Delegation of National Emission Standards for Hazardous Air Pollutants for Source Categories; Nevada, 11390-11394 [2012-4563]
Download as PDF
<![CDATA[
11390
Federal Register / Vol. 77, No. 38 / Monday, February 27, 2012 / Rules and Regulations
Dated: February 8, 2012.
G.J. Depinet,
Captain, U.S. Coast Guard, Captain of the
Port Miami.
[FR Doc. 2012–4452 Filed 2–24–12; 8:45 am]
BILLING CODE 9110–04–P
ENVIRONMENTAL PROTECTION
AGENCY
40 CFR Part 63
[EPA–R09–OAR–2012–0117; FRL–9635–7]
Delegation of National Emission
Standards for Hazardous Air Pollutants
for Source Categories; Nevada
Environmental Protection
Agency (EPA).
ACTION: Direct final rule.
AGENCY:
EPA is amending certain
regulations to reflect the current
delegation status of national emission
standards for hazardous air pollutants
(NESHAP) in Nevada. Several NESHAP
were delegated to the Nevada Division
of Environmental Protection on October
6, 2011. The purpose of this action is to
update the listing in the Code of Federal
Regulations.
DATES: This rule is effective on April 27,
2012 without further notice, unless EPA
receives adverse comments by March
28, 2012. If we receive such comments,
we will publish a timely withdrawal in
the Federal Register to notify the public
that this direct final rule will not take
effect.
ADDRESSES: Submit comments,
identified by docket number EPA–R09–
OAR–2012–0117, by one of the
following methods:
1. Federal eRulemaking Portal:
www.regulations.gov. Follow the on-line
instructions.
2. Email: steckel.andrew@epa.gov.
3. Mail or delivery: Andrew Steckel
(AIR–4), U.S. Environmental Protection
Agency Region IX, 75 Hawthorne Street,
San Francisco, CA 94105–3901.
Instructions: All comments will be
included in the public docket without
change and may be made available
online at www.regulations.gov,
including any personal information
provided, unless the comment includes
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute. Information that
you consider CBI or otherwise protected
should be clearly identified as such and
should not be submitted through
www.regulations.gov or email.
www.regulations.gov is an ‘‘anonymous
access’’ system, and EPA will not know
your identity or contact information
wreier-aviles on DSK5TPTVN1PROD with RULES
SUMMARY:
VerDate Mar<15>2010
14:41 Feb 24, 2012
Jkt 226001
unless you provide it in the body of
your comment. If you send email
directly to EPA, your email address will
be automatically captured and included
as part of the public comment. If EPA
cannot read your comment due to
technical difficulties and cannot contact
you for clarification, EPA may not be
able to consider your comment.
Electronic files should avoid the use of
special characters, any form of
encryption, and be free of any defects or
viruses.
Docket: The index to the docket for
this action is available electronically at
www.regulations.gov and in hard copy
at EPA Region IX, 75 Hawthorne Street,
San Francisco, California. While all
documents in the docket are listed in
the index, some information may be
publicly available only at the hard copy
location (e.g., copyrighted material), and
some may not be publicly available in
either location (e.g., CBI). To inspect the
hard copy materials, please schedule an
appointment during normal business
hours with the contact listed in the FOR
FURTHER INFORMATION CONTACT section.
FOR FURTHER INFORMATION CONTACT:
Rynda Kay, EPA Region IX, (415) 947–
4118, kay.rynda@epa.gov.
SUPPLEMENTARY INFORMATION:
Throughout this document, ‘‘we,’’ ‘‘us’’
and ‘‘our’’ refer to EPA.
Table of Contents
I. Background
A. Delegation of NESHAP
B. NDEP Delegations
II. EPA Action
III. Statutory and Executive Order Reviews
I. Background
A. Delegation of NESHAP
Section 112(l) of the Clean Air Act, as
amended in 1990 (CAA), authorizes
EPA to delegate to State or local air
pollution control agencies the authority
to implement and enforce the standards
set out in the Code of Federal
Regulations, Title 40 (40 CFR), part 63,
National Emission Standards for
Hazardous Air Pollutants for Source
Categories. On November 26, 1993, EPA
promulgated regulations, codified at 40
CFR part 63, Subpart E (hereinafter
referred to as ‘‘Subpart E’’), establishing
procedures for EPA’s approval of State
rules or programs under section 112(l)
(see 58 FR 62262). Subpart E was later
amended on September 14, 2000 (see 65
FR 55810).
Any request for approval under CAA
section 112(l) must meet the approval
criteria in 112(l)(5) and Subpart E. To
streamline the approval process for
future applications, a State or local
agency may submit a one-time
PO 00000
Frm 00008
Fmt 4700
Sfmt 4700
demonstration that it has adequate
authorities and resources to implement
and enforce any CAA section 112
standards. If such demonstration is
approved, then the State or local agency
would no longer need to resubmit a
demonstration of these same authorities
and resources for every subsequent
request for delegation of CAA section
112 standards. However, EPA maintains
the authority to withdraw its approval if
the State does not adequately
implement or enforce an approved rule
or program.
B. NDEP Delegations
On May 27, 1998, EPA published a
direct final action delegating to the
NDEP several NESHAP and approving
NDEP’s delegation mechanism for future
standards (see 63 FR 28906). That action
explained the procedure for EPA to
grant future delegations to NDEP by
letter, with periodic Federal Register
listings of standards that have been
delegated. On August 19, 2011, NDEP
requested delegation of the following
NESHAP contained in 40 CFR part 63:
• The amendments to Subpart LLL—
NESHAP from the Portland Cement
Manufacturing Industry, as set forth in
75 FR 54970 (September 9, 2010).
• The amendments to Subpart
ZZZZ—NESHAP for Stationary
Reciprocating Internal Combustion
Engines, as set forth in 75 FR 51570
(August 20, 2010) and 76 FR 12863
(March 9, 2011).
• Subpart DDDDD—NESHAP for
Industrial, Commercial, and
Institutional Boilers and Process
Heaters.
• Subpart BBBBBB—NESHAP for
Source Category: Gasoline Distribution
Bulk Terminals, Bulk Plants, and
Pipeline Facilities.
• Subpart CCCCCC—NESHAP for
Source Category: Gasoline Dispensing
Facilities.
• Subpart HHHHHH—NESHAP:
Paint Stripping and Miscellaneous
Surface Coating Operations at Area
Sources.
• Subpart JJJJJJ—NESHAP for
Industrial, Commercial, and
Institutional Boilers Area Sources.
• Subpart VVVVVV—NESHAP for
Chemical Manufacturing Area Sources.
• Subpart WWWWWW—NESHAP:
Area Source Standards for Plating and
Polishing Operations.
• Subpart XXXXXX—NESHAP Area
Source Standards for Nine Metal
Fabrication and Finishing Source
Categories.
• Subpart ZZZZZZ—NESHAP: Area
Source Standards for Aluminum,
Copper, and Other Nonferrous
Foundries.
E:\FR\FM\27FER1.SGM
27FER1
11391
Federal Register / Vol. 77, No. 38 / Monday, February 27, 2012 / Rules and Regulations
• Subpart AAAAAAA—NESHAP for
Area Sources: Asphalt Processing and
Asphalt Roofing Manufacturing.
• Subpart BBBBBBB—NESHAP for
Area Sources: Chemical Preparations
Industry.
• Subpart CCCCCCC—NESHAP for
Area Sources: Paints and Allied
Products Manufacturing.
• Subpart EEEEEEE—NESHAP: Gold
Mine Ore Processing and Production
Area Source Category.
On October 6, 2011, EPA granted
delegation to NDEP for these NESHAP,
along with any amendments made to
previously-delegated NESHAP as of July
1, 2010. Today’s action is serving to
notify the public of the October 6, 2011,
delegation and to codify these
delegations into the Code of Federal
Regulations.
II. EPA Action
Today’s document serves to notify the
public of the delegation of NESHAP to
NDEP on October 6, 2011. Today’s
action will codify these delegations into
the CFR.
wreier-aviles on DSK5TPTVN1PROD with RULES
III. Statutory and Executive Order
Reviews
Under the CAA, the Administrator is
required to approve delegation requests
that comply with the provisions of the
CAA and applicable Federal regulations.
42 U.S.C. 7412(l); 40 CFR 63.91(b).
Thus, in reviewing delegation
submissions, EPA’s role is to approve
State choices, provided that they meet
the criteria of the CAA. Accordingly,
this action merely approves State law as
meeting Federal requirements and does
not impose additional requirements
beyond those imposed by State law. For
that reason, this action:
• Is not a ‘‘significant regulatory
action’’ subject to review by the Office
of Management and Budget under
Executive Order 12866 (58 FR 51735,
October 4, 1993);
• Does not impose an information
collection burden under the provisions
of the Paperwork Reduction Act (44
U.S.C. 3501 et seq.);
• Is certified as not having a
significant economic impact on a
substantial number of small entities
under the Regulatory Flexibility Act
(5 U.S.C. 601 et seq.);
• Does not contain any unfunded
mandate or significantly or uniquely
affect small governments, as described
in the Unfunded Mandates Reform Act
of 1995 (Pub. L. 104–4);
• Does not have Federalism
implications as specified in Executive
Order 13132 (64 FR 43255, August 10,
1999);
• Is not an economically significant
regulatory action based on health or
safety risks subject to Executive Order
13045 (62 FR 19885, April 23, 1997);
• Is not a significant regulatory action
subject to Executive Order 13211 (66 FR
28355, May 22, 2001);
• Is not subject to requirements of
Section 12(d) of the National
Technology Transfer and Advancement
Act of 1995 (15 U.S.C. 272 note) because
application of those requirements would
be inconsistent with the CAA; and
• Does not provide EPA with the
discretionary authority to address
disproportionate human health or
environmental effects with practical,
appropriate, and legally permissible
methods under Executive Order 12898
(59 FR 7629, February 16, 1994).
In addition, this rule does not have
tribal implications as specified by
Executive Order 13175 (65 FR 67249,
November 9, 2000), because the
delegations are not approved to apply in
Indian country located in the State, and
EPA notes that it will not impose
substantial direct costs on tribal
governments or preempt tribal law.
The Congressional Review Act, 5
U.S.C. 801 et seq., as added by the Small
Business Regulatory Enforcement
Fairness Act of 1996, generally provides
that before a rule may take effect, the
agency promulgating the rule must
submit a rule report, which includes a
copy of the rule, to each House of the
Congress and to the Comptroller General
of the United States. EPA will submit a
report containing this action and other
required information to the U.S. Senate,
the U.S. House of Representatives, and
the Comptroller General of the United
States prior to publication of the rule in
the Federal Register. A major rule
cannot take effect until 60 days after it
is published in the Federal Register.
This action is not a ‘‘major rule’’ as
defined by 5 U.S.C. 804(2).
Under section 307(b)(1) of the CAA,
petitions for judicial review of this
action must be filed in the United States
Court of Appeals for the appropriate
circuit by April 27, 2012. Filing a
petition for reconsideration by the
Administrator of this final rule does not
affect the finality of this action for the
purposes of judicial review nor does it
extend the time within which a petition
for judicial review may be filed, and
shall not postpone the effectiveness of
such rule or action. Parties with
objections to this direct final rule are
encouraged to file a comment in
response to the parallel notice of
proposed rulemaking for this action
published in the Proposed Rules section
of today’s Federal Register, rather than
file an immediate petition for judicial
review of this direct final rule, so that
EPA can withdraw this direct final rule
and address the comment in the
proposed rulemaking. This action may
not be challenged later in proceedings to
enforce its requirements (see section
307(b)(2)).
Authority: This action is issued under the
authority of Section 112 of the Clean Air Act,
as amended, 42 U.S.C. Section 7412.
List of Subjects in 40 CFR Part 63
Environmental protection,
Administrative practice and procedure,
Air pollution control, Hazardous
substances, Intergovernmental relations,
Reporting and recordkeeping
requirements.
Dated: February 13, 2012.
Deborah Jordan,
Director, Air Division, Region IX.
Title 40, chapter I, part 63 of the Code
of Federal Regulations is amended as
follows:
PART 63—[AMENDED]
1. The authority citation for Part 63
continues to read as follows:
■
Authority: 42 U.S.C. 7401, et seq.
Subpart E—Approval of State
Programs and Delegation of Federal
Authorities
2. Section 63.99 is amended by
revising the table in paragraph (a)(29)(i)
to read as follows:
■
§ 63.99
Delegated Federal authorities.
(a) * * *
(29) * * *
(i) * * *
DELEGATION STATUS FOR PART 63 STANDARDS—NEVADA
Subpart
Description
NDEP 1
Washoe 2
Clark 3
A ........................
F ........................
General Provisions .......................................................................................
Synthetic Organic Chemical Manufacturing Industry ...................................
X
X
X
........................
X
X
VerDate Mar<15>2010
14:41 Feb 24, 2012
Jkt 226001
PO 00000
Frm 00009
Fmt 4700
Sfmt 4700
E:\FR\FM\27FER1.SGM
27FER1
11392
Federal Register / Vol. 77, No. 38 / Monday, February 27, 2012 / Rules and Regulations
DELEGATION STATUS FOR PART 63 STANDARDS—NEVADA—Continued
Subpart
Description
NDEP 1
Washoe 2
Clark 3
G .......................
Synthetic Organic Chemical Manufacturing Industry: Process Vents, Storage Vessels, Transfer Operations, and Wastewater.
Organic Hazardous Air Pollutants: Equipment Leaks ..................................
Organic Hazardous Air Pollutants: Certain Processes Subject to the Negotiated Regulation for Equipment Leaks.
Polyvinyl Chloride and Copolymers Production ...........................................
Coke Oven Batteries ....................................................................................
Perchloroethylene Dry Cleaning ..................................................................
Hard and Decorative Chromium Electroplating and Chromium Anodizing
Tanks.
Ethylene Oxide Sterilization Facilities ..........................................................
Industrial Process Cooling Towers ...............................................................
Gasoline Distribution Facilities .....................................................................
Pulp and Paper ............................................................................................
Halogenated Solvent Cleaning .....................................................................
Group I Polymers and Resins ......................................................................
Epoxy Resins Production and Non-Nylon Polyamides Production ..............
Secondary Lead Smelting ............................................................................
Marine Tank Vessel Loading Operations .....................................................
Phosphoric Acid Manufacturing Plants ........................................................
Phosphate Fertilizers Production Plants ......................................................
Petroleum Refineries ....................................................................................
Off-Site Waste and Recovery Operations ....................................................
Magnetic Tape Manufacturing Operations ...................................................
Aerospace Manufacturing and Rework Facilities .........................................
Oil and Natural Gas Production Facilities ....................................................
Shipbuilding and Ship Repair (Surface Coating) .........................................
Wood Furniture Manufacturing Operations ..................................................
Printing and Publishing Industry ..................................................................
Primary Aluminum Reduction Plants ............................................................
Chemical Recovery Combustion Sources at Kraft, Soda, Sulfite, and
Stand-Alone Semichemical Pulp Mills.
Tanks—Level 1 ............................................................................................
Containers ....................................................................................................
Surface Impoundments ................................................................................
Individual Drain Systems ..............................................................................
Closed Vent Systems, Control Devices, Recovery Devices and Routing to
a Fuel Gas System or a Process.
Equipment Leaks—Control Level 1 .............................................................
Equipment Leaks—Control Level 2 .............................................................
Oil-Water Separators and Organic-Water Separators .................................
Storage Vessels (Tanks)—Control Level 2 ..................................................
Ethylene Manufacturing Process Units: Heat Exchange Systems and
Waste Operations.
Generic MACT Standards ............................................................................
Steel Pickling ................................................................................................
Mineral Wool Production ..............................................................................
Hazardous Waste Combustors ....................................................................
Pharmaceuticals Production .........................................................................
Natural Gas Transmission and Storage Facilities ........................................
Flexible Polyurethane Foam Production ......................................................
Group IV Polymers and Resins ....................................................................
Portland Cement Manufacturing Industry ....................................................
Pesticide Active Ingredient Production ........................................................
Wool Fiberglass Manufacturing ....................................................................
Manufacture of Amino/Phenolic Resins .......................................................
Polyether Polyols Production .......................................................................
Primary Copper Smelting .............................................................................
Secondary Aluminum Production .................................................................
Primary Lead Smelting .................................................................................
Petroleum Refineries: Catalytic Cracking, Catalytic Reforming, and Sulfur
Recovery Units.
Publicly Owned Treatment Works ................................................................
Ferroalloys Production .................................................................................
Municipal Solid Waste Landfills ...................................................................
Manufacturing of Nutritional Yeast ...............................................................
Plywood and Composite Wood Products .....................................................
Organic Liquids Distribution (non-gasoline) .................................................
Miscellaneous Organic Chemical Manufacturing .........................................
Solvent Extraction for Vegetable Oil Production ..........................................
Wet-Formed Fiberglass Mat Production ......................................................
Surface Coating of Automobiles and Light-Duty Trucks ..............................
X
........................
X
X
X
........................
........................
X
X
X
X
X
X
........................
........................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
........................
X
........................
X
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
X
........................
........................
X
X
X
X
X
X
X
X
........................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
........................
........................
........................
........................
........................
X
X
X
X
X
X
X
X
X
X
........................
........................
........................
........................
........................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
........................
........................
........................
........................
X
........................
........................
........................
........................
X
X
X
X
X
X
X
X
X
X
H .......................
I .........................
J ........................
L ........................
M .......................
N .......................
O .......................
Q .......................
R .......................
S ........................
T ........................
U .......................
W .......................
X ........................
Y ........................
AA .....................
BB .....................
CC .....................
DD .....................
EE .....................
GG ....................
HH .....................
II ........................
JJ ......................
KK .....................
LL ......................
MM ....................
OO ....................
PP .....................
QQ ....................
RR .....................
SS .....................
TT ......................
UU .....................
VV .....................
WW ...................
XX .....................
wreier-aviles on DSK5TPTVN1PROD with RULES
YY .....................
CCC ..................
DDD ..................
EEE ...................
GGG ..................
HHH ..................
III .......................
JJJ .....................
LLL ....................
MMM .................
NNN ..................
OOO ..................
PPP ...................
QQQ ..................
RRR ..................
TTT ...................
UUU ..................
VVV ...................
XXX ...................
AAAA ................
CCCC ................
DDDD ................
EEEE ................
FFFF .................
GGGG ...............
HHHH ................
IIII ......................
VerDate Mar<15>2010
14:41 Feb 24, 2012
Jkt 226001
PO 00000
Frm 00010
Fmt 4700
Sfmt 4700
E:\FR\FM\27FER1.SGM
27FER1
Federal Register / Vol. 77, No. 38 / Monday, February 27, 2012 / Rules and Regulations
11393
DELEGATION STATUS FOR PART 63 STANDARDS—NEVADA—Continued
Subpart
Description
NDEP 1
Washoe 2
Clark 3
JJJJ ...................
KKKK ................
MMMM ..............
NNNN ................
OOOO ...............
PPPP ................
QQQQ ...............
RRRR ................
SSSS ................
TTTT .................
UUUU ................
VVVV ................
WWWW ............
XXXX ................
YYYY ................
ZZZZ .................
AAAAA ..............
BBBBB ..............
CCCCC .............
DDDDD .............
EEEEE ..............
FFFFF ...............
GGGGG ............
HHHHH .............
IIIII .....................
JJJJJ .................
KKKKK ..............
LLLLL ................
MMMMM ...........
NNNNN .............
PPPPP ..............
QQQQQ ............
RRRRR .............
SSSSS ..............
TTTTT ...............
WWWWW .........
YYYYY ..............
ZZZZZ ...............
BBBBBB ............
CCCCCC ..........
DDDDDD ..........
EEEEEE ............
FFFFFF .............
GGGGGG .........
HHHHHH ..........
Paper and Other Web Coating ....................................................................
Surface Coating of Metal Cans ....................................................................
Miscellaneous Metal Parts and Products .....................................................
Large Appliances ..........................................................................................
Printing, Coating, and Dyeing of Fabrics and Other Textiles ......................
Surface Coating of Plastic Parts and Products ............................................
Wood Building Products ...............................................................................
Surface Coating of Metal Furniture ..............................................................
Surface Coating of Metal Coil ......................................................................
Leather Finishing Operations .......................................................................
Cellulose Products Manufacturing ...............................................................
Boat Manufacturing ......................................................................................
Reinforced Plastics Composites Production ................................................
Tire Manufacturing .......................................................................................
Stationary Combustion Turbines ..................................................................
Stationary Reciprocating Internal Combustion Engines ...............................
Lime Manufacturing Plants ...........................................................................
Semiconductor Manufacturing ......................................................................
Coke Oven: Pushing, Quenching and Battery Stacks .................................
Industrial, Commercial, and Institutional Boiler and Process Heaters .........
Iron and Steel Foundries ..............................................................................
Integrated Iron and Steel .............................................................................
Site Remediation ..........................................................................................
Miscellaneous Coating Manufacturing .........................................................
Mercury Emissions from Mercury Cell Chlor-Alkali Plants ..........................
Brick and Structural Clay Products Manufacturing ......................................
Clay Ceramics Manufacturing ......................................................................
Asphalt Roofing and Processing ..................................................................
Flexible Polyurethane Foam Fabrication Operation .....................................
Hydrochloric Acid Production .......................................................................
Engine Test Cells/Stands .............................................................................
Friction Products Manufacturing ..................................................................
Taconite Iron Ore Processing ......................................................................
Refractory Products Manufacturing ..............................................................
Primary Magnesium Refining .......................................................................
Hospital Ethylene Oxide Sterilizers ..............................................................
Electric Arc Furnace Steelmaking Facilities (area sources) ........................
Iron and Steel Foundries Area Sources .......................................................
Gasoline Distribution Bulk Terminals, Bulk Plants and Pipeline Facilities ..
Gasoline Dispensing Facilities .....................................................................
Polyvinyl Chloride and Copolymers Production Area Sources ....................
Primary Copper Smelting Area Sources ......................................................
Secondary Copper Smelting Area Sources .................................................
Primary Nonferrous Metals Area Sources—Zinc, Cadmium, and Beryllium
Paint Stripping and Miscellaneous Surface Coating Operations at Area
Sources.
Industrial, Commercial, and Institutional Boilers and Process Heaters—
Area Sources.
Acrylic and Modacrylic Fibers Production Area Sources .............................
Carbon Black Production Area Sources ......................................................
Chemical Manufacturing Area Sources: Chromium Compounds ................
Flexible Polyurethane Foam Production and Fabrication Area Sources .....
Lead Acid Battery Manufacturing Area Sources ..........................................
Wood Preserving Area Sources ...................................................................
Clay Ceramics Manufacturing Area Sources ...............................................
Glass Manufacturing Area Sources .............................................................
Secondary Nonferrous Metals Processing Area Sources ............................
Chemical Manufacturing Industry—Area Sources .......................................
Area Source Standards for Plating and Polishing Operations .....................
Area Source Standards for Nine Metal Fabrication and Finishing Source
Categories.
Area Sources: Ferroalloys Production Facilities ..........................................
Area Source Standards for Aluminum, Copper, and Other Nonferrous
Foundries.
Asphalt Processing and Asphalt Roofing Manufacturing—Area Sources ...
Chemical Preparations Industry—Area Sources ..........................................
Paint and Allied Products Manufacturing—Area Sources ...........................
Gold Mine Ore Processing and Production—Area Sources ........................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
........................
X
X
X
X
X
X
X
........................
X
........................
X
X
X
X
X
X
X
X
X
X
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
X
........................
........................
X
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
X
........................
........................
X
X
........................
........................
........................
........................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
........................
........................
X
X
X
X
X
X
X
X
X
X
X
X
........................
........................
........................
X
........................
........................
........................
........................
........................
........................
X
X
X
X
X
X
X
X
X
X
X
........................
X
X
........................
X
........................
........................
X
X
X
X
X
X
........................
........................
........................
........................
........................
........................
........................
........................
JJJJJJ ...............
wreier-aviles on DSK5TPTVN1PROD with RULES
LLLLLL ..............
MMMMMM ........
NNNNNN ..........
OOOOOO .........
PPPPPP ............
QQQQQQ .........
RRRRRR ..........
SSSSSS ............
TTTTTT .............
VVVVVV ............
WWWWWW ......
XXXXXX ............
YYYYYY ............
ZZZZZZ .............
AAAAAAA .........
BBBBBBB .........
CCCCCCC ........
EEEEEEE .........
1
2
3
Nevada Division of Environmental Protection.
Washoe County Air Quality Management Division.
Clark County Department of Air Quality Management.
VerDate Mar<15>2010
14:41 Feb 24, 2012
Jkt 226001
PO 00000
Frm 00011
Fmt 4700
Sfmt 4700
E:\FR\FM\27FER1.SGM
27FER1
11394
*
*
Federal Register / Vol. 77, No. 38 / Monday, February 27, 2012 / Rules and Regulations
*
*
*
[FR Doc. 2012–4563 Filed 2–24–12; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
40 CFR Part 93
[EPA–HQ–OAR–2011–0393; FRL–9636–5]
RIN 2060–AR03
Transportation Conformity Rule:
MOVES Regional Grace Period
Extension
Environmental Protection
Agency (EPA).
ACTION: Final rule.
AGENCY:
EPA is taking final action to
extend the grace period before the
MOtor Vehicle Emission Simulator
(MOVES) model is required for regional
emissions analyses for transportation
conformity determinations (‘‘regional
conformity analyses’’). This final rule
provides an additional year to the
previously established two-year
conformity grace period. As a result,
EPA is announcing in this Federal
Register that MOVES must be used for
new regional conformity analyses that
begin after March 2, 2013. This action
does not affect EPA’s previous approval
of the use of MOVES in state air quality
implementation plan (SIP) submissions
or the existing grace period before
MOVES is required for carbon
monoxide and particulate matter hotspot analyses for project-level
SUMMARY:
conformity determinations (75 FR
79370).
DATES: This rule is effective on February
27, 2012.
ADDRESSES: EPA has established a
docket for this action under Docket ID
No. EPA–HQ–OAR–2011–0393. All
documents in the docket are listed in
the www.regulations.gov index.
Although listed in the index, some
information may not be publicly
available, e.g., CBI or other information
whose disclosure is restricted by statute.
Certain other material, such as
copyrighted material, will be publicly
available only in hard copy. Publicly
available docket materials are available
either electronically in
www.regulations.gov or in hard copy at
the Air and Radiation Docket, EPA/DC,
EPA West, Room 3334, 1301
Constitution Ave. NW., Washington,
DC. The Public Reading Room is open
from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal
holidays. The telephone number for the
Public Reading Room is (202) 566–1744
and the telephone number for the Air
and Radiation Docket is (202) 566–1742.
FOR FURTHER INFORMATION CONTACT: Meg
Patulski, State Measures and
Transportation Planning Center,
Transportation and Climate Division,
Environmental Protection Agency, 2000
Traverwood Drive, Ann Arbor, MI
48105; telephone number: (734) 214–
4842; fax number: (734) 214–4052;
email address: patulski.meg@epa.gov; or
Astrid Larsen, State Measures and
Transportation Planning Center,
Transportation and Climate Division,
Environmental Protection Agency, 2000
Traverwood Drive, Ann Arbor, MI
48105; telephone number: (734) 214–
4812; fax number: (734) 214–4052;
email address: larsen.astrid@epa.gov.
SUPPLEMENTARY INFORMATION:
The content of this preamble is listed
in the following outline:
I. General Information
II. Background
III. Extension of MOVES Regional Conformity
Grace Period
IV. Conformity SIPs
V. Statutory and Executive Order Reviews
Availability of MOVES and Support
Materials
Copies of the official version of the
MOVES motor vehicle emissions model,
along with user guides and supporting
documentation, are available on EPA’s
MOVES Web site: www.epa.gov/otaq/
models/moves/index.htm.
Guidance on how to apply MOVES for
SIPs and transportation conformity
purposes can be found on the EPA’s
transportation conformity Web site at:
www.epa.gov/otaq/stateresources/
transconf/policy.htm.
I. General Information
A. Does this action apply to me?
Entities potentially regulated by the
transportation conformity rule are those
that adopt, approve, or fund
transportation plans, transportation
improvement programs (TIPs), or
projects under title 23 U.S.C. or title 49
U.S.C. chapter 53. Regulated categories
and entities affected by today’s action
include:
Category
Examples of regulated entities
Local government ...............................................
Local transportation and air quality agencies, including metropolitan planning organizations
(MPOs).
State transportation and air quality agencies.
Department of Transportation (Federal Highway Administration (FHWA) and Federal Transit
Administration (FTA)).
wreier-aviles on DSK5TPTVN1PROD with RULES
State government ...............................................
Federal government ............................................
This table is not intended to be
exhaustive, but rather provides a guide
for readers regarding entities likely to be
affected by this final rule. This table
lists the types of entities of which EPA
is aware that potentially could be
regulated by the transportation
conformity rule. Other types of entities
not listed in the table could also be
regulated. To determine whether your
organization is regulated by this action,
you should carefully examine the
applicability requirements in 40 CFR
93.102. If you have questions regarding
the applicability of this final rule to a
particular entity, consult the persons
VerDate Mar<15>2010
14:41 Feb 24, 2012
Jkt 226001
listed in the preceding FOR FURTHER
section.
INFORMATION CONTACT
B. How do I get copies of this final rule
and other documents?
1. Docket
EPA has established an official public
docket for this action under Docket ID
No. EPA–HQ–OAR–2011–0393. You can
get a paper copy of this Federal Register
document, as well as the documents
specifically referenced in this action,
any public comments received, and
other information related to this action
at the official public docket. See the
ADDRESSES section for its location.
PO 00000
Frm 00012
Fmt 4700
Sfmt 4700
2. Electronic Access
You may access this Federal Register
document electronically through EPA’s
transportation conformity Web site at:
www.epa.gov/otaq/stateresources/
transconf/conf-regs.htm. You may also
access this document electronically
under the Federal Register listings at:
www.epa.gov/fedrgstr/.
An electronic version of the official
public docket is available through
www.regulations.gov. You may use
www.regulations.gov to view public
comments, access the index listing of
the contents of the official public
docket, and to access those documents
in the public docket that are available
E:\FR\FM\27FER1.SGM
27FER1
]]>Agencies
[Federal Register Volume 77, Number 38 (Monday, February 27, 2012)]
[Rules and Regulations]
[Pages 11390-11394]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2012-4563]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Part 63
[EPA-R09-OAR-2012-0117; FRL-9635-7]
Delegation of National Emission Standards for Hazardous Air
Pollutants for Source Categories; Nevada
AGENCY: Environmental Protection Agency (EPA).
ACTION: Direct final rule.
-----------------------------------------------------------------------
SUMMARY: EPA is amending certain regulations to reflect the current
delegation status of national emission standards for hazardous air
pollutants (NESHAP) in Nevada. Several NESHAP were delegated to the
Nevada Division of Environmental Protection on October 6, 2011. The
purpose of this action is to update the listing in the Code of Federal
Regulations.
DATES: This rule is effective on April 27, 2012 without further notice,
unless EPA receives adverse comments by March 28, 2012. If we receive
such comments, we will publish a timely withdrawal in the Federal
Register to notify the public that this direct final rule will not take
effect.
ADDRESSES: Submit comments, identified by docket number EPA-R09-OAR-
2012-0117, by one of the following methods:
1. Federal eRulemaking Portal: www.regulations.gov. Follow the on-
line instructions.
2. Email: steckel.andrew@epa.gov.
3. Mail or delivery: Andrew Steckel (AIR-4), U.S. Environmental
Protection Agency Region IX, 75 Hawthorne Street, San Francisco, CA
94105-3901.
Instructions: All comments will be included in the public docket
without change and may be made available online at www.regulations.gov,
including any personal information provided, unless the comment
includes Confidential Business Information (CBI) or other information
whose disclosure is restricted by statute. Information that you
consider CBI or otherwise protected should be clearly identified as
such and should not be submitted through www.regulations.gov or email.
www.regulations.gov is an ``anonymous access'' system, and EPA will not
know your identity or contact information unless you provide it in the
body of your comment. If you send email directly to EPA, your email
address will be automatically captured and included as part of the
public comment. If EPA cannot read your comment due to technical
difficulties and cannot contact you for clarification, EPA may not be
able to consider your comment. Electronic files should avoid the use of
special characters, any form of encryption, and be free of any defects
or viruses.
Docket: The index to the docket for this action is available
electronically at www.regulations.gov and in hard copy at EPA Region
IX, 75 Hawthorne Street, San Francisco, California. While all documents
in the docket are listed in the index, some information may be publicly
available only at the hard copy location (e.g., copyrighted material),
and some may not be publicly available in either location (e.g., CBI).
To inspect the hard copy materials, please schedule an appointment
during normal business hours with the contact listed in the FOR FURTHER
INFORMATION CONTACT section.
FOR FURTHER INFORMATION CONTACT: Rynda Kay, EPA Region IX, (415) 947-
4118, kay.rynda@epa.gov.
SUPPLEMENTARY INFORMATION: Throughout this document, ``we,'' ``us'' and
``our'' refer to EPA.
Table of Contents
I. Background
A. Delegation of NESHAP
B. NDEP Delegations
II. EPA Action
III. Statutory and Executive Order Reviews
I. Background
A. Delegation of NESHAP
Section 112(l) of the Clean Air Act, as amended in 1990 (CAA),
authorizes EPA to delegate to State or local air pollution control
agencies the authority to implement and enforce the standards set out
in the Code of Federal Regulations, Title 40 (40 CFR), part 63,
National Emission Standards for Hazardous Air Pollutants for Source
Categories. On November 26, 1993, EPA promulgated regulations, codified
at 40 CFR part 63, Subpart E (hereinafter referred to as ``Subpart
E''), establishing procedures for EPA's approval of State rules or
programs under section 112(l) (see 58 FR 62262). Subpart E was later
amended on September 14, 2000 (see 65 FR 55810).
Any request for approval under CAA section 112(l) must meet the
approval criteria in 112(l)(5) and Subpart E. To streamline the
approval process for future applications, a State or local agency may
submit a one-time demonstration that it has adequate authorities and
resources to implement and enforce any CAA section 112 standards. If
such demonstration is approved, then the State or local agency would no
longer need to resubmit a demonstration of these same authorities and
resources for every subsequent request for delegation of CAA section
112 standards. However, EPA maintains the authority to withdraw its
approval if the State does not adequately implement or enforce an
approved rule or program.
B. NDEP Delegations
On May 27, 1998, EPA published a direct final action delegating to
the NDEP several NESHAP and approving NDEP's delegation mechanism for
future standards (see 63 FR 28906). That action explained the procedure
for EPA to grant future delegations to NDEP by letter, with periodic
Federal Register listings of standards that have been delegated. On
August 19, 2011, NDEP requested delegation of the following NESHAP
contained in 40 CFR part 63:
The amendments to Subpart LLL--NESHAP from the Portland
Cement Manufacturing Industry, as set forth in 75 FR 54970 (September
9, 2010).
The amendments to Subpart ZZZZ--NESHAP for Stationary
Reciprocating Internal Combustion Engines, as set forth in 75 FR 51570
(August 20, 2010) and 76 FR 12863 (March 9, 2011).
Subpart DDDDD--NESHAP for Industrial, Commercial, and
Institutional Boilers and Process Heaters.
Subpart BBBBBB--NESHAP for Source Category: Gasoline
Distribution Bulk Terminals, Bulk Plants, and Pipeline Facilities.
Subpart CCCCCC--NESHAP for Source Category: Gasoline
Dispensing Facilities.
Subpart HHHHHH--NESHAP: Paint Stripping and Miscellaneous
Surface Coating Operations at Area Sources.
Subpart JJJJJJ--NESHAP for Industrial, Commercial, and
Institutional Boilers Area Sources.
Subpart VVVVVV--NESHAP for Chemical Manufacturing Area
Sources.
Subpart WWWWWW--NESHAP: Area Source Standards for Plating
and Polishing Operations.
Subpart XXXXXX--NESHAP Area Source Standards for Nine
Metal Fabrication and Finishing Source Categories.
Subpart ZZZZZZ--NESHAP: Area Source Standards for
Aluminum, Copper, and Other Nonferrous Foundries.
[[Page 11391]]
Subpart AAAAAAA--NESHAP for Area Sources: Asphalt
Processing and Asphalt Roofing Manufacturing.
Subpart BBBBBBB--NESHAP for Area Sources: Chemical
Preparations Industry.
Subpart CCCCCCC--NESHAP for Area Sources: Paints and
Allied Products Manufacturing.
Subpart EEEEEEE--NESHAP: Gold Mine Ore Processing and
Production Area Source Category.
On October 6, 2011, EPA granted delegation to NDEP for these
NESHAP, along with any amendments made to previously-delegated NESHAP
as of July 1, 2010. Today's action is serving to notify the public of
the October 6, 2011, delegation and to codify these delegations into
the Code of Federal Regulations.
II. EPA Action
Today's document serves to notify the public of the delegation of
NESHAP to NDEP on October 6, 2011. Today's action will codify these
delegations into the CFR.
III. Statutory and Executive Order Reviews
Under the CAA, the Administrator is required to approve delegation
requests that comply with the provisions of the CAA and applicable
Federal regulations. 42 U.S.C. 7412(l); 40 CFR 63.91(b). Thus, in
reviewing delegation submissions, EPA's role is to approve State
choices, provided that they meet the criteria of the CAA. Accordingly,
this action merely approves State law as meeting Federal requirements
and does not impose additional requirements beyond those imposed by
State law. For that reason, this action:
Is not a ``significant regulatory action'' subject to
review by the Office of Management and Budget under Executive Order
12866 (58 FR 51735, October 4, 1993);
Does not impose an information collection burden under the
provisions of the Paperwork Reduction Act (44 U.S.C. 3501 et seq.);
Is certified as not having a significant economic impact
on a substantial number of small entities under the Regulatory
Flexibility Act (5 U.S.C. 601 et seq.);
Does not contain any unfunded mandate or significantly or
uniquely affect small governments, as described in the Unfunded
Mandates Reform Act of 1995 (Pub. L. 104-4);
Does not have Federalism implications as specified in
Executive Order 13132 (64 FR 43255, August 10, 1999);
Is not an economically significant regulatory action based
on health or safety risks subject to Executive Order 13045 (62 FR
19885, April 23, 1997);
Is not a significant regulatory action subject to
Executive Order 13211 (66 FR 28355, May 22, 2001);
Is not subject to requirements of Section 12(d) of the
National Technology Transfer and Advancement Act of 1995 (15 U.S.C. 272
note) because application of those requirements would be inconsistent
with the CAA; and
Does not provide EPA with the discretionary authority to
address disproportionate human health or environmental effects with
practical, appropriate, and legally permissible methods under Executive
Order 12898 (59 FR 7629, February 16, 1994).
In addition, this rule does not have tribal implications as specified
by Executive Order 13175 (65 FR 67249, November 9, 2000), because the
delegations are not approved to apply in Indian country located in the
State, and EPA notes that it will not impose substantial direct costs
on tribal governments or preempt tribal law.
The Congressional Review Act, 5 U.S.C. 801 et seq., as added by the
Small Business Regulatory Enforcement Fairness Act of 1996, generally
provides that before a rule may take effect, the agency promulgating
the rule must submit a rule report, which includes a copy of the rule,
to each House of the Congress and to the Comptroller General of the
United States. EPA will submit a report containing this action and
other required information to the U.S. Senate, the U.S. House of
Representatives, and the Comptroller General of the United States prior
to publication of the rule in the Federal Register. A major rule cannot
take effect until 60 days after it is published in the Federal
Register. This action is not a ``major rule'' as defined by 5 U.S.C.
804(2).
Under section 307(b)(1) of the CAA, petitions for judicial review
of this action must be filed in the United States Court of Appeals for
the appropriate circuit by April 27, 2012. Filing a petition for
reconsideration by the Administrator of this final rule does not affect
the finality of this action for the purposes of judicial review nor
does it extend the time within which a petition for judicial review may
be filed, and shall not postpone the effectiveness of such rule or
action. Parties with objections to this direct final rule are
encouraged to file a comment in response to the parallel notice of
proposed rulemaking for this action published in the Proposed Rules
section of today's Federal Register, rather than file an immediate
petition for judicial review of this direct final rule, so that EPA can
withdraw this direct final rule and address the comment in the proposed
rulemaking. This action may not be challenged later in proceedings to
enforce its requirements (see section 307(b)(2)).
Authority: This action is issued under the authority of Section
112 of the Clean Air Act, as amended, 42 U.S.C. Section 7412.
List of Subjects in 40 CFR Part 63
Environmental protection, Administrative practice and procedure,
Air pollution control, Hazardous substances, Intergovernmental
relations, Reporting and recordkeeping requirements.
Dated: February 13, 2012.
Deborah Jordan,
Director, Air Division, Region IX.
Title 40, chapter I, part 63 of the Code of Federal Regulations is
amended as follows:
PART 63--[AMENDED]
0
1. The authority citation for Part 63 continues to read as follows:
Authority: 42 U.S.C. 7401, et seq.
Subpart E--Approval of State Programs and Delegation of Federal
Authorities
0
2. Section 63.99 is amended by revising the table in paragraph
(a)(29)(i) to read as follows:
Sec. 63.99 Delegated Federal authorities.
(a) * * *
(29) * * *
(i) * * *
Delegation Status for Part 63 Standards--Nevada
----------------------------------------------------------------------------------------------------------------
Subpart Description NDEP \1\ Washoe \2\ Clark \3\
----------------------------------------------------------------------------------------------------------------
A............................... General Provisions......... X X X
F............................... Synthetic Organic Chemical X ............... X
Manufacturing Industry.
[[Page 11392]]
G............................... Synthetic Organic Chemical X ............... X
Manufacturing Industry:
Process Vents, Storage
Vessels, Transfer
Operations, and Wastewater.
H............................... Organic Hazardous Air X ............... X
Pollutants: Equipment
Leaks.
I............................... Organic Hazardous Air X ............... X
Pollutants: Certain
Processes Subject to the
Negotiated Regulation for
Equipment Leaks.
J............................... Polyvinyl Chloride and X ............... X
Copolymers Production.
L............................... Coke Oven Batteries........ X ............... X
M............................... Perchloroethylene Dry X X X
Cleaning.
N............................... Hard and Decorative X X X
Chromium Electroplating
and Chromium Anodizing
Tanks.
O............................... Ethylene Oxide X X X
Sterilization Facilities.
Q............................... Industrial Process Cooling X ............... X
Towers.
R............................... Gasoline Distribution X X X
Facilities.
S............................... Pulp and Paper............. X ............... X
T............................... Halogenated Solvent X X X
Cleaning.
U............................... Group I Polymers and Resins X ............... X
W............................... Epoxy Resins Production and X ............... X
Non-Nylon Polyamides
Production.
X............................... Secondary Lead Smelting.... X ............... X
Y............................... Marine Tank Vessel Loading X ............... ...............
Operations.
AA.............................. Phosphoric Acid X ............... X
Manufacturing Plants.
BB.............................. Phosphate Fertilizers X ............... X
Production Plants.
CC.............................. Petroleum Refineries....... X ............... X
DD.............................. Off-Site Waste and Recovery X ............... X
Operations.
EE.............................. Magnetic Tape Manufacturing X ............... X
Operations.
GG.............................. Aerospace Manufacturing and X ............... X
Rework Facilities.
HH.............................. Oil and Natural Gas X ............... X
Production Facilities.
II.............................. Shipbuilding and Ship X ............... X
Repair (Surface Coating).
JJ.............................. Wood Furniture X ............... X
Manufacturing Operations.
KK.............................. Printing and Publishing X X X
Industry.
LL.............................. Primary Aluminum Reduction X ............... X
Plants.
MM.............................. Chemical Recovery X ............... X
Combustion Sources at
Kraft, Soda, Sulfite, and
Stand-Alone Semichemical
Pulp Mills.
OO.............................. Tanks--Level 1............. X ............... X
PP.............................. Containers................. X ............... X
QQ.............................. Surface Impoundments....... X ............... X
RR.............................. Individual Drain Systems... X ............... X
SS.............................. Closed Vent Systems, X ............... X
Control Devices, Recovery
Devices and Routing to a
Fuel Gas System or a
Process.
TT.............................. Equipment Leaks--Control X ............... X
Level 1.
UU.............................. Equipment Leaks--Control X ............... X
Level 2.
VV.............................. Oil-Water Separators and X ............... X
Organic-Water Separators.
WW.............................. Storage Vessels (Tanks)-- X ............... X
Control Level 2.
XX.............................. Ethylene Manufacturing X ............... X
Process Units: Heat
Exchange Systems and Waste
Operations.
YY.............................. Generic MACT Standards..... X ............... X
CCC............................. Steel Pickling............. X ............... X
DDD............................. Mineral Wool Production.... X ............... X
EEE............................. Hazardous Waste Combustors. X ............... X
GGG............................. Pharmaceuticals Production. X ............... X
HHH............................. Natural Gas Transmission X ............... X
and Storage Facilities.
III............................. Flexible Polyurethane Foam X ............... X
Production.
JJJ............................. Group IV Polymers and X ............... X
Resins.
LLL............................. Portland Cement X ............... X
Manufacturing Industry.
MMM............................. Pesticide Active Ingredient X ............... X
Production.
NNN............................. Wool Fiberglass X ............... X
Manufacturing.
OOO............................. Manufacture of Amino/ X ............... X
Phenolic Resins.
PPP............................. Polyether Polyols X ............... X
Production.
QQQ............................. Primary Copper Smelting.... X ............... X
RRR............................. Secondary Aluminum X ............... X
Production.
TTT............................. Primary Lead Smelting...... X ............... X
UUU............................. Petroleum Refineries: X ............... X
Catalytic Cracking,
Catalytic Reforming, and
Sulfur Recovery Units.
VVV............................. Publicly Owned Treatment X X X
Works.
XXX............................. Ferroalloys Production..... X ............... X
AAAA............................ Municipal Solid Waste X ............... X
Landfills.
CCCC............................ Manufacturing of X ............... X
Nutritional Yeast.
DDDD............................ Plywood and Composite Wood X ............... X
Products.
EEEE............................ Organic Liquids X X X
Distribution (non-
gasoline).
FFFF............................ Miscellaneous Organic X ............... X
Chemical Manufacturing.
GGGG............................ Solvent Extraction for X ............... X
Vegetable Oil Production.
HHHH............................ Wet-Formed Fiberglass Mat X ............... X
Production.
IIII............................ Surface Coating of X ............... X
Automobiles and Light-Duty
Trucks.
[[Page 11393]]
JJJJ............................ Paper and Other Web Coating X ............... X
KKKK............................ Surface Coating of Metal X ............... X
Cans.
MMMM............................ Miscellaneous Metal Parts X ............... X
and Products.
NNNN............................ Large Appliances........... X ............... X
OOOO............................ Printing, Coating, and X ............... X
Dyeing of Fabrics and
Other Textiles.
PPPP............................ Surface Coating of Plastic X ............... X
Parts and Products.
QQQQ............................ Wood Building Products..... X ............... X
RRRR............................ Surface Coating of Metal X ............... X
Furniture.
SSSS............................ Surface Coating of Metal X ............... X
Coil.
TTTT............................ Leather Finishing X ............... X
Operations.
UUUU............................ Cellulose Products X ............... X
Manufacturing.
VVVV............................ Boat Manufacturing......... X ............... X
WWWW............................ Reinforced Plastics X X X
Composites Production.
XXXX............................ Tire Manufacturing......... X ............... X
YYYY............................ Stationary Combustion X ............... X
Turbines.
ZZZZ............................ Stationary Reciprocating X X X
Internal Combustion
Engines.
AAAAA........................... Lime Manufacturing Plants.. X ............... X
BBBBB........................... Semiconductor Manufacturing X ............... X
CCCCC........................... Coke Oven: Pushing, X ............... X
Quenching and Battery
Stacks.
DDDDD........................... Industrial, Commercial, and X ............... X
Institutional Boiler and
Process Heaters.
EEEEE........................... Iron and Steel Foundries... X ............... X
FFFFF........................... Integrated Iron and Steel.. X ............... X
GGGGG........................... Site Remediation........... X ............... X
HHHHH........................... Miscellaneous Coating X ............... X
Manufacturing.
IIIII........................... Mercury Emissions from ............... ............... X
Mercury Cell Chlor-Alkali
Plants.
JJJJJ........................... Brick and Structural Clay X ............... X
Products Manufacturing.
KKKKK........................... Clay Ceramics Manufacturing X ............... X
LLLLL........................... Asphalt Roofing and X ............... X
Processing.
MMMMM........................... Flexible Polyurethane Foam X ............... X
Fabrication Operation.
NNNNN........................... Hydrochloric Acid X ............... X
Production.
PPPPP........................... Engine Test Cells/Stands... X ............... X
QQQQQ........................... Friction Products X ............... X
Manufacturing.
RRRRR........................... Taconite Iron Ore ............... ............... X
Processing.
SSSSS........................... Refractory Products X ............... X
Manufacturing.
TTTTT........................... Primary Magnesium Refining. ............... ............... X
WWWWW........................... Hospital Ethylene Oxide X X X
Sterilizers.
YYYYY........................... Electric Arc Furnace X ............... X
Steelmaking Facilities
(area sources).
ZZZZZ........................... Iron and Steel Foundries X ............... X
Area Sources.
BBBBBB.......................... Gasoline Distribution Bulk X X X
Terminals, Bulk Plants and
Pipeline Facilities.
CCCCCC.......................... Gasoline Dispensing X X X
Facilities.
DDDDDD.......................... Polyvinyl Chloride and X ............... X
Copolymers Production Area
Sources.
EEEEEE.......................... Primary Copper Smelting X ............... X
Area Sources.
FFFFFF.......................... Secondary Copper Smelting X ............... X
Area Sources.
GGGGGG.......................... Primary Nonferrous Metals X ............... X
Area Sources--Zinc,
Cadmium, and Beryllium.
HHHHHH.......................... Paint Stripping and X X X
Miscellaneous Surface
Coating Operations at Area
Sources.
JJJJJJ.......................... Industrial, Commercial, and X ............... ...............
Institutional Boilers and
Process Heaters--Area
Sources.
LLLLLL.......................... Acrylic and Modacrylic X ............... X
Fibers Production Area
Sources.
MMMMMM.......................... Carbon Black Production X ............... X
Area Sources.
NNNNNN.......................... Chemical Manufacturing Area X ............... X
Sources: Chromium
Compounds.
OOOOOO.......................... Flexible Polyurethane Foam X X X
Production and Fabrication
Area Sources.
PPPPPP.......................... Lead Acid Battery X ............... X
Manufacturing Area Sources.
QQQQQQ.......................... Wood Preserving Area X ............... X
Sources.
RRRRRR.......................... Clay Ceramics Manufacturing X ............... X
Area Sources.
SSSSSS.......................... Glass Manufacturing Area X ............... X
Sources.
TTTTTT.......................... Secondary Nonferrous Metals X ............... X
Processing Area Sources.
VVVVVV.......................... Chemical Manufacturing X ............... ...............
Industry--Area Sources.
WWWWWW.......................... Area Source Standards for X X X
Plating and Polishing
Operations.
XXXXXX.......................... Area Source Standards for X X X
Nine Metal Fabrication and
Finishing Source
Categories.
YYYYYY.......................... Area Sources: Ferroalloys ............... ............... X
Production Facilities.
ZZZZZZ.......................... Area Source Standards for X ............... X
Aluminum, Copper, and
Other Nonferrous Foundries.
AAAAAAA......................... Asphalt Processing and X ............... ...............
Asphalt Roofing
Manufacturing--Area
Sources.
BBBBBBB......................... Chemical Preparations X ............... ...............
Industry--Area Sources.
CCCCCCC......................... Paint and Allied Products X ............... ...............
Manufacturing--Area
Sources.
EEEEEEE......................... Gold Mine Ore Processing X ............... ...............
and Production--Area
Sources.
----------------------------------------------------------------------------------------------------------------
\1\ Nevada Division of Environmental Protection.
\2\ Washoe County Air Quality Management Division.
\3\ Clark County Department of Air Quality Management.
[[Page 11394]]
* * * * *
[FR Doc. 2012-4563 Filed 2-24-12; 8:45 am]
BILLING CODE 6560-50-P
