Request for Nominations for Voting Members on Public Advisory Panels or Committees, 80949-80952 [2011-33060]
Download as PDF
Federal Register / Vol. 76, No. 248 / Tuesday, December 27, 2011 / Notices
sroberts on DSK5SPTVN1PROD with NOTICES
General Function of the Committee: To
provide advice and recommendations to the
Agency on FDA’s regulatory issues.
Date and Time: The meeting will be held
on February 22, 2012, from 8 a.m. to 5 p.m.
Location: FDA White Oak Campus, 10903
New Hampshire Ave., Bldg. 31 Conference
Center, the Great Room (rm. 1503), Silver
Spring, MD 20993–0002. Information
regarding special accommodations due to a
disability, visitor parking, and transportation
may be accessed at: https://www.fda.gov/
AdvisoryCommittees/default.htm; under the
heading ‘‘Resources for You’’, click on
‘‘Public Meetings at the FDA White Oak
Campus’’. Please note that visitors to the
White Oak Campus must enter through Bldg.
1.
Contact Person: Paul Tran, Center for Drug
Evaluation and Research, Food and Drug
Administration, 10903 New Hampshire Ave.,
Bldg. 31, rm. 2417, Silver Spring, MD 20993–
0002, (301) 796–9001, Fax: (301) 847–8533,
email: EMDAC@fda.hhs.gov, or FDA
Advisory Committee Information Line, 1–
(800) 741–8138 (301) 443–0572 in the
Washington, DC area), and follow the
prompts to the desired center or product
area. Please call the Information Line for upto-date information on this meeting. A notice
in the Federal Register about last minute
modifications that impact a previously
announced advisory committee meeting
cannot always be published quickly enough
to provide timely notice. Therefore, you
should always check the Agency’s Web site
and call the appropriate advisory committee
hot line/phone line to learn about possible
modifications before coming to the meeting.
Agenda: The committee will discuss the
safety and efficacy of new drug application
(NDA) 22–580, proposed trade name QNEXA
(phentermine/topiramate) Controlled-Release
Capsules, manufactured by VIVUS, Inc., as
an adjunct to diet and exercise for weight
management in patients with a body mass
index (BMI) equal to or greater than 30
kilograms (kg) per square meter or a BMI
equal to or greater than 27 kg per square
meter if accompanied by weight-related
comorbidities.
FDA intends to make background material
available to the public no later than 2
business days before the meeting. If FDA is
unable to post the background material on its
Web site prior to the meeting, the background
material will be made publicly available at
the location of the advisory committee
meeting, and the background material will be
posted on FDA’s Web site after the meeting.
Background material is available at https://
www.fda.gov/AdvisoryCommittees/Calendar/
default.htm. Scroll down to the appropriate
advisory committee link.
Procedure: Interested persons may present
data, information, or views, orally or in
VerDate Mar<15>2010
22:00 Dec 23, 2011
Jkt 226001
writing, on issues pending before the
committee. Written submissions may be
made to the contact person on or before
February 7, 2012. Oral presentations from the
public will be scheduled between
approximately 1 p.m. and 2 p.m. Those
individuals interested in making formal oral
presentations should notify the contact
person and submit a brief statement of the
general nature of the evidence or arguments
they wish to present, the names and
addresses of proposed participants, and an
indication of the approximate time requested
to make their presentation on or before
January 30, 2012. Time allotted for each
presentation may be limited. If the number of
registrants requesting to speak is greater than
can be reasonably accommodated during the
scheduled open public hearing session, FDA
may conduct a lottery to determine the
speakers for the scheduled open public
hearing session. The contact person will
notify interested persons regarding their
request to speak by January 31, 2012.
Persons attending FDA’s advisory
committee meetings are advised that the
Agency is not responsible for providing
access to electrical outlets.
FDA welcomes the attendance of the
public at its advisory committee meetings
and will make every effort to accommodate
persons with physical disabilities or special
needs. If you require special accommodations
due to a disability, please contact Paul Tran
at least 7 days in advance of the meeting.
FDA is committed to the orderly conduct
of its advisory committee meetings. Please
visit our Web site at https://www.fda.gov/
AdvisoryCommittees/
AboutAdvisoryCommittees/ucm111462.htm
for procedures on public conduct during
advisory committee meetings.
Notice of this meeting is given under the
Federal Advisory Committee Act (5 U.S.C.
app. 2).
Dated: December 20, 2011.
Leslie Kux,
Acting Assistant Commissioner for Policy.
[FR Doc. 2011–33059 Filed 12–23–11; 8:45 am]
BILLING CODE 4160–01–P
DEPARTMENT OF HEALTH AND
HUMAN SERVICES
Food and Drug Administration
ACTION:
Notice.
The Food and Drug
Administration (FDA) is requesting
nominations for voting members to
serve on the Device Good
Manufacturing Practice Advisory
Committee, certain device panels of the
Medical Devices Advisory Committee,
and the National Mammography Quality
Assurance Advisory Committee in the
Center for Devices and Radiological
Health. Nominations will be accepted
for current vacancies and those that will
or may occur through December 31,
2012.
FDA has a special interest in ensuring
that women, minority groups, and
individuals with disabilities are
adequately represented on advisory
committees and, therefore, encourages
nominations of qualified candidates
from these groups.
SUMMARY:
Because scheduled vacancies
occur on various dates throughout each
year, no cutoff date is established for the
receipt of nominations. However, when
possible, nominations should be
received at least 6 months before the
date of scheduled vacancies for each
year, as indicated in this notice.
DATES:
All nominations for
membership should be sent
electronically to cv@oc.fda.gov, or by
mail to Advisory Committee Oversight
and Management Staff, 10903 New
Hampshire Ave., Bldg. 32, rm. 5103,
Silver Spring, MD 20993–0002.
Information about becoming a
member on a FDA advisory committee
can also be obtained by visiting FDA’s
Web site at https://www.fda.gov/
AdvisoryCommittees/default.htm.
ADDRESSES:
For
specific Committee/Panel questions,
contact the following persons listed in
table 1 of this document.
FOR FURTHER INFORMATION CONTACT:
[Docket No. FDA–2011–N–0002]
Request for Nominations for Voting
Members on Public Advisory Panels or
Committees
AGENCY:
Food and Drug Administration,
HHS.
PO 00000
Frm 00082
Fmt 4703
Sfmt 4703
80949
E:\FR\FM\27DEN1.SGM
27DEN1
80950
Federal Register / Vol. 76, No. 248 / Tuesday, December 27, 2011 / Notices
TABLE 1—CONTACT PERSONS AND COMMITTEE/PANEL NAMES
Committee/certain device panels of the Medical Devices Advisory
Committee
Contact person
LCDR Sara Anderson, Center for Devices and Radiological Health,
Food and Drug Administration, 10903 New Hampshire Ave., Bldg.
66, rm. 1544, Silver Spring, MD 20993, 301–796–7046, email:
Sara.Anderson@fda.hhs.gov.
Shanika Craig, Center for Devices and Radiological Health, Food and
Drug Administration, 10903 New Hampshire Ave., Bldg. 66, rm.
1613, Silver Spring, MD 20993, 301–796–6639, email:
Shanika.Craig@fda.hhs.gov.
Lt. Avena Russell, Center for Devices and Radiological Health, Food
and Drug Administration, 10903 New Hampshire Ave., Bldg. 66, rm.
1535, Silver Spring, MD 20993, 301–796–3805, email:
Avena.Russell@fda.hhs.gov.
Jamie Waterhouse, Center for Devices and Radiological Health, Food
and Drug Administration, 10903 New Hampshire Ave., Bldg. 66, rm.
1544, Silver Spring, MD 20993, 301–796–3036, email
Jamie.Waterhouse@fda.hhs.gov.
National Mammography Quality Assurance Advisory Committee.
Clinical Chemistry and Clinical Toxicology Devices Panel.
Dental Products Panel.
General Hospital and Personal Use Devices Panel.
Ophthalmic Devices Panel.
Microbiology Devices Panel.
Obstetrics and Gynecology Devices Panel.
Device Good Manufacturing Practice Advisory Committee.
Gastroenterology and Urology Devices Panel.
General and Plastic Surgery Devices Panel.
Neurological Devices Panel.
Orthopedic and Rehabilitation Devices Panel.
Circulatory System Devices Panel.
Ear, Nose and Throat Devices Panel.
Molecular and Clinical Genetics Devices Panel.
I. Vacancies
FDA is requesting nominations of
voting members for vacancies listed as
follows:
SUPPLEMENTARY INFORMATION:
TABLE 2—COMMITTEE/PANEL AND VACANCIES
Current &
upcoming
vacancies
sroberts on DSK5SPTVN1PROD with NOTICES
Committee/Panel expertise needed
Circulatory System Devices Panel of the Medical Devices Advisory Committee—Interventional cardiologists, electrophysiologists, invasive (vascular) radiologists, vascular and cardiothoracic surgeons, and
cardiologists with special interest in congestive heart failure.
Clinical Chemistry and Clinical Toxicology Devices Panel of the Medical Devices Advisory Committee—
Doctors of medicine or philosophy with experience in clinical chemistry, clinical toxicology, clinical pathology, clinical laboratory medicine, endocrinology, and diabetes.
Dental Products Panel of the Medical Devices Advisory Committee—Dentists, engineers, and scientists
who have expertise in the areas of dental implants, dental materials, periodontology, tissue engineering, and dental anatomy.
Ear, Nose and Throat Devices Panel of the Medical Devices Advisory Committee—Otologists,
neurotologists, and audiologists.
Gastroenterology and Urology Devices Panel of the Medical Devices Advisory Committee–Transplant
specialists, gastroenterologists, urologists, and nephrologists.
General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee—Surgeons
(general, plastic, reconstructive, pediatric, thoracic, abdominal, pelvic and endoscopic); dermatologists;
experts in biomaterials, lasers, wound healing, and quality of life; and biostatisticians.
General Hospital and Personal Use Devices Panel of the Medical Devices Advisory Committee—Internists, pediatricians, neonatologists, endocrinologists, gerontologists, nurses, biomedical engineers or
microbiologists/infection control practitioners or experts.
Microbiology Devices Panel of the Medical Devices Advisory Committee—Infectious disease clinicians,
e.g., pulmonary disease specialists, sexually transmitted disease specialists, pediatric infectious disease specialists, experts in tropical medicine and emerging infectious diseases, biofilm development;
mycologists; clinical microbiologists and virologists; clinical virology and microbiology laboratory directors, with expertise in clinical diagnosis and in vitro diagnostic assays, e.g., hepatologists; molecular
biologists.
Molecular and Clinical Genetics Devices Panel of the Medical Devices Advisory Committee—Experts in
human genetics and in the clinical management of patients with genetic disorders, e.g., pediatricians,
obstetricians, and neonatologists. Individuals with training in inborn errors of metabolism, biochemical
and/or molecular genetics, population genetics, epidemiology and related statistical training, and clinical molecular genetics testing (e.g., genotyping, array CGH, etc.). Individuals with experience in genetics counseling and medical ethics are also desired, and individuals with experience in ancillary
fields of study will be considered.
Neurological Devices Panel of the Medical Devices Advisory Committee—Neurosurgeons (cerebrovascular and pediatric), neurologists (stroke, pediatric, pain management, and movement disorders),
interventional neuroradiologists, psychiatrists, and biostatisticians.
VerDate Mar<15>2010
22:00 Dec 23, 2011
Jkt 226001
PO 00000
Frm 00083
Fmt 4703
Sfmt 4703
E:\FR\FM\27DEN1.SGM
Approximate date
needed
2
2
March 1, 2012.
1
November 1, 2012.
1
November 1, 2012.
3
January 1, 2013.
1
2
Immediately.
September 1, 2012.
1
January 1, 2013.
1
March 1, 2012
1
June 1, 2012.
2
27DEN1
July 1, 2012.
December 1, 2012.
80951
Federal Register / Vol. 76, No. 248 / Tuesday, December 27, 2011 / Notices
TABLE 2—COMMITTEE/PANEL AND VACANCIES—Continued
Current &
upcoming
vacancies
Committee/Panel expertise needed
Obstetrics and Gynecology Devices Panel of the Medical Devices Advisory Committee—Experts in
perinatology, embryology, reproductive endocrinology, pediatric gynecology, gynecological oncology,
operative hysteroscopy, pelviscopy, electrosurgery, laser surgery, assisted reproductive technologies,
contraception, postoperative adhesions, and cervical cancer and colposcopy; biostatisticians and engineers with experience in obstetrics/gynecology devices; urogynecologists; experts in breast care; experts in gynecology in the older patient; experts in diagnostic (optical) spectroscopy; experts in midwifery; labor and delivery nursing.
Ophthalmic Devices Panel of the Medical Devices Advisory Committee—Ophthalmologists specializing in
cataract and refractive surgery and vitreo-retinal surgery, in addition to vision scientists, optometrists,
and biostatisticians practiced in ophthalmic clinical trials.
Orthopaedic and Rehabilitation Devices Panel of the Medical Devices Advisory Committee—Orthopedic
surgeons (joint, spine, trauma, and pediatric); rheumatologists; engineers (biomedical, biomaterials,
and biomechanical); experts in rehabilitation medicine, sports medicine, and connective tissue engineering; and biostatisticians.
National Mammography Quality Assurance Advisory Committee—Physicians, practitioners, or other
health professionals whose clinical practice, research specialization, or professional expertise include
a significant focus on mammography.
Device Good Manufacturing Practice Advisory Committee—Vacancies include a public representative
and a health professional representative.
II. Functions
sroberts on DSK5SPTVN1PROD with NOTICES
A. Medical Devices Advisory Committee
The committee reviews and evaluates
data on the safety and effectiveness of
marketed and investigational devices
and makes recommendations for their
regulation. The panels engage in a
number of activities to fulfill the
functions of the Federal Food, Drug, and
Cosmetic Act (the FD&C Act) envisions
for device advisory panels. With the
exception of the Medical Devices
Dispute Resolution Panel, each panel,
according to its specialty area performs
the following duties: (1) Advises the
Commissioner of Food and Drugs (the
Commissioner) regarding recommended
classification or reclassification of
devices into one of three regulatory
categories, (2) advises on any possible
risks to health associated with the use
of devices, (3) advises on formulation of
product development protocols; (4)
reviews premarket approval
applications for medical devices, (5)
reviews guidelines and guidance
documents, (6) recommends exemption
of certain devices from the application
of portions of the FD&C Act, (7) advises
on the necessity to ban a device, and (8)
responds to requests from the Agency to
review and make recommendations on
specific issues or problems concerning
the safety and effectiveness of devices.
With the exception of the Medical
Devices Dispute Resolution Panel, each
panel, according to its specialty area,
may also make appropriate
recommendations to the Commissioner
on issues relating to the design of
clinical studies regarding the safety and
VerDate Mar<15>2010
22:00 Dec 23, 2011
Jkt 226001
effectiveness of marketed and
investigational devices.
The Dental Products Panel also
functions at times as a dental drug
panel. The functions of the dental drug
panel are to evaluate and recommend
whether various prescription drug
products should be changed to over-thecounter status and to evaluate data and
make recommendations concerning the
approval of new dental drug products
for human use.
The Medical Devices Dispute
Resolution Panel provides advice to the
Commissioner on complex or contested
scientific issues between FDA and
medical device sponsors, applicants, or
manufacturers relating to specific
products, marketing applications,
regulatory decisions and actions by
FDA, and Agency guidance and
policies. The panel makes
recommendations on issues that are
lacking resolution, are highly complex
in nature, or result from challenges to
regular advisory panel proceedings or
Agency decisions or actions.
B. National Mammography Quality
Assurance Advisory Committee
The functions of the committee are to
advise FDA on the following topics: (1)
Developing appropriate quality
standards and regulations for
mammography facilities; (2) developing
appropriate standards and regulations
for bodies accrediting mammography
facilities under this program; (3)
developing regulations with respect to
sanctions; (4) developing procedures for
monitoring compliance with standards;
(5) establishing a mechanism to
investigate consumer complaints; (6)
reporting new developments concerning
PO 00000
Frm 00084
Fmt 4703
Sfmt 4703
Approximate date
needed
1
February 1, 2012.
1
Immediately.
November 1, 2012.
2
September 1, 2012.
3
February 1, 2012.
2
June 1, 2012.
breast imaging which should be
considered in the oversight of
mammography facilities; (7)
determining whether there exists a
shortage of mammography facilities in
rural and health professional shortage
areas and determining the effects of
personnel on access to the services of
such facilities in such areas; (8)
determining whether there will exist a
sufficient number of medical physicists
after October 1, 1999, and (9)
determining the costs and benefits of
compliance with these requirements.
C. Device Good Manufacturing Practice
Advisory Committee
The functions of the committee are to
review proposed regulations issuance
regarding good manufacturing practices
governing the methods used in, and the
facilities and controls used for
manufacture, packaging, storage,
installation, and servicing of devices,
and make recommendations regarding
the feasibility and reasonableness of
those proposed regulations. The
committee also reviews and makes
recommendations on proposed
guidelines developed to assist the
medical device industry in meeting the
good manufacturing practice
requirements, and provides advice with
regard to any petition submitted by a
manufacturer for an exemption or
variance from good manufacturing
practice regulations.
Section 520 of the FD&C Act, (21
U.S.C. 360(j)), as amended, provides
that the Device Good Manufacturing
Practice Advisory Committee shall be
composed of nine members as follows:
(1) Three of the members shall be
appointed from persons who are officers
E:\FR\FM\27DEN1.SGM
27DEN1
80952
Federal Register / Vol. 76, No. 248 / Tuesday, December 27, 2011 / Notices
or employees of any Federal, State, or
local government; (2) two shall be
representatives of the interests of the
device manufacturing industry; (3) two
shall be representatives of the interests
of physicians and other health
professionals; and (4) two shall be
representatives of the interests of the
general public.
III. Qualifications
A. Panels of the Medical Devices
Advisory Committee
Persons nominated for membership
on the panels should have adequately
diversified experience appropriate to
the work of the panel in such fields as
clinical and administrative medicine,
engineering, biological and physical
sciences, statistics, and other related
professions. The nature of specialized
training and experience necessary to
qualify the nominee as an expert
suitable for appointment may include
experience in medical practice,
teaching, and/or research relevant to the
field of activity of the panel. The
particular needs at this time for each
panel are listed in section I of this
document. The term of office is up to 4
years, depending on the appointment
date.
B. National Mammography Quality
Assurance Advisory Committee
Persons nominated for membership
should be physicians, practitioners, and
other health professionals, whose
clinical practice, research
specialization, or professional expertise
include a significant focus on
mammography and individuals
identified with consumer interests. Prior
experience on Federal public advisory
committees in the same or similar
subject areas will also be considered
relevant professional expertise.
The particular needs at this time for
this committee are listed in section I of
this document. The term of office is up
to 4 years, depending on the
appointment date.
sroberts on DSK5SPTVN1PROD with NOTICES
C. Device Good Manufacturing Practice
Advisory Committee
Persons nominated for membership as
a health professional or officer or
employee of any Federal, State, or local
government should have knowledge of
or expertise in any one or more of the
following areas: Quality assurance
concerning the design, manufacture,
and use of medical devices. To be
eligible for selection as a representative
of the general public, nominees should
possess appropriate qualifications to
understand and contribute to the
committee’s work. The particular needs
VerDate Mar<15>2010
22:00 Dec 23, 2011
Jkt 226001
at this time for this committee are listed
in section I of this document. The term
of office is up to 4 years, depending on
the appointment date.
IV. Nomination Procedures
Any interested person may nominate
one or more qualified persons for
membership on one or more of the
advisory panels or advisory committees.
Self-nominations are also accepted.
Nominations must include a current,
´
´
complete resume or curriculum vitae for
each nominee, and their current
business address and/or home address,
telephone number, and email address if
available. Nominations must specify the
advisory panel(s) or advisory
committee(s) for which the nominee is
recommended. Nominations must also
acknowledge that the nominee is aware
of the nomination unless selfnominated. FDA will ask potential
candidates to provide detailed
information concerning such matters
related to financial holdings,
employment, and research grants and/or
contracts to permit evaluation of
possible sources of conflict of interest.
This notice is issued under the
Federal Advisory Committee Act (5
U.S.C. app. 2) and 21 CFR part 14
relating to advisory committees.
Dated: December 20, 2011.
Leslie Kux,
Acting Assistant Commissioner for Policy.
[FR Doc. 2011–33060 Filed 12–23–11; 8:45 am]
BILLING CODE 4160–01–P
DEPARTMENT OF HEALTH AND
HUMAN SERVICES
Food and Drug Administration
[Docket No. FDA–2011–N–0002]
Request for Nominations for Voting
Members on a Public Advisory
Committee; Food Advisory Committee
AGENCY:
Food and Drug Administration,
HHS.
ACTION:
Notice.
The Food and Drug
Administration (FDA) is requesting
nominations for members with expertise
in epidemiology, pediatric
development, and analytical chemistry
or food science to serve on the Food
Advisory Committee, Center for Food
Safety and Applied Nutrition, Office of
Regulations, Policy, and Social
Sciences.
FDA has a special interest in ensuring
that women, minority groups, and
individuals with disabilities are
adequately represented on advisory
committees and, therefore, encourages
SUMMARY:
PO 00000
Frm 00085
Fmt 4703
Sfmt 4703
nominations of qualified candidates
from these groups.
DATES: Nominations received on or
before February 27, 2012 will be given
first consideration for membership on
the Food Advisory Committee.
Nominations received after February 27,
2012 will be considered for nomination
to the committee if nominees are still
needed.
All nominations for
membership should be sent
electronically to cv@oc.fda.gov or by
mail to Advisory Committee Oversight
and Management Staff, Food and Drug
Administration, 10903 New Hampshire
Ave., Bldg. 32, rm. 5103, Silver Spring,
MD 20993–0002.
FOR FURTHER INFORMATION CONTACT:
Regarding all nomination questions for
membership, the primary contact is:
Carolyn Jeletic, Office of Regulations,
Policy, and Social Sciences, Center of
Food Safety and Applied Nutrition
(HFS–024), Food and Drug
Administration, 5100 Paint Branch
Ave., College Park, MD 20740, (240)
402–1913, FAX: (301) 436–2657,
Carolyn.Jeletic@fda.hhs.gov.
Information about becoming a
member on an FDA advisory committee
can also be obtained by visiting FDA’s
Web site by using the following link:
https://www.fda.gov/
AdvisoryCommittees/default.htm.
SUPPLEMENTARY INFORMATION: FDA is
requesting nomination for voting
members on the Food Advisory
Committee.
ADDRESSES:
I. General Description of the Committee
Duties
The Food Advisory Committee (the
Committee) provides advice to the
Commissioner of Food and Drugs (the
Commissioner) and other appropriate
officials, on emerging food safety, food
science, nutrition, and other foodrelated health issues that FDA considers
of primary importance for its food and
cosmetics programs.
The Committee may be charged with
reviewing and evaluating available data
and making recommendations on
matters such as those relating to: (1)
Broad scientific and technical food- or
cosmetic-related issues, (2) the safety of
new foods and food ingredients, (3)
labeling of foods and cosmetics, (4)
nutrient needs and nutritional
adequacy, and (5) safe exposure limits
for food contaminants.
The Committee may also be asked to
provide advice and make
recommendations on ways of
communicating to the public the
potential risks associated with these
E:\FR\FM\27DEN1.SGM
27DEN1
Agencies
[Federal Register Volume 76, Number 248 (Tuesday, December 27, 2011)]
[Notices]
[Pages 80949-80952]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-33060]
-----------------------------------------------------------------------
DEPARTMENT OF HEALTH AND HUMAN SERVICES
Food and Drug Administration
[Docket No. FDA-2011-N-0002]
Request for Nominations for Voting Members on Public Advisory
Panels or Committees
AGENCY: Food and Drug Administration, HHS.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: The Food and Drug Administration (FDA) is requesting
nominations for voting members to serve on the Device Good
Manufacturing Practice Advisory Committee, certain device panels of the
Medical Devices Advisory Committee, and the National Mammography
Quality Assurance Advisory Committee in the Center for Devices and
Radiological Health. Nominations will be accepted for current vacancies
and those that will or may occur through December 31, 2012.
FDA has a special interest in ensuring that women, minority groups,
and individuals with disabilities are adequately represented on
advisory committees and, therefore, encourages nominations of qualified
candidates from these groups.
DATES: Because scheduled vacancies occur on various dates throughout
each year, no cutoff date is established for the receipt of
nominations. However, when possible, nominations should be received at
least 6 months before the date of scheduled vacancies for each year, as
indicated in this notice.
ADDRESSES: All nominations for membership should be sent electronically
to cv@oc.fda.gov, or by mail to Advisory Committee Oversight and
Management Staff, 10903 New Hampshire Ave., Bldg. 32, rm. 5103, Silver
Spring, MD 20993-0002.
Information about becoming a member on a FDA advisory committee can
also be obtained by visiting FDA's Web site at https://www.fda.gov/AdvisoryCommittees/default.htm.
FOR FURTHER INFORMATION CONTACT: For specific Committee/Panel
questions, contact the following persons listed in table 1 of this
document.
[[Page 80950]]
Table 1--Contact Persons and Committee/Panel Names
------------------------------------------------------------------------
Committee/certain device panels
Contact person of the Medical Devices Advisory
Committee
------------------------------------------------------------------------
LCDR Sara Anderson, Center for Devices National Mammography Quality
and Radiological Health, Food and Drug Assurance Advisory Committee.
Administration, 10903 New Hampshire Clinical Chemistry and Clinical
Ave., Bldg. 66, rm. 1544, Silver Toxicology Devices Panel.
Spring, MD 20993, 301-796-7046, email: Dental Products Panel.
Sara.Anderson@fda.hhs.gov. General Hospital and Personal
Use Devices Panel.
Ophthalmic Devices Panel.
Shanika Craig, Center for Devices and Microbiology Devices Panel.
Radiological Health, Food and Drug Obstetrics and Gynecology
Administration, 10903 New Hampshire Devices Panel.
Ave., Bldg. 66, rm. 1613, Silver
Spring, MD 20993, 301-796-6639, email:
Shanika.Craig@fda.hhs.gov.
Lt. Avena Russell, Center for Devices Device Good Manufacturing
and Radiological Health, Food and Drug Practice Advisory Committee.
Administration, 10903 New Hampshire Gastroenterology and Urology
Ave., Bldg. 66, rm. 1535, Silver Devices Panel.
Spring, MD 20993, 301-796-3805, email: General and Plastic Surgery
Avena.Russell@fda.hhs.gov. Devices Panel.
Neurological Devices Panel.
Orthopedic and Rehabilitation
Devices Panel.
Jamie Waterhouse, Center for Devices Circulatory System Devices
and Radiological Health, Food and Drug Panel.
Administration, 10903 New Hampshire Ear, Nose and Throat Devices
Ave., Bldg. 66, rm. 1544, Silver Panel.
Spring, MD 20993, 301-796-3036, email Molecular and Clinical Genetics
Jamie.Waterhouse@fda.hhs.gov. Devices Panel.
------------------------------------------------------------------------
SUPPLEMENTARY INFORMATION:
I. Vacancies
FDA is requesting nominations of voting members for vacancies
listed as follows:
Table 2--Committee/Panel and Vacancies
------------------------------------------------------------------------
Current &
Committee/Panel expertise upcoming Approximate date needed
needed vacancies
------------------------------------------------------------------------
Circulatory System Devices 2 July 1, 2012.
Panel of the Medical Devices
Advisory Committee--
Interventional
cardiologists,
electrophysiologists,
invasive (vascular)
radiologists, vascular and
cardiothoracic surgeons, and
cardiologists with special
interest in congestive heart
failure.
Clinical Chemistry and 2 March 1, 2012.
Clinical Toxicology Devices
Panel of the Medical Devices
Advisory Committee--Doctors
of medicine or philosophy
with experience in clinical
chemistry, clinical
toxicology, clinical
pathology, clinical
laboratory medicine,
endocrinology, and diabetes.
Dental Products Panel of the 1 November 1, 2012.
Medical Devices Advisory
Committee--Dentists,
engineers, and scientists
who have expertise in the
areas of dental implants,
dental materials,
periodontology, tissue
engineering, and dental
anatomy.
Ear, Nose and Throat Devices 1 November 1, 2012.
Panel of the Medical Devices
Advisory Committee--
Otologists, neurotologists,
and audiologists.
Gastroenterology and Urology 3 January 1, 2013.
Devices Panel of the Medical
Devices Advisory Committee-
Transplant specialists,
gastroenterologists,
urologists, and
nephrologists.
General and Plastic Surgery 1 Immediately.
Devices Panel of the Medical 2 September 1, 2012.
Devices Advisory Committee--
Surgeons (general, plastic,
reconstructive, pediatric,
thoracic, abdominal, pelvic
and endoscopic);
dermatologists; experts in
biomaterials, lasers, wound
healing, and quality of
life; and biostatisticians.
General Hospital and Personal 1 January 1, 2013.
Use Devices Panel of the
Medical Devices Advisory
Committee--Internists,
pediatricians,
neonatologists,
endocrinologists,
gerontologists, nurses,
biomedical engineers or
microbiologists/infection
control practitioners or
experts.
Microbiology Devices Panel of 1 March 1, 2012
the Medical Devices Advisory
Committee--Infectious
disease clinicians, e.g.,
pulmonary disease
specialists, sexually
transmitted disease
specialists, pediatric
infectious disease
specialists, experts in
tropical medicine and
emerging infectious
diseases, biofilm
development; mycologists;
clinical microbiologists and
virologists; clinical
virology and microbiology
laboratory directors, with
expertise in clinical
diagnosis and in vitro
diagnostic assays, e.g.,
hepatologists; molecular
biologists.
Molecular and Clinical 1 June 1, 2012.
Genetics Devices Panel of
the Medical Devices Advisory
Committee--Experts in human
genetics and in the clinical
management of patients with
genetic disorders, e.g.,
pediatricians,
obstetricians, and
neonatologists. Individuals
with training in inborn
errors of metabolism,
biochemical and/or molecular
genetics, population
genetics, epidemiology and
related statistical
training, and clinical
molecular genetics testing
(e.g., genotyping, array
CGH, etc.). Individuals with
experience in genetics
counseling and medical
ethics are also desired, and
individuals with experience
in ancillary fields of study
will be considered.
Neurological Devices Panel of 2 December 1, 2012.
the Medical Devices Advisory
Committee--Neurosurgeons
(cerebrovascular and
pediatric), neurologists
(stroke, pediatric, pain
management, and movement
disorders), interventional
neuroradiologists,
psychiatrists, and
biostatisticians.
[[Page 80951]]
Obstetrics and Gynecology 1 February 1, 2012.
Devices Panel of the Medical
Devices Advisory Committee--
Experts in perinatology,
embryology, reproductive
endocrinology, pediatric
gynecology, gynecological
oncology, operative
hysteroscopy, pelviscopy,
electrosurgery, laser
surgery, assisted
reproductive technologies,
contraception, postoperative
adhesions, and cervical
cancer and colposcopy;
biostatisticians and
engineers with experience in
obstetrics/gynecology
devices; urogynecologists;
experts in breast care;
experts in gynecology in the
older patient; experts in
diagnostic (optical)
spectroscopy; experts in
midwifery; labor and
delivery nursing.
Ophthalmic Devices Panel of 1 Immediately.
the Medical Devices Advisory November 1, 2012.
Committee--Ophthalmologists
specializing in cataract and
refractive surgery and
vitreo-retinal surgery, in
addition to vision
scientists, optometrists,
and biostatisticians
practiced in ophthalmic
clinical trials.
Orthopaedic and 2 September 1, 2012.
Rehabilitation Devices Panel
of the Medical Devices
Advisory Committee--
Orthopedic surgeons (joint,
spine, trauma, and
pediatric); rheumatologists;
engineers (biomedical,
biomaterials, and
biomechanical); experts in
rehabilitation medicine,
sports medicine, and
connective tissue
engineering; and
biostatisticians.
National Mammography Quality 3 February 1, 2012.
Assurance Advisory
Committee--Physicians,
practitioners, or other
health professionals whose
clinical practice, research
specialization, or
professional expertise
include a significant focus
on mammography.
Device Good Manufacturing 2 June 1, 2012.
Practice Advisory Committee--
Vacancies include a public
representative and a health
professional representative.
------------------------------------------------------------------------
II. Functions
A. Medical Devices Advisory Committee
The committee reviews and evaluates data on the safety and
effectiveness of marketed and investigational devices and makes
recommendations for their regulation. The panels engage in a number of
activities to fulfill the functions of the Federal Food, Drug, and
Cosmetic Act (the FD&C Act) envisions for device advisory panels. With
the exception of the Medical Devices Dispute Resolution Panel, each
panel, according to its specialty area performs the following duties:
(1) Advises the Commissioner of Food and Drugs (the Commissioner)
regarding recommended classification or reclassification of devices
into one of three regulatory categories, (2) advises on any possible
risks to health associated with the use of devices, (3) advises on
formulation of product development protocols; (4) reviews premarket
approval applications for medical devices, (5) reviews guidelines and
guidance documents, (6) recommends exemption of certain devices from
the application of portions of the FD&C Act, (7) advises on the
necessity to ban a device, and (8) responds to requests from the Agency
to review and make recommendations on specific issues or problems
concerning the safety and effectiveness of devices. With the exception
of the Medical Devices Dispute Resolution Panel, each panel, according
to its specialty area, may also make appropriate recommendations to the
Commissioner on issues relating to the design of clinical studies
regarding the safety and effectiveness of marketed and investigational
devices.
The Dental Products Panel also functions at times as a dental drug
panel. The functions of the dental drug panel are to evaluate and
recommend whether various prescription drug products should be changed
to over-the-counter status and to evaluate data and make
recommendations concerning the approval of new dental drug products for
human use.
The Medical Devices Dispute Resolution Panel provides advice to the
Commissioner on complex or contested scientific issues between FDA and
medical device sponsors, applicants, or manufacturers relating to
specific products, marketing applications, regulatory decisions and
actions by FDA, and Agency guidance and policies. The panel makes
recommendations on issues that are lacking resolution, are highly
complex in nature, or result from challenges to regular advisory panel
proceedings or Agency decisions or actions.
B. National Mammography Quality Assurance Advisory Committee
The functions of the committee are to advise FDA on the following
topics: (1) Developing appropriate quality standards and regulations
for mammography facilities; (2) developing appropriate standards and
regulations for bodies accrediting mammography facilities under this
program; (3) developing regulations with respect to sanctions; (4)
developing procedures for monitoring compliance with standards; (5)
establishing a mechanism to investigate consumer complaints; (6)
reporting new developments concerning breast imaging which should be
considered in the oversight of mammography facilities; (7) determining
whether there exists a shortage of mammography facilities in rural and
health professional shortage areas and determining the effects of
personnel on access to the services of such facilities in such areas;
(8) determining whether there will exist a sufficient number of medical
physicists after October 1, 1999, and (9) determining the costs and
benefits of compliance with these requirements.
C. Device Good Manufacturing Practice Advisory Committee
The functions of the committee are to review proposed regulations
issuance regarding good manufacturing practices governing the methods
used in, and the facilities and controls used for manufacture,
packaging, storage, installation, and servicing of devices, and make
recommendations regarding the feasibility and reasonableness of those
proposed regulations. The committee also reviews and makes
recommendations on proposed guidelines developed to assist the medical
device industry in meeting the good manufacturing practice
requirements, and provides advice with regard to any petition submitted
by a manufacturer for an exemption or variance from good manufacturing
practice regulations.
Section 520 of the FD&C Act, (21 U.S.C. 360(j)), as amended,
provides that the Device Good Manufacturing Practice Advisory Committee
shall be composed of nine members as follows: (1) Three of the members
shall be appointed from persons who are officers
[[Page 80952]]
or employees of any Federal, State, or local government; (2) two shall
be representatives of the interests of the device manufacturing
industry; (3) two shall be representatives of the interests of
physicians and other health professionals; and (4) two shall be
representatives of the interests of the general public.
III. Qualifications
A. Panels of the Medical Devices Advisory Committee
Persons nominated for membership on the panels should have
adequately diversified experience appropriate to the work of the panel
in such fields as clinical and administrative medicine, engineering,
biological and physical sciences, statistics, and other related
professions. The nature of specialized training and experience
necessary to qualify the nominee as an expert suitable for appointment
may include experience in medical practice, teaching, and/or research
relevant to the field of activity of the panel. The particular needs at
this time for each panel are listed in section I of this document. The
term of office is up to 4 years, depending on the appointment date.
B. National Mammography Quality Assurance Advisory Committee
Persons nominated for membership should be physicians,
practitioners, and other health professionals, whose clinical practice,
research specialization, or professional expertise include a
significant focus on mammography and individuals identified with
consumer interests. Prior experience on Federal public advisory
committees in the same or similar subject areas will also be considered
relevant professional expertise.
The particular needs at this time for this committee are listed in
section I of this document. The term of office is up to 4 years,
depending on the appointment date.
C. Device Good Manufacturing Practice Advisory Committee
Persons nominated for membership as a health professional or
officer or employee of any Federal, State, or local government should
have knowledge of or expertise in any one or more of the following
areas: Quality assurance concerning the design, manufacture, and use of
medical devices. To be eligible for selection as a representative of
the general public, nominees should possess appropriate qualifications
to understand and contribute to the committee's work. The particular
needs at this time for this committee are listed in section I of this
document. The term of office is up to 4 years, depending on the
appointment date.
IV. Nomination Procedures
Any interested person may nominate one or more qualified persons
for membership on one or more of the advisory panels or advisory
committees. Self-nominations are also accepted. Nominations must
include a current, complete r[eacute]sum[eacute] or curriculum vitae
for each nominee, and their current business address and/or home
address, telephone number, and email address if available. Nominations
must specify the advisory panel(s) or advisory committee(s) for which
the nominee is recommended. Nominations must also acknowledge that the
nominee is aware of the nomination unless self-nominated. FDA will ask
potential candidates to provide detailed information concerning such
matters related to financial holdings, employment, and research grants
and/or contracts to permit evaluation of possible sources of conflict
of interest.
This notice is issued under the Federal Advisory Committee Act (5
U.S.C. app. 2) and 21 CFR part 14 relating to advisory committees.
Dated: December 20, 2011.
Leslie Kux,
Acting Assistant Commissioner for Policy.
[FR Doc. 2011-33060 Filed 12-23-11; 8:45 am]
BILLING CODE 4160-01-P