate Esters And Ethers.
(G) Dicarboxylic Acid, Polymer With Cycloalkyl
Alkyl-2-Alkennoate, N-(Dimethyl-Oxoalkyl)-2Alkyenamide,
Alkanediol,
.Alpha.-Hydro.Omega.-Hydroxypoly[Oxyalkanediyl],
3-Hydroxy-2-(Hydroxymethyl)-Alkyl
Carboxylic
Acid,
Isocyanato-(Isocyanatoalkyl)Trimethylcycloalkane And Methylalkenoate,
Alkyl Hydroperoxide-Initiated, Compounds
with Tralkyllamine Aaa.
(G) Dicarboxylic Acid, Polymer With N-(DialkylOxoalkyl)-Alkennamide,
Alkanediol,
Alkanediol, Hydroxy-(Hydroxyalkyl)-Alkyl Carboxylic Acid, Isocyanato-(Isocyanatoalkyl)Trimethylcycloalkane,
Methylenebis[Isocyanatocycloalkane]
And
Alkyl Alkyl-Alkenoate, Compounds with
Dialkylalkylamine.
(G) Dicarboxylic Acid, Polymer With Cycloalkyl
Alkyl-Alkenoate,
N-(Dialkyl-Oxoalkyl)Alkenamide,
Alkanediol,
Hydroxy—
(Hydroxyalkyl)-Alkyl
Carboxylic
Acid,
Methylenebis[Isocyanatocycloalkane]
And
Alkyll Alkenoate, Alkyl Hydroperoxide-Initiated,
Compounds with Dialkylalkylamine.
E:\FR\FM\07JYN1.SGM
07JYN1
38298
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
TABLE I—249 PMNS RECEIVED FROM 5/23/13 TO 9/30/13—Continued
Received date
Projected notice end date
Manufacturer/
Importer
Use
Chemical
P–13–0833 ........
08/12/2013
11/10/2013
CBI ........................
(G) Assembly Adhesive .......................
08/13/2013
11/11/2013
CBI ........................
(G) Polymeric Colorant ........................
P–13–0835 ........
P–13–0836 ........
P–13–0837 ........
08/13/2013
08/14/2013
08/14/2013
11/11/2013
11/12/2013
11/12/2013
CBI ........................
CBI ........................
CBI ........................
P–13–0839 ........
08/14/2013
11/12/2013
CBI ........................
(S) Polyurethane Prepolymer ..............
(G) Ultra violet Catalyst .......................
(G) Component In Drilling Fluids;
Component In Resin Coatings.
(G) Ingredient Of Pre-Coat Solution ....
(G);
Isocyanic
Acid,
Polymethylenepolyphenylene Ester, Polymer
With Unsubstituted Alkylene Diol, Substituted
Alkylene Diol And Cyclic Alkylene Ester,(G)
Isocyanic Acid, Polymethylenepolyphenylene
Ester, Polymer With Substituted Bisphenol
And Substituted Diepoxide,(G) Polymer With
Aromatic Diacids, Alkylene Diacid, Substituted
Alkylene Diol, Unsubstituted Alkylene Diol And
Polymethylenepolyphenylene Isocyanate.
(G) Polyalkoxylated Polycyclic Aromatic Amine
Colorant.
(G) Aliphatic Polyester Polyol.
(G) Alkyl Carbonyl Alkyl Ether Metal Complex.
(G) Amine Capped Fatty Acid Dimer Polyamide.
P–13–0834 ........
P–13–0840 ........
08/15/2013
11/13/2013
Colonial Chemical,
Inc.
(S) Oil Dispersant ................................
P–13–0841 ........
08/15/2013
11/13/2013
Colonial Chemical,
Inc.
P–13–0842 ........
08/15/2013
11/13/2013
CBI ........................
(S) Intermediate For Surfactant Production; Chemical Intermediate For
Sale Into Commerce.
(G) Hydraulic Fracturing Chemical ......
P–13–0843 ........
08/15/2013
11/13/2013
CBI ........................
(G) Hydraulic Fracturing Chemical ......
P–13–0846 ........
08/19/2013
11/17/2013
Allnex USA Inc ......
(G) Crosslinker For Coatings ...............
P–13–0847 ........
08/19/2013
11/17/2013
Allnex USA Inc ......
(G) Resin For Waterborne Coatings ....
P–13–0848 ........
08/02/2013
10/31/2013
P–13–0849 ........
08/19/2013
11/17/2013
Akzo Nobel Coatings, Inc.
CBI ........................
P–13–0851 ........
P–13–0852 ........
08/26/2013
08/26/2013
11/24/2013
11/24/2013
CBI ........................
CBI ........................
(S) To Be Used As A Coating By Body
Shops For Vehicles.
(G) Adhesive For Electrical Industry
Use.
(G) Lubricant Additive ..........................
(G) One Component Urethane Adhesive.
P–13–0853 ........
08/26/2013
11/24/2013
CBI ........................
P–13–0854 ........
P–13–0856 ........
08/27/2013
08/27/2013
11/25/2013
11/25/2013
CBI ........................
CBI ........................
(G) Polymer Additive For Plastic Compounds.
(G) Petroleum Production Chemical ....
(G) Foam Insulation .............................
P–13–0858 ........
P–13–0859 ........
P–13–0860 ........
08/27/2013
08/28/2013
08/27/2013
11/25/2013
11/26/2013
11/25/2013
CBI ........................
CBI ........................
Alberdingk Boley
Inc.
(G) Component For Toner Use ...........
(G) Component For Toner Use ...........
(S) Good Adhesion Properties For
Plastic Coatings.
P–13–0861 ........
08/27/2013
11/25/2013
Alberdingk Boley
Inc.
(S) Good Adhesion Properties For
Plastic Coatings.
P–13–0862 ........
08/28/2013
11/26/2013
CBI ........................
(G) Component Of Polymer Film .........
P–13–0863 ........
08/28/2013
11/26/2013
CBI ........................
P–13–0864 ........
P–13–0865 ........
08/28/2013
08/28/2013
11/26/2013
11/26/2013
CBI ........................
CBI ........................
(G) Used In The Manufacture Of An
Article.
(G) Chemical Intermediate ...................
(G) Coating Additive (Open, Non-Dispersive Use).
P–13–0866 ........
08/28/2013
11/26/2013
Firmenich Inc ........
mstockstill on DSK4VPTVN1PROD with NOTICES
Case No.
VerDate Mar<15>2010
15:59 Jul 03, 2014
Jkt 232001
PO 00000
Frm 00023
(S) Fragrance Ingredient For The Use
In Cosmetic Products.
Fmt 4703
Sfmt 4703
(G) Methanamine, N,N-Dimethyl-, Reaction
Products With Alkylamine-Epichlorohydrin
Polymer, Chlorides.
(S) D-Glucopyranose, Oligomeric, Decyl Octyl
Glycosides, Polymers With Epichlorohydrin
And Sorbitan Monooleate.
(S)
(3-Chloro-2-Hydroxypropyl)
Dimethyloctadecylammonium Chloride.
(G) Poly(Oxyalkanediyl), Alpha-Hydro-OmegaHydroxy-, Mono(Alkyl And Alkenyl)Ethers,
Phosphates, Alkali Metal Salt.
(G) Poly(Oxyalkanediyl), Alpha-Hydro-OmegaHydroxy-, Mono(Alkyl And Alkenyl)Ethers,
Phosphates.
(G) Substituted Alkanoic Acid, Compounds with
Substituted
Dialkylene-Substituted
Carbomonocycle-Substituted AlkanediamineSubstituted
Heteromonocycle-Polyalkylene
Glycol-Substituted
Dialkanol-Substituted
Carbomonocycle Reaction Products.
(G) Heteropolycycle, Polymer With Substituted
Heteromonocycle, Polyalkylene Glycol And
Substituted Carbomonocycle.
(G) alkyl polymer with alkyl diol diisocyanate
compound with amine salt.
(G) Modified Polymer Of Ethenylbenzene, Buta1,3-Diene, And Substituted Methyl Acrylates.
(G) Sulfurized Ester.
(G) Alkyl Dioic Acid Polymer With Poly(Oxyalkyl)—Hydro—Hydroxy-, And Aromatic
Diisocyanate.
(G) Inorganic Acid, Triphenyl Ester, Polymer.
(G) Zinc Carboxylate Salt.
(G) Soybean Oil, Polymer With Benzoic Acid,
Difunctional Glycols, Glycerol, Phthalic Anhydride,Sorbitol, Terephthalic Acid.
(G) Diester.
(G) Amide Resin.
(G) Alkanedicarboxylic Acid, Polymer With
Alkanediamine,
Alkanediol,
Hydroxy(Hydroxymethyl)-Alkanecarboxylic
Acid
Andmethylenebis[Isocyanatocycloalkane]
Compound with (Dialkylamino)Alkanol.
(G) Alkanedicarboxylic Acid, Polymer With
Alkanediol,
Hydroxy-(Hydroxyalkyl)-Alkane
Carboxylic
Acid
And
Methylenebis[4Isocyanatocycloalkane],
Compound
with
Dialkylamine.
(G) Aromatic Dicarboxylic Acid, Polymers With
Aliphatic Polyols And Substituted Alkenes.
(G) Fluorinated Aromatic Polyamic Acid Polymer.
(G) Chloridite.
(G)
Poly(Oxy-1,2-Ethanediyl),
-[[[3[(Carboxyamino)Methyl]-3,5,5Trimethylcyclohexyl]Amino]Carbonyl]—[[[[3[(Carboxyamino)Methyl]-3,5,5Trimethylcyclohexyl]Amino]Carbonyl]Oxy]-,
Mixed 4-Alkylcyclohexyl And Lauryl Diesters.
(S) Oils, Aquilaria Crassna.
E:\FR\FM\07JYN1.SGM
07JYN1
38299
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
TABLE I—249 PMNS RECEIVED FROM 5/23/13 TO 9/30/13—Continued
Received date
Projected notice end date
Manufacturer/
Importer
Use
Chemical
P–13–0867 ........
08/28/2013
11/26/2013
CBI ........................
(G) Component Of Polymer Film .........
08/29/2013
11/27/2013
CBI ........................
P–13–0869 ........
08/30/2013
11/28/2013
Mane USA ............
P–13–0871 ........
08/30/2013
11/28/2013
CBI ........................
(G) Functions As An Oil-Soluble Corrosion Inhibitor For Use In Oil And
Gas Wells And Pipelines.
(S) Fine Fragrance; Fragrance In A
Cosmetic Product; Fragrance In A
Non-Cosmetic Product.
(G) Rheology Modifier ..........................
(G) Aromatic Dicarboxylic Acid, Polymers With
Aliphatic Polyols And Substituted Alkenes.
(G) Tall Oil Fatty Acid Diethylenetriamine Compounds with Substituted Polyethylene Glycol
Ether.
(S) 2-Cyclohexen-1-Ol, 2,6-Dimethyl-4-(2,2,3Trimethyl-3 Cyclopenten-1-Yl)-.
P–13–0868 ........
P–13–0872
P–13–0874
P–13–0875
P–13–0876
P–13–0877
P–13–0878
........
........
........
........
........
........
08/30/2013
08/30/2013
08/30/2013
08/30/2013
08/30/2013
09/02/2013
11/28/2013
11/28/2013
11/28/2013
11/28/2013
11/28/2013
12/01/2013
Lamberti USA .......
CBI ........................
CBI ........................
CBI ........................
CBI ........................
CBI ........................
P–13–0879 ........
09/02/2013
12/01/2013
CBI ........................
P–13–0880 ........
P–13–0881 ........
09/03/2013
09/03/2013
12/02/2013
12/02/2013
CBI ........................
Firmenich Inc ........
P–13–0882 ........
09/04/2013
12/03/2013
CBI ........................
P–13–0883 ........
09/05/2013
12/04/2013
CBI ........................
P–13–0884 ........
P–13–0885 ........
09/06/2013
09/06/2013
12/05/2013
12/05/2013
CBI ........................
CBI ........................
P–13–0886 ........
09/06/2013
12/05/2013
CBI ........................
P–13–0906 ........
09/09/2013
12/08/2013
CBI ........................
P–13–0907 ........
09/09/2013
12/08/2013
CBI ........................
P–13–0908 ........
09/09/2013
12/08/2013
CBI ........................
P–13–0909 ........
09/09/2013
12/08/2013
CBI ........................
P–13–0910
P–13–0911
P–13–0912
P–13–0913
P–13–0915
........
........
........
........
........
09/09/2013
09/09/2013
09/09/2013
09/09/2013
09/11/2013
12/08/2013
12/08/2013
12/08/2013
12/08/2013
12/10/2013
CBI
CBI
CBI
CBI
CBI
P–13–0916 ........
09/11/2013
12/10/2013
CBI ........................
P–13–0917 ........
P–13–0918 ........
09/11/2013
09/11/2013
12/10/2013
12/10/2013
Lamberti USA .......
Henkel Corporation
P–13–0919 ........
09/11/2013
12/10/2013
CBI ........................
(G) Industrial Feedstock Chemical ......
P–13–0920 ........
09/12/2013
12/11/2013
Biochar Now LLC ..
P–13–0923 ........
09/13/2013
12/12/2013
CBI ........................
P–13–0924 ........
09/17/2013
12/16/2013
P–13–0925 ........
P–13–0927 ........
09/17/2013
09/19/2013
12/16/2013
12/18/2013
Lambent Technologies.
CBI ........................
CBI ........................
(S) Filler For Plastics Or Polymers;
Soil Amendment.
(S) Reactive Polymer For Use In
Paints.
(S) Anti-Wear Additive For Lubricants,
Greases, And Metalworking Fluids.
(S) Raw Material In Powder Coatings
(G) Coloring Component ......................
P–13–0928 ........
09/19/2013
12/18/2013
CBI ........................
(G) Fabrication Of Composite Articles
P–13–0930 ........
09/23/2013
12/22/2013
CBI ........................
P–13–0931 ........
09/23/2013
12/22/2013
Henkel Corporation
P–13–0932 ........
09/23/2013
12/22/2013
CBI ........................
(G) Reactant In Polymerization Reaction.
(S) Polymerizable Component in Adhesive Formulations.
(G) Adhesive For Open Non-Descriptive Use.
mstockstill on DSK4VPTVN1PROD with NOTICES
Case No.
VerDate Mar<15>2010
17:20 Jul 03, 2014
Jkt 232001
PO 00000
........................
........................
........................
........................
........................
Frm 00024
(G) Removal Of Hydrogen Sulfide .......
(G) Chemical Intermediate ...................
(G) Chemical Intermediate ...................
(G) Chemical Intermediate ...................
(G) Chemical Intermediate ...................
(S) Acrylic Resin Used In Ultra violet
Curable Inks And Coatings.
(S) Intermediate Reaction Product
Used As Input To Further Polymer
Reaction.
(G) Binder In Primer ............................
(G) Fragrance Ingredient For The Use
In Consumer Products (Cosmetic
And Household Use).
(G) Destructive Use .............................
(G) Corrosion Inhibitor For Down-Hole
Well Treatment And Pipelines Used
In The Oil And Gas Industry.
(S) Dye Intermediate ............................
(S) Raw Material Used In The Manufacture Of Ultra violet Coatings And
Inks.
(G) Rubber Products ............................
(S) Pretreatment To Be Applied On A
Steel Substrate In Liquid Form,
Dried, And Covered By A Paint
Layer. Aternatively, To Be Applied
On A Galvanized Steel Substrate As
A Shipout Passivate And Not Further Painted.
(G) Additive, Open, Non-Dispersive
Use.
(G) Additive, Open, Non-Dispersive
Use.
(G) Additive, Open, Non-Dispersive
Use.
(G) Surfactant Or Emulsifier ................
(G) Surfactant Or Emulsifier ................
(G) Surfactant Or Emulsifier ................
(G) Surfactant Or Emulsifier ................
(G) Production Aid For Chemical Processing.
(S) Reactive Polymer For Use In Adhesive Applications.
(G) Limit Scale Build Up ......................
(S)
Chemical
Intermediate
To
Cureable Monomer.
Fmt 4703
Sfmt 4703
(G)
Polyalkylene
Glycol,
Polymer
With
Alkylisocyanate And Alkylphenol.
(G) Alkyl Triazine.
(G) Substituted Phenol.
(G) Substituted Phenol.
(G) Substituted Phenol.
(G) Substituted Phenol.
(G) Reaction Product Of Acrylic Acid And
Isocyanate.
(G) Alkylphenol.
(G) Polyurethane Crosslinker.
(S) Patchouli Essential Oil Produced By Fermentation Of A Sugar Source.
(G)
Alkylated
Benzene,
Brominated,(G)
Alkylated Benzene, Dibrominated.
(G) Fatty Acids, Tall Oil, Reaction Products With
Polyamine, 2-Mercaptoacetate.
(G) Substituted Bipyridinium Salt.
(G) Mono Function Acrylate.
(G) Hydrofluoroolefin
Difluoroethene.
(G) Silicate-Silane.
Polymer
With
1,1-
(G) Epoxy Resin, Reaction Products With
Alkanolamines.
(G) Polyether Polyester Urethane Phosphate.
(G) Byk-Lp X 22338 (Substances Notified).
(G) Glycolipid.
(G) Glycolipid.
(G) Glycolipid.
(G) Glycolipid.
(G) Fatty Acids Esters, Reaction Products With
Amines.
(G) Polyurethane.
(G) Alkylphosphonate.
(S) Siloxanes And Silicones, Di-Me, HydrogenTerminated,
Polymers
With
2,4,6,8Tetraethenyl-2,4,6,8Tetramethylcyclotetrasiloxane..
(G) Glycerides, C14–18, C16–18 Unsaturated, From
Fermentation.
(S) Charcoal Or Biochar.
(G) Acrylate Polymer.
(G) Phosphated Mono And Di-Glycerides
(Pmdg).
(G) Vinyl Ether Urethane Resin.
(G)
N-(Dialkylamino)Alkyl-DialkylphenylTetrahydrodioxopyrrolopyrrolyl-Benzamide.
(G) Unsaturated Polyester Resin In Reactive
Solvent.
(G) Substituted Phenol.
(S) 2-Propenoic Acid, 4-Phenoxybutyl Ester.
(G) Polyester Adduct.
E:\FR\FM\07JYN1.SGM
07JYN1
38300
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
TABLE I—249 PMNS RECEIVED FROM 5/23/13 TO 9/30/13—Continued
Received date
Projected notice end date
Manufacturer/
Importer
Use
P–13–0933 ........
09/24/2013
12/23/2013
CBI ........................
09/24/2013
12/23/2013
CBI ........................
P–13–0935 ........
09/24/2013
12/23/2013
CBI ........................
P–13–0936 ........
09/25/2013
12/24/2013
CBI ........................
P–13–0937 ........
09/25/2013
12/24/2013
P–13–0939 ........
09/13/2013
12/12/2013
Pennzoil-Quaker
State Company.
CBI ........................
(G) Contained Use In Energy Production.
(S) Polymer For Soft-Feel Effects
Coatings For Film.
(G) Adhesive For Open Non-Descriptive Use.
(G) Contained Use In Energy Production.
(G) SHELL ONDINA ............................
P–13–0934 ........
P–13–0940 ........
09/13/2013
12/12/2013
P–13–0941 ........
09/13/2013
12/12/2013
Cray Valley USA,
LLC.
Umicore Precious
Metals NJ, LLC.
P–13–0942 ........
P–13–0943 ........
09/27/2013
09/30/2013
12/26/2013
12/29/2013
CBI ........................
Henkel Corporation
(G) Coating Material ............................
(S) Polymerizable Component In Adhesive And Sealant Formulations.
P–13–0944 ........
09/27/2013
12/26/2013
Elantas PDG, Inc ..
(S) Coating For Electrical Equipment ..
P–13–0945
P–13–0946
P–13–0947
P–13–0948
........
........
........
........
09/30/2013
09/30/2013
09/27/2013
09/30/2013
12/29/2013
12/29/2013
12/26/2013
12/29/2013
(G) Industrial Thermoplastic Additive ..
(G) Industrial Thermoplastic Additive ..
(G) Open, Non-Dispersive Use ............
(S) Lubricant Additive ..........................
P–13–0949 ........
P–13–0950 ........
09/30/2013
09/30/2013
12/29/2013
12/29/2013
CBI ........................
CBI ........................
CBI ........................
Lambent Technologies.
CBI ........................
CBI ........................
P–13–0951 ........
09/30/2013
12/29/2013
CBI ........................
(G) A Destructive Use In The Manufacture Of Coating Materials And
Fuels.
Case No.
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
Chemical
(S) A Polymerized Component In
Novel Adhesive/Sealant Formulations.
(G) Additive For Rubber Goods To Improve Properties.
(S) Inhibited Curing Agent ...................
(G) Inks ................................................
(G) Rheology Modifier ..........................
CBI) on the NOCs received by EPA
during this period: The EPA case
number assigned to the NOC, the date
(G) Organic Phosphonate Salt.
(G) Polyether Polyurethane Polymer.
(G) Polyisocyanate Adduct.
(G) Organic Phosphonate Salt.
(S) Distillates (Fischer-Tropsch), Heavy, C18–50Branched, And Linear.
(G) Silyl Modified Polymer.
(S) 1,3-Butadiene, Homopolymer, TriethoxysilylTerminated.
(S) Platinate (2-), Hexachloro-, Hydrogen (1:2),
(Oc-6–11)-, Reaction Product With Carbon
Monoxideand 2, 4, 6, 8-Tetraethenyl-2, 4, 6,
8-Tetramethylcyclotetrasiloxane.
(G) Copolymer Of Alkyl Methacrylate.
(S) Benzene, 1,4-Bis(1-Chloro-1-Methylethyl),Reaction Products With Polyisobutylene,
Bis[3-[(1-Oxo-2-Propen-1-Yl)Oxy]Propyl]Teminated.
(S) 5-Isobenzofurancarboxylic Acid, 1,3-Dihydro1,3-Dioxo-, Polymer With 2-Aminoethanol,
2,2-Dimethyl-1,3-Propanediol, 2,5-Furandione
And
3a,4,7,7a-Tetrahydro-1,3Isobenzofurandione.
(G) Alkoxysilane.
(G) Alkoxysilane.
(G) Hydroxy Functional Polyester.
(G) Amine Phosphate.
(G) Nickel, Bisdiphenylimidazolidinetrithione.
(G)
Polyalkylene
Glycol,
Polymer
With
Alkylisocyanate And Alkylphenol.
(G) Zinc Carboxylate.
the NOC was received by EPA, the
projected end date for EPA’s review of
the NOC, and chemical identity.
TABLE II—63 NOCS RECEIVED FROM 5/23/13 TO 9/30/13
Case No.
Commencement
notice end date
..
..
..
..
08/22/2013
08/15/2013
09/19/2013
08/22/2013
08/15/2013
07/26/2013
06/19/2013
02/22/2012
P–11–0074 ..
09/24/2013
09/05/2013
P–11–0177 ..
mstockstill on DSK4VPTVN1PROD with NOTICES
P–07–0011
P–09–0011
P–09–0356
P–10–0484
Received date
08/05/2013
07/12/2013
P–11–0270
P–11–0560
P–12–0032
P–12–0138
P–12–0149
P–12–0194
P–12–0342
P–12–0408
P–12–0441
P–12–0493
P–12–0532
P–12–0557
P–12–0558
08/28/2013
09/16/2013
09/05/2013
09/24/2013
08/19/2013
09/25/2013
08/02/2013
08/13/2013
08/01/2013
09/06/2013
08/14/2013
08/16/2013
08/16/2013
09/01/2011
12/15/2012
09/04/2013
09/05/2013
07/30/2013
09/17/2013
08/01/2013
08/07/2013
01/08/2013
04/03/2013
07/23/2013
07/29/2013
07/29/2013
..
..
..
..
..
..
..
..
..
..
..
..
..
VerDate Mar<15>2010
15:59 Jul 03, 2014
Jkt 232001
PO 00000
Chemical
(G) Alkylated Phenol.
(G) Unsaturated Urethane Acrylate.
(G) Zirconium Lysine Complex.
(G) Esterified Polymer Of Styrene, Maleic Anhydride And Ethenylbenzene, Potassium
Salt.
(G) Glyceryl Polypropylene Glycol Ether Polymer With Isophorone Diisocyanate, Methacrylate Blocked.
(S) Dodecanedioic Acid, Polymer With 2,2-Dimethyl-1,3-Propanediol, 2-Ethyl-2(Hydroxymethyl)-1,3-Propanediol,
Hydrazine,
3-Hydroxy-2-(Hydroxymethyl)-2Methylpropanoic Acid And 1,1’-Methylenebis[4-Isocyanatocyclohexane], Compound.
With N,N-Diethylethanamine.
(S) Lead Strontium Titanium Zirconium Oxide.
(G) Alkylated Diphenyl Ethers.
(G) Modified Fluorinated Acrylate.
(G) Hydroxy Phenyl Fatty Acids.
(G) Brominated Distillation Bottoms.
(G) Amines, Bis(Alkyl). 3-[Bis(Alkylalkoxy)Phosphinothioyl]Thio]-2-Alkylalkananoates.
(S) 3[Cis-4-(2-Methylpropyl)Cyclohexyl]Propanal*.
(G) Alkenedioic Acid Dialkyl Ester, Reaction Products With Alkenoic Acid Alkyl Esters.
(G) A Glucopyranose.
Null.
(G) Tetrasubstituted Dioxadithiane.
(S) Tires, Wastes, Pyrolyzed, C8–25 Oil Fraction.
(S) Tires, Wastes, Pyrolyzed, C21–33 Oil Fraction.
Frm 00025
Fmt 4703
Sfmt 4703
E:\FR\FM\07JYN1.SGM
07JYN1
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
38301
TABLE II—63 NOCS RECEIVED FROM 5/23/13 TO 9/30/13—Continued
Case No.
Commencement
notice end date
..
..
..
..
..
..
..
..
..
..
09/04/2013
08/23/2013
08/23/2013
08/23/2013
08/22/2013
08/06/2013
09/25/2013
08/12/2013
08/06/2013
08/30/2013
08/30/2013
08/22/2013
08/22/2013
08/22/2013
08/09/2013
07/20/2013
09/18/2013
07/16/2013
07/10/2013
08/21/2013
P–13–0218 ..
08/05/2013
07/28/2013
P–13–0228 ..
08/28/2013
08/14/2013
P–13–0260 ..
P–13–0315 ..
09/20/2013
09/05/2013
08/28/2013
08/24/2013
P–13–0316 ..
P–13–0320 ..
09/23/2013
09/16/2013
09/10/2013
09/05/2013
P–13–0330 ..
09/30/2013
09/23/2013
P–13–0337
P–13–0341
P–13–0358
P–13–0374
P–13–0378
..
..
..
..
..
08/15/2013
08/12/2013
08/05/2013
09/05/2013
09/05/2013
07/31/2013
07/18/2013
07/03/2013
09/03/2013
09/03/2013
P–13–0380 ..
09/12/2013
09/10/2013
P–13–0381 ..
P–13–0387 ..
08/22/2013
08/12/2013
08/19/2013
08/05/2013
P–13–0388 ..
08/05/2013
07/28/2013
P–13–0390 ..
P–13–0392 ..
P–13–0405 ..
09/25/2013
09/16/2013
08/26/2013
09/24/2013
09/11/2013
08/17/2013
P–13–0406
P–13–0407
P–13–0414
P–13–0415
P–13–0421
..
..
..
..
..
08/07/2013
09/03/2013
08/22/2013
08/27/2013
08/27/2013
08/05/2013
08/15/2013
07/31/2013
08/16/2013
08/13/2013
P–13–0447 ..
08/30/2013
08/21/2013
P–13–0448 ..
09/11/2013
09/06/2013
P–13–0458 ..
mstockstill on DSK4VPTVN1PROD with NOTICES
P–13–0010
P–13–0033
P–13–0034
P–13–0055
P–13–0110
P–13–0131
P–13–0140
P–13–0173
P–13–0189
P–13–0214
Received date
09/30/2013
09/20/2013
P–13–0463
P–13–0465
P–13–0466
P–13–0557
P–13–0620
..
..
..
..
..
09/30/2013
09/30/2013
09/30/2013
09/25/2013
09/23/2013
09/11/2013
09/20/2013
09/16/2013
09/09/2013
09/11/2013
P–13–0629 ..
09/12/2013
09/09/2013
P–96–1093 ..
09/26/2013
09/22/2013
VerDate Mar<15>2010
15:59 Jul 03, 2014
Jkt 232001
PO 00000
Chemical
(S) 1,4-Cyclohexanedicarboxylic Acid, 1,4-Dimethyl Ester, Hydrogenolysis Products.
(G) Dialkyl Thiophenol, Manufactor Of, By-Products From.
(G) Alkylthiophenamine, Manufactor Of, By-Products From.
(G) Alkaneamide, Halo-Dialkylthienyl-Alkoxydialkyl-, Manufactor Of, By-Products From.
(G) Hydroxyalkyl Methacrylate, Reaction Product With Cyclic Ether.
(G) Tertiary Ammonium Compound.
Null.
(S) 9-Dodecanoic Acid, Methyl Ester*.
(G) Depolymerized Waste Plastics.
(G) Polymer Reaction Product Of Formaldehyde, Chloromethyl Oxirane, Phenol, 1,3Isobenzofurandione, With N-(2-Aminoethyl)-1,2-Ethanediamine And Phenol With
Tetrahydro-Methano-Indene Glycidyl Ether.
(S)
Bicyclo[2.2.1]Hept-2-Ene,
5-Ethenyl-,
Polymer
With
Ethene,
5Ethylidenebicyclo[2.2.1]Hept-2-Ene And 1-Propene.
(S) Phosphine, Triphenyl-, Reaction Products With Brominated Isobutylene-Isoprene
Polymer.
(G) Zinc Bis(Dialkyldithiocarbamate).
(G) 1,4-Benzenedicarboxylic Acid, Polymer With Substituted-2,5-Furandione, Carboxylic Acid, Substituted Carbomonocycle Ethoxylated, Substituted Carbomonocycle
Propoxylated And Polyol.
(G) Copolymer Of Methacryclic Acid Derivatives.
(G) Substituted Dicarboxylic Acid, Polymer With Substituted Benzenamine And Substituted Dicarboxylic Acid.
(G) Fatty Acids, C18, Dimers, Dialkyl Esters, Hydrogenated, Polymers With Alkanedioic
Acid,
1,3-Bis-(Isocyanato-1-Alkyl)Benzene,
3-Hydroxy-2-(Hydroxymethyl)-2Alkylpropenoic Acid, 1,1’-Methylenebis [Isocyanatocycloalkane], Neopentyl Glycol
And Oxepanone Compounds With Trialkyl Amine.
(G) Fatty Acid Phthalate Alkyd Polymer.
(S) 9-Dodecenoic Acid, Methyl Ester.
(G) Vegetable Oil Esters.
(G) Substituted Picolinic Acid.
(G) Carboxylic Anhydride, Polymer With -Hydro-Hydroxypoly(Oxy-1,2-Diethanediyl),
Compound. With 2,3,4,6,7,8,9,10-Octahydropyrimido-[1,2–A]Azepine.
(S) 2-Propenoic Acid, 2-Methyl-, 1,1-Dimethylethyl Ester, Polymer With Butyl 2Propenoate, Ethenylbenzene And 2-Oxiranylmethyl 2-Methyl-2-Propenoate, 2Propenoate.
(G) Pyrrolopyrrol.
(G) Amines, Polyethylenepoly-, Reaction Products With Aryl Anhydride And Succinic
Monopolyisobutylene Derivs.
(G) Hexanedioic Acid, Polymer With 1,2-Butanediol, Diesters With Alkene Reaction
Products.
(G) Halogenated, Substituted Picolinic Ester.
(G) Acrylic Acid Esters Polymer With Polyisocyanate.
(S) Carbonic Acid, Dimethyl Ester, Polymer With 1,4-Diisocyanatobenzene, 1,6Hexanediol And 2,2’-[1,4-Phenylenebis(Oxy)]Bis]Ethanol].
(S) 2h-2,4a-Methanonaphthalen-1(5h)-One, Hexahydro-5,5-Dimethyl-2-Propyl-.
(G) Triazinylaminostilbene.
(S) 1,4-Benzenedicarboxylic Acid, Polymer With [1,1’-Biphenyl]-3,3’,4,4’-Tetramine*.
(S) Pyridine, 2,2’-Dithiobis.
(S) 4,7-Methano-1h-Indene-5-Acetaldehyde, Octahyro-*,(S) 4,7-Methano-1h-Indene-5Carboxaldehyde, Octahydro-6-Methyl-.
(G) Carboxylic Anhydride, Polymer With -Hydro-Hydroxypoly(Oxy-1,2-Ethanediyl),
Compound. With N,N’-Bis[3-(Dimethylamino)Propyl]Urea.
(G) Propoxylated Glycerol Aliphatic Diacid Acrylated Polymer, Polymer With Aliphatic
Diamine.
(G) Substituted Carbopolycycle, Polymer With Substituted Carbomonocycle, Alkanoic
Acid Ester and Tetrasubstituted Alkane-Blocked.
(G) Substituted Polysiloxane.
(G) Substituted Benzotriazole.
(G) Substituted Polysiloxane.
(G) Tall Oil Fatty Acid, Compound With Cyclic Amine.
(G) Polymer Of Aliphatic Acids, Aliphatic Diols, Aliphatic Polyols, Oligomeric
Silsesquioxane, And Aromatic Acids.
(S) 2-Propenoic Acid, 2-Methyl-,Methyl Ester, Polymer With Butyl 2-Propenoate,
Ethenylbenzene And 2-Oxiranylmethyl 2-Methyl-2-Propenoate, 2-Propenoate, 1,1Dimethylpropyl 2-Ethylhexaneperoxoate-Initiated.
(G) Polyetherisocyanate Silane Adduct.
Frm 00026
Fmt 4703
Sfmt 4703
E:\FR\FM\07JYN1.SGM
07JYN1
38302
Federal Register / Vol. 79, No. 129 / Monday, July 7, 2014 / Notices
If you are interested in information
that is not included in these tables, you
may contact EPA as described in Unit
III. to access additional non-CBI
information that may be available.
List of Subjects
Environmental protection, Chemicals,
Hazardous substances, Imports, Notice
of commencement, Premanufacturer,
Reporting and recordkeeping
requirements, Test marketing
exemptions.
Dated: June 24, 2014.
Chandler Sirmons,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2014–15760 Filed 7–3–14; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2014–0462; FRL–9912–06]
Certain New Chemicals; Receipt and
Status Information
SUPPLEMENTARY INFORMATION:
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
mstockstill on DSK4VPTVN1PROD with NOTICES
I. General Information
A. Does this action apply to me?
EPA is required under the
Toxic Substances Control Act (TSCA) to
publish in the Federal Register a notice
of receipt of a premanufacture notice
(PMN); an application for a test
marketing exemption (TME), both
pending and/or expired; and a periodic
status report on any new chemicals
under EPA review and the receipt of
notices of commencement (NOC) to
manufacture those chemicals. This
document covers the period from
October 1, 2013 to January 30, 2014.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before August 6,
2014.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2014–0462,
and the specific PMN number or TME
number for the chemical related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
SUMMARY:
VerDate Mar<15>2010
15:59 Jul 03, 2014
Jkt 232001
Protection Agency, 1200 Pennsylvania
Ave. NW., Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at
https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact:
Bernice Mudd, Information
Management Division (7407M), Office of
Pollution Prevention and Toxics,
Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington,
DC 20460–0001; telephone number:
(202) 564–8951; email address:
Mudd.bernice@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCAHotline@epa.gov.
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the PMNs addressed in this action.
B. What should I consider as I prepare
my comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket ID
number and other identifying
PO 00000
Frm 00027
Fmt 4703
Sfmt 4703
information (subject heading, Federal
Register date and page number).
ii. Follow directions. The Agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at
your estimate in sufficient detail to
allow for it to be reproduced.
vi. Provide specific examples to
illustrate your concerns and suggest
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
II. What action is the Agency taking?
This document provides receipt and
status reports, which cover the period
from October 1, 2013 to January 30,
2014, and consists of the PMNs pending
and/or expired, and the NOCs to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
III. What is the Agency’s authority for
taking this action?
Section 5 of TSCA requires that EPA
periodically publish in the Federal
Register receipt and status reports,
which cover the following EPA
activities required by provisions of
TSCA section 5.
EPA classifies a chemical substance as
either an ‘‘existing’’ chemical or a
‘‘new’’ chemical. Any chemical
substance that is not on EPA’s TSCA
Inventory is classified as a ‘‘new
chemical,’’ while those that are on the
TSCA Inventory are classified as an
‘‘existing chemical.’’ For more
information about the TSCA Inventory
go to: https://www.epa.gov/opptintr/
newchems/pubs/inventory.htm. Anyone
who plans to manufacture or import a
new chemical substance for a nonexempt commercial purpose is required
by TSCA section 5 to provide EPA with
a PMN, before initiating the activity.
Section 5(h)(1) of TSCA authorizes EPA
to allow persons, upon application, to
manufacture (includes import) or
process a new chemical substance, or a
chemical substance subject to a
significant new use rule (SNUR) issued
under TSCA section 5(a), for ‘‘test
marketing’’ purposes, which is referred
E:\FR\FM\07JYN1.SGM
07JYN1
Agencies
[Federal Register Volume 79, Number 129 (Monday, July 7, 2014)]
[Notices]
[Pages 38288-38302]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-15760]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2014-0381; FRL-9911-22]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of notices
of commencement (NOC) to manufacture those chemicals. This document
covers the period from May 23, 2013 to September 30, 2013.
[[Page 38289]]
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before August 6, 2014.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2014-0381, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact:
Bernice Mudd, Information Management Division (7407M), Office of
Pollution Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number:
(202) 564-8951; email address: mudd.bernice@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the PMNs addressed in this action.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. What action is the Agency taking?
This document provides receipt and status reports, which cover the
period from May 23, 2013 to September 30, 2013, and consists of the
PMNs and TMEs both pending and/or expired, and the NOCs to manufacture
a new chemical that the Agency has received under TSCA section 5 during
this time period.
III. What is the Agency's authority for taking this action?
Section 5 of TSCA requires that EPA periodical publish in the
Federal Register receipt and status reports, which cover the following
EPA activities required by provisions of TSCA section 5.
EPA classifies a chemical substance as either an ``existing''
chemical or a ``new'' chemical. Any chemical substance that is not on
EPA's TSCA Inventory is classified as a ``new chemical,'' while those
that are on the TSCA Inventory are classified as an ``existing
chemical.'' For more information about the TSCA Inventory go to: https://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to
manufacture or import a new chemical substance for a non-exempt
commercial purpose is required by TSCA section 5 to provide EPA with a
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes
EPA to allow persons, upon application, to manufacture (includes
import) or process a new chemical substance, or a chemical substance
subject to a significant new use rule (SNUR) issued under TSCA section
5(a), for ``test marketing'' purposes, which is referred to as a test
marketing exemption, or TME. For more information about the
requirements applicable to a new chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic status
reports on the new chemicals under review and the receipt of NOCs to
manufacture those chemicals.
IV. Receipt and Status Reports
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: The EPA case number assigned to the
PMN, the date the PMN was received by EPA, the projected end date for
EPA's review of the PMN, the submitting manufacturer/importer, the
potential uses identified by the manufacturer/importer in the PMN, and
the chemical identity.
[[Page 38290]]
Table I--249 PMNs Received From 5/23/13 to 9/30/13
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected
Case No. Received date notice end Manufacturer/ Importer Use Chemical
date
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-13-0467.......................... 05/22/2013 08/20/2013 CBI................... (G) Curing Agent For (G) Substituted Polysiloxane.
Thermoset Resins.
P-13-0468.......................... 05/23/2013 08/21/2013 Henkel Corporation.... (S) Site Limited Chemical (S) Oxirane,[(1-
Intermediate To Cureable Propenyloxy)Methyl]-(9ci).
Monomer.
P-13-0494.......................... 05/30/2013 08/28/2013 CBI................... (G) Cleaning Fluid........ (S) 1,3-Dioxolane-4-Methanol, 2-
methyl-2-(2-Methylpropyl)-.
P-13-0495.......................... 05/30/2013 08/28/2013 Wacker Chemicals (G) The Substance Is A (G) Metal Hydroxide, Treated
Corporation. Filler Used In Fire With Alkenyl Alkoxy Silane.
Resistant Silicone Rubber
Blends.
P-13-0496.......................... 05/31/2013 08/29/2013 CBI................... (G) Additive For Paper.... (G) Amophoteric Polyacrylamine.
P-13-0497.......................... 05/31/2013 08/29/2013 Henkel Corporation.... (S) A Polymerizable (S) 2-Propenoic Acid, Butyl
Component Of Adhesive And Ester, Homopolymer, [(1-Oxo-2-
Sealant Formulations. Propen-1-Yl)Oxy]-Terminated.
P-13-0498.......................... 06/05/2013 09/03/2013 Henkel Corporation.... (S) Hot melt Adhesives (S) Hexanedioic Acid, Polymer
Used In Panel Lamination With 1,4-Butanediol, 1,6-
And Other Assemblies. Hexanediol, Alpha-Hydro-Omega-
Hydroxypoly[Oxy(Methyl-1,2-
Ethanediyl)], 1,1'-
Methylenebis[4-
Isocyanatobenze] And 2-
Oxepanone, 3-9
trimethoxysilyl)-1-
Propanethiol-Blocked.
P-13-0514.......................... 06/04/2013 09/02/2013 Alberdingk Boley Inc.. (S) Coatings For Wood And (G) Alkyl Carboxylic Acid,
Plastic. Hydroxy-(Hydroxyalkyl) Polymer
With
Methylenebis[Isocyanatocycloal
kane], Ditetrahydroxyalkane,
Pentaacrylate-Blocked,
Compounds With
Alkylmorpholine.
P-13-0515.......................... 06/04/2013 09/02/2013 Alberdingk Boley Inc.. (S) Coatings For Wood And (G) Alkyl Carboxylic Acid,
Plastic. Hydroxy-(Hydroxyalkyl),
Polymer With
Diisocyanatoalkane,
Alkyldiamine And
Methylenebis[Isocyanatocycloal
kane], Tetrahydroxyalkane
Triacrylate-Blocked, Compounds
With Trialkylamine.
P-13-0516.......................... 06/04/2013 09/02/2013 Alberdingk Boley Inc.. (S) Coatings For Wood And (G) Alkanedioic Acid, Polymer
Plastic. With (Haloalkyl)Oxirane,
(Hydroxyalkyl)-Alkyldiol,
(Alkylethylidene)Bis[Hydroxybe
nzene] And Oxirane-Alkenoate
Polymer With Hydroxy-
(Hydroxyalkyl)-Alkanoic Acid
And Isocyanato-
(Isocyanatoalkyl)-Cycloalkane,
Compound With N,N-
Dialkylalkylamine.
P-13-0517.......................... 06/04/2013 09/02/2013 CBI................... (G) Processing Aid For (S) 6-Phytase.
Fuel Ethanol Production.
P-13-0518.......................... 06/04/2013 09/02/2013 Alberdingk Boley Inc.. (S) Polymer For Plastic (G) Alkanedioic Acid, Polymer
Coatings. With Diisocyanatoakane,
Dimethyl-Alkyldiol, Hydroxy
(Hydroxyalkyl)-Alkane
Carboxylic Acid,
Methylenebis[Isocyanatoalkane]
And Lactone Compound. With
Diethy Alkylamine.
P-13-0519.......................... 06/04/2013 09/02/2013 Alberdingk Boley Inc.. (S) Polymer For Plastic (G) Unsatuated Fatty Acids,
Coatings. Dimers, Di-Me Esters,
Hydrogenated, Polymers With
Alkyl Dioic Acid,
Diisocyanatocycloalkane,
Hydroxy (Hydroxymethyl)
Alkylcarboxylic Acid,
Methylenebis[Isocyanatocycloal
kane], Alkyl Glycol And
Lactone Compound. With
Trialkylamine.
P-13-0520.......................... 06/04/2013 09/02/2013 Alberdingk Boley Inc.. (S) Coatings For Wood, (G) Aromatic Dicarboxylic Acid,
Metal And Plastic. Polymer With
Cycloalkanemethanol,
Alkanediamine, Alkanedioic
Acid, Hydroxy-2-(Hydroxyalkyl)-
2-Alkylcarboxylic Acid,
Methylenebis[Isocyanatocycloal
kane] And
(Methylethylidene)Bis)Phenylen
eoxy)]Bis[Alkanol], Compound
With Dialkylamino Ethanol.
P-13-0521.......................... 06/04/2013 09/02/2013 Alberdingk Boley Inc.. (S) Coatings For Wood, (G) Aromatic Dicarboxylic Acid,
Metal And Plastic. Polymer With Alkanediamine,
Alkane Dioic Acid, Alkanediol,
Hydroxy-2-(Hydroxymethyl)-2-
Alkyl Carboxylic Acid,
Methylenebis
[Isocyanatocycloalkane] And
[(Alkylethylidene)
Bis(Phenyleneoxy)]Bis[Alkanol]
, Compound With
Dialkylethanamine.
P-13-0522.......................... 06/04/2013 09/02/2013 Alberdingk Boley Inc.. (S) Coatings For Wood And (G) Alkanedioic Acid, Polymer
Plastic. With Aminoalkanol, Alkanediol,
Alkyl-
(Hydroxyalkyl)Alkanediol, 1,X-
Alkanediol, Hydroxy-
(Hydroxyalkyl)Alkanoic Acid,
Methylenebis[Isocyanatocycloal
kane] And Alkene Carboxylic
Acid, Compound. With
Alkylmorpholine.
P-13-0554.......................... 06/05/2013 09/03/2013 3M Company............ (G) Protective Treatment.. (G) Fluorochemical Urethane.
P-13-0555.......................... 06/05/2013 09/03/2013 DIC International (G) Artificial Textile (G) Polycarbonate Type
(USA) LLC. Production. Polyurethane Resin.
P-13-0556.......................... 06/07/2013 09/05/2013 CBI................... (G) Ingredient In (G) Cycloalkene, Acetic Acid
Fragrances For Dispersive Alkylester.
Use.
P-13-0557.......................... 06/06/2013 09/04/2013 CBI................... (S) Epoxy Curing Agent.... (G) Tall Oil Fatty Acid,
Compound With Cyclic Amine.
[[Page 38291]]
P-13-0558.......................... 06/07/2013 09/05/2013 CBI................... (G) Humidity Barrier...... (G) Alkylene Imine Homopolymer,
Alkyl Derivatives.
P-13-0559.......................... 06/10/2013 09/08/2013 Reichhold Inc......... (S) Wood Sealer; Concrete (G) Amine Salt Of Vegetable
Sealer. Oil, Polymer With
Cycloaliphatic Glycol, Hydroxy
Substituted Carboxylic Acid,
Aliphatic Diisocyanate And
Tetra Hydroxy Alkane.
P-13-0560.......................... 06/10/2013 09/08/2013 Eastman Chemicals Co.. (G) Solvent............... (G) Aliphatic Ester Of A
Modified Carboxylic Acid.
P-13-0563.......................... 06/10/2013 09/08/2013 The Dow Chemical (G) Chemical Intermediate (G) Polyalkylene Glycol, Alpha
Company. For Polyurethane Polymer. Isocyanate, Omega Silane.
P-13-0564.......................... 06/10/2013 09/08/2013 Henkel Corporation.... (S) Site Limited (S) Benzene, 1,4-Bis(1-Chloro-1-
Intermediate To Methylethyl)-, Reaction
Functionalized Polymers. Products With Polyisobutylene,
Diallyl Terminated.
P-13-0566.......................... 05/30/2013 08/28/2013 CBI................... (S) Additive.............. (S) Urea, N,N ''-1,6-
Hexanediylbis[N'-[(1s)-1-
Phenylethyl]-.
P-13-0567.......................... 05/30/2013 08/28/2013 CBI................... (G) Additive.............. (G) Ester Wax.
P-13-0568.......................... 06/07/2013 09/05/2013 CBI................... (G) Down Well Additive.... (G) Benzenesulfonic Acid,
Dimethyl-, Alkyl Derivatives,
Sodium Salt.
P-13-0569.......................... 05/31/2013 08/29/2013 International Flavors (S) Fragrance Ingredient (S) 5h-
& Fragrances Inc. For Use In Fragrances For Cyclopenta[H]Quinazoline,
Soaps, Detergents, 6,6a,7,8,9,9a-Hexahydro-
Cleaners And Other 7,7,8,9,9-Pentamethyl-.
Household Products.
P-13-0570.......................... 05/31/2013 08/29/2013 Gharda Chemicals (G) Manufacture Of (G) Poly(Oxy-1,4-
Limited. Mechanical Parts, Phenylenecarbonyl-1,4-
Insulation, Valves, Heat Phenylenecarbonyl-1,4-
Exchange Parts, Oil Phenylene.
Drilling, Aircraft Parts.
P-13-0571.......................... 05/31/2013 08/29/2013 Gharda Chemicals Manufacture Of Mechanical (G) Poly(Oxy-1,4-
Limited. Parts, Insulation, Phenylenecarbonyl-1,4-
Valves, Heat Exchange Phenylenecarbonyl-1,4-
Parts, Oil Drilling, Phenylene.
Aircraft Parts.
P-13-0572.......................... 05/31/2013 08/29/2013 Gharda Chemicals (G) Manufacture Of (G) Poly (2,5-Benzimidazole),
Limited. Mechanical Parts, Polybenzimidazole.
Insulation, Valves, Heat
Exchange Parts, Oil
Drilling, Aircraft Parts.
P-13-0573.......................... 06/12/2013 09/10/2013 Technolgies Zyvex..... (G) Coating Attached To (G) Polymer Of Terepthalic Acid
Carbon Nanotubes. And Ethyl Benzene With
Mutiwalled Carbon Nanotube.
P-13-0574.......................... 05/31/2013 08/29/2013 Canon USA Inc......... (G) Component For Toner (G) Diester.
Use.
P-13-0575.......................... 06/13/2013 09/11/2013 CBI................... (S) Flame Retardant (G) Phosphonic Acid.
Additive For Use In
Plastics.
P-13-0594.......................... 06/14/2013 09/12/2013 CBI................... (G) Surfactant............ (G) Alkyl Oxirane, Polymer With
Alkyl Oxirane Sulfate
Alkylethers, Alkali Salts.
P-13-0595.......................... 06/14/2013 09/12/2013 CBI................... (G) Surfactant............ (G) Alkyl Oxirane, Polymer With
Alkyl Oxirane Sulfate
Alkylethers, Alkali Salts.
P-13-0615.......................... 06/02/2013 08/31/2013 CBI................... (G) Renewable Chemical (G) Alkyl Alkanoate.
Intermediate.
P-13-0616.......................... 05/30/2013 08/28/2013 CBI................... (G) Cleaning Fluid........ (S) 1,3-Dioxolane-4-Methanol, 2-
methyl-2-(2-Methylpropyl)-.
P-13-0617.......................... 06/06/2013 09/04/2013 CBI................... (G) Adhesive.............. (G) Aromatic dicarboxylic Acid
Polymer With Alkanediol, Alkyl
Alkyl-2-Alkenoate, 1,4-Dialkyl
Aromatic dicarboxylate,
Alkanedioc Acid, Alkanedioc
Acid. Alkanediol, Alpha-Hydro-
Omega-Hydroxypoly[Oxy(Alkyll-
Alkanediyl)], Hydroxyalkyl 2-
Alkyl-2-Alkenoate, Aromatic
Diisocyanate, Alkyl 2-Alkyl-2-
Alkenoate And 2-Alkyl-2-
Alkenoic Acid.
P-13-0618.......................... 06/06/2013 09/04/2013 CBI................... (G) Adhesive.............. (G) Alkanedioic Acid, Polymer
With Alkyl 2-Alkyl-2-
Alkenoate, Alkanedioic Acid,
Alkanediol, Alpha-Hydro-Omega-
Hydroxypoly[Oxy(Alkyl-1 2-
Alkanediyl)], Hydroxyalkyl 2-
Alkyl-2-Alkenoate, Aromatic
Diisocyanate, Alkyl 2-Alkyl-2-
Alkenoate And 2-Alkyl-2-
Alkenoic Acid.
P-13-0619.......................... 06/06/2013 09/04/2013 CBI................... (G) Adhesive.............. (G) Alkanedioic Acid, Polymer
With Alkyl Alkyl-Alkenoate,
Alkanedioic Acid, Alkanediol,
Alpha-Hydro-Omega-
Hydroxypoly[Oxy(Alkyl-1,2-
Alkanediyl)], Aromatic
Diisocyanate, Alkyl Alkyl-
Alkeneoate And Alkyl-Alkenoic
Acid.
P-13-0620.......................... 06/13/2013 09/11/2013 CBI................... (G) Industrial Liquid (G) Polymer Of Aliphatic Acids,
Coatings. Aliphatic Diols, Aliphatic
Polyols, Oligomeric
Silsesquioxane, And Aromatic
Acids.
P-13-0621.......................... 06/13/2013 09/11/2013 CBI................... (G) Component Of Foam..... (G) Fatty Acid Polymer With
Aliphatic Alcohol And Aromatic
Diacid.
P-13-0622.......................... 06/17/2013 09/15/2013 Gelest................ (S) Polymerized Into A (S) 1-Propanamine, 3-
Rubber Formulation; (Diethoxymethylsilyl)-N,N-
Research. Dimethyl-.
P-13-0624.......................... 06/17/2013 09/15/2013 Halliburton Energy (S) Filter Cake Breaker (S) Ethanol, 2,2'-Oxybis-,1,1'-
Services Inc. For Oil/Gas Wells. Diformate.
P-13-0625.......................... 06/07/2013 09/05/2013 CBI................... (G) Reaction Modifier For (G) Metal Amine Salt.
Molding Compounds.
P-13-0626.......................... 06/19/2013 09/17/2013 CBI................... (G) Dispersing Agent...... (G) Alkenylic Acid, Alkyl
Ester, Polymer With
Alkylaminoalkyl Alkenamide And
Alkenyl Benzene, Ester With
Alkyl Ethylene Glycol,
Compound. With Chloro-
Chloroalkyl Benzene.
[[Page 38292]]
P-13-0628.......................... 06/19/2013 09/17/2013 CBI................... (G) Pigment Dispersant.... (G) Caprolactam, Polymer With
Caprolactone,
Hydrogenphosphate,
Phenylalkyl, Ester With Alkyl
Polyethylene Glycol.
P-13-0629.......................... 05/30/2013 08/28/2013 Estron Chemical....... (G) Industrial non-VOC (S) 2-Propenoic Acid, 2-Methyl-
Ultra Violet (UV) cure ,Methyl Ester, Polymer With
Coatings. Butyl 2-Propenoate,
Ethenylbenzene And 2-
Oxiranylmethyl 2-Methyl-2-
Propenoate, 2-Propenoate, 1,1-
Dimethylpropyl 2-
Ethylhexaneperoxoate-
Initiated*.
P-13-0630.......................... 06/20/2013 09/18/2013 CBI................... (S) A Polymerizable (G) Silyl Modified Polymer.
Component In Novel
Adhesive/Sealant
Formulations.
P-13-0633.......................... 06/24/2013 09/22/2013 CBI................... (G) Polyurethane Resin For (G) Siloxanes And Silicones, Di-
Coating Agent. Alkyl, 3-(2-Substituted) Alkyl
Group-Terminated, Polymers
With 1,4-Alkanediol, Alkyl
Diisocyanate, Di-Alkyl
Carbonate, 2-Substituted
Heteromonocycle, 1,6-
Alkanediol, Hydrazine, 3-
Substituted-2-(Substituted)-2-
Alkylpropanoic Acid And
Trialkyl Carbomonocycle
Diisocyanate, Compounds. With
Trialkylamine.
P-13-0646.......................... 06/24/2013 09/22/2013 CBI................... (G) Tile Treatment........ (G) Fluoroalkyl Acrylate
Copolymer.
P-13-0647.......................... 06/24/2013 09/22/2013 CBI................... (G) Textile Treatment..... (G) Fluoroalkyl Acrylate
Copolymer.
P-13-0648.......................... 06/24/2013 09/22/2013 CBI................... (G) Tile Treatment........ (G) Fluoroalkyl Acrylate
Copolymer.
P-13-0649.......................... 06/24/2013 09/22/2013 CBI................... (G) Textile Treatment..... (G) Fluoroalkyl Acrylate
Copolymer.
P-13-0650.......................... 06/24/2013 09/22/2013 CBI................... (G) Open, Non-Dispersive.. (G) Epoxy-Amine Adduct,
Neutralized.
P-13-0651.......................... 06/25/2013 09/23/2013 CBI................... (S) Water Borne Industrial (G) Hexamethylenediisocyanate
Coatings Like Metal Homopolymer, Alkoxy-
Coatings; (S) Coatings Terminated.
For Wood.
P-13-0652.......................... 06/25/2013 09/23/2013 Coatex Inc............ (G) Reactant Which Is Part (G) Cyclohexanol, 4-(C10 14-
Of A Polymer, Used As A Branched Alkyl) Derivs.
Coating Additive
(Destructive Use).
P-13-0653.......................... 06/25/2013 09/23/2013 CBI................... (G) Component In Foam (G) Fatty Acid Polymer With
Insulation. Aliphatic Alcohol And Aromatic
Diacid.
P-13-0654.......................... 06/26/2013 09/24/2013 Hampford Research Inc. (G) UV Curable Coating.... (G) Polyether Urethane Acrylate
Oligomer.
P-13-0655.......................... 06/27/2013 09/25/2013 Henkel Corporation.... (S) Adhesives Used For (G) Acrylic Modified Polyether-
Panel Bonding And Other Polyester Prepolymer.
Adhesive Assembly
applications.
P-13-0656.......................... 06/27/2013 09/25/2013 CBI................... (G) Process Aid For (G) Phosphoric Acid, Mixed
Composite Manufacturing.. Alkyl Alcohol Esters,
Trialkanol Ammonium Salts.
P-13-0657.......................... 06/26/2013 09/24/2013 Firmenich Inc......... (S) Aroma For Use In (S) 2,6-Octandienal, 3,6,7-
Fragrance Mixtures, Which Trimethyl-.
In Turn Are Used In
Perfumes.
P-13-0658.......................... 06/28/2013 09/26/2013 CBI................... (G) Metallic Phosphate For (G) Lithium Metal Phosphate.
Battery Electrodes.
P-13-0659.......................... 06/28/2013 09/26/2013 Huntsman Corporation.. (S) Foam Stabilizer For (S) Amides, Coco, N-
Detergents In Household (Hydroxyethyl)-N-Methyl.
And Industrial Multi-
Surface Cleaners; (S)
Foam Stabilizer For
Personal Care Products.
P-13-0667.......................... 06/28/2013 09/26/2013 Henkel Corporation.... (S) A Polymerizable (S) 2-Propenoic Acid, Butyl
Component Of Adhesive And Ester, Polymer With Ethyl 2-
Sealnt Formulations. Propenoate And 2-
Methoxyethylpropenoate,
Reaction Products With Acrylic
Acid.
P-13-0668.......................... 06/28/2013 09/26/2013 CBI................... (G) Additive, Open, Non- (S) Siloxanes And Silicones, Di-
Dispersive. Me, Stearyl Group-Terminated.
P-13-0670.......................... 07/01/2013 09/29/2013 CBI................... (G) Antioxidant........... (G) Alkyl-[4-(Carbomonocycle-
substituted)Carbomonocycle]-
(Dialkyl-
Hydroxycarbomonocycle)Alkane
Derivative.
P-13-0671.......................... 07/01/2013 09/29/2013 CBI................... (G) Antioxidant; (G) (G) Alkyl-[4-(Carbomonocycle-
Additive For Rubber Goods substituted)Carbomonocycle]-
To Improve Properties. (Dialkyl-
Hydroxycarbomonocycle)Alkane
Derivative.
P-13-0672.......................... 07/01/2013 09/29/2013 Shin Etsu Silicones Of (S) Law Material Of Amino- (S) Siloxanes And Silicones, 3-
America. Modefied Silicone. [(2-Aminoethyl)Amino]Propyl
Methyl, Hydroxy-Terminated.
P-13-0673.......................... 07/01/2013 09/29/2013 CBI................... (S) Electrolyte For Energy (S) Pyrrolidinium, 1-Butyl-1-
Applications. Methyl-, Tetrakis(Cyano-
Kc)Borate(1-) (1:1).
P-13-0674.......................... 07/02/2013 09/30/2013 CBI................... (G) Open, Non-Dispersive.. (G) Polycarbamoylsulfonate.
P-13-0676.......................... 07/03/2013 10/01/2013 CBI................... (G) Polyurethane Resin For (G) 1,3-Dioxolan-2-One, Polymer
Coating Agent. With 5-Substituted-1,3,3-
Trialkylmonocarbocyclemethanam
ine, 1,4-Alkanediol, 1,2-
Alkanediol, 1,1'-Alkylenebis[4-
Substituted monocarbocycle]
And 2-Alkyl-1,3-Alkanediol.
P-13-0677.......................... 07/03/2013 10/01/2013 CBI................... (G) Polyurethane Resin For (G) 1,3-Dioxolan-2-One, Polymer
Coating Agent. With 1,4-Alkanediol, 1,2-
Alkanediol, 1,1'-Alkylenebis[4-
Substituted monocarbocycle]
And 2-Alkyl-1,3-Alkanediol.
P-13-0678.......................... 07/02/2013 09/30/2013 CBI................... (G) Water And Oil (G) Fluoroalkyl Methacrylate
Repellent For Plastic And Copolymer.
Inorganic Substrates.
P-13-0679.......................... 07/02/2013 09/30/2013 CBI................... (G) Paper Treatment....... (G) Fluoroalkyl Acrylate
Copolymer.
[[Page 38293]]
P-13-0680.......................... 07/03/2013 10/01/2013 CBI................... (G) Renewable Chemical (G) Alkyl Alkenoate.
Intermediate.
P-13-0681.......................... 07/03/2013 10/01/2013 CBI................... (G) For Use In External (G) Phosphate Ester.
Can Coatings.
P-13-0687.......................... 07/08/2013 10/06/2013 Compass Chemical (G) Oil And Gas (G) Aminophosphonate Salt.
International LLC. Production; Industrial
Water Treatment.
P-13-0688.......................... 07/10/2013 10/08/2013 Henkel Corporation.... (S) Isolated Intermediate (S) Benzene, 1,4-Bis(1-Chloro-1-
To Function Methylethyl) -, Reaction
Polyisobutylene Polymers. Products With Polyisobutylene,
Bis(3-Hydroxypropyl)-
Terminated.
P-13-0689.......................... 07/10/2013 10/08/2013 CBI................... (G) Material For Fiber, (G) Alkanedioic Acid, Polymer
Monofilament, Sheet, With Butanedioic Acid,
Film; Molding Material Alkanediol And 2-Substituted
For Agriculture, Food Alkanedioic Acid.
Package, Const.
P-13-0690.......................... 07/11/2013 10/09/2013 JJI Technologies, LLC. (S) Flame Retardant For (G) Aluminum Phosphate.
Industrial Plastics.
P-13-0706.......................... 07/11/2013 10/09/2013 Nano-C, Inc........... (S) Additive For Fibers In (G) Single-Walled Carbon
Fabrics; (S) Additive For Nanotubes.
Fibers In Structural And
Electrical uses; Additive
For Transparency And
Conductivity Additive In
Lubricants And Grease;
Additive To Improve The
Strength And Durability
Of Materials; Catalyst
Support In Fuel Cells;
Coating Additive To
Improve Corrosion
Resistance Use As A
Nanoporous Network; (S)
Use As A Semi-Conductor,
Conductive, Or Resistive
Element; Use As An
Electromechanical Switch,
Use In Film Laminates To
Improve Conductivity, Use
In Film Laminates To
Improve Structural,
Electrical, Or
Electrochemical
Properties; (S) Use With
Materials To Improve
Mechanical Properties Or
Electrical
Conductivities(S)
Additive For Fibers In
Fabrics; (S) Additive For
Fibers In Structural And
Electrical uses; (S)
Additive For Transparency
And Conductivity; (S)
Additive In Lubricants
And Grease; (S) Additive
To Improve material
Strength; (S) Catalyst
Support In Fuel Cells;
(S) Coating Additive for
Improve Corrosion
Resistance; (S) Use As A
Nanoporous Network; (S)
Use As A Semi-Conductor,
Conductive, Or Resistive;
(S) Use As An
Electromechanical Switch;
(S) Use In Film Laminates
To Improve Structural,
Electrical, Or
Electrochemical
Properties Of Composite;
(S) Use In Separation Of
Chemicals; (S) Use With
Materials for Mechanical
Properties.
P-13-0707.......................... 07/11/2013 10/09/2013 Nano-C, Inc........... (S) Additive For Fibers In (G) Single-Walled Carbon
Fabrics; (S) Additive For Nanotubes.
Fibers In Structural And
Electrical uses; (S)
Additive For Transparency
And Conductivity; (S)
Additive In Lubricants
And Grease; (S) Additive
To Improve material
Strength; (S) Catalyst
Support In Fuel Cells;
(S) Coating Additive for
Improve Corrosion
Resistance; (S) Use As A
Nanoporous Network; (S)
Use As A Semi-Conductor,
Conductive, Or Resistive;
(S) Use As An
Electromechanical Switch;
(S) Use In Film Laminates
To Improve Structural,
Electrical, Or
Electrochemical
Properties Of Composite;
(S) Use In Separation Of
Chemicals; (S) Use With
Materials for Mechanical
Properties.
P-13-0708.......................... 07/12/2013 10/10/2013 CBI................... (G) Lubricant Additive.... (G) Zinc
Dialkyldithiocarbamate.
P-13-0709.......................... 07/12/2013 10/10/2013 CBI................... (G) Lubricant Additive.... (G) Zinc
Dialkyldithiocarbamate.
P-13-0710.......................... 07/12/2013 10/10/2013 CBI................... (G) Lubricant Additive.... (G) Zinc
Dialkyldithiocarbamate.
P-13-0711.......................... 07/12/2013 10/10/2013 CBI................... (G) Lubricant Additive.... (G) Zinc
Dialkyldithiocarbamate.
P-13-0712.......................... 07/12/2013 10/10/2013 CBI................... (G) Lubricant Additive.... (G) Zinc
Dialkyldithiocarbamate.
P-13-0713.......................... 07/12/2013 10/10/2013 CBI................... (G) Lubricant Additive.... (G) Zinc
Dialkyldithiocarbamate.
P-13-0714.......................... 07/15/2013 10/13/2013 CBI................... (G) Destructive And (G) Carbopolycycle Bis(Amine
Contained Use. Monocycle).
[[Page 38294]]
P-13-0715.......................... 07/11/2013 10/09/2013 CBI................... (S) Additive For Fibers In (G) Single-Walled Carbon
Fabrics; (S) Additive For Nanotubes.
Fibers In Structural And
Electrical uses; (S)
Additive For Transparency
And Conductivity; (S)
Additive In Lubricants
And Grease; (S) Additive
To Improve material
Strength; (S) Catalyst
Support In Fuel Cells;
(S) Coating Additive for
Improve Corrosion
Resistance; (S) Use As A
Nanoporous Network; (S)
Use As A Semi-Conductor,
Conductive, Or Resistive;
(S) Use As An
Electromechanical Switch;
(S) Use In Film Laminates
To Improve Structural,
Electrical, Or
Electrochemical
Properties Of Composite;
(S) Use In Separation Of
Chemicals; (S) Use With
Materials for Mechanical
Properties.
P-13-0716.......................... 07/11/2013 10/09/2013 CBI................... (S) Additive For Fibers In (G) Single-Walled Carbon
Fabrics; (S) Additive For Nanotubes.
Fibers In Structural And
Electrical uses; (S)
Additive For Transparency
And Conductivity; (S)
Additive In Lubricants
And Grease; (S) Additive
To Improve material
Strength; (S) Catalyst
Support In Fuel Cells;
(S) Coating Additive for
Improve Corrosion
Resistance; (S) Use As A
Nanoporous Network; (S)
Use As A Semi-Conductor,
Conductive, Or Resistive;
(S) Use As An
Electromechanical Switch;
(S) Use In Film Laminates
To Improve Structural,
Electrical, Or
Electrochemical
Properties Of Composite;
(S) Use In Separation Of
Chemicals; (S) Use With
Materials for Mechanical
Properties.
P-13-0717.......................... 07/15/2013 10/13/2013 CBI................... (G) Destructive And (G) Carbopolycycle
Contained Use. Bis(Substituted Amine
Monocycle.
P-13-0718.......................... 07/11/2013 10/09/2013 Nano-C, Inc........... Additive For Fibers In (G) Single-Walled Carbon
Fabrics; (S) Additive For Nanotubes.
Fibers In Structural And
Electrical uses; Additive
For Transparency And
Conductivity Additive In
Lubricants And Grease;
Additive To Improve The
Strength And Durability
Of Materials; Catalyst
Support In Fuel Cells;
Coating Additive To
Improve Corrosion
Resistance Use As A
Nanoporous Network; (S)
Use As A Semi-Conductor,
Conductive, Or Resistive
Element; Use As An
Electromechanical Switch,
Use In Film Laminates To
Improve Conductivity, Use
In Film Laminates To
Improve Structural,
Electrical, Or
Electrochemical
Properties.
P-13-0719.......................... 07/11/2013 10/09/2013 Nano-C, Inc........... .......................... (G) Single-Walled Carbon
Nanotubes.
[[Page 38295]]
P-13-0720.......................... 07/11/2013 10/09/2013 Nano-C, Inc........... (S) Additive For Fibers In (G) Single-Walled Carbon
Fabrics; (S) Additive For Nanotubes.
Fibers In Structural And
Electrical Applications;
(S) Additive For
Transparency And
Conductivity In
Electronic Devices; (S)
Additive In Lubricants
And Grease To Improve
Wear Resistance; (S)
Additive To Improve The
Strength And Durability
Of Materials And
Batteries; (S) Catalyst
Support For Use In Fuel
Cells; (S) Coating
Additive To Improve
Corrosion Resistance Of
Metals; (S) Use As A
Nanoporous Network In Gas
Diffusion Layers; (S) Use
As A Semi-Conductor,
Conductive, Or Resistive
Element In Electronic
Circuitry And Devices;
(S) Use As An
Electromechanical Switch
In Electronic Circuitry
And Devices; (S) Use In
Film Laminates To Improve
Conductivity In
Batteries, Capacitors,
And Fuel Cells; (S) Use
In Film Laminates To
Improve Structural,
Electrical, Or
Electrochemical
Properties Of Composite;
(S) Use In Separation Of
Chemicals; (S) Use With
Materials To Improve
Mechanical Properties Or
Electrical Conductivities.
P-13-0721.......................... 07/11/2013 10/09/2013 Nano-C, Inc........... (S) Additive For Fibers In (G) Single-Walled Carbon
Fabrics; (S) Additive For Nanotubes.
Fibers In Structural And
Electrical Applications;
(S) Additive For
Transparency And
Conductivity In
Electronic Devices; (S)
Additive In Lubricants
And Grease To Improve
Wear Resistance; (S)
Additive To Improve The
Strength And Durability
Of Materials And
Batteries; (S) Catalyst
Support For Use In Fuel
Cells; (S) Coating
Additive To Improve
Corrosion Resistance Of
Metals; (S) Use As A
Nanoporous Network In Gas
Diffusion Layers; (S) Use
As A Semi-Conductor,
Conductive, Or Resistive
Element In Electronic
Circuitry And Devices;
(S) Use As An
Electromechanical Switch
In Electronic Circuitry
And Devices; (S) Use In
Film Laminates To Improve
Conductivity In
Batteries, Capacitors,
And Fuel Cells; (S) Use
In Film Laminates To
Improve Structural,
Electrical, Or
Electrochemical
Properties Of Composite;
(S) Use In Separation Of
Chemicals; (S) Use With
Materials To Improve
Mechanical Properties Or
Electrical Conductivities.
P-13-0722.......................... 07/12/2013 10/10/2013 CBI................... (G) Polymer Additive...... (G) Quaternary Alkyl Ammonium
Sulfonimide.
P-13-0724.......................... 07/17/2013 10/15/2013 CBI................... (G) Coating Component..... (G) Polyurethane Prepolymer.
P-13-0725.......................... 07/16/2013 10/14/2013 Allnex USA Inc........ (S) Coating Resin For (G) Alkanedioc Acid, Polymer
Substrate Protection And With Substituted Oxirane
Aesthetics. Polymer With Substituted
Carbomonocyle, Di-Substituted
Alkane, Substituted Alkanoic
Acid, Substituted Cycloalkane
And Substituted Alkoxylated
Glycerol.
P-13-0726.......................... 07/16/2013 10/14/2013 Genagain Technologies, (S) Additive To Diesel (S) Waste Plastics, Pyrolyzed,
LLC. Fuel. Depolymd., Acid-Free, C6 21
Fraction. Definition: A
Complex Combination Of
Hydrocarbons Obtained By The
Distillation Of A Waste
Plastics Feed Under Vacuum
Usingwiped-Film Evaporation.
Is Consists Predominately Of
C6 To C21 Branched And Linear
Hydrocarbons, And Boils In The
range Of 50 [Acirc][deg]C To
320 [Acirc][deg]C (122
[Acirc][deg]F To 608
[Acirc][deg]F).
P-13-0747.......................... 07/18/2013 10/16/2013 CBI................... (G) Antioxidant/Stabilizer (G) Mixed Alkyl Phenyl
For Plastic. Phosphite.
P-13-0748.......................... 07/18/2013 10/16/2013 Zyvex Technolgies..... (G) Coating Attached To (G) Polymer Of Terepthalic Acid
Carbon Nanotubes. And Ethyl Benzene With
Mutiwalled Carbon Nanotube.
P-13-0751.......................... 07/18/2013 10/16/2013 CBI................... (G) Polymeric Colorant.... (G) Polyether Substituted
Polymeric Colorant.
[[Page 38296]]
P-13-0752.......................... 07/19/2013 10/17/2013 Allnex USA Inc........ (S) Isolated Intermediate (G) Substituted Polyethylene
For Manufacture Of A Glycol Monomethy Ether.
Coating Resin.
P-13-0754.......................... 07/23/2013 10/21/2013 CBI................... (S) Intermediate Reaction (G) Alkylphenol.
Product.
P-13-0766.......................... 07/24/2013 10/22/2013 CBI................... (G) Hydrocarbon Feedstock. (G) Hydrocarbon Feedstock.
P-13-0767.......................... 07/25/2013 10/23/2013 The Dow Chemical (G) Chemical Intermediate. (G) Substituted Picolinic Acid.
Company.
P-13-0768.......................... 07/25/2013 10/23/2013 CBI................... (G) The new substance is (G) Phenol, (Alkylidene)Bis-,
intended for use as a Polymer With
binder for industrial (Chloroalkyl)Oxirane,
waterborne coating Alkenoate,
applications. Bis(Hydroxyalkyl)Alkanoic
Acid, Hydroxyalkylacrylate,
Alkyl Polyalkyleneglycol,
Benzenedicarboxylic Acid,
Polymer With Alkanedioic Acid
And Alkanediol, Alkanediol,
Alkane, Diisocyanato-,
Homopolymer,
Isocyanatoalkyltrialkylcycloal
kyl Isocyanate And Alkylene
Diisocyanate.
P-13-0769.......................... 07/25/2013 10/23/2013 CBI................... (G) Printing Inks......... (G) Calcium Salt Of Aldehyde
Resins.
P-13-0770.......................... 07/26/2013 10/24/2013 CBI................... (G) Adhesive For (G) Latex Polymer.
Electrical Industry Use.
P-13-0771.......................... 07/26/2013 10/24/2013 CBI................... (G) Colorant For (G) Anthraquinone Polyamide.
Polyolefins.
P-13-0772.......................... 07/31/2013 10/29/2013 Huntsman.............. (G) Curing Agent.......... (G) Fatty Acids, C16 18 And C18-
Unsatuated, Polymers With
Ethyleneamine, Alkoxylated
Derivs.
P-13-0773.......................... 07/31/2013 10/29/2013 CBI................... (S) Herbicide Intermediate (S) 4-Pyrimidianamine, 2,5
Dimethoxy.
P-13-0774.......................... 07/31/2013 10/29/2013 CBI................... (S) Pour Point Depressant (G) Acrylic Polymer.
For Use In Oil.
Dispersant For Use In Oil.
P-13-0775.......................... 07/31/2013 10/29/2013 CBI................... (G) Used In The (G) Polyamic Acid.
Manufacture Of An Article.
P-13-0779.......................... 07/31/2013 10/29/2013 CBI................... (G) Assembly Adhesive..... (G) Isocyanic Acid,
Polymethylenepolyphenylene
Ester, Polymer With
Substituted Bisphenol And
Substituted Diepoxide.
P-13-0780.......................... 08/01/2013 10/30/2013 CBI................... (G) Oil And Water (G) Fluorinated Acrylic
Repellent And Release Copolymer.
Agent.
P-13-0781.......................... 08/01/2013 10/30/2013 Henkel Corporation.... (S) Site Limited (S) 4-Phenoxybutyl Bromide.
Intermediate To Cureable
Monomers.
P-13-0782.......................... 08/01/2013 10/30/2013 CBI................... (G) Reactive Prepolymer (G) Polyester Polyol.
For Polyurethane
Dispersions, Adhesives,
Sealants And Elastomers.
P-13-0786.......................... 08/01/2013 10/30/2013 CBI................... (S) Pigment For Automotive (G) Substituted Alkylsilanes,
Coatings To Be Used In Reaction Products With
Automotive Oem And Aluminum, Metal Oxide, Silica
Refinish. And Tin Oxide (Sno2).
P-13-0787.......................... 08/01/2013 10/30/2013 Syngenta Crop (G) Imported And Site (S) Benzenamine, 2-Ethyl-N-
Protection LLC. Limited Raw Material, [(1s)-2-Methoxy-1-Methylethyl]-
Used In The Manufacture 6-Methyl-.
Of An EPA FIFRA
Registerred Pesticid.
P-13-0788.......................... 08/02/2013 10/31/2013 Allnex USA Inc........ (G) Resin For Inks........ (G) Substituted Alkanediol,
Polymer With Heteromonocycles,
Substituted Carbomonocycle
Alkenoate, Reaction Products
With Dialkylamine.
P-13-0789.......................... 08/02/2013 10/31/2013 Allnex USA Inc........ (G) Resin For Inks........ (G) Substituted Alkanediol,
Polymer With Heteromonocycles,
Substituted Carbomonocycle
Alkenoate, Reaction Products
With Dialkylamine.
P-13-0793.......................... 08/02/2013 10/31/2013 CBI................... (S) Thin Film For (G) Functionalized Carbon
Electronic Device Nanotubes.
Applications.
P-13-0794.......................... 08/02/2013 10/31/2013 CBI................... (G) Additive, Open, Non- (G) Poly(Alkylmethacrylate-Co-
Dispersive Use. Dimethylaminoethylmethacrylate
).
P-13-0796.......................... 08/05/2013 11/03/2013 CBI................... (G) Additive For Polymer (G) Dicarbomonocycle-
Manufacturing. Substituted Carbomono
cycledicarboxamide.
P-13-0797.......................... 08/05/2013 11/03/2013 CBI................... (G) Additive For Polymer (G) Dicarbomonocycle-
Manufacturing. Substituted Carbomono
cycledicarboxamide.
P-13-0798.......................... 08/05/2013 11/03/2013 CBI................... (G) Additive For Polymer (G) Dicarboheterocycle-
Manufacturing. Substituted Carbomono
cycledicarboxamide.
P-13-0799.......................... 08/05/2013 11/03/2013 CBI................... (G) Additive For Polymer (G) Dicarbomonocycle-
Manufacturing. Substituted Carbomono
cycledicarboxamide.
P-13-0800.......................... 08/05/2013 11/03/2013 CBI................... (G) Additive For Polymer (G) Tricarbomonocycle-
Manufacturing. Substituted Carbomono
cycletricarboxamide.
P-13-0803.......................... 08/04/2013 11/02/2013 CBI................... (G) Assembly Adhesive..... (G),(G) Polymer With Aromatic
Diacids, Alkylene Diacid,
Substituted Alkylene Diol,
Unsubstituted Alkylene Diol
And Polymethylenepolyphenylene
Isocyanate Isocyanic Acid,
Polymethylenepolyphenylene
Ester, Polymer With
Substituted Bisphenol And
Substituted Diepoxide
Isocyanic Acid,
Polymethylenepolyphenylene
Ester, Polymer With
Unsubstituted Alkylene Diol,
Substituted Alkylene Diol And
Cyclic Alkylene Ester.
[[Page 38297]]
P-13-0804.......................... 08/05/2013 11/03/2013 Kaneka North America (G) Surface Active Agent.. (S) A Cyclic Oligopeptide
LLC. Produced By The Fermentation
Of Carbon And Nitrogen Sources
(Such As Soybean Meal,
Glucose,Maltose) Using
Bacillus Subtillis. The
Product Is The Sodium Salt Of
The Polypeptide. The
Individual Residues Include:L-
Glutamic Acid, D-Leucine, L-
Leucine, L-Valine, L-Aspartic
Acid, L-Isoleucine And .Beta.-
Hydroxy C12 17
Branchedalkanoic Acids.
P-13-0805.......................... 08/06/2013 11/04/2013 CBI................... (G) Used as a Receptive (G) Polu(Urethane Urea).
Coating In Ink-Jet
Printing.
P-13-0806.......................... 08/07/2013 11/05/2013 Mane USA.............. (S) Refreshing Agent in (S) Butanedioic Acid, 1-[ (1r,
Cosmetic Products. 2s, 5r)-5-Methyl-2-(1-
Methylethyl) Cyclohexyl ]
Ester.
P-13-0807.......................... 08/06/2013 11/04/2013 CBI................... (G) Lubricant Additive.... (G) Calcium Alkyl Salicylate.
P-13-0808.......................... 08/06/2013 11/04/2013 Hampford Research, Inc (G) UV Curable Coating.... (G) Polyether Urethane Acrylate
Oligomer.
P-13-0809.......................... 08/06/2013 11/04/2013 CBI................... (S) Acrylic Resin Used In (G) Melamine Acrylate.
UV Curable Inks And
Coatings.
P-13-0810.......................... 08/07/2013 11/05/2013 CBI................... (G) Inhibitor For Oil (G) Cycloalkylamino Oleylalkyl
Field Applications. Alkylamide Acid Salt.
P-13-0811.......................... 08/07/2013 11/05/2013 CBI................... (G) Inhibitor For Oil (G) Cycloalkylamino Oleylalkyl
Field Applications. Alkylamide Acid Salt.
P-13-0812.......................... 08/07/2013 11/05/2013 CBI................... (G) Inhibitor For Oil (G) Cycloalkylamino Oleylalkyl
Field Applications. Alkylamide Acid Salt.
P-13-0813.......................... 08/07/2013 11/05/2013 CBI................... (G) Inhibitor For Oil (G) Cycloalkylamino Oleylalkyl
Field Applications. Alkylamide Acid Salt.
P-13-0814.......................... 08/07/2013 11/05/2013 CBI................... (G) Inhibitor For Oil (G) Cycloalkylamino Oleylalkyl
Field Applications. Alkylamide Acid Salt.
P-13-0815.......................... 08/07/2013 11/05/2013 CBI................... (G) Inhibitor For Oil (G) Cycloalkylamino Oleylalkyl
Field Applications. Alkylamide Acid Salt.
P-13-0816.......................... 08/07/2013 11/05/2013 CBI................... (G) Inhibitor For Oil (G) Cycloalkylamino Cocoalkyl
Field Applications. Alkylamide Acid Salt.
P-13-0817.......................... 08/07/2013 11/05/2013 CBI................... (G) Inhibitor For Oil (G) Cycloalkylamino Cocoalkyl
Field Applications. Alkylamide Acid Salt.
P-13-0818.......................... 08/07/2013 11/05/2013 CBI................... (G) Inhibitor For Oil (G) Cycloalkylamino Cocoalkyl
Field Applications. Alkylamide Acid Salt.
P-13-0819.......................... 08/07/2013 11/05/2013 CBI................... (G) Inhibitor For Oil (G) Cycloalkylamino Cocoalkyl
Field Applications. Alkylamide Acid Salt.
P-13-0820.......................... 08/07/2013 11/05/2013 CBI................... (G) Inhibitor For Oil (G) Cycloalkylamino Cocoalkyl
Field Applications. Alkylamide Acid Salt.
P-13-0821.......................... 08/07/2013 11/05/2013 CBI................... (G) Inhibitor For Oil (G) Cycloalkylamino Cocoalkyl
Field Applications. Alkylamide Acid Salt.
P-13-0822.......................... 08/07/2013 11/05/2013 CBI................... (G) Additive, Open, Non- (G) Polyether Modified Acrylic
Dispersive Use. Ester Polymer With
Dimethylamino Groups.
P-13-0823.......................... 08/08/2013 11/06/2013 CBI................... (G) Rubber Products....... (G) Fluoroelastomer.
P-13-0824.......................... 08/08/2013 11/06/2013 CBI................... (G) Molding Material For (G) D-Glucitol, 1,4:3,6-
Film, Sheet, Plates, Dianhydro-, Polymer With 1,4-
Interior, Cases. Cycloalkanedimethanol And
Diphenyl Carbonate.
P-13-0825.......................... 08/09/2013 11/07/2013 CBI................... (G) Coating Material...... (G) Polyurethane.
P-13-0826.......................... 08/09/2013 11/07/2013 CBI................... (S) Thermoplastic (S) 2-Oxepanone, Polymer With
Urethanes For Recreation, 1,4-Butanediol, 1,4-
Industrial, Oil, Gas, And Disocyanatobenzene And 2,2-
Mining Applications. Dimethyl-1,3-Propanediol.
P-13-0827.......................... 08/12/2013 11/10/2013 CBI................... (G) Lubricating Oil (G) Alkyl Borate Esters And
Additive. Ethers.
P-13-0830.......................... 08/12/2013 11/10/2013 Alberdingk Boley Inc.. (S) Wood Coatings......... (G) Dicarboxylic Acid, Polymer
With Cycloalkyl Alkyl-2-
Alkennoate, N-(Dimethyl-
Oxoalkyl)-2-Alkyenamide,
Alkanediol, .Alpha.-Hydro-
.Omega.-
Hydroxypoly[Oxyalkanediyl], 3-
Hydroxy-2-(Hydroxymethyl)-
Alkyl Carboxylic Acid,
Isocyanato-(Isocyanatoalkyl)-
Trimethylcycloalkane And
Methylalkenoate, Alkyl
Hydroperoxide-Initiated,
Compounds with Tralkyllamine
Aaa.
P-13-0831.......................... 08/12/2013 11/10/2013 Alberdingk Boley Inc.. (S) Wood Coatings......... (G) Dicarboxylic Acid, Polymer
With N-(Dialkyl-Oxoalkyl)-
Alkennamide, Alkanediol,
Alkanediol, Hydroxy-
(Hydroxyalkyl)-Alkyl
Carboxylic Acid, Isocyanato-
(Isocyanatoalkyl)-
Trimethylcycloalkane,
Methylenebis[Isocyanatocycloal
kane] And Alkyl Alkyl-
Alkenoate, Compounds with
Dialkylalkylamine.
P-13-0832.......................... 08/12/2013 11/10/2013 Alberdingk Boley Inc.. (S) Wood Coatings......... (G) Dicarboxylic Acid, Polymer
With Cycloalkyl Alkyl-
Alkenoate, N-(Dialkyl-
Oxoalkyl)-Alkenamide,
Alkanediol, Hydroxy--
(Hydroxyalkyl)-Alkyl
Carboxylic Acid,
Methylenebis[Isocyanatocycloal
kane] And Alkyll Alkenoate,
Alkyl Hydroperoxide-Initiated,
Compounds with
Dialkylalkylamine.
[[Page 38298]]
P-13-0833.......................... 08/12/2013 11/10/2013 CBI................... (G) Assembly Adhesive..... (G); Isocyanic Acid,
Polymethylenepolyphenylene
Ester, Polymer With
Unsubstituted Alkylene Diol,
Substituted Alkylene Diol And
Cyclic Alkylene Ester,(G)
Isocyanic Acid,
Polymethylenepolyphenylene
Ester, Polymer With
Substituted Bisphenol And
Substituted Diepoxide,(G)
Polymer With Aromatic Diacids,
Alkylene Diacid, Substituted
Alkylene Diol, Unsubstituted
Alkylene Diol And
Polymethylenepolyphenylene
Isocyanate.
P-13-0834.......................... 08/13/2013 11/11/2013 CBI................... (G) Polymeric Colorant.... (G) Polyalkoxylated Polycyclic
Aromatic Amine Colorant.
P-13-0835.......................... 08/13/2013 11/11/2013 CBI................... (S) Polyurethane (G) Aliphatic Polyester Polyol.
Prepolymer.
P-13-0836.......................... 08/14/2013 11/12/2013 CBI................... (G) Ultra violet Catalyst. (G) Alkyl Carbonyl Alkyl Ether
Metal Complex.
P-13-0837.......................... 08/14/2013 11/12/2013 CBI................... (G) Component In Drilling (G) Amine Capped Fatty Acid
Fluids; Component In Dimer Polyamide.
Resin Coatings.
P-13-0839.......................... 08/14/2013 11/12/2013 CBI................... (G) Ingredient Of Pre-Coat (G) Methanamine, N,N-Dimethyl-,
Solution. Reaction Products With
Alkylamine-Epichlorohydrin
Polymer, Chlorides.
P-13-0840.......................... 08/15/2013 11/13/2013 Colonial Chemical, Inc (S) Oil Dispersant........ (S) D-Glucopyranose,
Oligomeric, Decyl Octyl
Glycosides, Polymers With
Epichlorohydrin And Sorbitan
Monooleate.
P-13-0841.......................... 08/15/2013 11/13/2013 Colonial Chemical, Inc (S) Intermediate For (S) (3-Chloro-2-Hydroxypropyl)
Surfactant Production; Dimethyloctadecylammonium
Chemical Intermediate For Chloride.
Sale Into Commerce.
P-13-0842.......................... 08/15/2013 11/13/2013 CBI................... (G) Hydraulic Fracturing (G) Poly(Oxyalkanediyl), Alpha-
Chemical. Hydro-Omega-Hydroxy-,
Mono(Alkyl And Alkenyl)Ethers,
Phosphates, Alkali Metal Salt.
P-13-0843.......................... 08/15/2013 11/13/2013 CBI................... (G) Hydraulic Fracturing (G) Poly(Oxyalkanediyl), Alpha-
Chemical. Hydro-Omega-Hydroxy-,
Mono(Alkyl And Alkenyl)Ethers,
Phosphates.
P-13-0846.......................... 08/19/2013 11/17/2013 Allnex USA Inc........ (G) Crosslinker For (G) Substituted Alkanoic Acid,
Coatings. Compounds with Substituted
Dialkylene-Substituted
Carbomonocycle-Substituted
Alkanediamine-Substituted
Heteromonocycle-Polyalkylene
Glycol-Substituted Dialkanol-
Substituted Carbomonocycle
Reaction Products.
P-13-0847.......................... 08/19/2013 11/17/2013 Allnex USA Inc........ (G) Resin For Waterborne (G) Heteropolycycle, Polymer
Coatings. With Substituted
Heteromonocycle, Polyalkylene
Glycol And Substituted
Carbomonocycle.
P-13-0848.......................... 08/02/2013 10/31/2013 Akzo Nobel Coatings, (S) To Be Used As A (G) alkyl polymer with alkyl
Inc. Coating By Body Shops For diol diisocyanate compound
Vehicles. with amine salt.
P-13-0849.......................... 08/19/2013 11/17/2013 CBI................... (G) Adhesive For (G) Modified Polymer Of
Electrical Industry Use. Ethenylbenzene, Buta-1,3-
Diene, And Substituted Methyl
Acrylates.
P-13-0851.......................... 08/26/2013 11/24/2013 CBI................... (G) Lubricant Additive.... (G) Sulfurized Ester.
P-13-0852.......................... 08/26/2013 11/24/2013 CBI................... (G) One Component Urethane (G) Alkyl Dioic Acid Polymer
Adhesive. With Poly-(Oxyalkyl)--Hydro--
Hydroxy-, And Aromatic
Diisocyanate.
P-13-0853.......................... 08/26/2013 11/24/2013 CBI................... (G) Polymer Additive For (G) Inorganic Acid, Triphenyl
Plastic Compounds. Ester, Polymer.
P-13-0854.......................... 08/27/2013 11/25/2013 CBI................... (G) Petroleum Production (G) Zinc Carboxylate Salt.
Chemical.
P-13-0856.......................... 08/27/2013 11/25/2013 CBI................... (G) Foam Insulation....... (G) Soybean Oil, Polymer With
Benzoic Acid, Difunctional
Glycols, Glycerol, Phthalic
Anhydride,Sorbitol,
Terephthalic Acid.
P-13-0858.......................... 08/27/2013 11/25/2013 CBI................... (G) Component For Toner (G) Diester.
Use.
P-13-0859.......................... 08/28/2013 11/26/2013 CBI................... (G) Component For Toner (G) Amide Resin.
Use.
P-13-0860.......................... 08/27/2013 11/25/2013 Alberdingk Boley Inc.. (S) Good Adhesion (G) Alkanedicarboxylic Acid,
Properties For Plastic Polymer With Alkanediamine,
Coatings. Alkanediol, Hydroxy-
(Hydroxymethyl)-
Alkanecarboxylic Acid
Andmethylenebis[Isocyanatocycl
oalkane] Compound with
(Dialkylamino)Alkanol.
P-13-0861.......................... 08/27/2013 11/25/2013 Alberdingk Boley Inc.. (S) Good Adhesion (G) Alkanedicarboxylic Acid,
Properties For Plastic Polymer With Alkanediol,
Coatings. Hydroxy-(Hydroxyalkyl)-Alkane
Carboxylic Acid And
Methylenebis[4-
Isocyanatocycloalkane],
Compound with Dialkylamine.
P-13-0862.......................... 08/28/2013 11/26/2013 CBI................... (G) Component Of Polymer (G) Aromatic Dicarboxylic Acid,
Film. Polymers With Aliphatic
Polyols And Substituted
Alkenes.
P-13-0863.......................... 08/28/2013 11/26/2013 CBI................... (G) Used In The (G) Fluorinated Aromatic
Manufacture Of An Article. Polyamic Acid Polymer.
P-13-0864.......................... 08/28/2013 11/26/2013 CBI................... (G) Chemical Intermediate. (G) Chloridite.
P-13-0865.......................... 08/28/2013 11/26/2013 CBI................... (G) Coating Additive (G) Poly(Oxy-1,2-Ethanediyl), -
(Open, Non-Dispersive [[[3-[(Carboxyamino)Methyl]-
Use). 3,5,5-
Trimethylcyclohexyl]Amino]Carb
onyl]--[[[[3-
[(Carboxyamino)Methyl]-3,5,5-
Trimethylcyclohexyl]Amino]Carb
onyl]Oxy]-, Mixed 4-
Alkylcyclohexyl And Lauryl
Diesters.
P-13-0866.......................... 08/28/2013 11/26/2013 Firmenich Inc......... (S) Fragrance Ingredient (S) Oils, Aquilaria Crassna.
For The Use In Cosmetic
Products.
[[Page 38299]]
P-13-0867.......................... 08/28/2013 11/26/2013 CBI................... (G) Component Of Polymer (G) Aromatic Dicarboxylic Acid,
Film. Polymers With Aliphatic
Polyols And Substituted
Alkenes.
P-13-0868.......................... 08/29/2013 11/27/2013 CBI................... (G) Functions As An Oil- (G) Tall Oil Fatty Acid
Soluble Corrosion Diethylenetriamine Compounds
Inhibitor For Use In Oil with Substituted Polyethylene
And Gas Wells And Glycol Ether.
Pipelines.
P-13-0869.......................... 08/30/2013 11/28/2013 Mane USA.............. (S) Fine Fragrance; (S) 2-Cyclohexen-1-Ol, 2,6-
Fragrance In A Cosmetic Dimethyl-4-(2,2,3-Trimethyl-3
Product; Fragrance In A Cyclopenten-1-Yl)-.
Non-Cosmetic Product.
P-13-0871.......................... 08/30/2013 11/28/2013 CBI................... (G) Rheology Modifier..... (G) Polyalkylene Glycol,
Polymer With Alkylisocyanate
And Alkylphenol.
P-13-0872.......................... 08/30/2013 11/28/2013 Lamberti USA.......... (G) Removal Of Hydrogen (G) Alkyl Triazine.
Sulfide.
P-13-0874.......................... 08/30/2013 11/28/2013 CBI................... (G) Chemical Intermediate. (G) Substituted Phenol.
P-13-0875.......................... 08/30/2013 11/28/2013 CBI................... (G) Chemical Intermediate. (G) Substituted Phenol.
P-13-0876.......................... 08/30/2013 11/28/2013 CBI................... (G) Chemical Intermediate. (G) Substituted Phenol.
P-13-0877.......................... 08/30/2013 11/28/2013 CBI................... (G) Chemical Intermediate. (G) Substituted Phenol.
P-13-0878.......................... 09/02/2013 12/01/2013 CBI................... (S) Acrylic Resin Used In (G) Reaction Product Of Acrylic
Ultra violet Curable Inks Acid And Isocyanate.
And Coatings.
P-13-0879.......................... 09/02/2013 12/01/2013 CBI................... (S) Intermediate Reaction (G) Alkylphenol.
Product Used As Input To
Further Polymer Reaction.
P-13-0880.......................... 09/03/2013 12/02/2013 CBI................... (G) Binder In Primer...... (G) Polyurethane Crosslinker.
P-13-0881.......................... 09/03/2013 12/02/2013 Firmenich Inc......... (G) Fragrance Ingredient (S) Patchouli Essential Oil
For The Use In Consumer Produced By Fermentation Of A
Products (Cosmetic And Sugar Source.
Household Use).
P-13-0882.......................... 09/04/2013 12/03/2013 CBI................... (G) Destructive Use....... (G) Alkylated Benzene,
Brominated,(G) Alkylated
Benzene, Dibrominated.
P-13-0883.......................... 09/05/2013 12/04/2013 CBI................... (G) Corrosion Inhibitor (G) Fatty Acids, Tall Oil,
For Down-Hole Well Reaction Products With
Treatment And Pipelines Polyamine, 2-Mercaptoacetate.
Used In The Oil And Gas
Industry.
P-13-0884.......................... 09/06/2013 12/05/2013 CBI................... (S) Dye Intermediate...... (G) Substituted Bipyridinium
Salt.
P-13-0885.......................... 09/06/2013 12/05/2013 CBI................... (S) Raw Material Used In (G) Mono Function Acrylate.
The Manufacture Of Ultra
violet Coatings And Inks.
P-13-0886.......................... 09/06/2013 12/05/2013 CBI................... (G) Rubber Products....... (G) Hydrofluoroolefin Polymer
With 1,1-Difluoroethene.
P-13-0906.......................... 09/09/2013 12/08/2013 CBI................... (S) Pretreatment To Be (G) Silicate-Silane.
Applied On A Steel
Substrate In Liquid Form,
Dried, And Covered By A
Paint Layer.
Aternatively, To Be
Applied On A Galvanized
Steel Substrate As A
Shipout Passivate And Not
Further Painted.
P-13-0907.......................... 09/09/2013 12/08/2013 CBI................... (G) Additive, Open, Non- (G) Epoxy Resin, Reaction
Dispersive Use. Products With Alkanolamines.
P-13-0908.......................... 09/09/2013 12/08/2013 CBI................... (G) Additive, Open, Non- (G) Polyether Polyester
Dispersive Use. Urethane Phosphate.
P-13-0909.......................... 09/09/2013 12/08/2013 CBI................... (G) Additive, Open, Non- (G) Byk-Lp X 22338 (Substances
Dispersive Use. Notified).
P-13-0910.......................... 09/09/2013 12/08/2013 CBI................... (G) Surfactant Or (G) Glycolipid.
Emulsifier.
P-13-0911.......................... 09/09/2013 12/08/2013 CBI................... (G) Surfactant Or (G) Glycolipid.
Emulsifier.
P-13-0912.......................... 09/09/2013 12/08/2013 CBI................... (G) Surfactant Or (G) Glycolipid.
Emulsifier.
P-13-0913.......................... 09/09/2013 12/08/2013 CBI................... (G) Surfactant Or (G) Glycolipid.
Emulsifier.
P-13-0915.......................... 09/11/2013 12/10/2013 CBI................... (G) Production Aid For (G) Fatty Acids Esters,
Chemical Processing. Reaction Products With Amines.
P-13-0916.......................... 09/11/2013 12/10/2013 CBI................... (S) Reactive Polymer For (G) Polyurethane.
Use In Adhesive
Applications.
P-13-0917.......................... 09/11/2013 12/10/2013 Lamberti USA.......... (G) Limit Scale Build Up.. (G) Alkylphosphonate.
P-13-0918.......................... 09/11/2013 12/10/2013 Henkel Corporation.... (S) Chemical Intermediate (S) Siloxanes And Silicones, Di-
To Cureable Monomer. Me, Hydrogen-Terminated,
Polymers With 2,4,6,8-
Tetraethenyl-2,4,6,8-
Tetramethylcyclotetrasiloxane.
.
P-13-0919.......................... 09/11/2013 12/10/2013 CBI................... (G) Industrial Feedstock (G) Glycerides, C14 18, C16 18
Chemical. Unsaturated, From
Fermentation.
P-13-0920.......................... 09/12/2013 12/11/2013 Biochar Now LLC....... (S) Filler For Plastics Or (S) Charcoal Or Biochar.
Polymers; Soil Amendment.
P-13-0923.......................... 09/13/2013 12/12/2013 CBI................... (S) Reactive Polymer For (G) Acrylate Polymer.
Use In Paints.
P-13-0924.......................... 09/17/2013 12/16/2013 Lambent Technologies.. (S) Anti-Wear Additive For (G) Phosphated Mono And Di-
Lubricants, Greases, And Glycerides (Pmdg).
Metalworking Fluids.
P-13-0925.......................... 09/17/2013 12/16/2013 CBI................... (S) Raw Material In Powder (G) Vinyl Ether Urethane Resin.
Coatings.
P-13-0927.......................... 09/19/2013 12/18/2013 CBI................... (G) Coloring Component.... (G) N-(Dialkylamino)Alkyl-
Dialkylphenyl-
Tetrahydrodioxopyrrolopyrrolyl-
Benzamide.
P-13-0928.......................... 09/19/2013 12/18/2013 CBI................... (G) Fabrication Of (G) Unsaturated Polyester Resin
Composite Articles. In Reactive Solvent.
P-13-0930.......................... 09/23/2013 12/22/2013 CBI................... (G) Reactant In (G) Substituted Phenol.
Polymerization Reaction.
P-13-0931.......................... 09/23/2013 12/22/2013 Henkel Corporation.... (S) Polymerizable (S) 2-Propenoic Acid, 4-
Component in Adhesive Phenoxybutyl Ester.
Formulations.
P-13-0932.......................... 09/23/2013 12/22/2013 CBI................... (G) Adhesive For Open Non- (G) Polyester Adduct.
Descriptive Use.
[[Page 38300]]
P-13-0933.......................... 09/24/2013 12/23/2013 CBI................... (G) Contained Use In (G) Organic Phosphonate Salt.
Energy Production.
P-13-0934.......................... 09/24/2013 12/23/2013 CBI................... (S) Polymer For Soft-Feel (G) Polyether Polyurethane
Effects Coatings For Film. Polymer.
P-13-0935.......................... 09/24/2013 12/23/2013 CBI................... (G) Adhesive For Open Non- (G) Polyisocyanate Adduct.
Descriptive Use.
P-13-0936.......................... 09/25/2013 12/24/2013 CBI................... (G) Contained Use In (G) Organic Phosphonate Salt.
Energy Production.
P-13-0937.......................... 09/25/2013 12/24/2013 Pennzoil-Quaker State (G) SHELL ONDINA.......... (S) Distillates (Fischer-
Company. Tropsch), Heavy, C18 50-
Branched, And Linear.
P-13-0939.......................... 09/13/2013 12/12/2013 CBI................... (S) A Polymerized (G) Silyl Modified Polymer.
Component In Novel
Adhesive/Sealant
Formulations.
P-13-0940.......................... 09/13/2013 12/12/2013 Cray Valley USA, LLC.. (G) Additive For Rubber (S) 1,3-Butadiene, Homopolymer,
Goods To Improve Triethoxysilyl-Terminated.
Properties.
P-13-0941.......................... 09/13/2013 12/12/2013 Umicore Precious (S) Inhibited Curing Agent (S) Platinate (2-), Hexachloro-
Metals NJ, LLC. , Hydrogen (1:2), (Oc-6-11)-,
Reaction Product With Carbon
Monoxideand 2, 4, 6, 8-
Tetraethenyl-2, 4, 6, 8-
Tetramethylcyclotetrasiloxane.
P-13-0942.......................... 09/27/2013 12/26/2013 CBI................... (G) Coating Material...... (G) Copolymer Of Alkyl
Methacrylate.
P-13-0943.......................... 09/30/2013 12/29/2013 Henkel Corporation.... (S) Polymerizable (S) Benzene, 1,4-Bis(1-Chloro-1-
Component In Adhesive And Methylethyl)-,Reaction
Sealant Formulations. Products With Polyisobutylene,
Bis[3-[(1-Oxo-2-Propen-1-
Yl)Oxy]Propyl]-Teminated.
P-13-0944.......................... 09/27/2013 12/26/2013 Elantas PDG, Inc...... (S) Coating For Electrical (S) 5-Isobenzofurancarboxylic
Equipment. Acid, 1,3-Dihydro-1,3-Dioxo-,
Polymer With 2-Aminoethanol,
2,2-Dimethyl-1,3-Propanediol,
2,5-Furandione And 3a,4,7,7a-
Tetrahydro-1,3-
Isobenzofurandione.
P-13-0945.......................... 09/30/2013 12/29/2013 CBI................... (G) Industrial (G) Alkoxysilane.
Thermoplastic Additive.
P-13-0946.......................... 09/30/2013 12/29/2013 CBI................... (G) Industrial (G) Alkoxysilane.
Thermoplastic Additive.
P-13-0947.......................... 09/27/2013 12/26/2013 CBI................... (G) Open, Non-Dispersive (G) Hydroxy Functional
Use. Polyester.
P-13-0948.......................... 09/30/2013 12/29/2013 Lambent Technologies.. (S) Lubricant Additive.... (G) Amine Phosphate.
P-13-0949.......................... 09/30/2013 12/29/2013 CBI................... (G) Inks.................. (G) Nickel,
Bisdiphenylimidazolidinetrithi
one.
P-13-0950.......................... 09/30/2013 12/29/2013 CBI................... (G) Rheology Modifier..... (G) Polyalkylene Glycol,
Polymer With Alkylisocyanate
And Alkylphenol.
P-13-0951.......................... 09/30/2013 12/29/2013 CBI................... (G) A Destructive Use In (G) Zinc Carboxylate.
The Manufacture Of
Coating Materials And
Fuels.
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
received by EPA during this period: The EPA case number assigned to the
NOC, the date the NOC was received by EPA, the projected end date for
EPA's review of the NOC, and chemical identity.
Table II--63 NOCs Received From 5/23/13 to 9/30/13
----------------------------------------------------------------------------------------------------------------
Commencement
Case No. Received date notice end date Chemical
----------------------------------------------------------------------------------------------------------------
P-07-0011......................... 08/22/2013 08/15/2013 (G) Alkylated Phenol.
P-09-0011......................... 08/15/2013 07/26/2013 (G) Unsaturated Urethane Acrylate.
P-09-0356......................... 09/19/2013 06/19/2013 (G) Zirconium Lysine Complex.
P-10-0484......................... 08/22/2013 02/22/2012 (G) Esterified Polymer Of Styrene,
Maleic Anhydride And Ethenylbenzene,
Potassium Salt.
P-11-0074......................... 09/24/2013 09/05/2013 (G) Glyceryl Polypropylene Glycol
Ether Polymer With Isophorone
Diisocyanate, Methacrylate Blocked.
P-11-0177......................... 08/05/2013 07/12/2013 (S) Dodecanedioic Acid, Polymer With
2,2-Dimethyl-1,3-Propanediol, 2-Ethyl-
2-(Hydroxymethyl)-1,3-Propanediol,
Hydrazine, 3-Hydroxy-2-
(Hydroxymethyl)-2-Methylpropanoic
Acid And 1,1'-Methylenebis[4-
Isocyanatocyclohexane], Compound.
With N,N-Diethylethanamine.
P-11-0270......................... 08/28/2013 09/01/2011 (S) Lead Strontium Titanium Zirconium
Oxide.
P-11-0560......................... 09/16/2013 12/15/2012 (G) Alkylated Diphenyl Ethers.
P-12-0032......................... 09/05/2013 09/04/2013 (G) Modified Fluorinated Acrylate.
P-12-0138......................... 09/24/2013 09/05/2013 (G) Hydroxy Phenyl Fatty Acids.
P-12-0149......................... 08/19/2013 07/30/2013 (G) Brominated Distillation Bottoms.
P-12-0194......................... 09/25/2013 09/17/2013 (G) Amines, Bis(Alkyl). 3-
[Bis(Alkylalkoxy)Phosphinothioyl]Thio
]-2-Alkylalkananoates.
P-12-0342......................... 08/02/2013 08/01/2013 (S) 3[Cis-4-(2-
Methylpropyl)Cyclohexyl]Propanal*.
P-12-0408......................... 08/13/2013 08/07/2013 (G) Alkenedioic Acid Dialkyl Ester,
Reaction Products With Alkenoic Acid
Alkyl Esters.
P-12-0441......................... 08/01/2013 01/08/2013 (G) A Glucopyranose.
P-12-0493......................... 09/06/2013 04/03/2013 Null.
P-12-0532......................... 08/14/2013 07/23/2013 (G) Tetrasubstituted Dioxadithiane.
P-12-0557......................... 08/16/2013 07/29/2013 (S) Tires, Wastes, Pyrolyzed, C8 25
Oil Fraction.
P-12-0558......................... 08/16/2013 07/29/2013 (S) Tires, Wastes, Pyrolyzed, C21 33
Oil Fraction.
[[Page 38301]]
P-13-0010......................... 09/04/2013 08/30/2013 (S) 1,4-Cyclohexanedicarboxylic Acid,
1,4-Dimethyl Ester, Hydrogenolysis
Products.
P-13-0033......................... 08/23/2013 08/22/2013 (G) Dialkyl Thiophenol, Manufactor Of,
By-Products From.
P-13-0034......................... 08/23/2013 08/22/2013 (G) Alkylthiophenamine, Manufactor Of,
By-Products From.
P-13-0055......................... 08/23/2013 08/22/2013 (G) Alkaneamide, Halo-Dialkylthienyl-
Alkoxydialkyl-, Manufactor Of, By-
Products From.
P-13-0110......................... 08/22/2013 08/09/2013 (G) Hydroxyalkyl Methacrylate,
Reaction Product With Cyclic Ether.
P-13-0131......................... 08/06/2013 07/20/2013 (G) Tertiary Ammonium Compound.
P-13-0140......................... 09/25/2013 09/18/2013 Null.
P-13-0173......................... 08/12/2013 07/16/2013 (S) 9-Dodecanoic Acid, Methyl Ester*.
P-13-0189......................... 08/06/2013 07/10/2013 (G) Depolymerized Waste Plastics.
P-13-0214......................... 08/30/2013 08/21/2013 (G) Polymer Reaction Product Of
Formaldehyde, Chloromethyl Oxirane,
Phenol, 1,3-Isobenzofurandione, With
N-(2-Aminoethyl)-1,2-Ethanediamine
And Phenol With Tetrahydro-Methano-
Indene Glycidyl Ether.
P-13-0218......................... 08/05/2013 07/28/2013 (S) Bicyclo[2.2.1]Hept-2-Ene, 5-
Ethenyl-, Polymer With Ethene, 5-
Ethylidenebicyclo[2.2.1]Hept-2-Ene
And 1-Propene.
P-13-0228......................... 08/28/2013 08/14/2013 (S) Phosphine, Triphenyl-, Reaction
Products With Brominated Isobutylene-
Isoprene Polymer.
P-13-0260......................... 09/20/2013 08/28/2013 (G) Zinc Bis(Dialkyldithiocarbamate).
P-13-0315......................... 09/05/2013 08/24/2013 (G) 1,4-Benzenedicarboxylic Acid,
Polymer With Substituted-2,5-
Furandione, Carboxylic Acid,
Substituted Carbomonocycle
Ethoxylated, Substituted
Carbomonocycle Propoxylated And
Polyol.
P-13-0316......................... 09/23/2013 09/10/2013 (G) Copolymer Of Methacryclic Acid
Derivatives.
P-13-0320......................... 09/16/2013 09/05/2013 (G) Substituted Dicarboxylic Acid,
Polymer With Substituted Benzenamine
And Substituted Dicarboxylic Acid.
P-13-0330......................... 09/30/2013 09/23/2013 (G) Fatty Acids, C18, Dimers, Dialkyl
Esters, Hydrogenated, Polymers With
Alkanedioic Acid, 1,3-Bis-(Isocyanato-
1-Alkyl)Benzene, 3-Hydroxy-2-
(Hydroxymethyl)-2-Alkylpropenoic
Acid, 1,1'-Methylenebis
[Isocyanatocycloalkane], Neopentyl
Glycol And Oxepanone Compounds With
Trialkyl Amine.
P-13-0337......................... 08/15/2013 07/31/2013 (G) Fatty Acid Phthalate Alkyd
Polymer.
P-13-0341......................... 08/12/2013 07/18/2013 (S) 9-Dodecenoic Acid, Methyl Ester.
P-13-0358......................... 08/05/2013 07/03/2013 (G) Vegetable Oil Esters.
P-13-0374......................... 09/05/2013 09/03/2013 (G) Substituted Picolinic Acid.
P-13-0378......................... 09/05/2013 09/03/2013 (G) Carboxylic Anhydride, Polymer With
-Hydro-Hydroxypoly(Oxy-1,2-
Diethanediyl), Compound. With
2,3,4,6,7,8,9,10-Octahydropyrimido-
[1,2-A]Azepine.
P-13-0380......................... 09/12/2013 09/10/2013 (S) 2-Propenoic Acid, 2-Methyl-, 1,1-
Dimethylethyl Ester, Polymer With
Butyl 2-Propenoate, Ethenylbenzene
And 2-Oxiranylmethyl 2-Methyl-2-
Propenoate, 2-Propenoate.
P-13-0381......................... 08/22/2013 08/19/2013 (G) Pyrrolopyrrol.
P-13-0387......................... 08/12/2013 08/05/2013 (G) Amines, Polyethylenepoly-,
Reaction Products With Aryl Anhydride
And Succinic Monopolyisobutylene
Derivs.
P-13-0388......................... 08/05/2013 07/28/2013 (G) Hexanedioic Acid, Polymer With 1,2-
Butanediol, Diesters With Alkene
Reaction Products.
P-13-0390......................... 09/25/2013 09/24/2013 (G) Halogenated, Substituted Picolinic
Ester.
P-13-0392......................... 09/16/2013 09/11/2013 (G) Acrylic Acid Esters Polymer With
Polyisocyanate.
P-13-0405......................... 08/26/2013 08/17/2013 (S) Carbonic Acid, Dimethyl Ester,
Polymer With 1,4-Diisocyanatobenzene,
1,6-Hexanediol And 2,2'-[1,4-
Phenylenebis(Oxy)]Bis]Ethanol].
P-13-0406......................... 08/07/2013 08/05/2013 (S) 2h-2,4a-Methanonaphthalen-1(5h)-
One, Hexahydro-5,5-Dimethyl-2-Propyl-
.
P-13-0407......................... 09/03/2013 08/15/2013 (G) Triazinylaminostilbene.
P-13-0414......................... 08/22/2013 07/31/2013 (S) 1,4-Benzenedicarboxylic Acid,
Polymer With [1,1'-Biphenyl]-
3,3',4,4'-Tetramine*.
P-13-0415......................... 08/27/2013 08/16/2013 (S) Pyridine, 2,2'-Dithiobis.
P-13-0421......................... 08/27/2013 08/13/2013 (S) 4,7-Methano-1h-Indene-5-
Acetaldehyde, Octahyro-*,(S) 4,7-
Methano-1h-Indene-5-Carboxaldehyde,
Octahydro-6-Methyl-.
P-13-0447......................... 08/30/2013 08/21/2013 (G) Carboxylic Anhydride, Polymer With
-Hydro-Hydroxypoly(Oxy-1,2-
Ethanediyl), Compound. With N,N'-
Bis[3-(Dimethylamino)Propyl]Urea.
P-13-0448......................... 09/11/2013 09/06/2013 (G) Propoxylated Glycerol Aliphatic
Diacid Acrylated Polymer, Polymer
With Aliphatic Diamine.
P-13-0458......................... 09/30/2013 09/20/2013 (G) Substituted Carbopolycycle,
Polymer With Substituted
Carbomonocycle, Alkanoic Acid Ester
and Tetrasubstituted Alkane-Blocked.
P-13-0463......................... 09/30/2013 09/11/2013 (G) Substituted Polysiloxane.
P-13-0465......................... 09/30/2013 09/20/2013 (G) Substituted Benzotriazole.
P-13-0466......................... 09/30/2013 09/16/2013 (G) Substituted Polysiloxane.
P-13-0557......................... 09/25/2013 09/09/2013 (G) Tall Oil Fatty Acid, Compound With
Cyclic Amine.
P-13-0620......................... 09/23/2013 09/11/2013 (G) Polymer Of Aliphatic Acids,
Aliphatic Diols, Aliphatic Polyols,
Oligomeric Silsesquioxane, And
Aromatic Acids.
P-13-0629......................... 09/12/2013 09/09/2013 (S) 2-Propenoic Acid, 2-Methyl-,Methyl
Ester, Polymer With Butyl 2-
Propenoate, Ethenylbenzene And 2-
Oxiranylmethyl 2-Methyl-2-Propenoate,
2-Propenoate, 1,1-Dimethylpropyl 2-
Ethylhexaneperoxoate-Initiated.
P-96-1093......................... 09/26/2013 09/22/2013 (G) Polyetherisocyanate Silane Adduct.
----------------------------------------------------------------------------------------------------------------
[[Page 38302]]
If you are interested in information that is not included in these
tables, you may contact EPA as described in Unit III. to access
additional non-CBI information that may be available.
List of Subjects
Environmental protection, Chemicals, Hazardous substances, Imports,
Notice of commencement, Premanufacturer, Reporting and recordkeeping
requirements, Test marketing exemptions.
Dated: June 24, 2014.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2014-15760 Filed 7-3-14; 8:45 am]
BILLING CODE 6560-50-P