Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments, 37799-37801 [2012-14863]
Download as PDF
<![CDATA[
Federal Register / Vol. 77, No. 122 / Monday, June 25, 2012 / Rules and Regulations
–301, –302, –303, –321, –322, –323, –341,
–342, and –343 airplanes; and Model A340–
211, –212, –213, –311, –312, and –313
airplanes; certificated in any category; all
manufacturer serial numbers.
(d) Subject
Air Transport Association (ATA) of
America Code 52: Doors.
(e) Reason
This AD was prompted by reports of
sheared fasteners located on the outside skin
of the forward cargo door and cracks on the
frame fork ends, as well as cracks of the aft
cargo door frame 64A. We are issuing this AD
to detect and correct sheared, loose or
missing fasteners on the forward and aft
cargo door frame, which could result in the
loss of structural integrity of the forward and
aft cargo door.
(f) Compliance
You are responsible for having the actions
required by this AD performed within the
compliance times specified, unless the
actions have already been done.
erowe on DSK2VPTVN1PROD with RULES
(g) Forward Cargo Compartment Door
Before the accumulation of 6,000 total
flight cycles since first flight of the airplane
or within 400 flight cycles after the effective
date of this AD, whichever occurs later:
Perform a detailed inspection of the outer
skin rivets at the frame fork ends between
FR20B and FR25 of the forward cargo door
for sheared, loose, and missing rivets, in
accordance with the instructions of Airbus
All Operators Telex (AOT) A330–52A3085,
dated December 20, 2010 (for Model A330–
200 and A330–300 series airplanes); or
Airbus AOT A340–52A4092, dated December
20, 2010 (for Model A340–200 and A340–300
series airplanes). Thereafter repeat the
inspection at intervals not to exceed 800
flight cycles.
(h) Aft Cargo Compartment Door
For all airplanes, except those on which
Airbus Modification 44854 or Modification
44852 has been embodied in production, or
Airbus Service Bulletin A330–52–3044 or
Airbus Service Bulletin A340–52–4054 has
been embodied in service: Before the
accumulation of 4,000 total flight cycles
since first flight of the airplane, or within 400
flight cycles after the effective date of this
AD, whichever occurs later, perform a
detailed inspection of outer skin rivets at the
frame fork ends between FR60 and FR64A of
the aft cargo door for sheared, loose or
missing rivets, in accordance with the
instructions of Airbus AOT A330–52A3084,
dated December 20, 2010 (for Model A330–
200 and A330–300 series airplanes); or
Airbus AOT A340–52A4091, dated December
20, 2010 (for Model A340–200 and A340–300
series airplanes). Thereafter repeat the
inspection at intervals not to exceed 400
flight cycles.
(i) Corrective Action
If any sheared, loose, or missing rivets are
found during any inspection required by
paragraph (g) or (h) of this AD: Before further
flight, repair using a method approved by the
Manager, International Branch, ANM–116,
VerDate Mar<15>2010
17:07 Jun 22, 2012
Jkt 226001
FAA; or European Aviation Safety Agency
(EASA) (or its delegated agent).
(j) Other FAA AD Provisions
The following provisions also apply to this
AD:
(1) Alternative Methods of Compliance
(AMOCs): The Manager, International
Branch, ANM–116, FAA, has the authority to
approve AMOCs for this AD, if requested
using the procedures found in 14 CFR 39.19.
In accordance with 14 CFR 39.19, send your
request to your principal inspector or local
Flight Standards District Office, as
appropriate. If sending information directly
to the International Branch, send it to ATTN:
Vladimir Ulyanov, Aerospace Engineer,
International Branch, ANM–116, Transport
Airplane Directorate, FAA, 1601 Lind
Avenue SW., Renton, Washington 98057–
3356; telephone (425) 227–1138; fax (425)
227–1149. Information may be emailed to:
9-ANM-116-AMOC-REQUESTS@faa.gov.
Before using any approved AMOC, notify
your appropriate principal inspector, or
lacking a principal inspector, the manager of
the local flight standards district office/
certificate holding district office. The AMOC
approval letter must specifically reference
this AD.
(2) Airworthy Product: For any requirement
in this AD to obtain corrective actions from
a manufacturer or other source, use these
actions if they are FAA-approved. Corrective
actions are considered FAA-approved if they
are approved by the State of Design Authority
(or their delegated agent). You are required
to assure the product is airworthy before it
is returned to service.
(k) Related Information
Refer to MCAI European Aviation Safety
Agency Airworthiness Directive 2011–
0007R1, dated February 14, 2011, and the
service information specified in paragraphs
(k)(1) through (k)(4) of this AD, for related
information.
(1) Airbus AOT A330–52A3085, dated
December 20, 2010.
(2) Airbus AOT A340–52A4092, dated
December 20, 2010.
(3) Airbus AOT A330–52A3084, dated
December 20, 2010.
(4) Airbus AOT A340–52A4091, dated
December 20, 2010.
(l) Material Incorporated by Reference
(1) The Director of the Federal Register
approved the incorporation by reference
(IBR) of the following service information
under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use the following service
information to do the actions required by this
AD, as applicable, unless the AD specifies
otherwise.
(i) Airbus AOT A330–52A3085, dated
December 20, 2010. The document number
and date are identified only on the first page
of this document.
(ii) Airbus AOT A340–52A4092, dated
December 20, 2010. The document number
and date are identified only on the first page
of this document.
(iii) Airbus AOT A330–52A3084, dated
December 20, 2010. The document number
and date are identified only on the first page
of this document.
PO 00000
Frm 00049
Fmt 4700
Sfmt 4700
37799
(iv) Airbus AOT A340–52A4091, dated
December 20, 2010. The document number
and date are identified only on the first page
of this document.
(3) For Airbus service information
identified in this AD, contact Airbus SAS—
Airworthiness Office—EAL, 1 Rond Point
Maurice Bellonte, 31707 Blagnac Cedex,
France; telephone +33 5 61 93 36 96; fax +33
5 61 93 45 80; email airworthiness.A330A340@airbus.com; Internet https://
www.airbus.com.
(4) You may review copies of the service
information at the FAA, Transport Airplane
Directorate, 1601 Lind Avenue SW., Renton,
Washington. For information on the
availability of this material at the FAA, call
425–227–1221.
(5) You may also review copies of the
service information that is incorporated by
reference at the National Archives and
Records Administration (NARA). For
information on the availability of this
material at an NARA facility, call 202–741–
6030, or go to https://www.archives.gov/
federal_register/code_of_federal_regulations/
ibr_locations.html.
Issued in Renton, Washington, on June 7,
2012.
Michael Kaszycki,
Acting Manager, Transport Airplane
Directorate, Aircraft Certification Service.
[FR Doc. 2012–14730 Filed 6–22–12; 8:45 am]
BILLING CODE 4910–13–P
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 97
[Docket No. 30847; Amdt. No. 3483]
Standard Instrument Approach
Procedures, and Takeoff Minimums
and Obstacle Departure Procedures;
Miscellaneous Amendments
Federal Aviation
Administration (FAA), DOT.
ACTION: Final rule.
AGENCY:
This rule establishes, amends,
suspends, or revokes Standard
Instrument Approach Procedures
(SIAPs) and associated Takeoff
Minimums and Obstacle Departure
Procedures for operations at certain
airports. These regulatory actions are
needed because of the adoption of new
or revised criteria, or because of changes
occurring in the National Airspace
System, such as the commissioning of
new navigational facilities, adding new
obstacles, or changing air traffic
requirements. These changes are
designed to provide safe and efficient
use of the navigable airspace and to
promote safe flight operations under
instrument flight rules at the affected
airports.
SUMMARY:
E:\FR\FM\25JNR1.SGM
25JNR1
37800
Federal Register / Vol. 77, No. 122 / Monday, June 25, 2012 / Rules and Regulations
This rule is effective June 25,
2012. The compliance date for each
SIAP, associated Takeoff Minimums,
and ODP is specified in the amendatory
provisions.
The incorporation by reference of
certain publications listed in the
regulations is approved by the Director
of the Federal Register as of June 25,
2012.
DATES:
Availability of matter
incorporated by reference in the
amendment is as follows:
For Examination—
1. FAA Rules Docket, FAA
Headquarters Building, 800
Independence Avenue SW.,
Washington, DC 20591;
2. The FAA Regional Office of the
region in which the affected airport is
located;
3. The National Flight Procedures
Office, 6500 South MacArthur Blvd.,
Oklahoma City, OK 73169; or
4. The National Archives and Records
Administration (NARA). For
information on the availability of this
material at NARA, call 202–741–6030,
or go to: https://www.archives.gov/
federal_register/
code_of_federal_regulations/
ibr_locations.html.
Availability—All SIAPs are available
online free of charge. Visit nfdc.faa.gov
to register. Additionally, individual
SIAP and Takeoff Minimums and ODP
copies may be obtained from:
1. FAA Public Inquiry Center (APA–
200), FAA Headquarters Building, 800
Independence Avenue SW.,
Washington, DC 20591; or
2. The FAA Regional Office of the
region in which the affected airport is
located.
ADDRESSES:
erowe on DSK2VPTVN1PROD with RULES
FOR FURTHER INFORMATION CONTACT:
Richard A. Dunham III, Flight Procedure
Standards Branch (AFS–420) Flight
Technologies and Programs Division,
Flight Standards Service, Federal
Aviation Administration, Mike
Monroney Aeronautical Center, 6500
South MacArthur Blvd., Oklahoma City,
OK 73169 (Mail Address: P.O. Box
25082 Oklahoma City, OK 73125)
telephone: (405) 954–4164.
SUPPLEMENTARY INFORMATION: This rule
amends Title 14, Code of Federal
Regulations, Part 97 (14 CFR part 97) by
amending the referenced SIAPs. The
complete regulatory description of each
SIAP is listed on the appropriate FAA
Form 8260, as modified by the National
AIRAC date
26–Jul–12 ....
VerDate Mar<15>2010
State
IA
Flight Data Center (FDC)/Permanent
Notice to Airmen (P–NOTAM), and is
incorporated by reference in the
amendment under 5 U.S.C. 552(a), 1
CFR part 51, and § 97.20 of Title 14 of
the Code of Federal Regulations.
The large number of SIAPs, their
complex nature, and the need for a
special format make their verbatim
publication in the Federal Register
expensive and impractical. Further,
airmen do not use the regulatory text of
the SIAPs, but refer to their graphic
depiction on charts printed by
publishers of aeronautical materials.
Thus, the advantages of incorporation
by reference are realized and
publication of the complete description
of each SIAP contained in FAA form
documents is unnecessary. This
amendment provides the affected CFR
sections and specifies the types of SIAP
and the corresponding effective dates.
This amendment also identifies the
airport and its location, the procedure
and the amendment number.
Conclusion
The Rule
Issued in Washington, DC, on June 8, 2012.
John Duncan,
Deputy Director, Flight Standards Service.
This amendment to 14 CFR part 97 is
effective upon publication of each
separate SIAP as amended in the
transmittal. For safety and timeliness of
change considerations, this amendment
incorporates only specific changes
contained for each SIAP as modified by
FDC/P–NOTAMs.
The SIAPs, as modified by FDC P–
NOTAM, and contained in this
amendment are based on the criteria
contained in the U.S. Standard for
Terminal Instrument Procedures
(TERPS). In developing these changes to
SIAPs, the TERPS criteria were applied
only to specific conditions existing at
the affected airports. All SIAP
amendments in this rule have been
previously issued by the FAA in a FDC
NOTAM as an emergency action of
immediate flight safety relating directly
to published aeronautical charts. The
circumstances which created the need
for all these SIAP amendments requires
making them effective in less than 30
days.
Because of the close and immediate
relationship between these SIAPs and
safety in air commerce, I find that notice
and public procedure before adopting
these SIAPs are impracticable and
contrary to the public interest and,
where applicable, that good cause exists
for making these SIAPs effective in less
than 30 days.
City
Airport
Des Moines .........................
Des Moines Intl ...................
14:43 Jun 22, 2012
Jkt 226001
PO 00000
Frm 00050
Fmt 4700
The FAA has determined that this
regulation only involves an established
body of technical regulations for which
frequent and routine amendments are
necessary to keep them operationally
current. It, therefore—(1) Is not a
‘‘significant regulatory action’’ under
Executive Order 12866; (2) is not a
‘‘significant rule’’ under DOT regulatory
Policies and Procedures (44 FR 11034;
February 26, 1979); and (3) does not
warrant preparation of a regulatory
evaluation as the anticipated impact is
so minimal. For the same reason, the
FAA certifies that this amendment will
not have a significant economic impact
on a substantial number of small entities
under the criteria of the Regulatory
Flexibility Act.
List of Subjects in 14 CFR Part 97
Air traffic control, Airports,
Incorporation by reference, and
Navigation (air).
Adoption of the Amendment
Accordingly, pursuant to the
authority delegated to me, Title 14,
Code of Federal Regulations, Part 97, 14
CFR part 97, is amended by amending
Standard Instrument Approach
Procedures, effective at 0901 UTC on
the dates specified, as follows:
PART 97—STANDARD INSTRUMENT
APPROACH PROCEDURES
1. The authority citation for part 97
continues to read as follows:
■
Authority: 49 U.S.C. 106(g), 40103, 40106,
40113, 40114, 40120, 44502, 44514, 44701,
44719, 44721–44722.
§§ 97.23, 97.25, 97.27, 97.29, 97.31, 97.33,
97.35 [Amended]
2. Part 97 is amended to read as
follows:
By amending: § 97.23 VOR, VOR/
DME, VOR or TACAN, and VOR/DME
or TACAN; § 97.25 LOC, LOC/DME,
LDA, LDA/DME, SDF, SDF/DME;
§ 97.27 NDB, NDB/DME; § 97.29 ILS,
ILS/DME, MLS, MLS/DME, MLS/RNAV;
§ 97.31 RADAR SIAPs; § 97.33 RNAV
SIAPs; and § 97.35 COPTER SIAPs,
Identified as follows:
■
* * * Effective Upon Publication
FDC No.
Sfmt 4700
FDC date
2/6965
E:\FR\FM\25JNR1.SGM
5/8/12
25JNR1
Subject
ILS OR LOC RWY 31, Amdt
23
37801
Federal Register / Vol. 77, No. 122 / Monday, June 25, 2012 / Rules and Regulations
AIRAC date
State
City
Airport
FDC No.
Federal Aviation Administration
and ODP is specified in the amendatory
provisions.
The incorporation by reference of
certain publications listed in the
regulations is approved by the Director
of the Federal Register as of June 25,
2012.
14 CFR Part 97
ADDRESSES:
[FR Doc. 2012–14863 Filed 6–22–12; 8:45 am]
BILLING CODE 4910–13–P
DEPARTMENT OF TRANSPORTATION
[Docket No. 30846; Amdt. No. 3482]
Standard Instrument Approach
Procedures, and Takeoff Minimums
and Obstacle Departure Procedures;
Miscellaneous Amendments
Federal Aviation
Administration (FAA), DOT.
ACTION: Final rule.
AGENCY:
This rule establishes, amends,
suspends, or revokes Standard
Instrument Approach Procedures
(SIAPs) and associated Takeoff
Minimums and Obstacle Departure
Procedures for operations at certain
airports. These regulatory actions are
needed because of the adoption of new
or revised criteria, or because of changes
occurring in the National Airspace
System, such as the commissioning of
new navigational facilities, adding new
obstacles, or changing air traffic
requirements. These changes are
designed to provide safe and efficient
use of the navigable airspace and to
promote safe flight operations under
instrument flight rules at the affected
airports.
erowe on DSK2VPTVN1PROD with RULES
SUMMARY:
This rule is effective June 25,
2012. The compliance date for each
SIAP, associated Takeoff Minimums,
DATES:
VerDate Mar<15>2010
14:43 Jun 22, 2012
Jkt 226001
Availability of matters
incorporated by reference in the
amendment is as follows:
For Examination—
1. FAA Rules Docket, FAA
Headquarters Building, 800
Independence Avenue SW.,
Washington, DC 20591;
2. The FAA Regional Office of the
region in which the affected airport is
located;
3. The National Flight Procedures
Office, 6500 South MacArthur Blvd.,
Oklahoma City, OK 73169 or
4. The National Archives and Records
Administration (NARA). For
information on the availability of this
material at NARA, call 202–741–6030,
or go to: https://www.archives.gov/
federal_register/code_of_federal_
regulations/ibr_locations.html.
Availability—All SIAPs and Takeoff
Minimums and ODPs are available
online free of charge. Visit https://www.
nfdc.faa.gov to register. Additionally,
individual SIAP and Takeoff Minimums
and ODP copies may be obtained from:
1. FAA Public Inquiry Center (APA–
200), FAA Headquarters Building, 800
Independence Avenue SW.,
Washington, DC 20591; or
2. The FAA Regional Office of the
region in which the affected airport is
located.
PO 00000
Frm 00051
Fmt 4700
Sfmt 4700
FDC date
Subject
FOR FURTHER INFORMATION CONTACT:
Richard A. Dunham III, Flight Procedure
Standards Branch (AFS–420), Flight
Technologies and Programs Divisions,
Flight Standards Service, Federal
Aviation Administration, Mike
Monroney Aeronautical Center, 6500
South MacArthur Blvd. Oklahoma City,
OK. 73169 (Mail Address: P.O. Box
25082, Oklahoma City, OK 73125)
Telephone: (405) 954–4164.
SUPPLEMENTARY INFORMATION: This rule
amends Title 14 of the Code of Federal
Regulations, Part 97 (14 CFR part 97), by
establishing, amending, suspending, or
revoking SIAPS, Takeoff Minimums
and/or ODPS. The complete regulators
description of each SIAP and its
associated Takeoff Minimums or ODP
for an identified airport is listed on FAA
form documents which are incorporated
by reference in this amendment under 5
U.S.C. 552(a), 1 CFR part 51, and 14
CFR 97.20. The applicable FAA Forms
are FAA Forms 8260–3, 8260–4, 8260–
5, 8260–15A, and 8260–15B when
required by an entry on 8260–15A.
The large number of SIAPs, Takeoff
Minimums and ODPs, in addition to
their complex nature and the need for
a special format make publication in the
Federal Register expensive and
impractical. Furthermore, airmen do not
use the regulatory text of the SIAPs,
Takeoff Minimums or ODPs, but instead
refer to their depiction on charts printed
by publishers of aeronautical materials.
The advantages of incorporation by
reference are realized and publication of
the complete description of each SIAP,
Takeoff Minimums and ODP listed on
FAA forms is unnecessary. This
E:\FR\FM\25JNR1.SGM
25JNR1
]]>Agencies
[Federal Register Volume 77, Number 122 (Monday, June 25, 2012)]
[Rules and Regulations]
[Pages 37799-37801]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2012-14863]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 97
[Docket No. 30847; Amdt. No. 3483]
Standard Instrument Approach Procedures, and Takeoff Minimums and
Obstacle Departure Procedures; Miscellaneous Amendments
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: This rule establishes, amends, suspends, or revokes Standard
Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums
and Obstacle Departure Procedures for operations at certain airports.
These regulatory actions are needed because of the adoption of new or
revised criteria, or because of changes occurring in the National
Airspace System, such as the commissioning of new navigational
facilities, adding new obstacles, or changing air traffic requirements.
These changes are designed to provide safe and efficient use of the
navigable airspace and to promote safe flight operations under
instrument flight rules at the affected airports.
[[Page 37800]]
DATES: This rule is effective June 25, 2012. The compliance date for
each SIAP, associated Takeoff Minimums, and ODP is specified in the
amendatory provisions.
The incorporation by reference of certain publications listed in
the regulations is approved by the Director of the Federal Register as
of June 25, 2012.
ADDRESSES: Availability of matter incorporated by reference in the
amendment is as follows:
For Examination--
1. FAA Rules Docket, FAA Headquarters Building, 800 Independence
Avenue SW., Washington, DC 20591;
2. The FAA Regional Office of the region in which the affected
airport is located;
3. The National Flight Procedures Office, 6500 South MacArthur
Blvd., Oklahoma City, OK 73169; or
4. The National Archives and Records Administration (NARA). For
information on the availability of this material at NARA, call 202-741-
6030, or go to: https://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
Availability_All SIAPs are available online free of charge. Visit
nfdc.faa.gov to register. Additionally, individual SIAP and Takeoff
Minimums and ODP copies may be obtained from:
1. FAA Public Inquiry Center (APA-200), FAA Headquarters Building,
800 Independence Avenue SW., Washington, DC 20591; or
2. The FAA Regional Office of the region in which the affected
airport is located.
FOR FURTHER INFORMATION CONTACT: Richard A. Dunham III, Flight
Procedure Standards Branch (AFS-420) Flight Technologies and Programs
Division, Flight Standards Service, Federal Aviation Administration,
Mike Monroney Aeronautical Center, 6500 South MacArthur Blvd., Oklahoma
City, OK 73169 (Mail Address: P.O. Box 25082 Oklahoma City, OK 73125)
telephone: (405) 954-4164.
SUPPLEMENTARY INFORMATION: This rule amends Title 14, Code of Federal
Regulations, Part 97 (14 CFR part 97) by amending the referenced SIAPs.
The complete regulatory description of each SIAP is listed on the
appropriate FAA Form 8260, as modified by the National Flight Data
Center (FDC)/Permanent Notice to Airmen (P-NOTAM), and is incorporated
by reference in the amendment under 5 U.S.C. 552(a), 1 CFR part 51, and
Sec. 97.20 of Title 14 of the Code of Federal Regulations.
The large number of SIAPs, their complex nature, and the need for a
special format make their verbatim publication in the Federal Register
expensive and impractical. Further, airmen do not use the regulatory
text of the SIAPs, but refer to their graphic depiction on charts
printed by publishers of aeronautical materials. Thus, the advantages
of incorporation by reference are realized and publication of the
complete description of each SIAP contained in FAA form documents is
unnecessary. This amendment provides the affected CFR sections and
specifies the types of SIAP and the corresponding effective dates. This
amendment also identifies the airport and its location, the procedure
and the amendment number.
The Rule
This amendment to 14 CFR part 97 is effective upon publication of
each separate SIAP as amended in the transmittal. For safety and
timeliness of change considerations, this amendment incorporates only
specific changes contained for each SIAP as modified by FDC/P-NOTAMs.
The SIAPs, as modified by FDC P-NOTAM, and contained in this
amendment are based on the criteria contained in the U.S. Standard for
Terminal Instrument Procedures (TERPS). In developing these changes to
SIAPs, the TERPS criteria were applied only to specific conditions
existing at the affected airports. All SIAP amendments in this rule
have been previously issued by the FAA in a FDC NOTAM as an emergency
action of immediate flight safety relating directly to published
aeronautical charts. The circumstances which created the need for all
these SIAP amendments requires making them effective in less than 30
days.
Because of the close and immediate relationship between these SIAPs
and safety in air commerce, I find that notice and public procedure
before adopting these SIAPs are impracticable and contrary to the
public interest and, where applicable, that good cause exists for
making these SIAPs effective in less than 30 days.
Conclusion
The FAA has determined that this regulation only involves an
established body of technical regulations for which frequent and
routine amendments are necessary to keep them operationally current.
It, therefore--(1) Is not a ``significant regulatory action'' under
Executive Order 12866; (2) is not a ``significant rule'' under DOT
regulatory Policies and Procedures (44 FR 11034; February 26, 1979);
and (3) does not warrant preparation of a regulatory evaluation as the
anticipated impact is so minimal. For the same reason, the FAA
certifies that this amendment will not have a significant economic
impact on a substantial number of small entities under the criteria of
the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 97
Air traffic control, Airports, Incorporation by reference, and
Navigation (air).
Issued in Washington, DC, on June 8, 2012.
John Duncan,
Deputy Director, Flight Standards Service.
Adoption of the Amendment
Accordingly, pursuant to the authority delegated to me, Title 14,
Code of Federal Regulations, Part 97, 14 CFR part 97, is amended by
amending Standard Instrument Approach Procedures, effective at 0901 UTC
on the dates specified, as follows:
PART 97--STANDARD INSTRUMENT APPROACH PROCEDURES
0
1. The authority citation for part 97 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40103, 40106, 40113, 40114, 40120,
44502, 44514, 44701, 44719, 44721-44722.
Sec. Sec. 97.23, 97.25, 97.27, 97.29, 97.31, 97.33, 97.35 [Amended]
0
2. Part 97 is amended to read as follows:
By amending: Sec. 97.23 VOR, VOR/DME, VOR or TACAN, and VOR/DME or
TACAN; Sec. 97.25 LOC, LOC/DME, LDA, LDA/DME, SDF, SDF/DME; Sec.
97.27 NDB, NDB/DME; Sec. 97.29 ILS, ILS/DME, MLS, MLS/DME, MLS/RNAV;
Sec. 97.31 RADAR SIAPs; Sec. 97.33 RNAV SIAPs; and Sec. 97.35 COPTER
SIAPs, Identified as follows:
* * * Effective Upon Publication
----------------------------------------------------------------------------------------------------------------
AIRAC date State City Airport FDC No. FDC date Subject
----------------------------------------------------------------------------------------------------------------
26-Jul-12......... IA Des Moines....... Des Moines Intl.. 2/6965 5/8/12 ILS OR LOC RWY
31, Amdt 23
[[Page 37801]]
........... ...........
----------------------------------------------------------------------------------------------------------------
........... ...........
----------------------------------------------------------------------------------------------------------------
........... ...........
----------------------------------------------------------------------------------------------------------------
........... ...........
----------------------------------------------------------------------------------------------------------------
........... ...........
----------------------------------------------------------------------------------------------------------------
........... ...........
----------------------------------------------------------------------------------------------------------------
........... ...........
----------------------------------------------------------------------------------------------------------------
........... ...........
----------------------------------------------------------------------------------------------------------------
........... ...........
----------------------------------------------------------------------------------------------------------------
........... ...........
----------------------------------------------------------------------------------------------------------------
........... ...........
----------------------------------------------------------------------------------------------------------------
........... ...........
----------------------------------------------------------------------------------------------------------------
........... ...........
----------------------------------------------------------------------------------------------------------------
[FR Doc. 2012-14863 Filed 6-22-12; 8:45 am]
BILLING CODE 4910-13-P
