Airworthiness Directives; Agusta S.p.A. Helicopters, 10333-10335 [2014-01956]
Download as PDF
Federal Register / Vol. 79, No. 37 / Tuesday, February 25, 2014 / Rules and Regulations
(or their delegated agent). You are required
to assure the product is airworthy before it
is returned to service.
(j) Related Information
(1) Refer to Mandatory Continuing
Airworthiness Information (MCAI) Canadian
Airworthiness Directive CF–2012–32, dated
December 13, 2012, for related information.
This MCAI may be found in the AD docket
on the Internet at https://
www.regulations.gov/
#!documentDetail;D=FAA-2013-0705-0002.
(2) Service information identified in this
AD that is not incorporated by reference may
be viewed at the addresses specified in
paragraphs (k)(3) and (k)(4) of this AD.
(k) Material Incorporated by Reference
(1) The Director of the Federal Register
approved the incorporation by reference
(IBR) of the service information listed in this
paragraph under 5 U.S.C. 552(a) and 1 CFR
part 51.
(2) You must use this service information
as applicable to do the actions required by
this AD, unless this AD specifies otherwise.
(i) Bombardier Service Bulletin 700–30–
021, Revision 01, dated November 21, 2012.
(ii) Reserved.
(3) For service information identified in
ˆ
this AD, contact Bombardier, Inc., 400 Cote´
Vertu Road West, Dorval, Quebec H4S 1Y9,
Canada; telephone 514–855–5000; fax 514–
855–7401; email thd.crj@
aero.bombardier.com; Internet https://
www.bombardier.com.
(4) You may view this service information
at the FAA, Transport Airplane Directorate,
1601 Lind Avenue SW., Renton, WA. For
information on the availability of this
material at the FAA, call 425–227–1221.
(5) You may view this service information
that is incorporated by reference at the
National Archives and Records
Administration (NARA). For information on
the availability of this material at NARA, call
202–741–6030, or go to: https://
www.archives.gov/federal-register/cfr/ibrlocations.html.
Issued in Renton, Washington, on January
22, 2014.
Jeffrey E. Duven,
Manager, Transport Airplane Directorate,
Aircraft Certification Service.
[FR Doc. 2014–02523 Filed 2–24–14; 8:45 am]
BILLING CODE 4910–13–P
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA–2014–0035; Directorate
Identifier 2013–SW–036–AD; Amendment
39–17734; AD 2014–02–06]
RIN 2120–AA64
Airworthiness Directives; Agusta
S.p.A. Helicopters
Federal Aviation
Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule; request for
comments.
AGENCY:
We are adopting a new
airworthiness directive (AD) for Agusta
S.p.A. (Agusta) Model AB412
helicopters. This AD requires visually
inspecting the main rotor swashplate
outer ring (outer ring) for a crack and
replacing that outer ring if a crack
exists. This AD is prompted by two
cases of cracks caused by fatigue on
certain outer rings. These actions are
intended to prevent the failure of the
outer ring, which would lead to loss of
main rotor blade pitch control and
subsequently loss of helicopter control.
DATES: This AD becomes effective
March 12, 2014.
The Director of the Federal Register
approved the incorporation by reference
of a certain document listed in this AD
as of March 12, 2014.
We must receive comments on this
AD by April 28, 2014.
ADDRESSES: You may send comments by
any of the following methods:
• Federal eRulemaking Docket: Go to
https://www.regulations.gov. Follow the
online instructions for sending your
comments electronically.
• Fax: 202–493–2251.
• Mail: Send comments to the U.S.
Department of Transportation, Docket
Operations, M–30, West Building
Ground Floor, Room W12–140, 1200
New Jersey Avenue SE., Washington,
DC 20590–0001.
• Hand Delivery: Deliver to the
‘‘Mail’’ address between 9 a.m. and 5
p.m., Monday through Friday, except
Federal holidays.
SUMMARY:
tkelley on DSK3SPTVN1PROD with RULES
Examining the AD Docket
You may examine the AD docket on
the Internet at https://
www.regulations.gov or in person at the
Docket Operations Office between 9
a.m. and 5 p.m., Monday through
Friday, except Federal holidays. The AD
docket contains this AD, the European
Aviation Safety Agency (EASA) AD, any
VerDate Mar<15>2010
16:07 Feb 24, 2014
Jkt 232001
PO 00000
Frm 00003
Fmt 4700
Sfmt 4700
10333
incorporated-by-reference service
information, any comments received,
and other information. The street
address for the Docket Operations Office
(telephone 800–647–5527) is in the
ADDRESSES section. Comments will be
available in the AD docket shortly after
receipt.
For service information identified in
this AD, contact Agusta Westland,
Customer Support & Services, Via Per
Tornavento 15, 21019 Somma Lombardo
(VA) Italy, ATTN: Giovanni Cecchelli;
telephone 39–0331–711133; fax 39 0331
711180; or at https://
www.agustawestland.com/technicalbullettins. You may review the
referenced service information at the
FAA, Office of the Regional Counsel,
Southwest Region, 2601 Meacham
Blvd., Room 663, Fort Worth, Texas
76137.
FOR FURTHER INFORMATION CONTACT:
Robert Grant, Aviation Safety Engineer,
Safety Management Group, FAA, 2601
Meacham Blvd., Fort Worth, Texas
76137; telephone (817) 222–5110; email
robert.grant@faa.gov.
SUPPLEMENTARY INFORMATION:
Comments Invited
This AD is a final rule that involves
requirements affecting flight safety, and
we did not provide you with notice and
an opportunity to provide your
comments prior to it becoming effective.
However, we invite you to participate in
this rulemaking by submitting written
comments, data, or views. We also
invite comments relating to the
economic, environmental, energy, or
federalism impacts that resulted from
adopting this AD. The most helpful
comments reference a specific portion of
the AD, explain the reason for any
recommended change, and include
supporting data. To ensure the docket
does not contain duplicate comments,
commenters should send only one copy
of written comments, or if comments are
filed electronically, commenters should
submit them only one time. We will file
in the docket all comments that we
receive, as well as a report summarizing
each substantive public contact with
FAA personnel concerning this
rulemaking during the comment period.
We will consider all the comments we
receive and may conduct additional
rulemaking based on those comments.
Discussion
EASA, which is the Technical Agent
for the Member States of the European
Union, has issued EASA AD No. 2013–
0152–E, dated July 17, 2013, to correct
an unsafe condition for the Agusta
Model AB412 helicopter. EASA advises
E:\FR\FM\25FER1.SGM
25FER1
10334
Federal Register / Vol. 79, No. 37 / Tuesday, February 25, 2014 / Rules and Regulations
that two cases of cracks were reported
in the outer ring, part number (P/N)
412–010–407–105. A subsequent
investigation revealed that ‘‘fatigue
failure’’ caused the cracks. EASA states
that ‘‘this condition, if not detected and
corrected, could lead to the loss of main
rotor blade pitch control, possibly
resulting in loss of control of the
helicopter.’’ EASA calls for repetitive
inspections of the affected outer rings
for a crack and replacing the outer ring
with an improved outer ring, P/N 412–
010–107–117, if a crack is found. If the
outer ring has not been replaced, the AD
requires replacing each outer ring, P/N
412–010–407–105, with an improved
outer ring, P/N 412–010–107–117,
within 300 flight hours or 8 months,
whichever occurs first. Replacement
with an improved outer ring is
terminating action for the repetitive
inspections, EASA states.
FAA’s Determination
These helicopters have been approved
by the aviation authority of Italy and are
approved for operation in the United
States. Pursuant to our bilateral
agreement with Italy, EASA, its
technical representative, has notified us
of the unsafe condition described in the
EASA AD. We are issuing this AD
because we evaluated all information
provided by EASA and determined the
unsafe condition exists and is likely to
exist or develop on other helicopters of
these same type designs.
tkelley on DSK3SPTVN1PROD with RULES
Related Service Information
AgustaWestland S.p.A. issued Alert
Bollettino Tecnico No. 412–134 on July
15, 2013 (BT), to warn that two cases of
cracking in the outer ring, P/N 412–010–
407–105, have been reported, both
attributed to fatigue failure. The BT calls
for visually inspecting the outer ring for
a crack with a 5X magnifying glass and
a bright light. The BT added that the
inspection must occur within 5 flight
hours from when the BT was issued and
within intervals of 25 flight hours
thereafter until the outer ring is
replaced. The deadline to replace the
outer ring with outer ring, P/N 412–
010–407–117, is 300 flight hours or no
later than April 15, 2014, whichever
comes first. Outer ring, P/N 412–010–
407–105, was not to be used after April
15, 2014, the BT stated.
AD Requirements
This AD requires:
• Within 5 hours time-in-service
(TIS), and thereafter at intervals not to
exceed 25 hours TIS, visually inspecting
the swashplate outer ring, P/N 412–010–
407–105, for cracks, using a 5X
magnifying glass and a bright light. If a
VerDate Mar<15>2010
16:07 Feb 24, 2014
Jkt 232001
crack exists, before further flight,
removing the swashplate outer ring from
service.
• Within 300 hours TIS or 8 months,
whichever occurs first, removing the
swashplate outer ring, P/N 412–010–
407–105, from service.
• Not installing a swashplate outer
ring, P/N 412–010–407–105, on any
helicopter.
Differences Between This AD and the
EASA AD
This AD prohibits installation of a
swashplate outer ring, P/N 412–010–
407–105, while the EASA AD allows
installation of this part under certain
conditions.
Costs of Compliance
There are no costs of compliance with
this AD because there are no helicopters
with this type certificate on the U.S.
Registry.
FAA’s Justification and Determination
of the Effective Date
There are no helicopters with this
type certificate on the U.S. Registry.
Therefore, we believe it is unlikely that
we will receive any adverse comments
or useful information about this AD
from U.S. Operators.
Since an unsafe condition exists that
requires the immediate adoption of this
AD, we determined that notice and
opportunity for public comment before
issuing this AD are unnecessary because
there are none of these products on the
U.S. Registry and that good cause exists
for making this amendment effective in
less than 30 days.
Authority for This Rulemaking
Title 49 of the United States Code
specifies the FAA’s authority to issue
rules on aviation safety. Subtitle I,
section 106, describes the authority of
the FAA Administrator. ‘‘Subtitle VII:
Aviation Programs,’’ describes in more
detail the scope of the Agency’s
authority.
We are issuing this rulemaking under
the authority described in ‘‘Subtitle VII,
Part A, Subpart III, Section 44701:
General requirements.’’ Under that
section, Congress charges the FAA with
promoting safe flight of civil aircraft in
air commerce by prescribing regulations
for practices, methods, and procedures
the Administrator finds necessary for
safety in air commerce. This regulation
is within the scope of that authority
because it addresses an unsafe condition
that is likely to exist or develop on
products identified in this rulemaking
action.
PO 00000
Frm 00004
Fmt 4700
Sfmt 4700
Regulatory Findings
We determined that this AD will not
have federalism implications under
Executive Order 13132. This AD will
not have a substantial direct effect on
the States, on the relationship between
the national Government and the States,
or on the distribution of power and
responsibilities among the various
levels of government. For the reasons
discussed, I certify that this AD:
1. Is not a ‘‘significant regulatory
action’’ under Executive Order 12866;
2. Is not a ‘‘significant rule’’ under
DOT Regulatory Policies and Procedures
(44 FR 11034, February 26, 1979);
3. Will not affect intrastate aviation in
Alaska to the extent that it justifies
making a regulatory distinction; and
4. Will not have a significant
economic impact, positive or negative,
on a substantial number of small entities
under the criteria of the Regulatory
Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation
safety, Incorporation by reference,
Safety.
Adoption of the Amendment
Accordingly, under the authority
delegated to me by the Administrator,
the FAA amends 14 CFR part 39 as
follows:
PART 39—AIRWORTHINESS
DIRECTIVES
1. The authority citation for part 39
continues to read as follows:
■
Authority: 49 U.S.C. 106(g), 40113, 44701.
§ 39.13
[Amended]
2. The FAA amends § 39.13 by adding
the following new airworthiness
directive (AD):
■
2014–02–06 Agusta S.p.A.: Amendment 39–
17734; Docket No. FAA–2014–0035;
Directorate Identifier 2013–SW–036–AD.
(a) Applicability
This AD applies to Agusta S.p.A. Model
AB412 helicopters with a swashplate outer
ring part number (P/N) 412–010–407–105
installed, certificated in any category.
(b) Unsafe Condition
This AD defines the unsafe condition as a
crack in the main rotor swashplate outer ring.
This condition could result in the loss of
main rotor blade pitch control and
subsequent loss of control of the helicopter.
(c) Effective Date
This AD becomes effective March 12, 2014.
(d) Compliance
You are responsible for performing each
action required by this AD within the
specified compliance time unless it has
already been accomplished prior to that time.
E:\FR\FM\25FER1.SGM
25FER1
Federal Register / Vol. 79, No. 37 / Tuesday, February 25, 2014 / Rules and Regulations
(e) Required Actions
(1) Within 5 hours time in service (TIS),
and thereafter at intervals not to exceed 25
hours TIS, visually inspect the swashplate
outer ring, P/N 412–010–407–105, for a
crack, using a 5X or higher power magnifying
glass and a bright light and referring to
Figures 1 and 2 in AgustaWestland S.p.A.
Alert Bollettino Tecnico No. 412–134, dated
July 15, 2013. If a crack exists, before further
flight, remove the swashplate outer ring from
service.
(2) Within 300 hours TIS or 8 months,
whichever occurs first, remove the
swashplate outer ring, P/N 412–010–407–
105, from service.
(3) Do not install a swashplate outer ring,
P/N 412–010–407–105, on any helicopter.
availability of this material at the FAA, call
(817) 222–5110.
(5) You may view this service information
that is incorporated by reference at the
National Archives and Records
Administration (NARA). For information on
the availability of this material at NARA, call
(202) 741–6030, or go to: https://
www.archives.gov/federal-register/cfr/ibrlocations.html.
(f) Alternative Methods of Compliance
(AMOCs)
(1) The Manager, Safety Management
Group, FAA, may approve AMOCs for this
AD. Send your proposal to: Robert Grant,
Aviation Safety Engineer, Safety Management
Group, FAA, 2601 Meacham Blvd., Fort
Worth, Texas 76137; telephone (817) 222–
5110; email robert.grant@faa.gov.
(2) For operations conducted under a 14
CFR part 119 operating certificate or under
14 CFR part 91, subpart K, we suggest that
you notify your principal inspector, or
lacking a principal inspector, the manager of
the local flight standards district office or
certificate holding district office, before
operating any aircraft complying with this
AD through an AMOC.
BILLING CODE 4910–13–P
(g) Additional Information
The subject of this AD is addressed in the
European Aviation Safety Agency (EASA) AD
No. 2013–0152–E, dated July 17, 2013. You
may view the EASA AD on the Internet at
https://www.regulations.gov in Docket No.
FAA–2014–0035.
tkelley on DSK3SPTVN1PROD with RULES
(h) Subject
Joint Aircraft Service Component (JASC)
Code: 6230, Main Rotor Mast/Swashplate.
(i) Material Incorporated by Reference
(1) The Director of the Federal Register
approved the incorporation by reference
(IBR) of the service information listed in this
paragraph under 5 U.S.C. 552(a) and 1 CFR
part 51.
(2) You must use this service information
as applicable to do the actions required by
this AD, unless the AD specifies otherwise.
(i) AgustaWestland S.p.A. Alert Bollettino
Tecnico No. 412–134, dated July 15, 2013.
(ii) Reserved.
(3) For AgustaWestland service
information identified in this AD, contact
AgustaWestland, Customer Support &
Services, Via Per Tornavento 15, 21019
Somma Lombardo (VA) Italy, ATTN:
Giovanni Cecchelli; telephone 39- 0331–
711133; fax 39 0331 711180; or at https://
www.agustawestland.com/technicalbullettins.
(4) You may view this service information
that is incorporated by reference at the FAA,
Office of the Regional Counsel, Southwest
Region, 2601 Meacham Blvd., Room 663, Fort
Worth, Texas 76137. For information on the
VerDate Mar<15>2010
16:07 Feb 24, 2014
Jkt 232001
Issued in Fort Worth, Texas, on January 16,
2014.
Lance T. Gant,
Acting Directorate Manager, Rotorcraft
Directorate,
Aircraft Certification Service.
[FR Doc. 2014–01956 Filed 2–24–14; 8:45 am]
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA–2013–0699; Directorate
Identifier 2012–NM–198–AD; Amendment
39–17751; AD 2014–03–13]
RIN 2120–AA64
Airworthiness Directives; Fokker
Services B.V. Airplanes
Federal Aviation
Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule.
AGENCY:
We are adopting a new
airworthiness directive (AD) for certain
Fokker Services B.V. Model F.28 Mark
0070 and 0100 airplanes. This AD was
prompted by three reports of cracking in
the rear pressure bulkhead (RPBH) web.
This AD requires inspecting the RPBH
web for cracking, and repairing if
necessary. We are issuing this AD to
detect and correct cracking of the RPBH
web, which could result in in-flight
decompression of the airplane and
possible injury to the occupants.
DATES: This AD becomes effective April
1, 2014.
The Director of the Federal Register
approved the incorporation by reference
of certain publications listed in this AD
as of April 1, 2014.
ADDRESSES: You may examine the AD
on the Internet at https://
www.regulations.gov/
#!docketDetail;D=FAA-2013-0699; or in
person at the U.S. Department of
Transportation, Docket Operations, M–
30, West Building Ground Floor, Room
W12–140, 1200 New Jersey Avenue SE.,
Washington, DC.
For service information identified in
this AD, contact Fokker Services B.V.,
Technical Services Dept., P.O. Box
SUMMARY:
PO 00000
Frm 00005
Fmt 4700
Sfmt 4700
10335
1357, 2130 EL Hoofddorp, the
Netherlands; telephone +31 (0)88–6280–
350; fax +31 (0)88–6280–111; email
technicalservices@fokker.com; Internet
https://www.myfokkerfleet.com. You may
view this referenced service information
at the FAA, Transport Airplane
Directorate, 1601 Lind Avenue SW.,
Renton, WA. For information on the
availability of this material at the FAA,
call 425–227–1221.
FOR FURTHER INFORMATION CONTACT: Tom
Rodriguez, Aerospace Engineer,
International Branch, ANM–116,
Transport Airplane Directorate, FAA,
1601 Lind Avenue SW., Renton, WA
98057–3356; telephone (425) 227–1137;
fax (425) 227–1149.
SUPPLEMENTARY INFORMATION:
Discussion
We issued a notice of proposed
rulemaking (NPRM) to amend 14 CFR
part 39 by adding an AD that would
apply to certain Fokker Services B.V.
Model F.28 Mark 0070 and 0100
airplanes. The NPRM published in the
Federal Register on August 23, 2013 (78
FR 52465). The NPRM was prompted by
three reports of cracking in the rear
pressure bulkhead (RPBH) web. The
NPRM proposed to require inspecting
the RPBH web for cracking, and
repairing if necessary. We are issuing
this AD to detect and correct cracking of
the RPBH web, which could result in inflight decompression of the airplane and
possible injury to the occupants.
The European Aviation Safety Agency
(EASA), which is the Technical Agent
for the Member States of the European
Community, has issued EASA
Airworthiness Directive 2012–0219,
dated October 19, 2012 (referred to after
this as the Mandatory Continuing
Airworthiness Information, or ‘‘the
MCAI’’), to correct an unsafe condition
for the specified products. The MCAI
states:
Three reports have been received of a crack
in the rear pressure bulkhead (RPBH) web,
just below the horizontal beam XI between
buttock lines BL425L and BL425R, in the
centre web bay below the pressure relief
valves.
This condition, if not detected and
corrected, could result in an exponential
crack growth rate, possibly leading to failure
of the affected RPBH web, resulting in inflight decompression of the aeroplane and
possible injury to occupants.
A repetitive inspection requirement has
been published in issue 10 of Fokker Services
[Airworthiness Limitations Section] ALS
Report SE–623 under task number 534106–
00–05. The threshold to start this ALS-task is
30,000 [total] flight cycles (FC). However, it
is known that many aeroplanes have already
exceeded this threshold.
E:\FR\FM\25FER1.SGM
25FER1
Agencies
[Federal Register Volume 79, Number 37 (Tuesday, February 25, 2014)]
[Rules and Regulations]
[Pages 10333-10335]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-01956]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2014-0035; Directorate Identifier 2013-SW-036-AD;
Amendment 39-17734; AD 2014-02-06]
RIN 2120-AA64
Airworthiness Directives; Agusta S.p.A. Helicopters
AGENCY: Federal Aviation Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule; request for comments.
-----------------------------------------------------------------------
SUMMARY: We are adopting a new airworthiness directive (AD) for Agusta
S.p.A. (Agusta) Model AB412 helicopters. This AD requires visually
inspecting the main rotor swashplate outer ring (outer ring) for a
crack and replacing that outer ring if a crack exists. This AD is
prompted by two cases of cracks caused by fatigue on certain outer
rings. These actions are intended to prevent the failure of the outer
ring, which would lead to loss of main rotor blade pitch control and
subsequently loss of helicopter control.
DATES: This AD becomes effective March 12, 2014.
The Director of the Federal Register approved the incorporation by
reference of a certain document listed in this AD as of March 12, 2014.
We must receive comments on this AD by April 28, 2014.
ADDRESSES: You may send comments by any of the following methods:
Federal eRulemaking Docket: Go to https://www.regulations.gov. Follow the online instructions for sending your
comments electronically.
Fax: 202-493-2251.
Mail: Send comments to the U.S. Department of
Transportation, Docket Operations, M-30, West Building Ground Floor,
Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590-0001.
Hand Delivery: Deliver to the ``Mail'' address between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
Examining the AD Docket
You may examine the AD docket on the Internet at https://www.regulations.gov or in person at the Docket Operations Office
between 9 a.m. and 5 p.m., Monday through Friday, except Federal
holidays. The AD docket contains this AD, the European Aviation Safety
Agency (EASA) AD, any incorporated-by-reference service information,
any comments received, and other information. The street address for
the Docket Operations Office (telephone 800-647-5527) is in the
ADDRESSES section. Comments will be available in the AD docket shortly
after receipt.
For service information identified in this AD, contact Agusta
Westland, Customer Support & Services, Via Per Tornavento 15, 21019
Somma Lombardo (VA) Italy, ATTN: Giovanni Cecchelli; telephone 39-0331-
711133; fax 39 0331 711180; or at https://www.agustawestland.com/technical-bullettins. You may review the referenced service information
at the FAA, Office of the Regional Counsel, Southwest Region, 2601
Meacham Blvd., Room 663, Fort Worth, Texas 76137.
FOR FURTHER INFORMATION CONTACT: Robert Grant, Aviation Safety
Engineer, Safety Management Group, FAA, 2601 Meacham Blvd., Fort Worth,
Texas 76137; telephone (817) 222-5110; email robert.grant@faa.gov.
SUPPLEMENTARY INFORMATION:
Comments Invited
This AD is a final rule that involves requirements affecting flight
safety, and we did not provide you with notice and an opportunity to
provide your comments prior to it becoming effective. However, we
invite you to participate in this rulemaking by submitting written
comments, data, or views. We also invite comments relating to the
economic, environmental, energy, or federalism impacts that resulted
from adopting this AD. The most helpful comments reference a specific
portion of the AD, explain the reason for any recommended change, and
include supporting data. To ensure the docket does not contain
duplicate comments, commenters should send only one copy of written
comments, or if comments are filed electronically, commenters should
submit them only one time. We will file in the docket all comments that
we receive, as well as a report summarizing each substantive public
contact with FAA personnel concerning this rulemaking during the
comment period. We will consider all the comments we receive and may
conduct additional rulemaking based on those comments.
Discussion
EASA, which is the Technical Agent for the Member States of the
European Union, has issued EASA AD No. 2013-0152-E, dated July 17,
2013, to correct an unsafe condition for the Agusta Model AB412
helicopter. EASA advises
[[Page 10334]]
that two cases of cracks were reported in the outer ring, part number
(P/N) 412-010-407-105. A subsequent investigation revealed that
``fatigue failure'' caused the cracks. EASA states that ``this
condition, if not detected and corrected, could lead to the loss of
main rotor blade pitch control, possibly resulting in loss of control
of the helicopter.'' EASA calls for repetitive inspections of the
affected outer rings for a crack and replacing the outer ring with an
improved outer ring, P/N 412-010-107-117, if a crack is found. If the
outer ring has not been replaced, the AD requires replacing each outer
ring, P/N 412-010-407-105, with an improved outer ring, P/N 412-010-
107-117, within 300 flight hours or 8 months, whichever occurs first.
Replacement with an improved outer ring is terminating action for the
repetitive inspections, EASA states.
FAA's Determination
These helicopters have been approved by the aviation authority of
Italy and are approved for operation in the United States. Pursuant to
our bilateral agreement with Italy, EASA, its technical representative,
has notified us of the unsafe condition described in the EASA AD. We
are issuing this AD because we evaluated all information provided by
EASA and determined the unsafe condition exists and is likely to exist
or develop on other helicopters of these same type designs.
Related Service Information
AgustaWestland S.p.A. issued Alert Bollettino Tecnico No. 412-134
on July 15, 2013 (BT), to warn that two cases of cracking in the outer
ring, P/N 412-010-407-105, have been reported, both attributed to
fatigue failure. The BT calls for visually inspecting the outer ring
for a crack with a 5X magnifying glass and a bright light. The BT added
that the inspection must occur within 5 flight hours from when the BT
was issued and within intervals of 25 flight hours thereafter until the
outer ring is replaced. The deadline to replace the outer ring with
outer ring, P/N 412-010-407-117, is 300 flight hours or no later than
April 15, 2014, whichever comes first. Outer ring, P/N 412-010-407-105,
was not to be used after April 15, 2014, the BT stated.
AD Requirements
This AD requires:
Within 5 hours time-in-service (TIS), and thereafter at
intervals not to exceed 25 hours TIS, visually inspecting the
swashplate outer ring, P/N 412-010-407-105, for cracks, using a 5X
magnifying glass and a bright light. If a crack exists, before further
flight, removing the swashplate outer ring from service.
Within 300 hours TIS or 8 months, whichever occurs first,
removing the swashplate outer ring, P/N 412-010-407-105, from service.
Not installing a swashplate outer ring, P/N 412-010-407-
105, on any helicopter.
Differences Between This AD and the EASA AD
This AD prohibits installation of a swashplate outer ring, P/N 412-
010-407-105, while the EASA AD allows installation of this part under
certain conditions.
Costs of Compliance
There are no costs of compliance with this AD because there are no
helicopters with this type certificate on the U.S. Registry.
FAA's Justification and Determination of the Effective Date
There are no helicopters with this type certificate on the U.S.
Registry. Therefore, we believe it is unlikely that we will receive any
adverse comments or useful information about this AD from U.S.
Operators.
Since an unsafe condition exists that requires the immediate
adoption of this AD, we determined that notice and opportunity for
public comment before issuing this AD are unnecessary because there are
none of these products on the U.S. Registry and that good cause exists
for making this amendment effective in less than 30 days.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. ``Subtitle VII: Aviation
Programs,'' describes in more detail the scope of the Agency's
authority.
We are issuing this rulemaking under the authority described in
``Subtitle VII, Part A, Subpart III, Section 44701: General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
Regulatory Findings
We determined that this AD will not have federalism implications
under Executive Order 13132. This AD will not have a substantial direct
effect on the States, on the relationship between the national
Government and the States, or on the distribution of power and
responsibilities among the various levels of government. For the
reasons discussed, I certify that this AD:
1. Is not a ``significant regulatory action'' under Executive Order
12866;
2. Is not a ``significant rule'' under DOT Regulatory Policies and
Procedures (44 FR 11034, February 26, 1979);
3. Will not affect intrastate aviation in Alaska to the extent that
it justifies making a regulatory distinction; and
4. Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive (AD):
2014-02-06 Agusta S.p.A.: Amendment 39-17734; Docket No. FAA-2014-
0035; Directorate Identifier 2013-SW-036-AD.
(a) Applicability
This AD applies to Agusta S.p.A. Model AB412 helicopters with a
swashplate outer ring part number (P/N) 412-010-407-105 installed,
certificated in any category.
(b) Unsafe Condition
This AD defines the unsafe condition as a crack in the main
rotor swashplate outer ring. This condition could result in the loss
of main rotor blade pitch control and subsequent loss of control of
the helicopter.
(c) Effective Date
This AD becomes effective March 12, 2014.
(d) Compliance
You are responsible for performing each action required by this
AD within the specified compliance time unless it has already been
accomplished prior to that time.
[[Page 10335]]
(e) Required Actions
(1) Within 5 hours time in service (TIS), and thereafter at
intervals not to exceed 25 hours TIS, visually inspect the
swashplate outer ring, P/N 412-010-407-105, for a crack, using a 5X
or higher power magnifying glass and a bright light and referring to
Figures 1 and 2 in AgustaWestland S.p.A. Alert Bollettino Tecnico
No. 412-134, dated July 15, 2013. If a crack exists, before further
flight, remove the swashplate outer ring from service.
(2) Within 300 hours TIS or 8 months, whichever occurs first,
remove the swashplate outer ring, P/N 412-010-407-105, from service.
(3) Do not install a swashplate outer ring, P/N 412-010-407-105,
on any helicopter.
(f) Alternative Methods of Compliance (AMOCs)
(1) The Manager, Safety Management Group, FAA, may approve AMOCs
for this AD. Send your proposal to: Robert Grant, Aviation Safety
Engineer, Safety Management Group, FAA, 2601 Meacham Blvd., Fort
Worth, Texas 76137; telephone (817) 222-5110; email
robert.grant@faa.gov.
(2) For operations conducted under a 14 CFR part 119 operating
certificate or under 14 CFR part 91, subpart K, we suggest that you
notify your principal inspector, or lacking a principal inspector,
the manager of the local flight standards district office or
certificate holding district office, before operating any aircraft
complying with this AD through an AMOC.
(g) Additional Information
The subject of this AD is addressed in the European Aviation
Safety Agency (EASA) AD No. 2013-0152-E, dated July 17, 2013. You
may view the EASA AD on the Internet at https://www.regulations.gov
in Docket No. FAA-2014-0035.
(h) Subject
Joint Aircraft Service Component (JASC) Code: 6230, Main Rotor
Mast/Swashplate.
(i) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the service information listed
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless the AD specifies otherwise.
(i) AgustaWestland S.p.A. Alert Bollettino Tecnico No. 412-134,
dated July 15, 2013.
(ii) Reserved.
(3) For AgustaWestland service information identified in this
AD, contact AgustaWestland, Customer Support & Services, Via Per
Tornavento 15, 21019 Somma Lombardo (VA) Italy, ATTN: Giovanni
Cecchelli; telephone 39- 0331-711133; fax 39 0331 711180; or at
https://www.agustawestland.com/technical-bullettins.
(4) You may view this service information that is incorporated
by reference at the FAA, Office of the Regional Counsel, Southwest
Region, 2601 Meacham Blvd., Room 663, Fort Worth, Texas 76137. For
information on the availability of this material at the FAA, call
(817) 222-5110.
(5) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, call (202) 741-6030, or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.
Issued in Fort Worth, Texas, on January 16, 2014.
Lance T. Gant,
Acting Directorate Manager, Rotorcraft Directorate,
Aircraft Certification Service.
[FR Doc. 2014-01956 Filed 2-24-14; 8:45 am]
BILLING CODE 4910-13-P