Foreign-Trade Zone (FTZ) 158-Vicksburg/Jackson, Mississippi, Notification of Proposed Production Activity, Southern Motion, Inc., (Upholstered Furniture), Pontotoc and Baldwyn, Mississippi, 37281-37282 [2014-15425]
Download as PDF
<![CDATA[
37281
Federal Register / Vol. 79, No. 126 / Tuesday, July 1, 2014 / Notices
LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT ASSISTANCE
[06/20/2014 through 06/25/2014]
Date accepted for
investigation
Firm name
Firm address
Century Fastener and Machine Co., Inc
5661 Howard Street, Niles, IL 60714 ...
6/23/2014
Essex Industries, Inc ..............................
7700 Gravois Road, St. Louis, MO
63123.
6/25/2014
Any party having a substantial
interest in these proceedings may
request a public hearing on the matter.
A written request for a hearing must be
submitted to the Trade Adjustment
Assistance for Firms Division, Room
71030, Economic Development
Administration, U.S. Department of
Commerce, Washington, DC 20230, no
later than ten (10) calendar days
following publication of this notice.
Please follow the requirements set
forth in EDA’s regulations at 13 CFR
315.9 for procedures to request a public
hearing. The Catalog of Federal
Domestic Assistance official number
and title for the program under which
these petitions are submitted is 11.313,
Trade Adjustment Assistance for Firms.
Dated: June 25, 2014.
Michael DeVillo,
Eligibility Examiner.
[FR Doc. 2014–15379 Filed 6–30–14; 8:45 am]
BILLING CODE 3510–WH–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–46–2014]
emcdonald on DSK67QTVN1PROD with NOTICES
Foreign-Trade Zone 176—Rockford,
Illinois; Application for Expansion of
Subzone 176E; UniCarriers Americas
Corporation; Marengo, Illinois
An application has been submitted to
the Foreign-Trade Zones (FTZ) Board by
the Greater Rockford Airport Authority,
grantee of FTZ 176, requesting an
expansion of Subzone 176E on behalf of
UniCarriers Americas Corporation,
located in Marengo, Illinois. The
application was submitted pursuant to
the provisions of the Foreign-Trade
Zones Act, as amended (19 U.S.C. 81a–
81u), and the regulations of the FTZ
Board (15 CFR part 400). It was formally
docketed on June 26, 2014.
Subzone 176E was approved by the
FTZ Board on August 21, 2006 (Board
Order 1475, 71 FR 51184, 8–29–2006).
The subzone currently consists of the
following sites: Site 1 (23 acres) 240 N.
Prospect Street, Marengo, McHenry
VerDate Mar<15>2010
19:00 Jun 30, 2014
Jkt 232001
County; Site 2 (11 acres) 19720 East
Grant Highway, Marengo, McHenry
County; and, Site 3 (1.86 acres) 308
South Division Street, Harvard,
McHenry County.
The current request involves
expanding the subzone to include an
additional site: Site 4 (19 acres) 201 N.
Prospect Street, Marengo, McHenry
County. No authorization for additional
production activity has been requested
at this time.
In accordance with the FTZ Board’s
regulations, Elizabeth Whiteman of the
FTZ Staff is designated examiner to
review the application and make
recommendations to the FTZ Board.
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is August
11, 2014. Rebuttal comments in
response to material submitted during
the foregoing period may be submitted
during the subsequent 15-day period to
August 25, 2014.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For further information, contact
Elizabeth Whiteman at
Elizabeth.Whiteman@trade.gov or
(202) 482–0473.
Dated: June 26, 2014.
Elizabeth Whiteman,
Acting Executive Secretary.
[FR Doc. 2014–15421 Filed 6–30–14; 8:45 am]
BILLING CODE 3510–DS–P
PO 00000
Frm 00011
Fmt 4703
Sfmt 4703
Product(s)
The firm manufactures various types of
fasteners and small industrial pumps.
The firm manufactures regulators, oxygen conserving devices, and liquid
oxygen systems used for medical applications.
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–45–2014]
Foreign-Trade Zone (FTZ) 158—
Vicksburg/Jackson, Mississippi,
Notification of Proposed Production
Activity, Southern Motion, Inc.,
(Upholstered Furniture), Pontotoc and
Baldwyn, Mississippi
The Greater Mississippi ForeignTrade Zone, Inc., grantee of FTZ 158,
submitted a notification of proposed
production activity on behalf of
Southern Motion, Inc. (SMI), located in
Pontotoc and Baldwyn, Mississippi. The
notification conforming to the
requirements of the regulations of the
FTZ Board (15 CFR 400.22) was
received on June 20, 2014.
A separate application for subzone
designation at the SMI facilities was
submitted and will be processed under
Section 400.31 of the FTZ Board’s
regulations. The facilities are used to
manufacture and distribute upholstered
furniture as well as cut-and-sewn
upholstery covering sets. The proposal
indicates that SMI seeks to utilize
foreign-origin ‘‘micro-denier suede’’
fabric finished with a hot caustic soda
solution that would be transformed into
furniture upholstery covering sets under
FTZ procedures. The finished
upholstery covering sets would then be
assembled into finished chairs, seats,
sofas, loveseats, and sectionals
manufactured at the SMI facilities in
Mississippi. All foreign upholstery
fabric other than micro-denier suede
fabric used in SMI’s production within
FTZ 158 would be admitted to the
proposed subzone in domestic (dutypaid) status (19 CFR 146.43), thereby
precluding FTZ-related duty savings on
such fabrics.
Pursuant to 15 CFR 400.14(b), FTZ
activity would be limited to the specific
foreign-status materials and components
and specific finished products described
in the submitted notification (as
described below) and subsequently
authorized by the FTZ Board.
E:\FR\FM\01JYN1.SGM
01JYN1
37282
Federal Register / Vol. 79, No. 126 / Tuesday, July 1, 2014 / Notices
Production under FTZ procedures
could exempt SMI from customs duty
payments on the foreign micro-denier
suede upholstery fabric used in export
production. On its domestic sales, SMI
would be able to apply the finished
upholstery cover set (i.e., furniture part)
or finished furniture duty rate (free) for
the micro-denier suede upholstery
fabric described below. Customs duties
also could possibly be deferred or
reduced on foreign status production
equipment.
The proposed scope of authority
under FTZ procedures would only
involve micro-denier suede upholstery
fabrics finished with a hot caustic soda
solution process (the applicant indicates
such fabric is not produced by U.S.
mills), as detailed in the notification
(duty rate ranges from 2.7 to 17.2%). All
other material inputs used in the
production activity would be in
domestic status.
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is August
11, 2014.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
FOR FURTHER INFORMATION CONTACT:
Pierre Duy at Pierre.Duy@trade.gov, or
(202) 482–1378.
Dated: June 25, 2014.
Elizabeth Whiteman,
Acting Executive Secretary.
[FR Doc. 2014–15425 Filed 6–30–14; 8:45 am]
BILLING CODE 3510–DS–P
Dated: June 24, 2014.
Eileen M. Albanese,
Acting Director, Office of Exporter Services.
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
[FR Doc. 2014–15389 Filed 6–30–14; 8:45 am]
emcdonald on DSK67QTVN1PROD with NOTICES
In the Matter of: Kue Sang Chun, 1476
U-Dong, 11th Floor, Haeundae-Gu,
Busan, Seoul, 612–020, Republic of
South Korea; Order
On November 28, 2012, the thenDirector of the Office of Exporter
Services, Bernard Kritzer entered an
Order 1 denying Kue Sang Chun
(‘‘Chun’’) all U.S. export privileges until
November 10, 2016, pursuant to Section
1 77
FR 72322 (Dec. 5, 2013).
VerDate Mar<15>2010
19:00 Jun 30, 2014
Jkt 232001
11(h) of the Export Administration Act 2
and Section 766.25 of the Export
Administration Regulations,3 and based
on a criminal conviction of violating
Section 38 of the Arms Export Control
Act (22 U.S.C. 2778 (2000)) (‘‘AECA’’).
Whereas, the November 28, 2012
Order identified Chun’s addresses as
‘‘currently incarcerated at: Register
Number 56727–060, FCI Loretto,
Federal Correctional Institution, P.O.
Box 1000, Loretto, PA 15940,’’ and ‘‘578
Treeside Lane, Avon Lake, OH 44012;’’
Whereas, the Office of Export
Enforcement, Bureau of Industry and
Security, U.S. Department of Commerce
(‘‘Department’’), has confirmed that
these two addresses are no longer
correct, and that Chun’s current address
is ‘‘1476 U-Dong, 11 Floor, HaeundaeGu, Busan, Seoul, 612–020, Republic of
South Korea;’’ and
Whereas, as a result of the
information the Department obtained
regarding Chun’s current address, the
Department has requested that an order
be issued amending the November 28,
2012 Order to reflect that new address
for Chun;
Accordingly, it is hereby ordered that
the November 28, 2012 Order denying
all U.S. export privileges to Kue Sang
Chun is amended by deleting the
addresses ‘‘currently incarcerated at:
Register Number 56727–060, FCI
Loretto, Federal Correctional Institution,
P.O. Box 1000, Loretto, PA 15940,’’ and
‘‘578 Treeside Lane, Avon Lake, OH
44012’’, and by adding the address
‘‘1476 U-Dong, 11 Floor, Haeundae-Gu,
Busan, Seoul, 612–020, Republic of
South Korea’’. In all other aspects, the
November 28, 2012 Order remains in
full force and effect.
This Order, which is effective
immediately, shall be published in the
Federal Register.
BILLING CODE P
2 50
U.S.C. app. 2401–2420 (2000). Since August
21, 2001, the Act has been in lapse and the
President, through Executive Order 13222 of August
17, 2001 (3 CFR, 2001 Comp. 783 (2002)), as
extended most recently by the Notice of August 8,
2013 (78 FR 49107 (Aug. 12, 2013)), has continued
the Regulations in effect under the International
Emergency Economic Powers Act (50 U.S.C. 1701,
et seq. (2006 & Supp. IV 2010)).
3 The Regulations are currently codified in the
Code of Federal Regulations at 15 CFR parts 730
through 774 (2014).
PO 00000
Frm 00012
Fmt 4703
Sfmt 4703
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
In the Matter of: Fidel Ignacio
Cisneros, Inmate #—54544–037, FCI
Englewood, Federal Correctional
Institution, 9595 West Quincy Avenue,
Littleton, CO 80123; Order Denying
Export Privileges
On November 2, 2012, in the U.S.
District Court, Middle District of
Florida, Orlando Division, Fidel Ignacio
Cisneros (‘‘Cisneros’’), was convicted of
violating Section 38 of the Arms Export
Control Act (22 U.S.C. 2778 (2012))
(‘‘AECA’’). Specifically, Cisneros
knowingly and willfully exported and
caused to be exported from the United
States to Japan an Acquired Tactical
Illuminating Laser Aimer, which was a
defense article on the United States
Munitions List, without having first
obtained from the Department of State a
license for such export or written
authorization for such export. Cisneros
was sentenced to 46 months of
imprisonment and two years of
supervised release, and fined a $100
assessment. Cisneros is also listed on
the U.S. Department of State Debarred
List.
Section 766.25 of the Export
Administration Regulations (‘‘EAR’’ or
‘‘Regulations’’) 1 provides, in pertinent
part, that ‘‘[t]he Director of the Office of
Exporter Services, in consultation with
the Director of the Office of Export
Enforcement, may deny the export
privileges of any person who has been
convicted of a violation of the Export
Administration Act (‘‘EAA’’), the EAR,
or any order, license or authorization
issued thereunder; any regulation,
license, or order issued under the
International Emergency Economic
Powers Act (50 U.S.C. 1701–1706); 18
U.S.C. 793, 794 or 798; section 4(b) of
the Internal Security Act of 1950 (50
U.S.C. 783(b)), or section 38 of the Arms
Export Control Act (22 U.S.C. 2778).’’ 15
CFR 766.25(a); see also Section 11(h) of
the EAA, 50 U.S.C. app. 2410(h). The
denial of export privileges under this
provision may be for a period of up to
10 years from the date of the conviction.
1 The Regulations are currently codified in the
Code of Federal Regulations at 15 CFR parts 730
through 774 (2014). The Regulations issued
pursuant to the Export Administration Act (50
U.S.C. app. 2401–2420 (2000)) (‘‘EAA’’). Since
August 21, 2001, the EAA has been in lapse and the
President, through Executive Order 13222 of August
17, 2001 (3 CFR, 2001 Comp. 783 (2002)), which
has been extended by successive Presidential
Notices, the most recent being that of August 8,
2013 (78 FR 49107 (August 12, 2013)), has
continued the Regulations in effect under the
International Emergency Economic Powers Act (50
U.S.C. 1701, et seq. (2006 & Supp. IV 2010)).
E:\FR\FM\01JYN1.SGM
01JYN1
]]>Agencies
[Federal Register Volume 79, Number 126 (Tuesday, July 1, 2014)]
[Notices]
[Pages 37281-37282]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-15425]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-45-2014]
Foreign-Trade Zone (FTZ) 158--Vicksburg/Jackson, Mississippi,
Notification of Proposed Production Activity, Southern Motion, Inc.,
(Upholstered Furniture), Pontotoc and Baldwyn, Mississippi
The Greater Mississippi Foreign-Trade Zone, Inc., grantee of FTZ
158, submitted a notification of proposed production activity on behalf
of Southern Motion, Inc. (SMI), located in Pontotoc and Baldwyn,
Mississippi. The notification conforming to the requirements of the
regulations of the FTZ Board (15 CFR 400.22) was received on June 20,
2014.
A separate application for subzone designation at the SMI
facilities was submitted and will be processed under Section 400.31 of
the FTZ Board's regulations. The facilities are used to manufacture and
distribute upholstered furniture as well as cut-and-sewn upholstery
covering sets. The proposal indicates that SMI seeks to utilize
foreign-origin ``micro-denier suede'' fabric finished with a hot
caustic soda solution that would be transformed into furniture
upholstery covering sets under FTZ procedures. The finished upholstery
covering sets would then be assembled into finished chairs, seats,
sofas, loveseats, and sectionals manufactured at the SMI facilities in
Mississippi. All foreign upholstery fabric other than micro-denier
suede fabric used in SMI's production within FTZ 158 would be admitted
to the proposed subzone in domestic (duty-paid) status (19 CFR 146.43),
thereby precluding FTZ-related duty savings on such fabrics.
Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the
specific foreign-status materials and components and specific finished
products described in the submitted notification (as described below)
and subsequently authorized by the FTZ Board.
[[Page 37282]]
Production under FTZ procedures could exempt SMI from customs duty
payments on the foreign micro-denier suede upholstery fabric used in
export production. On its domestic sales, SMI would be able to apply
the finished upholstery cover set (i.e., furniture part) or finished
furniture duty rate (free) for the micro-denier suede upholstery fabric
described below. Customs duties also could possibly be deferred or
reduced on foreign status production equipment.
The proposed scope of authority under FTZ procedures would only
involve micro-denier suede upholstery fabrics finished with a hot
caustic soda solution process (the applicant indicates such fabric is
not produced by U.S. mills), as detailed in the notification (duty rate
ranges from 2.7 to 17.2%). All other material inputs used in the
production activity would be in domestic status.
Public comment is invited from interested parties. Submissions
shall be addressed to the FTZ Board's Executive Secretary at the
address below. The closing period for their receipt is August 11, 2014.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.
FOR FURTHER INFORMATION CONTACT: Pierre Duy at Pierre.Duy@trade.gov, or
(202) 482-1378.
Dated: June 25, 2014.
Elizabeth Whiteman,
Acting Executive Secretary.
[FR Doc. 2014-15425 Filed 6-30-14; 8:45 am]
BILLING CODE 3510-DS-P
