Agency Information Collection Activities; Proposed Extension of Approval of Information Collection; Comment Request-Safety Standard for Bicycle Helmets, 26416-26417 [2014-10488]

Download as PDF emcdonald on DSK67QTVN1PROD with NOTICES 26416 Federal Register / Vol. 79, No. 89 / Thursday, May 8, 2014 / Notices financial.6 Additionally, the composition of the FirstNet Board must satisfy the other requirements specified in the Act, including that: (i) At least three Board members have served as public safety professionals; (ii) at least three members represent the collective interests of states, localities, tribes, and territories; and (iii) its members reflect geographic and regional, as well as rural and urban, representation.7 An individual Board member may satisfy more than one of these requirements. The current non-permanent FirstNet Board members are (noting length of term): • Samuel ‘‘Sam’’ Ginn (Chair), telecommunications executive (retired) (Term expires: August 2014) • Susan Swenson (Vice Chair), telecommunications/technology executive (Term expires: August 2016) • Barry Boniface, private equity investor and telecommunications executive (Term expires: August 2016) • Tim Bryan, CEO, National Rural Telecommunications Cooperative (Term expires: August 2015) • Charles ‘‘Chuck’’ Dowd, Assistant Chief, New York City Police Department (Term expires: August 2014) • F. Craig Farrill, wireless telecommunications executive (Term expires: August 2015) • Paul Fitzgerald, Sheriff, Story County, Iowa (Term expires: August 2014) • Jeffrey Johnson, Fire Chief (retired); former Chair, State Interoperability Council, State of Oregon; CEO, Western Fire Chiefs Association (Term expires: August 2016) • Kevin McGinnis, Chief/CEO, North East Mobile Health Services (Term expires: August 2015) • Ed Reynolds, telecommunications executive (retired) (Term expires: August 2014) • Teri Takai, government information technology expert; former CIO, States of Michigan and California (Term expires: August 2016) • Wellington Webb, Founder, Webb Group International; former Mayor, Denver, Colorado (Term expires: August 2015) More information about the FirstNet Board is available at www.firstnet.gov/ about/Board. Board members will be appointed for a term of three years, and Board members may not serve more than two consecutive full three-year terms. 6 47 7 47 U.S.C. 1424(b)(2)(B). U.S.C. 1424(b)(2)(A). VerDate Mar<15>2010 16:18 May 07, 2014 III. Compensation and Status as Government Employees FirstNet Board members are appointed as special government employees. FirstNet Board members are compensated at the daily rate of basic pay for level IV of the Executive Schedule (approximately $155,000 per year).8 Each Board member must be a United States citizen, cannot be a registered lobbyist, and cannot be a registered agent of, employed by, or receive payments from, a foreign government. IV. Financial Disclosure and Conflicts of Interest FirstNet Board members must comply with certain federal conflict of interest statutes and ethics regulations, including some financial disclosure requirements. A FirstNet Board member will generally be prohibited from participating on any particular matter that will have a direct and predictable effect on his or her personal financial interests or on the interests of the appointee’s spouse, minor children, or non-federal employer. V. Selection Process At the direction of the Secretary of Commerce, NTIA, in consultation with FirstNet, will conduct outreach to the public safety community, state and local organizations, and industry to solicit nominations for candidates to the Board who satisfy the statutory requirements for membership. In addition, by this Notice, the Secretary of Commerce, through NTIA, will accept expressions of interest until May 23, 2014 from any individual, or any organization that wishes to propose a candidate, who satisfies the statutory requirements for membership on the FirstNet Board. All parties wishing to be considered should submit their full name, address, telephone number, email address, a current resume, and a statement of qualifications that references the Act’s expertise, representational, and geographic requirements for FirstNet Board membership, as described in this Notice, along with a statement describing why they want to serve on the FirstNet Board and affirming their ability to take a regular and active role in the Board’s work. The Secretary of Commerce will select FirstNet Board candidates based on the eligibility requirements in the Act and recommendations submitted by NTIA, in consultation with the FirstNet Board’s Governance and Personnel Committee. NTIA will recommend candidates based on an assessment of 8 47 Jkt 232001 PO 00000 U.S.C. 1424(g). Frm 00015 Fmt 4703 Sfmt 4703 their qualifications as well as their demonstrated ability to work in a collaborative way to achieve the goals and objectives of FirstNet as set forth in the Act. Board candidates will be vetted through the Department of Commerce and may be subject to an appropriate background check for security clearance. Dated: May 2, 2014. Lawrence E. Strickling, Assistant Secretary for Communications and Information. [FR Doc. 2014–10562 Filed 5–7–14; 8:45 am] BILLING CODE 3510–60–P CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC–2010–0056] Agency Information Collection Activities; Proposed Extension of Approval of Information Collection; Comment Request—Safety Standard for Bicycle Helmets Consumer Product Safety Commission. ACTION: Notice. AGENCY: In accordance with the requirements of the Paperwork Reduction Act (PRA) of 1995 (44 U.S.C. chapter 35), the Consumer Product Safety Commission (Commission or CPSC) invites comments on a proposed request for extension of approval of a collection of information relating to the Safety Standard for Bicycle Helmets (OMB No. 3041–0127). The Commission will consider all comments received in response to this notice before requesting an extension of approval of this collection of information from OMB. DATES: The Office of the Secretary must receive comments not later than July 7, 2014. ADDRESSES: You may submit comments, identified by Docket No. CPSC–2010– 0056, by any of the following methods: Electronic Submissions: Submit electronic comments to the Federal eRulemaking Portal at: https:// www.regulations.gov. Follow the instructions for submitting comments. The Commission does not accept comments submitted by electronic mail (email), except through www.regulations.gov. The Commission encourages you to submit electronic comments by using the Federal eRulemaking Portal, as described above. Written Submissions: Submit written submissions by mail/hand delivery/ courier to: Office of the Secretary, Consumer Product Safety Commission, Room 820, 4330 East West Highway, SUMMARY: E:\FR\FM\08MYN1.SGM 08MYN1 Federal Register / Vol. 79, No. 89 / Thursday, May 8, 2014 / Notices Bethesda, MD 20814; telephone (301) 504–7923. Instructions: All submissions received must include the agency name and docket number for this notice. All comments received may be posted without change, including any personal identifiers, contact information, or other personal information provided, to: https://www.regulations.gov. Do not submit confidential business information, trade secret information, or other sensitive or protected information that you do not want to be available to the public. If furnished at all, such information should be submitted in writing. Docket: For access to the docket to read background documents or comments received, go to: https:// www.regulations.gov, and insert the docket number CPSC–2010–0056, into the ‘‘Search’’ box, and follow the prompts. For further information contact: Robert H. Squibb, Consumer Product Safety Commission, 4330 East West Highway, Bethesda, MD 20814; (301) 504–7815, or by email to: rsquibb@cpsc.gov. SUPPLEMENTARY INFORMATION: CPSC seeks to renew the following collection of information: Title: Safety Standard for Bicycle Helmets. OMB Number: 3041–0127. Type of Review: Renewal of collection. Frequency of Response: On occasion. Affected Public: Manufacturers and importers of bicycle helmets. Estimated Number of Respondents: 30 manufacturers and importers will maintain test records of an estimated 200 models total annually, including older models and new models. Testing on bicycle helmets must be conducted for each new production lot and the test records must be maintained for 3 years. Estimated Time per Response: 200 hours/model to test 40 models (including new prototypes) plus 4 hours for recordkeeping for 200 models annually. Total Estimated Annual Burden: 8,800 hours (8,000 hours for testing and 800 hours for recordkeeping). General Description of Collection: In 1998, the Commission issued a safety standard for bicycle helmets (16 CFR part 1203). The standard includes requirements for labeling and instructions. The standard also requires that manufacturers and importers of bicycle helmets subject to the standard issue certificates of compliance based on a reasonable testing program. Every person issuing certificates of emcdonald on DSK67QTVN1PROD with NOTICES FOR FURTHER INFORMATION CONTACT: VerDate Mar<15>2010 16:18 May 07, 2014 Jkt 232001 compliance must maintain certain records. Respondents must comply with the requirements in 16 CFR part 1203 for labeling and instructions, testing, certification, and recordkeeping. Request for Comments The Commission solicits written comments from all interested persons about the proposed collection of information. The Commission specifically solicits information relevant to the following topics: —Whether the collection of information described above is necessary for the proper performance of the Commission’s functions, including whether the information would have practical utility; —Whether the estimated burden of the proposed collection of information is accurate; —Whether the quality, utility, and clarity of the information to be collected could be enhanced; and —Whether the burden imposed by the collection of information could be minimized by use of automated, electronic or other technological collection techniques, or other forms of information technology. Dated: May 2, 2014. Todd A. Stevenson, Secretary, Consumer Product Safety Commission. [FR Doc. 2014–10488 Filed 5–7–14; 8:45 am] BILLING CODE 6355–01–P CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC–2010–0022] Agency Information Collection Activities; Proposed Collection; Comment Request; Safety Standard for Toddler Beds Consumer Product Safety Commission. ACTION: Notice. AGENCY: As required by the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35), the Consumer Product Safety Commission (CPSC or Commission) requests comments on a proposed extension of approval of a collection of information under the safety standard for toddler beds, approved previously under OMB Control No. 3041–0150. The Commission will consider all comments received in response to this notice, before requesting an extension of this collection of information from the Office of Management and Budget (OMB). SUMMARY: PO 00000 Frm 00016 Fmt 4703 Sfmt 4703 26417 Submit written or electronic comments on the collection of information by July 7, 2014. ADDRESSES: You may submit comments, identified by Docket No. CPSC–2010– 0022, by any of the following methods: Electronic Submissions: Submit electronic comments to the Federal eRulemaking Portal at: https:// www.regulations.gov. Follow the instructions for submitting comments. The Commission does not accept comments submitted by electronic mail (email), except through www.regulations.gov. The Commission encourages you to submit electronic comments by using the Federal eRulemaking Portal, as described above. Written Submissions: Submit written submissions in the following way: mail/ hand delivery/courier to: Office of the Secretary, Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814; telephone (301) 504–7923. Instructions: All submissions received must include the agency name and docket number for this notice. All comments received may be posted without change, including any personal identifiers, contact information, or other personal information provided, to: https://www.regulations.gov. Do not submit confidential business information, trade secret information, or other sensitive or protected information that you do not want to be available to the public. If furnished at all, such information should be submitted in writing. Docket: For access to the docket to read background documents or comments received, go to: https:// www.regulations.gov, and insert the docket number, CPSC–2010–0022, into the ‘‘Search’’ box, and follow the prompts. DATES: FOR FURTHER INFORMATION CONTACT: Robert H. Squibb, Consumer Product Safety Commission, 4330 East West Highway, Bethesda, MD 20814; (301) 504–7815, or by email to: rsquibb@ cpsc.gov. CPSC seeks to renew the following currently approved collection of information: Title: Safety Standard for Toddler Beds. OMB Number: 3041–0150. Type of Review: Renewal of collection. Frequency of Response: On occasion. Affected Public: Manufacturers and importers of toddler beds. Estimated Number of Respondents: 78 firms supply toddler beds with an estimated 10 models/firm annually. SUPPLEMENTARY INFORMATION: E:\FR\FM\08MYN1.SGM 08MYN1

Agencies

[Federal Register Volume 79, Number 89 (Thursday, May 8, 2014)]
[Notices]
[Pages 26416-26417]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-10488]


=======================================================================
-----------------------------------------------------------------------

CONSUMER PRODUCT SAFETY COMMISSION

[Docket No. CPSC-2010-0056]


Agency Information Collection Activities; Proposed Extension of 
Approval of Information Collection; Comment Request--Safety Standard 
for Bicycle Helmets

AGENCY: Consumer Product Safety Commission.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In accordance with the requirements of the Paperwork Reduction 
Act (PRA) of 1995 (44 U.S.C. chapter 35), the Consumer Product Safety 
Commission (Commission or CPSC) invites comments on a proposed request 
for extension of approval of a collection of information relating to 
the Safety Standard for Bicycle Helmets (OMB No. 3041-0127). The 
Commission will consider all comments received in response to this 
notice before requesting an extension of approval of this collection of 
information from OMB.

DATES: The Office of the Secretary must receive comments not later than 
July 7, 2014.

ADDRESSES: You may submit comments, identified by Docket No. CPSC-2010-
0056, by any of the following methods:
    Electronic Submissions: Submit electronic comments to the Federal 
eRulemaking Portal at: https://www.regulations.gov. Follow the 
instructions for submitting comments. The Commission does not accept 
comments submitted by electronic mail (email), except through 
www.regulations.gov. The Commission encourages you to submit electronic 
comments by using the Federal eRulemaking Portal, as described above.
    Written Submissions: Submit written submissions by mail/hand 
delivery/courier to: Office of the Secretary, Consumer Product Safety 
Commission, Room 820, 4330 East West Highway,

[[Page 26417]]

Bethesda, MD 20814; telephone (301) 504-7923.
    Instructions: All submissions received must include the agency name 
and docket number for this notice. All comments received may be posted 
without change, including any personal identifiers, contact 
information, or other personal information provided, to: https://www.regulations.gov. Do not submit confidential business information, 
trade secret information, or other sensitive or protected information 
that you do not want to be available to the public. If furnished at 
all, such information should be submitted in writing.
    Docket: For access to the docket to read background documents or 
comments received, go to: https://www.regulations.gov, and insert the 
docket number CPSC-2010-0056, into the ``Search'' box, and follow the 
prompts.

FOR FURTHER INFORMATION CONTACT: For further information contact: 
Robert H. Squibb, Consumer Product Safety Commission, 4330 East West 
Highway, Bethesda, MD 20814; (301) 504-7815, or by email to: 
rsquibb@cpsc.gov.

SUPPLEMENTARY INFORMATION: CPSC seeks to renew the following collection 
of information:
    Title: Safety Standard for Bicycle Helmets.
    OMB Number: 3041-0127.
    Type of Review: Renewal of collection.
    Frequency of Response: On occasion.
    Affected Public: Manufacturers and importers of bicycle helmets.
    Estimated Number of Respondents: 30 manufacturers and importers 
will maintain test records of an estimated 200 models total annually, 
including older models and new models. Testing on bicycle helmets must 
be conducted for each new production lot and the test records must be 
maintained for 3 years.
    Estimated Time per Response: 200 hours/model to test 40 models 
(including new prototypes) plus 4 hours for recordkeeping for 200 
models annually.
    Total Estimated Annual Burden: 8,800 hours (8,000 hours for testing 
and 800 hours for recordkeeping).
    General Description of Collection: In 1998, the Commission issued a 
safety standard for bicycle helmets (16 CFR part 1203). The standard 
includes requirements for labeling and instructions. The standard also 
requires that manufacturers and importers of bicycle helmets subject to 
the standard issue certificates of compliance based on a reasonable 
testing program. Every person issuing certificates of compliance must 
maintain certain records. Respondents must comply with the requirements 
in 16 CFR part 1203 for labeling and instructions, testing, 
certification, and recordkeeping.

Request for Comments

    The Commission solicits written comments from all interested 
persons about the proposed collection of information. The Commission 
specifically solicits information relevant to the following topics:

--Whether the collection of information described above is necessary 
for the proper performance of the Commission's functions, including 
whether the information would have practical utility;
--Whether the estimated burden of the proposed collection of 
information is accurate;
--Whether the quality, utility, and clarity of the information to be 
collected could be enhanced; and
--Whether the burden imposed by the collection of information could be 
minimized by use of automated, electronic or other technological 
collection techniques, or other forms of information technology.

    Dated: May 2, 2014.
Todd A. Stevenson,
Secretary, Consumer Product Safety Commission.
[FR Doc. 2014-10488 Filed 5-7-14; 8:45 am]
BILLING CODE 6355-01-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.