Petition Requesting Exception From Lead Content Limits, 70975-70976 [2011-29504]

Download as PDF Federal Register / Vol. 76, No. 221 / Wednesday, November 16, 2011 / Notices Summary of Monitoring, Reporting, and other Requirements Under the 2010 LOA Annual Exercise Reports The Navy submitted their classified and unclassified 2010 exercise reports within the required timeframes and the unclassified report is posted on NMFS Web site: https://www.nmfs.noaa.gov/pr/ permits/incidental.htm. NMFS has reviewed both reports and they contain the information required by the 2010 LOA. The reports indicate the amounts of different types of training that occurred from November 12, 2010, to May 1, 2011. The Navy conducted zero Sinking Exercises (SINKEX) and all other exercise types conducted (classified data) fell within the amount indicated in the LOA. mstockstill on DSK4VPTVN1PROD with NOTICES 2010 Monitoring The Navy conducted the monitoring required by the 2010 LOA and described in the Monitoring Plan, which included passive acoustic monitoring utilizing high-frequency acoustic recording packages (HARPs) and marine mammal tagging and tracking. The Navy submitted their 2010 Monitoring Report, which is posted on NMFS’ Web site (https://www.nmfs.noaa.gov/pr/permits/ incidental.htm), within the required timeframe. Because data is gathered through May 1 and the report is due in July, some of the data analysis will occur in the subsequent year’s report. Navy-funded marine mammal monitoring accomplishments within NWTRC for the past year consisted of the following: Passive Acoustic Monitoring Two high-frequency acoustic monitoring packages (HARP) were deployed by Scripps Institute of Oceanography (SIO) within the NWTRC. The first HARP was deployed in January 2011 approximately 25 nm from the coast in the southern part of NOAA’s Olympic Coast National Marine Sanctuary. SIO has had HARPs in the same approximate location periodically since 2004. A second HARP was deployed in May 2011 near the edge of an underwater canyon west of the Olympic Coast National Marine Sanctuary boundary. Vocalization data from these HARPs is currently undergoing analysis by SIO and results will be presented in next year’s Monitoring Report. Tagging The Navy purchased a total of 10 satellite tracking tags suitable for deployment on a number of marine mammal species within the NWTRC. Field deployment for tagging marine mammals should occur before the end VerDate Mar<15>2010 17:45 Nov 15, 2011 Jkt 226001 of summer 2011 and will result in a three-year joint project between the Navy, NMFS, Cascadia Research Collective, Washington Department of Fish and Wildlife, and Oregon Department of Fish and Wildlife. In conclusion, the Navy successfully implemented the monitoring requirements for the NWTRC by the end of the first monitoring period. Over the next year, the Navy will continue to maintain the two HARPs that are currently in the water, while analyzing and presenting results from previously recorded data. Furthermore, the Navy will continue the joint tagging study of marine species within the NWTRC. Adaptive Management The Navy’s adaptive management of the NWTRC monitoring program involves close coordination with NMFS to align marine mammal monitoring with the overall objectives of the monitoring plan. Monitoring under the 2010 LOA only represents the beginning of the first year of a planned five-year effort. Therefore, it would be premature to draw detailed conclusions or initiate comprehensive monitoring changes before more monitoring and data analysis is complete. Authorization The Navy complied with the requirements of the 2010 LOA. Based on our review of the record, NMFS has determined that the marine mammal take resulting from the 2010 military readiness training and research activities falls within the levels previously anticipated, analyzed, and authorized. Further, the level of taking authorized in 2011 for the Navy’s NWTRC activities is consistent with our previous findings made for the total taking allowed under the NWTRC regulations. Finally, the record supports NMFS’ conclusion that the total number of marine mammals taken by the 2010 activities in the NWTRC will have no more than a negligible impact on the affected species or stock of marine mammals and will not have an unmitigable adverse impact on the availability of these species or stocks for taking for subsistence uses. Accordingly, NMFS has issued an LOA for Navy training and research activities conducted in the NWTRC from November 12, 2011, through November 11, 2012. 70975 CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket Number: CPSC–2011–0087] Petition Requesting Exception From Lead Content Limits Consumer Product Safety Commission. ACTION: Notice. AGENCY: The Consumer Product Safety Commission (‘‘Commission’’ or ‘‘CPSC’’ or ‘‘we’’) has received a petition requesting an exception from the 100 ppm lead content limit under section 101(b) of the Consumer Product Safety Improvement Act of 2008 (‘‘CPSIA’’), as amended by Public Law 112–28. We invite written comments concerning the petition. DATES: Submit comments by December 16, 2011. ADDRESSES: You may submit comments, identified by Docket No. CPSC–2011– 0087, by any of the following methods: SUMMARY: Electronic Submissions Submit electronic comments in the following way: Federal eRulemaking Portal: https:// www.regulations.gov. Follow the instructions for submitting comments. To ensure timely processing of comments, the Commission is no longer accepting comments submitted by electronic mail (email), except through https://www.regulations.gov. Written Submissions Dated: November 9, 2011. James H. Lecky, Deputy Director, Office of Protected Resources, National Marine Fisheries Service. Submit written submissions in the following way: Mail/Hand delivery/Courier (for paper, disk, or CD–ROM submissions), preferably in five copies, to: Office of the Secretary, Consumer Product Safety Commission, 4330 East West Highway, Bethesda, MD 20814; telephone (301) 504–7923. Instructions: All submissions received must include the agency name and docket number for this notice. All comments received may be posted without change, including any personal identifiers, contact information, or other personal information provided, to https://www.regulations.gov. Do not submit confidential business information, trade secret information, or other sensitive or protected information electronically. Such information should be submitted in writing. Docket: For access to the docket to read background documents or comments received, go to https:// www.regulations.gov. [FR Doc. 2011–29614 Filed 11–15–11; 8:45 am] FOR FURTHER INFORMATION CONTACT: BILLING CODE 3510–22–P Kristina Hatlelid, Ph.D., M.P.H., PO 00000 Frm 00022 Fmt 4703 Sfmt 4703 E:\FR\FM\16NON1.SGM 16NON1 70976 Federal Register / Vol. 76, No. 221 / Wednesday, November 16, 2011 / Notices Directorate for Health Sciences, Consumer Product Safety Commission, 4330 East West Highway, Bethesda, MD 20814; email: khatlelid@cpsc.gov. Under section 101(a) of the CPSIA, consumer products designed or intended primarily for children 12 years old and younger that contain lead content in excess of 100 ppm are considered to be banned hazardous substances under the Federal Hazardous Substances Act (‘‘FHSA’’). Section 101(b)(1) of the CPSIA provides for a functional purpose exception from lead content limits under certain circumstances. The exception allows us, on our own initiative, or upon petition by an interested party, to exclude a specific product, class of product, material, or component part from the lead limits established for children’s products under the CPSIA if, after notice and a hearing, we determine that: (i) The product, class of product, material, or component part requires the inclusion of lead because it is not practicable or not technologically feasible to manufacture such product, class of product, material, or component part, as the case may be, in accordance with section 101(a) of the CPSIA by removing the excessive lead or by making the lead inaccessible; (ii) the product, class of product, material, or component part is not likely to be placed in the mouth or ingested, taking into account normal and reasonably foreseeable use and abuse of such product, class of product, material, or component part by a child; and (iii) an exception for the product, class of product, material, or component part will have no measurable adverse effect on public health or safety, taking into account normal and reasonably foreseeable use and abuse. Under section 101(b)(1)(B) of the CPSIA, there is no measurable adverse effect on public health or safety if the exception will result in no measurable increase in blood lead levels of a child. Given the highly technical nature of the information sought, including data on the lead content of the product and test methods used to obtain those data, we believe that the notice and solicitation for written comments would provide the most efficient process for obtaining the necessary information, as well as provide adequate opportunity for all interested parties to participate in the proceedings. However, we would have the option to hold a public hearing or public meeting, if appropriate, to determine whether a petition for a functional purpose exception should be granted. mstockstill on DSK4VPTVN1PROD with NOTICES SUPPLEMENTARY INFORMATION: VerDate Mar<15>2010 17:45 Nov 15, 2011 Jkt 226001 On September 29, 2011, Joseph L. Ertl, Inc., Corporate office of divisions: Scale Models and Dyersville Die Cast (‘‘petitioner’’), submitted a petition requesting an exception from the lead content limit of 100 ppm under section 101(b) of the CPSIA for its die-cast rideon pedal tractors, scaled for children ages 3–10. The petitioner states that the components of its pedal tractors are made of aluminum metal die castings, which are the best alloy of choice for pedal tractor production, based on weight, cost, structural properties, surface finish and coatings, corrosion resistance, and bearing properties and wear resistance. The pedal tractor components are manufactured via the aluminum die-casting process. Although the petitioner states that it is able to meet the lead content requirements of 300 ppm for its pedal tractor components, it is unable to meet consistently the 100 ppm lead content limits, due to alloys used in the aluminum die-cast process. Accordingly, the petitioner requests an exception from the 100 ppm lead content limit to continue to manufacture its pedal tractors with components up to the 300 ppm lead content limit. Through this notice, we invite written comments on the petition. Interested parties may view a copy of the petition under supporting and related materials identified by Docket No. CPSC–2011– 0087, through https:// www.regulations.gov or on the CPSC Web site at: https://www.cpsc.gov/ library/foia/foia12/brief/ertlpetition.pdf. Interested parties also may obtain a copy of the petition by writing or calling the Office of the Secretary, Consumer Product Safety Commission, Bethesda, MD 20184; telephone (301) 504–7923. Dated: November 9, 2011. Todd A. Stevenson, Secretary, Consumer Product Safety Commission. [FR Doc. 2011–29504 Filed 11–15–11; 8:45 am] BILLING CODE 6355–01–P DEPARTMENT OF DEFENSE Office of the Secretary [Docket ID DOD–2011–OS–0125] Proposed Collection; Comment Request Defense Security Service, DoD. Notice. AGENCY: ACTION: In compliance with Section 3506 (c) (2) (A) of the Paperwork Reduction Act of 1995, the Defense Security Service (DSS) announces the SUMMARY: PO 00000 Frm 00023 Fmt 4703 Sfmt 4703 proposed extension of a public information collection and seeks public comments on the provision thereof. Comments are invited on: (a) Whether the proposed collection is necessary for the proper performance of the functions of the agency, including whether the information shall have practical utility; (b) the accuracy of the agency’s estimate of the burden of the information to be collected; and (c) ways to enhance the quality, utility and clarity of the information to be collected; and (d) ways to minimize the burden of the information collection on respondents, including through the use of automated collection techniques or other forms of information technology. DATES: Consideration will be given to all comments received by January 17, 2012. ADDRESS: You may submit comments, identified by docket number and title, by any of the following methods: • Federal Rule Making Portal: https:// www.regulations.gov. Follow the instructions for submitting comments. • Mail: Federal Docket Management System Office, 4800 Mark Center Drive, 2nd Floor, East Tower, Suite 02G09, Alexandria, VA 22350–3100. Instructions: All submissions received must include agency name, docket number and title for this Federal Register document. The general policy of comments and other submissions from members of the public is to make these submissions available for public viewing on the Internet at https:// www.regulations.gov as they are received without change, including any personal identifiers or contract information. FOR FURTHER INFORMATION CONTACT: To request more information on this proposed data collection or obtain a copy of the proposal and associated collection instrument, please write to Defense Security Service, OCIO, Attn: Mr. Prakash Kollaram, Russell-Knox Building, 27130 Telegraph Road, Quantico, VA 22134–2253, or call Defense Security Service at (571) 305– 6445. Title, Associated Form, and OMB Number: ‘‘Department of Defense Security Agreement,’’ ‘‘Appendage to Department of Defense Security Agreement,’’ ‘‘Certificate Pertaining to Foreign Interests;’’ DD Forms, 441, 441–1 and SF 328; OMB No. 0704–0194. Needs and Uses: Executive Order (EO) 12829, ‘‘National Industrial Security Program (NISP),’’ stipulates that the Secretary of Defense shall serve as the Executive Agent for inspecting and monitoring the contractors, licensees, and grantees who require or will require access to or, who store or will store E:\FR\FM\16NON1.SGM 16NON1

Agencies

[Federal Register Volume 76, Number 221 (Wednesday, November 16, 2011)]
[Notices]
[Pages 70975-70976]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-29504]


=======================================================================
-----------------------------------------------------------------------

CONSUMER PRODUCT SAFETY COMMISSION

[CPSC Docket Number: CPSC-2011-0087]


Petition Requesting Exception From Lead Content Limits

AGENCY: Consumer Product Safety Commission.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Consumer Product Safety Commission (``Commission'' or 
``CPSC'' or ``we'') has received a petition requesting an exception 
from the 100 ppm lead content limit under section 101(b) of the 
Consumer Product Safety Improvement Act of 2008 (``CPSIA''), as amended 
by Public Law 112-28. We invite written comments concerning the 
petition.

DATES: Submit comments by December 16, 2011.

ADDRESSES: You may submit comments, identified by Docket No. CPSC-2011-
0087, by any of the following methods:

Electronic Submissions

    Submit electronic comments in the following way:
    Federal eRulemaking Portal: https://www.regulations.gov. Follow the 
instructions for submitting comments.
    To ensure timely processing of comments, the Commission is no 
longer accepting comments submitted by electronic mail (email), except 
through https://www.regulations.gov.

Written Submissions

    Submit written submissions in the following way:
    Mail/Hand delivery/Courier (for paper, disk, or CD-ROM 
submissions), preferably in five copies, to: Office of the Secretary, 
Consumer Product Safety Commission, 4330 East West Highway, Bethesda, 
MD 20814; telephone (301) 504-7923.
    Instructions: All submissions received must include the agency name 
and docket number for this notice. All comments received may be posted 
without change, including any personal identifiers, contact 
information, or other personal information provided, to https://www.regulations.gov. Do not submit confidential business information, 
trade secret information, or other sensitive or protected information 
electronically. Such information should be submitted in writing.
    Docket: For access to the docket to read background documents or 
comments received, go to https://www.regulations.gov.

FOR FURTHER INFORMATION CONTACT: Kristina Hatlelid, Ph.D., M.P.H.,

[[Page 70976]]

Directorate for Health Sciences, Consumer Product Safety Commission, 
4330 East West Highway, Bethesda, MD 20814; email: khatlelid@cpsc.gov.

SUPPLEMENTARY INFORMATION: Under section 101(a) of the CPSIA, consumer 
products designed or intended primarily for children 12 years old and 
younger that contain lead content in excess of 100 ppm are considered 
to be banned hazardous substances under the Federal Hazardous 
Substances Act (``FHSA'').
    Section 101(b)(1) of the CPSIA provides for a functional purpose 
exception from lead content limits under certain circumstances. The 
exception allows us, on our own initiative, or upon petition by an 
interested party, to exclude a specific product, class of product, 
material, or component part from the lead limits established for 
children's products under the CPSIA if, after notice and a hearing, we 
determine that: (i) The product, class of product, material, or 
component part requires the inclusion of lead because it is not 
practicable or not technologically feasible to manufacture such 
product, class of product, material, or component part, as the case may 
be, in accordance with section 101(a) of the CPSIA by removing the 
excessive lead or by making the lead inaccessible; (ii) the product, 
class of product, material, or component part is not likely to be 
placed in the mouth or ingested, taking into account normal and 
reasonably foreseeable use and abuse of such product, class of product, 
material, or component part by a child; and (iii) an exception for the 
product, class of product, material, or component part will have no 
measurable adverse effect on public health or safety, taking into 
account normal and reasonably foreseeable use and abuse. Under section 
101(b)(1)(B) of the CPSIA, there is no measurable adverse effect on 
public health or safety if the exception will result in no measurable 
increase in blood lead levels of a child. Given the highly technical 
nature of the information sought, including data on the lead content of 
the product and test methods used to obtain those data, we believe that 
the notice and solicitation for written comments would provide the most 
efficient process for obtaining the necessary information, as well as 
provide adequate opportunity for all interested parties to participate 
in the proceedings. However, we would have the option to hold a public 
hearing or public meeting, if appropriate, to determine whether a 
petition for a functional purpose exception should be granted.
    On September 29, 2011, Joseph L. Ertl, Inc., Corporate office of 
divisions: Scale Models and Dyersville Die Cast (``petitioner''), 
submitted a petition requesting an exception from the lead content 
limit of 100 ppm under section 101(b) of the CPSIA for its die-cast 
ride-on pedal tractors, scaled for children ages 3-10. The petitioner 
states that the components of its pedal tractors are made of aluminum 
metal die castings, which are the best alloy of choice for pedal 
tractor production, based on weight, cost, structural properties, 
surface finish and coatings, corrosion resistance, and bearing 
properties and wear resistance. The pedal tractor components are 
manufactured via the aluminum die-casting process. Although the 
petitioner states that it is able to meet the lead content requirements 
of 300 ppm for its pedal tractor components, it is unable to meet 
consistently the 100 ppm lead content limits, due to alloys used in the 
aluminum die-cast process. Accordingly, the petitioner requests an 
exception from the 100 ppm lead content limit to continue to 
manufacture its pedal tractors with components up to the 300 ppm lead 
content limit.
    Through this notice, we invite written comments on the petition. 
Interested parties may view a copy of the petition under supporting and 
related materials identified by Docket No. CPSC-2011-0087, through 
https://www.regulations.gov or on the CPSC Web site at: https://www.cpsc.gov/library/foia/foia12/brief/ertlpetition.pdf. Interested 
parties also may obtain a copy of the petition by writing or calling 
the Office of the Secretary, Consumer Product Safety Commission, 
Bethesda, MD 20184; telephone (301) 504-7923.

    Dated: November 9, 2011.
Todd A. Stevenson,
Secretary, Consumer Product Safety Commission.
[FR Doc. 2011-29504 Filed 11-15-11; 8:45 am]
BILLING CODE 6355-01-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.