Foreign-Trade Zone (FTZ) 244-Riverside County, California, Notification of Proposed Production Activity, ModusLink Global Solutions, (Camera and Accessories Kitting), Riverside, California, 32532 [2014-13086]

Download as PDF 32532 Federal Register / Vol. 79, No. 108 / Thursday, June 5, 2014 / Notices notification of proposed production activity to the FTZ Board on behalf of ModusLink Global Solutions (ModusLink) located in Riverside, California. The notification conforming to the requirements of the regulations of MA–10000(L)—(Long Form) 48,000 the FTZ Board (15 CFR 400.22) was MA–10000(S)—(Short Form) 3,000 received on May 21, 2014. The ModusLink facility is located Total ............................... 51,000 within Site 5 of FTZ 244. The facility is used for the kitting of cameras and Estimated Time per Response: accessories into retail packages on behalf of GoPro, Inc. Pursuant to 15 CFR MA–10000(L)—(Long Form). 4.0 hrs MA–10000(S)—(Short Form). 1.4 hrs 400.14(b), FTZ activity would be limited to the specific foreign-status materials and components and specific finished Estimated Total Annual Burden products described in the submitted Hours: 196,200. notification (as described below) and Estimated Total Annual Cost to subsequently authorized by the FTZ Public: $0. Board. Respondents Obligation: Mandatory. Production under FTZ procedures Legal Authority: Title 13, United States Code, Sections 182, 224, and 225. could exempt ModusLink from customs duty payments on the foreign status IV. Request for Comments components used in export production. Comments are invited on: (a) Whether On its domestic sales, ModusLink the proposed collection of information would be able to choose the duty rates is necessary for the proper performance during customs entry procedures that of the functions of the agency, including apply to protective lens covers, camera whether the information shall have bundles, and lens replacement kits practical utility; (b) the accuracy of the (duty rates range from 2.0 to 5.3%) for agency’s estimate of the burden the foreign status inputs noted below. (including hours and cost) of the Customs duties also could possibly be proposed collection of information; (c) deferred or reduced on foreign status ways to enhance the quality, utility, and production equipment. The components and materials clarity of the information to be sourced from abroad include: 1 inch collected; and (d) ways to minimize the diameter clear plastic adhesive; double burden of the collection of information adhesive foam cushions; display boxes; on respondents, including through the plastic bags; plastic water housing use of automated collection techniques assemblies; rubber seals for water or other forms of information housing door; molded plastic technology. Comments submitted in response to replacement camera housings; accessory this notice will be summarized and/or boxes; tray tops for packaging; accessory included in the request for OMB boxes with shelf; warranty cards; approval of this information collection; printed carnets; security tethers; they also will become a matter of public washers; Wi-Fi remotes (including with record. key ring); metal mounting adapters (micro SD to USB 2.0); battery Dated: May 30, 2014. transmitters; rechargeable batteries; WiGlenna Mickelson, Fi transmitters; remotes; cameras; LCD Management Analyst, Office of the Chief transmitters; cables (composite, 120 pin Information Officer. mini USB to CVBS audio/video and [FR Doc. 2014–13010 Filed 6–4–14; 8:45 am] micro HDMI to HDMI); silicon dioxide BILLING CODE 3510–07–P for anti-fog inserts; flat and curved adhesive mounts; rubber floats for cameras; textile bag packs; stickers/ DEPARTMENT OF COMMERCE labels; textile chest mount harnesses; Wi-Fi remote key ring attachments; Foreign-Trade Zones Board thumbscrew wrench/bottle openers; [B–41–2014] rechargeable batteries; Wi-Fi transmitters–English/French; video Foreign-Trade Zone (FTZ) 244— players; micro SD memory cards; radar Riverside County, California, transmitters; composite cable bundles; Notification of Proposed Production microphone stand mounts; lens filters; Activity, ModusLink Global Solutions, 3D glasses; and 24 inch metal camera (Camera and Accessories Kitting), bars (duty rates range from duty-free to Riverside, California 20%). The request indicates that inputs The March Joint Powers Authority, included in certain textile categories grantee of FTZ 244, submitted a (classified within HTSUS Subheadings rmajette on DSK2TPTVN1PROD with NOTICES Affected Public: Business or other for profit, non-profit institutions, small businesses or organizations, and State or Local Governments. Estimated Number of Respondents: VerDate Mar<15>2010 14:59 Jun 04, 2014 Jkt 232001 PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 4202.92 and 6307.90) will be admitted to the zone in privileged foreign status (19 CFR 146.41), thereby precluding inverted tariff benefits on such items. Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary at the address below. The closing period for their receipt is July 15, 2014. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the FTZ Board’s Web site, which is accessible via www.trade.gov/ftz. FOR FURTHER INFORMATION CONTACT: Diane.Finver@trade.gov or (202) 482– 1367. Dated: May 30, 2014. Andrew McGilvray, Executive Secretary. [FR Doc. 2014–13086 Filed 6–4–14; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–42–2014] Foreign-Trade Zone (FTZ) 183—Austin, Texas, Notification of Proposed Production Activity, Flextronics America, LLC, (Automated Data Processing Machines), Austin, Texas Flextronics America, LLC (Flextronics) submitted a notification of proposed production activity to the FTZ Board for its facility in Austin, Texas within Subzone 183C. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on May 29, 2014. Flextronics already has authority to produce automated data processing machines within Subzone 183C. The current request would add a finished product as well as foreign status materials/components to the scope of authority. Pursuant to 15 CFR 400.14(b), additional FTZ authority would be limited to the specific foreign-status materials/components and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Flextronics from customs duty payments on the foreign status materials/components used in export production. On its domestic sales, E:\FR\FM\05JNN1.SGM 05JNN1

Agencies

[Federal Register Volume 79, Number 108 (Thursday, June 5, 2014)]
[Notices]
[Page 32532]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-13086]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-41-2014]


Foreign-Trade Zone (FTZ) 244--Riverside County, California, 
Notification of Proposed Production Activity, ModusLink Global 
Solutions, (Camera and Accessories Kitting), Riverside, California

    The March Joint Powers Authority, grantee of FTZ 244, submitted a 
notification of proposed production activity to the FTZ Board on behalf 
of ModusLink Global Solutions (ModusLink) located in Riverside, 
California. The notification conforming to the requirements of the 
regulations of the FTZ Board (15 CFR 400.22) was received on May 21, 
2014.
    The ModusLink facility is located within Site 5 of FTZ 244. The 
facility is used for the kitting of cameras and accessories into retail 
packages on behalf of GoPro, Inc. Pursuant to 15 CFR 400.14(b), FTZ 
activity would be limited to the specific foreign-status materials and 
components and specific finished products described in the submitted 
notification (as described below) and subsequently authorized by the 
FTZ Board.
    Production under FTZ procedures could exempt ModusLink from customs 
duty payments on the foreign status components used in export 
production. On its domestic sales, ModusLink would be able to choose 
the duty rates during customs entry procedures that apply to protective 
lens covers, camera bundles, and lens replacement kits (duty rates 
range from 2.0 to 5.3%) for the foreign status inputs noted below. 
Customs duties also could possibly be deferred or reduced on foreign 
status production equipment.
    The components and materials sourced from abroad include: 1 inch 
diameter clear plastic adhesive; double adhesive foam cushions; display 
boxes; plastic bags; plastic water housing assemblies; rubber seals for 
water housing door; molded plastic replacement camera housings; 
accessory boxes; tray tops for packaging; accessory boxes with shelf; 
warranty cards; printed carnets; security tethers; washers; Wi-Fi 
remotes (including with key ring); metal mounting adapters (micro SD to 
USB 2.0); battery transmitters; rechargeable batteries; Wi-Fi 
transmitters; remotes; cameras; LCD transmitters; cables (composite, 
120 pin mini USB to CVBS audio/video and micro HDMI to HDMI); silicon 
dioxide for anti-fog inserts; flat and curved adhesive mounts; rubber 
floats for cameras; textile bag packs; stickers/labels; textile chest 
mount harnesses; Wi-Fi remote key ring attachments; thumbscrew wrench/
bottle openers; rechargeable batteries; Wi-Fi transmitters-English/
French; video players; micro SD memory cards; radar transmitters; 
composite cable bundles; microphone stand mounts; lens filters; 3D 
glasses; and 24 inch metal camera bars (duty rates range from duty-free 
to 20%). The request indicates that inputs included in certain textile 
categories (classified within HTSUS Subheadings 4202.92 and 6307.90) 
will be admitted to the zone in privileged foreign status (19 CFR 
146.41), thereby precluding inverted tariff benefits on such items.
    Public comment is invited from interested parties. Submissions 
shall be addressed to the FTZ Board's Executive Secretary at the 
address below. The closing period for their receipt is July 15, 2014.
    A copy of the notification will be available for public inspection 
at the Office of the Executive Secretary, Foreign-Trade Zones Board, 
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., 
Washington, DC 20230-0002, and in the ``Reading Room'' section of the 
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.

FOR FURTHER INFORMATION CONTACT: Diane.Finver@trade.gov or (202) 482-
1367.

    Dated: May 30, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014-13086 Filed 6-4-14; 8:45 am]
BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.