Foreign-Trade Zone (FTZ) 75-Phoenix, Arizona, Notification of Proposed Production Activity, Isola USA Corporation (Dielectric Prepreg and Copper-Clad Laminate), Chandler, Arizona, 18666 [2014-07481]
Download as PDF
pmangrum on DSK3VPTVN1PROD with NOTICES
18666
Federal Register / Vol. 79, No. 64 / Thursday, April 3, 2014 / Notices
engine/transmission lifts; lifter
weldments; drills; data cables/adapters;
converters; valves and assemblies; valve
covers; tie rods; controllers; manifolds;
solenoids; hand taps; bearings and
related assemblies; cups; cones; shafts;
driveshafts; cranks; bushings; gears;
couplings; hubs; pulleys and related
adapters; pinions; motors (e.g., grid box,
traction) and related parts; transformers;
converters; wiring harnesses; battery
equalizers; connectors; rectifiers and
covers; arc chute kits; magnetic caps;
batteries; cable assemblies; controllers
and panels; lamps; headlamps; tail
lamps; parts of lighting equipment;
indicators; horns; load weigh assembly
boxes; alarms; lenses; flashers; telemetry
devices; interface cables; cameras and
related harnesses; radios; monitors;
displays; speed limiters; indicator
boxes; voltage sensors; potentiometers;
fuses and holders; circuit breakers;
relays; modules; socket assemblies;
blocks; terminals; splices; buss bars;
contacts; receptacles; isolators and
related assemblies; junction boxes;
jumpers; panels; ECUs; electrical cables;
loadweigh equipment; boards;
moldings; FPGA cards; conduits; camera
cables; sub-cabs; air baffles; retainers;
straps; stamped body parts (e.g., boxes,
fenders, guards); bands; deflectors;
machining daggers; heat shields; disks
and locators; levers; door/body
templates; sheet metal walkways; fuel
lines; gussets; keepers; anchors;
platforms; channels; support frames;
sleeves; housings; grilles; frame parts
and lugs; handles; steps; tank protective
parts; brakes and related parts; ring
seals; oil pans; strips; shims; drive axles
and related parts; road wheels and
related parts; rings; guides; air coolers;
mufflers; exhaust parts; engine parts
(e.g., pistons, rings); cylinders; sockets;
steering parts; fuel tanks; hydraulic
tanks; insulated boxes; sensors (e.g.,
fluid, velocity, pressure, temperature);
transducers; senders; tachometers;
testing instruments; loadweigh
equipment; thermostats; grommets;
puller plate assemblies; tool assemblies;
outlet sections; plungers; arms; links;
pivots; heaters; resistors; switches;
electrical plugs; electrical boxes;
warning systems; software; ballselectrical; diodes; integrated circuit
parts; electrical sensors/brushes/brush
holders/brush springs/insulation/
insulators; motor vehicle parts (bars,
covers, pads, weldments, rods, tubes,
angles, bases, drums); power train parts;
tube assemblies; sensor assemblies; and,
seats and related supports (duty rate
ranges from free to 9.9%, 12¢/
doz+5.5%). Inputs included in certain
textile categories (classified within
VerDate Mar<15>2010
15:17 Apr 02, 2014
Jkt 232001
HTSUS Subheading 4202.12) will be
admitted to the zone under domestic
(duty-paid) status or privileged foreign
status (19 CFR 146.41), thereby
precluding inverted tariff benefits on
such items.
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is May
13, 2014.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For Further Information Contact:
Pierre Duy at Pierre.Duy@trade.gov,
(202) 482–1378.
Dated: March 27, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014–07483 Filed 4–2–14; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
Andrew McGilvray,
Executive Secretary.
[B–32–2014]
Foreign-Trade Zone (FTZ) 75—
Phoenix, Arizona, Notification of
Proposed Production Activity, Isola
USA Corporation (Dielectric Prepreg
and Copper-Clad Laminate), Chandler,
Arizona
The City of Phoenix, Arizona, grantee
of FTZ 75, submitted a notification of
proposed production activity to the FTZ
Board on behalf of Isola USA
Corporation (Isola), located in Chandler,
Arizona. The notification conforming to
the requirements of the regulations of
the FTZ Board (15 CFR 400.22) was
received on March 19, 2014.
A separate application for usagedriven site designation at the Isola
facility was submitted and will be
processed under Section 400.38 of the
Board’s regulations. The facility is used
to produce customized dielectric
prepreg and copper-clad laminate sheets
used by its customers to fabricate
multilayer printed circuit boards.
Pursuant to 15 CFR 400.14(b), FTZ
activity would be limited to the specific
foreign-status material and specific
finished products described in the
submitted notification (as described
below) and subsequently authorized by
the FTZ Board.
PO 00000
Frm 00004
Fmt 4703
Sfmt 4703
Production under FTZ procedures
could exempt Isola from customs duty
payments on the foreign status material
used in export production. On its
domestic sales, Isola would be able to
choose the duty rates during customs
entry procedures that apply to
customized dielectric prepreg and
copper-clad laminate sheets (duty
rates—4.2% and 3%, respectively) for
foreign-status electrical grade woven
fiberglass rolls (HTSUS 7019.52.4010,
duty rate—7.3%). Customs duties also
could possibly be deferred or reduced
on foreign status production equipment.
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary at the address below. The
closing period for their receipt is May
13, 2014.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For Further Information Contact:
Diane Finver at Diane.Finver@trade.gov
or (202) 482–1367.
[FR Doc. 2014–07481 Filed 4–2–14; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–552–801]
Certain Frozen Fish Fillets From the
Socialist Republic of Vietnam:
Initiation of Antidumping Duty New
Shipper Reviews; 2013–2014
Enforcement and Compliance,
Formerly Import Administration,
International Trade Administration,
Department of Commerce.
DATES: Effective Date: April 3, 2014.
SUMMARY: The Department of Commerce
(‘‘the Department’’) has received timely
requests for new shipper reviews
(‘‘NSRs’’) of the antidumping duty
(‘‘AD’’) order on certain frozen fish
fillets (‘‘fish fillets’’) from the Socialist
Republic of Vietnam (‘‘Vietnam’’). The
Department has determined that
requests meet the statutory and
regulatory requirements for initiation.
The period of review (‘‘POR’’) for these
NSRs is August 1, 2013, through January
31, 2014.
AGENCY:
E:\FR\FM\03APN1.SGM
03APN1
Agencies
[Federal Register Volume 79, Number 64 (Thursday, April 3, 2014)]
[Notices]
[Page 18666]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-07481]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-32-2014]
Foreign-Trade Zone (FTZ) 75--Phoenix, Arizona, Notification of
Proposed Production Activity, Isola USA Corporation (Dielectric Prepreg
and Copper-Clad Laminate), Chandler, Arizona
The City of Phoenix, Arizona, grantee of FTZ 75, submitted a
notification of proposed production activity to the FTZ Board on behalf
of Isola USA Corporation (Isola), located in Chandler, Arizona. The
notification conforming to the requirements of the regulations of the
FTZ Board (15 CFR 400.22) was received on March 19, 2014.
A separate application for usage-driven site designation at the
Isola facility was submitted and will be processed under Section 400.38
of the Board's regulations. The facility is used to produce customized
dielectric prepreg and copper-clad laminate sheets used by its
customers to fabricate multilayer printed circuit boards. Pursuant to
15 CFR 400.14(b), FTZ activity would be limited to the specific
foreign-status material and specific finished products described in the
submitted notification (as described below) and subsequently authorized
by the FTZ Board.
Production under FTZ procedures could exempt Isola from customs
duty payments on the foreign status material used in export production.
On its domestic sales, Isola would be able to choose the duty rates
during customs entry procedures that apply to customized dielectric
prepreg and copper-clad laminate sheets (duty rates--4.2% and 3%,
respectively) for foreign-status electrical grade woven fiberglass
rolls (HTSUS 7019.52.4010, duty rate--7.3%). Customs duties also could
possibly be deferred or reduced on foreign status production equipment.
Public comment is invited from interested parties. Submissions
shall be addressed to the Board's Executive Secretary at the address
below. The closing period for their receipt is May 13, 2014.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.
For Further Information Contact: Diane Finver at
Diane.Finver@trade.gov or (202) 482-1367.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014-07481 Filed 4-2-14; 8:45 am]
BILLING CODE 3510-DS-P