Airworthiness Directives; Airbus Airplanes, 57784-57786 [2013-22542]
Download as PDF
57784
Federal Register / Vol. 78, No. 183 / Friday, September 20, 2013 / Rules and Regulations
regulation on state, local, and tribal
governments and the private sector have
been assessed. This regulation will not
compel the expenditure in any one year
of $100 million or more by state, local,
and tribal governments, in the aggregate,
or by the private sector. Therefore, a
statement under § 1532 is not required.
PART 1690—THRIFT SAVINGS PLAN
4. The authority citation for part 1690
continues to read as follows:
■
Authority: 5 U.S.C. 8474.
5. Revise the definition of ‘‘spouse’’ in
§ 1690.1 to read as follows:
■
§ 1690.1
Submission to Congress and the
General Accounting Office
Definitions.
*
Pursuant to 5 U.S.C. 810(a)(1)(A), the
FRTIB submitted a report containing
this rule and other required information
to the U.S. Senate, the U.S. House of
Representatives, and the Comptroller
General of the United States before
publication of this rule in the Federal
Register. This rule is not a major rule as
defined at 5 U.S.C. 804(2).
List of Subjects
5 CFR Part 1651
Claims, Government employees,
Pensions, Retirement.
5 CFR Part 1690
Government employees, Pensions,
Retirement.
Gregory T. Long,
Executive Director, Federal Retirement Thrift
Investment Board.
*
*
*
*
Spouse means the person to whom a
TSP participant is married on the date
he or she signs a form on which the TSP
requests spousal information. Where a
participant is seeking to reclaim an
account that has been forfeited pursuant
to 5 CFR 1650.16, spouse means the
person to whom the participant was
married on the withdrawal deadline.
For purposes of 5 CFR 1651.5 and 5 CFR
1651.19, spouse means the person to
whom the participant was married on
the date of the participant’s death. A
TSP participant is considered to be
married even if the parties are
separated, unless a court decree of
divorce or annulment has been entered.
The laws of the jurisdiction in which
the marriage was initially established
will be used to determine whether a
TSP participant is married.
*
*
*
*
*
[FR Doc. 2013–22898 Filed 9–19–13; 8:45 am]
BILLING CODE 6760–01–P
For the reasons stated in the
preamble, the FRTIB amends 5 CFR
chapter VI as follows:
DEPARTMENT OF TRANSPORTATION
PART 1651—DEATH BENEFITS
resulting in an uncontrolled fire and
subsequent loss of the airplane.
DATES: This AD becomes effective
October 25, 2013.
The Director of the Federal Register
approved the incorporation by reference
of a certain publication listed in this AD
as of October 25, 2013.
ADDRESSES: You may examine the AD
docket on the Internet at https://
www.regulations.gov or in person at the
U.S. Department of Transportation,
Docket Operations, M–30, West
Building Ground Floor, Room W12–140,
1200 New Jersey Avenue SE.,
Washington, DC.
For service information identified in
this AD, contact Airbus SAS—
Airworthiness Office—EAL, 1 Rond
Point Maurice Bellonte, 31707 Blagnac
Cedex, France; telephone +33 5 61 93 36
96; fax +33 5 61 93 45 80; email
airworthiness.A330–A340@airbus.com;
Internet https://www.airbus.com. You
may review copies of the referenced
service information at the FAA,
Transport Airplane Directorate, 1601
Lind Avenue SW., Renton, WA. For
information on the availability of this
material at the FAA, call 425–227–1221.
FOR FURTHER INFORMATION CONTACT:
Vladimir Ulyanov, Aerospace Engineer,
International Branch, ANM–116,
Transport Airplane Directorate, FAA,
1601 Lind Avenue SW., Renton, WA
98057–3356; phone: (425) 227–1138;
fax: (425) 227–1149.
SUPPLEMENTARY INFORMATION:
Federal Aviation Administration
1. The authority citation for part 1651
continues to read as follows:
Discussion
14 CFR Part 39
Authority: 5 U.S.C. 8424(d), 8432d, 8432(j),
8433(e), 8435(c)(2), 8474(b)(5) and 8474(c)(1).
[Docket No. FAA–2013–0463; Directorate
Identifier 2012–NM–165–AD; Amendment
39–17584; AD 2013–19–02]
We issued a notice of proposed
rulemaking (NPRM) to amend 14 CFR
part 39 to include an AD that would
apply to the specified products. The
NPRM published in the Federal
Register on June 21, 2013 (78 FR 37498).
The NPRM proposed to correct an
unsafe condition for the specified
products.
The European Aviation Safety Agency
(EASA), which is the Technical Agent
for the Member States of the European
Community, has issued EASA
Airworthiness Directive 2012–0182,
dated September 11, 2012 (referred to
after this as the Mandatory Continuing
Airworthiness Information, or ‘‘the
MCAI’’), to correct an unsafe condition
for the specified products. The MCAI
states:
■
§ 1651.1
[Amended]
RIN 2120–AA64
2. Amend paragraph (b) § 1651.1 to
remove the definition of ‘‘domicile.’’
■ 3. Revise paragraph (a) of § 1651.5 to
read as follows:
■
tkelley on DSK3SPTVN1PROD with RULES
§ 1651.5
Airworthiness Directives; Airbus
Airplanes
(a) For purposes of payment under
§ 1651.2(a)(2) and establishment of
beneficiary participant accounts under
§ 1651.19, the spouse of the participant
is the person to whom the participant
was married on the date of death. A
person is considered to be married even
if the parties are separated, unless a
court decree of divorce or annulment
has been entered. The laws of the
jurisdiction in which the marriage was
initially established will be used to
determine whether the participant was
married on the date of death.
*
*
*
*
*
VerDate Mar<15>2010
17:06 Sep 19, 2013
Jkt 229001
Federal Aviation
Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule.
AGENCY:
Spouse of participant.
We are adopting a new
airworthiness directive (AD) for certain
Airbus Model A330–200, –200
Freighter, and –300 series airplanes.
This AD was prompted by a report that
a certain wire harness located in the tail
cone has wiring of a narrower gauge
than design requires. This AD requires
replacing the affected wire harness. We
are issuing this AD to prevent damage
to the affected wiring, which could
create an ignition source in an area that
might contain fuel vapors, possibly
SUMMARY:
PO 00000
Frm 00002
Fmt 4700
Sfmt 4700
On a production aeroplane, it has been
discovered that wires in harness 5877VB,
installed in the Tail Cone (Section 19.1) and
connected to the Auxiliary Power Unit
starter, have a section smaller [narrower]
than required by design. Section 19 is a
flammable fluid leakage zone, adjacent to a
fuel tank (trim tank) and is open with Section
E:\FR\FM\20SER1.SGM
20SER1
Federal Register / Vol. 78, No. 183 / Friday, September 20, 2013 / Rules and Regulations
19.1. The results of the investigation show
that this issue is a manufacturing quality
issue. Airbus identified a list of other
aeroplanes that are affected.
This condition, if not corrected, could
damage the wiring which may create an
ignition source in an area that may contain
fuel vapours, possibly resulting in an
uncontrolled fire and subsequent loss of the
aeroplane.
*
*
*
*
*
For the reasons described above, this
[EASA] AD requires the replacement of the
affected wiring harness.
You may obtain further information
by examining the MCAI in the AD
docket.
Comments
We gave the public the opportunity to
participate in developing this AD. We
received no comments on the NPRM (78
FR 37498, June 21, 2013) or on the
determination of the cost to the public.
Conclusion
We reviewed the available data and
determined that air safety and the
public interest require adopting this AD
as proposed except for minor editorial
changes. We have determined that these
minor changes:
• Are consistent with the intent that
was proposed in the NPRM (78 FR
37498, June 21, 2013) for correcting the
unsafe condition; and
• Do not add any additional burden
upon the public than was already
proposed in the NPRM (78 FR 37498,
June 21, 2013).
Costs of Compliance
tkelley on DSK3SPTVN1PROD with RULES
Based on the service information, we
estimate that this AD affects about 1
product of U.S. registry. We also
estimate that it will take about 4 workhours per product to comply with the
basic requirements of this AD. The
average labor rate is $85 per work-hour.
Required parts will cost about $2,920
per product. Where the service
information lists required parts costs
that are covered under warranty, we
have assumed that there will be no
charge for these parts. As we do not
control warranty coverage for affected
parties, some parties may incur costs
higher than estimated here. Based on
these figures, we estimate the cost of
this AD on U.S. operators to be $3,260,
or $3,260 per product.
Authority for This Rulemaking
Title 49 of the United States Code
specifies the FAA’s authority to issue
rules on aviation safety. Subtitle I,
section 106, describes the authority of
the FAA Administrator. ‘‘Subtitle VII:
Aviation Programs,’’ describes in more
VerDate Mar<15>2010
17:06 Sep 19, 2013
Jkt 229001
detail the scope of the Agency’s
authority.
We are issuing this rulemaking under
the authority described in ‘‘Subtitle VII,
Part A, Subpart III, Section 44701:
General requirements.’’ Under that
section, Congress charges the FAA with
promoting safe flight of civil aircraft in
air commerce by prescribing regulations
for practices, methods, and procedures
the Administrator finds necessary for
safety in air commerce. This regulation
is within the scope of that authority
because it addresses an unsafe condition
that is likely to exist or develop on
products identified in this rulemaking
action.
57785
PART 39—AIRWORTHINESS
DIRECTIVES
1. The authority citation for part 39
continues to read as follows:
■
Authority: 49 U.S.C. 106(g), 40113, 44701.
§ 39.13
[Amended]
2. The FAA amends § 39.13 by adding
the following new AD:
■
2013–19–02 Airbus: Amendment 39–17584.
Docket No. FAA–2013–0463; Directorate
Identifier 2012–NM–165–AD.
(a) Effective Date
This airworthiness directive (AD) becomes
effective October 25, 2013.
Regulatory Findings
We determined that this AD will not
have federalism implications under
Executive Order 13132. This AD will
not have a substantial direct effect on
the States, on the relationship between
the national government and the States,
or on the distribution of power and
responsibilities among the various
levels of government.
For the reasons discussed above, I
certify that this AD:
1. Is not a ‘‘significant regulatory
action’’ under Executive Order 12866;
2. Is not a ‘‘significant rule’’ under the
DOT Regulatory Policies and Procedures
(44 FR 11034, February 26, 1979);
3. Will not affect intrastate aviation in
Alaska; and
4. Will not have a significant
economic impact, positive or negative,
on a substantial number of small entities
under the criteria of the Regulatory
Flexibility Act.
We prepared a regulatory evaluation
of the estimated costs to comply with
this AD and placed it in the AD docket.
(b) Affected ADs
None.
Examining the AD Docket
You may examine the AD docket on
the Internet at https://
www.regulations.gov; or in person at the
Docket Operations office between 9 a.m.
and 5 p.m., Monday through Friday,
except Federal holidays. The AD docket
contains this AD, the MCAI, the
regulatory evaluation, any comments
received, and other information. The
street address for the Docket Operations
office (telephone (800) 647–5527) is in
the ADDRESSES section.
(f) Compliance
You are responsible for having the actions
required by this AD performed within the
compliance times specified, unless the
actions have already been done.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation
safety, Incorporation by reference,
Safety.
(h) Other FAA AD Provisions
The following provisions also apply to this
AD:
(1) Alternative Methods of Compliance
(AMOCs): The Manager, International
Branch, ANM–116, Transport Airplane
Directorate, FAA, has the authority to
approve AMOCs for this AD, if requested
using the procedures found in 14 CFR 39.19.
In accordance with 14 CFR 39.19, send your
request to your principal inspector or local
Adoption of the Amendment
Accordingly, under the authority
delegated to me by the Administrator,
the FAA amends 14 CFR part 39 as
follows:
PO 00000
Frm 00003
Fmt 4700
Sfmt 4700
(c) Applicability
This AD applies to Airbus Model A330–
201, –202, –203, –223, –223F, –243 –243F,
–301, –302, –303, –321, –322, –323, –341,
–342, and –343 airplanes; certificated in any
category; manufacturer serial numbers 1070,
1127, 1133, 1135, 1137, 1138, 1141, 1143,
1145, 1146, 1147, 1149, 1150, 1151, 1153,
1155, 1156, 1157, 1159, 1160, 1161, 1165,
1167, 1168, 1169, 1171, 1172, 1173, 1174,
1177, 1178, 1181, 1183, 1184, 1186, 1187,
1188, 1189, 1191, 1195, 1196, and 1202.
(d) Subject
Air Transport Association (ATA) of
America Code 92.
(e) Reason
This AD was prompted by a report that a
certain wire harness located in the tail cone
has wiring of a narrower gauge than design
requires. We are issuing this AD to prevent
damage to the affected wiring, which could
create an ignition source in an area that
might contain fuel vapors, possibly resulting
in an uncontrolled fire and subsequent loss
of the airplane.
(g) Actions
Within 24 months after the effective date
of this AD: Replace wiring harness 5877VB
located in section 19.1, Frame 91 to Frame
96, in accordance with the Accomplishment
Instructions of Airbus Mandatory Service
Bulletin A330–92–3116, dated April 25,
2012.
E:\FR\FM\20SER1.SGM
20SER1
57786
Federal Register / Vol. 78, No. 183 / Friday, September 20, 2013 / Rules and Regulations
Flight Standards District Office, as
appropriate. If sending information directly
to the International Branch, send it to ATTN:
Vladimir Ulyanov, Aerospace Engineer,
International Branch, ANM–116, Transport
Airplane Directorate, FAA, 1601 Lind
Avenue SW., Renton, WA 98057–3356;
phone: (425) 227–1138; fax: (425) 227–1149.
Information may be emailed to: 9–ANM–116–
AMOC–REQUESTS@faa.gov. Before using
any approved AMOC, notify your appropriate
principal inspector, or lacking a principal
inspector, the manager of the local flight
standards district office/certificate holding
district office. The AMOC approval letter
must specifically reference this AD.
(2) Airworthy Product: For any requirement
in this AD to obtain corrective actions from
a manufacturer or other source, use these
actions if they are FAA-approved. Corrective
actions are considered FAA-approved if they
are approved by the State of Design Authority
(or their delegated agent). You are required
to assure the product is airworthy before it
is returned to service.
(i) Related Information
Refer to Mandatory Continuing
Airworthiness Information European
Aviation Safety Agency Airworthiness
Directive 2012–0182, dated September 11,
2012, for related information, which can be
found in the AD docket on the Internet at
https://www.regulations.gov.
(j) Material Incorporated by Reference
tkelley on DSK3SPTVN1PROD with RULES
(1) The Director of the Federal Register
approved the incorporation by reference
(IBR) of the service information listed in this
paragraph under 5 U.S.C. 552(a) and 1 CFR
part 51.
(2) You must use this service information
as applicable to do the actions required by
this AD, unless this AD specifies otherwise.
(i) Airbus Mandatory Service Bulletin
A330–92–3116, dated April 25, 2012
(ii) Reserved.
(3) For service information identified in
this AD, contact Airbus SAS—Airworthiness
Office—EAL, 1 Rond Point Maurice Bellonte,
31707 Blagnac Cedex, France; telephone +33
5 61 93 36 96; fax +33 5 61 93 45 80; email
airworthiness.A330–A340@airbus.com;
Internet https://www.airbus.com.
(4) You may review copies of the service
information at the FAA, Transport Airplane
Directorate, 1601 Lind Avenue SW., Renton,
WA. For information on the availability of
this material at the FAA, call 425–227–1221.
(5) You may view this service information
that is incorporated by reference at the
National Archives and Records
Administration (NARA). For information on
the availability of this material at NARA, call
202–741–6030, or go to: https://
www.archives.gov/federal-register/cfr/ibrlocations.html.
Issued in Renton, Washington on
September 9, 2013.
Jeffrey E. Duven,
Acting Manager, Transport Airplane
Directorate, Aircraft Certification Service.
[FR Doc. 2013–22542 Filed 9–19–13; 8:45 am]
BILLING CODE 4910–13–P
VerDate Mar<15>2010
17:06 Sep 19, 2013
Jkt 229001
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA–2013–0350; Directorate
Identifier 2012–SW–050–AD; Amendment
39–17583; AD 2013–19–01]
RIN 2120–AA64
Airworthiness Directives;
AgustaWestland S.p.A. Helicopters
Federal Aviation
Administration (FAA), DOT.
ACTION: Final rule.
AGENCY:
We are adopting a new
airworthiness directive (AD) for
AgustaWestland S.p.A.
(AgustaWestland) Model A119 and
AW119 MKII helicopters to require
inspecting the pilot and co-pilot doors
to ensure that the windows are properly
bonded within the doors. If the
windows are not properly bonded, the
AD requires applying bonding to the
windows, the seals, and the window
frames of the pilot and co-pilot doors.
This AD was prompted by the loss of a
pilot-door window during a test flight.
The actions of this AD are intended to
ensure the windows do not detach from
the doors, potentially injuring persons
on the ground and damaging the
helicopter’s tailboom and the tail rotor
blades.
DATES: This AD is effective October 25,
2013.
The Director of the Federal Register
approved the incorporation by reference
of a certain document listed in this AD
as of October 25, 2013.
ADDRESSES: For service information
identified in this AD, contact
AgustaWestland, Customer Support &
Services, Via Per Tornavento 15, 21019
Somma Lombardo (VA) Italy, ATTN:
Giovanni Cecchelli; telephone 39–0331–
711133; fax 39 0331 711180; or at https://
www.agustawestland.com/technicalbullettins. You may review the
referenced service information at the
FAA, Office of the Regional Counsel,
Southwest Region, 2601 Meacham
Blvd., Room 663, Fort Worth, Texas
76137.
SUMMARY:
Examining the AD Docket
You may examine the AD docket on
the Internet at https://
www.regulations.gov or in person at the
Docket Operations Office between 9
a.m. and 5 p.m., Monday through
Friday, except Federal holidays. The AD
docket contains this AD, the foreign
authority’s AD, any incorporated-byreference service information, the
PO 00000
Frm 00004
Fmt 4700
Sfmt 4700
economic evaluation, any comments
received, and other information. The
street address for the Docket Operations
Office (phone: 800–647–5527) is U.S.
Department of Transportation, Docket
Operations Office, M–30, West Building
Ground Floor, Room W12–140, 1200
New Jersey Avenue SE., Washington,
DC 20590.
FOR FURTHER INFORMATION CONTACT:
Sharon Miles, Aviation Safety Engineer,
Regulations and Policy Group,
Rotorcraft Directorate, FAA, 2601
Meacham Blvd., Fort Worth, Texas
76137; telephone (817) 222–5110; email
sharon.y.miles@faa.gov.
SUPPLEMENTARY INFORMATION:
Discussion
On April 25, 2013, at 78 FR 24367, the
Federal Register published our notice of
proposed rulemaking (NPRM), which
proposed to amend 14 CFR part 39 to
include an AD that would apply to
AgustaWestland Model A119 and
AW119 MKII helicopters, serial
numbers up to and including 14781.
The NPRM proposed to require
inspecting the pilot and co-pilot doors
to ensure that the windows are properly
bonded within the doors. If the
windows are not properly bonded, the
NPRM proposed applying bonding to
the windows, the seals, and the window
frames of the pilot and co-pilot doors.
The proposed requirements were
intended to ensure the windows do not
detach from the doors, potentially
injuring persons on the ground and
damaging the helicopter’s tailboom and
the tail rotor blades.
The NPRM was prompted by EASA
AD No. 2012–0058, dated April 3, 2012,
issued by the European Aviation Safety
Agency (EASA), which is the Technical
Agent for the Member States of the
European Union. EASA issued AD No.
2012–0058 to correct an unsafe
condition for AgustaWestland Model
A119 and AW119 MKII helicopters.
EASA advises that the pilot-door
window detached during a test flight of
an AW119 MKII helicopter. The
occupant was not injured, and the
helicopter was not damaged.
According to EASA, an investigation
revealed that a ‘‘lack of the bonding of
the seal both to the window and to the
door structure’’ caused the window’s
detachment. To address this unsafe
condition, AugustaWestland issued
Bollettino Tecnico (BT) 119–47, dated
March 29, 2012, and EASA issued AD
2012–0058 to require an inspection of
the bonding in the pilot and co-pilot
door windows and, if there is no
bonding, applying bonding.
If this condition is not corrected, it
could lead to detachment of the
E:\FR\FM\20SER1.SGM
20SER1
Agencies
[Federal Register Volume 78, Number 183 (Friday, September 20, 2013)]
[Rules and Regulations]
[Pages 57784-57786]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-22542]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2013-0463; Directorate Identifier 2012-NM-165-AD;
Amendment 39-17584; AD 2013-19-02]
RIN 2120-AA64
Airworthiness Directives; Airbus Airplanes
AGENCY: Federal Aviation Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: We are adopting a new airworthiness directive (AD) for certain
Airbus Model A330-200, -200 Freighter, and -300 series airplanes. This
AD was prompted by a report that a certain wire harness located in the
tail cone has wiring of a narrower gauge than design requires. This AD
requires replacing the affected wire harness. We are issuing this AD to
prevent damage to the affected wiring, which could create an ignition
source in an area that might contain fuel vapors, possibly resulting in
an uncontrolled fire and subsequent loss of the airplane.
DATES: This AD becomes effective October 25, 2013.
The Director of the Federal Register approved the incorporation by
reference of a certain publication listed in this AD as of October 25,
2013.
ADDRESSES: You may examine the AD docket on the Internet at https://www.regulations.gov or in person at the U.S. Department of
Transportation, Docket Operations, M-30, West Building Ground Floor,
Room W12-140, 1200 New Jersey Avenue SE., Washington, DC.
For service information identified in this AD, contact Airbus SAS--
Airworthiness Office--EAL, 1 Rond Point Maurice Bellonte, 31707 Blagnac
Cedex, France; telephone +33 5 61 93 36 96; fax +33 5 61 93 45 80;
email airworthiness.A330-A340@airbus.com; Internet https://www.airbus.com. You may review copies of the referenced service
information at the FAA, Transport Airplane Directorate, 1601 Lind
Avenue SW., Renton, WA. For information on the availability of this
material at the FAA, call 425-227-1221.
FOR FURTHER INFORMATION CONTACT: Vladimir Ulyanov, Aerospace Engineer,
International Branch, ANM-116, Transport Airplane Directorate, FAA,
1601 Lind Avenue SW., Renton, WA 98057-3356; phone: (425) 227-1138;
fax: (425) 227-1149.
SUPPLEMENTARY INFORMATION:
Discussion
We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR
part 39 to include an AD that would apply to the specified products.
The NPRM published in the Federal Register on June 21, 2013 (78 FR
37498). The NPRM proposed to correct an unsafe condition for the
specified products.
The European Aviation Safety Agency (EASA), which is the Technical
Agent for the Member States of the European Community, has issued EASA
Airworthiness Directive 2012-0182, dated September 11, 2012 (referred
to after this as the Mandatory Continuing Airworthiness Information, or
``the MCAI''), to correct an unsafe condition for the specified
products. The MCAI states:
On a production aeroplane, it has been discovered that wires in
harness 5877VB, installed in the Tail Cone (Section 19.1) and
connected to the Auxiliary Power Unit starter, have a section
smaller [narrower] than required by design. Section 19 is a
flammable fluid leakage zone, adjacent to a fuel tank (trim tank)
and is open with Section
[[Page 57785]]
19.1. The results of the investigation show that this issue is a
manufacturing quality issue. Airbus identified a list of other
aeroplanes that are affected.
This condition, if not corrected, could damage the wiring which
may create an ignition source in an area that may contain fuel
vapours, possibly resulting in an uncontrolled fire and subsequent
loss of the aeroplane.
* * * * *
For the reasons described above, this [EASA] AD requires the
replacement of the affected wiring harness.
You may obtain further information by examining the MCAI in the AD
docket.
Comments
We gave the public the opportunity to participate in developing
this AD. We received no comments on the NPRM (78 FR 37498, June 21,
2013) or on the determination of the cost to the public.
Conclusion
We reviewed the available data and determined that air safety and
the public interest require adopting this AD as proposed except for
minor editorial changes. We have determined that these minor changes:
Are consistent with the intent that was proposed in the
NPRM (78 FR 37498, June 21, 2013) for correcting the unsafe condition;
and
Do not add any additional burden upon the public than was
already proposed in the NPRM (78 FR 37498, June 21, 2013).
Costs of Compliance
Based on the service information, we estimate that this AD affects
about 1 product of U.S. registry. We also estimate that it will take
about 4 work-hours per product to comply with the basic requirements of
this AD. The average labor rate is $85 per work-hour. Required parts
will cost about $2,920 per product. Where the service information lists
required parts costs that are covered under warranty, we have assumed
that there will be no charge for these parts. As we do not control
warranty coverage for affected parties, some parties may incur costs
higher than estimated here. Based on these figures, we estimate the
cost of this AD on U.S. operators to be $3,260, or $3,260 per product.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. ``Subtitle VII: Aviation
Programs,'' describes in more detail the scope of the Agency's
authority.
We are issuing this rulemaking under the authority described in
``Subtitle VII, Part A, Subpart III, Section 44701: General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
Regulatory Findings
We determined that this AD will not have federalism implications
under Executive Order 13132. This AD will not have a substantial direct
effect on the States, on the relationship between the national
government and the States, or on the distribution of power and
responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
1. Is not a ``significant regulatory action'' under Executive Order
12866;
2. Is not a ``significant rule'' under the DOT Regulatory Policies
and Procedures (44 FR 11034, February 26, 1979);
3. Will not affect intrastate aviation in Alaska; and
4. Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
We prepared a regulatory evaluation of the estimated costs to
comply with this AD and placed it in the AD docket.
Examining the AD Docket
You may examine the AD docket on the Internet at https://www.regulations.gov; or in person at the Docket Operations office
between 9 a.m. and 5 p.m., Monday through Friday, except Federal
holidays. The AD docket contains this AD, the MCAI, the regulatory
evaluation, any comments received, and other information. The street
address for the Docket Operations office (telephone (800) 647-5527) is
in the ADDRESSES section.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new AD:
2013-19-02 Airbus: Amendment 39-17584. Docket No. FAA-2013-0463;
Directorate Identifier 2012-NM-165-AD.
(a) Effective Date
This airworthiness directive (AD) becomes effective October 25,
2013.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Airbus Model A330-201, -202, -203, -223, -
223F, -243 -243F, -301, -302, -303, -321, -322, -323, -341, -342,
and -343 airplanes; certificated in any category; manufacturer
serial numbers 1070, 1127, 1133, 1135, 1137, 1138, 1141, 1143, 1145,
1146, 1147, 1149, 1150, 1151, 1153, 1155, 1156, 1157, 1159, 1160,
1161, 1165, 1167, 1168, 1169, 1171, 1172, 1173, 1174, 1177, 1178,
1181, 1183, 1184, 1186, 1187, 1188, 1189, 1191, 1195, 1196, and
1202.
(d) Subject
Air Transport Association (ATA) of America Code 92.
(e) Reason
This AD was prompted by a report that a certain wire harness
located in the tail cone has wiring of a narrower gauge than design
requires. We are issuing this AD to prevent damage to the affected
wiring, which could create an ignition source in an area that might
contain fuel vapors, possibly resulting in an uncontrolled fire and
subsequent loss of the airplane.
(f) Compliance
You are responsible for having the actions required by this AD
performed within the compliance times specified, unless the actions
have already been done.
(g) Actions
Within 24 months after the effective date of this AD: Replace
wiring harness 5877VB located in section 19.1, Frame 91 to Frame 96,
in accordance with the Accomplishment Instructions of Airbus
Mandatory Service Bulletin A330-92-3116, dated April 25, 2012.
(h) Other FAA AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager,
International Branch, ANM-116, Transport Airplane Directorate, FAA,
has the authority to approve AMOCs for this AD, if requested using
the procedures found in 14 CFR 39.19. In accordance with 14 CFR
39.19, send your request to your principal inspector or local
[[Page 57786]]
Flight Standards District Office, as appropriate. If sending
information directly to the International Branch, send it to ATTN:
Vladimir Ulyanov, Aerospace Engineer, International Branch, ANM-116,
Transport Airplane Directorate, FAA, 1601 Lind Avenue SW., Renton,
WA 98057-3356; phone: (425) 227-1138; fax: (425) 227-1149.
Information may be emailed to: 9-ANM-116-AMOC-REQUESTS@faa.gov.
Before using any approved AMOC, notify your appropriate principal
inspector, or lacking a principal inspector, the manager of the
local flight standards district office/certificate holding district
office. The AMOC approval letter must specifically reference this
AD.
(2) Airworthy Product: For any requirement in this AD to obtain
corrective actions from a manufacturer or other source, use these
actions if they are FAA-approved. Corrective actions are considered
FAA-approved if they are approved by the State of Design Authority
(or their delegated agent). You are required to assure the product
is airworthy before it is returned to service.
(i) Related Information
Refer to Mandatory Continuing Airworthiness Information European
Aviation Safety Agency Airworthiness Directive 2012-0182, dated
September 11, 2012, for related information, which can be found in
the AD docket on the Internet at https://www.regulations.gov.
(j) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the service information listed
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless this AD specifies otherwise.
(i) Airbus Mandatory Service Bulletin A330-92-3116, dated April
25, 2012
(ii) Reserved.
(3) For service information identified in this AD, contact
Airbus SAS--Airworthiness Office--EAL, 1 Rond Point Maurice
Bellonte, 31707 Blagnac Cedex, France; telephone +33 5 61 93 36 96;
fax +33 5 61 93 45 80; email airworthiness.A330-A340@airbus.com;
Internet https://www.airbus.com.
(4) You may review copies of the service information at the FAA,
Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA.
For information on the availability of this material at the FAA,
call 425-227-1221.
(5) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, call 202-741-6030, or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.
Issued in Renton, Washington on September 9, 2013.
Jeffrey E. Duven,
Acting Manager, Transport Airplane Directorate, Aircraft Certification
Service.
[FR Doc. 2013-22542 Filed 9-19-13; 8:45 am]
BILLING CODE 4910-13-P