Delegation of National Emission Standards for Hazardous Air Pollutants for the States of Kentucky and Louisiana, Correcting Amendments, 20246-20252 [2013-07540]
Download as PDF
20246
Federal Register / Vol. 78, No. 65 / Thursday, April 4, 2013 / Rules and Regulations
PART 52—APPROVAL AND
PROMULGATION OF
IMPLEMENTATION PLANS
ENVIRONMENTAL PROTECTION
AGENCY
1. The authority citation for part 52
continues to read as follows:
[EPA–R06–OAR–2006–0851; FRL–9796–8]
40 CFR Part 63
■
Delegation of National Emission
Standards for Hazardous Air Pollutants
for the States of Kentucky and
Louisiana, Correcting Amendments
Authority: 42 U.S.C. 7401 et seq.
Subpart NN—Pennsylvania
2. Section 52.2037 is amended by
adding paragraph (s) to read as follows:
■
§ 52.2037 Control strategy plans for
attainment and rate-of-progress: Ozone.
*
*
*
*
*
(s) Determination of attainment. EPA
has determined, as of April 4, 2013, that
based on 2009 to 2011 ambient air
quality data, the Pittsburgh-Beaver
Valley, PA moderate nonattainment area
has attained the 1997 8-hour ozone
National Ambient Air Quality Standard
(NAAQS). This determination, in
accordance with 40 CFR 51.918,
suspends the requirements for this area
to submit an attainment demonstration,
associated reasonably available control
measures, a reasonable further progress
plan, contingency measures, and other
planning SIPs related to attainment of
the standard for as long as this area
continues to meet the 1997 8-hour
ozone NAAQS.
3. Section 52.2056 is amended by
adding paragraph (i) to read as follows:
■
§ 52.2056
Determinations of attainment.
*
*
*
*
*
(i) Based upon EPA’s review of the air
quality data for the 3-year period 2007
to 2009, the Pittsburgh-Beaver Valley,
PA moderate nonattainment area has
attained the 1997 8-hour ozone NAAQS
by the applicable attainment date of
June 15, 2010. Therefore, EPA has met
the requirement pursuant to CAA
section 181(b)(2)(A) to determine, based
on the area’s air quality as of the
attainment date, whether the area
attained the standard. EPA also
determined that the Pittsburgh-Beaver
Valley, PA moderate nonattainment area
will not be reclassified for failure to
attain by its applicable attainment date
pursuant to section 181(b)(2)(A).
wreier-aviles on DSK5TPTVN1PROD with RULES
[FR Doc. 2013–07768 Filed 4–3–13; 8:45 am]
BILLING CODE 6560–50–P
VerDate Mar<15>2010
14:43 Apr 03, 2013
Jkt 229001
Environmental Protection
Agency (EPA).
ACTION: Final rule; correcting
amendments.
AGENCY:
On April 14, 2010, EPA
published a direct final rule approving
delegations of authority for Louisiana.
There was an error in the amendatory
language which resulted in errors in the
codification of the delegated Federal
authorities for Kentucky and Louisiana.
This action corrects the errors.
DATES: This correction is effective on
April 4, 2013.
FOR FURTHER INFORMATION CONTACT: Bill
Deese, Air Planning Section, (6PD–L),
Environmental Protection Agency,
Region 6, 1445 Ross Avenue, Suite 700,
Dallas, Texas 75202–2733, telephone
(214) 665–7253; fax number 214–665–
7263; email address
deese.william@epa.gov.
SUMMARY:
This
action corrects errors in 40 CFR part 63
that resulted from an error in the
amendatory language in a 40 CFR parts
60, 61, and 63 Federal Register direct
final rule, delegation of authority,
entitled ‘‘Delegation of New Source
Performance Standards and National
Emission Standards for Hazardous Air
Pollutants for the State of Louisiana,’’
published April 14, 2010 (75 FR 19252).
The error resulted in the revised
Louisiana 40 CFR part 63 delegation of
authority being codified in 40 CFR
63.99(a)(18) for Kentucky rather than in
40 CFR 63.99(a)(19) for Louisiana.
Paragraph 63.99(a)(19) for Louisiana
remained as previously approved by
EPA for Louisiana on April 17, 2006 (71
FR 19652). In this action, EPA is
correcting the errors in 40 CFR part 63
by replacing paragraph 63.99(a)(18) with
the language approved for Kentucky in
a May 13, 2009 (74 FR 22437), direct
final rule, and replacing paragraph
63.99(a)(19) with the language approved
for Louisiana in the April 14, 2010
Federal Register direct final rule.
EPA has determined that today’s
action falls under the ‘‘good cause’’
exemption in section 553(b)(3)(B) of the
Administrative Procedure Act (APA)
which, upon finding ‘‘good cause,’’
authorizes agencies to dispense with
SUPPLEMENTARY INFORMATION:
PO 00000
Frm 00020
Fmt 4700
Sfmt 4700
public participation where public notice
and comment procedures are
impracticable, unnecessary, or contrary
to the public interest. Public notice and
comment for this action are unnecessary
because today’s action to correct errors
in 40 CFR part 63 has no substantive
impact on EPA’s May 13, 2009 (74 FR
22437), and EPA’s April 14, 2010 (75 FR
19252), approval of delegation
agreements of the 40 CFR part 63
National Emission Standards for
Hazardous Air Pollutants for the states
of Kentucky and Louisiana. This action
makes no substantive difference to
EPA’s analysis as set out in those rules.
In addition, EPA can identify no
particular reason why the public would
be interested in being notified of the
correction of these paragraphs or in
having the opportunity to comment on
the correction prior to this action being
finalized, since this correction action
does not change the meaning of EPA’s
analysis of Kentucky’s submittal
approved by EPA May 13, 2009, or
Louisiana’s submittals approved by EPA
April 14, 2010. EPA also finds that there
is good cause under APA section
553(d)(3) for this correction to become
effective on the date of publication of
this action. Section 553(d)(3) of the APA
allows an effective date less than 30
days after publication ‘‘as otherwise
provided by the agency for good cause
found and published with the rule.’’ 5
U.S.C. 553(d)(3). The purpose of the 30day waiting period prescribed in APA
section 553(d)(3) is to give affected
parties a reasonable time to adjust their
behavior and prepare before the final
rule takes effect. Today’s rule does not
create any new regulatory requirements
such that affected parties would need
time to prepare before the rule takes
effect. Rather, today’s action merely
corrects an error in the regulatory text
of a prior rule by correcting the 40 CFR
part 63 delegations of authority of the 40
CFR Part 63 National Emission
Standards for Hazardous Air Pollutants
for the states of Kentucky and Louisiana
approved by EPA May 13, 2009, and
April 14, 2010, respectively. For these
reasons, EPA finds good cause under
APA section 553(d)(3) for this correction
to become effective on the date of
publication of this action.
Statutory and Executive Order Reviews
Under Executive Order 12866 (58 FR
51735, October 4, 1993), this action is
not a ‘‘significant regulatory action’’ and
therefore is not subject to review by the
Office of Management and Budget. For
this reason, this action is also not
subject to Executive Order 13211,
‘‘Actions Concerning Regulations That
Significantly Affect Energy Supply,
E:\FR\FM\04APR1.SGM
04APR1
Federal Register / Vol. 78, No. 65 / Thursday, April 4, 2013 / Rules and Regulations
Distribution, or Use’’ (66 FR 28355, May
22, 2001). This action merely approves
state law as meeting Federal
requirements and imposes no additional
requirements beyond those imposed by
state law. Accordingly, the
Administrator certifies that this rule
will not have a significant economic
impact on a substantial number of small
entities under the Regulatory Flexibility
Act (5 U.S.C. 601 et seq.). Because this
rule approves pre-existing requirements
under state law and does not impose
any additional enforceable duty beyond
that required by state law, it does not
contain any unfunded mandate or
significantly or uniquely affect small
governments, as described in the
Unfunded Mandates Reform Act of 1995
(Pub. L. 104–4).
This rule also does not have tribal
implications because it will not have a
substantial direct effect on one or more
Indian tribes, on the relationship
between the Federal Government and
Indian tribes, or on the distribution of
power and responsibilities between the
Federal Government and Indian tribes,
as specified by Executive Order 13175
(59 FR 22951, November 9, 2000). This
rule also does not have Federalism
implications because it does not have
substantial direct effects on the states,
on the relationship between the national
government and the states, or on the
distribution of power and
responsibilities among the various
levels of government, as specified in
Executive Order 13132 (64 FR 43255,
August 10, 1999). This rule merely
corrects states requests to receive
delegation of certain Federal standards,
and does not alter the relationship or
the distribution of power and
responsibilities established in the Clean
Air Act. This rule also is not subject to
Executive Order 13045 ‘‘Protection of
Children from Environmental Health
Risks and Safety Risks’’ (62 FR 19885,
April 23, 1997), because it is not
economically significant.
This rule does not involve technical
standards, thus the requirements of
section 12(d) of the National
Technology Transfer and Advancement
Act of 1995 (15 U.S.C. 272 note) do not
apply. This rule does not impose an
information collection burden under the
provisions of the Paperwork Reduction
Act of 1995 (44 U.S.C. 3501 et seq.).
The Congressional Review Act, 5
U.S.C. 801 et seq., as added by the Small
Business Regulatory Enforcement
Fairness Act of 1996, generally provides
that before a rule may take effect, the
agency promulgating the rule must
submit a rule report, which includes a
copy of the rule, to each House of the
Congress and to the Comptroller General
of the United States. EPA will submit a
report containing this rule and other
required information to the U.S. Senate,
the U.S. House of Representatives, and
the Comptroller General of the United
States prior to publication of the rule in
the Federal Register. A major rule
cannot take effect until 60 days after it
is published in the Federal Register.
This action is not a ‘‘major rule’’ as
defined by 5 U.S.C. 804(2).
Under section 307(b)(1) of the Clean
Air Act, petitions for judicial review of
this action must be filed in the United
States Court of Appeals for the
appropriate circuit by June 3, 2013.
Filing a petition for reconsideration by
the Administrator of this final rule does
not affect the finality of this action for
the purposes of judicial review nor does
it extend the time within which a
petition for judicial review may be filed,
and shall not postpone the effectiveness
of such rule or action. This action may
not be challenged later in proceedings to
20247
enforce its requirements. (See section
307(b)(2).)
List of Subjects in 40 CFR Part 63
Environmental protection, Air
pollution control, Hazardous
substances, Intergovernmental relations,
Reporting and recordkeeping
requirements.
Dated: March 22, 2013.
Samuel Coleman,
Acting Regional Administrator, Region 6.
40 CFR part 63 is amended as follows:
PART 63—[AMENDED]
1. The authority citation for part 63
continues to read as follows:
■
Authority: 42 U.S.C. 7401 et seq.
Subpart E—Approval of State
Programs and Delegation of Federal
Authorities
2. Section 63.99 is amended by
revising paragraph (a)(18) for Kentucky
and paragraph (a)(19) for Louisiana to
read as follows:
■
§ 63.99
Delegated Federal Authorities.
(a) * * *
(18) Kentucky.
(i) The following table lists the
specific part 63 standards that have
been delegated unchanged to the
Kentucky Department of Environmental
Protection for all sources. The ‘‘X’’
symbol is used to indicate each subpart
that has been delegated. The delegations
are subject to all of the conditions and
limitations set forth in Federal law,
regulations, policy, guidance, and
determinations. Some authorities cannot
be delegated and are retained by EPA.
These include certain General
Provisions authorities and specific parts
of some standards.
PART 63 MAJOR AND AREA SOURCE RULE DELEGATIONS—KENTUCKY 1
wreier-aviles on DSK5TPTVN1PROD with RULES
Source category
1 .............
2 .............
3 .............
4 .............
5 .............
6 .............
7 .............
8 .............
9 .............
10 ...........
11 ...........
12 ...........
13 ...........
14 ...........
15 ...........
16 ...........
17 ...........
18 ...........
Subpart
KDEP 2
LAPCD 3
HON ...........................................................................................................................................
Polyvinyl Chloride & Co-polymers VACATED on 5/11/05 ........................................................
Coke Ovens ...............................................................................................................................
Dry Cleaners ..............................................................................................................................
Chromium Electroplating ...........................................................................................................
EtO Commercial Sterilization .....................................................................................................
Chromium Cooling Towers ........................................................................................................
Gasoline Distribution (stage 1) ..................................................................................................
Pulp & Paper I ...........................................................................................................................
Halogenated Solvent Cleaning ..................................................................................................
Polymer & Resins 1 ...................................................................................................................
Polymer & Resins 2 ...................................................................................................................
Secondary Lead Smelters .........................................................................................................
Marine Tank Vessel Loading .....................................................................................................
Phosphoric Acid Mfg ..................................................................................................................
Phosphate Fertilizers Prod ........................................................................................................
Petroleum Refineries .................................................................................................................
Offsite Waste & Recovery .........................................................................................................
Tanks; Level 1 ....................................................................................................................
F,G,H,I .........
J ..................
L ..................
M .................
N .................
O .................
Q .................
R ..................
S ..................
T ..................
U .................
W .................
X ..................
Y ..................
AA ...............
BB ...............
CC ...............
DD ...............
OO ...............
X
................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
VerDate Mar<15>2010
14:43 Apr 03, 2013
Jkt 229001
PO 00000
Frm 00021
Fmt 4700
Sfmt 4700
E:\FR\FM\04APR1.SGM
04APR1
20248
Federal Register / Vol. 78, No. 65 / Thursday, April 4, 2013 / Rules and Regulations
PART 63 MAJOR AND AREA SOURCE RULE DELEGATIONS—KENTUCKY 1—Continued
Source category
19 ...........
20 ...........
21 ...........
22
23
24
25
26
27
...........
...........
...........
...........
...........
...........
wreier-aviles on DSK5TPTVN1PROD with RULES
28 ...........
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
Subpart
KDEP 2
LAPCD 3
Containers ..........................................................................................................................
Surface Impoundments ......................................................................................................
Drain Systems ....................................................................................................................
Oil-Water Separators ..........................................................................................................
Magnetic Tape ...........................................................................................................................
Aerospace Industry ....................................................................................................................
Oil & Natural Gas Prod ..............................................................................................................
Area Source Requirements >>. ..........................................................................................
Shipbuilding and Repair ............................................................................................................
Wood Furniture Mfg ...................................................................................................................
Printing & Publishing .................................................................................................................
Primary Aluminum .....................................................................................................................
Pulp & Paper II (Combustion sources) ......................................................................................
Generic MACT:
Control Devices ..................................................................................................................
Eq. Leaks—Level 1 ............................................................................................................
Eq. Leaks—Level 2 ............................................................................................................
Tanks—Level 2 ...................................................................................................................
General MACT:
Ethylene Mfg .......................................................................................................................
Carbon Black ......................................................................................................................
Spandex Prod .....................................................................................................................
Cyanide Chemical Mfg .......................................................................................................
Acetal Resins ......................................................................................................................
Acrylic/Modacrylic Fibers ....................................................................................................
Hydrogen Fluoride Prod .....................................................................................................
Polycarbonates Prod ..........................................................................................................
Steel Pickling .............................................................................................................................
Mineral Wool Prod .....................................................................................................................
Hazardous Waste Combustion (Phase I) ..................................................................................
Boilers that burn Haz. Waste (Phase II) ...................................................................................
HCL Prod. Furnaces burning Haz. Waste (P II) .......................................................................
Pharmaceutical Prod .................................................................................................................
Nat. Gas Transmission & Storage .............................................................................................
Flexible Polyurethane Foam Prod .............................................................................................
Polymer & Resins 4 ...................................................................................................................
Portland Cement ........................................................................................................................
Pesticide Active Ingredients ......................................................................................................
Wool Fiberglass .........................................................................................................................
Polymer & Resins 3 (Amino & Phenolic) ..................................................................................
Polyether Polyols Prod ..............................................................................................................
Primary Copper ..........................................................................................................................
Secondary Aluminum Prod ........................................................................................................
Primary Lead Smelting ..............................................................................................................
Petro Refineries (FCC units) .....................................................................................................
POTW ........................................................................................................................................
Ferroalloys .................................................................................................................................
Municipal Landfills .....................................................................................................................
Nutritional Yeast ........................................................................................................................
Plywood and Composite Wood Prod. (Partial Vacatur Oct. 07) ...............................................
Organic Liquids Distribution (non-gas) ......................................................................................
Misc. Organic NESHAP .............................................................................................................
Vegetable Oil .............................................................................................................................
Wet Formed Fiberglass .............................................................................................................
Auto & Light Duty Truck (coating) .............................................................................................
Paper & Other Webs .................................................................................................................
Metal Can (coating) ...................................................................................................................
Misc. Metal Parts (coating) ........................................................................................................
Large Appliances (coating) ........................................................................................................
Printing, Coating, & Dyeing Fabrics ..........................................................................................
Plastic Parts & Products (coating) .............................................................................................
Wood Building Products ............................................................................................................
Metal Furniture (coating) ...........................................................................................................
Metal Coil (coating) ....................................................................................................................
Leather Tanning & Finishing .....................................................................................................
Cellulose Ethers Prod. Misc. Viscose Processes .....................................................................
Boat Manufacturing ....................................................................................................................
Reinforced Plastic Composites ..................................................................................................
Rubber Tire Mfg .........................................................................................................................
Stationary Combustion Turbines ...............................................................................................
Reciprocating Int. Combustion Engines ....................................................................................
Area Source Requirements >>. ..........................................................................................
PP ...............
QQ ...............
RR ...............
VV ...............
EE ...............
GG ..............
HH ...............
X ..................
II ..................
JJ ................
KK ...............
LL ................
MM ..............
X
X
X
X
X
X
X
................
X
X
X
X
X
X
X
X
X
X
X
X
................
X
X
X
................
X
SS ...............
TT ................
UU ...............
WW .............
X
X
X
X
X
X
X
X
XX & YY ......
YY ...............
YY ...............
YY ...............
YY ...............
YY ...............
YY ...............
YY ...............
CCC ............
DDD ............
EEE .............
EEE .............
EEE .............
GGG ............
HHH ............
III .................
JJJ ...............
LLL ..............
MMM ...........
NNN ............
OOO ............
PPP .............
QQQ ............
RRR ............
TTT ..............
UUU ............
VVV .............
XXX .............
AAAA ...........
CCCC ..........
DDDD ..........
EEEE ...........
FFFF ...........
GGGG .........
HHHH ..........
IIII ................
JJJJ .............
KKKK ..........
MMMM ........
NNNN ..........
OOOO .........
PPPP ...........
QQQQ .........
RRRR ..........
SSSS ...........
TTTT ...........
UUUU ..........
VVVV ...........
WWWW .......
XXXX ...........
YYYY ...........
ZZZZ ...........
X ..................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
................
VerDate Mar<15>2010
14:43 Apr 03, 2013
Jkt 229001
PO 00000
Frm 00022
Fmt 4700
Sfmt 4700
E:\FR\FM\04APR1.SGM
04APR1
Federal Register / Vol. 78, No. 65 / Thursday, April 4, 2013 / Rules and Regulations
20249
PART 63 MAJOR AND AREA SOURCE RULE DELEGATIONS—KENTUCKY 1—Continued
Source category
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
Subpart
KDEP 2
LAPCD 3
Lime Manufacturing ...................................................................................................................
Semiconductor Production .........................................................................................................
Coke Ovens: (Push/Quench/Battery/Stacks) ............................................................................
Industrial/Commercial/Institutional Boilers & Process Heaters, VACATED on 7/30/07. ...........
Iron Foundries ............................................................................................................................
Integrated Iron & Steel ..............................................................................................................
Site Remediation .......................................................................................................................
Misc. Coating Manufacturing .....................................................................................................
Mercury Cell Chlor-Alkali ...........................................................................................................
Brick & Structural Clay Products, VACATED on 6/18/07 .........................................................
Clay Ceramics Manufacturing, VACATED on 6/18/07 ..............................................................
Asphalt Roofing & Processing ...................................................................................................
Flex. Polyurethane Foam Fabrication .......................................................................................
Hydrochloric Acid Prod/Fumed Silica ........................................................................................
Engine & Rocket Test Facilities ................................................................................................
Friction Materials Manufacturing ...............................................................................................
Taconite Iron Ore .......................................................................................................................
Refactories .................................................................................................................................
Primary Magnesium ...................................................................................................................
AAAAA ........
BBBBB ........
CCCCC .......
DDDDD .......
EEEEE ........
FFFFF .........
GGGGG ......
HHHHH .......
IIIII ...............
JJJJJ ...........
KKKKK ........
LLLLL ..........
MMMMM .....
NNNNN .......
PPPPP ........
QQQQQ ......
RRRRR .......
SSSSS ........
TTTTT .........
X
X
X
................
X
X
X
X
X
................
................
X
X
X
X
X
X
X
X
X
X
X
................
X
X
X
X
X
................
................
X
X
X
X
X
X
X
X
WWWWW ...
YYYYY ........
ZZZZZ .........
BBBBBB ......
CCCCCC .....
DDDDDD .....
EEEEEE ......
FFFFFF .......
GGGGGG ...
HHHHHH .....
LLLLLL ........
MMMMMM ..
NNNNNN .....
OOOOOO ...
PPPPPP ......
QQQQQQ ...
RRRRRR .....
SSSSSS ......
TTTTTT .......
WWWWWW
XXXXXX ......
.....................
.....................
.....................
.....................
.....................
.....................
.....................
.....................
.....................
YYYYYY ......
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
................
Ares Source Rules
92 ...........
93 ...........
94 ...........
95 ...........
96 ...........
97 ...........
98 ...........
99 ...........
100 .........
101 .........
102 .........
103 .........
104 .........
105 .........
106 .........
107 .........
108 .........
109 .........
110 .........
111 .........
112 .........
113 .........
1 State
Hospital Sterilizers .....................................................................................................................
Electric Arc Furnaces Stainless and Nonstainless Steel Mfg ...................................................
Iron & Steel foundries ................................................................................................................
Gasoline Distribution—Bulk .......................................................................................................
Gasoline Dispensing Facilities ...................................................................................................
PVC & Copolymers Prod ...........................................................................................................
Primary Copper ..........................................................................................................................
Secondary Copper Smelting ......................................................................................................
Primary Nonferrous Metals Paint Stripping ...............................................................................
Auto-Body Refinishing Plastic Parts & Prod. (coating) .............................................................
Acrylic/Modacrylic Fibers Prod ..................................................................................................
Carbon Black Prod ....................................................................................................................
Chemical Mfg. Chrom Flex. Polyurethane Foam Fab ...............................................................
Flex. Polyurethane Foam Prod ..................................................................................................
Lead Acid Battery Mfg ...............................................................................................................
Wood Preserving .......................................................................................................................
Clay Ceramics Mfg ....................................................................................................................
Glass Mfg ...................................................................................................................................
Secondary Nonferrous Metals ...................................................................................................
Plating and Polishing .................................................................................................................
Hearing Eq. Mfg .........................................................................................................................
Industrial Mach. & Eq. Finishing ................................................................................................
Elect. & Electronics Eq. Finishing .............................................................................................
Fabricated Metal Prod ...............................................................................................................
Fabricated Plate Work (Boiler Shop) .........................................................................................
Fabricated Structural Metal Mfg ................................................................................................
Iron and Steel Forging ...............................................................................................................
Primary Metals Prod. Mfg ..........................................................................................................
Valves and Pipe Fittings Mfg .....................................................................................................
Ferroalloys Production ...............................................................................................................
Ferro/Silico Manganese .............................................................................................................
program approved on October 31, 2001. Delegation table last updated on April 1, 2009.
Department for Environmental Protection.
Air Pollution Control District.
2 Kentucky
wreier-aviles on DSK5TPTVN1PROD with RULES
3 Louisville
(ii) [Reserved]
(19) Louisiana.
(i) The following table lists the
specific part 63 standards that have
been delegated unchanged to the
Louisiana Department of Environmental
Quality for all sources. The ‘‘X’’ symbol
VerDate Mar<15>2010
14:43 Apr 03, 2013
Jkt 229001
is used to indicate each subpart that has
been delegated. The delegations are
subject to all of the conditions and
limitations set forth in Federal law,
regulations, policy, guidance, and
determinations. Some authorities cannot
PO 00000
Frm 00023
Fmt 4700
Sfmt 4700
be delegated and are retained by EPA.
These include certain General
Provisions authorities and specific parts
of some standards. Any amendments
made to these rules after the date of
adoption are not delegated.
E:\FR\FM\04APR1.SGM
04APR1
20250
Federal Register / Vol. 78, No. 65 / Thursday, April 4, 2013 / Rules and Regulations
DELEGATION STATUS FOR PART 63 STANDARDS—STATE OF LOUISIANA
wreier-aviles on DSK5TPTVN1PROD with RULES
Subpart
Source category
LDEQ 1
A ..................
D ..................
F,G,H & I .....
J ..................
L ..................
M .................
N ..................
O .................
Q .................
R ..................
S ..................
T ..................
U ..................
W .................
X ..................
Y ..................
AA/BB ..........
CC ...............
DD ...............
EE ...............
GG ...............
HH ...............
II ..................
JJ .................
KK ...............
LL ................
MM ..............
OO ...............
PP ...............
QQ ...............
RR ...............
SS ...............
TT ................
UU ...............
VV ...............
WW .............
XX ...............
YY ...............
YY ...............
YY ...............
YY ...............
YY ...............
YY ...............
YY ...............
YY ...............
CCC ............
DDD ............
EEE .............
GGG ............
HHH ............
III .................
JJJ ...............
LLL ..............
MMM ...........
NNN ............
OOO ............
PPP .............
QQQ ............
RRR ............
TTT ..............
UUU ............
VVV .............
XXX .............
ZZZ ..............
AAAA ...........
CCCC ..........
DDDD ..........
EEEE ...........
FFFF ...........
GGGG .........
HHHH ..........
IIII ................
General Provisions .............................................................................................................................................................
Early Reductions ................................................................................................................................................................
SOCMI HON ......................................................................................................................................................................
Polyvinyl Chloride & Copolymers Production ....................................................................................................................
Coke Oven Batteries ..........................................................................................................................................................
Perchloroethylene—Dry Cleaners ......................................................................................................................................
Chromium ...........................................................................................................................................................................
Ethylene Oxide Sterilization ...............................................................................................................................................
Industrial Process Cooling Towers ....................................................................................................................................
Gasoline Distribution ..........................................................................................................................................................
Pulp & Paper MACT I ........................................................................................................................................................
Halogenated Solvent ..........................................................................................................................................................
Polymers & Resins/Group I ...............................................................................................................................................
Epoxy Resins and Non-Nylon Polyamides ........................................................................................................................
Secondary Lead Smelting ..................................................................................................................................................
Marine Vessel Loading ......................................................................................................................................................
Phosphoric Acid/Phosphate Fertilizers ..............................................................................................................................
Petroleum Refineries (MACT I) ..........................................................................................................................................
Offsite Waste & Recovery ..................................................................................................................................................
Magnetic Tape Mfg ............................................................................................................................................................
Aerospace Mfg and Rework ..............................................................................................................................................
Oil & Natural Gas Production ............................................................................................................................................
Shipbuilding & Ship Repair ................................................................................................................................................
Wood Furniture Manufacturing ..........................................................................................................................................
Printing & Publishing ..........................................................................................................................................................
Primary Aluminum Reduction Plants .................................................................................................................................
Combustion Sources at Kraft, Soda, and Sulfite Pulp & Paper Mills ................................................................................
Storage Vessels (Tanks)—Control Level 1 .......................................................................................................................
Standards for Containers ...................................................................................................................................................
Standards for Surface Impoundments ...............................................................................................................................
Standards for Individual Drain Systems ............................................................................................................................
Closed Vent Systems, Control Devices, Recovery Devices & Routing to a Fuel Gas System or a Process ..................
Equipment Leaks—Control Level 1 ...................................................................................................................................
Equipment Leaks—Control Level 2 ...................................................................................................................................
Standards for Oil-Water Separators & Organic-Water Separators ...................................................................................
Storage Vessels (Tanks)—Control Level 2 .......................................................................................................................
Ethylene Manufacturing Process Units: Heat Exchange Systems & Waste Operations ..................................................
Acetal Resins .....................................................................................................................................................................
Acrylic/Modacrylic Fibers ...................................................................................................................................................
Carbon Black Production ...................................................................................................................................................
Cyanide Chemicals Mfg .....................................................................................................................................................
Ethylene Production ...........................................................................................................................................................
Hydrogen Fluoride ..............................................................................................................................................................
Polycarbonates Production ................................................................................................................................................
Spandex Production ...........................................................................................................................................................
Steel Pickling—HCL Process Facilities and Hydrochloric Acid Regeneration Plants .......................................................
Standards for Mineral-Wool Production .............................................................................................................................
Standards for Hazardous Waste Combustors ...................................................................................................................
Standards for Pharmaceuticals Production .......................................................................................................................
Standards for Natural Gas Transmission & Storage .........................................................................................................
Flexible Polyurethane Foam Production ............................................................................................................................
Polymers & Resins/Group IV .............................................................................................................................................
Portland Cement Manufacturing ........................................................................................................................................
Pesticide Active Ingredient Production ..............................................................................................................................
Wool Fiberglass .................................................................................................................................................................
Polymers & Resins III Amino Resins, Phenolic Resins .....................................................................................................
Polyether Polyols Production .............................................................................................................................................
Primary Copper Smelting ...................................................................................................................................................
Secondary Aluminum Production .......................................................................................................................................
Primary Lead Smelting .......................................................................................................................................................
Petroleum Refineries (Catalytic Cracking Units, Catalytic Reforming Units and Sulfur Recovery Plants) .......................
Publicly Owned Treatment Works (POTW) .......................................................................................................................
Ferroalloys Production .......................................................................................................................................................
Plywood/Particle Board Manufacturing ..............................................................................................................................
Municipal Solid Waste Landfills .........................................................................................................................................
Nutritional Yeast Manufacturing .........................................................................................................................................
Plywood & Composite Wood Products ..............................................................................................................................
Organic Liquids Distribution (Non-Gasoline) .....................................................................................................................
Miscellaneous Organic .......................................................................................................................................................
Solvent Extraction for Vegetable Oil Production ...............................................................................................................
Wet-Formed Fiberglass Mat Production ............................................................................................................................
Auto & Light Duty Truck (Surface Coating) .......................................................................................................................
X
NO
X
NO 2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
NO
X
X
NO
X
X
X
X
X
VerDate Mar<15>2010
14:43 Apr 03, 2013
Jkt 229001
PO 00000
Frm 00024
Fmt 4700
Sfmt 4700
E:\FR\FM\04APR1.SGM
04APR1
Federal Register / Vol. 78, No. 65 / Thursday, April 4, 2013 / Rules and Regulations
20251
DELEGATION STATUS FOR PART 63 STANDARDS—STATE OF LOUISIANA—Continued
Subpart
Source category
LDEQ 1
JJJJ .............
KKKK ...........
MMMM ........
NNNN ..........
OOOO .........
PPPP ...........
QQQQ .........
RRRR ..........
SSSS ...........
TTTT ...........
UUUU ..........
VVVV ...........
WWWW .......
XXXX ...........
YYYY ...........
ZZZZ ...........
AAAAA ........
BBBBB ........
CCCCC .......
DDDDD .......
EEEEE ........
FFFFF .........
GGGGG ......
HHHHH .......
IIIII ...............
JJJJJ ...........
KKKKK ........
LLLLL ..........
MMMMM .....
NNNNN .......
PPPPP ........
QQQQQ ......
RRRRR .......
SSSSS ........
TTTTT .........
YYYYY ........
BBBBBB ......
CCCCCC .....
DDDDDD .....
EEEEEE ......
FFFFFF .......
GGGGGG ...
HHHHHH .....
LLLLLL ........
MMMMMM ..
NNNNNN .....
PPPPPP ......
QQQQQQ ...
RRRRRR .....
SSSSSS ......
TTTTTT .......
UUUUUU—
VVVVVV.
WWWWWW
XXXXXX ......
YYYYYY ......
ZZZZZZ .......
Paper & Other Webs (Surface Coating) ............................................................................................................................
Metal Can (Surface Coating) .............................................................................................................................................
Misc. Metal Parts (Surface Coating) ..................................................................................................................................
Large Appliances (Surface Coating) ..................................................................................................................................
Fabric Printing, Coating & Dyeing (Surface Coating) ........................................................................................................
Plastic Parts & Products (Surface Coating) .......................................................................................................................
Wood Building Products (formerly Flat Wood Paneling) (Surface Coating) .....................................................................
Metal Furniture (Surface Coating) .....................................................................................................................................
Metal Coil (Surface Coating) ..............................................................................................................................................
Leather-Finishing Operations .............................................................................................................................................
Cellulose Products .............................................................................................................................................................
Boat Manufacturing ............................................................................................................................................................
Reinforced Plastics Composites Production ......................................................................................................................
Rubber Tire Manufacturing ................................................................................................................................................
Combustion Turbines .........................................................................................................................................................
Reciprocating Internal Combustion Engines (RICE) .........................................................................................................
Lime Manufacturing Plants ................................................................................................................................................
Semiconductor Manufacturing ...........................................................................................................................................
Coke Oven; Pushing, Quenching, and Battery Stacks ......................................................................................................
Industrial, Commercial and Institutional Boilers & Process Heaters .................................................................................
Iron & Steel Foundries .......................................................................................................................................................
Integrated Iron & Steel Manufacturing Facilities ................................................................................................................
Site Remediation ................................................................................................................................................................
Miscellaneous Coating Manufacturing ...............................................................................................................................
Mercury Cell Chlor-Alkali Plants ........................................................................................................................................
Brick & Structural Clay Products Manufacturing ...............................................................................................................
Clay Ceramics Manufacturing ............................................................................................................................................
Asphalt Roofing and Processing ........................................................................................................................................
Flexible Polyurethane Foam Fabrication Operation ..........................................................................................................
Hydrochloric Acid Production .............................................................................................................................................
Engine Test Cells/Stands (Combined w/Rocket Testing Facilities) ..................................................................................
Friction Products Manufacturing ........................................................................................................................................
Taconite Ore Processing ...................................................................................................................................................
Refractory Products Manufacturing ...................................................................................................................................
Primary Magnesium Refining .............................................................................................................................................
Electric Arc Furnace Steelmaking Facilities ......................................................................................................................
Gasoline Distribution Terminals .........................................................................................................................................
Gasoline Dispensing Facilities ...........................................................................................................................................
Polyvinyl Chloride and Copolymers Production .................................................................................................................
Primary Copper Smelting ...................................................................................................................................................
Secondary Copper Smelting ..............................................................................................................................................
Primary Nonferrous Metals Zinc, Cadmium, and Beryllium ..............................................................................................
Paint Stripping and Miscellaneous Surface Coating .........................................................................................................
Acrylic/Modacrylic Fibor .....................................................................................................................................................
Carbon Black Production ...................................................................................................................................................
Chromium Compounds ......................................................................................................................................................
Lead Acid Battery Mfg. ......................................................................................................................................................
Wood Preserving ................................................................................................................................................................
Clay Ceramics Mfg. ............................................................................................................................................................
Glass Manufacturing ..........................................................................................................................................................
Secondary Nonferrous Metals Processing (Brass, Bronze, Magnesium, & Zinc) .............................................................
(Reserved). .........................................................................................................................................................................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
NO 2
X
X
X
X
NO 2
NO 2
NO 2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
................
Plating and Polishing Operations .......................................................................................................................................
Metal Fabrication & Finishing Source Nine Categories .....................................................................................................
Ferroalloys Production Facilities ........................................................................................................................................
(Reserved). .........................................................................................................................................................................
X
X
X
................
1 Federal
Rules Adopted by Louisiana Department of Environmental Quality (LDEQ), unchanged as of June 16, 2006.
previously delegated to some States, this standard has been vacated and remanded to EPA by the U.S. Court of Appeals for District of Columbia Circuit. Therefore, this standard is not delegated at this time to any States in Region 6.
wreier-aviles on DSK5TPTVN1PROD with RULES
2 Although
*
*
*
*
*
[FR Doc. 2013–07540 Filed 4–3–13; 8:45 am]
BILLING CODE 6560–50–P
VerDate Mar<15>2010
16:59 Apr 03, 2013
Jkt 229001
PO 00000
Frm 00025
Fmt 4700
Sfmt 4700
E:\FR\FM\04APR1.SGM
04APR1
20252
Federal Register / Vol. 78, No. 65 / Thursday, April 4, 2013 / Rules and Regulations
ENVIRONMENTAL PROTECTION
AGENCY
40 CFR Part 131
[EPA–HQ–OW–2012–0095; FRL–9795–8]
RIN 2040–AF33
Water Quality Standards; Withdrawal
of Certain Federal Water Quality
Criteria Applicable to California, New
Jersey and Puerto Rico
Environmental Protection
Agency (EPA).
ACTION: Final rule.
AGENCY:
EPA is taking final action to
amend the federal regulations to
withdraw certain human health and
aquatic life water quality criteria
applicable to waters of New Jersey,
Puerto Rico, and California’s San
Francisco Bay. In 1992, EPA
promulgated the National Toxics Rule
or NTR to establish numeric water
quality criteria for 12 states and two
Territories, including New Jersey,
Puerto Rico and parts of California. On
May 18, 2000, EPA then promulgated a
final rule known as the California
Toxics Rule or CTR in order to establish
numeric water quality criteria for
priority toxic pollutants for the State of
California that were not previously in
the NTR. These two states and one
territory have now adopted, and EPA
has approved, water quality criteria for
certain pollutants included in the NTR.
Since California, New Jersey, and Puerto
Rico now have criteria that are
applicable water quality standards for
purposes of the Clean Water Act, EPA
has determined that the federally
promulgated criteria are no longer
needed for these pollutants. In today’s
action, EPA is amending the federal
regulations to withdraw those certain
criteria applicable to California, New
Jersey, and Puerto Rico as described in
the April 5, 2012 proposed rule. The
withdrawal of the federally promulgated
criteria will enable New Jersey, Puerto
Rico, and California to implement their
EPA-approved water quality criteria.
DATES: This final rule is effective on
June 3, 2013.
ADDRESSES: EPA has established a
docket for this action identified by
Docket ID No. EPA–HQ–OW–2012–
0095. For additional information about
EPA’s public docket visit the EPA
Docket Center homepage at https://
www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket
are listed in the www.regulations.gov
index. Although listed in the index,
some information is not publicly
available, e.g., CBI or other information
wreier-aviles on DSK5TPTVN1PROD with RULES
SUMMARY:
VerDate Mar<15>2010
16:59 Apr 03, 2013
Jkt 229001
whose disclosure is restricted by statute.
Certain other material, such as
copyrighted material, will be publicly
available only in hard copy. Publicly
available docket materials are available
either electronically in
www.regulations.gov or in hard copy at
two Docket Facilities. The Office of
Water (‘‘OW’’) Docket Center is open
from 8:30 a.m. until 4:30 p.m., Monday
through Friday, excluding legal
holidays. The Docket telephone number
is (202) 566–2426 and the Docket
address is OW Docket, EPA West, Room
3334, 1301 Constitution Ave. NW.,
Washington, DC, 20004. The Public
Reading Room is open from 8:30 a.m. to
4:30 p.m., Monday through Friday,
excluding legal holidays. The telephone
number for the Public Reading Room is
(202) 566–1744. Publicly available
docket materials are also available in
hard copy at the U.S. EPA Region 2 and
U.S. EPA Region 9 addresses. Docket
materials can be accessed from 9:00 a.m.
until 3:00 p.m., Monday through Friday,
excluding legal holidays.
For
information with respect to New Jersey,
contact Wayne Jackson, U.S. EPA,
Region 2, Clean Water Division, 290
Broadway, New York, New York 10007
(telephone: (212) 637–3807 or email:
jackson.wayne@epa.gov). For
information with respect to Puerto Rico,
contact Izabela Wojtenko, U.S. EPA,
Region 2, Clean Water Division, 290
Broadway, New York, NY 10007
(telephone: (212) 637–3814 or email:
wojtenko.izabela@epa.gov). For
information with respect to California,
contact Diane E. Fleck, P.E. Esq., U.S.
EPA Region 9, WTR–2, 75 Hawthorne
St., San Francisco, CA 94105
(telephone: (415) 972–3480 or email:
fleck.diane@epa.gov). For general and
administrative concerns, contact Bryan
‘‘Ibrahim’’ Goodwin, U.S. EPA
Headquarters, Office of Science and
Technology, 1200 Pennsylvania Avenue
NW., Mail Code 4305T, Washington, DC
20460 (telephone: (202) 566–0762 or
email: goodwin.bryan@epa.gov).
FOR FURTHER INFORMATION CONTACT:
SUPPLEMENTARY INFORMATION:
I. General Information
No one is regulated by this rule. This
rule withdraws certain federal water
quality criteria applicable to New Jersey,
Puerto Rico, and California. The
withdrawal of the federal water quality
criteria applicable to New Jersey and
Puerto Rico in this action, in
combination with previous federal
withdrawal actions, results in the
complete removal of New Jersey and
Puerto Rico from the NTR.
PO 00000
Frm 00026
Fmt 4700
Sfmt 4700
Background
In 1992, EPA promulgated the NTR to
establish numeric water quality criteria
for 12 states and two Territories,
including New Jersey, Puerto Rico and
parts of California (hereafter ‘‘States’’)
that had failed to comply fully with
Section 303(c)(2)(B) of the Clean Water
Act or CWA, 33 U.S.C. 1313(c)(2)(B) (57
FR 60848, December 22, 1992). The
criteria codified at 40 CFR 131.36
became the applicable water quality
standards in those 14 States for all
purposes and programs under the CWA
effective February 5, 1993.
On May 18, 2000, EPA then
promulgated a final rule known as the
CTR at 40 CFR 131.38 in order to
establish numeric water quality criteria
for priority toxic pollutants for the State
of California that were not previously in
the NTR, because the State had not
complied fully with Section 303(c)(2)(B)
of the CWA (65 FR 31682). At that time,
any criteria promulgated as part of the
NTR for California were codified in the
criteria tables for the CTR at 40 CFR
131.38. The water quality standards
program was developed with an
emphasis on state primacy. Although in
the NTR and CTR EPA promulgated
toxic criteria for the certain States, EPA
prefers that states maintain primacy and
revise their own standards to achieve
full compliance with the CWA (see 57
FR 60860, December 22, 1992). As
described in the preamble to the final
NTR and CTR, when a State adopts, and
EPA approves, water quality criteria that
meet the requirements of the CWA, EPA
issues a rule amending the NTR and/or
CTR to withdraw the federal criteria
applicable to that State. On April 5,
2012, EPA proposed the withdrawal of
certain criteria for New Jersey, Puerto
Rico and California’s San Francisco Bay
(see 77 FR 20585; April 5, 2012). EPA
received comments for the proposed
rule and a listing of the comments and
EPA’s responses are contained in the
document ‘‘Response to Comments for
Water Quality Standards; Withdrawal of
Certain Federal Water Quality Criteria
Applicable to California, New Jersey
and Puerto Rico.’’ Today, EPA is taking
final action on its proposal. This rule
does not remove any water quality
protections. Rather, it removes a federal
regulation that essentially duplicates
State regulation.
New Jersey
As discussed in the proposal (77 FR
20585; April 5, 2012), this final rule
E:\FR\FM\04APR1.SGM
04APR1
Agencies
[Federal Register Volume 78, Number 65 (Thursday, April 4, 2013)]
[Rules and Regulations]
[Pages 20246-20252]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-07540]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Part 63
[EPA-R06-OAR-2006-0851; FRL-9796-8]
Delegation of National Emission Standards for Hazardous Air
Pollutants for the States of Kentucky and Louisiana, Correcting
Amendments
AGENCY: Environmental Protection Agency (EPA).
ACTION: Final rule; correcting amendments.
-----------------------------------------------------------------------
SUMMARY: On April 14, 2010, EPA published a direct final rule approving
delegations of authority for Louisiana. There was an error in the
amendatory language which resulted in errors in the codification of the
delegated Federal authorities for Kentucky and Louisiana. This action
corrects the errors.
DATES: This correction is effective on April 4, 2013.
FOR FURTHER INFORMATION CONTACT: Bill Deese, Air Planning Section,
(6PD-L), Environmental Protection Agency, Region 6, 1445 Ross Avenue,
Suite 700, Dallas, Texas 75202-2733, telephone (214) 665-7253; fax
number 214-665-7263; email address deese.william@epa.gov.
SUPPLEMENTARY INFORMATION: This action corrects errors in 40 CFR part
63 that resulted from an error in the amendatory language in a 40 CFR
parts 60, 61, and 63 Federal Register direct final rule, delegation of
authority, entitled ``Delegation of New Source Performance Standards
and National Emission Standards for Hazardous Air Pollutants for the
State of Louisiana,'' published April 14, 2010 (75 FR 19252). The error
resulted in the revised Louisiana 40 CFR part 63 delegation of
authority being codified in 40 CFR 63.99(a)(18) for Kentucky rather
than in 40 CFR 63.99(a)(19) for Louisiana. Paragraph 63.99(a)(19) for
Louisiana remained as previously approved by EPA for Louisiana on April
17, 2006 (71 FR 19652). In this action, EPA is correcting the errors in
40 CFR part 63 by replacing paragraph 63.99(a)(18) with the language
approved for Kentucky in a May 13, 2009 (74 FR 22437), direct final
rule, and replacing paragraph 63.99(a)(19) with the language approved
for Louisiana in the April 14, 2010 Federal Register direct final rule.
EPA has determined that today's action falls under the ``good
cause'' exemption in section 553(b)(3)(B) of the Administrative
Procedure Act (APA) which, upon finding ``good cause,'' authorizes
agencies to dispense with public participation where public notice and
comment procedures are impracticable, unnecessary, or contrary to the
public interest. Public notice and comment for this action are
unnecessary because today's action to correct errors in 40 CFR part 63
has no substantive impact on EPA's May 13, 2009 (74 FR 22437), and
EPA's April 14, 2010 (75 FR 19252), approval of delegation agreements
of the 40 CFR part 63 National Emission Standards for Hazardous Air
Pollutants for the states of Kentucky and Louisiana. This action makes
no substantive difference to EPA's analysis as set out in those rules.
In addition, EPA can identify no particular reason why the public would
be interested in being notified of the correction of these paragraphs
or in having the opportunity to comment on the correction prior to this
action being finalized, since this correction action does not change
the meaning of EPA's analysis of Kentucky's submittal approved by EPA
May 13, 2009, or Louisiana's submittals approved by EPA April 14, 2010.
EPA also finds that there is good cause under APA section 553(d)(3) for
this correction to become effective on the date of publication of this
action. Section 553(d)(3) of the APA allows an effective date less than
30 days after publication ``as otherwise provided by the agency for
good cause found and published with the rule.'' 5 U.S.C. 553(d)(3). The
purpose of the 30-day waiting period prescribed in APA section
553(d)(3) is to give affected parties a reasonable time to adjust their
behavior and prepare before the final rule takes effect. Today's rule
does not create any new regulatory requirements such that affected
parties would need time to prepare before the rule takes effect.
Rather, today's action merely corrects an error in the regulatory text
of a prior rule by correcting the 40 CFR part 63 delegations of
authority of the 40 CFR Part 63 National Emission Standards for
Hazardous Air Pollutants for the states of Kentucky and Louisiana
approved by EPA May 13, 2009, and April 14, 2010, respectively. For
these reasons, EPA finds good cause under APA section 553(d)(3) for
this correction to become effective on the date of publication of this
action.
Statutory and Executive Order Reviews
Under Executive Order 12866 (58 FR 51735, October 4, 1993), this
action is not a ``significant regulatory action'' and therefore is not
subject to review by the Office of Management and Budget. For this
reason, this action is also not subject to Executive Order 13211,
``Actions Concerning Regulations That Significantly Affect Energy
Supply,
[[Page 20247]]
Distribution, or Use'' (66 FR 28355, May 22, 2001). This action merely
approves state law as meeting Federal requirements and imposes no
additional requirements beyond those imposed by state law. Accordingly,
the Administrator certifies that this rule will not have a significant
economic impact on a substantial number of small entities under the
Regulatory Flexibility Act (5 U.S.C. 601 et seq.). Because this rule
approves pre-existing requirements under state law and does not impose
any additional enforceable duty beyond that required by state law, it
does not contain any unfunded mandate or significantly or uniquely
affect small governments, as described in the Unfunded Mandates Reform
Act of 1995 (Pub. L. 104-4).
This rule also does not have tribal implications because it will
not have a substantial direct effect on one or more Indian tribes, on
the relationship between the Federal Government and Indian tribes, or
on the distribution of power and responsibilities between the Federal
Government and Indian tribes, as specified by Executive Order 13175 (59
FR 22951, November 9, 2000). This rule also does not have Federalism
implications because it does not have substantial direct effects on the
states, on the relationship between the national government and the
states, or on the distribution of power and responsibilities among the
various levels of government, as specified in Executive Order 13132 (64
FR 43255, August 10, 1999). This rule merely corrects states requests
to receive delegation of certain Federal standards, and does not alter
the relationship or the distribution of power and responsibilities
established in the Clean Air Act. This rule also is not subject to
Executive Order 13045 ``Protection of Children from Environmental
Health Risks and Safety Risks'' (62 FR 19885, April 23, 1997), because
it is not economically significant.
This rule does not involve technical standards, thus the
requirements of section 12(d) of the National Technology Transfer and
Advancement Act of 1995 (15 U.S.C. 272 note) do not apply. This rule
does not impose an information collection burden under the provisions
of the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.).
The Congressional Review Act, 5 U.S.C. 801 et seq., as added by the
Small Business Regulatory Enforcement Fairness Act of 1996, generally
provides that before a rule may take effect, the agency promulgating
the rule must submit a rule report, which includes a copy of the rule,
to each House of the Congress and to the Comptroller General of the
United States. EPA will submit a report containing this rule and other
required information to the U.S. Senate, the U.S. House of
Representatives, and the Comptroller General of the United States prior
to publication of the rule in the Federal Register. A major rule cannot
take effect until 60 days after it is published in the Federal
Register. This action is not a ``major rule'' as defined by 5 U.S.C.
804(2).
Under section 307(b)(1) of the Clean Air Act, petitions for
judicial review of this action must be filed in the United States Court
of Appeals for the appropriate circuit by June 3, 2013. Filing a
petition for reconsideration by the Administrator of this final rule
does not affect the finality of this action for the purposes of
judicial review nor does it extend the time within which a petition for
judicial review may be filed, and shall not postpone the effectiveness
of such rule or action. This action may not be challenged later in
proceedings to enforce its requirements. (See section 307(b)(2).)
List of Subjects in 40 CFR Part 63
Environmental protection, Air pollution control, Hazardous
substances, Intergovernmental relations, Reporting and recordkeeping
requirements.
Dated: March 22, 2013.
Samuel Coleman,
Acting Regional Administrator, Region 6.
40 CFR part 63 is amended as follows:
PART 63--[AMENDED]
0
1. The authority citation for part 63 continues to read as follows:
Authority: 42 U.S.C. 7401 et seq.
Subpart E--Approval of State Programs and Delegation of Federal
Authorities
0
2. Section 63.99 is amended by revising paragraph (a)(18) for Kentucky
and paragraph (a)(19) for Louisiana to read as follows:
Sec. 63.99 Delegated Federal Authorities.
(a) * * *
(18) Kentucky.
(i) The following table lists the specific part 63 standards that
have been delegated unchanged to the Kentucky Department of
Environmental Protection for all sources. The ``X'' symbol is used to
indicate each subpart that has been delegated. The delegations are
subject to all of the conditions and limitations set forth in Federal
law, regulations, policy, guidance, and determinations. Some
authorities cannot be delegated and are retained by EPA. These include
certain General Provisions authorities and specific parts of some
standards.
Part 63 Major and Area Source Rule Delegations--Kentucky \1\
------------------------------------------------------------------------
Source category Subpart KDEP \2\ LAPCD \3\
------------------------------------------------------------------------
1............ HON............ F,G,H,I......... X X
2............ Polyvinyl J............... .......... ..........
Chloride & Co-
polymers
VACATED on 5/
11/05.
3............ Coke Ovens..... L............... X X
4............ Dry Cleaners... M............... X X
5............ Chromium N............... X X
Electroplating.
6............ EtO Commercial O............... X X
Sterilization.
7............ Chromium Q............... X X
Cooling Towers.
8............ Gasoline R............... X X
Distribution
(stage 1).
9............ Pulp & Paper I. S............... X X
10........... Halogenated T............... X X
Solvent
Cleaning.
11........... Polymer & U............... X X
Resins 1.
12........... Polymer & W............... X X
Resins 2.
13........... Secondary Lead X............... X X
Smelters.
14........... Marine Tank Y............... X X
Vessel Loading.
15........... Phosphoric Acid AA.............. X X
Mfg.
16........... Phosphate BB.............. X X
Fertilizers
Prod.
17........... Petroleum CC.............. X X
Refineries.
18........... Offsite Waste & DD.............. X X
Recovery.
Tanks; Level OO.............. X X
1.
[[Page 20248]]
Containers.. PP.............. X X
Surface QQ.............. X X
Impoundment
s.
Drain RR.............. X X
Systems.
Oil-Water VV.............. X X
Separators.
19........... Magnetic Tape.. EE.............. X X
20........... Aerospace GG.............. X X
Industry.
21........... Oil & Natural HH.............. X X
Gas Prod.
Area Source X............... .......... ..........
Requirement
s >>..
22........... Shipbuilding II.............. X X
and Repair.
23........... Wood Furniture JJ.............. X X
Mfg.
24........... Printing & KK.............. X X
Publishing.
25........... Primary LL.............. X ..........
Aluminum.
26........... Pulp & Paper II MM.............. X X
(Combustion
sources).
27........... Generic MACT:
Control SS.............. X X
Devices.
Eq. Leaks-- TT.............. X X
Level 1.
Eq. Leaks-- UU.............. X X
Level 2.
Tanks--Level WW.............. X X
2.
28........... General MACT:..
Ethylene Mfg XX & YY......... X X
Carbon Black YY.............. X X
Spandex Prod YY.............. X X
Cyanide YY.............. X X
Chemical
Mfg.
Acetal YY.............. X X
Resins.
Acrylic/ YY.............. X X
Modacrylic
Fibers.
Hydrogen YY.............. X X
Fluoride
Prod.
Polycarbonat YY.............. X X
es Prod.
29........... Steel Pickling. CCC............. X X
30........... Mineral Wool DDD............. X X
Prod.
31........... Hazardous Waste EEE............. X X
Combustion
(Phase I).
32........... Boilers that EEE............. X X
burn Haz.
Waste (Phase
II).
33........... HCL Prod. EEE............. X X
Furnaces
burning Haz.
Waste (P II).
34........... Pharmaceutical GGG............. X X
Prod.
35........... Nat. Gas HHH............. X X
Transmission &
Storage.
36........... Flexible III............. X X
Polyurethane
Foam Prod.
37........... Polymer & JJJ............. X X
Resins 4.
38........... Portland Cement LLL............. X X
39........... Pesticide MMM............. X X
Active
Ingredients.
40........... Wool Fiberglass NNN............. X X
41........... Polymer & OOO............. X X
Resins 3
(Amino &
Phenolic).
42........... Polyether PPP............. X X
Polyols Prod.
43........... Primary Copper. QQQ............. X X
44........... Secondary RRR............. X X
Aluminum Prod.
45........... Primary Lead TTT............. X ..........
Smelting.
46........... Petro UUU............. X X
Refineries
(FCC units).
47........... POTW........... VVV............. X X
48........... Ferroalloys.... XXX............. X X
49........... Municipal AAAA............ X X
Landfills.
50........... Nutritional CCCC............ X X
Yeast.
51........... Plywood and DDDD............ X X
Composite Wood
Prod. (Partial
Vacatur Oct.
07).
52........... Organic Liquids EEEE............ X X
Distribution
(non-gas).
53........... Misc. Organic FFFF............ X X
NESHAP.
54........... Vegetable Oil.. GGGG............ X X
55........... Wet Formed HHHH............ X X
Fiberglass.
56........... Auto & Light IIII............ X X
Duty Truck
(coating).
57........... Paper & Other JJJJ............ X X
Webs.
58........... Metal Can KKKK............ X X
(coating).
59........... Misc. Metal MMMM............ X X
Parts
(coating).
60........... Large NNNN............ X X
Appliances
(coating).
61........... Printing, OOOO............ X X
Coating, &
Dyeing Fabrics.
62........... Plastic Parts & PPPP............ X X
Products
(coating).
63........... Wood Building QQQQ............ X X
Products.
64........... Metal Furniture RRRR............ X X
(coating).
65........... Metal Coil SSSS............ X X
(coating).
66........... Leather Tanning TTTT............ X X
& Finishing.
67........... Cellulose UUUU............ X X
Ethers Prod.
Misc. Viscose
Processes.
68........... Boat VVVV............ X X
Manufacturing.
69........... Reinforced WWWW............ X X
Plastic
Composites.
70........... Rubber Tire Mfg XXXX............ X X
71........... Stationary YYYY............ X X
Combustion
Turbines.
72........... Reciprocating ZZZZ............ X X
Int.
Combustion
Engines.
Area Source X............... .......... ..........
Requirement
s >>..
[[Page 20249]]
73........... Lime AAAAA........... X X
Manufacturing.
74........... Semiconductor BBBBB........... X X
Production.
75........... Coke Ovens: CCCCC........... X X
(Push/Quench/
Battery/
Stacks).
76........... Industrial/ DDDDD........... .......... ..........
Commercial/
Institutional
Boilers &
Process
Heaters,
VACATED on 7/
30/07..
77........... Iron Foundries. EEEEE........... X X
78........... Integrated Iron FFFFF........... X X
& Steel.
79........... Site GGGGG........... X X
Remediation.
80........... Misc. Coating HHHHH........... X X
Manufacturing.
81........... Mercury Cell IIIII........... X X
Chlor-Alkali.
82........... Brick & JJJJJ........... .......... ..........
Structural
Clay Products,
VACATED on 6/
18/07.
83........... Clay Ceramics KKKKK........... .......... ..........
Manufacturing,
VACATED on 6/
18/07.
84........... Asphalt Roofing LLLLL........... X X
& Processing.
85........... Flex. MMMMM........... X X
Polyurethane
Foam
Fabrication.
86........... Hydrochloric NNNNN........... X X
Acid Prod/
Fumed Silica.
87........... Engine & Rocket PPPPP........... X X
Test
Facilities.
88........... Friction QQQQQ........... X X
Materials
Manufacturing.
89........... Taconite Iron RRRRR........... X X
Ore.
90........... Refactories.... SSSSS........... X X
91........... Primary TTTTT........... X X
Magnesium.
------------------------------------------------------------------------
Ares Source Rules
------------------------------------------------------------------------
92........... Hospital WWWWW........... X ..........
Sterilizers.
93........... Electric Arc YYYYY........... X ..........
Furnaces
Stainless and
Nonstainless
Steel Mfg.
94........... Iron & Steel ZZZZZ........... X ..........
foundries.
95........... Gasoline BBBBBB.......... X ..........
Distribution--
Bulk.
96........... Gasoline CCCCCC.......... X ..........
Dispensing
Facilities.
97........... PVC & DDDDDD.......... X ..........
Copolymers
Prod.
98........... Primary Copper. EEEEEE.......... X ..........
99........... Secondary FFFFFF.......... X ..........
Copper
Smelting.
100.......... Primary GGGGGG.......... X ..........
Nonferrous
Metals Paint
Stripping.
101.......... Auto-Body HHHHHH.......... X ..........
Refinishing
Plastic Parts
& Prod.
(coating).
102.......... Acrylic/ LLLLLL.......... X ..........
Modacrylic
Fibers Prod.
103.......... Carbon Black MMMMMM.......... X ..........
Prod.
104.......... Chemical Mfg. NNNNNN.......... X ..........
Chrom Flex.
Polyurethane
Foam Fab.
105.......... Flex. OOOOOO.......... X ..........
Polyurethane
Foam Prod.
106.......... Lead Acid PPPPPP.......... X ..........
Battery Mfg.
107.......... Wood Preserving QQQQQQ.......... X ..........
108.......... Clay Ceramics RRRRRR.......... .......... ..........
Mfg.
109.......... Glass Mfg...... SSSSSS.......... .......... ..........
110.......... Secondary TTTTTT.......... .......... ..........
Nonferrous
Metals.
111.......... Plating and WWWWWW.......... .......... ..........
Polishing.
112.......... Hearing Eq. Mfg XXXXXX.......... .......... ..........
Industrial ................ .......... ..........
Mach. & Eq.
Finishing.
Elect. & ................ .......... ..........
Electronics
Eq. Finishing.
Fabricated ................ .......... ..........
Metal Prod.
Fabricated ................ .......... ..........
Plate Work
(Boiler Shop).
Fabricated ................ .......... ..........
Structural
Metal Mfg.
Iron and Steel ................ .......... ..........
Forging.
Primary Metals ................ .......... ..........
Prod. Mfg.
Valves and Pipe ................ .......... ..........
Fittings Mfg.
Ferroalloys ................ .......... ..........
Production.
113.......... Ferro/Silico YYYYYY.......... .......... ..........
Manganese.
------------------------------------------------------------------------
\1\ State program approved on October 31, 2001. Delegation table last
updated on April 1, 2009.
\2\ Kentucky Department for Environmental Protection.
\3\ Louisville Air Pollution Control District.
(ii) [Reserved]
(19) Louisiana.
(i) The following table lists the specific part 63 standards that
have been delegated unchanged to the Louisiana Department of
Environmental Quality for all sources. The ``X'' symbol is used to
indicate each subpart that has been delegated. The delegations are
subject to all of the conditions and limitations set forth in Federal
law, regulations, policy, guidance, and determinations. Some
authorities cannot be delegated and are retained by EPA. These include
certain General Provisions authorities and specific parts of some
standards. Any amendments made to these rules after the date of
adoption are not delegated.
[[Page 20250]]
Delegation Status for Part 63 Standards--State of Louisiana
------------------------------------------------------------------------
Subpart Source category LDEQ \1\
------------------------------------------------------------------------
A.......................... General Provisions............. X
D.......................... Early Reductions............... NO
F,G,H & I.................. SOCMI HON...................... X
J.......................... Polyvinyl Chloride & Copolymers NO \2\
Production.
L.......................... Coke Oven Batteries............ X
M.......................... Perchloroethylene--Dry Cleaners X
N.......................... Chromium....................... X
O.......................... Ethylene Oxide Sterilization... X
Q.......................... Industrial Process Cooling X
Towers.
R.......................... Gasoline Distribution.......... X
S.......................... Pulp & Paper MACT I............ X
T.......................... Halogenated Solvent............ X
U.......................... Polymers & Resins/Group I...... X
W.......................... Epoxy Resins and Non-Nylon X
Polyamides.
X.......................... Secondary Lead Smelting........ X
Y.......................... Marine Vessel Loading.......... X
AA/BB...................... Phosphoric Acid/Phosphate X
Fertilizers.
CC......................... Petroleum Refineries (MACT I).. X
DD......................... Offsite Waste & Recovery....... X
EE......................... Magnetic Tape Mfg.............. X
GG......................... Aerospace Mfg and Rework....... X
HH......................... Oil & Natural Gas Production... X
II......................... Shipbuilding & Ship Repair..... X
JJ......................... Wood Furniture Manufacturing... X
KK......................... Printing & Publishing.......... X
LL......................... Primary Aluminum Reduction X
Plants.
MM......................... Combustion Sources at Kraft, X
Soda, and Sulfite Pulp & Paper
Mills.
OO......................... Storage Vessels (Tanks)-- X
Control Level 1.
PP......................... Standards for Containers....... X
QQ......................... Standards for Surface X
Impoundments.
RR......................... Standards for Individual Drain X
Systems.
SS......................... Closed Vent Systems, Control X
Devices, Recovery Devices &
Routing to a Fuel Gas System
or a Process.
TT......................... Equipment Leaks--Control Level X
1.
UU......................... Equipment Leaks--Control Level X
2.
VV......................... Standards for Oil-Water X
Separators & Organic-Water
Separators.
WW......................... Storage Vessels (Tanks)-- X
Control Level 2.
XX......................... Ethylene Manufacturing Process X
Units: Heat Exchange Systems &
Waste Operations.
YY......................... Acetal Resins.................. X
YY......................... Acrylic/Modacrylic Fibers...... X
YY......................... Carbon Black Production........ X
YY......................... Cyanide Chemicals Mfg.......... X
YY......................... Ethylene Production............ X
YY......................... Hydrogen Fluoride.............. X
YY......................... Polycarbonates Production...... X
YY......................... Spandex Production............. X
CCC........................ Steel Pickling--HCL Process X
Facilities and Hydrochloric
Acid Regeneration Plants.
DDD........................ Standards for Mineral-Wool X
Production.
EEE........................ Standards for Hazardous Waste X
Combustors.
GGG........................ Standards for Pharmaceuticals X
Production.
HHH........................ Standards for Natural Gas X
Transmission & Storage.
III........................ Flexible Polyurethane Foam X
Production.
JJJ........................ Polymers & Resins/Group IV..... X
LLL........................ Portland Cement Manufacturing.. X
MMM........................ Pesticide Active Ingredient X
Production.
NNN........................ Wool Fiberglass................ X
OOO........................ Polymers & Resins III Amino X
Resins, Phenolic Resins.
PPP........................ Polyether Polyols Production... X
QQQ........................ Primary Copper Smelting........ X
RRR........................ Secondary Aluminum Production.. X
TTT........................ Primary Lead Smelting.......... X
UUU........................ Petroleum Refineries (Catalytic X
Cracking Units, Catalytic
Reforming Units and Sulfur
Recovery Plants).
VVV........................ Publicly Owned Treatment Works X
(POTW).
XXX........................ Ferroalloys Production......... X
ZZZ........................ Plywood/Particle Board NO
Manufacturing.
AAAA....................... Municipal Solid Waste Landfills X
CCCC....................... Nutritional Yeast Manufacturing X
DDDD....................... Plywood & Composite Wood NO
Products.
EEEE....................... Organic Liquids Distribution X
(Non-Gasoline).
FFFF....................... Miscellaneous Organic.......... X
GGGG....................... Solvent Extraction for X
Vegetable Oil Production.
HHHH....................... Wet-Formed Fiberglass Mat X
Production.
IIII....................... Auto & Light Duty Truck X
(Surface Coating).
[[Page 20251]]
JJJJ....................... Paper & Other Webs (Surface X
Coating).
KKKK....................... Metal Can (Surface Coating).... X
MMMM....................... Misc. Metal Parts (Surface X
Coating).
NNNN....................... Large Appliances (Surface X
Coating).
OOOO....................... Fabric Printing, Coating & X
Dyeing (Surface Coating).
PPPP....................... Plastic Parts & Products X
(Surface Coating).
QQQQ....................... Wood Building Products X
(formerly Flat Wood Paneling)
(Surface Coating).
RRRR....................... Metal Furniture (Surface X
Coating).
SSSS....................... Metal Coil (Surface Coating)... X
TTTT....................... Leather-Finishing Operations... X
UUUU....................... Cellulose Products............. X
VVVV....................... Boat Manufacturing............. X
WWWW....................... Reinforced Plastics Composites X
Production.
XXXX....................... Rubber Tire Manufacturing...... X
YYYY....................... Combustion Turbines............ X
ZZZZ....................... Reciprocating Internal X
Combustion Engines (RICE).
AAAAA...................... Lime Manufacturing Plants...... X
BBBBB...................... Semiconductor Manufacturing.... X
CCCCC...................... Coke Oven; Pushing, Quenching, X
and Battery Stacks.
DDDDD...................... Industrial, Commercial and NO \2\
Institutional Boilers &
Process Heaters.
EEEEE...................... Iron & Steel Foundries......... X
FFFFF...................... Integrated Iron & Steel X
Manufacturing Facilities.
GGGGG...................... Site Remediation............... X
HHHHH...................... Miscellaneous Coating X
Manufacturing.
IIIII...................... Mercury Cell Chlor-Alkali NO \2\
Plants.
JJJJJ...................... Brick & Structural Clay NO \2\
Products Manufacturing.
KKKKK...................... Clay Ceramics Manufacturing.... NO \2\
LLLLL...................... Asphalt Roofing and Processing. X
MMMMM...................... Flexible Polyurethane Foam X
Fabrication Operation.
NNNNN...................... Hydrochloric Acid Production... X
PPPPP...................... Engine Test Cells/Stands X
(Combined w/Rocket Testing
Facilities).
QQQQQ...................... Friction Products Manufacturing X
RRRRR...................... Taconite Ore Processing........ X
SSSSS...................... Refractory Products X
Manufacturing.
TTTTT...................... Primary Magnesium Refining..... X
YYYYY...................... Electric Arc Furnace X
Steelmaking Facilities.
BBBBBB..................... Gasoline Distribution Terminals X
CCCCCC..................... Gasoline Dispensing Facilities. X
DDDDDD..................... Polyvinyl Chloride and X
Copolymers Production.
EEEEEE..................... Primary Copper Smelting........ X
FFFFFF..................... Secondary Copper Smelting...... X
GGGGGG..................... Primary Nonferrous Metals Zinc, X
Cadmium, and Beryllium.
HHHHHH..................... Paint Stripping and X
Miscellaneous Surface Coating.
LLLLLL..................... Acrylic/Modacrylic Fibor....... X
MMMMMM..................... Carbon Black Production........ X
NNNNNN..................... Chromium Compounds............. X
PPPPPP..................... Lead Acid Battery Mfg.......... X
QQQQQQ..................... Wood Preserving................ X
RRRRRR..................... Clay Ceramics Mfg.............. X
SSSSSS..................... Glass Manufacturing............ X
TTTTTT..................... Secondary Nonferrous Metals X
Processing (Brass, Bronze,
Magnesium, & Zinc).
UUUUUU--VVVVVV............. (Reserved)..................... ..........
WWWWWW..................... Plating and Polishing X
Operations.
XXXXXX..................... Metal Fabrication & Finishing X
Source Nine Categories.
YYYYYY..................... Ferroalloys Production X
Facilities.
ZZZZZZ..................... (Reserved)..................... ..........
------------------------------------------------------------------------
\1\ Federal Rules Adopted by Louisiana Department of Environmental
Quality (LDEQ), unchanged as of June 16, 2006.
\2\ Although previously delegated to some States, this standard has been
vacated and remanded to EPA by the U.S. Court of Appeals for District
of Columbia Circuit. Therefore, this standard is not delegated at this
time to any States in Region 6.
* * * * *
[FR Doc. 2013-07540 Filed 4-3-13; 8:45 am]
BILLING CODE 6560-50-P