Application(s) for Duty-Free Entry of Scientific Instruments, 11760 [2014-04632]

Download as PDF 11760 Federal Register / Vol. 79, No. 41 / Monday, March 3, 2014 / Notices Biochem., Mol. Biol. & Biophysics, 140 Gortner Lab, 1479 Gortner Ave., St. Paul, MN 55108. Instrument: Anaerobic glovebox for crystallography. Manufacturer: Belle Technology UK Ltd, Great Britain. Intended Use: The instrument will be used to study the growth of crystals of oxygen-sensitive proteins and trapping of catalytic intermediates in crystals of enzymes which utilize oxygen as a substrate. The objective is to produce atomic resolution molecular structures of oxygen-sensitive or oxygen-dependent proteins by x-ray crystallography. The necessary features of this instrument include an entry port in the floor of the microscope box that forms an air-tight seal with a two liter liquid nitrogen dewar mated to the port from outside the box. Air needs to be expelled (purged) from above the liquid nitrogen surface and replaced with gaseous nitrogen. Closure of the port allows removal of the dewar. An air-tight door between the larger anaerobic crystallization box and the anaerobic microscope box is also necessary. Justification for Duty-Free Entry: There are no instruments of the same general category manufactured in the United States. Application accepted by Commissioner of Customs: January 23, 2014. Dated: February 24, 2014. Gregory W. Campbell, Director of Subsidies Enforcement, Enforcement and Compliance. [FR Doc. 2014–04642 Filed 2–28–14; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration mstockstill on DSK4VPTVN1PROD with NOTICES Application(s) for Duty-Free Entry of Scientific Instruments Pursuant to Section 6(c) of the Educational, Scientific and Cultural Materials Importation Act of 1966 (Pub. L. 89–651, as amended by Pub. L. 106– 36; 80 Stat. 897; 15 CFR part 301), we invite comments on the question of whether instruments of equivalent scientific value, for the purposes for which the instruments shown below are intended to be used, are being manufactured in the United States. Comments must comply with 15 CFR 301.5(a)(3) and (4) of the regulations and be postmarked on or before March 24, 2014. Address written comments to Statutory Import Programs Staff, Room 3720, U.S. Department of Commerce, Washington, DC 20230. Applications may be examined between 8:30 a.m. and VerDate Mar<15>2010 19:40 Feb 28, 2014 Jkt 232001 5:00 p.m. at the U.S. Department of Commerce in Room 3720. Docket Number: 14–001. Applicant: Baylor College of Medicine, One Baylor Plaza, Houston, TX 77030. Instrument: Electron Microscope. Manufacturer: FEI Company, Czech Republic. Intended Use: The instrument will be used to analyze medical devices and materials for possible colonization with microorganisms. Justification for DutyFree Entry: There are no instruments of the same general category manufactured in the United States. Application accepted by Commissioner of Customs: January 23, 2014. DEPARTMENT OF COMMERCE International Trade Administration [Application No. 92–12A001] Export Trade Certificate of Review Notice of Issuance of an Amended Export Trade Certificate of Review to Aerospace Industries Association of America, Inc., Application No. 92–12A001. ACTION: DEPARTMENT OF COMMERCE SUMMARY: The U.S. Department of Commerce issued an amended Export Trade Certificate of Review to Aerospace Industries Association of America, Inc. (‘‘AIA’’) on February 18, 2014. FOR FURTHER INFORMATION CONTACT: Joseph E. Flynn, Director, Office of Trade and Economic Analysis, International Trade Administration, by telephone at (202) 482–5131 (this is not a toll-free number) or email at etca@ trade.gov. International Trade Administration SUPPLEMENTARY INFORMATION: Dated: February 24, 2014. Gregory W. Campbell, Director of Subsidies Enforcement, Enforcement and Compliance. [FR Doc. 2014–04632 Filed 2–28–14; 8:45 am] BILLING CODE 3510–DS–P Automotive Trade Mission to New Delhi, Pune and Chennai, India International Trade Administration, Department of Commerce. ACTION: Notice; cancellation. AGENCY: SUMMARY: The United States Department of Commerce, International Trade Administration, Industry and Analysis previously published a document in the Federal Register on November 25, 2013, 78 FR 70278, regarding the Automotive Trade Mission to New Delhi, Pune and Chennai, India scheduled for April 24— 30, 2014. This mission has been cancelled. Please update the existing notice with a note that this mission is cancelled as of February 19, 2014. FOR FURTHER INFORMATION CONTACT: Frank Spector, Industry and Analysis, Trade Promotion Programs, Phone: 202– 482–2054; Fax: 202–482–9000, Email: Frank.Spector@trade.gov. Cancellation Notice In the Federal Register Notice of November 25, 2013, 78 FR 70278 on page 70278, title note at top of page, correct the subject heading of the notice to read: Automotive Trade Mission to New Delhi, Pure and Chennai, India has been cancelled, April 24–30, 2014. Dated: February 19, 2014. Elnora Moye, Trade Program Assistant. [FR Doc. 2014–04504 Filed 2–28–14; 8:45 am] BILLING CODE 3510–DR–P PO 00000 Frm 00011 Fmt 4703 Sfmt 4703 Title III of the Export Trading Company Act of 1982 (15 U.S.C. 4001–21) authorizes the Secretary of Commerce to issue Export Trade Certificates of Review. The regulations implementing Title III are found at 15 CFR Part 325 (2014). The U.S. Department of Commerce, International Trade Administration, Office of Trade and Economic Analysis (‘‘OTEA’’) is issuing this notice pursuant to 15 CFR 325.6(b), which requires the Secretary of Commerce to publish a summary of the issuance in the Federal Register. Under Section 305(a) of the Export Trading Company Act (15 U.S.C. 4012(b)(1)) and 15 CFR 325.11(a), any person aggrieved by the Secretary’s determination may, within 30 days of the date of this notice, bring an action in any appropriate district court of the United States to set aside the determination on the ground that the determination is erroneous. Description of Certified Conduct AIA’s Export Trade Certificate of Review has been amended to: 1. Add the following companies as new Members of the Certificate within the meaning of section 325.2(l) of the Regulations (15 CFR 325.2(l)): Aero Mechanical Industries (Rio Rancho, NM); Avascent (Washington, DC); Ball Aerospace & Technologies Corp. (Boulder, CO); Castle Metals (Oak Brook, IL); Crane Aerospace & Electronics (Lynnwood, WA); EPS Corporation (Tinton Falls, NJ); Oxford Performance Materials (South Windsor, CT), and The Padina Group, Inc. (Lancaster, PA). E:\FR\FM\03MRN1.SGM 03MRN1

Agencies

[Federal Register Volume 79, Number 41 (Monday, March 3, 2014)]
[Notices]
[Page 11760]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-04632]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


Application(s) for Duty-Free Entry of Scientific Instruments

    Pursuant to Section 6(c) of the Educational, Scientific and 
Cultural Materials Importation Act of 1966 (Pub. L. 89-651, as amended 
by Pub. L. 106-36; 80 Stat. 897; 15 CFR part 301), we invite comments 
on the question of whether instruments of equivalent scientific value, 
for the purposes for which the instruments shown below are intended to 
be used, are being manufactured in the United States.
    Comments must comply with 15 CFR 301.5(a)(3) and (4) of the 
regulations and be postmarked on or before March 24, 2014. Address 
written comments to Statutory Import Programs Staff, Room 3720, U.S. 
Department of Commerce, Washington, DC 20230. Applications may be 
examined between 8:30 a.m. and 5:00 p.m. at the U.S. Department of 
Commerce in Room 3720.
    Docket Number: 14-001. Applicant: Baylor College of Medicine, One 
Baylor Plaza, Houston, TX 77030. Instrument: Electron Microscope. 
Manufacturer: FEI Company, Czech Republic. Intended Use: The instrument 
will be used to analyze medical devices and materials for possible 
colonization with microorganisms. Justification for Duty-Free Entry: 
There are no instruments of the same general category manufactured in 
the United States. Application accepted by Commissioner of Customs: 
January 23, 2014.

    Dated: February 24, 2014.
Gregory W. Campbell,
Director of Subsidies Enforcement, Enforcement and Compliance.
[FR Doc. 2014-04632 Filed 2-28-14; 8:45 am]
BILLING CODE 3510-DS-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.