Annual Surveys in the Manufacturing Area, 1833 [2013-00235]
Download as PDF
Federal Register / Vol. 78, No. 6 / Wednesday, January 9, 2013 / Notices
consider whether to approve the final
investigation report and
recommendations. All staff
presentations are preliminary and are
intended solely to allow the Board to
consider in a public forum the issues
and factors involved in this case. No
factual analyses, conclusions, or
findings presented by staff should be
considered final. Only after the Board
has considered the staff presentations,
listened to public comments, and
adopted a final investigation report and
recommendations will there be an
approved final record of the CSB
investigation of this incident.
The meeting will be free and open to
the public. If you require a translator or
interpreter, please notify the individual
listed below as the CONTACT PERSON FOR
FURTHER INFORMATION, at least five
business days prior to the meeting.
The CSB is an independent Federal
agency charged with investigating
industrial accidents that result in the
release of extremely hazardous
substances. The agency’s Board
Members are appointed by the President
and confirmed by the Senate. CSB
investigations look into all aspects of
accidents, including physical causes
such as equipment failure, as well as
inadequacies in regulations, industry
standards, and safety management
systems.
CONTACT PERSON FOR FURTHER
INFORMATION: Hillary J. Cohen,
Communications Manager,
hillary.cohen@csb.gov or 202–261–7600.
General information about the CSB can
be found on the agency Web site at:
www.csb.gov.
Dated: January 7, 2013.
Rafael Moure-Eraso,
Chairperson.
[FR Doc. 2013–00321 Filed 1–7–13; 4:15 pm]
BILLING CODE 6350–01–P
DEPARTMENT OF COMMERCE
Bureau of the Census
[Docket Number 121017555–2688–01]
Annual Surveys in the Manufacturing
Area
Bureau of the Census,
Department of Commerce.
ACTION: Notice of Determination.
AGENCY:
The Bureau of the Census
(Census Bureau) is conducting the 2013
Annual Surveys in the Manufacturing
Area. The 2013 Annual Surveys consist
of the Annual Survey of Manufactures,
the Business R&D and Innovation
Survey, and the Manufacturers’ Unfilled
srobinson on DSK4SPTVN1PROD with
SUMMARY:
VerDate Mar<15>2010
16:39 Jan 08, 2013
Jkt 229001
Orders Survey. We have determined
that annual data collected from these
surveys are needed to aid the efficient
performance of essential governmental
functions, and have significant
application to the needs of the public
and industry. The data derived from
these surveys, most of which have been
conducted for many years, are not
publicly available from
nongovernmental or other governmental
sources. For more information on these
surveys (e.g. forms and reporting
instructions, due dates, etc.), visit the
Census Bureau’s Business Help Site and
select the survey name.
The Census Bureau will
furnish report forms to organizations
included in the survey. Additional
copies are available upon written
request to the Director, U.S. Census
Bureau, Washington, DC 20233–0101.
ADDRESSES:
FOR FURTHER INFORMATION CONTACT:
Mendel D. Gayle, Chief, Manufacturing
and Construction Division at (301) 763–
4587 or by email at
mendel.d.gayle@census.gov.
The
Census Bureau is authorized to conduct
mandatory surveys necessary to furnish
current data on the subjects covered by
the major censuses authorized by Title
13, United States Code, sections 61, 81,
131, 182, 193, 224, and 225. Under this
authority, the Bureau of the Census
(Census Bureau) is conducting the 2013
Annual Surveys in the Manufacturing
Area. The 2013 Annual Surveys consist
of the Annual Survey of Manufactures,
the Business R&D and Innovation
Survey, and the Manufacturers’ Unfilled
Orders Survey.
The three surveys that will be
conducted in 2013 will provide
continuing and timely national
statistical data on manufacturing for the
period between economic censuses. The
data collected in the surveys will be
within the general scope and nature of
those inquiries covered in the economic
census. The next economic census will
be conducted for the year 2017.
SUPPLEMENTARY INFORMATION:
Annual Survey of Manufactures
The Annual Survey of Manufactures
collects industry statistics, such as total
value of shipments, employment,
payroll, workers’ hours, capital
expenditures, cost of materials
consumed, supplemental labor costs,
and other data related to manufacturing.
This survey is conducted on a sample
basis, and covers all manufacturing
industries, including data on plants
under construction, but not yet in
operation.
PO 00000
Frm 00010
Fmt 4703
Sfmt 9990
1833
Business R&D and Innovation Survey
The Business R&D and Innovation
Survey (BRDIS) measures spending on
research and development activities by
United States businesses. This survey
replaced the Survey of Industrial
Research and Development that had
been collected since the 1950’s. The
BRDIS collects global as well as
domestic spending information, more
detailed information about the R&D
workforce, and information regarding
innovation and intellectual property
from U.S. businesses. The Census
Bureau collects and compiles this
information in accordance with a joint
project agreement between the National
Science Foundation (NSF) and the
Census Bureau. The NSF publishes the
results in its publication series. All data
items are collected on a mandatory basis
under the authority of Title 13, United
States Code.
Manufacturers’ Unfilled Orders Survey
The Manufacturers’ Unfilled Orders
Survey collects data on sales and
unfilled orders in order to provide
annual benchmarks for unfilled orders
for the monthly Manufacturers’
Shipments, Inventories, and Orders
(M3) survey. The survey data will also
be used to determine whether it is
necessary to collect unfilled orders data
for specific industries on a monthly
basis; some industries are not requested
to provide unfilled orders data on the
M3 Survey.
Notwithstanding any other provision
of law, no person is required to respond
to, nor shall a person be subject to a
penalty for failure to comply with a
collection of information subject to the
requirements of the Paperwork
Reduction Act (PRA) unless that
collection of information displays a
current valid Office of Management and
Budget (OMB) control number. In
accordance with the PRA, 44 U.S.C.,
Chapter 45, OMB approved the Annual
Surveys under the following OMB
control numbers: Annual Survey of
Manufactures, 0607–0449; Business
R&D and Innovation Survey, 0607–0912;
and Manufacturers’ Unfilled Orders
Survey, 0607–0561.
Based upon the foregoing, I have
directed that the Annual Surveys in the
Manufacturing Area be conducted for
the purpose of collecting these data.
Dated: January 3, 2013.
Thomas L. Mesenbourg, Jr.,
Acting Director, Bureau of the Census.
[FR Doc. 2013–00235 Filed 1–8–13; 8:45 am]
BILLING CODE 3510–07–P
E:\FR\FM\09JAN1.SGM
09JAN1
Agencies
[Federal Register Volume 78, Number 6 (Wednesday, January 9, 2013)]
[Notices]
[Page 1833]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-00235]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Bureau of the Census
[Docket Number 121017555-2688-01]
Annual Surveys in the Manufacturing Area
AGENCY: Bureau of the Census, Department of Commerce.
ACTION: Notice of Determination.
-----------------------------------------------------------------------
SUMMARY: The Bureau of the Census (Census Bureau) is conducting the
2013 Annual Surveys in the Manufacturing Area. The 2013 Annual Surveys
consist of the Annual Survey of Manufactures, the Business R&D and
Innovation Survey, and the Manufacturers' Unfilled Orders Survey. We
have determined that annual data collected from these surveys are
needed to aid the efficient performance of essential governmental
functions, and have significant application to the needs of the public
and industry. The data derived from these surveys, most of which have
been conducted for many years, are not publicly available from
nongovernmental or other governmental sources. For more information on
these surveys (e.g. forms and reporting instructions, due dates, etc.),
visit the Census Bureau's Business Help Site and select the survey
name.
ADDRESSES: The Census Bureau will furnish report forms to organizations
included in the survey. Additional copies are available upon written
request to the Director, U.S. Census Bureau, Washington, DC 20233-0101.
FOR FURTHER INFORMATION CONTACT: Mendel D. Gayle, Chief, Manufacturing
and Construction Division at (301) 763-4587 or by email at
mendel.d.gayle@census.gov.
SUPPLEMENTARY INFORMATION: The Census Bureau is authorized to conduct
mandatory surveys necessary to furnish current data on the subjects
covered by the major censuses authorized by Title 13, United States
Code, sections 61, 81, 131, 182, 193, 224, and 225. Under this
authority, the Bureau of the Census (Census Bureau) is conducting the
2013 Annual Surveys in the Manufacturing Area. The 2013 Annual Surveys
consist of the Annual Survey of Manufactures, the Business R&D and
Innovation Survey, and the Manufacturers' Unfilled Orders Survey.
The three surveys that will be conducted in 2013 will provide
continuing and timely national statistical data on manufacturing for
the period between economic censuses. The data collected in the surveys
will be within the general scope and nature of those inquiries covered
in the economic census. The next economic census will be conducted for
the year 2017.
Annual Survey of Manufactures
The Annual Survey of Manufactures collects industry statistics,
such as total value of shipments, employment, payroll, workers' hours,
capital expenditures, cost of materials consumed, supplemental labor
costs, and other data related to manufacturing. This survey is
conducted on a sample basis, and covers all manufacturing industries,
including data on plants under construction, but not yet in operation.
Business R&D and Innovation Survey
The Business R&D and Innovation Survey (BRDIS) measures spending on
research and development activities by United States businesses. This
survey replaced the Survey of Industrial Research and Development that
had been collected since the 1950's. The BRDIS collects global as well
as domestic spending information, more detailed information about the
R&D workforce, and information regarding innovation and intellectual
property from U.S. businesses. The Census Bureau collects and compiles
this information in accordance with a joint project agreement between
the National Science Foundation (NSF) and the Census Bureau. The NSF
publishes the results in its publication series. All data items are
collected on a mandatory basis under the authority of Title 13, United
States Code.
Manufacturers' Unfilled Orders Survey
The Manufacturers' Unfilled Orders Survey collects data on sales
and unfilled orders in order to provide annual benchmarks for unfilled
orders for the monthly Manufacturers' Shipments, Inventories, and
Orders (M3) survey. The survey data will also be used to determine
whether it is necessary to collect unfilled orders data for specific
industries on a monthly basis; some industries are not requested to
provide unfilled orders data on the M3 Survey.
Notwithstanding any other provision of law, no person is required
to respond to, nor shall a person be subject to a penalty for failure
to comply with a collection of information subject to the requirements
of the Paperwork Reduction Act (PRA) unless that collection of
information displays a current valid Office of Management and Budget
(OMB) control number. In accordance with the PRA, 44 U.S.C., Chapter
45, OMB approved the Annual Surveys under the following OMB control
numbers: Annual Survey of Manufactures, 0607-0449; Business R&D and
Innovation Survey, 0607-0912; and Manufacturers' Unfilled Orders
Survey, 0607-0561.
Based upon the foregoing, I have directed that the Annual Surveys
in the Manufacturing Area be conducted for the purpose of collecting
these data.
Dated: January 3, 2013.
Thomas L. Mesenbourg, Jr.,
Acting Director, Bureau of the Census.
[FR Doc. 2013-00235 Filed 1-8-13; 8:45 am]
BILLING CODE 3510-07-P