Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting, 63161-63162 [2013-24859]

Download as PDF Federal Register / Vol. 78, No. 205 / Wednesday, October 23, 2013 / Notices these petitions are submitted is 11.313, Trade Adjustment Assistance for Firms. Dated: October 17, 2013. Michael DeVillo, Eligibility Examiner. [FR Doc. 2013–24831 Filed 10–22–13; 8:45 am] BILLING CODE 3510–WH–P DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting ‘‘Rescheduled’’ The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on November 12, 2013, 9:30 a.m., in the Herbert C. Hoover Building, Room 3884, 14th Street between Constitution and Pennsylvania Avenues NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration on technical questions that affect the level of export controls applicable to sensors and instrumentation equipment and technology. Agenda emcdonald on DSK67QTVN1PROD with NOTICES Public Session 1. Welcome and Introductions. 2. Remarks from the Bureau of Industry and Security Management. 3. Industry Presentations. 4. New Business. Closed Session 5. Discussion of matters determined to be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). The open session will be accessible via teleconference to 20 participants on a first come, first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@ bis.doc.gov no later than November 5, 2013. A limited number of seats will be available during the public session of the meeting. Reservations are not accepted. To the extent that time permits, members of the public may present oral statements to the Committee. The public may submit written statements at any time before or after the meeting. However, to facilitate distribution of public presentation materials to the Committee members, the Committee suggests that the materials be forwarded before the meeting to Ms. Springer. The Assistant Secretary for Administration, with the concurrence of the General Counsel, formally VerDate Mar<15>2010 18:13 Oct 22, 2013 Jkt 232001 determined on September 23, 2013 pursuant to Section 10(d) of the Federal Advisory Committee Act, as amended (5 U.S.C. app. 2 § 10(d), that the portion of this meeting dealing with pre-decisional changes to the Commerce Control List and U.S. export control policies shall be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). The remaining portions of the meeting will be open to the public. For more information contact Yvette Springer on (202) 482–2813. Dated: October 18, 2013. Yvette Springer, Committee Liaison Officer. [FR Doc. 2013–24860 Filed 10–22–13; 8:45 am] BILLING CODE P DEPARTMENT OF COMMERCE Bureau of Industry and Security Transportation and Related Equipment Technical Advisory Committee; Notice of Open Meeting The Transportation and Related Equipment Technical Advisory Committee will meet on November 13, 2013, 9:30 a.m., in the Herbert C. Hoover Building, Room 3884, 14th Street between Constitution & Pennsylvania Avenues NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration with respect to technical questions that affect the level of export controls applicable to transportation and related equipment or technology. Agenda Public Session 1. Welcome and Introductions. 2. Status reports by working group chairs. 3. Public comments and Proposals. The open session will be accessible via teleconference to 20 participants on a first come, first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@ bis.doc.gov no later than November 6, 2013. A limited number of seats will be available during the public session of the meeting. Reservations are not accepted. To the extent time permits, members of the public may present oral statements to the Committee. The public may submit written statements at any time before or after the meeting. However, to facilitate distribution of public presentation materials to Committee members, the Committee suggests that presenters forward the PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 63161 public presentation materials prior to the meeting to Ms. Springer via email. For more information, call Yvette Springer at (202) 482–2813. Dated: October 18, 2013. Yvette Springer, Committee Liaison Officer. [FR Doc. 2013–24862 Filed 10–22–13; 8:45 am] BILLING CODE P DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical Advisory Committee (MPETAC) will meet on November 5, 2013, 9:00 a.m., Room 3884, in the Herbert C. Hoover Building, 14th Street between Pennsylvania and Constitution Avenues, NW., Washington, DC The Committee advises the Office of the Assistant Secretary for Export Administration with respect to technical questions that affect the level of export controls applicable to materials processing equipment and related technology. Agenda Open Session 1. Opening remarks and introductions. 2. Presentation of papers and comments by the Public. 3. Discussions on results from last, and proposals for next Wassenaar meeting. 4. Report on proposed and recently issued changes to the Export Administration Regulations. 5. Other business. Closed Session 6. Discussion of matters determined to be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). The open session will be accessible via teleconference to 20 participants on a first come, first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@ bis.doc.gov, no later than October 29, 2013. A limited number of seats will be available for the public session. Reservations are not accepted. To the extent that time permits, members of the public may present oral statements to the Committee. The public may submit written statements at any time before or after the meeting. However, to facilitate the distribution of public presentation E:\FR\FM\23OCN1.SGM 23OCN1 63162 Federal Register / Vol. 78, No. 205 / Wednesday, October 23, 2013 / Notices materials to the Committee members, the Committee suggests that presenters forward the public presentation materials prior to the meeting to Ms. Springer via email. The Assistant Secretary for Administration, with the concurrence of the delegate of the General Counsel, formally determined on February 20, 2013, pursuant to Section 10(d) of the Federal Advisory Committee Act, as amended (5 U.S.C. app. 2 § 10(d)), that the portion of the meeting dealing with matters the premature disclosure of which would be likely to frustrate significantly implementation of a proposed agency action as described in 5 U.S.C. 552b(c)(9)(B) shall be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a) (1) and 10(a) (3). The remaining portions of the meeting will be open to the public. For more information, call Yvette Springer at (202) 482–2813. Dated: October 18, 2013. Yvette Springer, Committee Liaison Officer. [FR Doc. 2013–24859 Filed 10–22–13; 8:45 am] BILLING CODE 3510–JT–P DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC) will meet on November 6 and 7, 2013, 9:00 a.m., in the Herbert C. Hoover Building, Room 3884, 14th Street between Constitution and Pennsylvania Avenues NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration on technical questions that affect the level of export controls applicable to information systems equipment and technology. Wednesday, November 6 Dated: October 18, 2013. Yvette Springer, Committee Liaison Officer. [FR Doc. 2013–24857 Filed 10–22–13; 8:45 am] BILLING CODE 3510–JT–P DEPARTMENT OF COMMERCE Open Session emcdonald on DSK67QTVN1PROD with NOTICES to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). The open session will be accessible via teleconference to 20 participants on a first come, first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@ bis.doc.gov, no later than October 30, 2013. A limited number of seats will be available for the public session. Reservations are not accepted. To the extent time permits, members of the public may present oral statements to the Committee. The public may submit written statements at any time before or after the meeting. However, to facilitate distribution of public presentation materials to Committee members, the Committee suggests that public presentation materials or comments be forwarded before the meeting to Ms. Springer. The Assistant Secretary for Administration, with the concurrence of the delegate of the General Counsel, formally determined on April 4, 2013, pursuant to Section 10(d) of the Federal Advisory Committee Act, as amended (5 U.S.C. app. 2 § (10)(d)), that the portion of the meeting concerning trade secrets and commercial or financial information deemed privileged or confidential as described in 5 U.S.C. 552b(c)(4) and the portion of the meeting concerning matters the disclosure of which would be likely to frustrate significantly implementation of an agency action as described in 5 U.S.C. 552b(c)(9)(B) shall be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and l0(a)(3). The remaining portions of the meeting will be open to the public. For more information, call Yvette Springer at (202)482–2813. International Trade Administration 1. Welcome and Introductions. 2. Working Group Reports. 3. Industry presentation: Modular Instruments. 4. Industry presentation: Electronic Design Roadmap. 5. New business. [A–533–843] Thursday, November 7 Certain Lined Paper Products From India: Notice of Partial Rescission and Preliminary Results of Antidumping Duty Administrative Review; 2011– 2012 Closed Session AGENCY: 6. Discussion of matters determined to be exempt from the provisions relating VerDate Mar<15>2010 18:13 Oct 22, 2013 Jkt 232001 Import Administration, International Trade Administration, U.S. Department of Commerce. PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 In response to requests from Petitioners 1 and two Indian companies, Navneet Publications (India) Ltd. (Navneet) and AR Printing & Packaging (India) Pvt. Ltd. (AR Printing), the Department of Commerce (the Department) is conducting an administrative review of the antidumping duty order on certain lined paper products (CLPP) from India.2 The period of review (POR) is September 1, 2011, through August 31, 2012. The Department initiated a review of 82 Indian producers/exporters of subject merchandise,3 but Petitioners timely withdrew their review request in its entirety.4 We are rescinding this review in its entirety with the exception of the two self-requesting companies, Navneet and AR Printing. We preliminarily find that Navneet (the sole mandatory respondent) sold subject merchandise at less than normal value during the POR. We have preliminarily assigned AR Printing (the sole non-selected company) the non-selected rate based on the margin calculated for Navneet in this review. DATES: Effective October 23, 2013. FOR FURTHER INFORMATION CONTACT: Cindy Robinson or George McMahon, AD/CVD Operations, Office 8, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington DC 20230; telephone (202) 482–3797 or (202) 482– 1167, respectively. SUMMARY: Scope of the Order The merchandise covered by the CLPP Order is certain lined paper products. The merchandise subject to this order is currently classified under the following Harmonized Tariff Schedule of the United States (HTSUS) subheadings: 4811.90.9035, 4811.90.9080, 4820.30.0040, 4810.22.5044, 4811.90.9050, 4811.90.9090, 4820.10.2010, 4820.10.2020, 1 The Petitioners are the Association of American School Paper Suppliers (AASPS) and its individual members. 2 See Notice of Amended Final Determination of Sales at Less Than Fair Value: Certain Lined Paper Products from the People’s Republic of China; Notice of Antidumping Duty Orders: Certain Lined Paper Products from India, Indonesia and the People’s Republic of China; and Notice of Countervailing Duty Orders: Certain Lined Paper Products from India and Indonesia, 71 FR 56949 (September 28, 2006) (CLPP Order). 3 See Initiation of Antidumping and Countervailing Duty Administrative Reviews and Request for Revocation in Part, 77 FR 65858 (October 31, 2012) (Initiation Notice). 4 See Petitioners’ withdrawal letter dated January 28, 2013. Petitioners’ request for review covered 82 Indian producers/exporters of subject merchandise, including Navneet and AR Printing. See Petitioners’ review request letter dated September 28, 2012. E:\FR\FM\23OCN1.SGM 23OCN1

Agencies

[Federal Register Volume 78, Number 205 (Wednesday, October 23, 2013)]
[Notices]
[Pages 63161-63162]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-24859]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Bureau of Industry and Security


Materials Processing Equipment Technical Advisory Committee; 
Notice of Partially Closed Meeting

    The Materials Processing Equipment Technical Advisory Committee 
(MPETAC) will meet on November 5, 2013, 9:00 a.m., Room 3884, in the 
Herbert C. Hoover Building, 14th Street between Pennsylvania and 
Constitution Avenues, NW., Washington, DC The Committee advises the 
Office of the Assistant Secretary for Export Administration with 
respect to technical questions that affect the level of export controls 
applicable to materials processing equipment and related technology.

Agenda

Open Session

    1. Opening remarks and introductions.
    2. Presentation of papers and comments by the Public.
    3. Discussions on results from last, and proposals for next 
Wassenaar meeting.
    4. Report on proposed and recently issued changes to the Export 
Administration Regulations.
    5. Other business.

Closed Session

    6. Discussion of matters determined to be exempt from the 
provisions relating to public meetings found in 5 U.S.C. app. 2 
Sec. Sec.  10(a)(1) and 10(a)(3).
    The open session will be accessible via teleconference to 20 
participants on a first come, first serve basis. To join the 
conference, submit inquiries to Ms. Yvette Springer at 
Yvette.Springer@bis.doc.gov, no later than October 29, 2013.
    A limited number of seats will be available for the public session. 
Reservations are not accepted. To the extent that time permits, members 
of the public may present oral statements to the Committee. The public 
may submit written statements at any time before or after the meeting. 
However, to facilitate the distribution of public presentation

[[Page 63162]]

materials to the Committee members, the Committee suggests that 
presenters forward the public presentation materials prior to the 
meeting to Ms. Springer via email.
    The Assistant Secretary for Administration, with the concurrence of 
the delegate of the General Counsel, formally determined on February 
20, 2013, pursuant to Section 10(d) of the Federal Advisory Committee 
Act, as amended (5 U.S.C. app. 2 Sec.  10(d)), that the portion of the 
meeting dealing with matters the premature disclosure of which would be 
likely to frustrate significantly implementation of a proposed agency 
action as described in 5 U.S.C. 552b(c)(9)(B) shall be exempt from the 
provisions relating to public meetings found in 5 U.S.C. app. 2 
Sec. Sec.  10(a) (1) and 10(a) (3). The remaining portions of the 
meeting will be open to the public.
    For more information, call Yvette Springer at (202) 482-2813.

    Dated: October 18, 2013.
Yvette Springer,
Committee Liaison Officer.
[FR Doc. 2013-24859 Filed 10-22-13; 8:45 am]
BILLING CODE 3510-JT-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.