Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines, 2197-2198 [2013-00128]
Download as PDF
Federal Register / Vol. 78, No. 7 / Thursday, January 10, 2013 / Rules and Regulations
Issued in Burlington, Massachusetts, on
December 27, 2012.
Colleen M. D’Alessandro,
Assistant Manager, Engine & Propeller
Directorate, Aircraft Certification Service.
Mahlow, Germany; phone: 49 0 33–
7086–1883; fax: 49 0 33–7086–3276.
You may view this service information
at the FAA, Engine & Propeller
Directorate, 12 New England Executive
Park, Burlington, MA 01803. For
information on the availability of this
material at the FAA, call 781–238–7125.
[FR Doc. 2012–31588 Filed 1–9–13; 8:45 am]
BILLING CODE 4910–13–P
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA–2012–1350; Directorate
Identifier 2012–NE–40–AD; Amendment 39–
17313; AD 2012–27–01]
RIN 2120–AA64
Airworthiness Directives; Rolls-Royce
Deutschland Ltd & Co KG Turbofan
Engines
Federal Aviation
Administration (FAA), DOT.
ACTION: Final rule; request for
comments.
AGENCY:
We are adopting a new
airworthiness directive (AD) for certain
Rolls-Royce Deutschland Ltd & Co KG
(RRD) Model Tay 620–15 turbofan
engines. This AD requires a one-time
inspection of the low-pressure
compressor (LPC) fan blades and if
erosion is found their replacement
before further flight. This AD was
prompted by evidence of excessive
leading edge erosion of the LPC fan
blades on certain Tay 620–15 engines.
We are issuing this AD to prevent
failure of the LPC fan blade, which
could result in uncontained engine
failure and damage to the airplane.
DATES: This AD becomes effective
January 25, 2013.
We must receive comments on this
AD by February 25, 2013.
ADDRESSES: You may send comments by
any of the following methods:
• Federal eRulemaking Portal: Go to
https://www.regulations.gov and follow
the instructions for sending your
comments electronically.
• Mail: U.S. Department of
Transportation, 1200 New Jersey
Avenue SE., West Building Ground
Floor, Room W12–140, Washington, DC
20590–0001.
• Hand Delivery: Deliver to Mail
address above between 9 a.m. and 5
p.m., Monday through Friday, except
Federal holidays.
• Fax: 202–493–2251.
For service information identified in
this AD, contact Rolls-Royce
Deutschland Ltd & Co KG, Eschenweg
11, Dahlewitz, 15827 Blankenfelde-
wreier-aviles on DSK5TPTVN1PROD with
SUMMARY:
VerDate Mar<15>2010
12:02 Jan 09, 2013
Jkt 229001
2197
A1777, dated October 26, 2012. The
actions described in this service
information are intended to correct the
unsafe condition identified in the
MCAI.
Examining the AD Docket
You may examine the AD docket on
the Internet at https://
www.regulations.gov; or in person at the
Docket Operations office between 9 a.m.
and 5 p.m., Monday through Friday,
except Federal holidays. The AD docket
contains this AD, the regulatory
evaluation, any comments received, and
other information. The street address for
the Docket Operations office (phone:
800–647–5527) is the same as the Mail
address provided in the ADDRESSES
section. Comments will be available in
the AD docket shortly after receipt.
FOR FURTHER INFORMATION CONTACT:
Frederick Zink, Aerospace Engineer,
Engine Certification Office, FAA, Engine
& Propeller Directorate, 12 New England
Executive Park, Burlington, MA 01803;
phone: 781–238–7779; fax: 781–238–
7199; email: frederick.zink@faa.gov.
SUPPLEMENTARY INFORMATION:
This product has been approved by
Germany and is approved for operation
in the United States. Pursuant to our
bilateral agreement with the European
Community, EASA has notified us of
the unsafe condition described in the
MCAI and service information
referenced above. We are issuing this
AD because we evaluated all
information provided by EASA and
determined the unsafe condition exists
and is likely to exist or develop on other
products of the same type design. This
AD requires a one-time inspection of the
LPC fan blades and if erosion is found
their replacement before further flight.
Discussion
The European Aviation Safety Agency
(EASA), which is the Technical Agent
for the Member States of the European
Community, has issued EASA
Emergency Airworthiness Directive
2012–0234, dated November 6, 2012
(referred to after this as ‘‘the MCAI’’), to
correct an unsafe condition for the
specified products. The MCAI states:
The Low Pressure Compressor (LPC) (fan)
blades of certain Tay 620/15/20 and Tay 620–
15 engines show evidence of excessive
leading edge erosion. Excessive material
removal during the maintenance reduces the
LPC (fan) blade chordal width and
potentially changes the balance of the fan
blade. Reduced chordal width can affect LPC
(fan) blade performance and in combination
with other circumstances could lead to a fan
blade root failure and fan blade separation.
This condition, if not detected and corrected,
could lead to the LPC (fan) blade failure,
potentially causing release of high-energy
debris, possibly resulting in damage to the
aeroplane and/or injury to the occupants.
We are issuing this AD to prevent
failure of the LPC fan blade, which
could result in uncontained engine
failure and damage to the airplane. You
may obtain further information by
examining the MCAI in the AD docket.
Relevant Service Information
RRD has issued Alert NonModification Service Bulletin TAY–72–
PO 00000
Frm 00003
Fmt 4700
Sfmt 4700
FAA’s Determination and Requirements
of This AD
FAA’s Determination of the Effective
Date
No domestic operators use this
product. Therefore, we find that notice
and opportunity for prior public
comment are unnecessary and that good
cause exists for making this amendment
effective in less than 30 days.
Comments Invited
This AD is a final rule that involves
requirements affecting flight safety, and
we did not precede it by notice and
opportunity for public comment. We
invite you to send any written relevant
data, views, or arguments about this AD.
Send your comments to an address
listed under the ADDRESSES section.
Include ‘‘Docket No. FAA–2012–1350;
Directorate Identifier 2012–NE–40–AD’’
at the beginning of your comments. We
specifically invite comments on the
overall regulatory, economic,
environmental, and energy aspects of
this AD. We will consider all comments
received by the closing date and may
amend this AD because of those
comments.
We will post all comments we
receive, without change, to https://
www.regulations.gov, including any
personal information you provide. We
will also post a report summarizing each
substantive verbal contact with FAA
personnel concerning this AD. Using the
search function of the Web site, anyone
can find and read the comments in any
of our dockets, including, if provided,
the name of the individual who sent the
comment (or signed the comment on
behalf of an association, business, labor
union, etc.). You may review the DOT’s
complete Privacy Act Statement in the
E:\FR\FM\10JAR1.SGM
10JAR1
2198
Federal Register / Vol. 78, No. 7 / Thursday, January 10, 2013 / Rules and Regulations
Authority: 49 U.S.C. 106(g), 40113, 44701.
Federal Register published on April 11,
2000 (65 FR 19477–78).
Authority for This Rulemaking
Title 49 of the United States Code
specifies the FAA’s authority to issue
rules on aviation safety. Subtitle I,
section 106, describes the authority of
the FAA Administrator. ‘‘Subtitle VII:
Aviation Programs,’’ describes in more
detail the scope of the Agency’s
authority.
We are issuing this rulemaking under
the authority described in ‘‘Subtitle VII,
Part A, Subpart III, Section 44701:
General requirements.’’ Under that
section, Congress charges the FAA with
promoting safe flight of civil aircraft in
air commerce by prescribing regulations
for practices, methods, and procedures
the Administrator finds necessary for
safety in air commerce. This regulation
is within the scope of that authority
because it addresses an unsafe condition
that is likely to exist or develop on
products identified in this rulemaking
action.
Regulatory Findings
We determined that this AD will not
have federalism implications under
Executive Order 13132. This AD will
not have a substantial direct effect on
the States, on the relationship between
the national government and the States,
or on the distribution of power and
responsibilities among the various
levels of government.
For the reasons discussed above, I
certify this AD:
1. Is not a ‘‘significant regulatory
action’’ under Executive Order 12866;
2. Is not a ‘‘significant rule’’ under the
DOT Regulatory Policies and Procedures
(44 FR 11034, February 26, 1979); and
3. Will not have a significant
economic impact, positive or negative,
on a substantial number of small entities
under the criteria of the Regulatory
Flexibility Act.
We prepared a regulatory evaluation
of the estimated costs to comply with
this AD and placed it in the AD docket.
wreier-aviles on DSK5TPTVN1PROD with
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation
safety, Incorporation by reference,
Safety.
Adoption of the Amendment
Accordingly, under the authority
delegated to me by the Administrator,
the FAA amends 14 CFR part 39 as
follows:
PART 39—AIRWORTHINESS
DIRECTIVES
1. The authority citation for part 39
continues to read as follows:
■
VerDate Mar<15>2010
12:02 Jan 09, 2013
Jkt 229001
§ 39.13
[Amended]
2. The FAA amends § 39.13 by adding
the following new AD:
■
2012–27–01 Rolls-Royce Deutschland Ltd &
Co KG (Formerly Rolls-Royce plc,
Derby, England): Amendment 39–17313;
Docket No. FAA–2012–1350; Directorate
Identifier 2012–NE–40–AD.
(a) Effective Date
This airworthiness directive (AD) becomes
effective January 25, 2013.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Rolls-Royce
Deutschland Ltd & Co KG (RRD) Tay 620–15
turbofan engines, serial numbers 17085,
17088, 17166, 17072, 17073, 17078, and
17079.
(d) Reason
This AD was prompted by evidence of
excessive leading edge erosion of the lowpressure compressor (LPC) fan blades on
certain Tay 620–15 engines. We are issuing
this AD to prevent failure of the LPC fan
blade, which could result in uncontained
engine failure and damage to the airplane.
(e) Actions and Compliance
Unless already done, do the following.
(1) Before the next flight after the effective
date of the AD, inspect the leading edge of
the LPC fan blades and determine if
excessive erosion is evident. Guidance on
conducting the inspection can be found in
RRD Alert Non-Modification Service Bulletin
(NMSB) TAY–72–A1777, dated October 26,
2012.
(2) If the measured blade chordal width is
outside the requirements, before the next
flight, replace the complete set of LPC fan
blades with a set of LPC fan blades eligible
for installation.
(3) Within 30 days after performing the
inspection required by paragraph (e)(1) of
this AD, provide, for all repaired blades, the
actual chordal width measurement to RRD,
Service Engineering.
(f) Paperwork Reduction Act Burden
Statement
For any reporting requirement in this AD,
a federal agency may not conduct or sponsor,
and a person is not required to respond to,
nor shall a person be subject to a penalty for
failure to comply with a collection of
information subject to the requirements of
the Paperwork Reduction Act unless that
collection of information displays a current
valid OMB Control Number. The OMB
Control Number for this information
collection is 2120–0056. Public reporting for
this collection of information is estimated to
be approximately 5 minutes per response,
including the time for reviewing instructions,
completing and reviewing the collection of
information. All responses to this collection
of information are mandatory. Comments
concerning the accuracy of this burden and
suggestions for reducing the burden should
PO 00000
Frm 00004
Fmt 4700
Sfmt 4700
be directed to the FAA at: 800 Independence
Ave. SW., Washington, DC 20591, Attn:
Information Collection Clearance Officer,
AES–200.
(g) Alternative Methods of Compliance
(AMOCs)
The Manager, Engine Certification Office,
may approve AMOCs for this AD. Use the
procedures found in 14 CFR 39.19 to make
your request.
(h) Related Information
(1) For more information about this AD,
contact Frederick Zink, Aerospace Engineer,
Engine Certification Office, FAA, Engine &
Propeller Directorate, 12 New England
Executive Park, Burlington, MA 01803;
phone: 781–238–7779; fax: 781–238–7199;
email: frederick.zink@faa.gov.
(2) Refer to European Aviation Safety
Agency Emergency AD 2012–0234, dated
November 6, 2012, and RRD Alert NMSB
TAY–72–A1777.
(3) For service information identified in
this AD, contact Rolls-Royce Deutschland Ltd
& Co KG, Eschenweg 11, Dahlewitz, 15827
Blankenfelde-Mahlow, Germany; phone: 49 0
33–7086–1883; fax: 49 0 33–7086–3276. You
may view this service information at FAA,
Engine & Propeller Directorate, 12 New
England Executive Park, Burlington, MA. For
information on the availability of this
material at the FAA, call 781–238–7125.
(i) Material Incorporated by Reference
None.
Issued in Burlington, Massachusetts, on
December 27, 2012.
Colleen M. D’Alessandro,
Assistant Manager, Engine & Propeller
Directorate, Aircraft Certification Service.
[FR Doc. 2013–00128 Filed 1–9–13; 8:45 am]
BILLING CODE 4910–13–P
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA–2012–0901; Directorate
Identifier 2012–NE–19–AD; Amendment 39–
17314; AD 2012–27–02]
RIN 2120–AA64
Airworthiness Directives; Turbomeca
S.A. Turboshaft Engines
Federal Aviation
Administration (FAA), DOT.
ACTION: Final rule.
AGENCY:
We are adopting a new
airworthiness directive (AD) for all
Turbomeca S.A. Arriel 1A1, 1A2, 1B,
1C, 1C1, 1C2, 1D, 1D1, 1E2, 1K1, 1S,
and 1S1 turboshaft engines. This AD
requires performing a high gas generator
speed (NG) rating vibration check. This
AD was prompted by several reports of
uncommanded in-flight shutdown on
SUMMARY:
E:\FR\FM\10JAR1.SGM
10JAR1
Agencies
[Federal Register Volume 78, Number 7 (Thursday, January 10, 2013)]
[Rules and Regulations]
[Pages 2197-2198]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-00128]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2012-1350; Directorate Identifier 2012-NE-40-AD;
Amendment 39-17313; AD 2012-27-01]
RIN 2120-AA64
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG
Turbofan Engines
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule; request for comments.
-----------------------------------------------------------------------
SUMMARY: We are adopting a new airworthiness directive (AD) for certain
Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Tay 620-15 turbofan
engines. This AD requires a one-time inspection of the low-pressure
compressor (LPC) fan blades and if erosion is found their replacement
before further flight. This AD was prompted by evidence of excessive
leading edge erosion of the LPC fan blades on certain Tay 620-15
engines. We are issuing this AD to prevent failure of the LPC fan
blade, which could result in uncontained engine failure and damage to
the airplane.
DATES: This AD becomes effective January 25, 2013.
We must receive comments on this AD by February 25, 2013.
ADDRESSES: You may send comments by any of the following methods:
Federal eRulemaking Portal: Go to https://www.regulations.gov and follow the instructions for sending your
comments electronically.
Mail: U.S. Department of Transportation, 1200 New Jersey
Avenue SE., West Building Ground Floor, Room W12-140, Washington, DC
20590-0001.
Hand Delivery: Deliver to Mail address above between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
Fax: 202-493-2251.
For service information identified in this AD, contact Rolls-Royce
Deutschland Ltd & Co KG, Eschenweg 11, Dahlewitz, 15827 Blankenfelde-
Mahlow, Germany; phone: 49 0 33-7086-1883; fax: 49 0 33-7086-3276. You
may view this service information at the FAA, Engine & Propeller
Directorate, 12 New England Executive Park, Burlington, MA 01803. For
information on the availability of this material at the FAA, call 781-
238-7125.
Examining the AD Docket
You may examine the AD docket on the Internet at https://www.regulations.gov; or in person at the Docket Operations office
between 9 a.m. and 5 p.m., Monday through Friday, except Federal
holidays. The AD docket contains this AD, the regulatory evaluation,
any comments received, and other information. The street address for
the Docket Operations office (phone: 800-647-5527) is the same as the
Mail address provided in the ADDRESSES section. Comments will be
available in the AD docket shortly after receipt.
FOR FURTHER INFORMATION CONTACT: Frederick Zink, Aerospace Engineer,
Engine Certification Office, FAA, Engine & Propeller Directorate, 12
New England Executive Park, Burlington, MA 01803; phone: 781-238-7779;
fax: 781-238-7199; email: frederick.zink@faa.gov.
SUPPLEMENTARY INFORMATION:
Discussion
The European Aviation Safety Agency (EASA), which is the Technical
Agent for the Member States of the European Community, has issued EASA
Emergency Airworthiness Directive 2012-0234, dated November 6, 2012
(referred to after this as ``the MCAI''), to correct an unsafe
condition for the specified products. The MCAI states:
The Low Pressure Compressor (LPC) (fan) blades of certain Tay 620/
15/20 and Tay 620-15 engines show evidence of excessive leading edge
erosion. Excessive material removal during the maintenance reduces
the LPC (fan) blade chordal width and potentially changes the
balance of the fan blade. Reduced chordal width can affect LPC (fan)
blade performance and in combination with other circumstances could
lead to a fan blade root failure and fan blade separation.
This condition, if not detected and corrected, could lead to the LPC
(fan) blade failure, potentially causing release of high-energy
debris, possibly resulting in damage to the aeroplane and/or injury
to the occupants.
We are issuing this AD to prevent failure of the LPC fan blade, which
could result in uncontained engine failure and damage to the airplane.
You may obtain further information by examining the MCAI in the AD
docket.
Relevant Service Information
RRD has issued Alert Non-Modification Service Bulletin TAY-72-
A1777, dated October 26, 2012. The actions described in this service
information are intended to correct the unsafe condition identified in
the MCAI.
FAA's Determination and Requirements of This AD
This product has been approved by Germany and is approved for
operation in the United States. Pursuant to our bilateral agreement
with the European Community, EASA has notified us of the unsafe
condition described in the MCAI and service information referenced
above. We are issuing this AD because we evaluated all information
provided by EASA and determined the unsafe condition exists and is
likely to exist or develop on other products of the same type design.
This AD requires a one-time inspection of the LPC fan blades and if
erosion is found their replacement before further flight.
FAA's Determination of the Effective Date
No domestic operators use this product. Therefore, we find that
notice and opportunity for prior public comment are unnecessary and
that good cause exists for making this amendment effective in less than
30 days.
Comments Invited
This AD is a final rule that involves requirements affecting flight
safety, and we did not precede it by notice and opportunity for public
comment. We invite you to send any written relevant data, views, or
arguments about this AD. Send your comments to an address listed under
the ADDRESSES section. Include ``Docket No. FAA-2012-1350; Directorate
Identifier 2012-NE-40-AD'' at the beginning of your comments. We
specifically invite comments on the overall regulatory, economic,
environmental, and energy aspects of this AD. We will consider all
comments received by the closing date and may amend this AD because of
those comments.
We will post all comments we receive, without change, to https://www.regulations.gov, including any personal information you provide. We
will also post a report summarizing each substantive verbal contact
with FAA personnel concerning this AD. Using the search function of the
Web site, anyone can find and read the comments in any of our dockets,
including, if provided, the name of the individual who sent the comment
(or signed the comment on behalf of an association, business, labor
union, etc.). You may review the DOT's complete Privacy Act Statement
in the
[[Page 2198]]
Federal Register published on April 11, 2000 (65 FR 19477-78).
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. ``Subtitle VII: Aviation
Programs,'' describes in more detail the scope of the Agency's
authority.
We are issuing this rulemaking under the authority described in
``Subtitle VII, Part A, Subpart III, Section 44701: General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
Regulatory Findings
We determined that this AD will not have federalism implications
under Executive Order 13132. This AD will not have a substantial direct
effect on the States, on the relationship between the national
government and the States, or on the distribution of power and
responsibilities among the various levels of government.
For the reasons discussed above, I certify this AD:
1. Is not a ``significant regulatory action'' under Executive Order
12866;
2. Is not a ``significant rule'' under the DOT Regulatory Policies
and Procedures (44 FR 11034, February 26, 1979); and
3. Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
We prepared a regulatory evaluation of the estimated costs to
comply with this AD and placed it in the AD docket.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new AD:
2012-27-01 Rolls-Royce Deutschland Ltd & Co KG (Formerly Rolls-Royce
plc, Derby, England): Amendment 39-17313; Docket No. FAA-2012-1350;
Directorate Identifier 2012-NE-40-AD.
(a) Effective Date
This airworthiness directive (AD) becomes effective January 25,
2013.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Rolls-Royce Deutschland Ltd & Co KG (RRD) Tay
620-15 turbofan engines, serial numbers 17085, 17088, 17166, 17072,
17073, 17078, and 17079.
(d) Reason
This AD was prompted by evidence of excessive leading edge
erosion of the low-pressure compressor (LPC) fan blades on certain
Tay 620-15 engines. We are issuing this AD to prevent failure of the
LPC fan blade, which could result in uncontained engine failure and
damage to the airplane.
(e) Actions and Compliance
Unless already done, do the following.
(1) Before the next flight after the effective date of the AD,
inspect the leading edge of the LPC fan blades and determine if
excessive erosion is evident. Guidance on conducting the inspection
can be found in RRD Alert Non-Modification Service Bulletin (NMSB)
TAY-72-A1777, dated October 26, 2012.
(2) If the measured blade chordal width is outside the
requirements, before the next flight, replace the complete set of
LPC fan blades with a set of LPC fan blades eligible for
installation.
(3) Within 30 days after performing the inspection required by
paragraph (e)(1) of this AD, provide, for all repaired blades, the
actual chordal width measurement to RRD, Service Engineering.
(f) Paperwork Reduction Act Burden Statement
For any reporting requirement in this AD, a federal agency may
not conduct or sponsor, and a person is not required to respond to,
nor shall a person be subject to a penalty for failure to comply
with a collection of information subject to the requirements of the
Paperwork Reduction Act unless that collection of information
displays a current valid OMB Control Number. The OMB Control Number
for this information collection is 2120-0056. Public reporting for
this collection of information is estimated to be approximately 5
minutes per response, including the time for reviewing instructions,
completing and reviewing the collection of information. All
responses to this collection of information are mandatory. Comments
concerning the accuracy of this burden and suggestions for reducing
the burden should be directed to the FAA at: 800 Independence Ave.
SW., Washington, DC 20591, Attn: Information Collection Clearance
Officer, AES-200.
(g) Alternative Methods of Compliance (AMOCs)
The Manager, Engine Certification Office, may approve AMOCs for
this AD. Use the procedures found in 14 CFR 39.19 to make your
request.
(h) Related Information
(1) For more information about this AD, contact Frederick Zink,
Aerospace Engineer, Engine Certification Office, FAA, Engine &
Propeller Directorate, 12 New England Executive Park, Burlington, MA
01803; phone: 781-238-7779; fax: 781-238-7199; email:
frederick.zink@faa.gov.
(2) Refer to European Aviation Safety Agency Emergency AD 2012-
0234, dated November 6, 2012, and RRD Alert NMSB TAY-72-A1777.
(3) For service information identified in this AD, contact
Rolls-Royce Deutschland Ltd & Co KG, Eschenweg 11, Dahlewitz, 15827
Blankenfelde-Mahlow, Germany; phone: 49 0 33-7086-1883; fax: 49 0
33-7086-3276. You may view this service information at FAA, Engine &
Propeller Directorate, 12 New England Executive Park, Burlington,
MA. For information on the availability of this material at the FAA,
call 781-238-7125.
(i) Material Incorporated by Reference
None.
Issued in Burlington, Massachusetts, on December 27, 2012.
Colleen M. D'Alessandro,
Assistant Manager, Engine & Propeller Directorate, Aircraft
Certification Service.
[FR Doc. 2013-00128 Filed 1-9-13; 8:45 am]
BILLING CODE 4910-13-P