Incorporation by Reference; Accident Prevention Signs and Tags; Correction, 66641-66642 [2013-26338]
Download as PDF
<![CDATA[
Federal Register / Vol. 78, No. 215 / Wednesday, November 6, 2013 / Rules and Regulations
(d) Effective/applicability date. This
section applies to transfers or
assignments of derivative contracts on
or after July 22, 2011.
§ 1.1001–4T
■
[Removed]
Par. 3. Section 1.1001–4T is removed.
Heather C. Maloy,
Acting Deputy Commissioner for Services and
Enforcement.
Approved: October 29, 2013.
Mark Mazur,
Assistant Secretary of the Treasury (Tax
Policy).
[FR Doc. 2013–26575 Filed 11–5–13; 8:45 am]
BILLING CODE 4830–01–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
29 CFR Parts 1910 and 1926
[Docket No. OSHA–2013–0005]
RIN 1218–AC77
Incorporation by Reference; Accident
Prevention Signs and Tags; Correction
Occupational Safety and Health
Administration (OSHA), Department of
Labor.
ACTION: Correcting amendments.
AGENCY:
This document contains
corrections to the final regulations,
which were published in the Federal
Register of Thursday, June 13, 2013 (78
FR 35559). The regulations update
OSHA’s general industry and
construction signage standards by
adding references to the latest American
National Standards Institute (ANSI)
standards on specifications for accident
prevention signs and tags.
DATES: Effective on November 6, 2013.
FOR FURTHER INFORMATION CONTACT:
General information and press
inquiries: Frank Meilinger, OSHA Office
of Communications, Room N–3647, U.S.
Department of Labor, 200 Constitution
Ave. NW., Washington, DC 20210;
telephone: (202) 693–1999; email:
meilinger.francis2@dol.gov.
Technical inquiries: Kenneth
Stevanus, Directorate of Standards and
Guidance, Room N–3609, OSHA, U.S.
Department of Labor, 200 Constitution
Ave. NW., Washington, DC 20210;
telephone: (202) 693–2260; fax: (202)
693–1663; email: stevanus.ken@dol.gov.
SUPPLEMENTARY INFORMATION:
pmangrum on DSK3VPTVN1PROD with RULES
SUMMARY:
Background
The final regulations that are the
subject of these corrections superseded
VerDate Mar<15>2010
15:05 Nov 05, 2013
Jkt 232001
their predecessor regulations in 29 CFR
parts 1910 and 1926 on the effective
date, and affect employers required to
use accident prevention signs and tags
under the specified standards.
Need for Correction
As published, the final regulations
contain errors that may prove to be
misleading and ambiguous references to
illustrative figures in incorporated-byreference ANSI standards. Specifically,
the incorporation-by-reference
provisions in 29 CFR 1910.6(e)(66) and
(e)(67) and 1926.6(h)(28)–(h)(30)
misidentify the vendors and locations
where the public can purchase the
updated ANSI Z535 standards. In
addition, the references in 29 CFR
1926.200(b) and (c), ‘‘Accident
prevention signs and tags,’’ to figures in
ANSI Z535.2–2011 are ambiguous.
These references need to be clarified
because the figures they denote
illustrate sign specifications that
employers have the option of following.
List of Subjects in 29 CFR Parts 1910
and 1926
Construction, General industry,
Incorporation by reference, Safety,
Signs, Tags.
Accordingly, 29 CFR parts 1910 and
1926 are corrected by making the
following correcting amendments:
66641
Street, 4th Floor, New York, NY 10036;
telephone: 212–642–4980; Web site:
https://webstore.ansi.org/;
(ii) IHS Standards Store, 15 Inverness
Way East, Englewood, CO 80112;
telephone: 877–413–5184; Web site:
www.global.ihs.com; or
(iii) TechStreet Store, 3916 Ranchero
Dr., Ann Arbor, MI 48108; telephone:
877–699–9277; Web site:
www.techstreet.com.
(67) ANSI Z535.2–2011,
Environmental and Facility Safety
Signs, published September 15, 2011;
IBR approved for § 1910.261(c). Copies
available for purchase from the:
(i) American National Standards
Institute’s e-Standards Store, 25 W 43rd
Street, 4th Floor, New York, NY 10036;
telephone: 212–642–4980; Web site:
https://webstore.ansi.org/;
(ii) IHS Standards Store, 15 Inverness
Way East, Englewood, CO 80112;
telephone: 877–413–5184; Web site:
www.global.ihs.com; or
(iii) TechStreet Store, 3916 Ranchero
Dr., Ann Arbor, MI 48108; telephone:
877–699–9277; Web site:
www.techstreet.com.
*
*
*
*
*
PART 1926—SAFETY AND HEALTH
REGULATIONS FOR CONSTRUCTION
Subpart A—General
PART 1910—OCCUPATIONAL SAFETY
AND HEALTH STANDARDS
■
Subpart A—General
Authority: 40 U.S.C. 333; 29 U.S.C. 653,
655, 657; Secretary of Labor’s Order No. 12–
71 (36 FR 8754), 8–76 (41 FR 25059), 9–83
(48 FR 35736), 6–96 (62 FR 111), 5–2007 (72
FR 31160), 4–2010 (75 FR 55355), or 1–2012
(77 FR 3912), as applicable; and 29 CFR part
1911.
1. The authority citation for subpart A
continues to read as follows:
■
Authority: 29 U.S.C. 653, 655, 657;
Secretary of Labor’s Order No. 12–71 (36 FR
8754), 8–76 (41 FR 25059), 9–83 (48 FR
35736), 1–90 (55 FR 9033), 6–96 (62 FR 111),
3–2000 (65 FR 50017), 5–2002 (67 FR 65008),
5–2007 (72 FR 31159), 4–2010 (75 FR 55355),
or 1–2012 (77 FR 3912), as applicable.
Sections 1910.6, 1910.7, 1910.8 and 1910.9
also issued under 29 CFR 1911. Section
1910.7(f) also issued under 31 U.S.C. 9701,
29 U.S.C. 9a, 5 U.S.C. 553; Public Law 106–
113 (113 Stat. 1501A–222); Pub. L. 11–8 and
111–317; and OMB Circular A–25 (dated July
8, 1993) (58 FR 38142, July 15, 1993).
2. In § 1910.6, revise paragraphs
(e)(66) and (e)(67) to read as follows:
■
§ 1910.6
Incorporation by reference.
*
*
*
*
*
(e) * * *
(66) ANSI Z535.1–2006 (R2011),
Safety Colors, reaffirmed July 19, 2011;
IBR approved for §§ 1910.97(a) and
1910.145(d). Copies available for
purchase from the:
(i) American National Standards
Institute’s e-Standards Store, 25 W 43rd
PO 00000
Frm 00021
Fmt 4700
Sfmt 4700
3. The authority citation for subpart A
continues to read as follows:
4. In § 1926.6, revise paragraphs
(h)(28), (h)(29), and (h)(30) to read as
follows:
■
§ 1926.6
Incorporation by reference.
*
*
*
*
*
(h) * * *
(28) ANSI Z535.1–2006 (R2011),
Safety Colors, reaffirmed July 19, 2011;
IBR approved for § 1926.200(c). Copies
available for purchase from the:
(i) American National Standards
Institute’s e-Standards Store, 25 W 43rd
Street, 4th Floor, New York, NY 10036;
telephone: 212–642–4980; Web site:
https://webstore.ansi.org/;
(ii) IHS Standards Store, 15 Inverness
Way East, Englewood, CO 80112;
telephone: 877–413–5184; Web site:
www.global.ihs.com; or
(iii) TechStreet Store, 3916 Ranchero
Dr., Ann Arbor, MI 48108; telephone:
877–699–9277; Web site:
www.techstreet.com.
E:\FR\FM\06NOR1.SGM
06NOR1
66642
Federal Register / Vol. 78, No. 215 / Wednesday, November 6, 2013 / Rules and Regulations
(29) ANSI Z535.2–2011,
Environmental and Facility Safety
Signs, published September 15, 2011;
IBR approved for § 1926.200(b), (c), and
(i). Copies available for purchase from
the:
(i) American National Standards
Institute’s e-Standards Store, 25 W 43rd
Street, 4th Floor, New York, NY 10036;
telephone: 212–642–4980; Web site:
https://webstore.ansi.org/;
(ii) IHS Standards Store, 15 Inverness
Way East, Englewood, CO 80112;
telephone: 877–413–5184; Web site:
www.global.ihs.com; or
(iii) TechStreet Store, 3916 Ranchero
Dr., Ann Arbor, MI 48108; telephone:
877–699–9277; Web site:
www.techstreet.com.
(30) ANSI Z535.5–2011, Safety Tags
and Barricade Tapes (for Temporary
Hazards), published September 15,
2011, including Errata, November 14,
2011; IBR approved for § 1926.200(h)
and (i). Copies available for purchase
from the:
(i) American National Standards
Institute’s e-Standards Store, 25 W 43rd
Street, 4th Floor, New York, NY 10036;
telephone: 212–642–4980; Web site:
https://webstore.ansi.org/;
(ii) IHS Standards Store, 15 Inverness
Way East, Englewood, CO 80112;
telephone: 877–413–5184; Web site:
www.global.ihs.com; or
(iii) TechStreet Store, 3916 Ranchero
Dr., Ann Arbor, MI 48108; telephone:
877–699–9277; Web site:
www.techstreet.com.
*
*
*
*
*
Subpart G—Signs, Signals, and
Barricades
5. The authority citation for subpart G
continues to read as follows:
■
Authority: 40 U.S.C. 333; 29 U.S.C. 653,
655, 657; Secretary of Labor’s Order No. 12–
71 (36 FR 8754), 8–76 (41 FR 25059), 9–83
(48 FR 35736), 3–2000 (65 FR 50017), 5–2002
(67 FR 65008), 5–2007 (72 FR 31159), 4–2010
(75 FR 55355), or 1–2012 (77 FR 3912), as
applicable; and 29 CFR part 1911.
6. In § 1926.200, revise paragraphs
(b)(1) and (c)(1) to read as follows:
■
§ 1926.200
tags.
Accident prevention signs and
pmangrum on DSK3VPTVN1PROD with RULES
*
*
*
*
*
(b) Danger signs. (1) Danger signs
shall be used only where an immediate
hazard exists, and shall follow the
specifications illustrated in Figure 1 of
ANSI Z35.1–1968 or in Figures 1 to 13
of ANSI Z535.2–2011, incorporated by
reference in § 1926.6.
*
*
*
*
*
(c) Caution signs. (1) Caution signs
shall be used only to warn against
VerDate Mar<15>2010
15:05 Nov 05, 2013
Jkt 232001
potential hazards or to caution against
unsafe practices, and shall follow the
specifications illustrated in Figure 4 of
ANSI Z35.1–1968 or in Figures 1 to 13
of ANSI Z535.2–2011, incorporated by
reference in § 1926.6.
*
*
*
*
*
Signed at Washington, DC, on October 30,
2013.
David Michaels,
Assistant Secretary of Labor for Occupational
Safety and Health.
[FR Doc. 2013–26338 Filed 11–5–13; 8:45 am]
BILLING CODE 4510–26–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
29 CFR Parts 1910 and 1926
[Docket No. OSHA–2013–0005]
RIN 1218–AC77
Updating OSHA Standards Based on
National Consensus Standards;
Signage
Occupational Safety and Health
Administration (OSHA), Department of
Labor.
ACTION: Final rule; confirmation of
effective date.
AGENCY:
On June 13, 2013, OSHA
published in the Federal Register (78
FR 35559) a direct final rule that revised
its signage standards for general
industry and construction by updating
the references to national consensus
standards approved by the American
National Standards Institute, a
clearinghouse that verifies that the
criteria for approval of consensus
standards have been met. OSHA stated
in that Federal Register notice that it
would withdraw the companion
proposed rule and confirm the effective
date of the direct final rule if the Agency
received no significant adverse
comments on the direct final rule. Since
OSHA received no such significant
adverse comments, the Agency now
confirms that the direct final rule
became effective as a final rule on
September 11, 2013.
DATES: The direct final rule published
on June 13, 2013 (78 FR 35559), became
effective as a final rule on September 11,
2013. For the purposes of judicial
review, OSHA considers November 6,
2013, the date of issuance of the final
rule.
SUMMARY:
In compliance with 28
U.S.C. 2112(a), OSHA designates the
Associate Solicitor of Labor for
ADDRESSES:
PO 00000
Frm 00022
Fmt 4700
Sfmt 4700
Occupational Safety and Health as the
recipient of petitions for review of the
final standard. Contact Joseph M.
Woodward, Associate Solicitor, at the
Office of the Solicitor, Room S–4004,
U.S. Department of Labor, 200
Constitution Avenue NW., Washington,
DC 20210; telephone: (202) 693–5445;
email: woodward.joseph@dol.gov.
FOR FURTHER INFORMATION CONTACT:
General information and press
inquiries: Frank Meilinger, Director,
OSHA Office of Communications, Room
N–3647, U.S. Department of Labor, 200
Constitution Avenue NW., Washington,
DC 20210; telephone: (202) 693–1999;
email: meilinger.francis2@dol.gov.
Technical information: Ken Stevanus,
Directorate of Standards and Guidance,
Room N–3609, OSHA, U.S. Department
of Labor, 200 Constitution Avenue NW.,
Washington, DC 20210; telephone: (202)
693–2260; fax: (202) 693–1663; email:
stevanus.ken@dol.gov.
SUPPLEMENTARY INFORMATION:
Copies of this Federal Register
notice: Electronic copies of this Federal
Register notice are available at https://
www.regulations.gov. This Federal
Register notice, as well as news releases
and other relevant information, also are
available at OSHA’s Web page at
https://www.osha.gov.
Confirmation of the effective date: On
June 13, 2013, OSHA published a direct
final rule (DFR) in the Federal Register
that revised its signage standards for
general industry at 29 CFR 1910.97,
1910.145, and 1910.261, and
construction at 29 CFR 1926.200, by
updating references to the American
National Standards Institute (ANSI)
signage protection standards (see 78 FR
35559). Specifically, the DFR updated
the signage references in OSHA’s
existing general industry and
construction standards, including
references to ANSI Z53.1–1967 (Safety
Color Code for Marking Physical
Hazards), Z35.1–1968 (Specifications for
Accident Prevention Signs), and Z35.2–
1968 (Specifications for Accident
Prevention Tags), by adding references
to the latest ANSI standards, including
ANSI Z535.1–2006 (R2011) (Safety
Colors), Z535.2–2011 (Environmental
and Facility Safety Signs), and Z535.5–
2011 (Safety Tags and Barricade Tapes
(for Temporary Hazards)). Thus, the
DFR allowed employers to follow either
the updated ANSI standards or the older
ANSI signage standards already
referenced in OSHA’s existing general
industry and construction standards.
The DFR also incorporated by
reference Part VI of the Manual of
Uniform Traffic Control Devices, 1988
Edition, Revision 3, into 29 CFR 1926.6,
E:\FR\FM\06NOR1.SGM
06NOR1
]]>Agencies
[Federal Register Volume 78, Number 215 (Wednesday, November 6, 2013)]
[Rules and Regulations]
[Pages 66641-66642]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-26338]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
29 CFR Parts 1910 and 1926
[Docket No. OSHA-2013-0005]
RIN 1218-AC77
Incorporation by Reference; Accident Prevention Signs and Tags;
Correction
AGENCY: Occupational Safety and Health Administration (OSHA),
Department of Labor.
ACTION: Correcting amendments.
-----------------------------------------------------------------------
SUMMARY: This document contains corrections to the final regulations,
which were published in the Federal Register of Thursday, June 13, 2013
(78 FR 35559). The regulations update OSHA's general industry and
construction signage standards by adding references to the latest
American National Standards Institute (ANSI) standards on
specifications for accident prevention signs and tags.
DATES: Effective on November 6, 2013.
FOR FURTHER INFORMATION CONTACT:
General information and press inquiries: Frank Meilinger, OSHA
Office of Communications, Room N-3647, U.S. Department of Labor, 200
Constitution Ave. NW., Washington, DC 20210; telephone: (202) 693-1999;
email: meilinger.francis2@dol.gov.
Technical inquiries: Kenneth Stevanus, Directorate of Standards and
Guidance, Room N-3609, OSHA, U.S. Department of Labor, 200 Constitution
Ave. NW., Washington, DC 20210; telephone: (202) 693-2260; fax: (202)
693-1663; email: stevanus.ken@dol.gov.
SUPPLEMENTARY INFORMATION:
Background
The final regulations that are the subject of these corrections
superseded their predecessor regulations in 29 CFR parts 1910 and 1926
on the effective date, and affect employers required to use accident
prevention signs and tags under the specified standards.
Need for Correction
As published, the final regulations contain errors that may prove
to be misleading and ambiguous references to illustrative figures in
incorporated-by-reference ANSI standards. Specifically, the
incorporation-by-reference provisions in 29 CFR 1910.6(e)(66) and
(e)(67) and 1926.6(h)(28)-(h)(30) misidentify the vendors and locations
where the public can purchase the updated ANSI Z535 standards. In
addition, the references in 29 CFR 1926.200(b) and (c), ``Accident
prevention signs and tags,'' to figures in ANSI Z535.2-2011 are
ambiguous. These references need to be clarified because the figures
they denote illustrate sign specifications that employers have the
option of following.
List of Subjects in 29 CFR Parts 1910 and 1926
Construction, General industry, Incorporation by reference, Safety,
Signs, Tags.
Accordingly, 29 CFR parts 1910 and 1926 are corrected by making the
following correcting amendments:
PART 1910--OCCUPATIONAL SAFETY AND HEALTH STANDARDS
Subpart A--General
0
1. The authority citation for subpart A continues to read as follows:
Authority: 29 U.S.C. 653, 655, 657; Secretary of Labor's Order
No. 12-71 (36 FR 8754), 8-76 (41 FR 25059), 9-83 (48 FR 35736), 1-90
(55 FR 9033), 6-96 (62 FR 111), 3-2000 (65 FR 50017), 5-2002 (67 FR
65008), 5-2007 (72 FR 31159), 4-2010 (75 FR 55355), or 1-2012 (77 FR
3912), as applicable.
Sections 1910.6, 1910.7, 1910.8 and 1910.9 also issued under 29
CFR 1911. Section 1910.7(f) also issued under 31 U.S.C. 9701, 29
U.S.C. 9a, 5 U.S.C. 553; Public Law 106-113 (113 Stat. 1501A-222);
Pub. L. 11-8 and 111-317; and OMB Circular A-25 (dated July 8, 1993)
(58 FR 38142, July 15, 1993).
0
2. In Sec. 1910.6, revise paragraphs (e)(66) and (e)(67) to read as
follows:
Sec. 1910.6 Incorporation by reference.
* * * * *
(e) * * *
(66) ANSI Z535.1-2006 (R2011), Safety Colors, reaffirmed July 19,
2011; IBR approved for Sec. Sec. 1910.97(a) and 1910.145(d). Copies
available for purchase from the:
(i) American National Standards Institute's e-Standards Store, 25 W
43rd Street, 4th Floor, New York, NY 10036; telephone: 212-642-4980;
Web site: https://webstore.ansi.org/;
(ii) IHS Standards Store, 15 Inverness Way East, Englewood, CO
80112; telephone: 877-413-5184; Web site: www.global.ihs.com; or
(iii) TechStreet Store, 3916 Ranchero Dr., Ann Arbor, MI 48108;
telephone: 877-699-9277; Web site: www.techstreet.com.
(67) ANSI Z535.2-2011, Environmental and Facility Safety Signs,
published September 15, 2011; IBR approved for Sec. 1910.261(c).
Copies available for purchase from the:
(i) American National Standards Institute's e-Standards Store, 25 W
43rd Street, 4th Floor, New York, NY 10036; telephone: 212-642-4980;
Web site: https://webstore.ansi.org/;
(ii) IHS Standards Store, 15 Inverness Way East, Englewood, CO
80112; telephone: 877-413-5184; Web site: www.global.ihs.com; or
(iii) TechStreet Store, 3916 Ranchero Dr., Ann Arbor, MI 48108;
telephone: 877-699-9277; Web site: www.techstreet.com.
* * * * *
PART 1926--SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION
Subpart A--General
0
3. The authority citation for subpart A continues to read as follows:
Authority: 40 U.S.C. 333; 29 U.S.C. 653, 655, 657; Secretary of
Labor's Order No. 12-71 (36 FR 8754), 8-76 (41 FR 25059), 9-83 (48
FR 35736), 6-96 (62 FR 111), 5-2007 (72 FR 31160), 4-2010 (75 FR
55355), or 1-2012 (77 FR 3912), as applicable; and 29 CFR part 1911.
0
4. In Sec. 1926.6, revise paragraphs (h)(28), (h)(29), and (h)(30) to
read as follows:
Sec. 1926.6 Incorporation by reference.
* * * * *
(h) * * *
(28) ANSI Z535.1-2006 (R2011), Safety Colors, reaffirmed July 19,
2011; IBR approved for Sec. 1926.200(c). Copies available for purchase
from the:
(i) American National Standards Institute's e-Standards Store, 25 W
43rd Street, 4th Floor, New York, NY 10036; telephone: 212-642-4980;
Web site: https://webstore.ansi.org/;
(ii) IHS Standards Store, 15 Inverness Way East, Englewood, CO
80112; telephone: 877-413-5184; Web site: www.global.ihs.com; or
(iii) TechStreet Store, 3916 Ranchero Dr., Ann Arbor, MI 48108;
telephone: 877-699-9277; Web site: www.techstreet.com.
[[Page 66642]]
(29) ANSI Z535.2-2011, Environmental and Facility Safety Signs,
published September 15, 2011; IBR approved for Sec. 1926.200(b), (c),
and (i). Copies available for purchase from the:
(i) American National Standards Institute's e-Standards Store, 25 W
43rd Street, 4th Floor, New York, NY 10036; telephone: 212-642-4980;
Web site: https://webstore.ansi.org/;
(ii) IHS Standards Store, 15 Inverness Way East, Englewood, CO
80112; telephone: 877-413-5184; Web site: www.global.ihs.com; or
(iii) TechStreet Store, 3916 Ranchero Dr., Ann Arbor, MI 48108;
telephone: 877-699-9277; Web site: www.techstreet.com.
(30) ANSI Z535.5-2011, Safety Tags and Barricade Tapes (for
Temporary Hazards), published September 15, 2011, including Errata,
November 14, 2011; IBR approved for Sec. 1926.200(h) and (i). Copies
available for purchase from the:
(i) American National Standards Institute's e-Standards Store, 25 W
43rd Street, 4th Floor, New York, NY 10036; telephone: 212-642-4980;
Web site: https://webstore.ansi.org/;
(ii) IHS Standards Store, 15 Inverness Way East, Englewood, CO
80112; telephone: 877-413-5184; Web site: www.global.ihs.com; or
(iii) TechStreet Store, 3916 Ranchero Dr., Ann Arbor, MI 48108;
telephone: 877-699-9277; Web site: www.techstreet.com.
* * * * *
Subpart G--Signs, Signals, and Barricades
0
5. The authority citation for subpart G continues to read as follows:
Authority: 40 U.S.C. 333; 29 U.S.C. 653, 655, 657; Secretary of
Labor's Order No. 12-71 (36 FR 8754), 8-76 (41 FR 25059), 9-83 (48
FR 35736), 3-2000 (65 FR 50017), 5-2002 (67 FR 65008), 5-2007 (72 FR
31159), 4-2010 (75 FR 55355), or 1-2012 (77 FR 3912), as applicable;
and 29 CFR part 1911.
0
6. In Sec. 1926.200, revise paragraphs (b)(1) and (c)(1) to read as
follows:
Sec. 1926.200 Accident prevention signs and tags.
* * * * *
(b) Danger signs. (1) Danger signs shall be used only where an
immediate hazard exists, and shall follow the specifications
illustrated in Figure 1 of ANSI Z35.1-1968 or in Figures 1 to 13 of
ANSI Z535.2-2011, incorporated by reference in Sec. 1926.6.
* * * * *
(c) Caution signs. (1) Caution signs shall be used only to warn
against potential hazards or to caution against unsafe practices, and
shall follow the specifications illustrated in Figure 4 of ANSI Z35.1-
1968 or in Figures 1 to 13 of ANSI Z535.2-2011, incorporated by
reference in Sec. 1926.6.
* * * * *
Signed at Washington, DC, on October 30, 2013.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2013-26338 Filed 11-5-13; 8:45 am]
BILLING CODE 4510-26-P
