Foreign-Trade Zone 265-Conroe, Texas, Revision to Production Authority, Bauer Manufacturing Inc., (Pile Drivers, Boring Machinery, and Foundation Construction Equipment), Conroe, Texas, 27860 [2014-11237]
Download as PDF
<![CDATA[
27860
Federal Register / Vol. 79, No. 94 / Thursday, May 15, 2014 / Notices
information collection should be sent
within 30 days of publication of this
notice to OIRA_Submission@
omb.eop.gov or faxed to (202) 395–5806.
DEPARTMENT OF COMMERCE
TKELLEY on DSK3SPTVN1PROD with NOTICES
Submission for OMB Review;
Comment Request
The Department of Commerce will
submit to the Office of Management and
Budget (OMB) for clearance the
following proposal for collection of
information under the provisions of the
Paperwork Reduction Act (44 U.S.C.
Chapter 35).
Agency: National Oceanic and
Atmospheric Administration (NOAA).
Title: NOAA Fisheries Greater
Atlantic Region Gear Identification
Requirements.
OMB Control Number: 0648–0351.
Form Number(s): NA.
Type of Request: Regular submission
(extension of a current information
collection).
Number of Respondents: 6,116.
Average Hours per Response: 1
minute.
Burden Hours: 21,156.
Needs and Uses: This request is
extension of this information collection.
Regulations at 50 CFR 648.84(a), (b),
and (d), 648.123(b)(3), 648.144(b)(1),
648.264(a)(5), and 697.21(a) and (b)
require that Federal fishing permit
holders using certain types of fishing
gear mark the gear with specified
information. The gear marking
requirements provide vessel and gear
identification information (e.g., hull
identification number, Federal fishing
permit number, etc.). The regulations
also specify how the gear is to be
marked for the purposes of visibility
(e.g., buoys, radar reflectors, etc.).
The quantity of gear in the case of
longline, pots, and traps is not the
number of hooks, pots, or traps, but
rather the number of attached end lines
associated with each string of hooks,
pots, or traps. As such, a single Federal
permit holder may be responsible for
marking several strings of a given gear
type, or may use multiple different gear
types that require marking. These gear
marking requirements aid in fishery law
enforcement, make the gear more visible
to other vessels to aid in navigation, and
provide other fishermen with
information regarding the gear type
being used to help prevent gear
conflicts.
Affected Public: Business or other forprofit organizations.
Frequency: Annually.
Respondent’s Obligation: Mandatory.
This information collection request
may be viewed at reginfo.gov. Follow
the instructions to view Department of
Commerce collections currently under
review by OMB.
Written comments and
recommendations for the proposed
VerDate Mar<15>2010
18:18 May 14, 2014
Jkt 232001
Dated: May 9, 2014.
Gwellnar Banks,
Management Analyst, Office of the Chief
Information Officer.
[FR Doc. 2014–11165 Filed 5–14–14; 8:45 am]
BILLING CODE 3510–22–P
meet in open session on Wednesday,
June 11, from 8:15 a.m. to 4:00 p.m.
Eastern Time. The VCAT is composed of
fifteen members appointed by the NIST
Director who are eminent in such fields
as business, research, new product
development, engineering, labor,
education, management consulting,
environment, and international
relations.
The VCAT will meet on
Wednesday, June 11, 2014, from 8:15
a.m. to 4:00 p.m. Eastern Time.
ADDRESSES: The meeting will be held in
the Portrait Room, Administration
Building, at NIST, 100 Bureau Drive,
Gaithersburg, Maryland 20899. Please
note admittance instructions under the
SUPPLEMENTARY INFORMATION section of
this notice.
FOR FURTHER INFORMATION CONTACT:
Stephanie Shaw, VCAT, NIST, 100
Bureau Drive, Mail Stop 1060,
Gaithersburg, Maryland 20899–1060,
telephone number 301–975–2667. Ms.
Shaw’s email address is
stephanie.shaw@nist.gov.
SUPPLEMENTARY INFORMATION:
DATES:
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–8–2014]
Foreign-Trade Zone 265—Conroe,
Texas, Revision to Production
Authority, Bauer Manufacturing Inc.,
(Pile Drivers, Boring Machinery, and
Foundation Construction Equipment),
Conroe, Texas
On January 9, 2014, the City of
Conroe, Texas, grantee of FTZ 265,
submitted a notification of proposed
revision to existing production authority
to the Foreign-Trade Zones (FTZ) Board
on behalf of Bauer Manufacturing Inc.,
within FTZ 265—Site 1, in Conroe,
Texas.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400), including
notice in the Federal Register inviting
public comment (79 FR 8156, 2–11–
2014). The FTZ Board has determined
that no further review of the proposed
revision to the scope of production
authority is warranted at this time. The
proposed revision described in the
notification is authorized, subject to the
FTZ Act and the FTZ Board’s
regulations, including Section 400.14.
Dated: May 9, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014–11237 Filed 5–14–14; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
National Institute of Standards and
Technology
Visiting Committee on Advanced
Technology
National Institute of Standards
and Technology, Department of
Commerce.
ACTION: Notice of Public Meeting.
AGENCY:
The Visiting Committee on
Advanced Technology (VCAT or
Committee), National Institute of
Standards and Technology (NIST), will
SUMMARY:
PO 00000
Frm 00024
Fmt 4703
Sfmt 4703
Authority: 15 U.S.C. 278 and the Federal
Advisory Committee Act, as amended, 5
U.S.C. App.
The purpose of this meeting is for the
VCAT to review and make
recommendations regarding general
policy for NIST, its organization, its
budget, and its programs within the
framework of applicable national
policies as set forth by the President and
the Congress. The agenda will include
an update on NIST and presentations
and discussions on safety at NIST,
NIST’s activities related to the Hollings
Manufacturing Extension Partnership
Program, and NIST’s disaster resilience
capabilities and authorities. Other
topics include the transition of NIST
leadership and the future focus of the
VCAT. The VCAT Subcommittee on
Cybersecurity will present its progress
on the review of NIST cryptographic
standards and guidelines development
process and its path forward. The
agenda may change to accommodate
Committee business. The final agenda
will be posted on the NIST Web site at
https://www.nist.gov/director/vcat/
agenda.cfm.
Individuals and representatives of
organizations who would like to offer
comments and suggestions related to the
Committee’s affairs are invited to
request a place on the agenda. On
Wednesday, June 11, approximately
one-half hour in the afternoon will be
reserved for public comments and
speaking times will be assigned on a
first-come, first-serve basis. The amount
E:\FR\FM\15MYN1.SGM
15MYN1
]]>Agencies
[Federal Register Volume 79, Number 94 (Thursday, May 15, 2014)]
[Notices]
[Page 27860]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-11237]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-8-2014]
Foreign-Trade Zone 265--Conroe, Texas, Revision to Production
Authority, Bauer Manufacturing Inc., (Pile Drivers, Boring Machinery,
and Foundation Construction Equipment), Conroe, Texas
On January 9, 2014, the City of Conroe, Texas, grantee of FTZ 265,
submitted a notification of proposed revision to existing production
authority to the Foreign-Trade Zones (FTZ) Board on behalf of Bauer
Manufacturing Inc., within FTZ 265--Site 1, in Conroe, Texas.
The notification was processed in accordance with the regulations
of the FTZ Board (15 CFR part 400), including notice in the Federal
Register inviting public comment (79 FR 8156, 2-11-2014). The FTZ Board
has determined that no further review of the proposed revision to the
scope of production authority is warranted at this time. The proposed
revision described in the notification is authorized, subject to the
FTZ Act and the FTZ Board's regulations, including Section 400.14.
Dated: May 9, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014-11237 Filed 5-14-14; 8:45 am]
BILLING CODE 3510-DS-P
