Foreign-Trade Zone 203-Moses Lake, Washington; Authorization of Production Activity; AREVA Inc. (Fuel Rod Assemblies); Richland, Washington, 3175 [2014-00920]

Download as PDF Federal Register / Vol. 79, No. 12 / Friday, January 17, 2014 / Notices Foreign-Trade Zones Board Dated: January 10, 2014. Andrew McGilvray, Executive Secretary. [B–82–2013] [FR Doc. 2014–00918 Filed 1–16–14; 8:45 am] DEPARTMENT OF COMMERCE BILLING CODE 3510–DS–P Foreign-Trade Zone 203—Moses Lake, Washington; Authorization of Production Activity; AREVA Inc. (Fuel Rod Assemblies); Richland, Washington On August 29, 2013, the Port of Moses Lake Public Corporation, grantee of FTZ 203, submitted a notification of proposed production activity to the Foreign-Trade Zones (FTZ) Board on behalf of AREVA Inc., within Site 4 of FTZ 203, in Richland, Washington. The notification was processed in accordance with the regulations of the FTZ Board (15 CFR part 400), including notice in the Federal Register inviting public comment (78 FR 56655, 9–13– 2013). The FTZ Board has determined that no further review of the activity is warranted at this time. The production activity described in the notification is authorized, subject to the FTZ Act and the Board’s regulations, including Section 400.14. Dated: January 13, 2014. Andrew McGilvray, Executive Secretary. [FR Doc. 2014–00920 Filed 1–16–14; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–86–2013] Authorization of Production Activity; Foreign-Trade Subzone 38F; Benteler Automotive Corporation (Automotive Suspension and Body Components); Duncan, South Carolina On August 28, 2013, the South Carolina State Ports Authority, grantee of FTZ 38, submitted a notification of proposed production activity to the Foreign-Trade Zones (FTZ) Board on behalf of Benteler Automotive Corporation, operator of Subzone 38F, in Duncan, South Carolina. The notification was processed in accordance with the regulations of the FTZ Board (15 CFR part 400), including notice in the Federal Register inviting public comment (78 FR 58518–58519, 9–24–2013). The FTZ Board has determined that no further review of the activity is warranted at this time. The production activity described in the notification is authorized, subject to the FTZ Act and the Board’s regulations, including Section 400.14. Dated: January 13, 2014. Andrew McGilvray, Executive Secretary. Foreign-Trade Zones Board [B–85–2013] emcdonald on DSK67QTVN1PROD with NOTICES Foreign-Trade Zone 7—Mayaguez, Puerto Rico; Authorization of Production Activity; Patheon Puerto Rico, Inc. (Pharmaceutical Products); ´ Caguas and Manatı, Puerto Rico [FR Doc. 2014–00917 Filed 1–16–14; 8:45 am] On August 28, 2013, the Puerto Rico Industrial Development Company, grantee of FTZ 7, submitted a notification of proposed production activity to the Foreign-Trade Zones (FTZ) Board on behalf of Patheon Puerto Rico, Inc., within FTZ 7, Site 1 in Caguas and within Subzone 7L, in ´ Manatı, Puerto Rico. The notification was processed in accordance with the regulations of the FTZ Board (15 CFR part 400) including notice in the Federal Register inviting public comment (78 FR 58273, 09–23– 2013). The FTZ Board has determined that no further review of the activity is warranted at this time. The production activity described in the notification is authorized, subject to the FTZ Act and the Board’s regulations, including Section 400.14. Foreign-Trade Zones Board VerDate Mar<15>2010 17:00 Jan 16, 2014 Jkt 232001 BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE [B–1–2014] Notification of Proposed Production Activity; Mitsubishi Electric Power Products Inc.; Subzone 181B (Circuit Breakers); Sebring, Ohio Mitsubishi Electric Power Products Inc. (MEPPI), operator of Subzone 181B, submitted a notification of proposed production activity for its facility located in Sebring, Ohio. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on December 26, 2013. The facility is used for the production of high voltage, automatic circuit breakers. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the PO 00000 Frm 00013 Fmt 4703 Sfmt 4703 3175 specific foreign-status components and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt MEPPI from customs duty payments on the foreign status components used in export production. On its domestic sales, MEPPI would be able to choose the duty rates during customs entry procedures that apply to high voltage, automatic circuit breakers (2.0, 2.7%) for the foreign status inputs noted below. Customs duties also could possibly be deferred or reduced on foreign status production equipment. The components and materials sourced from abroad include: Oils; greases; glues; silicones; plastic pipes/ hoses/fittings/tapes/films/sheets/ containers; rubber pipes/hoses/gaskets/ containers; paper labels; metal flanges/ fittings/casters/name plates; screws; bolts; washers; rivets; cotter pins; springs; wire (steel, copper); cabinet hardware; copper fittings; aluminum struts/tanks; pumps; compressors; blowers; air conditioners; heat exchanger parts; filters; laser tools; portable computers and related parts; valves (reducing, transmission, check, safety); bearings (ball, roller, needle); universal joints; electric (AC/DC) motors and related parts; transformers; converters; inductors; parts of power supplies; resistors; capacitors; fuses; relays; contactors; connectors; alarm signaling indicators/equipment; electrical switches; surge suppressors; circuit and overload protectors; control panels; auxiliary switches; circuit breaker parts; interrupters; diodes; transistors; light emitting diodes; integrated circuit parts; insulated wire; coaxial cable; wiring harnesses; conductors; fiber optic cable; carbon electrodes; insulators (glass, ceramic); insulating fittings; temperature sensors; thermostats and related parts; monostats; voltage regulators; and, metal furniture (duty rate ranges from free to 6.7%; 5.25¢/bbl). Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary at the address below. The closing period for their receipt is February 26, 2014. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the FTZ Board’s Web site, which is accessible via www.trade.gov/ftz. E:\FR\FM\17JAN1.SGM 17JAN1

Agencies

[Federal Register Volume 79, Number 12 (Friday, January 17, 2014)]
[Notices]
[Page 3175]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-00920]



[[Page 3175]]

-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-82-2013]


Foreign-Trade Zone 203--Moses Lake, Washington; Authorization of 
Production Activity; AREVA Inc. (Fuel Rod Assemblies); Richland, 
Washington

    On August 29, 2013, the Port of Moses Lake Public Corporation, 
grantee of FTZ 203, submitted a notification of proposed production 
activity to the Foreign-Trade Zones (FTZ) Board on behalf of AREVA 
Inc., within Site 4 of FTZ 203, in Richland, Washington.
    The notification was processed in accordance with the regulations 
of the FTZ Board (15 CFR part 400), including notice in the Federal 
Register inviting public comment (78 FR 56655, 9-13-2013). The FTZ 
Board has determined that no further review of the activity is 
warranted at this time. The production activity described in the 
notification is authorized, subject to the FTZ Act and the Board's 
regulations, including Section 400.14.

    Dated: January 13, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014-00920 Filed 1-16-14; 8:45 am]
BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.