Foreign-Trade Zone 247-Erie, Pennsylvania, Application for Subzone, Hardinger Transfer Co., Erie and Grove City, Pennsylvania, 45911 [2013-18319]

Download as PDF Federal Register / Vol. 78, No. 146 / Tuesday, July 30, 2013 / Notices Dated: July 24, 2013. Gwellnar Banks, Management Analyst, Office of the Chief Information Officer. Board’s Web site, which is accessible via www.trade.gov/ftz. For Further Information Contact: Elizabeth Whiteman at Elizabeth. Whiteman@trade.gov or (202) 482–0473. [FR Doc. 2013–18204 Filed 7–29–13; 8:45 am] Dated: July 24, 2013. Andrew McGilvray, Executive Secretary. BILLING CODE 3510–07–P DEPARTMENT OF COMMERCE [FR Doc. 2013–18319 Filed 7–29–13; 8:45 am] Foreign-Trade Zones Board BILLING CODE 3510–DS–P [S–114–2013] DEPARTMENT OF COMMERCE pmangrum on DSK3VPTVN1PROD with NOTICES Foreign-Trade Zone 247—Erie, Pennsylvania, Application for Subzone, Hardinger Transfer Co., Erie and Grove City, Pennsylvania An application has been submitted to the Foreign-Trade Zones (FTZ) Board by the Erie-Western Pennsylvania Port Authority, grantee of FTZ 247, requesting subzone status for the facilities of Hardinger Transfer Co., dba Team Hardinger Transportation and Warehousing (Team Hardinger), located in Erie and Grove City, Pennsylvania. The application was submitted pursuant to the provisions of the Foreign-Trade Zones Act, as amended (19 U.S.C. 81a– 81u), and the regulations of the FTZ Board (15 CFR part 400). It was formally docketed on July 24, 2013. The proposed subzone would consist of the following sites: Site 1 (36 acres) 3106 McCain Avenue, Erie, Erie County; Site 2 (19 acres) 1314 West 18th Street, Erie, Erie County; and, Site 3 (40 acres) 156 Hardinger Boulevard, Grove City, Venango County. No authorization for production activity has been requested at this time. The proposed subzone would be subject to the existing activation limit of FTZ 247. In accordance with the FTZ Board’s regulations, Elizabeth Whiteman of the FTZ Staff is designated examiner to review the application and make recommendations to the Executive Secretary. Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary at the address below. The closing period for their receipt is September 9, 2013. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to September 23, 2013. A copy of the application will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the FTZ VerDate Mar<15>2010 14:32 Jul 29, 2013 Jkt 229001 Foreign-Trade Zones Board [B–75–2013] Foreign-Trade Zone (FTZ) 38— Spartanburg County, South Carolina, Notification of Proposed Production Activity, Black & Decker (U.S.) Inc., (Power Tools), Fort Mill, South Carolina Black & Decker (U.S.) Inc. (Black & Decker) submitted a notification of proposed production activity to the FTZ Board for its facility in Fort Mill, South Carolina within Subzone 38E. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on July 19, 2013. The Black & Decker facility is located within Subzone 38E. The facility is used for the manufacturing of power tool parts and components, the manufacture and assembly of power tools, the packaging and kitting of power tools and the repair and rework of power tools, parts and accessories. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status materials and components and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Black & Decker from customs duty payments on the foreign status components used in export production. On its domestic sales, Black & Decker would be able to choose the duty rates during customs entry procedures that apply to miter saws, drills (with a self-contained motor), saws (with a self-contained motor), grinders, polishers, sanders, screwdrivers, nut-runners, impact wrenches, impact drivers, routers, planers, grass and weed trimmers/ edgers, electro-pneumatic rotary and percussion hammers, electric scissors, circle cutters, spindles, gears, sleeve bearings, motors (cordless), SA armatures and work lights (duty rate ranges from duty-free to 12.5%) for the PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 45911 foreign status inputs noted below. Customs duties also could possibly be deferred or reduced on foreign status production equipment. The components and materials sourced from abroad include: Resins (colored pigments); paints; inks; grease; adhesives; loctite; polyethylene, polypropylene, polystyrene, ABS, acetyl, epoxy powder, polycarbonate, polyethylene terephthalate, polyester, saturated polyester, glass filled nylon and polyamide resins; nylon tape; plastic hoses; flexible hoses; nameplates; transparent tapes; ID labels; plastic labels; tape; film stretch; plastic cases; poly-bags; battery caps; blister packs; shrink-heat tubing; plastic handles and knobs; O-rings; seals; washers; retaining clips; chuck key holders; cord protectors; nuts; spacers/ fasteners; drive belts; Styrofoam; rubber tubing and hoses; backing pads; caps plugs; polisher pads; tool bags; kit boxes; wood pallets; wood biscuits; corrugated sheets; corrugated cartons; non-corrugated cartons; sleeves; hang tags; labels; fillers; gaskets; paper gaskets; seals; corner posts; instruction/ owner manuals; heat transfer labels; blister cards; advertising flyers; leaflets; bulletins; warranty cards; survey cards; slot liners; mower, sander and planer filter bags; sander pads; felt washers and seals; grinding wheels; sanding discs; iron/metal powder; non-alloyed steel; steel; chains; bolts; screws; hardware bag assemblies; lock nuts; nuts; rivets; cotters; cotter pins; retaining rings; snap rings; blade locks; fastener pins; leaf, helical/coil and other springs; wire forms; flanges; backing flanges; rip fences; clips; brass strips; articles of aluminum die-casting; magnesium ingots; bandsaw, circular saw, jigsaw, cutsaw and other blades; wrenches; chuck keys; socket wrenches; clamps; punch/punch & die; drill bits; dies; die kits; loose keys; solders; solder wire; prepared solder bars; parts of inflator fans; mobile bases; wheels for lawnmowers; drill chucks; circle cutters; clamps for stationary tools; parts of work holders; tables and wings for saws; base/cutting arms; brackets, handles, knobs and parts of stationary tools; guards; parts of tools; parts for pneumatic nailers; actuators; bearing plates; bearing retainers; bearing supports; blade clamps; button switches; clamps; cord retainers; counterweights; cover plates; end caps; handles/switch covers; housings; field cases; lock buttons; parts of power tools; circular saw quadrants; shields; jigsaw shoe/plates; triggers; cord clamps; gear cases; dust shields; thrust bearings; ball bearings; needle roller bearings; E:\FR\FM\30JYN1.SGM 30JYN1

Agencies

[Federal Register Volume 78, Number 146 (Tuesday, July 30, 2013)]
[Notices]
[Page 45911]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-18319]


-----------------------------------------------------------------------

 DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[S-114-2013]


Foreign-Trade Zone 247--Erie, Pennsylvania, Application for 
Subzone, Hardinger Transfer Co., Erie and Grove City, Pennsylvania

    An application has been submitted to the Foreign-Trade Zones (FTZ) 
Board by the Erie-Western Pennsylvania Port Authority, grantee of FTZ 
247, requesting subzone status for the facilities of Hardinger Transfer 
Co., dba Team Hardinger Transportation and Warehousing (Team 
Hardinger), located in Erie and Grove City, Pennsylvania. The 
application was submitted pursuant to the provisions of the Foreign-
Trade Zones Act, as amended (19 U.S.C. 81a-81u), and the regulations of 
the FTZ Board (15 CFR part 400). It was formally docketed on July 24, 
2013.
    The proposed subzone would consist of the following sites: Site 1 
(36 acres) 3106 McCain Avenue, Erie, Erie County; Site 2 (19 acres) 
1314 West 18th Street, Erie, Erie County; and, Site 3 (40 acres) 156 
Hardinger Boulevard, Grove City, Venango County. No authorization for 
production activity has been requested at this time. The proposed 
subzone would be subject to the existing activation limit of FTZ 247.
    In accordance with the FTZ Board's regulations, Elizabeth Whiteman 
of the FTZ Staff is designated examiner to review the application and 
make recommendations to the Executive Secretary.
    Public comment is invited from interested parties. Submissions 
shall be addressed to the FTZ Board's Executive Secretary at the 
address below. The closing period for their receipt is September 9, 
2013. Rebuttal comments in response to material submitted during the 
foregoing period may be submitted during the subsequent 15-day period 
to September 23, 2013.
    A copy of the application will be available for public inspection 
at the Office of the Executive Secretary, Foreign-Trade Zones Board, 
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., 
Washington, DC 20230-0002, and in the ``Reading Room'' section of the 
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.
    For Further Information Contact: Elizabeth Whiteman at 
Elizabeth.Whiteman@trade.gov or (202) 482-0473.

    Dated: July 24, 2013.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2013-18319 Filed 7-29-13; 8:45 am]
BILLING CODE 3510-DS-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.