Notice of Proposed Withdrawal, Transfer of Jurisdiction, and Notice of Public Meeting; California, 67473 [2011-28261]
Download as PDF
Federal Register / Vol. 76, No. 211 / Tuesday, November 1, 2011 / Notices
BLM will reply during normal business
hours.
INTERNATIONAL TRADE
COMMISSION
Dina L. Torres,
Land Transfer Resolution Specialist, Branch
of Land Transfer Adjudication II.
[Investigation Nos. 731–TA–865–867
(Second Review)]
[FR Doc. 2011–28262 Filed 10–31–11; 8:45 am]
BILLING CODE 4310–JA–P
DEPARTMENT OF THE INTERIOR
Bureau of Land Management
Stainless Steel Butt-Weld Pipe Fittings
from Italy, Malaysia, and The
Philippines; Institution of Five-Year
Reviews Concerning the Antidumping
Duty Orders on Stainless Steel ButtWeld Pipe Fittings From Italy,
Malaysia, and the Philippines
United States International
Trade Commission.
ACTION: Notice.
AGENCY:
[CACA 43949, LLCA930000,
L14300000.ET0000]
Notice of Proposed Withdrawal,
Transfer of Jurisdiction, and Notice of
Public Meeting; California
AGENCY:
Bureau of Land Management,
Interior.
ACTION:
Notice; Correction.
The Bureau of Land
Management (BLM) published a notice
in the Federal Register on December 31,
2003, (68 FR 75628) that contained an
erroneous legal description. This
correction also supersedes and replaces
the correction made on November 17,
2010 (75 FR 70288).
SUMMARY:
Correction
On page 75628 in the second column,
line 12, the acreage is corrected to read
3,385 acres of public lands for use as a
mountain warfare training facility.
On page 75628 in the second column,
lines 56 and 57, correct the legal
description to read: sec. 24, lots 4, 5, 20,
22, 24, 26, and SW1⁄4SW1⁄4; and sec. 25,
all;
On page 75628 in the third column,
line 2, the acreage is corrected to read
3,385 acres in San Diego County.
FOR FURTHER INFORMATION CONTACT:
Heather Fullerton, Realty Specialist,
BLM, California State Office, 2800
Cottage Way, Suite W–1834,
Sacramento, California 95825, or phone
(916) 978–4634.
Tom Pogacnik,
Deputy State Director for Natural Resources.
srobinson on DSK4SPTVN1PROD with NOTICES
[FR Doc. 2011–28261 Filed 10–31–11; 8:45 am]
BILLING CODE 4310–40–P
VerDate Mar<15>2010
17:04 Oct 31, 2011
Jkt 226001
The Commission hereby gives
notice that it has instituted reviews
pursuant to section 751(c) of the Tariff
Act of 1930 (19 U.S.C. 1675(c)) (the Act)
to determine whether revocation of the
antidumping duty orders on stainless
steel butt-weld pipe fittings from Italy,
Malaysia, and the Philippines would be
likely to lead to continuation or
recurrence of material injury. Pursuant
to section 751(c)(2) of the Act, interested
parties are requested to respond to this
notice by submitting the information
specified below to the Commission; 1 to
be assured of consideration, the
deadline for responses is December 1,
2011. Comments on the adequacy of
responses may be filed with the
Commission by January 13, 2012. For
further information concerning the
conduct of these reviews and rules of
general application, consult the
Commission’s Rules of Practice and
Procedure, part 201, subparts A through
E (19 CFR part 201), and part 207,
subparts A, D, E, and F (19 CFR part
207), as most recently amended at 74 FR
2847 (January 16, 2009).
DATES: Effective Date: November 1,
2011.
SUMMARY:
FOR FURTHER INFORMATION CONTACT:
Mary Messer ((202) 205–3193), Office of
Investigations, U.S. International Trade
Commission, 500 E Street SW.,
Washington, DC 20436. Hearingimpaired persons can obtain
information on this matter by contacting
the Commission’s TDD terminal on
(202) 205–1810. Persons with mobility
impairments who will need special
assistance in gaining access to the
1 No response to this request for information is
required if a currently valid Office of Management
and Budget (OMB) number is not displayed; the
OMB number is 3117–0016/USITC No. 12–5–260,
expiration date June 30, 2014. Public reporting
burden for the request is estimated to average 15
hours per response. Please send comments
regarding the accuracy of this burden estimate to
the Office of Investigations, U.S. International Trade
Commission, 500 E Street, SW., Washington, DC
20436.
PO 00000
Frm 00072
Fmt 4703
Sfmt 4703
67473
Commission should contact the Office
of the Secretary at (202) 205–2000.
General information concerning the
Commission may also be obtained by
accessing it’s Internet server (https://
www.usitc.gov). The public record for
these reviews may be viewed on the
Commission’s electronic docket (EDIS)
at https://edis.usitc.gov.
SUPPLEMENTARY INFORMATION:
Background.— On February 23, 2001,
the Department of Commerce
(‘‘Commerce’’) issued antidumping duty
orders on imports of stainless steel buttweld pipe fittings from Italy, Malaysia,
and the Philippines (66 FR 11257).
Following five-year reviews by
Commerce and the Commission,
effective December 11, 2006, Commerce
issued a continuation of the
antidumping duty orders on imports of
stainless steel butt-weld pipe fittings
from Italy, Malaysia, and the
Philippines (71 FR 71530). The
Commission is now conducting second
reviews to determine whether
revocation of the orders would be likely
to lead to continuation or recurrence of
material injury to the domestic industry
within a reasonably foreseeable time. It
will assess the adequacy of interested
party responses to this notice of
institution to determine whether to
conduct full or expedited reviews. The
Commission’s determinations in any
expedited reviews will be based on the
facts available, which may include
information provided in response to this
notice.
Definitions.—The following
definitions apply to these reviews:
(1) Subject Merchandise is the class or
kind of merchandise that is within the
scope of the five-year reviews, as
defined by the Department of
Commerce.
(2) The Subject Countries in these
reviews are Italy, Malaysia, and the
Philippines.
(3) The Domestic Like Product is the
domestically produced product or
products which are like, or in the
absence of like, most similar in
characteristics and uses with, the
Subject Merchandise. In its original
determinations and its full five-year
review determinations, the Commission
defined the Domestic Like Product as all
finished and unfinished stainless steel
butt-weld pipe fittings having an
outside diameter (based on nominal
pipe size) of less than 14 inches,
coextensive with Commerce’s scope.
Commerce specifically excluded from
the scope definition cast fittings;
threaded, grooved, and bolted fittings;
and fittings made from any material
other than stainless steel.
E:\FR\FM\01NON1.SGM
01NON1
Agencies
[Federal Register Volume 76, Number 211 (Tuesday, November 1, 2011)]
[Notices]
[Page 67473]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-28261]
-----------------------------------------------------------------------
DEPARTMENT OF THE INTERIOR
Bureau of Land Management
[CACA 43949, LLCA930000, L14300000.ET0000]
Notice of Proposed Withdrawal, Transfer of Jurisdiction, and
Notice of Public Meeting; California
AGENCY: Bureau of Land Management, Interior.
ACTION: Notice; Correction.
-----------------------------------------------------------------------
SUMMARY: The Bureau of Land Management (BLM) published a notice in the
Federal Register on December 31, 2003, (68 FR 75628) that contained an
erroneous legal description. This correction also supersedes and
replaces the correction made on November 17, 2010 (75 FR 70288).
Correction
On page 75628 in the second column, line 12, the acreage is
corrected to read 3,385 acres of public lands for use as a mountain
warfare training facility.
On page 75628 in the second column, lines 56 and 57, correct the
legal description to read: sec. 24, lots 4, 5, 20, 22, 24, 26, and
SW\1/4\SW\1/4\; and sec. 25, all;
On page 75628 in the third column, line 2, the acreage is corrected
to read 3,385 acres in San Diego County.
FOR FURTHER INFORMATION CONTACT: Heather Fullerton, Realty Specialist,
BLM, California State Office, 2800 Cottage Way, Suite W-1834,
Sacramento, California 95825, or phone (916) 978-4634.
Tom Pogacnik,
Deputy State Director for Natural Resources.
[FR Doc. 2011-28261 Filed 10-31-11; 8:45 am]
BILLING CODE 4310-40-P