Airworthiness Directives; British Aerospace Regional Aircraft Airplanes, 22367-22369 [2014-08142]

Download as PDF Federal Register / Vol. 79, No. 77 / Tuesday, April 22, 2014 / Rules and Regulations (p) Other FAA AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, International Branch, ANM–116, Transport Airplane Directorate, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the International Branch, send it to ATTN: Dan Rodina, Aerospace Engineer, International Branch, ANM–116, Transport Airplane Directorate, FAA, 1601 Lind Avenue SW., Renton, WA 98057–3356; telephone 425–227–2125; fax 425–227–1149. Information may be emailed to: 9-ANM-116AMOC-REQUESTS@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office. The AMOC approval letter must specifically reference this AD. (2) Airworthy Product: For any requirement in this AD to obtain corrective actions from a manufacturer, use these actions if they are FAA-approved. Corrective actions are considered FAA-approved if they were approved by the State of Design Authority (or its delegated agent, or by the Design Approval Holder with a State of Design Authority’s design organization approval, as applicable). You are required to ensure the product is airworthy before it is returned to service. (q) Related Information (1) Refer to Mandatory Continuing Airworthiness Information (MCAI) European Aviation Safety Agency Airworthiness Directive 2012–0188, dated September 19, 2012, for related information. You may examine the MCAI in the AD docket on the Internet at https://www.regulations.gov/ #!documentDetail;D=FAA-2013-1072-0002. (2) Service information identified in this AD that is not incorporated by reference in this AD may be obtained at the addresses specified in paragraphs (r)(5) and (r)(6) of this AD. ehiers on DSK2VPTVN1PROD with RULES (r) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise. (3) The following service information was approved for IBR on May 27, 2014. (i) Airbus Service Bulletin A310–28–2148, Revision 07, dated February 13, 2012. (ii) Reserved. (4) The following service information was approved for IBR on May 15, 2012, (77 FR 21397, April 10, 2012). (i) Airbus Mandatory Service Bulletin A310–28–2148, Revision 05, dated August 3, 2010. VerDate Mar<15>2010 15:06 Apr 21, 2014 Jkt 232001 (ii) Airbus Mandatory Service Bulletin A310–28–2148, Revision 06, dated August 31, 2011. (5) For service information identified in this AD, contact Airbus SAS, Airworthiness Office—EAW, 1 Rond Point Maurice Bellonte, 31707 Blagnac Cedex, France; telephone +33 5 61 93 36 96; fax +33 5 61 93 44 51; email account.airworth-eas@ airbus.com; Internet https://www.airbus.com. (6) You may view this service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425–227–1221. (7) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: https:// www.archives.gov/federal-register/cfr/ibrlocations.html. 22367 [Docket No. FAA–2014–0042; Directorate Identifier 2013–CE–050–AD; Amendment 39–17823; AD 2014–07–09] of a certain publication listed in the AD as of May 27, 2014. ADDRESSES: You may examine the AD docket on the Internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2014– 0042; or in person at Document Management Facility, U.S. Department of Transportation, Docket Operations, M–30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC 20590. For service information identified in this AD, contact BAE Systems (Operations) Limited, Customer Information Department, Prestwick International Airport, Ayrshire, KA9 2RW, Scotland, United Kingdom; telephone: +44 1292 675207; fax: +44 1292 675704; email: RApublications@ baesystems.com; Internet: https:// www.baesystems.com/Businesses/ RegionalAircraft/. You may review this referenced service information at the FAA, Small Airplane Directorate, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at the FAA, call (816) 329– 4148. FOR FURTHER INFORMATION CONTACT: Taylor Martin, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329– 4138; fax: (816) 329–4090; email: taylor.martin@faa.gov. SUPPLEMENTARY INFORMATION: RIN 2120–AA64 Discussion Issued in Renton, Washington, on April 4, 2014. Jeffrey E. Duven, Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 2014–08597 Filed 4–21–14; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 Airworthiness Directives; British Aerospace Regional Aircraft Airplanes Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Final rule. AGENCY: We are adopting a new airworthiness directive (AD) for British Aerospace Regional Aircraft Jetstream Series 3101 and Jetstream Model 3201 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as inadequate instructions for inspection for corrosion on the rudder upper hinge bracket and certain internal wing and drainage paths. We are issuing this AD to require actions to address the unsafe condition on these products. DATES: This AD is effective May 27, 2014. The Director of the Federal Register approved the incorporation by reference SUMMARY: PO 00000 Frm 00011 Fmt 4700 Sfmt 4700 We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to British Aerospace Regional Aircraft Jetstream Series 3101 and Jetstream Model 3201 airplanes. The NPRM was published in the Federal Register on January 31, 2014 (79 FR 5323). The NPRM proposed to correct an unsafe condition for the specified products and was based on mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country. The MCAI states: Compliance with the inspections in the Corrosion Prevention and Control Programme (CPCP) has been identified as a mandatory action for continued airworthiness and UK CAA AD 003–04–94 was issued to require operators to comply with those inspection instructions. Since the issuance of that AD, reports have been received of finding extensive corrosion on the rudder upper hinge bracket. Although there is an existing zonal inspection of the area in the CPCP, it has been concluded that this is inadequate to identify the corrosion on this bracket and consequently, a new specific inspection of the rudder upper hinge bracket, E:\FR\FM\22APR1.SGM 22APR1 22368 Federal Register / Vol. 79, No. 77 / Tuesday, April 22, 2014 / Rules and Regulations task 200/EX/01 C2, has been added to the CPCP, currently at Revision 6. Failure of the rudder upper hinge bracket could lead to the onset of flutter and loss of control of the aeroplane. In addition, although the CPCP already included a wing internal inspection to check for corrosion and to verify that all drainage paths are clear, prompted by feedback from the fleet sampling programme, a new, more specific, inspection of wing stations 36, 51 and 83, together with a check of the drainage paths, has been introduced into the CPCP through task 3/400/IN/01 C2. Failure to comply with these instructions could result in an unsafe condition. For the reasons described above, this AD retains the requirements of UK CAA AD 003– 04–94, which is superseded, and requires the implementation of the new inspections. The MCAI can be found in the AD docket on the Internet at: https:// www.regulations.gov/ #!documentDetail;D=FAA-2014-00420002. Comments We gave the public the opportunity to participate in developing this AD. We received no comments on the NPRM (79 FR 5323, January 31, 2014) or on the determination of the cost to the public. ehiers on DSK2VPTVN1PROD with RULES Conclusion We reviewed the relevant data and determined that air safety and the public interest require adopting the AD as proposed except for minor editorial changes. We have determined that these minor changes: • Are consistent with the intent that was proposed in the NPRM (79 FR 5323, January 31, 2014) for correcting the unsafe condition; and • Do not add any additional burden upon the public than was already proposed in the NPRM (79 FR 5323, January 31, 2014). Costs of Compliance We estimate that this AD will affect 66 products of U.S. registry. We also estimate that it would take about 100 work-hours per product to comply with the basic requirements of this AD. The average labor rate is $85 per work-hour. Based on these figures, we estimate the cost of the AD on U.S. operators to be $561,000, or $8,500 per product. The scope of damage found in the required inspection could vary significantly from airplane to airplane. We have no way of determining how much damage may be found on each airplane or the cost to repair damaged parts on each airplane or the number of airplanes that may require repair. Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue VerDate Mar<15>2010 15:06 Apr 21, 2014 Jkt 232001 rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. ‘‘Subtitle VII: Aviation Programs,’’ describes in more detail the scope of the Agency’s authority. We are issuing this rulemaking under the authority described in ‘‘Subtitle VII, Part A, Subpart III, Section 44701: General requirements.’’ Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings We determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify this AD: (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866, (2) Is not a ‘‘significant rule’’ under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation in Alaska, and (4) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. Examining the AD Docket You may examine the AD docket on the Internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2014– 0042; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains the NPRM, the regulatory evaluation, any comments received, and other information. The street address for the Docket Office (telephone (800) 647– 5527) is in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. PO 00000 Frm 00012 Fmt 4700 Sfmt 4700 Adoption of the Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows: PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new AD: ■ 2014–07–09 British Aerospace Regional Aircraft: Amendment 39–17823; Docket No. FAA–2014–0042; Directorate Identifier 2013–CE–050–AD. (a) Effective Date This airworthiness directive (AD) becomes effective May 27, 2014. (b) Affected ADs None. (c) Applicability This AD applies to British Aerospace Regional Aircraft Jetstream Series 3101 and Model 3201 airplanes, all serial numbers, certificated in any category. (d) Subject Air Transport Association of America (ATA) Code 5: Time Limits. (e) Reason This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as inadequate instructions for inspection for corrosion on the rudder upper hinge bracket and certain internal wing stations and drainage paths. We are issuing this AD to prevent, detect, and correct corrosion on the rudder upper hinge bracket and internal wing, which could lead to reduced structural integrity of the airplane with consequent loss of control. (f) Actions and Compliance Comply with this AD within the compliance times specified in paragraphs (f)(1) through (f)(4) of this AD, including all subparagraphs, unless already done: (1) After May 27, 2014 (the effective date of this AD), except as required by paragraph (f)(2) of this AD, within the thresholds and intervals specified, incorporate into the FAAapproved maintenance program BAE Systems (Operations) Limited Jetstream Series 3100 & 3200 Corrosion Prevention and Control Programme, Manual Ref. JS/CPCP/01, Revision 6, dated November 15, 2010, in its entirety. (2) Within 2 years after May 27, 2014 (the effective date of this AD), do the initial inspections specified in tasks 200/EX/01 C2 and 3/400/IN/01 C2 in BAE Systems (Operations) Limited Jetstream Series 3100 & E:\FR\FM\22APR1.SGM 22APR1 Federal Register / Vol. 79, No. 77 / Tuesday, April 22, 2014 / Rules and Regulations ehiers on DSK2VPTVN1PROD with RULES 3200 Corrosion Prevention and Control Programme, Manual Ref. JS/CPCP/01, Revision 6, dated November 15, 2010. (3) If any discrepancy, particularly corrosion, is found during any inspections or tasks required by paragraphs (f)(1) and (f)(2) of this AD, within the compliance time specified, repair or replace, as applicable, all damaged structural parts and components and do the maintenance procedures for corrective action following BAE Systems (Operations) Limited Jetstream Series 3100 & 3200 Corrosion Prevention and Control Programme, Manual Ref. JS/CPCP/01, Revision 6, dated November 15, 2010. If no compliance time is defined, do the applicable corrective action before further flight. (4) You may comply with the requirements of paragraphs (f)(1) and (f)(2) of this AD by incorporating BAE Systems (Operations) Limited Jetstream Series 3100 & 3200 Corrosion Prevention and Control Programme, Manual Ref. JS/CPCP/01, Revision 6, dated November 15, 2010, into your maintenance program (instructions for continued airworthiness) and complying with that program. (g) Other FAA AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, Standards Office, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Taylor Martin, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329–4138; fax: (816) 329– 4090; email: taylor.martin@faa.gov. Before using any approved AMOC on any airplane to which the AMOC applies, notify your appropriate principal inspector (PI) in the FAA Flight Standards District Office (FSDO), or lacking a PI, your local FSDO. (2) Airworthy Product: For any requirement in this AD to obtain corrective actions from a manufacturer or other source, use these actions if they are FAA-approved. Corrective actions are considered FAA-approved if they are approved by the State of Design Authority (or their delegated agent). You are required to assure the product is airworthy before it is returned to service. (3) Reporting Requirements: For any reporting requirement in this AD, a federal agency may not conduct or sponsor, and a person is not required to respond to, nor shall a person be subject to a penalty for failure to comply with a collection of information subject to the requirements of the Paperwork Reduction Act unless that collection of information displays a current valid OMB Control Number. The OMB Control Number for this information collection is 2120–0056. Public reporting for this collection of information is estimated to be approximately 5 minutes per response, including the time for reviewing instructions, completing and reviewing the collection of information. All responses to this collection of information are mandatory. Comments concerning the accuracy of this burden and suggestions for reducing the burden should be directed to the FAA at: 800 Independence VerDate Mar<15>2010 15:06 Apr 21, 2014 Jkt 232001 22369 Ave. SW., Washington, DC 20591, Attn: Information Collection Clearance Officer, AES–200. DEPARTMENT OF TRANSPORTATION (h) Related Information 14 CFR Part 39 MCAI European Aviation Safety Agency (EASA) AD No.: 2012–0036, dated March 12, 2012, for related information. The MCAI can be found in the AD docket on the Internet at: https://www.regulations.gov/ #!documentDetail;D=FAA-2014-0042-0002. (i) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this service information as applicable to do the actions required by this AD, unless the AD specifies otherwise. (i) BAE Systems (Operations) Limited Jetstream Series 3100 & 3200 Corrosion Prevention and Control Programme, Manual Ref: JS/CPCP/01, Revision 6, dated November 15, 2010. (ii) Reserved. (3) For British Aerospace Regional Aircraft service information identified in this AD, contact BAE Systems (Operations) Limited, Customer Information Department, Prestwick International Airport, Ayrshire, KA9 2RW, Scotland, United Kingdom; telephone: +44 1292 675207; fax: +44 1292 675704; email: RApublications@baesystems.com; Internet: https://www.baesystems.com/Businesses/ RegionalAircraft/. (4) You may view this service information at the FAA, Small Airplane Directorate, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at the FAA, call (816) 329–4148. (5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: https:// www.archives.gov/federal-register/cfr/ibrlocations.html. Issued in Kansas City, Missouri, on April 4, 2014. Earl Lawrence, Manager, Small Airplane Directorate, Aircraft Certification Service. [FR Doc. 2014–08142 Filed 4–21–14; 8:45 am] BILLING CODE 4910–13–P PO 00000 Frm 00013 Fmt 4700 Sfmt 4700 Federal Aviation Administration [Docket No. FAA–2014–0018; Directorate Identifier 2013–CE–049–AD; Amendment 39–17822; AD 2014–07–08] RIN 2120–AA64 Airworthiness Directives; Centrair Gliders Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Final rule. AGENCY: We are adopting a new airworthiness directive (AD) for Centrair Model 101, 101A, 101AP, and 101P gliders. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as structural damage to the fuselage. We are issuing this AD to require actions to address the unsafe condition on these products. DATES: This AD is effective May 27, 2014. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in the AD as of May 27, 2014. ADDRESSES: You may examine the AD docket on the Internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2014– 0018; or in person at Document Management Facility, U.S. Department of Transportation, Docket Operations, M–30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC 20590. For service information identified in ´ ´ this AD, contact Societe Nouvelle CENTRAIR, Aerodrome B.P. 44, F36300 LeBlanc, France; telephone: +33(0)254370796, fax: +33(0)254374864, email: contact@sncentrair.com; Internet: none. You may view this referenced service information at the FAA, Small Airplane Directorate, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at the FAA, call (816) 329– 4148. FOR FURTHER INFORMATION CONTACT: Jim Rutherford, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329–4165; fax: (816) 329–4090; email: jim.rutherford@ faa.gov. SUPPLEMENTARY INFORMATION: SUMMARY: E:\FR\FM\22APR1.SGM 22APR1

Agencies

[Federal Register Volume 79, Number 77 (Tuesday, April 22, 2014)]
[Rules and Regulations]
[Pages 22367-22369]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-08142]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2014-0042; Directorate Identifier 2013-CE-050-AD; 
Amendment 39-17823; AD 2014-07-09]
RIN 2120-AA64


Airworthiness Directives; British Aerospace Regional Aircraft 
Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are adopting a new airworthiness directive (AD) for British 
Aerospace Regional Aircraft Jetstream Series 3101 and Jetstream Model 
3201 airplanes. This AD results from mandatory continuing airworthiness 
information (MCAI) issued by an aviation authority of another country 
to identify and correct an unsafe condition on an aviation product. The 
MCAI describes the unsafe condition as inadequate instructions for 
inspection for corrosion on the rudder upper hinge bracket and certain 
internal wing and drainage paths. We are issuing this AD to require 
actions to address the unsafe condition on these products.

DATES: This AD is effective May 27, 2014.
    The Director of the Federal Register approved the incorporation by 
reference of a certain publication listed in the AD as of May 27, 2014.

ADDRESSES: You may examine the AD docket on the Internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2014-
0042; or in person at Document Management Facility, U.S. Department of 
Transportation, Docket Operations, M-30, West Building Ground Floor, 
Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590.
    For service information identified in this AD, contact BAE Systems 
(Operations) Limited, Customer Information Department, Prestwick 
International Airport, Ayrshire, KA9 2RW, Scotland, United Kingdom; 
telephone: +44 1292 675207; fax: +44 1292 675704; email: 
RApublications@baesystems.com; Internet: https://www.baesystems.com/Businesses/RegionalAircraft/. You may review this referenced service 
information at the FAA, Small Airplane Directorate, 901 Locust, Kansas 
City, Missouri 64106. For information on the availability of this 
material at the FAA, call (816) 329-4148.

FOR FURTHER INFORMATION CONTACT: Taylor Martin, Aerospace Engineer, 
FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, 
Missouri 64106; telephone: (816) 329-4138; fax: (816) 329-4090; email: 
taylor.martin@faa.gov.

SUPPLEMENTARY INFORMATION:

Discussion

    We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR 
part 39 by adding an AD that would apply to British Aerospace Regional 
Aircraft Jetstream Series 3101 and Jetstream Model 3201 airplanes. The 
NPRM was published in the Federal Register on January 31, 2014 (79 FR 
5323). The NPRM proposed to correct an unsafe condition for the 
specified products and was based on mandatory continuing airworthiness 
information (MCAI) originated by an aviation authority of another 
country. The MCAI states:

    Compliance with the inspections in the Corrosion Prevention and 
Control Programme (CPCP) has been identified as a mandatory action 
for continued airworthiness and UK CAA AD 003-04-94 was issued to 
require operators to comply with those inspection instructions.
    Since the issuance of that AD, reports have been received of 
finding extensive corrosion on the rudder upper hinge bracket. 
Although there is an existing zonal inspection of the area in the 
CPCP, it has been concluded that this is inadequate to identify the 
corrosion on this bracket and consequently, a new specific 
inspection of the rudder upper hinge bracket,

[[Page 22368]]

task 200/EX/01 C2, has been added to the CPCP, currently at Revision 
6. Failure of the rudder upper hinge bracket could lead to the onset 
of flutter and loss of control of the aeroplane.
    In addition, although the CPCP already included a wing internal 
inspection to check for corrosion and to verify that all drainage 
paths are clear, prompted by feedback from the fleet sampling 
programme, a new, more specific, inspection of wing stations 36, 51 
and 83, together with a check of the drainage paths, has been 
introduced into the CPCP through task 3/400/IN/01 C2. Failure to 
comply with these instructions could result in an unsafe condition.
    For the reasons described above, this AD retains the 
requirements of UK CAA AD 003-04-94, which is superseded, and 
requires the implementation of the new inspections.

    The MCAI can be found in the AD docket on the Internet at: https://www.regulations.gov/#!documentDetail;D=FAA-2014-0042-0002.

Comments

    We gave the public the opportunity to participate in developing 
this AD. We received no comments on the NPRM (79 FR 5323, January 31, 
2014) or on the determination of the cost to the public.

Conclusion

    We reviewed the relevant data and determined that air safety and 
the public interest require adopting the AD as proposed except for 
minor editorial changes. We have determined that these minor changes:
     Are consistent with the intent that was proposed in the 
NPRM (79 FR 5323, January 31, 2014) for correcting the unsafe 
condition; and
     Do not add any additional burden upon the public than was 
already proposed in the NPRM (79 FR 5323, January 31, 2014).

Costs of Compliance

    We estimate that this AD will affect 66 products of U.S. registry. 
We also estimate that it would take about 100 work-hours per product to 
comply with the basic requirements of this AD. The average labor rate 
is $85 per work-hour.
    Based on these figures, we estimate the cost of the AD on U.S. 
operators to be $561,000, or $8,500 per product.
    The scope of damage found in the required inspection could vary 
significantly from airplane to airplane. We have no way of determining 
how much damage may be found on each airplane or the cost to repair 
damaged parts on each airplane or the number of airplanes that may 
require repair.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. ``Subtitle VII: Aviation 
Programs,'' describes in more detail the scope of the Agency's 
authority.
    We are issuing this rulemaking under the authority described in 
``Subtitle VII, Part A, Subpart III, Section 44701: General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We determined that this AD will not have federalism implications 
under Executive Order 13132. This AD will not have a substantial direct 
effect on the States, on the relationship between the national 
government and the States, or on the distribution of power and 
responsibilities among the various levels of government.
    For the reasons discussed above, I certify this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979),
    (3) Will not affect intrastate aviation in Alaska, and
    (4) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

Examining the AD Docket

    You may examine the AD docket on the Internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2014-
0042; or in person at the Docket Management Facility between 9 a.m. and 
5 p.m., Monday through Friday, except Federal holidays. The AD docket 
contains the NPRM, the regulatory evaluation, any comments received, 
and other information. The street address for the Docket Office 
(telephone (800) 647-5527) is in the ADDRESSES section. Comments will 
be available in the AD docket shortly after receipt.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new AD:

2014-07-09 British Aerospace Regional Aircraft: Amendment 39-17823; 
Docket No. FAA-2014-0042; Directorate Identifier 2013-CE-050-AD.

(a) Effective Date

    This airworthiness directive (AD) becomes effective May 27, 
2014.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to British Aerospace Regional Aircraft Jetstream 
Series 3101 and Model 3201 airplanes, all serial numbers, 
certificated in any category.

(d) Subject

    Air Transport Association of America (ATA) Code 5: Time Limits.

(e) Reason

    This AD was prompted by mandatory continuing airworthiness 
information (MCAI) originated by an aviation authority of another 
country to identify and correct an unsafe condition on an aviation 
product. The MCAI describes the unsafe condition as inadequate 
instructions for inspection for corrosion on the rudder upper hinge 
bracket and certain internal wing stations and drainage paths. We 
are issuing this AD to prevent, detect, and correct corrosion on the 
rudder upper hinge bracket and internal wing, which could lead to 
reduced structural integrity of the airplane with consequent loss of 
control.

(f) Actions and Compliance

    Comply with this AD within the compliance times specified in 
paragraphs (f)(1) through (f)(4) of this AD, including all 
subparagraphs, unless already done:
    (1) After May 27, 2014 (the effective date of this AD), except 
as required by paragraph (f)(2) of this AD, within the thresholds 
and intervals specified, incorporate into the FAA-approved 
maintenance program BAE Systems (Operations) Limited Jetstream 
Series 3100 & 3200 Corrosion Prevention and Control Programme, 
Manual Ref. JS/CPCP/01, Revision 6, dated November 15, 2010, in its 
entirety.
    (2) Within 2 years after May 27, 2014 (the effective date of 
this AD), do the initial inspections specified in tasks 200/EX/01 C2 
and 3/400/IN/01 C2 in BAE Systems (Operations) Limited Jetstream 
Series 3100 &

[[Page 22369]]

3200 Corrosion Prevention and Control Programme, Manual Ref. JS/
CPCP/01, Revision 6, dated November 15, 2010.
    (3) If any discrepancy, particularly corrosion, is found during 
any inspections or tasks required by paragraphs (f)(1) and (f)(2) of 
this AD, within the compliance time specified, repair or replace, as 
applicable, all damaged structural parts and components and do the 
maintenance procedures for corrective action following BAE Systems 
(Operations) Limited Jetstream Series 3100 & 3200 Corrosion 
Prevention and Control Programme, Manual Ref. JS/CPCP/01, Revision 
6, dated November 15, 2010. If no compliance time is defined, do the 
applicable corrective action before further flight.
    (4) You may comply with the requirements of paragraphs (f)(1) 
and (f)(2) of this AD by incorporating BAE Systems (Operations) 
Limited Jetstream Series 3100 & 3200 Corrosion Prevention and 
Control Programme, Manual Ref. JS/CPCP/01, Revision 6, dated 
November 15, 2010, into your maintenance program (instructions for 
continued airworthiness) and complying with that program.

(g) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
Standards Office, FAA, has the authority to approve AMOCs for this 
AD, if requested using the procedures found in 14 CFR 39.19. Send 
information to ATTN: Taylor Martin, Aerospace Engineer, FAA, Small 
Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 
64106; telephone: (816) 329-4138; fax: (816) 329-4090; email: 
taylor.martin@faa.gov. Before using any approved AMOC on any 
airplane to which the AMOC applies, notify your appropriate 
principal inspector (PI) in the FAA Flight Standards District Office 
(FSDO), or lacking a PI, your local FSDO.
    (2) Airworthy Product: For any requirement in this AD to obtain 
corrective actions from a manufacturer or other source, use these 
actions if they are FAA-approved. Corrective actions are considered 
FAA-approved if they are approved by the State of Design Authority 
(or their delegated agent). You are required to assure the product 
is airworthy before it is returned to service.
    (3) Reporting Requirements: For any reporting requirement in 
this AD, a federal agency may not conduct or sponsor, and a person 
is not required to respond to, nor shall a person be subject to a 
penalty for failure to comply with a collection of information 
subject to the requirements of the Paperwork Reduction Act unless 
that collection of information displays a current valid OMB Control 
Number. The OMB Control Number for this information collection is 
2120-0056. Public reporting for this collection of information is 
estimated to be approximately 5 minutes per response, including the 
time for reviewing instructions, completing and reviewing the 
collection of information. All responses to this collection of 
information are mandatory. Comments concerning the accuracy of this 
burden and suggestions for reducing the burden should be directed to 
the FAA at: 800 Independence Ave. SW., Washington, DC 20591, Attn: 
Information Collection Clearance Officer, AES-200.

(h) Related Information

    MCAI European Aviation Safety Agency (EASA) AD No.: 2012-0036, 
dated March 12, 2012, for related information. The MCAI can be found 
in the AD docket on the Internet at: https://www.regulations.gov/#!documentDetail;D=FAA-2014-0042-0002.

(i) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless the AD specifies otherwise.
    (i) BAE Systems (Operations) Limited Jetstream Series 3100 & 
3200 Corrosion Prevention and Control Programme, Manual Ref: JS/
CPCP/01, Revision 6, dated November 15, 2010.
    (ii) Reserved.
    (3) For British Aerospace Regional Aircraft service information 
identified in this AD, contact BAE Systems (Operations) Limited, 
Customer Information Department, Prestwick International Airport, 
Ayrshire, KA9 2RW, Scotland, United Kingdom; telephone: +44 1292 
675207; fax: +44 1292 675704; email: RApublications@baesystems.com; 
Internet: https://www.baesystems.com/Businesses/RegionalAircraft/.
    (4) You may view this service information at the FAA, Small 
Airplane Directorate, 901 Locust, Kansas City, Missouri 64106. For 
information on the availability of this material at the FAA, call 
(816) 329-4148.
    (5) You may view this service information that is incorporated 
by reference at the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, call 202-741-6030, or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued in Kansas City, Missouri, on April 4, 2014.
Earl Lawrence,
Manager, Small Airplane Directorate, Aircraft Certification Service.
[FR Doc. 2014-08142 Filed 4-21-14; 8:45 am]
BILLING CODE 4910-13-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.