Government-Owned Inventions, Available for Licensing, 54933-54934 [2012-21911]
Download as PDF
<![CDATA[
54933
Federal Register / Vol. 77, No. 173 / Thursday, September 6, 2012 / Notices
TA–W number
Subject firm
81,886 .........................
Monroe Gray, dba Shirley Elaine .................
I hereby certify that the aforementioned
determinations were issued during the period
of August 20, 2012 through August 24, 2012.
These determinations are available on the
Department’s Web site tradeact/taa/taa search
form.cfm under the searchable listing of
determinations or by calling the Office of
Trade Adjustment Assistance toll free at 888–
365–6822.
Dated: August 29, 2012.
Elliott S. Kushner,
Certifying Officer, Office of Trade Adjustment
Assistance.
[FR Doc. 2012–21869 Filed 9–5–12; 8:45 am]
BILLING CODE 4510–FN–P
DEPARTMENT OF LABOR
Employment and Training
Administration
Investigations Regarding Eligibility To
Apply for Worker Adjustment
Assistance
Petitions have been filed with the
Secretary of Labor under Section 221(a)
Location
Impact date
Cameron, LA.
of the Trade Act of 1974 (‘‘the Act’’) and
are identified in the Appendix to this
notice. Upon receipt of these petitions,
the Director of the Office of Trade
Adjustment Assistance, Employment
and Training Administration, has
instituted investigations pursuant to
Section 221(a) of the Act.
The purpose of each of the
investigations is to determine whether
the workers are eligible to apply for
adjustment assistance under Title II,
Chapter 2, of the Act. The investigations
will further relate, as appropriate, to the
determination of the date on which total
or partial separations began or
threatened to begin and the subdivision
of the firm involved.
The petitioners or any other persons
showing a substantial interest in the
subject matter of the investigations may
request a public hearing, provided such
request is filed in writing with the
Director, Office of Trade Adjustment
Assistance, at the address shown below,
not later than September 17, 2012.
Interested persons are invited to
submit written comments regarding the
subject matter of the investigations to
the Director, Office of Trade Adjustment
Assistance, at the address shown below,
not later than September 17, 2012.
The petitions filed in this case are
available for inspection at the Office of
the Director, Office of Trade Adjustment
Assistance, Employment and Training
Administration, U.S. Department of
Labor, Room N–5428, 200 Constitution
Avenue NW., Washington, DC 20210.
Signed at Washington, DC, this 29th day of
August 2012.
Elliott S. Kushner,
Certifying Officer, Office of Trade Adjustment
Assistance.
APPENDIX
[15 TAA petitions instituted between 8/20/12 and 8/24/12]
TA–W
81905
81906
81907
81908
81909
81910
81911
81912
81913
81914
81915
81916
81917
81918
81919
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
Location
Welded Tube (State/One-Stop) ..............................................
Pratt & Whitney, Rocketdyne (State/One-Stop) .....................
Mohawk Industries (State/One-Stop) .....................................
Rotek Incorporated (Company) ..............................................
Supervalu Holdings, Inc. (State/One-Stop) ............................
IPS Worldwide LLC (State/One-Stop) ....................................
Exide Technologies (Workers) ...............................................
Fremont-Rideout Health Group (Workers) .............................
Millipore Corporation (Workers) .............................................
Belden (Company) .................................................................
SuperValu (Workers) ..............................................................
Veolia Environmental Services (State/One-Stop) ..................
Automotive Quality Associates (State/One-Stop) ..................
Avnet, Inc. (Mariposa Industrial Park #1) (State/One-Stop) ..
Prometric (State/One-Stop) ....................................................
Huger, SC ..............................
Canoga Park, CA ...................
Bennettsville, SC ...................
Aurora, OH .............................
Pleasant Prairie, WI ...............
Cumberland, MD ....................
Frisco, TX ..............................
Marysville, CA ........................
Phillipsburg, NJ ......................
Worcester, MA .......................
Boise, ID ................................
Shreveport, LA .......................
Shreveport, LA .......................
Nogales, AZ ...........................
Saint Paul, MN .......................
[FR Doc. 2012–21868 Filed 9–5–12; 8:45 am]
BILLING CODE 4510–FN–P
Notice of availability of
inventions for licensing.
ACTION:
Patent applications on the
inventions listed below assigned to the
National Aeronautics and Space
Administration, have been filed in the
United States Patent and Trademark
Office, and are available for licensing.
TKELLEY on DSK3SPTVN1PROD with NOTICES
SUMMARY:
NATIONAL AERONAUTICS AND
SPACE ADMINISTRATION
[Notice (12–067)]
Government-Owned Inventions,
Available for Licensing
DATES:
National Aeronautics and
Space Administration.
Robin W. Edwards, Patent Counsel,
Langley Research Center, Mail Stop 30,
AGENCY:
VerDate Mar<15>2010
Date of
institution
Subject Firm (petitioners)
18:45 Sep 05, 2012
Jkt 226001
September 6, 2012.
FOR FURTHER INFORMATION CONTACT:
PO 00000
Frm 00060
Fmt 4703
Sfmt 4703
08/21/12
08/21/12
08/21/12
08/21/12
08/23/12
08/23/12
08/23/12
08/23/12
08/24/12
08/24/12
08/24/12
08/24/12
08/24/12
08/24/12
08/24/12
Date of
petition
08/20/12
07/23/12
08/20/12
08/20/12
08/22/12
08/22/12
08/22/12
08/18/12
08/23/12
08/23/12
08/23/12
08/23/12
08/23/12
08/23/12
08/23/12
Hampton, VA 23681–2199; telephone
(757) 864–3230; fax (757) 864–9190.
NASA Case No.: LAR–17485–2: Metal/
Fiber Laminate and Fabrication Using
a Porous Metal/Fiber Preform;
NASA Case No.: LAR–17791–1: Method
for Producing Heavy Electrons:
NASA Case No.: LAR–17789–1:
Electroactive Scaffold;
NASA Case No.: LAR–17799–1:
Methods of Real Time Image
Enhancement of Flash LIDAR Data
and Navigating a Vehicle Using Flash
LIDAR Data;
E:\FR\FM\06SEN1.SGM
06SEN1
TKELLEY on DSK3SPTVN1PROD with NOTICES
54934
Federal Register / Vol. 77, No. 173 / Thursday, September 6, 2012 / Notices
NASA Case No.: LAR–18023–1: Landing
Gear Door Liners for Airframe Noise
Reduction;
NASA Case No.: LAR–17555–1: Lock-In
Imaging System for Detecting
Disturbances in Fluid;
NASA Case No.: LAR–17318–1:
Preparation of Metal Nanowire
Decorated Carbon Allotropes;
NASA Case No.: LAR–17869–1: Team
Electronic Gameplay Combining
Different Means of Control;
NASA Case No.: LAR–18016–1:
Wireless Temperature Sensor Having
No Electrical Connections and
Sensing Method for Use Therewith;
NASA Case No.: LAR–17681–1: Method
and System for Repairing Cracks in
Structures;
NASA Case No.: LAR–17919–1:
Methods of Making Z-Shielding;
NASA Case No.: LAR–17735–1:
Assessment and Calibration of a
Crimp Tool Equipped with Ultrasonic
Analysis Features;
NASA Case No.: LAR–17967–1:
Multistage Force Amplification of
Piezoelectric Stacks;
NASA Case No.: LAR–17455–2: A
Nanotube Film Electrode and an
Electroactive Device Fabricated with
the Nanotube Film Electrode and
Methods for Making Same;
NASA Case No.: LAR–17952–1: MultiPoint Interferometric Phase Change
Detection Method;
NASA Case No.: LAR–17689–1:
Negative Dielectric Constant Material
Based on Ion Conducting Materials;
NASA Case No.: LAR–17857–1: InFlight Pitot-Static Calibration;
NASA Case No.: LAR–17906–1:
Abnormal Grain Growth Suppression
in Aluminum Alloys;
NASA Case No.: LAR–17833–1: Active
Aircraft Pylon Noise Control System;
NASA Case No.: LAR–17908–1:
Photogrammetry System and Method
for Determining Relative Motion
Between Two Bodies;
NASA Case No.: LAR–17877–1:
Autonomous Slat-Cove-Filler Device
for Reduction of Aeroacoustic Noise
Associated with Aircraft Systems;
NASA Case No.: LAR–17832–1: Aircraft
Engine Exhaust Nozzle System for Jet
Noise Reduction;
NASA Case No.: LAR–17985–1: An
Acoustic Beam Forming Array Using
Feedback-Controlled Microphones for
Tuning and Self-Matching of
Frequency Response;
NASA Case No.: LAR–17994–1: Method
for Manufacturing a Thin Film
Structural System;
NASA Case No.: LAR–17836–1: SubSurface Windscreen for Outdoor
Measurement of Intrasound;
NASA Case No.: LAR–17894–1: A
Method for Enhancing a Three
VerDate Mar<15>2010
18:45 Sep 05, 2012
Jkt 226001
Dimensional Image from a Pluralitry
of Frames of Flash LIDAR Data;
NASA Case No.: LAR–17786–1: Smart
Optical Material Characterization
System and Method;
NASA Case No.: LAR–17958–1:
Wireless Open-Circuit In-Plane Strain
and Displacement Sensor Requiring
No Electrical Connections;
NASA Case No.: LAR–18026–1:
Anisotropic Copoly(imide Oxetane)
Coatings and Articles of Manufacture,
Copoly(imide Oxetane)s Containing
Pendant Fluorocarbon Moieties,
Oligomers and Processes Therefor;
NASA Case No.: LAR–17638–1:
Antenna with Dielectric Having
Geometric Patterns;
NASA Case No.: LAR–17987–1: FaultTolerant Self-Stabilizing Distributed
Clock Synchronization Protocol for
Arbitrary Digraphs;
NASA Case No.: LAR–17895–1:
Physiologically Modulating
Videogames or Simulations Which
Use Motion-Sensing Input Devices;
NASA Case No.: LAR–17923–1: A
Method of Creating Micro-Scale Silver
Telluride Grains Covered with
Bismuth Nanoparticles;
NASA Case No.: LAR–17888–1: Time
Shifted PN Codes for CW LIDAR,
RADAR, and SONAR;
NASA Case No.: LAR–17813–1:
Systems, Apparatuses, and Methods
for Using Durable Adhesively Bonded
Joints for Sandwich Structures;
NASA Case No.: LAR–17769–1:
Modification of Surface Energy via
Direct Laser Ablative Surface
Patterning;
NASA Case No.: LAR–17694–1: Fourier
Transform Spectrometer System;
NASA Case No.: LAR–17831–1: Blended
Cutout Flap for the Reduction of JetFlap Interaction Noise;
NASA Case No.: LAR–17386–1: FineGrained Targets for Laser Synthesis of
Carbon Nanotubes;
NASA Case No.: LAR–17149–2:
Mechanically Strong, Thermally
Stable, and Electrically Conductive
Nanocomposite Structure and Method
of Fabricating Same;
NASA Case No.: LAR–17747–1:
Wireless Temperature Sensing Having
No Electrical Connections and
Sensing Method for Use Therewith;
NASA Case No.: LAR–17993–1:
Locomotion of Amorphous Surface
Robots;
NASA Case No.: LAR–17886–1: Method
and Apparatus to Detect Wire
Pathologies Near Crimped Connector;
NASA Case No.: LAR–18006–1: Process
and Apparatus for Nondestructive
Evaluation of the Quality of a
Crimped Wire Connector;
NASA Case No.: LAR–17332–2: Jet
Engine Exhaust Nozzle Flow Effector;
PO 00000
Frm 00061
Fmt 4703
Sfmt 4703
NASA Case No.: LAR–17743–1:
Stackable Form-Factor Peripheral
Component Interconnect Device and
Assembly;
NASA Case No.: LAR–17088–1:
Nanotubular Toughening Inclusions;
NASA Case No.: LAR–16565–1: Electric
Field Quantitative Measurement
System and Method;
NASA Case No.: LAR–17959–1: Method
of Making a Composite Panel Having
Subsonic Transverse Wave Speed
Characteristics;
NASA Case No.: LAR–18034–1:
Compact Active Vibration Control
System for a Flexible Panel;
NASA Case No.: LAR–17984–1:
Elastically Deformable Side-Edge Link
for Trailing-Edge Flap Aeroacoustic
Noise Reduction;
NASA Case No.: LAR–18024–1: External
Acoustic Liners for Multi-Functional
Aircraft Noise Reduction;
NASA Case No.: LAR–17705–1:
Compact Vibration Damper;
NASA Case No.: LAR–18021–1: Flap
Side Edge Liners for Airframe Noise
Reduction.
Sumara M. Thompson-King,
Acting Deputy General Counsel.
[FR Doc. 2012–21911 Filed 9–5–12; 8:45 am]
BILLING CODE P
NATIONAL AERONAUTICS AND
SPACE ADMINISTRATION
[Notice (12–062)]
Government-Owned Inventions,
Available for Licensing
National Aeronautics and
Space Administration.
ACTION: Notice of availability of
inventions for licensing.
AGENCY:
Patent applications on the
inventions listed below assigned to the
National Aeronautics and Space
Administration, have been filed in the
United States Patent and Trademark
Office, and are available for licensing.
DATES: September 6, 2012.
FOR FURTHER INFORMATION CONTACT:
Robert M. Padilla, Patent Counsel, Ames
Research Center, Code 202A–4, Moffett
Field, CA 94035–1000; telephone (650)
604–5104; fax (650) 604–2767.
NASA Case No.: ARC–16419–1:
Stroboscopic Image Modulation to
Reduce the Visual Blur of an Object
Being Viewed by an Observer
Experiencing Vibration;
NASA Case No.: ARC–16386–1: Visual
Display and Comparison of Systems
Operation in Different Modes;
NASA Case No.: ARC–16351–1:
Movable Ground Based Recovery
SUMMARY:
E:\FR\FM\06SEN1.SGM
06SEN1
]]>Agencies
[Federal Register Volume 77, Number 173 (Thursday, September 6, 2012)]
[Notices]
[Pages 54933-54934]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2012-21911]
=======================================================================
-----------------------------------------------------------------------
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION
[Notice (12-067)]
Government-Owned Inventions, Available for Licensing
AGENCY: National Aeronautics and Space Administration.
ACTION: Notice of availability of inventions for licensing.
-----------------------------------------------------------------------
SUMMARY: Patent applications on the inventions listed below assigned to
the National Aeronautics and Space Administration, have been filed in
the United States Patent and Trademark Office, and are available for
licensing.
DATES: September 6, 2012.
FOR FURTHER INFORMATION CONTACT: Robin W. Edwards, Patent Counsel,
Langley Research Center, Mail Stop 30, Hampton, VA 23681-2199;
telephone (757) 864-3230; fax (757) 864-9190.
NASA Case No.: LAR-17485-2: Metal/Fiber Laminate and Fabrication Using
a Porous Metal/Fiber Preform;
NASA Case No.: LAR-17791-1: Method for Producing Heavy Electrons:
NASA Case No.: LAR-17789-1: Electroactive Scaffold;
NASA Case No.: LAR-17799-1: Methods of Real Time Image Enhancement of
Flash LIDAR Data and Navigating a Vehicle Using Flash LIDAR Data;
[[Page 54934]]
NASA Case No.: LAR-18023-1: Landing Gear Door Liners for Airframe Noise
Reduction;
NASA Case No.: LAR-17555-1: Lock-In Imaging System for Detecting
Disturbances in Fluid;
NASA Case No.: LAR-17318-1: Preparation of Metal Nanowire Decorated
Carbon Allotropes;
NASA Case No.: LAR-17869-1: Team Electronic Gameplay Combining
Different Means of Control;
NASA Case No.: LAR-18016-1: Wireless Temperature Sensor Having No
Electrical Connections and Sensing Method for Use Therewith;
NASA Case No.: LAR-17681-1: Method and System for Repairing Cracks in
Structures;
NASA Case No.: LAR-17919-1: Methods of Making Z-Shielding;
NASA Case No.: LAR-17735-1: Assessment and Calibration of a Crimp Tool
Equipped with Ultrasonic Analysis Features;
NASA Case No.: LAR-17967-1: Multistage Force Amplification of
Piezoelectric Stacks;
NASA Case No.: LAR-17455-2: A Nanotube Film Electrode and an
Electroactive Device Fabricated with the Nanotube Film Electrode and
Methods for Making Same;
NASA Case No.: LAR-17952-1: Multi-Point Interferometric Phase Change
Detection Method;
NASA Case No.: LAR-17689-1: Negative Dielectric Constant Material Based
on Ion Conducting Materials;
NASA Case No.: LAR-17857-1: In-Flight Pitot-Static Calibration;
NASA Case No.: LAR-17906-1: Abnormal Grain Growth Suppression in
Aluminum Alloys;
NASA Case No.: LAR-17833-1: Active Aircraft Pylon Noise Control System;
NASA Case No.: LAR-17908-1: Photogrammetry System and Method for
Determining Relative Motion Between Two Bodies;
NASA Case No.: LAR-17877-1: Autonomous Slat-Cove-Filler Device for
Reduction of Aeroacoustic Noise Associated with Aircraft Systems;
NASA Case No.: LAR-17832-1: Aircraft Engine Exhaust Nozzle System for
Jet Noise Reduction;
NASA Case No.: LAR-17985-1: An Acoustic Beam Forming Array Using
Feedback-Controlled Microphones for Tuning and Self-Matching of
Frequency Response;
NASA Case No.: LAR-17994-1: Method for Manufacturing a Thin Film
Structural System;
NASA Case No.: LAR-17836-1: Sub-Surface Windscreen for Outdoor
Measurement of Intrasound;
NASA Case No.: LAR-17894-1: A Method for Enhancing a Three Dimensional
Image from a Pluralitry of Frames of Flash LIDAR Data;
NASA Case No.: LAR-17786-1: Smart Optical Material Characterization
System and Method;
NASA Case No.: LAR-17958-1: Wireless Open-Circuit In-Plane Strain and
Displacement Sensor Requiring No Electrical Connections;
NASA Case No.: LAR-18026-1: Anisotropic Copoly(imide Oxetane) Coatings
and Articles of Manufacture, Copoly(imide Oxetane)s Containing Pendant
Fluorocarbon Moieties, Oligomers and Processes Therefor;
NASA Case No.: LAR-17638-1: Antenna with Dielectric Having Geometric
Patterns;
NASA Case No.: LAR-17987-1: Fault-Tolerant Self-Stabilizing Distributed
Clock Synchronization Protocol for Arbitrary Digraphs;
NASA Case No.: LAR-17895-1: Physiologically Modulating Videogames or
Simulations Which Use Motion-Sensing Input Devices;
NASA Case No.: LAR-17923-1: A Method of Creating Micro-Scale Silver
Telluride Grains Covered with Bismuth Nanoparticles;
NASA Case No.: LAR-17888-1: Time Shifted PN Codes for CW LIDAR, RADAR,
and SONAR;
NASA Case No.: LAR-17813-1: Systems, Apparatuses, and Methods for Using
Durable Adhesively Bonded Joints for Sandwich Structures;
NASA Case No.: LAR-17769-1: Modification of Surface Energy via Direct
Laser Ablative Surface Patterning;
NASA Case No.: LAR-17694-1: Fourier Transform Spectrometer System;
NASA Case No.: LAR-17831-1: Blended Cutout Flap for the Reduction of
Jet-Flap Interaction Noise;
NASA Case No.: LAR-17386-1: Fine-Grained Targets for Laser Synthesis of
Carbon Nanotubes;
NASA Case No.: LAR-17149-2: Mechanically Strong, Thermally Stable, and
Electrically Conductive Nanocomposite Structure and Method of
Fabricating Same;
NASA Case No.: LAR-17747-1: Wireless Temperature Sensing Having No
Electrical Connections and Sensing Method for Use Therewith;
NASA Case No.: LAR-17993-1: Locomotion of Amorphous Surface Robots;
NASA Case No.: LAR-17886-1: Method and Apparatus to Detect Wire
Pathologies Near Crimped Connector;
NASA Case No.: LAR-18006-1: Process and Apparatus for Nondestructive
Evaluation of the Quality of a Crimped Wire Connector;
NASA Case No.: LAR-17332-2: Jet Engine Exhaust Nozzle Flow Effector;
NASA Case No.: LAR-17743-1: Stackable Form-Factor Peripheral Component
Interconnect Device and Assembly;
NASA Case No.: LAR-17088-1: Nanotubular Toughening Inclusions;
NASA Case No.: LAR-16565-1: Electric Field Quantitative Measurement
System and Method;
NASA Case No.: LAR-17959-1: Method of Making a Composite Panel Having
Subsonic Transverse Wave Speed Characteristics;
NASA Case No.: LAR-18034-1: Compact Active Vibration Control System for
a Flexible Panel;
NASA Case No.: LAR-17984-1: Elastically Deformable Side-Edge Link for
Trailing-Edge Flap Aeroacoustic Noise Reduction;
NASA Case No.: LAR-18024-1: External Acoustic Liners for Multi-
Functional Aircraft Noise Reduction;
NASA Case No.: LAR-17705-1: Compact Vibration Damper;
NASA Case No.: LAR-18021-1: Flap Side Edge Liners for Airframe Noise
Reduction.
Sumara M. Thompson-King,
Acting Deputy General Counsel.
[FR Doc. 2012-21911 Filed 9-5-12; 8:45 am]
BILLING CODE P
