Notification of Proposed Production Activity; Mitsubishi Electric Power Products Inc.; Subzone 181B (Circuit Breakers); Sebring, Ohio, 3175-3176 [2014-00912]
Download as PDF
<![CDATA[
Federal Register / Vol. 79, No. 12 / Friday, January 17, 2014 / Notices
Foreign-Trade Zones Board
Dated: January 10, 2014.
Andrew McGilvray,
Executive Secretary.
[B–82–2013]
[FR Doc. 2014–00918 Filed 1–16–14; 8:45 am]
DEPARTMENT OF COMMERCE
BILLING CODE 3510–DS–P
Foreign-Trade Zone 203—Moses Lake,
Washington; Authorization of
Production Activity; AREVA Inc. (Fuel
Rod Assemblies); Richland,
Washington
On August 29, 2013, the Port of Moses
Lake Public Corporation, grantee of FTZ
203, submitted a notification of
proposed production activity to the
Foreign-Trade Zones (FTZ) Board on
behalf of AREVA Inc., within Site 4 of
FTZ 203, in Richland, Washington.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400), including
notice in the Federal Register inviting
public comment (78 FR 56655, 9–13–
2013). The FTZ Board has determined
that no further review of the activity is
warranted at this time. The production
activity described in the notification is
authorized, subject to the FTZ Act and
the Board’s regulations, including
Section 400.14.
Dated: January 13, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014–00920 Filed 1–16–14; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–86–2013]
Authorization of Production Activity;
Foreign-Trade Subzone 38F; Benteler
Automotive Corporation (Automotive
Suspension and Body Components);
Duncan, South Carolina
On August 28, 2013, the South
Carolina State Ports Authority, grantee
of FTZ 38, submitted a notification of
proposed production activity to the
Foreign-Trade Zones (FTZ) Board on
behalf of Benteler Automotive
Corporation, operator of Subzone 38F,
in Duncan, South Carolina.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400), including
notice in the Federal Register inviting
public comment (78 FR 58518–58519,
9–24–2013). The FTZ Board has
determined that no further review of the
activity is warranted at this time. The
production activity described in the
notification is authorized, subject to the
FTZ Act and the Board’s regulations,
including Section 400.14.
Dated: January 13, 2014.
Andrew McGilvray,
Executive Secretary.
Foreign-Trade Zones Board
[B–85–2013]
emcdonald on DSK67QTVN1PROD with NOTICES
Foreign-Trade Zone 7—Mayaguez,
Puerto Rico; Authorization of
Production Activity; Patheon Puerto
Rico, Inc. (Pharmaceutical Products);
´
Caguas and Manatı, Puerto Rico
[FR Doc. 2014–00917 Filed 1–16–14; 8:45 am]
On August 28, 2013, the Puerto Rico
Industrial Development Company,
grantee of FTZ 7, submitted a
notification of proposed production
activity to the Foreign-Trade Zones
(FTZ) Board on behalf of Patheon Puerto
Rico, Inc., within FTZ 7, Site 1 in
Caguas and within Subzone 7L, in
´
Manatı, Puerto Rico.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400) including
notice in the Federal Register inviting
public comment (78 FR 58273, 09–23–
2013). The FTZ Board has determined
that no further review of the activity is
warranted at this time. The production
activity described in the notification is
authorized, subject to the FTZ Act and
the Board’s regulations, including
Section 400.14.
Foreign-Trade Zones Board
VerDate Mar<15>2010
17:00 Jan 16, 2014
Jkt 232001
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
[B–1–2014]
Notification of Proposed Production
Activity; Mitsubishi Electric Power
Products Inc.; Subzone 181B (Circuit
Breakers); Sebring, Ohio
Mitsubishi Electric Power Products
Inc. (MEPPI), operator of Subzone 181B,
submitted a notification of proposed
production activity for its facility
located in Sebring, Ohio. The
notification conforming to the
requirements of the regulations of the
FTZ Board (15 CFR 400.22) was
received on December 26, 2013.
The facility is used for the production
of high voltage, automatic circuit
breakers. Pursuant to 15 CFR 400.14(b),
FTZ activity would be limited to the
PO 00000
Frm 00013
Fmt 4703
Sfmt 4703
3175
specific foreign-status components and
specific finished products described in
the submitted notification (as described
below) and subsequently authorized by
the FTZ Board.
Production under FTZ procedures
could exempt MEPPI from customs duty
payments on the foreign status
components used in export production.
On its domestic sales, MEPPI would be
able to choose the duty rates during
customs entry procedures that apply to
high voltage, automatic circuit breakers
(2.0, 2.7%) for the foreign status inputs
noted below. Customs duties also could
possibly be deferred or reduced on
foreign status production equipment.
The components and materials
sourced from abroad include: Oils;
greases; glues; silicones; plastic pipes/
hoses/fittings/tapes/films/sheets/
containers; rubber pipes/hoses/gaskets/
containers; paper labels; metal flanges/
fittings/casters/name plates; screws;
bolts; washers; rivets; cotter pins;
springs; wire (steel, copper); cabinet
hardware; copper fittings; aluminum
struts/tanks; pumps; compressors;
blowers; air conditioners; heat
exchanger parts; filters; laser tools;
portable computers and related parts;
valves (reducing, transmission, check,
safety); bearings (ball, roller, needle);
universal joints; electric (AC/DC) motors
and related parts; transformers;
converters; inductors; parts of power
supplies; resistors; capacitors; fuses;
relays; contactors; connectors; alarm
signaling indicators/equipment;
electrical switches; surge suppressors;
circuit and overload protectors; control
panels; auxiliary switches; circuit
breaker parts; interrupters; diodes;
transistors; light emitting diodes;
integrated circuit parts; insulated wire;
coaxial cable; wiring harnesses;
conductors; fiber optic cable; carbon
electrodes; insulators (glass, ceramic);
insulating fittings; temperature sensors;
thermostats and related parts;
monostats; voltage regulators; and,
metal furniture (duty rate ranges from
free to 6.7%; 5.25¢/bbl).
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is
February 26, 2014.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
E:\FR\FM\17JAN1.SGM
17JAN1
3176
Federal Register / Vol. 79, No. 12 / Friday, January 17, 2014 / Notices
For further information, contact Pierre
Duy at Pierre.Duy@trade.gov or (202)
482–1378.
Dated: January 10, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014–00912 Filed 1–16–14; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–570–941]
Certain Kitchen Appliance Shelving
and Racks From the People’s Republic
of China: Final Results and Partial
Rescission of Antidumping Duty
Administrative Review; 2011–2012
Enforcement and Compliance,
Formerly Import Administration,
International Trade Administration,
Department of Commerce.
AGENCY:
On September 4, 2013, the
Department of Commerce
(‘‘Department’’) published the
Preliminary Results 1 of the 2011–2012
administrative review of the
antidumping duty order on certain
kitchen appliance shelving and racks
from the People’s Republic of China:
(‘‘PRC’’). The period of review (‘‘POR’’)
is September 1, 2011, through August
31, 2012. We gave interested parties an
opportunity to comment on the
Preliminary Results, but we received
none. The final weighted-average
dumping margin for the exporter
covered by this administrative review,
New King Shan (Zhu Hai) Wire Co.,
Ltd., is listed in the ‘‘Final Results of
Review’’ section below.
SUMMARY:
DATES:
Effective Date: January 17, 2014.
FOR FURTHER INFORMATION CONTACT:
Emeka Chukwudebe, AD/CVD
Operations, Office 9, Enforcement and
Compliance, International Trade
Administration, Department of
Commerce, 14th Street and Constitution
Avenue NW., Washington, DC 20230;
telephone: (202) 482–0219.
SUPPLEMENTARY INFORMATION:
emcdonald on DSK67QTVN1PROD with NOTICES
Background
The Department has conducted this
administrative review in accordance
with section 751(a) of the Tariff Act of
1930, as amended (‘‘the Act’’).
1 See Certain Kitchen Appliance Shelving and
Racks From the People’s Republic of China:
Preliminary Results of Antidumping Duty
Administrative Review; 2011–2012, 78 FR 54450
(September 4, 2013) (‘‘Preliminary Results’’).
VerDate Mar<15>2010
17:00 Jan 16, 2014
Jkt 232001
Scope of the Order
The scope of the order consists of
shelving and racks for refrigerators,
freezers, combined refrigerator-freezers,
other refrigerating or freezing
equipment, cooking stoves, ranges, and
ovens (‘‘certain kitchen appliance
shelving and racks’’ or ‘‘the
merchandise under order’’). Certain
kitchen appliance shelving and racks
are defined as shelving, baskets, racks
(with or without extension slides, which
are carbon or stainless steel hardware
devices that are connected to shelving,
baskets, or racks to enable sliding), side
racks (which are welded wire support
structures for oven racks that attach to
the interior walls of an oven cavity that
does not include support ribs as a
design feature), and subframes (which
are welded wire support structures that
interface with formed support ribs
inside an oven cavity to support oven
rack assemblies utilizing extension
slides) with the following dimensions:
—shelving and racks with dimensions
ranging from 3 inches by 5 inches by
0.10 inch to 28 inches by 34 inches
by 6 inches; or
—baskets with dimensions ranging from
2 inches by 4 inches by 3 inches to
28 inches by 34 inches by 16 inches;
or
—side racks from 6 inches by 8 inches
by 0.1 inch to 16 inches by 30 inches
by 4 inches; or
—subframes from 6 inches by 10 inches
by 0.1 inch to 28 inches by 34 inches
by 6 inches.
The merchandise under the order is
comprised of carbon or stainless steel
wire ranging in thickness from 0.050
inch to 0.500 inch and may include
sheet metal of either carbon or stainless
steel ranging in thickness from 0.020
inch to 0.2 inch. The merchandise
under this order may be coated or
uncoated and may be formed and/or
welded. Excluded from the scope of this
order is shelving in which the support
surface is glass.
The merchandise subject to the order
is currently classifiable in the
Harmonized Tariff Schedule of the
United States (‘‘HTSUS’’) statistical
reporting numbers 8418.99.8050,
8418.99.8060, 7321.90.5000,
7321.90.6090, 8516.90.8000,
7321.90.6040, 8516.90.8010 and
8419.90.9520. Although the HTSUS
subheadings are provided for
convenience and customs purposes, the
written description of the scope of the
order is dispositive.
PRC-Wide Entity
Pursuant to 19 CFR 351.213(d)(1), the
Department will rescind an
PO 00000
Frm 00014
Fmt 4703
Sfmt 4703
administrative review, in whole or in
part, if a party that requested the review
withdraws the request within 90 days of
the date of publication of the initiation
notice of the requested review. As noted
in the Preliminary Results, Petitioners
timely requested an administrative
review for Jiangsu Weixi Group, Co.
(‘‘Weixi’’), a company that previously
has not received a separate rate in
earlier segments of this proceeding.
Petitioners were the only parties to
request an administrative review of
Weixi, and timely withdrew their
request for review of Weixi.2
In the Preliminary Results, because
the PRC-wide entity remained
potentially under review for the final
results of this administrative review, the
Department did not rescind this review
for Weixi, because it was part of the
PRC-wide entity. The PRC-wide entity
did not come under review for these
final results. Therefore, for the final
results the Department is rescinding this
review with respect to Weixi, who
remains part of the PRC-wide entity.
Final Results of the Review
The Department has made no changes
to the Preliminary Results. As a result of
our review, we determine that the
following dumping margin exists for the
period September 1, 2011, through
August 31, 2012:
Exporter
Weightedaverage
dumping
margin
(%)
New King Shan (Zhu Hai)
Co., Ltd.3 ...........................
0.00
Assessment
The Department will determine, and
U.S. Customs and Border Protection
(‘‘CBP’’) shall assess, antidumping
duties on all appropriate entries covered
by this review. The Department intends
to issue assessment instructions to CBP
15 days after the publication date of
these final results of this review. In
accordance with 19 CFR 351.212(b)(1),
we are calculating importer- (or
customer-) specific assessment rates for
the merchandise subject to this review.
For any individually examined
respondent whose weighted-average
2 See
Preliminary Results, 78 FR at 54450.
the Preliminary Results, the Department
found New King Shan affiliated with certain
entities and treated New King Shan and one
affiliated entity to be a single entity. Because we
have not made any changes to the Preliminary
Results, we will assign this rate to New King Shan
and its affiliated entity in this administrative
review. See Preliminary Results, and accompanying
Preliminary Decision Memorandum at pages 3–4.
3 In
E:\FR\FM\17JAN1.SGM
17JAN1
]]>Agencies
[Federal Register Volume 79, Number 12 (Friday, January 17, 2014)]
[Notices]
[Pages 3175-3176]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-00912]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-1-2014]
Notification of Proposed Production Activity; Mitsubishi Electric
Power Products Inc.; Subzone 181B (Circuit Breakers); Sebring, Ohio
Mitsubishi Electric Power Products Inc. (MEPPI), operator of
Subzone 181B, submitted a notification of proposed production activity
for its facility located in Sebring, Ohio. The notification conforming
to the requirements of the regulations of the FTZ Board (15 CFR 400.22)
was received on December 26, 2013.
The facility is used for the production of high voltage, automatic
circuit breakers. Pursuant to 15 CFR 400.14(b), FTZ activity would be
limited to the specific foreign-status components and specific finished
products described in the submitted notification (as described below)
and subsequently authorized by the FTZ Board.
Production under FTZ procedures could exempt MEPPI from customs
duty payments on the foreign status components used in export
production. On its domestic sales, MEPPI would be able to choose the
duty rates during customs entry procedures that apply to high voltage,
automatic circuit breakers (2.0, 2.7%) for the foreign status inputs
noted below. Customs duties also could possibly be deferred or reduced
on foreign status production equipment.
The components and materials sourced from abroad include: Oils;
greases; glues; silicones; plastic pipes/hoses/fittings/tapes/films/
sheets/containers; rubber pipes/hoses/gaskets/containers; paper labels;
metal flanges/fittings/casters/name plates; screws; bolts; washers;
rivets; cotter pins; springs; wire (steel, copper); cabinet hardware;
copper fittings; aluminum struts/tanks; pumps; compressors; blowers;
air conditioners; heat exchanger parts; filters; laser tools; portable
computers and related parts; valves (reducing, transmission, check,
safety); bearings (ball, roller, needle); universal joints; electric
(AC/DC) motors and related parts; transformers; converters; inductors;
parts of power supplies; resistors; capacitors; fuses; relays;
contactors; connectors; alarm signaling indicators/equipment;
electrical switches; surge suppressors; circuit and overload
protectors; control panels; auxiliary switches; circuit breaker parts;
interrupters; diodes; transistors; light emitting diodes; integrated
circuit parts; insulated wire; coaxial cable; wiring harnesses;
conductors; fiber optic cable; carbon electrodes; insulators (glass,
ceramic); insulating fittings; temperature sensors; thermostats and
related parts; monostats; voltage regulators; and, metal furniture
(duty rate ranges from free to 6.7%; 5.25[cent]/bbl).
Public comment is invited from interested parties. Submissions
shall be addressed to the FTZ Board's Executive Secretary at the
address below. The closing period for their receipt is February 26,
2014.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.
[[Page 3176]]
For further information, contact Pierre Duy at Pierre.Duy@trade.gov
or (202) 482-1378.
Dated: January 10, 2014.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2014-00912 Filed 1-16-14; 8:45 am]
BILLING CODE 3510-DS-P
