Airworthiness Directives; Pratt & Whitney Division Turbofan Engines, 40822-40823 [2012-16857]
Download as PDF
40822
Federal Register / Vol. 77, No. 133 / Wednesday, July 11, 2012 / Proposed Rules
England, DE248BJ; phone: 011–44–1332–
242424; fax: 011–44–1332–245418 or email
from https://www.rolls-royce.com/contact/
civil_team.jsp, or download the publication
from https://www.aeromanager.com. You
may review copies of the referenced service
information at the FAA, Engine & Propeller
Directorate, 12 New England Executive Park,
Burlington, MA. For information on the
availability of this material at the FAA, call
781–238–7125.
Issued in Burlington, Massachusetts, on
June 25, 2012.
Peter A. White,
Manager, Engine & Propeller Directorate,
Aircraft Certification Service.
[FR Doc. 2012–16856 Filed 7–10–12; 8:45 am]
BILLING CODE 4910–13–P
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA–2012–0546; Directorate
Identifier 2012–NE–15–AD]
RIN 2120–AA64
Airworthiness Directives; Pratt &
Whitney Division Turbofan Engines
Federal Aviation
Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking
(NPRM).
AGENCY:
We propose to adopt a new
airworthiness directive (AD) for all Pratt
& Whitney PW4050, PW4052, PW4056,
PW4060, PW4060A, PW4060C,
PW4062, PW4062A, PW4152, PW4156,
PW4156A, PW4158, PW4160, PW4460,
PW4462, and PW4650 turbofan engines,
including models with any dash number
suffix. This proposed AD was prompted
by 16 reports of damaged or failed 3rd
stage low-pressure turbine (LPT) duct
segments. This proposed AD would
require removing from service certain
part numbers (P/Ns) of 3rd stage LPT
duct segments. We are proposing this
AD to prevent failure of the 3rd stage
LPT duct segments, which could lead to
LPT rotor damage, uncontained engine
failure, and damage to the airplane.
DATES: We must receive comments on
this proposed AD by September 10,
2012.
ADDRESSES: You may send comments,
using the procedures found in 14 CFR
11.43 and 11.45, by any of the following
methods:
• Federal eRulemaking Portal: Go to
https://www.regulations.gov. Follow the
instructions for submitting comments.
• Fax: 202–493–2251.
• Mail: U.S. Department of
Transportation, Docket Operations,
erowe on DSK2VPTVN1PROD with PROPOSALS-1
SUMMARY:
VerDate Mar<15>2010
14:44 Jul 10, 2012
Jkt 226001
M–30, West Building Ground Floor,
Room W12–140, 1200 New Jersey
Avenue SE., Washington, DC 20590.
• Hand Delivery: Deliver to Mail
address above between 9 a.m. and
5 p.m., Monday through Friday, except
Federal holidays.
For service information identified in
this proposed AD, contact Pratt &
Whitney, 400 Main St., East Hartford,
CT 06108; phone: 860–565–8770; fax:
860–565–4503. You may review copies
of the referenced service information at
the FAA, Engine & Propeller Directorate,
12 New England Executive Park,
Burlington, MA. For information on the
availability of this material at the FAA,
call 781–238–7125.
Examining the AD Docket
You may examine the AD docket on
the Internet at https://
www.regulations.gov; or in person at the
Docket Management Facility between
9 a.m. and 5 p.m., Monday through
Friday, except Federal holidays. The AD
docket contains this proposed AD, the
regulatory evaluation, any comments
received, and other information. The
street address for the Docket Office
(phone: 800–647–5527) is in the
ADDRESSES section. Comments will be
available in the AD docket shortly after
receipt.
FOR FURTHER INFORMATION CONTACT:
James Gray, Aerospace Engineer, Engine
& Propeller Directorate, FAA, 12 New
England Executive Park, Burlington, MA
01803; phone: 781–238–7742; fax: 781–
238–7199; email: james.e.gray@faa.gov.
SUPPLEMENTARY INFORMATION:
Comments Invited
We invite you to send any written
relevant data, views, or arguments about
this proposal. Send your comments to
an address listed under the ADDRESSES
section. Include ‘‘Docket No. FAA–
2012–0546; Directorate Identifier 2012–
NE–15–AD’’ at the beginning of your
comments. We specifically invite
comments on the overall regulatory,
economic, environmental, and energy
aspects of this proposed AD. We will
consider all comments received by the
closing date and may amend this
proposed AD because of those
comments.
We will post all comments we
receive, without change, to https://
www.regulations.gov, including any
personal information you provide. We
will also post a report summarizing each
substantive verbal contact we receive
about this proposed AD.
Discussion
We received 16 reports of damaged or
failed 3rd stage LPT duct segments that
PO 00000
Frm 00006
Fmt 4702
Sfmt 4702
resulted in 5 in-flight shutdowns, two of
which were uncontained engine
failures. The 3rd stage LPT duct
segment assembly has seal plates that
are attached with rivets. During normal
engine operation, vibration may cause
these seal plates to loosen or fall off,
which allows hot gaspath air to enter
the cavity behind the duct. This can
cause the 3rd stage LPT duct segment to
distort, fall into the gaspath, and
damage the downstream LPT rotor
blades. This condition, if not corrected,
could result in failure of the 3rd stage
LPT duct segments, which could lead to
LPT rotor damage, uncontained engine
failure, and damage to the airplane.
Relevant Service Information
We reviewed Pratt & Whitney EngineDuct Segment, Third Stage LPT
Assembly Service Bulletin (SB) No.
PW4ENG 72–488, Revision 3, dated
August 13, 2009. The SB lists the part
numbers of parts to be removed and
parts to be installed.
FAA’s Determination
We are proposing this AD because we
evaluated all the relevant information
and determined the unsafe condition
described previously is likely to exist or
develop in other products of the same
type design.
Proposed AD Requirements
This proposed AD would require
removal from service of 3rd stage LPT
duct segments P/Ns 50N095; 50N095–
001; 50N235; 50N235–001; 50N494–01;
50N494–001; 50N495–01; and 50N495–
001, at the next piece-part exposure
after the effective date of the proposed
AD.
Costs of Compliance
We estimate that this proposed AD
would affect 151 engines installed on
airplanes of U.S. registry. We estimate
that no additional labor costs would be
incurred to perform the required work
as the work is done when the 3rd stage
LPT duct segments are at piece-part
exposure. The average labor rate is $85
per work-hour. Required parts would
cost about $44,441 per engine. Based on
these figures, we estimate the total cost
of the AD to U.S. operators to be
$6,710,591.
Authority for This Rulemaking
Title 49 of the United States Code
specifies the FAA’s authority to issue
rules on aviation safety. Subtitle I,
section 106, describes the authority of
the FAA Administrator. Subtitle VII:
Aviation Programs, describes in more
detail the scope of the Agency’s
authority.
E:\FR\FM\11JYP1.SGM
11JYP1
Federal Register / Vol. 77, No. 133 / Wednesday, July 11, 2012 / Proposed Rules
We are issuing this rulemaking under
the authority described in Subtitle VII,
Part A, Subpart III, Section 44701:
‘‘General requirements.’’ Under that
section, Congress charges the FAA with
promoting safe flight of civil aircraft in
air commerce by prescribing regulations
for practices, methods, and procedures
the Administrator finds necessary for
safety in air commerce. This regulation
is within the scope of that authority
because it addresses an unsafe condition
that is likely to exist or develop on
products identified in this rulemaking
action.
Regulatory Findings
We determined that this proposed AD
would not have federalism implications
under Executive Order 13132. This
proposed AD would not have a
substantial direct effect on the States, on
the relationship between the national
Government and the States, or on the
distribution of power and
responsibilities among the various
levels of government.
For the reasons discussed above, I
certify this proposed regulation:
(1) Is not a ‘‘significant regulatory
action’’ under Executive Order 12866,
(2) Is not a ‘‘significant rule’’ under
the DOT Regulatory Policies and
Procedures (44 FR 11034, February 26,
1979),
(3) Will not affect intrastate aviation
in Alaska, and
(4) Will not have a significant
economic impact, positive or negative,
on a substantial number of small entities
under the criteria of the Regulatory
Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation
safety, Incorporation by reference,
Safety.
The Proposed Amendment
Accordingly, under the authority
delegated to me by the Administrator,
the FAA proposes to amend 14 CFR part
39 as follows:
PART 39—AIRWORTHINESS
DIRECTIVES
erowe on DSK2VPTVN1PROD with PROPOSALS-1
1. The authority citation for part 39
continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
§ 39.13
[Amended]
2. The FAA amends § 39.13 by adding
the following new airworthiness
directive (AD):
Pratt & Whitney Division: Docket No. FAA–
2012–0546; Directorate Identifier 2012–
NE–15–AD.
VerDate Mar<15>2010
14:44 Jul 10, 2012
Jkt 226001
(a) Comments Due Date
We must receive comments by September
10, 2012.
(b) Affected ADs
None.
40823
565–8770; fax: 860–565–4503. You may
review copies of the service information at
the FAA, Engine & Propeller Directorate, 12
New England Executive Park, Burlington,
MA. For information on the availability of
this material at the FAA, call 781–238–7125.
(c) Applicability
This AD applies to all Pratt & Whitney
PW4050, PW4052, PW4056, PW4060,
PW4060A, PW4060C, PW4062, PW4062A,
PW4152, PW4156, PW4156A, PW4158,
PW4160, PW4460, PW4462, and PW4650
turbofan engines, including models with any
dash number suffix, with 3rd stage LPT duct
segments P/N 50N095; 50N095–001; 50N235;
50N235–001; 50N494–01; 50N494–001;
50N495–01; or 50N495–001, installed.
Issued in Burlington, Massachusetts, on
July 2, 2012.
Peter A. White,
Manager, Engine & Propeller Directorate,
Aircraft Certification Service.
(d) Unsafe Condition
This AD was prompted by 16 reports of
damaged or failed 3rd stage low-pressure
turbine (LPT) duct segments. We are issuing
this AD to prevent failure of the 3rd stage
LPT duct segments, which could lead to LPT
rotor damage, uncontained engine failure,
and damage to the airplane.
Federal Aviation Administration
(e) Compliance
Comply with this AD within the
compliance times specified, unless already
done.
Airworthiness Directives; Airbus
Airplanes
(f) 3rd Stage LPT Duct Segments Removal
From Service
At the next piece-part exposure after the
effective date of this AD, remove from service
3rd stage LPT duct segments, P/Ns 50N095;
50N095–001; 50N235; 50N235–001; 50N494–
01; 50N494–001; 50N495–01; and 50N495–
001.
(g) Installation Prohibition
After the effective date of this AD, do not
install into any engine any 3rd stage LPT
duct segment, P/N 50N095; 50N095–001;
50N235; 50N235–001; 50N494–01; 50N494–
001; 50N495–01; or 50N495–001, that is at
piece-part exposure.
(h) Definition
For the purpose of this AD, piece-part
exposure is when the 3rd stage LPT duct
segment is removed from the engine and
completely disassembled.
(i) Alternative Methods of Compliance
(AMOCs)
The Manager, Engine Certification Office,
may approve AMOCs for this AD. Use the
procedures found in 14 CFR 39.19 to make
your request.
(j) Related Information
(1) Pratt & Whitney Engine-Duct Segment,
Third Stage LPT Assembly Service Bulletin
(SB) No. PW4ENG 72–488, Revision 3, dated
August 13, 2009.
(2) For more information about this AD,
contact James Gray, Aerospace Engineer,
Engine & Propeller Directorate, FAA, 12 New
England Executive Park, Burlington, MA
01803; phone: 781–238–7742; fax: 781–238–
7199; email: james.e.gray@faa.gov.
(3) For service information identified in
this AD, contact Pratt & Whitney, 400 Main
St., East Hartford, CT 06108; phone: 860–
PO 00000
Frm 00007
Fmt 4702
Sfmt 4702
[FR Doc. 2012–16857 Filed 7–10–12; 8:45 am]
BILLING CODE 4910–13–P
DEPARTMENT OF TRANSPORTATION
14 CFR Part 39
[Docket No. FAA–2012–0150; Directorate
Identifier 2011–NM–234–AD]
RIN 2120–AA64
Federal Aviation
Administration (FAA), DOT.
ACTION: Supplemental notice of
proposed rulemaking (NPRM);
reopening of comment period.
AGENCY:
We are revising an earlier
proposed airworthiness directive (AD)
for all Airbus Model A318 series
airplanes, Airbus Model A319 series
airplanes, Airbus Model A320 series
airplanes, and Airbus Model A321
series airplanes. That NPRM proposed
an inspection to determine if certain
angle of attack (AOA) probes are
installed, and replacing the affected
AOA probe if necessary. That NPRM
was prompted by reports of oil residue
between the stator and the rotor parts of
the position resolvers of the AOA vane,
which was a result of incorrect removal
of the machining oil during the
manufacturing process of the AOA
resolvers. This action revises that NPRM
by including an inspection to determine
if certain other AOA probes are
installed, and replacing the affected
probes. We are proposing this AD to
prevent erroneous AOA information and
consequent delayed or non-activation of
the AOA protection systems which,
during flight at a high angle of attack,
could result in reduced control of the
airplane. Since these actions impose an
additional burden over that proposed in
the NPRM, we are reopening the
comment period to allow the public the
chance to comment on these proposed
changes.
DATES: We must receive comments on
this proposed AD by August 27, 2012.
SUMMARY:
E:\FR\FM\11JYP1.SGM
11JYP1
Agencies
[Federal Register Volume 77, Number 133 (Wednesday, July 11, 2012)]
[Proposed Rules]
[Pages 40822-40823]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2012-16857]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2012-0546; Directorate Identifier 2012-NE-15-AD]
RIN 2120-AA64
Airworthiness Directives; Pratt & Whitney Division Turbofan
Engines
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking (NPRM).
-----------------------------------------------------------------------
SUMMARY: We propose to adopt a new airworthiness directive (AD) for all
Pratt & Whitney PW4050, PW4052, PW4056, PW4060, PW4060A, PW4060C,
PW4062, PW4062A, PW4152, PW4156, PW4156A, PW4158, PW4160, PW4460,
PW4462, and PW4650 turbofan engines, including models with any dash
number suffix. This proposed AD was prompted by 16 reports of damaged
or failed 3rd stage low-pressure turbine (LPT) duct segments. This
proposed AD would require removing from service certain part numbers
(P/Ns) of 3rd stage LPT duct segments. We are proposing this AD to
prevent failure of the 3rd stage LPT duct segments, which could lead to
LPT rotor damage, uncontained engine failure, and damage to the
airplane.
DATES: We must receive comments on this proposed AD by September 10,
2012.
ADDRESSES: You may send comments, using the procedures found in 14 CFR
11.43 and 11.45, by any of the following methods:
Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments.
Fax: 202-493-2251.
Mail: U.S. Department of Transportation, Docket
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New
Jersey Avenue SE., Washington, DC 20590.
Hand Delivery: Deliver to Mail address above between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
For service information identified in this proposed AD, contact
Pratt & Whitney, 400 Main St., East Hartford, CT 06108; phone: 860-565-
8770; fax: 860-565-4503. You may review copies of the referenced
service information at the FAA, Engine & Propeller Directorate, 12 New
England Executive Park, Burlington, MA. For information on the
availability of this material at the FAA, call 781-238-7125.
Examining the AD Docket
You may examine the AD docket on the Internet at https://www.regulations.gov; or in person at the Docket Management Facility
between 9 a.m. and 5 p.m., Monday through Friday, except Federal
holidays. The AD docket contains this proposed AD, the regulatory
evaluation, any comments received, and other information. The street
address for the Docket Office (phone: 800-647-5527) is in the ADDRESSES
section. Comments will be available in the AD docket shortly after
receipt.
FOR FURTHER INFORMATION CONTACT: James Gray, Aerospace Engineer, Engine
& Propeller Directorate, FAA, 12 New England Executive Park,
Burlington, MA 01803; phone: 781-238-7742; fax: 781-238-7199; email:
james.e.gray@faa.gov.
SUPPLEMENTARY INFORMATION:
Comments Invited
We invite you to send any written relevant data, views, or
arguments about this proposal. Send your comments to an address listed
under the ADDRESSES section. Include ``Docket No. FAA-2012-0546;
Directorate Identifier 2012-NE-15-AD'' at the beginning of your
comments. We specifically invite comments on the overall regulatory,
economic, environmental, and energy aspects of this proposed AD. We
will consider all comments received by the closing date and may amend
this proposed AD because of those comments.
We will post all comments we receive, without change, to https://www.regulations.gov, including any personal information you provide. We
will also post a report summarizing each substantive verbal contact we
receive about this proposed AD.
Discussion
We received 16 reports of damaged or failed 3rd stage LPT duct
segments that resulted in 5 in-flight shutdowns, two of which were
uncontained engine failures. The 3rd stage LPT duct segment assembly
has seal plates that are attached with rivets. During normal engine
operation, vibration may cause these seal plates to loosen or fall off,
which allows hot gaspath air to enter the cavity behind the duct. This
can cause the 3rd stage LPT duct segment to distort, fall into the
gaspath, and damage the downstream LPT rotor blades. This condition, if
not corrected, could result in failure of the 3rd stage LPT duct
segments, which could lead to LPT rotor damage, uncontained engine
failure, and damage to the airplane.
Relevant Service Information
We reviewed Pratt & Whitney Engine-Duct Segment, Third Stage LPT
Assembly Service Bulletin (SB) No. PW4ENG 72-488, Revision 3, dated
August 13, 2009. The SB lists the part numbers of parts to be removed
and parts to be installed.
FAA's Determination
We are proposing this AD because we evaluated all the relevant
information and determined the unsafe condition described previously is
likely to exist or develop in other products of the same type design.
Proposed AD Requirements
This proposed AD would require removal from service of 3rd stage
LPT duct segments P/Ns 50N095; 50N095-001; 50N235; 50N235-001; 50N494-
01; 50N494-001; 50N495-01; and 50N495-001, at the next piece-part
exposure after the effective date of the proposed AD.
Costs of Compliance
We estimate that this proposed AD would affect 151 engines
installed on airplanes of U.S. registry. We estimate that no additional
labor costs would be incurred to perform the required work as the work
is done when the 3rd stage LPT duct segments are at piece-part
exposure. The average labor rate is $85 per work-hour. Required parts
would cost about $44,441 per engine. Based on these figures, we
estimate the total cost of the AD to U.S. operators to be $6,710,591.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
[[Page 40823]]
We are issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: ``General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
Regulatory Findings
We determined that this proposed AD would not have federalism
implications under Executive Order 13132. This proposed AD would not
have a substantial direct effect on the States, on the relationship
between the national Government and the States, or on the distribution
of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify this proposed
regulation:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Is not a ``significant rule'' under the DOT Regulatory Policies
and Procedures (44 FR 11034, February 26, 1979),
(3) Will not affect intrastate aviation in Alaska, and
(4) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
The Proposed Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
2. The FAA amends Sec. 39.13 by adding the following new
airworthiness directive (AD):
Pratt & Whitney Division: Docket No. FAA-2012-0546; Directorate
Identifier 2012-NE-15-AD.
(a) Comments Due Date
We must receive comments by September 10, 2012.
(b) Affected ADs
None.
(c) Applicability
This AD applies to all Pratt & Whitney PW4050, PW4052, PW4056,
PW4060, PW4060A, PW4060C, PW4062, PW4062A, PW4152, PW4156, PW4156A,
PW4158, PW4160, PW4460, PW4462, and PW4650 turbofan engines,
including models with any dash number suffix, with 3rd stage LPT
duct segments P/N 50N095; 50N095-001; 50N235; 50N235-001; 50N494-01;
50N494-001; 50N495-01; or 50N495-001, installed.
(d) Unsafe Condition
This AD was prompted by 16 reports of damaged or failed 3rd
stage low-pressure turbine (LPT) duct segments. We are issuing this
AD to prevent failure of the 3rd stage LPT duct segments, which
could lead to LPT rotor damage, uncontained engine failure, and
damage to the airplane.
(e) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(f) 3rd Stage LPT Duct Segments Removal From Service
At the next piece-part exposure after the effective date of this
AD, remove from service 3rd stage LPT duct segments, P/Ns 50N095;
50N095-001; 50N235; 50N235-001; 50N494-01; 50N494-001; 50N495-01;
and 50N495-001.
(g) Installation Prohibition
After the effective date of this AD, do not install into any
engine any 3rd stage LPT duct segment, P/N 50N095; 50N095-001;
50N235; 50N235-001; 50N494-01; 50N494-001; 50N495-01; or 50N495-001,
that is at piece-part exposure.
(h) Definition
For the purpose of this AD, piece-part exposure is when the 3rd
stage LPT duct segment is removed from the engine and completely
disassembled.
(i) Alternative Methods of Compliance (AMOCs)
The Manager, Engine Certification Office, may approve AMOCs for
this AD. Use the procedures found in 14 CFR 39.19 to make your
request.
(j) Related Information
(1) Pratt & Whitney Engine-Duct Segment, Third Stage LPT
Assembly Service Bulletin (SB) No. PW4ENG 72-488, Revision 3, dated
August 13, 2009.
(2) For more information about this AD, contact James Gray,
Aerospace Engineer, Engine & Propeller Directorate, FAA, 12 New
England Executive Park, Burlington, MA 01803; phone: 781-238-7742;
fax: 781-238-7199; email: james.e.gray@faa.gov.
(3) For service information identified in this AD, contact Pratt
& Whitney, 400 Main St., East Hartford, CT 06108; phone: 860-565-
8770; fax: 860-565-4503. You may review copies of the service
information at the FAA, Engine & Propeller Directorate, 12 New
England Executive Park, Burlington, MA. For information on the
availability of this material at the FAA, call 781-238-7125.
Issued in Burlington, Massachusetts, on July 2, 2012.
Peter A. White,
Manager, Engine & Propeller Directorate, Aircraft Certification
Service.
[FR Doc. 2012-16857 Filed 7-10-12; 8:45 am]
BILLING CODE 4910-13-P