Foreign-Trade Zone (FTZ) 72-Indianapolis, Indiana, Notification of Proposed Production Activity, OHL Contract Logistics, LLC, (Kitting-Subassemblies and Parts for Heavy Trucks, Excavation Machinery), Plainfield, Indiana, 18665-18666 [2014-07483]
Download as PDF
Federal Register / Vol. 79, No. 64 / Thursday, April 3, 2014 / Notices
notice to OIRA_Submission@
omb.eop.gov or faxed to (202) 395–5806.
Gwellnar Banks,
Management Analyst, Office of the Chief
Information Officer.
[FR Doc. 2014–07425 Filed 4–2–14; 8:45 am]
BILLING CODE 3510–JE–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–33–2014]
pmangrum on DSK3VPTVN1PROD with NOTICES
Foreign-Trade Zone (FTZ) 72—
Indianapolis, Indiana, Notification of
Proposed Production Activity, OHL
Contract Logistics, LLC, (Kitting—
Subassemblies and Parts for Heavy
Trucks, Excavation Machinery),
Plainfield, Indiana
OHL Contract Logistics, LLC (OHL),
an operator of FTZ 72, submitted a
notification of proposed production
activity to the FTZ Board for its facility
located in Plainfield, Indiana within
FTZ 72. The notification conforming to
the requirements of the regulations of
the FTZ Board (15 CFR 400.22) was
received on March 12, 2014.
The OHL facility is located within
Site 16 of FTZ 72. The facility is used
for the production of kits comprised of
parts, components, and subassemblies
for heavy trucks, excavation machinery,
and related equipment. Pursuant to 15
CFR 400.14(b), FTZ authority would be
limited to the specific foreign-status
materials and components and specific
finished products described in the
submitted notification (as described
below) and subsequently authorized by
the FTZ Board.
Production under FTZ procedures
could exempt OHL from customs duty
payments on the foreign status
materials/components used in export
production. On its domestic sales, OHL
would be able to choose the duty rates
during customs entry procedures that
apply to: Grease kits; sealant kits;
antifreeze kits; plastic tube kits; plastic
brake line guard kits; body down sensor
kits; rubber hose kits; hydraulic breather
hose kits; rubber gasket kits; seal kits;
mount kits; mudguard kits; strut damper
kits; manual (drawings, repair, decal)
kits; mirror kits; insulation kits; drain
plug kits; hoist support kits; fitting kits;
plug assembly kits; fuel cap breather
kits; metal tank/container/can kits;
accumulator kits; steel fastener/nut/
washer/ring/shim/clamp kits; steel
isolator kits; bushing installation kits;
crimper kits; tool kits; keys kits; hinge
kits; mounting/fitting kits; service center
line kits; steel tubing kits; oil drain kits;
VerDate Mar<15>2010
15:17 Apr 02, 2014
Jkt 232001
fuel line kits; shutdown kits; switch
kits; housing kits; cover kits; gear kits;
hydraulic motor parts kits; actuators
kits; cylinder kits; engine seal kits;
hydraulic pump kits; lubricating kits;
bracket kits; air-conditioning
compressor and mounting kits; blower
kits; exhaust kits; rectifier enclosure
kits; cooling duct-chassis kits; electrical
kits; air-conditioning kits; heat
exchanger kits; oil/fuel/air filter kits;
load weigh kits; engine/transmission lift
kits; jack kits; hoist kits; kingpin
bushing kits; lift assembly kits;
reduction valve kits; check/relief valve
kits; valve repair kits; sample port kits;
fast fuel kits; seal kits; fittings kits; hoist
valve parts kits; hydraulic breather
relocation kits; bearing assembly/repair
kits; differential repair kits; PTO
overhaul kits; bearing kits; roller/spider/
carrier bearing repair kits; thrust washer
kits; grid motor with air duct kits;
electric/DC motor kits; rectifier repair
kits; battery equalizer kits; battery cable
kits; battery kits; disconnect switch kits;
DC converter kits; magnetic cap kits;
voltage regulator kits; gauge kits;
headlight kits; flasher kits; backup alarm
kits; windshield washer kits; hot start
kits; engine heater kits; mine
management telemetry kits; software
diagnostic/update kits; smart card kits;
radio-cassette kits; safety monitor
retrofit kits; speed limiting kits;
indicator light kits; indicator panel parts
kits; grid box resistor update kits; circuit
breaker kits; electrical switch kits;
junction kits; regulator kits; terminal
kits; electrical repair kits;
instrumentation kits; diode installation
kits; tail light kits; power cable kits;
wiring harness kits; electrical kits;
bearing hub isolator kits; wiring/
electrical conduit kits; cab assembly
kits; body parts/accessories kits;
driveline kits; driveline guide kits; fan
and belt kits; hoist valve parts kits; lever
assembly kits; shield rework kits;
steering upgrade kits; tank repair kits;
tower assembly kits; track rod lug kits;
transmission guard kits; brake part kits;
shifter replacement kits; spindle kits;
axle and parts kits; hydraulic tube kits;
wheel kits; suspension seal kits; frame
repair kits; radiator mount kits; exhaust
kits; piston-ring kits; shift selector kits;
handle assembly kits; driveshaft kits;
steering kits; frame repair kits; PTO
driveline kits; planetary kits; journal
and shim kits; dust cap-seal kits; pump
isolation kits; fuel tank/fittings kits; fuel
tank vent hose kits; frame re-work kits;
fall protection kits; inverter plate
installation kits; cab connector guard
kits; hydraulic tank kits; coolant tube
kits; air duct kits; air inlet silencer kits;
anchor shackle kits; high arc re-work
PO 00000
Frm 00003
Fmt 4703
Sfmt 4703
18665
kits; yoke assembly kits; tank breather
kits; hoist cylinder kits; fluid level
sensor kits; transducer kits; temperature
gauge kits; fuel level kits; speedometer/
tachometer kits; instrument conversion
kits; electrical current instrument kits;
body angle sensor kits; camera kits;
controller kits; and, seat kits (duty rate
ranges from free–9.0%; 12¢/doz+5.5%)
for the foreign status materials/
components noted below. Customs
duties also could possibly be deferred or
reduced on foreign status production
equipment.
The materials/components sourced
from abroad include: Greases; nitrogen
cartridges; primers; solvents; sealing
compounds; lubricants; anti-seize
pastes; adhesives; refrigerants; antifreeze/coolants; plastic tubing/shrink/
hose assemblies/tapes/protectors/
handles/knobs/packing-sealing
materials/assemblies/rings/o-rings/
seals/ring wear/moldings/ring backs/
guides/wipers/rods/bases/seal steps/
packing materials/v-belts/cable ties/
boots/louvers/sleeves/fuel tanks/caps;
rubber pads/tapes/mudguards/belts/
hoses and assemblies/fittings/brake
hoses/fasteners/sound insulators/
gaskets/washers/seals/covers/guards/
mounts/vibration mounts/moldings/air
baffles/dampers/valves/bushings/boots/
valve vacuators; tool bags of textile
materials (HTSUS Subheading 4202.12);
paper marker wire (labels)/gaskets;
service bulletins; instruction manuals;
drawings; cards; schematics; transfers;
decals; Mylar films; felt hoses/seals/
pads/covers; ducts; looms; gaskets;
abrasive strips; insulation blankets;
exhaust blankets; brake linings/pads;
carbon fiber gaskets; glass; mirrors;
fiberglass covers; steel bars/wires/caps/
tubes/weldments/fittings/unions/
flanges/tanks/accumulators/tie wires/
rings/cable strands/springs/bushings;
locks; fasteners (screws, bolts, nuts,
pins, cotter pins); spacers; steel rods/
clamps/plugs/threaded inserts/gaskets/
shackles; copper fittings/washers/plugs/
up rings; aluminum manifold blocks/
tubes/caps/plates; hand tools; clamps
and related assemblies; service tool kits;
gauges; locks/keys; hinges; base metal
mountings and fittings; latches;
supports; brackets; bracket/mount/
clamp assemblies; steel flex tubing;
plates; name plates and related
assemblies; yokes; hydraulic cylinders
and related parts; electric motors;
pumps/pump kits and parts;
compressors; fans; rectifier enclosures;
air-conditioning/heat units/clutches;
condensing units; drain hose kits;
actuators; coolers; filters; air cleaners;
elements; breather vents; haultronics
kits; fire suppression system parts;
E:\FR\FM\03APN1.SGM
03APN1
pmangrum on DSK3VPTVN1PROD with NOTICES
18666
Federal Register / Vol. 79, No. 64 / Thursday, April 3, 2014 / Notices
engine/transmission lifts; lifter
weldments; drills; data cables/adapters;
converters; valves and assemblies; valve
covers; tie rods; controllers; manifolds;
solenoids; hand taps; bearings and
related assemblies; cups; cones; shafts;
driveshafts; cranks; bushings; gears;
couplings; hubs; pulleys and related
adapters; pinions; motors (e.g., grid box,
traction) and related parts; transformers;
converters; wiring harnesses; battery
equalizers; connectors; rectifiers and
covers; arc chute kits; magnetic caps;
batteries; cable assemblies; controllers
and panels; lamps; headlamps; tail
lamps; parts of lighting equipment;
indicators; horns; load weigh assembly
boxes; alarms; lenses; flashers; telemetry
devices; interface cables; cameras and
related harnesses; radios; monitors;
displays; speed limiters; indicator
boxes; voltage sensors; potentiometers;
fuses and holders; circuit breakers;
relays; modules; socket assemblies;
blocks; terminals; splices; buss bars;
contacts; receptacles; isolators and
related assemblies; junction boxes;
jumpers; panels; ECUs; electrical cables;
loadweigh equipment; boards;
moldings; FPGA cards; conduits; camera
cables; sub-cabs; air baffles; retainers;
straps; stamped body parts (e.g., boxes,
fenders, guards); bands; deflectors;
machining daggers; heat shields; disks
and locators; levers; door/body
templates; sheet metal walkways; fuel
lines; gussets; keepers; anchors;
platforms; channels; support frames;
sleeves; housings; grilles; frame parts
and lugs; handles; steps; tank protective
parts; brakes and related parts; ring
seals; oil pans; strips; shims; drive axles
and related parts; road wheels and
related parts; rings; guides; air coolers;
mufflers; exhaust parts; engine parts
(e.g., pistons, rings); cylinders; sockets;
steering parts; fuel tanks; hydraulic
tanks; insulated boxes; sensors (e.g.,
fluid, velocity, pressure, temperature);
transducers; senders; tachometers;
testing instruments; loadweigh
equipment; thermostats; grommets;
puller plate assemblies; tool assemblies;
outlet sections; plungers; arms; links;
pivots; heaters; resistors; switches;
electrical plugs; electrical boxes;
warning systems; software; ballselectrical; diodes; integrated circuit
parts; electrical sensors/brushes/brush
holders/brush springs/insulation/
insulators; motor vehicle parts (bars,
covers, pads, weldments, rods, tubes,
angles, bases, drums); power train parts;
tube assemblies; sensor assemblies; and,
seats and related supports (duty rate
ranges from free to 9.9%, 12¢/
doz+5.5%). Inputs included in certain
textile categories (classified within
VerDate Mar<15>2010
15:17 Apr 02, 2014
Jkt 232001
HTSUS Subheading 4202.12) will be
admitted to the zone under domestic
(duty-paid) status or privileged foreign
status (19 CFR 146.41), thereby
precluding inverted tariff benefits on
such items.
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is May
13, 2014.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For Further Information Contact:
Pierre Duy at Pierre.Duy@trade.gov,
(202) 482–1378.
Dated: March 27, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014–07483 Filed 4–2–14; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
Andrew McGilvray,
Executive Secretary.
[B–32–2014]
Foreign-Trade Zone (FTZ) 75—
Phoenix, Arizona, Notification of
Proposed Production Activity, Isola
USA Corporation (Dielectric Prepreg
and Copper-Clad Laminate), Chandler,
Arizona
The City of Phoenix, Arizona, grantee
of FTZ 75, submitted a notification of
proposed production activity to the FTZ
Board on behalf of Isola USA
Corporation (Isola), located in Chandler,
Arizona. The notification conforming to
the requirements of the regulations of
the FTZ Board (15 CFR 400.22) was
received on March 19, 2014.
A separate application for usagedriven site designation at the Isola
facility was submitted and will be
processed under Section 400.38 of the
Board’s regulations. The facility is used
to produce customized dielectric
prepreg and copper-clad laminate sheets
used by its customers to fabricate
multilayer printed circuit boards.
Pursuant to 15 CFR 400.14(b), FTZ
activity would be limited to the specific
foreign-status material and specific
finished products described in the
submitted notification (as described
below) and subsequently authorized by
the FTZ Board.
PO 00000
Frm 00004
Fmt 4703
Sfmt 4703
Production under FTZ procedures
could exempt Isola from customs duty
payments on the foreign status material
used in export production. On its
domestic sales, Isola would be able to
choose the duty rates during customs
entry procedures that apply to
customized dielectric prepreg and
copper-clad laminate sheets (duty
rates—4.2% and 3%, respectively) for
foreign-status electrical grade woven
fiberglass rolls (HTSUS 7019.52.4010,
duty rate—7.3%). Customs duties also
could possibly be deferred or reduced
on foreign status production equipment.
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary at the address below. The
closing period for their receipt is May
13, 2014.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For Further Information Contact:
Diane Finver at Diane.Finver@trade.gov
or (202) 482–1367.
[FR Doc. 2014–07481 Filed 4–2–14; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–552–801]
Certain Frozen Fish Fillets From the
Socialist Republic of Vietnam:
Initiation of Antidumping Duty New
Shipper Reviews; 2013–2014
Enforcement and Compliance,
Formerly Import Administration,
International Trade Administration,
Department of Commerce.
DATES: Effective Date: April 3, 2014.
SUMMARY: The Department of Commerce
(‘‘the Department’’) has received timely
requests for new shipper reviews
(‘‘NSRs’’) of the antidumping duty
(‘‘AD’’) order on certain frozen fish
fillets (‘‘fish fillets’’) from the Socialist
Republic of Vietnam (‘‘Vietnam’’). The
Department has determined that
requests meet the statutory and
regulatory requirements for initiation.
The period of review (‘‘POR’’) for these
NSRs is August 1, 2013, through January
31, 2014.
AGENCY:
E:\FR\FM\03APN1.SGM
03APN1
Agencies
[Federal Register Volume 79, Number 64 (Thursday, April 3, 2014)]
[Notices]
[Pages 18665-18666]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-07483]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-33-2014]
Foreign-Trade Zone (FTZ) 72--Indianapolis, Indiana, Notification
of Proposed Production Activity, OHL Contract Logistics, LLC,
(Kitting--Subassemblies and Parts for Heavy Trucks, Excavation
Machinery), Plainfield, Indiana
OHL Contract Logistics, LLC (OHL), an operator of FTZ 72, submitted
a notification of proposed production activity to the FTZ Board for its
facility located in Plainfield, Indiana within FTZ 72. The notification
conforming to the requirements of the regulations of the FTZ Board (15
CFR 400.22) was received on March 12, 2014.
The OHL facility is located within Site 16 of FTZ 72. The facility
is used for the production of kits comprised of parts, components, and
subassemblies for heavy trucks, excavation machinery, and related
equipment. Pursuant to 15 CFR 400.14(b), FTZ authority would be limited
to the specific foreign-status materials and components and specific
finished products described in the submitted notification (as described
below) and subsequently authorized by the FTZ Board.
Production under FTZ procedures could exempt OHL from customs duty
payments on the foreign status materials/components used in export
production. On its domestic sales, OHL would be able to choose the duty
rates during customs entry procedures that apply to: Grease kits;
sealant kits; antifreeze kits; plastic tube kits; plastic brake line
guard kits; body down sensor kits; rubber hose kits; hydraulic breather
hose kits; rubber gasket kits; seal kits; mount kits; mudguard kits;
strut damper kits; manual (drawings, repair, decal) kits; mirror kits;
insulation kits; drain plug kits; hoist support kits; fitting kits;
plug assembly kits; fuel cap breather kits; metal tank/container/can
kits; accumulator kits; steel fastener/nut/washer/ring/shim/clamp kits;
steel isolator kits; bushing installation kits; crimper kits; tool
kits; keys kits; hinge kits; mounting/fitting kits; service center line
kits; steel tubing kits; oil drain kits; fuel line kits; shutdown kits;
switch kits; housing kits; cover kits; gear kits; hydraulic motor parts
kits; actuators kits; cylinder kits; engine seal kits; hydraulic pump
kits; lubricating kits; bracket kits; air-conditioning compressor and
mounting kits; blower kits; exhaust kits; rectifier enclosure kits;
cooling duct-chassis kits; electrical kits; air-conditioning kits; heat
exchanger kits; oil/fuel/air filter kits; load weigh kits; engine/
transmission lift kits; jack kits; hoist kits; kingpin bushing kits;
lift assembly kits; reduction valve kits; check/relief valve kits;
valve repair kits; sample port kits; fast fuel kits; seal kits;
fittings kits; hoist valve parts kits; hydraulic breather relocation
kits; bearing assembly/repair kits; differential repair kits; PTO
overhaul kits; bearing kits; roller/spider/carrier bearing repair kits;
thrust washer kits; grid motor with air duct kits; electric/DC motor
kits; rectifier repair kits; battery equalizer kits; battery cable
kits; battery kits; disconnect switch kits; DC converter kits; magnetic
cap kits; voltage regulator kits; gauge kits; headlight kits; flasher
kits; backup alarm kits; windshield washer kits; hot start kits; engine
heater kits; mine management telemetry kits; software diagnostic/update
kits; smart card kits; radio-cassette kits; safety monitor retrofit
kits; speed limiting kits; indicator light kits; indicator panel parts
kits; grid box resistor update kits; circuit breaker kits; electrical
switch kits; junction kits; regulator kits; terminal kits; electrical
repair kits; instrumentation kits; diode installation kits; tail light
kits; power cable kits; wiring harness kits; electrical kits; bearing
hub isolator kits; wiring/electrical conduit kits; cab assembly kits;
body parts/accessories kits; driveline kits; driveline guide kits; fan
and belt kits; hoist valve parts kits; lever assembly kits; shield
rework kits; steering upgrade kits; tank repair kits; tower assembly
kits; track rod lug kits; transmission guard kits; brake part kits;
shifter replacement kits; spindle kits; axle and parts kits; hydraulic
tube kits; wheel kits; suspension seal kits; frame repair kits;
radiator mount kits; exhaust kits; piston-ring kits; shift selector
kits; handle assembly kits; driveshaft kits; steering kits; frame
repair kits; PTO driveline kits; planetary kits; journal and shim kits;
dust cap-seal kits; pump isolation kits; fuel tank/fittings kits; fuel
tank vent hose kits; frame re-work kits; fall protection kits; inverter
plate installation kits; cab connector guard kits; hydraulic tank kits;
coolant tube kits; air duct kits; air inlet silencer kits; anchor
shackle kits; high arc re-work kits; yoke assembly kits; tank breather
kits; hoist cylinder kits; fluid level sensor kits; transducer kits;
temperature gauge kits; fuel level kits; speedometer/tachometer kits;
instrument conversion kits; electrical current instrument kits; body
angle sensor kits; camera kits; controller kits; and, seat kits (duty
rate ranges from free-9.0%; 12[cent]/doz+5.5%) for the foreign status
materials/components noted below. Customs duties also could possibly be
deferred or reduced on foreign status production equipment.
The materials/components sourced from abroad include: Greases;
nitrogen cartridges; primers; solvents; sealing compounds; lubricants;
anti-seize pastes; adhesives; refrigerants; anti-freeze/coolants;
plastic tubing/shrink/hose assemblies/tapes/protectors/handles/knobs/
packing-sealing materials/assemblies/rings/o-rings/seals/ring wear/
moldings/ring backs/guides/wipers/rods/bases/seal steps/packing
materials/v-belts/cable ties/boots/louvers/sleeves/fuel tanks/caps;
rubber pads/tapes/mudguards/belts/hoses and assemblies/fittings/brake
hoses/fasteners/sound insulators/gaskets/washers/seals/covers/guards/
mounts/vibration mounts/moldings/air baffles/dampers/valves/bushings/
boots/valve vacuators; tool bags of textile materials (HTSUS Subheading
4202.12); paper marker wire (labels)/gaskets; service bulletins;
instruction manuals; drawings; cards; schematics; transfers; decals;
Mylar films; felt hoses/seals/pads/covers; ducts; looms; gaskets;
abrasive strips; insulation blankets; exhaust blankets; brake linings/
pads; carbon fiber gaskets; glass; mirrors; fiberglass covers; steel
bars/wires/caps/tubes/weldments/fittings/unions/flanges/tanks/
accumulators/tie wires/rings/cable strands/springs/bushings; locks;
fasteners (screws, bolts, nuts, pins, cotter pins); spacers; steel
rods/clamps/plugs/threaded inserts/gaskets/shackles; copper fittings/
washers/plugs/up rings; aluminum manifold blocks/tubes/caps/plates;
hand tools; clamps and related assemblies; service tool kits; gauges;
locks/keys; hinges; base metal mountings and fittings; latches;
supports; brackets; bracket/mount/clamp assemblies; steel flex tubing;
plates; name plates and related assemblies; yokes; hydraulic cylinders
and related parts; electric motors; pumps/pump kits and parts;
compressors; fans; rectifier enclosures; air-conditioning/heat units/
clutches; condensing units; drain hose kits; actuators; coolers;
filters; air cleaners; elements; breather vents; haultronics kits; fire
suppression system parts;
[[Page 18666]]
engine/transmission lifts; lifter weldments; drills; data cables/
adapters; converters; valves and assemblies; valve covers; tie rods;
controllers; manifolds; solenoids; hand taps; bearings and related
assemblies; cups; cones; shafts; driveshafts; cranks; bushings; gears;
couplings; hubs; pulleys and related adapters; pinions; motors (e.g.,
grid box, traction) and related parts; transformers; converters; wiring
harnesses; battery equalizers; connectors; rectifiers and covers; arc
chute kits; magnetic caps; batteries; cable assemblies; controllers and
panels; lamps; headlamps; tail lamps; parts of lighting equipment;
indicators; horns; load weigh assembly boxes; alarms; lenses; flashers;
telemetry devices; interface cables; cameras and related harnesses;
radios; monitors; displays; speed limiters; indicator boxes; voltage
sensors; potentiometers; fuses and holders; circuit breakers; relays;
modules; socket assemblies; blocks; terminals; splices; buss bars;
contacts; receptacles; isolators and related assemblies; junction
boxes; jumpers; panels; ECUs; electrical cables; loadweigh equipment;
boards; moldings; FPGA cards; conduits; camera cables; sub-cabs; air
baffles; retainers; straps; stamped body parts (e.g., boxes, fenders,
guards); bands; deflectors; machining daggers; heat shields; disks and
locators; levers; door/body templates; sheet metal walkways; fuel
lines; gussets; keepers; anchors; platforms; channels; support frames;
sleeves; housings; grilles; frame parts and lugs; handles; steps; tank
protective parts; brakes and related parts; ring seals; oil pans;
strips; shims; drive axles and related parts; road wheels and related
parts; rings; guides; air coolers; mufflers; exhaust parts; engine
parts (e.g., pistons, rings); cylinders; sockets; steering parts; fuel
tanks; hydraulic tanks; insulated boxes; sensors (e.g., fluid,
velocity, pressure, temperature); transducers; senders; tachometers;
testing instruments; loadweigh equipment; thermostats; grommets; puller
plate assemblies; tool assemblies; outlet sections; plungers; arms;
links; pivots; heaters; resistors; switches; electrical plugs;
electrical boxes; warning systems; software; balls-electrical; diodes;
integrated circuit parts; electrical sensors/brushes/brush holders/
brush springs/insulation/insulators; motor vehicle parts (bars, covers,
pads, weldments, rods, tubes, angles, bases, drums); power train parts;
tube assemblies; sensor assemblies; and, seats and related supports
(duty rate ranges from free to 9.9%, 12[cent]/doz+5.5%). Inputs
included in certain textile categories (classified within HTSUS
Subheading 4202.12) will be admitted to the zone under domestic (duty-
paid) status or privileged foreign status (19 CFR 146.41), thereby
precluding inverted tariff benefits on such items.
Public comment is invited from interested parties. Submissions
shall be addressed to the FTZ Board's Executive Secretary at the
address below. The closing period for their receipt is May 13, 2014.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.
For Further Information Contact: Pierre Duy at
Pierre.Duy@trade.gov, (202) 482-1378.
Dated: March 27, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014-07483 Filed 4-2-14; 8:45 am]
BILLING CODE 3510-DS-P