Information Collection Request Submitted to OMB for Review and Approval; Comment Request; NESHAP for Boat Manufacturing (Renewal), 59671 [2013-23559]

Download as PDF Federal Register / Vol. 78, No. 188 / Friday, September 27, 2013 / Notices estimated respondent burden compared with the ICR currently approved by OMB. This decrease represents changes in the number of estimated submissions based on EPA’s recent experience with TSCA section 8(e) notices plus the effects of optional electronic reporting. This change involves both a program change (electronic reporting) and an adjustment. The Supporting Statement provides additional detail concerning the change in burden estimate. Dated: September 19, 2013. Richard T. Westlund, Acting Director, Collection Strategies Division. FOR FURTHER INFORMATION CONTACT: [FR Doc. 2013–23676 Filed 9–26–13; 8:45 am] BILLING CODE 6560–50–P ENVIRONMENTAL PROTECTION AGENCY [EPA–HQ–OECA–2013–0339; FRL—9536–6] Information Collection Request Submitted to OMB for Review and Approval; Comment Request; NESHAP for Boat Manufacturing (Renewal) Environmental Protection Agency (EPA). ACTION: Notice. AGENCY: The Environmental Protection Agency has submitted an information collection request (ICR), ‘‘NESHAP for Boat Manufacturing (40 CFR Part 63, Subpart VVVV) (Renewal)’’ (EPA ICR No. 1966.05, OMB Control No. 2060– 0546), to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq). This is a proposed extension of the ICR, which is currently approved through October 31, 2013. Public comments were previously requested via the Federal Register (78 FR 33409) on June 4, 2013, during a 60-day comment period. This notice allows for an additional 30 days for public comments. A fuller description of the ICR is given below, including its estimated burden and cost to the public. An Agency may not conduct or sponsor and a person is not required to respond to a collection of information unless it displays a currently valid OMB control number. DATES: Additional comments may be submitted on or before October 28, 2013. ADDRESSES: Submit your comments, referencing Docket ID Number EPA– HQ–OECA–2013–0339, to: (1) EPA online, using www.regulations.gov (our preferred method), by email to: docket.oeca@epa.gov, or by mail to: EPA Docket Center, Environmental pmangrum on DSK3VPTVN1PROD with NOTICES SUMMARY: VerDate Mar<15>2010 14:21 Sep 26, 2013 Jkt 229001 Protection Agency, Mail Code 28221T, 1200 Pennsylvania Ave. NW., Washington, DC 20460; and (2) OMB via email to oira_submission@omb.eop.gov. Address comments to OMB Desk Officer for EPA. EPA’s policy is that all comments received will be included in the public docket without change including any personal information provided, unless the comment includes profanity, threats, information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Learia Williams, Monitoring, Assistance, and Media Programs Division, Office of Compliance, Mail Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460; telephone number: (202) 564–4113; fax number: (202) 564–0050; email address: williams.learia@epa.gov. SUPPLEMENTARY INFORMATION: Supporting documents which explain in detail the information that the EPA will be collecting are available in the public docket for this ICR. The docket can be viewed online at www.regulations.gov or in person at the EPA Docket Center, WJC West, Room 3334, 1301 Constitution Ave. NW., Washington, DC. The telephone number for the Docket Center is 202–566–1744. For additional information about EPA’s public docket, visit: https:// www.epa.gov/dockets. Abstract: The NESHAP for Boat Manufacturing (40 CFR Part 63, Subpart VVVV) covers resin and gel coat operations at fiberglass boat manufacturers, paint and coating operations at aluminum boat manufacturers, and carpet and fabric adhesive operations at all boat manufacturers. Owners or operators of boat manufacturing facilities are required to submit initial notification, performance tests, and periodic reports. Respondents are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. Semiannual reports are also required. These notifications, reports, and records are essential in determining compliance; and are required, in general, of all sources subject to NESHAP. Form Numbers: None. Respondents/affected entities: Boat manufacturing. PO 00000 Frm 00025 Fmt 4703 Sfmt 4703 59671 Respondent’s obligation to respond: Mandatory (40 CFR part 63, subpart VVVV). Estimated number of respondents: 144 (total). Frequency of response: Initially, quarterly, and semiannually. Total estimated burden: 23,543 hours (per year). ‘‘Burden’’ is defined at 5 CFR 1320.3(b). Total estimated cost: $2,303,583 (per year), includes $800 annualized capital or operation & maintenance costs. Changes in the Estimates: There is no change in labor hours in this ICR compared to the previous ICR. This is due to two considerations: (1) The regulations have not changed over the past three years and are not anticipated to change over the next three years; and (2) the growth rate for the industry is very low, negative or non-existent, so there is no significant change in the overall burden. However, there is an adjustment increase in the respondent burden costs due to an increase in labor rate. This ICR uses updated labor rates from the Bureau of Labor Statistics to calculate burden costs. Richard T. Westlund, Acting Director, Collection Strategies Division. [FR Doc. 2013–23559 Filed 9–26–13; 8:45 am] BILLING CODE 6560–50–P ENVIRONMENTAL PROTECTION AGENCY [EPA–HQ–OECA–2013–0345; FRL–9536–7] Information Collection Request Submitted to OMB for Review and Approval; Comment Request; NESHAP for Metal Can Manufacturing Surface Coating (Renewal) Environmental Protection Agency (EPA). ACTION: Notice. AGENCY: The Environmental Protection Agency has submitted an information collection request (ICR), ‘‘NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK) (Renewal)’’ (EPA ICR No. 2079.05, OMB Control No. 2060–0541), to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq). This is a proposed extension of the ICR, which is currently approved through October 31, 2013. Public comments were previously requested via the Federal Register (78 FR 33409) on June 4, 2013 during a 60day comment period. This notice allows for an additional 30 days for public SUMMARY: E:\FR\FM\27SEN1.SGM 27SEN1

Agencies

[Federal Register Volume 78, Number 188 (Friday, September 27, 2013)]
[Notices]
[Page 59671]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-23559]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OECA-2013-0339; FRL--9536-6]


Information Collection Request Submitted to OMB for Review and 
Approval; Comment Request; NESHAP for Boat Manufacturing (Renewal)

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency has submitted an 
information collection request (ICR), ``NESHAP for Boat Manufacturing 
(40 CFR Part 63, Subpart VVVV) (Renewal)'' (EPA ICR No. 1966.05, OMB 
Control No. 2060-0546), to the Office of Management and Budget (OMB) 
for review and approval in accordance with the Paperwork Reduction Act 
(44 U.S.C. 3501 et seq). This is a proposed extension of the ICR, which 
is currently approved through October 31, 2013. Public comments were 
previously requested via the Federal Register (78 FR 33409) on June 4, 
2013, during a 60-day comment period. This notice allows for an 
additional 30 days for public comments. A fuller description of the ICR 
is given below, including its estimated burden and cost to the public. 
An Agency may not conduct or sponsor and a person is not required to 
respond to a collection of information unless it displays a currently 
valid OMB control number.

DATES: Additional comments may be submitted on or before October 28, 
2013.

ADDRESSES: Submit your comments, referencing Docket ID Number EPA-HQ-
OECA-2013-0339, to: (1) EPA online, using www.regulations.gov (our 
preferred method), by email to: docket.oeca@epa.gov, or by mail to: EPA 
Docket Center, Environmental Protection Agency, Mail Code 28221T, 1200 
Pennsylvania Ave. NW., Washington, DC 20460; and (2) OMB via email to 
oira_submission@omb.eop.gov. Address comments to OMB Desk Officer for 
EPA.
    EPA's policy is that all comments received will be included in the 
public docket without change including any personal information 
provided, unless the comment includes profanity, threats, information 
claimed to be Confidential Business Information (CBI) or other 
information whose disclosure is restricted by statute.

FOR FURTHER INFORMATION CONTACT: Learia Williams, Monitoring, 
Assistance, and Media Programs Division, Office of Compliance, Mail 
Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. 
NW., Washington, DC 20460; telephone number: (202) 564-4113; fax 
number: (202) 564-0050; email address: williams.learia@epa.gov.

SUPPLEMENTARY INFORMATION: Supporting documents which explain in detail 
the information that the EPA will be collecting are available in the 
public docket for this ICR. The docket can be viewed online at 
www.regulations.gov or in person at the EPA Docket Center, WJC West, 
Room 3334, 1301 Constitution Ave. NW., Washington, DC. The telephone 
number for the Docket Center is 202-566-1744. For additional 
information about EPA's public docket, visit: https://www.epa.gov/dockets.
    Abstract: The NESHAP for Boat Manufacturing (40 CFR Part 63, 
Subpart VVVV) covers resin and gel coat operations at fiberglass boat 
manufacturers, paint and coating operations at aluminum boat 
manufacturers, and carpet and fabric adhesive operations at all boat 
manufacturers. Owners or operators of boat manufacturing facilities are 
required to submit initial notification, performance tests, and 
periodic reports. Respondents are also required to maintain records of 
the occurrence and duration of any startup, shutdown, or malfunction in 
the operation of an affected facility, or any period during which the 
monitoring system is inoperative. Semiannual reports are also required. 
These notifications, reports, and records are essential in determining 
compliance; and are required, in general, of all sources subject to 
NESHAP.
    Form Numbers: None.
    Respondents/affected entities: Boat manufacturing.
    Respondent's obligation to respond: Mandatory (40 CFR part 63, 
subpart VVVV).
    Estimated number of respondents: 144 (total).
    Frequency of response: Initially, quarterly, and semiannually.
    Total estimated burden: 23,543 hours (per year). ``Burden'' is 
defined at 5 CFR 1320.3(b).
    Total estimated cost: $2,303,583 (per year), includes $800 
annualized capital or operation & maintenance costs.
    Changes in the Estimates: There is no change in labor hours in this 
ICR compared to the previous ICR. This is due to two considerations: 
(1) The regulations have not changed over the past three years and are 
not anticipated to change over the next three years; and (2) the growth 
rate for the industry is very low, negative or non-existent, so there 
is no significant change in the overall burden. However, there is an 
adjustment increase in the respondent burden costs due to an increase 
in labor rate. This ICR uses updated labor rates from the Bureau of 
Labor Statistics to calculate burden costs.

Richard T. Westlund,
Acting Director, Collection Strategies Division.
[FR Doc. 2013-23559 Filed 9-26-13; 8:45 am]
BILLING CODE 6560-50-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.