Schedules for Atlantic Shark Identification Workshops and Protected Species Safe Handling, Release, and Identification Workshops, 15709-15710 [2013-05639]
Download as PDF
<![CDATA[
Federal Register / Vol. 78, No. 48 / Tuesday, March 12, 2013 / Notices
Note: The times and sequence specified in
this agenda are subject to change.
Dated: March 7, 2013.
Tracey L. Thompson,
Acting Deputy Director, Office of Sustainable
Fisheries, National Marine Fisheries Service.
[FR Doc. 2013–05602 Filed 3–11–13; 8:45 am]
BILLING CODE 3510–22–P
DEPARTMENT OF COMMERCE
See SUPPLEMENTARY INFORMATION for
further details on workshop locations.
FOR FURTHER INFORMATION CONTACT:
Richard A. Pearson by phone: (727)
824–5399, or by fax: (727) 824–5398.
SUPPLEMENTARY INFORMATION: The
workshop schedules, registration
information, and a list of frequently
asked questions regarding these
workshops are posted on the Internet at:
https://www.nmfs.noaa.gov/sfa/hms/
workshops/.
National Oceanic and Atmospheric
Administration
Atlantic Shark Identification
Workshops
RIN 0648–XC512
Since January 1, 2008, Atlantic shark
dealers have been prohibited from
receiving, purchasing, trading, or
bartering for Atlantic sharks unless a
valid Atlantic Shark Identification
Workshop certificate is on the premises
of each business listed under the shark
dealer permit which first receives
Atlantic sharks (71 FR 58057; October 2,
2006). Dealers who attend and
successfully complete a workshop are
issued a certificate for each place of
business that is permitted to receive
sharks. These certificate(s) are valid for
3 years. Approximately 83 free Atlantic
Shark Identification Workshops have
been conducted since January 2007.
Currently, permitted dealers may send
a proxy to an Atlantic Shark
Identification Workshop. However, if a
dealer opts to send a proxy, the dealer
must designate a proxy for each place of
business covered by the dealer’s permit
which first receives Atlantic sharks.
Only one certificate will be issued to
each proxy. A proxy must be a person
who is currently employed by a place of
business covered by the dealer’s permit;
is a primary participant in the
identification, weighing, and/or first
receipt of fish as they are offloaded from
a vessel; and who fills out dealer
reports. Atlantic shark dealers are
prohibited from renewing a Federal
shark dealer permit unless a valid
Atlantic Shark Identification Workshop
certificate for each business location
which first receives Atlantic sharks has
been submitted with the permit renewal
application. Additionally, trucks or
other conveyances that are extensions of
a dealer’s place of business must
possess a copy of a valid dealer or proxy
Atlantic Shark Identification Workshop
certificate.
Schedules for Atlantic Shark
Identification Workshops and
Protected Species Safe Handling,
Release, and Identification Workshops
National Marine Fisheries
Service (NMFS), National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
ACTION: Notice of public workshops.
AGENCY:
Free Atlantic Shark
Identification Workshops and Protected
Species Safe Handling, Release, and
Identification Workshops will be held in
April, May, and June of 2013. Certain
fishermen and shark dealers are
required to attend a workshop to meet
regulatory requirements and to maintain
valid permits. Specifically, the Atlantic
Shark Identification Workshop is
mandatory for all federally permitted
Atlantic shark dealers. The Protected
Species Safe Handling, Release, and
Identification Workshop is mandatory
for vessel owners and operators who use
bottom longline, pelagic longline, or
gillnet gear, and who have also been
issued shark or swordfish limited access
permits. Additional free workshops will
be conducted during 2013 and will be
announced in a future notice.
DATES: The Atlantic Shark Identification
Workshops will be held April 11, May
9, and June 6, 2013.
The Protected Species Safe Handling,
Release, and Identification Workshops
will be held on April 10, April 12, May
1, May 8, June 5, and June 12, 2013.
See SUPPLEMENTARY INFORMATION for
further details.
ADDRESSES: The Atlantic Shark
Identification Workshops will be held in
Wilmington, NC; Bohemia, NY; and
Panama City, FL.
The Protected Species Safe Handling,
Release, and Identification Workshops
will be held in Port St. Lucie, FL;
Atlantic City, NJ; Ocean City, MD;
Warwick, RI; Kitty Hawk, NC; and
Gulfport, MS.
mstockstill on DSK4VPTVN1PROD with NOTICES
SUMMARY:
VerDate Mar<15>2010
17:21 Mar 11, 2013
Jkt 229001
Workshop Dates, Times, and Locations
1. April 11, 2013, 12 p.m.–4 p.m.,
Hampton Inn, 124 Old Eastwood Road,
Wilmington, NC 28403.
2. May 9, 2013, 12 p.m.–4 p.m.,
LaQuinta Inn & Suites, 10 Aero Road,
Bohemia, NY 11716.
PO 00000
Frm 00030
Fmt 4703
Sfmt 4703
15709
3. June 6, 2013, 12 p.m.–4 p.m.,
LaQuinta Inn & Suites, 7115 Coastal
Palms Boulevard, Panama City, FL
32408.
Registration
To register for a scheduled Atlantic
Shark Identification Workshop, please
contact Eric Sander at
esander@peoplepc.com or at (386) 852–
8588.
Registration Materials
To ensure that workshop certificates
are linked to the correct permits,
participants will need to bring the
following specific items to the
workshop:
• Atlantic shark dealer permit holders
must bring proof that the attendee is an
owner or agent of the business (such as
articles of incorporation), a copy of the
applicable permit, and proof of
identification.
• Atlantic shark dealer proxies must
bring documentation from the permitted
dealer acknowledging that the proxy is
attending the workshop on behalf of the
permitted Atlantic shark dealer for a
specific business location, a copy of the
appropriate valid permit, and proof of
identification.
Workshop Objectives
The Atlantic Shark Identification
Workshops are designed to reduce the
number of unknown and improperly
identified sharks reported in the dealer
reporting form and increase the
accuracy of species-specific dealerreported information. Reducing the
number of unknown and improperly
identified sharks will improve quota
monitoring and the data used in stock
assessments. These workshops will train
shark dealer permit holders or their
proxies to properly identify Atlantic
shark carcasses.
Protected Species Safe Handling,
Release, and Identification Workshops
Since January 1, 2007, shark limitedaccess and swordfish limited-access
permit holders who fish with longline
or gillnet gear have been required to
submit a copy of their Protected Species
Safe Handling, Release, and
Identification Workshop certificate in
order to renew either permit (71 FR
58057; October 2, 2006). These
certificate(s) are valid for 3 years. As
such, vessel owners who have not
already attended a workshop and
received a NMFS certificate, or vessel
owners whose certificate(s) will expire
prior to the next permit renewal, must
attend a workshop to fish with, or
renew, their swordfish and shark
limited-access permits. Additionally,
E:\FR\FM\12MRN1.SGM
12MRN1
15710
Federal Register / Vol. 78, No. 48 / Tuesday, March 12, 2013 / Notices
new shark and swordfish limited-access
permit applicants who intend to fish
with longline or gillnet gear must attend
a Protected Species Safe Handling,
Release, and Identification Workshop
and submit a copy of their workshop
certificate before either of the permits
will be issued. Approximately 148 free
Protected Species Safe Handling,
Release, and Identification Workshops
have been conducted since 2006.
In addition to certifying vessel
owners, at least one operator on board
vessels issued a limited-access
swordfish or shark permit that uses
longline or gillnet gear is required to
attend a Protected Species Safe
Handling, Release, and Identification
Workshop and receive a certificate.
Vessels that have been issued a limitedaccess swordfish or shark permit and
that use longline or gillnet gear may not
fish unless both the vessel owner and
operator have valid workshop
certificates onboard at all times. Vessel
operators who have not already
attended a workshop and received a
NMFS certificate, or vessel operators
whose certificate(s) will expire prior to
their next fishing trip, must attend a
workshop to operate a vessel with
swordfish and shark limited-access
permits that uses longline or gillnet
gear.
Workshop Dates, Times, and Locations
1. April 10, 2013, 9 a.m.–5 p.m.,
Holiday Inn, 10120 Northwest Federal
Highway, Port St. Lucie, FL 34952.
2. April 12, 2013, 9 a.m.–5 p.m.,
Caesar’s Palace, 2100 Pacific Avenue,
Atlantic City, NJ 08401.
3. May 1, 2013, 9 a.m.–5 p.m.,
Princess Royale Oceanside, 9100 Coastal
Highway, Ocean City, MD 21842.
4. May 8, 2013, 9 a.m.–5 p.m., Hilton
Garden Inn, One Thurber Street/
Jefferson Boulevard, Warwick, RI 02886.
5. June 5, 2013, 9 a.m.–5 p.m., Hilton
Garden Inn, 5353 North Virginia Dare
Trail, Kitty Hawk, NC 27949.
6. June 12, 2013, 9 a.m.–5 p.m.,
Holiday Inn, 9515 Highway 49,
Gulfport, MS 39503.
mstockstill on DSK4VPTVN1PROD with NOTICES
Registration
To register for a scheduled Protected
Species Safe Handling, Release, and
Identification Workshop, please contact
Angler Conservation Education at (386)
682–0158.
Registration Materials
To ensure that workshop certificates
are linked to the correct permits,
participants will need to bring the
following specific items with them to
the workshop:
VerDate Mar<15>2010
17:21 Mar 11, 2013
Jkt 229001
• Individual vessel owners must
bring a copy of the appropriate
swordfish and/or shark permit(s), a copy
of the vessel registration or
documentation, and proof of
identification.
• Representatives of a businessowned or co-owned vessel must bring
proof that the individual is an agent of
the business (such as articles of
incorporation), a copy of the applicable
swordfish and/or shark permit(s), and
proof of identification.
• Vessel operators must bring proof of
identification.
Workshop Objectives
The Protected Species Safe Handling,
Release, and Identification Workshops
are designed to teach longline and
gillnet fishermen the required
techniques for the safe handling and
release of entangled and/or hooked
protected species, such as sea turtles,
marine mammals, and smalltooth
sawfish. In an effort to improve
reporting, the proper identification of
protected species will also be taught at
these workshops. Additionally,
individuals attending these workshops
will gain a better understanding of the
requirements for participating in these
fisheries. The overall goal of these
workshops is to provide participants
with the skills needed to reduce the
mortality of protected species, which
may prevent additional regulations on
these fisheries in the future.
Authority: 16 U.S.C. 1801 et seq.
Dated: March 7, 2013.
Kara Meckley,
Acting Deputy Director, Office of Sustainable
Fisheries, National Marine Fisheries Service.
[FR Doc. 2013–05639 Filed 3–11–13; 8:45 am]
BILLING CODE 3510–22–P
CONSUMER PRODUCT SAFETY
COMMISSION
Agency Information Collection
Activities; Announcement of Office of
Management and Budget Approval;
Third Party Testing of Children’s
Products
Consumer Product Safety
Commission.
ACTION: Notice.
AGENCY:
The Consumer Product Safety
Commission (Commission) is
announcing that a collection of
information entitled Third Party Testing
of Children’s Products has been
approved by the Office of Management
and budget (OMB) under the Paperwork
Reduction Act of 1995.
SUMMARY:
PO 00000
Frm 00031
Fmt 4703
Sfmt 4703
FOR FURTHER INFORMATION CONTACT:
Robert H. Squibb, Consumer Product
Safety Commission, 4330 East West
Highway, Bethesda, MD 20814; (301)
504–7815, or by email to:
rsquibb@cpsc.gov.
SUPPLEMENTARY INFORMATION: The
agency previously announced that a
proposed information collection
regarding third party testing of
children’s products had been submitted
to OMB for review and clearance under
44 U.S.C. 3501–3520 in the Federal
Register as follows:
• May 20, 2010, 75 FR 28336, at
28360–61 (proposed rule on Testing and
Labeling Pertaining to Product
Certification (testing rule));
• May 20, 2010, 75 FR 28208, at
28217–18 (proposed rule on Conditions
and Requirements for Testing
Component Parts of Consumer
Products);
• November 8, 2011, 76 FR 69586, at
69592–93 (proposed amendment to the
testing rule on selecting representative
samples for periodic testing).
Final rules for each were published in
the Federal Register on the following
dates, respectively: November 8, 2011
(76 FR 69482, at 69537–40); November
8, 2011 (76 FR 69546, at 69578–80); and
December 5, 2012 (77 FR 72205, at
72217–18).
An agency may not conduct or
sponsor, and a person is not required to
respond to, a collection of information
unless it displays a currently valid OMB
control number. OMB has now
approved the information collection and
has assigned OMB control number
3041–0159. The approval expires on
February 29, 2016. A copy of the
supporting statement for this
information collection is available on
the Internet at https://www.reginfo.gov/
public/do/PRAMain.
Dated: March 7, 2013.
Todd A. Stevenson,
Secretary, Consumer Product Safety
Commission.
[FR Doc. 2013–05575 Filed 3–11–13; 8:45 am]
BILLING CODE 6355–01–P
CONSUMER PRODUCT SAFETY
COMMISSION
Strong Sensitizer Guidance
Consumer Product Safety
Commission.
ACTION: Notice of availability.
AGENCY:
The U.S. Consumer Product
Safety Commission (CPSC or
Commission) is announcing the
availability of a document prepared by
CPSC staff titled, ‘‘Strong Sensitizer
SUMMARY:
E:\FR\FM\12MRN1.SGM
12MRN1
]]>Agencies
[Federal Register Volume 78, Number 48 (Tuesday, March 12, 2013)]
[Notices]
[Pages 15709-15710]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-05639]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric Administration
RIN 0648-XC512
Schedules for Atlantic Shark Identification Workshops and
Protected Species Safe Handling, Release, and Identification Workshops
AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and
Atmospheric Administration (NOAA), Commerce.
ACTION: Notice of public workshops.
-----------------------------------------------------------------------
SUMMARY: Free Atlantic Shark Identification Workshops and Protected
Species Safe Handling, Release, and Identification Workshops will be
held in April, May, and June of 2013. Certain fishermen and shark
dealers are required to attend a workshop to meet regulatory
requirements and to maintain valid permits. Specifically, the Atlantic
Shark Identification Workshop is mandatory for all federally permitted
Atlantic shark dealers. The Protected Species Safe Handling, Release,
and Identification Workshop is mandatory for vessel owners and
operators who use bottom longline, pelagic longline, or gillnet gear,
and who have also been issued shark or swordfish limited access
permits. Additional free workshops will be conducted during 2013 and
will be announced in a future notice.
DATES: The Atlantic Shark Identification Workshops will be held April
11, May 9, and June 6, 2013.
The Protected Species Safe Handling, Release, and Identification
Workshops will be held on April 10, April 12, May 1, May 8, June 5, and
June 12, 2013.
See SUPPLEMENTARY INFORMATION for further details.
ADDRESSES: The Atlantic Shark Identification Workshops will be held in
Wilmington, NC; Bohemia, NY; and Panama City, FL.
The Protected Species Safe Handling, Release, and Identification
Workshops will be held in Port St. Lucie, FL; Atlantic City, NJ; Ocean
City, MD; Warwick, RI; Kitty Hawk, NC; and Gulfport, MS.
See SUPPLEMENTARY INFORMATION for further details on workshop
locations.
FOR FURTHER INFORMATION CONTACT: Richard A. Pearson by phone: (727)
824-5399, or by fax: (727) 824-5398.
SUPPLEMENTARY INFORMATION: The workshop schedules, registration
information, and a list of frequently asked questions regarding these
workshops are posted on the Internet at: https://www.nmfs.noaa.gov/sfa/hms/workshops/.
Atlantic Shark Identification Workshops
Since January 1, 2008, Atlantic shark dealers have been prohibited
from receiving, purchasing, trading, or bartering for Atlantic sharks
unless a valid Atlantic Shark Identification Workshop certificate is on
the premises of each business listed under the shark dealer permit
which first receives Atlantic sharks (71 FR 58057; October 2, 2006).
Dealers who attend and successfully complete a workshop are issued a
certificate for each place of business that is permitted to receive
sharks. These certificate(s) are valid for 3 years. Approximately 83
free Atlantic Shark Identification Workshops have been conducted since
January 2007.
Currently, permitted dealers may send a proxy to an Atlantic Shark
Identification Workshop. However, if a dealer opts to send a proxy, the
dealer must designate a proxy for each place of business covered by the
dealer's permit which first receives Atlantic sharks. Only one
certificate will be issued to each proxy. A proxy must be a person who
is currently employed by a place of business covered by the dealer's
permit; is a primary participant in the identification, weighing, and/
or first receipt of fish as they are offloaded from a vessel; and who
fills out dealer reports. Atlantic shark dealers are prohibited from
renewing a Federal shark dealer permit unless a valid Atlantic Shark
Identification Workshop certificate for each business location which
first receives Atlantic sharks has been submitted with the permit
renewal application. Additionally, trucks or other conveyances that are
extensions of a dealer's place of business must possess a copy of a
valid dealer or proxy Atlantic Shark Identification Workshop
certificate.
Workshop Dates, Times, and Locations
1. April 11, 2013, 12 p.m.-4 p.m., Hampton Inn, 124 Old Eastwood
Road, Wilmington, NC 28403.
2. May 9, 2013, 12 p.m.-4 p.m., LaQuinta Inn & Suites, 10 Aero
Road, Bohemia, NY 11716.
3. June 6, 2013, 12 p.m.-4 p.m., LaQuinta Inn & Suites, 7115
Coastal Palms Boulevard, Panama City, FL 32408.
Registration
To register for a scheduled Atlantic Shark Identification Workshop,
please contact Eric Sander at esander@peoplepc.com or at (386) 852-
8588.
Registration Materials
To ensure that workshop certificates are linked to the correct
permits, participants will need to bring the following specific items
to the workshop:
Atlantic shark dealer permit holders must bring proof that
the attendee is an owner or agent of the business (such as articles of
incorporation), a copy of the applicable permit, and proof of
identification.
Atlantic shark dealer proxies must bring documentation
from the permitted dealer acknowledging that the proxy is attending the
workshop on behalf of the permitted Atlantic shark dealer for a
specific business location, a copy of the appropriate valid permit, and
proof of identification.
Workshop Objectives
The Atlantic Shark Identification Workshops are designed to reduce
the number of unknown and improperly identified sharks reported in the
dealer reporting form and increase the accuracy of species-specific
dealer-reported information. Reducing the number of unknown and
improperly identified sharks will improve quota monitoring and the data
used in stock assessments. These workshops will train shark dealer
permit holders or their proxies to properly identify Atlantic shark
carcasses.
Protected Species Safe Handling, Release, and Identification Workshops
Since January 1, 2007, shark limited-access and swordfish limited-
access permit holders who fish with longline or gillnet gear have been
required to submit a copy of their Protected Species Safe Handling,
Release, and Identification Workshop certificate in order to renew
either permit (71 FR 58057; October 2, 2006). These certificate(s) are
valid for 3 years. As such, vessel owners who have not already attended
a workshop and received a NMFS certificate, or vessel owners whose
certificate(s) will expire prior to the next permit renewal, must
attend a workshop to fish with, or renew, their swordfish and shark
limited-access permits. Additionally,
[[Page 15710]]
new shark and swordfish limited-access permit applicants who intend to
fish with longline or gillnet gear must attend a Protected Species Safe
Handling, Release, and Identification Workshop and submit a copy of
their workshop certificate before either of the permits will be issued.
Approximately 148 free Protected Species Safe Handling, Release, and
Identification Workshops have been conducted since 2006.
In addition to certifying vessel owners, at least one operator on
board vessels issued a limited-access swordfish or shark permit that
uses longline or gillnet gear is required to attend a Protected Species
Safe Handling, Release, and Identification Workshop and receive a
certificate. Vessels that have been issued a limited-access swordfish
or shark permit and that use longline or gillnet gear may not fish
unless both the vessel owner and operator have valid workshop
certificates onboard at all times. Vessel operators who have not
already attended a workshop and received a NMFS certificate, or vessel
operators whose certificate(s) will expire prior to their next fishing
trip, must attend a workshop to operate a vessel with swordfish and
shark limited-access permits that uses longline or gillnet gear.
Workshop Dates, Times, and Locations
1. April 10, 2013, 9 a.m.-5 p.m., Holiday Inn, 10120 Northwest
Federal Highway, Port St. Lucie, FL 34952.
2. April 12, 2013, 9 a.m.-5 p.m., Caesar's Palace, 2100 Pacific
Avenue, Atlantic City, NJ 08401.
3. May 1, 2013, 9 a.m.-5 p.m., Princess Royale Oceanside, 9100
Coastal Highway, Ocean City, MD 21842.
4. May 8, 2013, 9 a.m.-5 p.m., Hilton Garden Inn, One Thurber
Street/Jefferson Boulevard, Warwick, RI 02886.
5. June 5, 2013, 9 a.m.-5 p.m., Hilton Garden Inn, 5353 North
Virginia Dare Trail, Kitty Hawk, NC 27949.
6. June 12, 2013, 9 a.m.-5 p.m., Holiday Inn, 9515 Highway 49,
Gulfport, MS 39503.
Registration
To register for a scheduled Protected Species Safe Handling,
Release, and Identification Workshop, please contact Angler
Conservation Education at (386) 682-0158.
Registration Materials
To ensure that workshop certificates are linked to the correct
permits, participants will need to bring the following specific items
with them to the workshop:
Individual vessel owners must bring a copy of the
appropriate swordfish and/or shark permit(s), a copy of the vessel
registration or documentation, and proof of identification.
Representatives of a business-owned or co-owned vessel
must bring proof that the individual is an agent of the business (such
as articles of incorporation), a copy of the applicable swordfish and/
or shark permit(s), and proof of identification.
Vessel operators must bring proof of identification.
Workshop Objectives
The Protected Species Safe Handling, Release, and Identification
Workshops are designed to teach longline and gillnet fishermen the
required techniques for the safe handling and release of entangled and/
or hooked protected species, such as sea turtles, marine mammals, and
smalltooth sawfish. In an effort to improve reporting, the proper
identification of protected species will also be taught at these
workshops. Additionally, individuals attending these workshops will
gain a better understanding of the requirements for participating in
these fisheries. The overall goal of these workshops is to provide
participants with the skills needed to reduce the mortality of
protected species, which may prevent additional regulations on these
fisheries in the future.
Authority: 16 U.S.C. 1801 et seq.
Dated: March 7, 2013.
Kara Meckley,
Acting Deputy Director, Office of Sustainable Fisheries, National
Marine Fisheries Service.
[FR Doc. 2013-05639 Filed 3-11-13; 8:45 am]
BILLING CODE 3510-22-P
