Approval for Manufacturing (Production) Authority; Foreign-Trade Zone 141; Firth Rixson, Inc. d/b/a Firth Rixson Monroe (Aircraft Turbine Components); Rochester, New York, 55056-55057 [2013-21904]
Download as PDF
<![CDATA[
55056
Federal Register / Vol. 78, No. 174 / Monday, September 9, 2013 / Notices
NRDC, 435 U.S. 519, 553 (1978). Also,
environmental objections that could
have been raised at the draft
environmental impact statement stage
but are not raised until after completion
of the final environmental impact
statement may be waived or dismissed
by the courts. City of Angoon v. Hodel,
803 F.2d 1016, 1022 (9th Circ. 1986) and
Wisconsin Heritages, Inc. v. Harris, 490
F. Supp. 1334, 1338 (E.D. Wis. 1980).
Because of these court rulings, it is very
important that those interested in this
analysis participate by the close of the
90-day comment period so substantive
comments and objections are made
available to the Forest Service at a time
when it can meaningfully consider and
respond to them in the Final SEIS.
Nature of Decision To Be Made
Based on the SEIS, the Forest
Supervisor will determine whether or
not additional management direction
will be incorporated into the
Beaverhead-Deerlodge National Forest
Land and Resource Management Plan.
Notice and opportunity for
public comment.
ACTION:
Pursuant to Section 251 of the
Trade Act 1974, as amended (19 U.S.C.
2341 et seq.), the Economic
Development Administration (EDA) has
received petitions for certification of
eligibility to apply for Trade Adjustment
Assistance from the firms listed below.
Accordingly, EDA has initiated
investigations to determine whether
increased imports into the United States
of articles like or directly competitive
with those produced by each of these
firms contributed importantly to the
total or partial separation of the firm’s
workers, or threat thereof, and to a
decrease in sales or production of each
petitioning firm.
SUMMARY:
Dated: August 29, 2013.
Timothy Garcia,
Acting Forest Supervisor.
[FR Doc. 2013–21806 Filed 9–6–13; 8:45 am]
BILLING CODE 3410–11–P
DEPARTMENT OF COMMERCE
Economic Development Administration
Notice of Petitions by Firms for
Determination of Eligibility To Apply
for Trade Adjustment Assistance
Economic Development
Administration, Department of
Commerce.
AGENCY:
LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT ASSISTANCE
[8/22/2013 through 9/3/2013]
Date accepted for
investigation
Firm name
Firm address
Omaha Printing Company ....................
4700 F St., Omaha, NE 68117 .............
8/22/2013
Military Truck Parts, Inc ........................
37910 HWY. 191, Many, LA 71449 .....
8/30/2013
Nedza International
Greenbriar).
4240 Colham Ferry Road, Watkinsville,
GA 30677.
8/30/2013
Inc.
(dba
The
tkelley on DSK3SPTVN1PROD with NOTICES
Any party having a substantial
interest in these proceedings may
request a public hearing on the matter.
A written request for a hearing must be
submitted to the Trade Adjustment
Assistance for Firms Division, Room
71030, Economic Development
Administration, U.S. Department of
Commerce, Washington, DC 20230, no
later than ten (10) calendar days
following publication of this notice.
Please follow the requirements set
forth in EDA’s regulations at 13 CFR
315.9 for procedures to request a public
hearing. The Catalog of Federal
Domestic Assistance official number
and title for the program under which
these petitions are submitted is 11.313,
Trade Adjustment Assistance for Firms.
Dated: September 3, 2013.
Michael DeVillo,
Eligibility Examiner.
[FR Doc. 2013–21837 Filed 9–6–13; 8:45 am]
BILLING CODE 3510–WH–P
VerDate Mar<15>2010
15:01 Sep 06, 2013
Jkt 229001
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Order No. 1913]
Approval for Manufacturing
(Production) Authority; Foreign-Trade
Zone 141; Firth Rixson, Inc. d/b/a Firth
Rixson Monroe (Aircraft Turbine
Components); Rochester, New York
Pursuant to its authority under the ForeignTrade Zones Act of June 18, 1934, as
amended (19 U.S.C. 81a–81u), the ForeignTrade Zones Board (the Board) adopts the
following Order:
Whereas, Monroe County, New York,
grantee of Foreign-Trade Zone 141, has
requested manufacturing (production)
authority on behalf of Firth Rixson, Inc.
d/b/a Firth Rixson Monroe (Firth
Rixson), within FTZ 141 in Rochester,
New York (FTZ Docket 30–2011, filed
4–29–2011);
Whereas, notice inviting public
comment has been given in the Federal
Register (76 FR 25300–25301, 5–4–
2011; 77 FR 43572–43573, 7–25–2012;
78 FR 2658, 1–14–2013; 78 FR 9033, 2–
7–2013) and the application has been
PO 00000
Frm 00005
Fmt 4703
Sfmt 4703
Product(s)
The firm manufactures commercial
printed products.
The firm is a manufacturer of specialty
vehicles such as military transport
and civilian first responder utility vehicles.
The firm manufactures hi-fire functional
stoneware.
processed pursuant to the FTZ Act and
the Board’s regulations; and,
Whereas, the Board adopts the
findings and recommendations of the
examiner’s report, and finds that the
requirements of the FTZ Act and the
Board’s regulations would be satisfied,
and that the proposal would be in the
public interest if approval were subject
to restriction;
Now, therefore, the Board hereby
orders:
The application for manufacturing
(production) authority under zone
procedures within FTZ 141 on behalf of
Firth Rixson, as described in the
application and Federal Register notice,
is approved, subject to the FTZ Act and
the Board’s regulations, including
Section 400.13, and further subject to a
restriction requiring that Firth Rixson
admit all foreign-status titanium
products to the zone under privileged
foreign status (19 CFR 146.41).
E:\FR\FM\09SEN1.SGM
09SEN1
Federal Register / Vol. 78, No. 174 / Monday, September 9, 2013 / Notices
Signed at Washington, DC, this 29th day of
August 2013.
Paul Piquado,
Assistant Secretary of Commerce for Import
Administration, Alternate Chairman, ForeignTrade Zones Board.
within FTZ 134-Site 14, in Chattanooga,
Tennessee.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400) including
notice in the Federal Register inviting
Attest: lllllllllllllllll public comment (78 FR 28190, 05–14–
2013). The FTZ Board has determined
Andrew McGilvray,
that no further review of the activity is
Executive Secretary.
warranted at this time. The production
[FR Doc. 2013–21904 Filed 9–6–13; 8:45 am]
activity described in the notification is
BILLING CODE 3510–DS–P
authorized, subject to the FTZ Act and
the Board’s regulations, including
Section 400.14.
DEPARTMENT OF COMMERCE
Dated: September 3, 2013.
Andrew McGilvray,
Executive Secretary.
Foreign-Trade Zones Board
[B–47–2013]
[FR Doc. 2013–21899 Filed 9–6–13; 8:45 am]
Authorization of Production Activity,
Foreign-Trade Subzone 123E, Vestas
Nacelles America, Inc., (Wind
Turbines), Brighton, Denver, Pueblo,
and Windsor, Colorado
On May 3, 2013, Vestas Nacelles
America, Inc., operator of Subzone 123E
in Brighton, Denver, Pueblo, and
Windsor, Colorado, submitted a
notification of proposed production
activity to the Foreign-Trade Zones
(FTZ) Board.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400), including
notice in the Federal Register inviting
public comment (78 FR 31517, 5–24–
2013). The FTZ Board has determined
that no further review of the activity is
warranted at this time. The production
activity described in the notification is
authorized, subject to the FTZ Act and
the Board’s regulations, including
Section 400.14.
Dated: September 3, 2013.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2013–21897 Filed 9–6–13; 8:45 am]
BILLING CODE 3510–DS–P
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–45–2013]
Subzone 29J, Authorization of
Production Activity, LLFlex, LLC; (Foil
Backed Paperboard), Louisville,
Kentucky
On May 6, 2013, LLFlex, LLC
submitted a notification of proposed
production activity to the Foreign-Trade
Zones (FTZ) Board for its facility within
Subzone 29J, in Louisville, Kentucky.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400), including
notice in the Federal Register inviting
public comment (78 FR 28577–28578,
5–15–2013). The FTZ Board has
determined that no further review of the
activity is warranted at this time. The
production activity described in the
notification is authorized, subject to the
FTZ Act and the Board’s regulations,
including Section 400.14.
Signed at Washington, DC, this 29th day of
August 2013.
Paul Piquado,
Assistant Secretary of Commerce, Alternate
Chairman, Foreign-Trade Zones Board.
lllllllllllllllll
Attest:
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2013–21900 Filed 9–6–13; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
DEPARTMENT OF COMMERCE
Corrosion-Resistant Carbon Steel Flat
Products from the Republic of Korea:
Preliminary Results of Antidumping
Duty Administrative Review; 2011–
2012
Foreign-Trade Zones Board
AGENCY:
[A–580–816]
BILLING CODE 3510–DS–P
[B–42–2013]
tkelley on DSK3SPTVN1PROD with NOTICES
Whereas, the Industrial Development
Board of Blount County, grantee of
Foreign-Trade Zone 148, has requested
authority on behalf of Toho Tenax
America, Inc. (TTA), to manufacture
carbon fiber under zone procedures for
the U.S. market within Subzone 148C at
the TTA facility in Rockwood,
Tennessee, (FTZ Docket 57–2010, filed
September 29, 2010);
Whereas, notice inviting public
comment has been given in the Federal
Register (75 FR 61696, 10/6/2010; 75 FR
74002, 11/30/2010; 77 FR 73978, 12/12/
2012; and 77 FR 75972, 12/26/2012) and
the application has been processed
pursuant to the FTZ Act and the Board’s
regulations; and,
Whereas, the Board adopts the
findings and recommendations of the
examiner’s report, and finds that the
requirements of the FTZ Act and the
Board’s regulations have not been
satisfied;
Now, therefore, the Board hereby does
not approve the application requesting
authority to manufacture carbon fiber
for the U.S. market under zone
procedures within Subzone 148C at the
TTA facility located in Rockwood,
Tennessee.
[FR Doc. 2013–21898 Filed 9–6–13; 8:45 am]
Foreign-Trade Zones Board
Foreign-Trade Zone 134—
Chattanooga, Tennessee;
Authorization of Production Activity;
Komatsu America Corporation,
(Construction and Forestry
Equipment), Chattanooga, Tennessee
On May 6, 2013, the Chattanooga
Chamber Foundation, grantee of FTZ
134, submitted a notification of
proposed production activity to the
Foreign-Trade Zones (FTZ) Board on
behalf of Komatsu America Corporation,
15:01 Sep 06, 2013
amended (19 U.S.C. 81a–81u), the ForeignTrade Zones Board (the Board) adopts the
following Order:
Dated: September 3, 2013.
Andrew McGilvray,
Executive Secretary.
DEPARTMENT OF COMMERCE
VerDate Mar<15>2010
55057
Jkt 229001
[Order No. 1914]
Authority To Manufacture Carbon Fiber
for the U.S. Market Not Approved;
Foreign-Trade Subzone 148C; Toho
Tenax America, Inc.; Rockwood,
Tennessee
Pursuant to its authority under the ForeignTrade Zones Act of June 18, 1934, as
PO 00000
Frm 00006
Fmt 4703
Sfmt 4703
Import Administration,
International Trade Administration,
Department of Commerce.
SUMMARY: In response to requests from
interested parties, the Department of
Commerce (the Department) is
conducting an administrative review of
the antidumping duty order on
corrosion-resistant carbon steel flat
products (CORE) from the Republic of
Korea (Korea), covering the period
E:\FR\FM\09SEN1.SGM
09SEN1
]]>Agencies
[Federal Register Volume 78, Number 174 (Monday, September 9, 2013)]
[Notices]
[Pages 55056-55057]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-21904]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Order No. 1913]
Approval for Manufacturing (Production) Authority; Foreign-Trade
Zone 141; Firth Rixson, Inc. d/b/a Firth Rixson Monroe (Aircraft
Turbine Components); Rochester, New York
Pursuant to its authority under the Foreign-Trade Zones Act of
June 18, 1934, as amended (19 U.S.C. 81a-81u), the Foreign-Trade
Zones Board (the Board) adopts the following Order:
Whereas, Monroe County, New York, grantee of Foreign-Trade Zone
141, has requested manufacturing (production) authority on behalf of
Firth Rixson, Inc. d/b/a Firth Rixson Monroe (Firth Rixson), within FTZ
141 in Rochester, New York (FTZ Docket 30-2011, filed 4-29-2011);
Whereas, notice inviting public comment has been given in the
Federal Register (76 FR 25300-25301, 5-4-2011; 77 FR 43572-43573, 7-25-
2012; 78 FR 2658, 1-14-2013; 78 FR 9033, 2-7-2013) and the application
has been processed pursuant to the FTZ Act and the Board's regulations;
and,
Whereas, the Board adopts the findings and recommendations of the
examiner's report, and finds that the requirements of the FTZ Act and
the Board's regulations would be satisfied, and that the proposal would
be in the public interest if approval were subject to restriction;
Now, therefore, the Board hereby orders:
The application for manufacturing (production) authority under zone
procedures within FTZ 141 on behalf of Firth Rixson, as described in
the application and Federal Register notice, is approved, subject to
the FTZ Act and the Board's regulations, including Section 400.13, and
further subject to a restriction requiring that Firth Rixson admit all
foreign-status titanium products to the zone under privileged foreign
status (19 CFR 146.41).
[[Page 55057]]
Signed at Washington, DC, this 29th day of August 2013.
Paul Piquado,
Assistant Secretary of Commerce for Import Administration, Alternate
Chairman, Foreign-Trade Zones Board.
Attest:----------------------------------------------------------------
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2013-21904 Filed 9-6-13; 8:45 am]
BILLING CODE 3510-DS-P
