Airworthiness Directives; Dornier Luftfahrt GmbH Airplanes, 77380-77382 [2013-30491]

Download as PDF 77380 Federal Register / Vol. 78, No. 246 / Monday, December 23, 2013 / Proposed Rules outstanding voting securities of another passive Small Business that is the direct owner of at least 50% of the outstanding voting securities of the subsidiary company). * * * * * (c) Real Estate Businesses. (1) You are not permitted to finance any business classified under North American Industry Classification System (NAICS) codes 531110 (lessors of nonresidential buildings except miniwarehouses), 531120 (lessors of residential buildings and dwellings), 531190 (lessors of other real estate property), 237210 (land subdivision), or 236117 (new housing for-sale builders). You are not permitted to finance any business classified under NAICS codes 236118 (residential remodelers), 236210 (industrial building construction), or 236220 (commercial and institutional building construction), if such business is primarily engaged in construction or renovation of properties on its own account rather than as a hired contractor. You are permitted to finance a business classified under NAICS codes 531210 (offices of real estate agents and brokers), 531311 (residential property managers), 531312 (nonresidential property managers), 531320 (offices of real estate appraisers), or 531390 (other activities related to real estate), only if such business derives at least 80 percent of its revenue from nonAffiliate sources. (2) You are not permitted to finance a Small Business, regardless of NAICS classification, if the Financing is to be used to acquire or refinance real property, unless the Small Business: * * * * * ■ 5. Amend § 107.1150 by revising paragraphs (e)(1), (e)(2)(iii), and (e)(2)(iv) to read as follows: § 107.1150 Maximum amount of Leverage for a Section 301(c) Licensee. tkelley on DSK3SPTVN1PROD with PROPOSALS * * * * * (e) Additional Leverage based on Energy Saving Qualified Investments in Smaller Enterprises. (1) Subject to SBA’s credit policies, if you were licensed on or after October 1, 2008, you may have outstanding Leverage in excess of the amounts permitted by paragraphs (a) and (b) of this section in accordance with this paragraph (e). Any investment that you use as a basis to seek additional Leverage under this paragraph (e) cannot also be used to seek additional Leverage under paragraph (c) of this section. * * * * * (2) * * * (iii) Subtract from your outstanding Leverage the lesser of (e)(2)(i) or (e)(2)(ii). VerDate Mar<15>2010 17:16 Dec 20, 2013 Jkt 232001 (iv) If the amount calculated in paragraph (e)(2)(iii) is less than the maximum Leverage determined under paragraph (a) of this section, the difference between the two amounts equals your additional Leverage availability. Dated: November 14, 2013. Jeanne Hulit, Acting Administrator. [FR Doc. 2013–30504 Filed 12–20–13; 8:45 am] BILLING CODE 8025–01–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2013–1056; Directorate Identifier 2013–CE–046–AD] RIN 2120–AA64 Airworthiness Directives; Dornier Luftfahrt GmbH Airplanes Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Notice of proposed rulemaking (NPRM). AGENCY: We propose to adopt a new airworthiness directive (AD) for Dornier Luftfahrt GmbH Models Dornier 228– 100, 228–101, 228–200, 228–201, 228– 202, and 228–212 airplanes that would supersede AD 2006–11–19. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as chafed or damaged wiring on the flight deck overhead panels (5VE and 6VE). We are issuing this proposed AD to require actions to address the unsafe condition on these products. DATES: We must receive comments on this proposed AD by February 6, 2014. ADDRESSES: You may send comments by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: (202) 493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC 20590. • Hand Delivery: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., SUMMARY: PO 00000 Frm 00016 Fmt 4702 Sfmt 4702 Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service information identified in this proposed AD, contact RUAG Aerospace Services GmbH, Dornier 228 Customer Support, P.O. Box 1253, 82231 Wessling, Germany; telephone: +49 (0) 8153–30 2220; fax: +49 (0) 8153– 30 4258; email: custsupport.dornier228@ruag.com; Internet: https://www.ruag.com/en/ Aviation/Aviation_Home. You may review copies of the referenced service information at the FAA, Small Airplane Directorate, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at the FAA, call (816) 329–4148. Examining the AD Docket You may examine the AD docket on the Internet at https:// www.regulations.gov by searching and locating Docket Number FAA–2013– 1056; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this proposed AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Office (telephone (800) 647–5527) is in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt. FOR FURTHER INFORMATION CONTACT: Karl Schletzbaum, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329–4146; fax: (816) 329–4090; email: karl.schletzbaum@ faa.gov. SUPPLEMENTARY INFORMATION: Comments Invited We invite you to send any written relevant data, views, or arguments about this proposed AD. Send your comments to an address listed under the ADDRESSES section. Include ‘‘Docket No. FAA–2013–1056; Directorate Identifier 2013–CE–046–AD’’ at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of this proposed AD. We will consider all comments received by the closing date and may amend this proposed AD because of those comments. We will post all comments we receive, without change, to https:// regulations.gov, including any personal information you provide. We will also post a report summarizing each E:\FR\FM\23DEP1.SGM 23DEP1 Federal Register / Vol. 78, No. 246 / Monday, December 23, 2013 / Proposed Rules substantive verbal contact we receive about this proposed AD. tkelley on DSK3SPTVN1PROD with PROPOSALS Discussion On May 24, 2006, we issued AD 2006–11–19, Amendment 39–14624 (71 FR 32268; June 5, 2006). That AD required actions intended to address an unsafe condition on the products listed above. Since we issued AD 2006–11–19 (71 FR 32268; June 5, 2006), Dornier Luftfahrt GmbH changed the compliance time between repetitive inspections and incorporated those inspections into the Time Limits/ Maintenance Checks Manual (TLMCM). The European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Community, has issued AD No.: 2013– 0244, dated October 4, 2013 (referred to after this as ‘‘the MCAI’’), to correct an unsafe condition for the specified products. The MCAI states: RUAG Aerospace Services GmbH issued Time Limits/Maintenance Checks Manual (TLMCM) TM–TLMCM–090305–ALL, Revision 5 dated 20 March 2011 respectively TM–TLMCM–228–00002–150610, Revision 1 dated 03 March 2011, listing component life limits and describing maintenance instructions for the Dornier 228 type design. The Document TM–TLMCM–228–00002– 150610 is valid for airplane SN 8300 and up and other airplane SN modified according to CN–228–247. The instructions contained in that manual have been identified as mandatory actions for continued airworthiness. In 2005, chafed wiring was found on 5VE Panel due to lost adhesive of the TY–RAP holder and subsequent vibration of the cable harness. To address this potential unsafe condition, RUAG issued All Operators Telefax (AOT) No. AOT–228–24–028 and Temporary Revision (TR) 05–05 of the TLMCM introducing repetitive of the cockpit overhead panels 5VE and 6VE and, depending on findings, corrective actions(s). Subsequently, LBA issued AD D–2005–438 (EASA approval 2005–6430) to require those actions. Since that AD was issued, the instructions of TR 05–05 have been incorporated into TM–TLMCM–090305–ALL, Revision 5 dated 20 March 2011 respectively into TM– TLMCM–228–00002–150610, Revision 1 dated 03 March 2011. For the reasons described above, this AD retains the requirements of EASA AD D– 2005–438, which is superseded, and requires the implementation of the life limits and maintenance actions as specified in the TLMCM (TM–TLMCM–090305–ALL respectively TM–TLMCM–228–00002– 150610) for zone 321 overhead panels 5VE/ 6VE. You may examine the MCAI on the Internet at https://www.regulations.gov by searching for and locating it in Docket No. FAA–2013–1056. VerDate Mar<15>2010 17:16 Dec 20, 2013 Jkt 232001 Relevant Service Information Dornier Luftfahrt GmbH has issued RUAG Aerospace Services GmbH Dornier 228 TLMCM, TM–TLMCM– 090305–ALL, Revision 5, March 20, 2011; and RUAG Aerospace Services GmbH Dornier 228 Airplane Maintenance Manual, TM–AMM–228– 00014–080184, Revision 3, October 30, 2012. The actions described in this service information are intended to correct the unsafe condition identified in the MCAI. FAA’s Determination and Requirements of the Proposed AD This product has been approved by the aviation authority of another country, and is approved for operation in the United States. Pursuant to our bilateral agreement with this State of Design Authority, they have notified us of the unsafe condition described in the MCAI and service information referenced above. We are proposing this AD because we evaluated all information and determined the unsafe condition exists and is likely to exist or develop on other products of the same type design. Costs of Compliance We estimate that this proposed AD will affect 17 products of U.S. registry. We also estimate that it would take about 2 work-hours per product to comply with the basic requirements of this proposed AD. The average labor rate is $85 per work-hour. Based on these figures, we estimate the cost of the proposed AD on U.S. operators to be $2,890 or $170 per product. In addition, we estimate that any necessary follow-on actions would take about 3 work-hours and require parts costing $1,000, for a cost of $1,255 per product. We have no way of determining the number of products that may need these actions. Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. ‘‘Subtitle VII: Aviation Programs,’’ describes in more detail the scope of the Agency’s authority. We are issuing this rulemaking under the authority described in ‘‘Subtitle VII, Part A, Subpart III, Section 44701: General requirements.’’ Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for PO 00000 Frm 00017 Fmt 4702 Sfmt 4702 77381 safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings We determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify this proposed regulation: (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866, (2) Is not a ‘‘significant rule’’ under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation in Alaska, and (4) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. The Proposed Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows: PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by removing Amendment 39–14624 (71 FR 32268; June 5, 2006), and adding the following new AD: ■ Dornier Luftfahrt GmbH: Docket No. FAA– 2013–1056; Directorate Identifier 2013– CE–046–AD. (a) Comments Due Date We must receive comments by February 6, 2014. (b) Affected ADs This AD supersedes AD 2006–11–19, Amendment 39–14624 (71 FR 32268; June 5, 2006). E:\FR\FM\23DEP1.SGM 23DEP1 77382 Federal Register / Vol. 78, No. 246 / Monday, December 23, 2013 / Proposed Rules (c) Applicability This AD applies to Dornier Luftfahrt GmbH Dornier Models 228–100, 228–101, 228–200, 228–201, 228–202, and 228–212 airplanes, all serial numbers, certificated in any category. 14 CFR 43.9 (a)(1)(4) and 14 CFR 91.417(a)(2)(v). The record must be maintained as required by 14 CFR 91.173 or 135.439. DEPARTMENT OF TRANSPORTATION (g) Other FAA AD Provisions 14 CFR Part 39 (d) Subject Air Transport Association of America (ATA) Code 5: Time Limits. The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, Standards Office, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Karl Schletzbaum, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329–4146; fax: (816) 329–4090; email: karl.schletzbaum@faa.gov. Before using any approved AMOC on any airplane to which the AMOC applies, notify your appropriate principal inspector (PI) in the FAA Flight Standards District Office (FSDO), or lacking a PI, your local FSDO. (2) Airworthy Product: For any requirement in this AD to obtain corrective actions from a manufacturer or other source, use these actions if they are FAA-approved. Corrective actions are considered FAA-approved if they are approved by the State of Design Authority (or their delegated agent). You are required to assure the product is airworthy before it is returned to service. [Docket No. FAA–2013–0884; Directorate Identifier 2013–NE–31–AD] tkelley on DSK3SPTVN1PROD with PROPOSALS (e) Reason This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as chafed or damaged wiring on the flight deck overhead panels (5VE and 6VE). We are issuing this AD to prevent chafing and damage to the wiring in the flight deck overhead panels, which could result in short-circuiting of related wiring and possibly lead to electrical failure of affected systems and potential fire in the flight deck. (f) Actions and Compliance Unless already done, do the following actions in paragraphs (f)(1) through (f)(3) of this AD: (1) Within the next 600 hours time-inservice (TIS) after the effective date of this AD and repetitively thereafter at intervals not to exceed 600 hours TIS, inspect the wiring in the flight deck overhead panels, 5VE and 6VE, for chafing, damage, and/or incorrect installation (wire tie attachment holders) following the Zonal Inspection Program for zone 321 in section 5–22–10 of Chapter 05 in RUAG Aerospace Services GmbH Dornier 228 Time Limits/Maintenance Checks Manual (TLMCM), TM–TLMCM–090305– ALL, Revision 5, March 20, 2011; and subjects 31–10–07 and 31–10–08, dated November 25, 2009, of Chapter 31, Indicating/Recording Systems in RUAG Aerospace Services GmbH Dornier 228 Airplane Maintenance Manual, TM–AMM– 228–00014–080184, Revision 3, October 30, 2012. (2) If any chafed or damaged wires are found during any inspection required in paragraph (f)(1) of this AD, before further flight, repair the affected wire(s) and assure correct installation of the wiring in the flight deck overhead panels by reattaching or replacing the wire tie attachment holders and securing any loose wires to the wire tie attachment holders with plastic wire ties following subjects 31–10–07 and 31–10–08, dated November 25, 2009, of Chapter 31, Indicating/Recording Systems in RUAG Aerospace Services GmbH Dornier 228 Airplane Maintenance Manual, TM–AMM– 228–00014–080184, Revision 3, October 30, 2012. (3) To comply with the actions of this AD, you may insert a copy of this AD or a copy of the required actions of this AD into the airworthiness limitations section of the FAAapproved maintenance program (e.g., maintenance manual). This action may be done by an owner/operator (pilot) holding at least a private pilot certificate and must be entered into the airplane records showing compliance with this AD in accordance with VerDate Mar<15>2010 17:16 Dec 20, 2013 Jkt 232001 (h) Related Information Refer to MCAI European Aviation Safety Agency (EASA) AD No.: 2013–0244, dated October 4, 2013, for related information. You may examine the MCAI on the Internet at https://www.regulations.gov by searching for and locating it in Docket No. FAA–2013– 1056. For service information related to this AD, contact RUAG Aerospace Services GmbH, Dornier 228 Customer Support, P.O. Box 1253, 82231 Wessling, Germany; telephone: +49 (0) 8153–30 2220; fax: +49 (0) 8153–30 4258; email: custsupport.dornier228@ruag.com; Internet: https://www.ruag.com/en/Aviation/Aviation_ Home. You may review copies of the referenced service information at the FAA, Small Airplane Directorate, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at the FAA, call (816) 329–4148. Issued in Kansas City, Missouri, on December 13, 2013. Earl Lawrence, Manager, Small Airplane Directorate, Aircraft Certification Service. [FR Doc. 2013–30491 Filed 12–20–13; 8:45 am] BILLING CODE 4910–13–P PO 00000 Federal Aviation Administration RIN 2120–AA64 Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: We propose to adopt a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) BR700–715A1–30, BR700– 715B1–30, and BR700–715C1–30 turbofan engines. This proposed AD was prompted by a report of a partial debonding of the low pressure compressor (LPC) case ice impact panels during an engine shop visit. This proposed AD would require replacement of the LPC case ice impact panels. We are proposing this AD to prevent failure of the LPC case ice impact panels, which could result in damage to the engine and loss of control of the airplane. DATES: We must receive comments on this proposed AD by February 21, 2014. ADDRESSES: You may send comments by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov and follow the instructions for sending your comments electronically. • Mail: Docket Management Facility, U.S. Department of Transportation, 1200 New Jersey Avenue SE., West Building Ground Floor, Room W12–140, Washington, DC 20590–0001. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. • Fax: 202–493–2251. For service information identified in this AD, contact, contact Rolls-Royce Deutschland Ltd & Co KG, Eschenweg 11, Dahlewitz, 15827 BlankenfeldeMahlow, Germany; phone: 49 0 33– 7086–1883; fax: 49 0 33–7086–3276. You may view this service information at the FAA, Engine & Propeller Directorate, 12 New England Executive Park, Burlington, MA. For information on the availability of this material at the FAA, call 781–238–7125. SUMMARY: Examining the AD Docket You may examine the AD docket on the Internet at https:// Frm 00018 Fmt 4702 Sfmt 4702 E:\FR\FM\23DEP1.SGM 23DEP1

Agencies

[Federal Register Volume 78, Number 246 (Monday, December 23, 2013)]
[Proposed Rules]
[Pages 77380-77382]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-30491]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2013-1056; Directorate Identifier 2013-CE-046-AD]
RIN 2120-AA64


Airworthiness Directives; Dornier Luftfahrt GmbH Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: We propose to adopt a new airworthiness directive (AD) for 
Dornier Luftfahrt GmbH Models Dornier 228-100, 228-101, 228-200, 228-
201, 228-202, and 228-212 airplanes that would supersede AD 2006-11-19. 
This proposed AD results from mandatory continuing airworthiness 
information (MCAI) originated by an aviation authority of another 
country to identify and correct an unsafe condition on an aviation 
product. The MCAI describes the unsafe condition as chafed or damaged 
wiring on the flight deck overhead panels (5VE and 6VE). We are issuing 
this proposed AD to require actions to address the unsafe condition on 
these products.

DATES: We must receive comments on this proposed AD by February 6, 
2014.

ADDRESSES: You may send comments by any of the following methods:
     Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments.
     Fax: (202) 493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE., Washington, DC 20590.
     Hand Delivery: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE., Washington, DC 20590, between 9 a.m. and 5 p.m., 
Monday through Friday, except Federal holidays.
    For service information identified in this proposed AD, contact 
RUAG Aerospace Services GmbH, Dornier 228 Customer Support, P.O. Box 
1253, 82231 Wessling, Germany; telephone: +49 (0) 8153-30 2220; fax: 
+49 (0) 8153-30 4258; email: custsupport.dornier228@ruag.com; Internet: 
https://www.ruag.com/en/Aviation/Aviation_Home. You may review copies 
of the referenced service information at the FAA, Small Airplane 
Directorate, 901 Locust, Kansas City, Missouri 64106. For information 
on the availability of this material at the FAA, call (816) 329-4148.

Examining the AD Docket

    You may examine the AD docket on the Internet at https://www.regulations.gov by searching and locating Docket Number FAA-2013-
1056; or in person at the Docket Management Facility between 9 a.m. and 
5 p.m., Monday through Friday, except Federal holidays. The AD docket 
contains this proposed AD, the regulatory evaluation, any comments 
received, and other information. The street address for the Docket 
Office (telephone (800) 647-5527) is in the ADDRESSES section. Comments 
will be available in the AD docket shortly after receipt.

FOR FURTHER INFORMATION CONTACT: Karl Schletzbaum, Aerospace Engineer, 
FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, 
Missouri 64106; telephone: (816) 329-4146; fax: (816) 329-4090; email: 
karl.schletzbaum@faa.gov.

SUPPLEMENTARY INFORMATION:

Comments Invited

    We invite you to send any written relevant data, views, or 
arguments about this proposed AD. Send your comments to an address 
listed under the ADDRESSES section. Include ``Docket No. FAA-2013-1056; 
Directorate Identifier 2013-CE-046-AD'' at the beginning of your 
comments. We specifically invite comments on the overall regulatory, 
economic, environmental, and energy aspects of this proposed AD. We 
will consider all comments received by the closing date and may amend 
this proposed AD because of those comments.
    We will post all comments we receive, without change, to https://regulations.gov, including any personal information you provide. We 
will also post a report summarizing each

[[Page 77381]]

substantive verbal contact we receive about this proposed AD.

Discussion

    On May 24, 2006, we issued AD 2006-11-19, Amendment 39-14624 (71 FR 
32268; June 5, 2006). That AD required actions intended to address an 
unsafe condition on the products listed above.
    Since we issued AD 2006-11-19 (71 FR 32268; June 5, 2006), Dornier 
Luftfahrt GmbH changed the compliance time between repetitive 
inspections and incorporated those inspections into the Time Limits/
Maintenance Checks Manual (TLMCM).
    The European Aviation Safety Agency (EASA), which is the Technical 
Agent for the Member States of the European Community, has issued AD 
No.: 2013-0244, dated October 4, 2013 (referred to after this as ``the 
MCAI''), to correct an unsafe condition for the specified products. The 
MCAI states:

    RUAG Aerospace Services GmbH issued Time Limits/Maintenance 
Checks Manual (TLMCM) TM-TLMCM-090305-ALL, Revision 5 dated 20 March 
2011 respectively TM-TLMCM-228-00002-150610, Revision 1 dated 03 
March 2011, listing component life limits and describing maintenance 
instructions for the Dornier 228 type design. The Document TM-TLMCM-
228-00002-150610 is valid for airplane SN 8300 and up and other 
airplane SN modified according to CN-228-247. The instructions 
contained in that manual have been identified as mandatory actions 
for continued airworthiness.
    In 2005, chafed wiring was found on 5VE Panel due to lost 
adhesive of the TY-RAP holder and subsequent vibration of the cable 
harness.
    To address this potential unsafe condition, RUAG issued All 
Operators Telefax (AOT) No. AOT-228-24-028 and Temporary Revision 
(TR) 05-05 of the TLMCM introducing repetitive of the cockpit 
overhead panels 5VE and 6VE and, depending on findings, corrective 
actions(s). Subsequently, LBA issued AD D-2005-438 (EASA approval 
2005-6430) to require those actions.
    Since that AD was issued, the instructions of TR 05-05 have been 
incorporated into TM-TLMCM-090305-ALL, Revision 5 dated 20 March 
2011 respectively into TM-TLMCM-228-00002-150610, Revision 1 dated 
03 March 2011.
    For the reasons described above, this AD retains the 
requirements of EASA AD D-2005-438, which is superseded, and 
requires the implementation of the life limits and maintenance 
actions as specified in the TLMCM (TM-TLMCM-090305-ALL respectively 
TM-TLMCM-228-00002-150610) for zone 321 overhead panels 5VE/6VE.

    You may examine the MCAI on the Internet at https://www.regulations.gov by searching for and locating it in Docket No. FAA-
2013-1056.

Relevant Service Information

    Dornier Luftfahrt GmbH has issued RUAG Aerospace Services GmbH 
Dornier 228 TLMCM, TM-TLMCM-090305-ALL, Revision 5, March 20, 2011; and 
RUAG Aerospace Services GmbH Dornier 228 Airplane Maintenance Manual, 
TM-AMM-228-00014-080184, Revision 3, October 30, 2012. The actions 
described in this service information are intended to correct the 
unsafe condition identified in the MCAI.

FAA's Determination and Requirements of the Proposed AD

    This product has been approved by the aviation authority of another 
country, and is approved for operation in the United States. Pursuant 
to our bilateral agreement with this State of Design Authority, they 
have notified us of the unsafe condition described in the MCAI and 
service information referenced above. We are proposing this AD because 
we evaluated all information and determined the unsafe condition exists 
and is likely to exist or develop on other products of the same type 
design.

Costs of Compliance

    We estimate that this proposed AD will affect 17 products of U.S. 
registry. We also estimate that it would take about 2 work-hours per 
product to comply with the basic requirements of this proposed AD. The 
average labor rate is $85 per work-hour.
    Based on these figures, we estimate the cost of the proposed AD on 
U.S. operators to be $2,890 or $170 per product.
    In addition, we estimate that any necessary follow-on actions would 
take about 3 work-hours and require parts costing $1,000, for a cost of 
$1,255 per product. We have no way of determining the number of 
products that may need these actions.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. ``Subtitle VII: Aviation 
Programs,'' describes in more detail the scope of the Agency's 
authority.
    We are issuing this rulemaking under the authority described in 
``Subtitle VII, Part A, Subpart III, Section 44701: General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We determined that this proposed AD would not have federalism 
implications under Executive Order 13132. This proposed AD would not 
have a substantial direct effect on the States, on the relationship 
between the national Government and the States, or on the distribution 
of power and responsibilities among the various levels of government.
    For the reasons discussed above, I certify this proposed 
regulation:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979),
    (3) Will not affect intrastate aviation in Alaska, and
    (4) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Proposed Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by removing Amendment 39-14624 (71 FR 
32268; June 5, 2006), and adding the following new AD:

Dornier Luftfahrt GmbH: Docket No. FAA-2013-1056; Directorate 
Identifier 2013-CE-046-AD.

(a) Comments Due Date

    We must receive comments by February 6, 2014.

(b) Affected ADs

    This AD supersedes AD 2006-11-19, Amendment 39-14624 (71 FR 
32268; June 5, 2006).

[[Page 77382]]

(c) Applicability

    This AD applies to Dornier Luftfahrt GmbH Dornier Models 228-
100, 228-101, 228-200, 228-201, 228-202, and 228-212 airplanes, all 
serial numbers, certificated in any category.

(d) Subject

    Air Transport Association of America (ATA) Code 5: Time Limits.

(e) Reason

    This AD was prompted by mandatory continuing airworthiness 
information (MCAI) originated by an aviation authority of another 
country to identify and correct an unsafe condition on an aviation 
product. The MCAI describes the unsafe condition as chafed or 
damaged wiring on the flight deck overhead panels (5VE and 6VE). We 
are issuing this AD to prevent chafing and damage to the wiring in 
the flight deck overhead panels, which could result in short-
circuiting of related wiring and possibly lead to electrical failure 
of affected systems and potential fire in the flight deck.

(f) Actions and Compliance

    Unless already done, do the following actions in paragraphs 
(f)(1) through (f)(3) of this AD:
    (1) Within the next 600 hours time-in-service (TIS) after the 
effective date of this AD and repetitively thereafter at intervals 
not to exceed 600 hours TIS, inspect the wiring in the flight deck 
overhead panels, 5VE and 6VE, for chafing, damage, and/or incorrect 
installation (wire tie attachment holders) following the Zonal 
Inspection Program for zone 321 in section 5-22-10 of Chapter 05 in 
RUAG Aerospace Services GmbH Dornier 228 Time Limits/Maintenance 
Checks Manual (TLMCM), TM-TLMCM-090305-ALL, Revision 5, March 20, 
2011; and subjects 31-10-07 and 31-10-08, dated November 25, 2009, 
of Chapter 31, Indicating/Recording Systems in RUAG Aerospace 
Services GmbH Dornier 228 Airplane Maintenance Manual, TM-AMM-228-
00014-080184, Revision 3, October 30, 2012.
    (2) If any chafed or damaged wires are found during any 
inspection required in paragraph (f)(1) of this AD, before further 
flight, repair the affected wire(s) and assure correct installation 
of the wiring in the flight deck overhead panels by reattaching or 
replacing the wire tie attachment holders and securing any loose 
wires to the wire tie attachment holders with plastic wire ties 
following subjects 31-10-07 and 31-10-08, dated November 25, 2009, 
of Chapter 31, Indicating/Recording Systems in RUAG Aerospace 
Services GmbH Dornier 228 Airplane Maintenance Manual, TM-AMM-228-
00014-080184, Revision 3, October 30, 2012.
    (3) To comply with the actions of this AD, you may insert a copy 
of this AD or a copy of the required actions of this AD into the 
airworthiness limitations section of the FAA-approved maintenance 
program (e.g., maintenance manual). This action may be done by an 
owner/operator (pilot) holding at least a private pilot certificate 
and must be entered into the airplane records showing compliance 
with this AD in accordance with 14 CFR 43.9 (a)(1)(4) and 14 CFR 
91.417(a)(2)(v). The record must be maintained as required by 14 CFR 
91.173 or 135.439.

(g) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
Standards Office, FAA, has the authority to approve AMOCs for this 
AD, if requested using the procedures found in 14 CFR 39.19. Send 
information to ATTN: Karl Schletzbaum, Aerospace Engineer, FAA, 
Small Airplane Directorate, 901 Locust, Room 301, Kansas City, 
Missouri 64106; telephone: (816) 329-4146; fax: (816) 329-4090; 
email: karl.schletzbaum@faa.gov. Before using any approved AMOC on 
any airplane to which the AMOC applies, notify your appropriate 
principal inspector (PI) in the FAA Flight Standards District Office 
(FSDO), or lacking a PI, your local FSDO.
    (2) Airworthy Product: For any requirement in this AD to obtain 
corrective actions from a manufacturer or other source, use these 
actions if they are FAA-approved. Corrective actions are considered 
FAA-approved if they are approved by the State of Design Authority 
(or their delegated agent). You are required to assure the product 
is airworthy before it is returned to service.

(h) Related Information

    Refer to MCAI European Aviation Safety Agency (EASA) AD No.: 
2013-0244, dated October 4, 2013, for related information. You may 
examine the MCAI on the Internet at https://www.regulations.gov by 
searching for and locating it in Docket No. FAA-2013-1056. For 
service information related to this AD, contact RUAG Aerospace 
Services GmbH, Dornier 228 Customer Support, P.O. Box 1253, 82231 
Wessling, Germany; telephone: +49 (0) 8153-30 2220; fax: +49 (0) 
8153-30 4258; email: custsupport.dornier228@ruag.com; Internet: 
https://www.ruag.com/en/Aviation/Aviation_Home. You may review 
copies of the referenced service information at the FAA, Small 
Airplane Directorate, 901 Locust, Kansas City, Missouri 64106. For 
information on the availability of this material at the FAA, call 
(816) 329-4148.


    Issued in Kansas City, Missouri, on December 13, 2013.
Earl Lawrence,
Manager, Small Airplane Directorate, Aircraft Certification Service.
[FR Doc. 2013-30491 Filed 12-20-13; 8:45 am]
BILLING CODE 4910-13-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.