Review of Gun Safety Technologies, 11902 [2013-03884]

Download as PDF 11902 Federal Register / Vol. 78, No. 34 / Wednesday, February 20, 2013 / Notices 201), and part 207, subparts A, D, E, and F (19 CFR part 207). DATES: Effective Date: February 4, 2013. Nathanael Comly (202–205–3174), Office of Investigations, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its Internet server (http:// www.usitc.gov). The public record for these reviews may be viewed on the Commission’s electronic docket (EDIS) at http://edis.usitc.gov. On February 4, 2013, the Commission determined that it should proceed to full reviews in the subject five-year reviews pursuant to section 751(c)(5) of the Act. The Commission found that the domestic interested party group response to its notice of institution (77 FR 66078, November 1, 2012) was adequate and that the respondent interested party group responses with respect to Taiwan and Thailand were adequate, and decided to conduct full reviews of the antidumping duty orders on hot-rolled steel products from Taiwan and Thailand and countervailing duty order on hot-rolled steel products from Thailand. The Commission found that the respondent interested party group response with respect to China, India, Indonesia, and Ukraine was inadequate. However, the Commission determined to conduct full reviews concerning the orders on hotrolled steel products from China, India, Indonesia, and Ukraine to promote administrative efficiency in light of its decision to conduct full reviews with respect to the orders on subject imports from Taiwan and Thailand. A record of the Commissioners’ votes, the Commission’s statement on adequacy, and any individual Commissioner’s statements will be available from the Office of the Secretary and at the Commission’s Web site. Authority: These reviews are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to section 207.62 of the Commission’s rules. srobinson on DSK4SPTVN1PROD with NOTICES 16:13 Feb 19, 2013 BILLING CODE 7020–02–P Mine Safety and Health Administration RIN 1219–AB73 Pattern of Violations Mine Safety and Health Administration, Labor. AGENCY: DEPARTMENT OF JUSTICE Notice of OMB approval of information collection requirements. ACTION: Office of Justice Programs [OJP (NIJ) Docket No. 1615] National Institute of Justice, JPO, DOJ. AGENCY: ACTION: The Paperwork Reduction Act (PRA) requires this notice to set forth the effectiveness of information collection requirements contained in the final rule on Pattern of Violations. SUMMARY: Review of Gun Safety Technologies Notice. The Office of Management and Budget (OMB) authorization for this information collection expires on February 29, 2016. DATES: Following the President’s Plan to reduce gun violence released on January 16, 2013, the U.S. Department of Justice, Office of Justice Programs, National Institute of Justice (NIJ) is conducting a review of existing and emerging gun safety technologies and plans to issue a report on the availability and use of those technologies. NIJ seeks input from all interested stakeholders to help inform its technology assessment and market research of existing and emerging gun safety technologies that would be of interest to the law enforcement and criminal justice communities and others with an interest in gun safety. Representative stakeholders include, but are not limited to, law enforcement, gun safety subject matter experts, firearms manufacturers, firearms experts, manufacturing engineers, biometrics specialists, radio frequency identification (RFID) engineers, microelectronics experts, or others with relevant training and experience. Those individuals wishing to provide relevant comments or information are directed to the following Web site: https:// www.justnet.org/gun_safety_technology/ . Relevant comments or information may also be emailed to the following address: gunsafetytechnology@usdoj.gov. SUMMARY: Relevant comments or information must be received by 5 p.m. Eastern Time on April 8, 2013. DATES: FOR FURTHER INFORMATION CONTACT: National Institute of Justice, by telephone at (202) 307–2942 [Note: This is not a toll-free telephone number]. FOR FURTHER INFORMATION CONTACT: George F. Triebsch, Director, Office of Standards, Regulations, and Variances, MSHA, 1100 Wilson Boulevard, Room 2350, Arlington, Virginia 22209–3939, triebsch.george@dol.gov (email), 202– 693–9440 (voice), or 202–693–9441 (facsimile). On February 8, 2013, the Office of Management and Budget (OMB) approved, under Control Number 1219– 0150, the Department of Labor’s information collection request under the PRA for provisions associated with 30 CFR 104.2(a) for the final rule published in the Federal Register on January 23, 2013 (78 FR 5055). The final rule revised the Agency’s existing regulation for pattern of violations. The effective date of the final rule is March 25, 2013. Under the PRA, an agency may not conduct an information collection unless it has a currently valid OMB approval. OMB had not provided a PRArequired approval for the revised information collection provisions associated with 30 CFR 104.2(a) at the time the final rule was published (44 U.S.C. 3507(a)(2)). Therefore, in accordance with the PRA, the effective date of the information collection provisions associated with the revised rule was delayed until OMB approved the collection (44 U.S.C. 3506(c)(1)(B)(iii)(V)) on February 8, 2013. This OMB authorization expires on February 29, 2016. SUPPLEMENTARY INFORMATION: Jkt 229001 Gregory K. Ridgeway, Acting Director, National Institute of Justice. Dated: February 13, 2013. George F. Triebsch, Certifying Officer. [FR Doc. 2013–03884 Filed 2–19–13; 8:45 am] [FR Doc. 2013–03797 Filed 2–19–13; 8:45 am] BILLING CODE 4410–18–P Issued: February 13, 2013. VerDate Mar<15>2010 DEPARTMENT OF LABOR [FR Doc. 2013–03798 Filed 2–19–13; 8:45 am] FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: By order of the Commission. Lisa R. Barton, Acting Secretary to the Commission. BILLING CODE 4510–43–P PO 00000 Frm 00089 Fmt 4703 Sfmt 9990 E:\FR\FM\20FEN1.SGM 20FEN1

Agencies

[Federal Register Volume 78, Number 34 (Wednesday, February 20, 2013)]
[Notices]
[Page 11902]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-03884]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF JUSTICE

Office of Justice Programs

[OJP (NIJ) Docket No. 1615]


Review of Gun Safety Technologies

AGENCY: National Institute of Justice, JPO, DOJ.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Following the President's Plan to reduce gun violence released 
on January 16, 2013, the U.S. Department of Justice, Office of Justice 
Programs, National Institute of Justice (NIJ) is conducting a review of 
existing and emerging gun safety technologies and plans to issue a 
report on the availability and use of those technologies. NIJ seeks 
input from all interested stakeholders to help inform its technology 
assessment and market research of existing and emerging gun safety 
technologies that would be of interest to the law enforcement and 
criminal justice communities and others with an interest in gun safety. 
Representative stakeholders include, but are not limited to, law 
enforcement, gun safety subject matter experts, firearms manufacturers, 
firearms experts, manufacturing engineers, biometrics specialists, 
radio frequency identification (RFID) engineers, microelectronics 
experts, or others with relevant training and experience. Those 
individuals wishing to provide relevant comments or information are 
directed to the following Web site: https://www.justnet.org/gun_safety_technology/. Relevant comments or information may also be 
emailed to the following address: gunsafetytechnology@usdoj.gov.

DATES: Relevant comments or information must be received by 5 p.m. 
Eastern Time on April 8, 2013.

FOR FURTHER INFORMATION CONTACT: National Institute of Justice, by 
telephone at (202) 307-2942 [Note: This is not a toll-free telephone 
number].

Gregory K. Ridgeway,
Acting Director, National Institute of Justice.
[FR Doc. 2013-03884 Filed 2-19-13; 8:45 am]
BILLING CODE 4410-18-P